[SCSI] lpfc 8.3.14: PCI fixes and enhancements

- Allow enabling MSI-X intterupts with fewer vectors than requested
  by looking at the return value from pci_enable_msix.
- Implemented driver PCI AER error handling routines for supporting
  AER error recovering on SLI4 devices.
- Remove redundant SLI_ACTIVE checks

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
This commit is contained in:
James Smart 2010-06-08 18:31:21 -04:00 committed by James Bottomley
parent c20c426732
commit 75baf69657
5 changed files with 228 additions and 41 deletions

View file

@ -864,7 +864,6 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
uint32_t *mrpi, uint32_t *arpi,
uint32_t *mvpi, uint32_t *avpi)
{
struct lpfc_sli *psli = &phba->sli;
struct lpfc_mbx_read_config *rd_config;
LPFC_MBOXQ_t *pmboxq;
MAILBOX_t *pmb;
@ -893,8 +892,7 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
pmb->mbxOwner = OWN_HOST;
pmboxq->context1 = NULL;
if ((phba->pport->fc_flag & FC_OFFLINE_MODE) ||
(!(psli->sli_flag & LPFC_SLI_ACTIVE)))
if (phba->pport->fc_flag & FC_OFFLINE_MODE)
rc = MBX_NOT_FINISHED;
else
rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@ -2943,9 +2941,6 @@ lpfc_aer_support_store(struct device *dev, struct device_attribute *attr,
struct lpfc_hba *phba = vport->phba;
int val = 0, rc = -EINVAL;
/* AER not supported on OC devices yet */
if (phba->pci_dev_grp == LPFC_PCI_DEV_OC)
return -EPERM;
if (!isdigit(buf[0]))
return -EINVAL;
if (sscanf(buf, "%i", &val) != 1)
@ -3018,12 +3013,6 @@ lpfc_param_show(aer_support)
static int
lpfc_aer_support_init(struct lpfc_hba *phba, int val)
{
/* AER not supported on OC devices yet */
if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) {
phba->cfg_aer_support = 0;
return -EPERM;
}
if (val == 0 || val == 1) {
phba->cfg_aer_support = val;
return 0;
@ -3068,9 +3057,6 @@ lpfc_aer_cleanup_state(struct device *dev, struct device_attribute *attr,
struct lpfc_hba *phba = vport->phba;
int val, rc = -1;
/* AER not supported on OC devices yet */
if (phba->pci_dev_grp == LPFC_PCI_DEV_OC)
return -EPERM;
if (!isdigit(buf[0]))
return -EINVAL;
if (sscanf(buf, "%i", &val) != 1)
@ -4099,8 +4085,7 @@ lpfc_get_stats(struct Scsi_Host *shost)
pmboxq->context1 = NULL;
pmboxq->vport = vport;
if ((vport->fc_flag & FC_OFFLINE_MODE) ||
(!(psli->sli_flag & LPFC_SLI_ACTIVE)))
if (vport->fc_flag & FC_OFFLINE_MODE)
rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
else
rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@ -4124,8 +4109,7 @@ lpfc_get_stats(struct Scsi_Host *shost)
pmboxq->context1 = NULL;
pmboxq->vport = vport;
if ((vport->fc_flag & FC_OFFLINE_MODE) ||
(!(psli->sli_flag & LPFC_SLI_ACTIVE)))
if (vport->fc_flag & FC_OFFLINE_MODE)
rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
else
rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);

View file

@ -7030,22 +7030,28 @@ lpfc_sli_disable_intr(struct lpfc_hba *phba)
static int
lpfc_sli4_enable_msix(struct lpfc_hba *phba)
{
int rc, index;
int vectors, rc, index;
/* Set up MSI-X multi-message vectors */
for (index = 0; index < phba->sli4_hba.cfg_eqn; index++)
phba->sli4_hba.msix_entries[index].entry = index;
/* Configure MSI-X capability structure */
vectors = phba->sli4_hba.cfg_eqn;
enable_msix_vectors:
rc = pci_enable_msix(phba->pcidev, phba->sli4_hba.msix_entries,
phba->sli4_hba.cfg_eqn);
if (rc) {
vectors);
if (rc > 1) {
vectors = rc;
goto enable_msix_vectors;
} else if (rc) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0484 PCI enable MSI-X failed (%d)\n", rc);
goto msi_fail_out;
}
/* Log MSI-X vector assignment */
for (index = 0; index < phba->sli4_hba.cfg_eqn; index++)
for (index = 0; index < vectors; index++)
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0489 MSI-X entry[%d]: vector=x%x "
"message=%d\n", index,
@ -7067,7 +7073,7 @@ lpfc_sli4_enable_msix(struct lpfc_hba *phba)
}
/* The rest of the vector(s) are associated to fast-path handler(s) */
for (index = 1; index < phba->sli4_hba.cfg_eqn; index++) {
for (index = 1; index < vectors; index++) {
phba->sli4_hba.fcp_eq_hdl[index - 1].idx = index - 1;
phba->sli4_hba.fcp_eq_hdl[index - 1].phba = phba;
rc = request_irq(phba->sli4_hba.msix_entries[index].vector,
@ -7081,6 +7087,7 @@ lpfc_sli4_enable_msix(struct lpfc_hba *phba)
goto cfg_fail_out;
}
}
phba->sli4_hba.msix_vec_nr = vectors;
return rc;
@ -7114,9 +7121,10 @@ lpfc_sli4_disable_msix(struct lpfc_hba *phba)
/* Free up MSI-X multi-message vectors */
free_irq(phba->sli4_hba.msix_entries[0].vector, phba);
for (index = 1; index < phba->sli4_hba.cfg_eqn; index++)
for (index = 1; index < phba->sli4_hba.msix_vec_nr; index++)
free_irq(phba->sli4_hba.msix_entries[index].vector,
&phba->sli4_hba.fcp_eq_hdl[index - 1]);
/* Disable MSI-X */
pci_disable_msix(phba->pcidev);
@ -7158,6 +7166,7 @@ lpfc_sli4_enable_msi(struct lpfc_hba *phba)
pci_disable_msi(phba->pcidev);
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
"0490 MSI request_irq failed (%d)\n", rc);
return rc;
}
for (index = 0; index < phba->cfg_fcp_eq_count; index++) {
@ -7165,7 +7174,7 @@ lpfc_sli4_enable_msi(struct lpfc_hba *phba)
phba->sli4_hba.fcp_eq_hdl[index].phba = phba;
}
return rc;
return 0;
}
/**
@ -7876,6 +7885,9 @@ lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba)
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2710 PCI channel disable preparing for reset\n");
/* Block any management I/Os to the device */
lpfc_block_mgmt_io(phba);
/* Block all SCSI devices' I/Os on the host */
lpfc_scsi_dev_block(phba);
@ -7885,6 +7897,7 @@ lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba)
/* Disable interrupt and pci device */
lpfc_sli_disable_intr(phba);
pci_disable_device(phba->pcidev);
/* Flush all driver's outstanding SCSI I/Os as we are to reset */
lpfc_sli_flush_fcp_rings(phba);
}
@ -7898,7 +7911,7 @@ lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba)
* pending I/Os.
**/
static void
lpfc_prep_dev_for_perm_failure(struct lpfc_hba *phba)
lpfc_sli_prep_dev_for_perm_failure(struct lpfc_hba *phba)
{
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2711 PCI channel permanent disable for failure\n");
@ -7947,7 +7960,7 @@ lpfc_io_error_detected_s3(struct pci_dev *pdev, pci_channel_state_t state)
return PCI_ERS_RESULT_NEED_RESET;
case pci_channel_io_perm_failure:
/* Permanent failure, prepare for device down */
lpfc_prep_dev_for_perm_failure(phba);
lpfc_sli_prep_dev_for_perm_failure(phba);
return PCI_ERS_RESULT_DISCONNECT;
default:
/* Unknown state, prepare and request slot reset */
@ -8016,7 +8029,8 @@ lpfc_io_slot_reset_s3(struct pci_dev *pdev)
} else
phba->intr_mode = intr_mode;
/* Take device offline; this will perform cleanup */
/* Take device offline, it will perform cleanup */
lpfc_offline_prep(phba);
lpfc_offline(phba);
lpfc_sli_brdrestart(phba);
@ -8201,6 +8215,8 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
/* Default to single FCP EQ for non-MSI-X */
if (phba->intr_type != MSIX)
phba->cfg_fcp_eq_count = 1;
else if (phba->sli4_hba.msix_vec_nr < phba->cfg_fcp_eq_count)
phba->cfg_fcp_eq_count = phba->sli4_hba.msix_vec_nr - 1;
/* Set up SLI-4 HBA */
if (lpfc_sli4_hba_setup(phba)) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@ -8362,7 +8378,7 @@ lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg)
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0298 PCI device Power Management suspend.\n");
"2843 PCI device Power Management suspend.\n");
/* Bring down the device */
lpfc_offline_prep(phba);
@ -8452,6 +8468,84 @@ lpfc_pci_resume_one_s4(struct pci_dev *pdev)
return 0;
}
/**
* lpfc_sli4_prep_dev_for_recover - Prepare SLI4 device for pci slot recover
* @phba: pointer to lpfc hba data structure.
*
* This routine is called to prepare the SLI4 device for PCI slot recover. It
* aborts all the outstanding SCSI I/Os to the pci device.
**/
static void
lpfc_sli4_prep_dev_for_recover(struct lpfc_hba *phba)
{
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2828 PCI channel I/O abort preparing for recovery\n");
/*
* There may be errored I/Os through HBA, abort all I/Os on txcmplq
* and let the SCSI mid-layer to retry them to recover.
*/
pring = &psli->ring[psli->fcp_ring];
lpfc_sli_abort_iocb_ring(phba, pring);
}
/**
* lpfc_sli4_prep_dev_for_reset - Prepare SLI4 device for pci slot reset
* @phba: pointer to lpfc hba data structure.
*
* This routine is called to prepare the SLI4 device for PCI slot reset. It
* disables the device interrupt and pci device, and aborts the internal FCP
* pending I/Os.
**/
static void
lpfc_sli4_prep_dev_for_reset(struct lpfc_hba *phba)
{
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2826 PCI channel disable preparing for reset\n");
/* Block any management I/Os to the device */
lpfc_block_mgmt_io(phba);
/* Block all SCSI devices' I/Os on the host */
lpfc_scsi_dev_block(phba);
/* stop all timers */
lpfc_stop_hba_timers(phba);
/* Disable interrupt and pci device */
lpfc_sli4_disable_intr(phba);
pci_disable_device(phba->pcidev);
/* Flush all driver's outstanding SCSI I/Os as we are to reset */
lpfc_sli_flush_fcp_rings(phba);
}
/**
* lpfc_sli4_prep_dev_for_perm_failure - Prepare SLI4 dev for pci slot disable
* @phba: pointer to lpfc hba data structure.
*
* This routine is called to prepare the SLI4 device for PCI slot permanently
* disabling. It blocks the SCSI transport layer traffic and flushes the FCP
* pending I/Os.
**/
static void
lpfc_sli4_prep_dev_for_perm_failure(struct lpfc_hba *phba)
{
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2827 PCI channel permanent disable for failure\n");
/* Block all SCSI devices' I/Os on the host */
lpfc_scsi_dev_block(phba);
/* stop all timers */
lpfc_stop_hba_timers(phba);
/* Clean up all driver's outstanding SCSI I/Os */
lpfc_sli_flush_fcp_rings(phba);
}
/**
* lpfc_io_error_detected_s4 - Method for handling PCI I/O error to SLI-4 device
* @pdev: pointer to PCI device.
@ -8471,7 +8565,29 @@ lpfc_pci_resume_one_s4(struct pci_dev *pdev)
static pci_ers_result_t
lpfc_io_error_detected_s4(struct pci_dev *pdev, pci_channel_state_t state)
{
return PCI_ERS_RESULT_NEED_RESET;
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
switch (state) {
case pci_channel_io_normal:
/* Non-fatal error, prepare for recovery */
lpfc_sli4_prep_dev_for_recover(phba);
return PCI_ERS_RESULT_CAN_RECOVER;
case pci_channel_io_frozen:
/* Fatal error, prepare for slot reset */
lpfc_sli4_prep_dev_for_reset(phba);
return PCI_ERS_RESULT_NEED_RESET;
case pci_channel_io_perm_failure:
/* Permanent failure, prepare for device down */
lpfc_sli4_prep_dev_for_perm_failure(phba);
return PCI_ERS_RESULT_DISCONNECT;
default:
/* Unknown state, prepare and request slot reset */
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2825 Unknown PCI error state: x%x\n", state);
lpfc_sli4_prep_dev_for_reset(phba);
return PCI_ERS_RESULT_NEED_RESET;
}
}
/**
@ -8495,6 +8611,39 @@ lpfc_io_error_detected_s4(struct pci_dev *pdev, pci_channel_state_t state)
static pci_ers_result_t
lpfc_io_slot_reset_s4(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
struct lpfc_sli *psli = &phba->sli;
uint32_t intr_mode;
dev_printk(KERN_INFO, &pdev->dev, "recovering from a slot reset.\n");
if (pci_enable_device_mem(pdev)) {
printk(KERN_ERR "lpfc: Cannot re-enable "
"PCI device after reset.\n");
return PCI_ERS_RESULT_DISCONNECT;
}
pci_restore_state(pdev);
if (pdev->is_busmaster)
pci_set_master(pdev);
spin_lock_irq(&phba->hbalock);
psli->sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
/* Configure and enable interrupt */
intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode);
if (intr_mode == LPFC_INTR_ERROR) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2824 Cannot re-enable interrupt after "
"slot reset.\n");
return PCI_ERS_RESULT_DISCONNECT;
} else
phba->intr_mode = intr_mode;
/* Log the current active interrupt mode */
lpfc_log_intr_mode(phba, phba->intr_mode);
return PCI_ERS_RESULT_RECOVERED;
}
@ -8511,7 +8660,27 @@ lpfc_io_slot_reset_s4(struct pci_dev *pdev)
static void
lpfc_io_resume_s4(struct pci_dev *pdev)
{
return;
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
/*
* In case of slot reset, as function reset is performed through
* mailbox command which needs DMA to be enabled, this operation
* has to be moved to the io resume phase. Taking device offline
* will perform the necessary cleanup.
*/
if (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE)) {
/* Perform device reset */
lpfc_offline_prep(phba);
lpfc_offline(phba);
lpfc_sli_brdrestart(phba);
/* Bring the device back online */
lpfc_online(phba);
}
/* Clean up Advanced Error Reporting (AER) if needed */
if (phba->hba_flag & HBA_AER_ENABLED)
pci_cleanup_aer_uncorrect_error_status(pdev);
}
/**

View file

@ -2295,15 +2295,21 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
struct lpfc_vport *vport = pIocbIn->vport;
struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
struct lpfc_nodelist *pnode = rdata->pnode;
struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
struct scsi_cmnd *cmd;
int result;
struct scsi_device *tmp_sdev;
int depth;
unsigned long flags;
struct lpfc_fast_path_event *fast_path_evt;
struct Scsi_Host *shost = cmd->device->host;
struct Scsi_Host *shost;
uint32_t queue_depth, scsi_id;
/* Sanity check on return of outstanding command */
if (!(lpfc_cmd->pCmd))
return;
cmd = lpfc_cmd->pCmd;
shost = cmd->device->host;
lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4];
lpfc_cmd->status = pIocbOut->iocb.ulpStatus;
/* pick up SLI4 exhange busy status from HBA */

View file

@ -3593,13 +3593,16 @@ static int
lpfc_sli_brdrestart_s4(struct lpfc_hba *phba)
{
struct lpfc_sli *psli = &phba->sli;
uint32_t hba_aer_enabled;
/* Restart HBA */
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
"0296 Restart HBA Data: x%x x%x\n",
phba->pport->port_state, psli->sli_flag);
/* Take PCIe device Advanced Error Reporting (AER) state */
hba_aer_enabled = phba->hba_flag & HBA_AER_ENABLED;
lpfc_sli4_brdreset(phba);
spin_lock_irq(&phba->hbalock);
@ -3611,6 +3614,10 @@ lpfc_sli_brdrestart_s4(struct lpfc_hba *phba)
memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets));
psli->stats_start = get_seconds();
/* Reset HBA AER if it was enabled, note hba_flag was reset above */
if (hba_aer_enabled)
pci_disable_pcie_error_reporting(phba->pcidev);
lpfc_hba_down_post(phba);
return 0;
@ -4554,6 +4561,24 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
/* Start error attention (ERATT) polling timer */
mod_timer(&phba->eratt_poll, jiffies + HZ * LPFC_ERATT_POLL_INTERVAL);
/* Enable PCIe device Advanced Error Reporting (AER) if configured */
if (phba->cfg_aer_support == 1 && !(phba->hba_flag & HBA_AER_ENABLED)) {
rc = pci_enable_pcie_error_reporting(phba->pcidev);
if (!rc) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"2829 This device supports "
"Advanced Error Reporting (AER)\n");
spin_lock_irq(&phba->hbalock);
phba->hba_flag |= HBA_AER_ENABLED;
spin_unlock_irq(&phba->hbalock);
} else {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"2830 This device does not support "
"Advanced Error Reporting (AER)\n");
phba->cfg_aer_support = 0;
}
}
/*
* The port is ready, set the host's link state to LINK_DOWN
* in preparation for link interrupts.
@ -9089,9 +9114,10 @@ lpfc_sli4_sp_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe)
}
}
if (unlikely(!cq)) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0365 Slow-path CQ identifier (%d) does "
"not exist\n", cqid);
if (phba->sli.sli_flag & LPFC_SLI_ACTIVE)
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0365 Slow-path CQ identifier "
"(%d) does not exist\n", cqid);
return;
}
@ -9321,9 +9347,10 @@ lpfc_sli4_fp_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe,
cq = phba->sli4_hba.fcp_cq[fcp_cqidx];
if (unlikely(!cq)) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0367 Fast-path completion queue does not "
"exist\n");
if (phba->sli.sli_flag & LPFC_SLI_ACTIVE)
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0367 Fast-path completion queue "
"does not exist\n");
return;
}

View file

@ -382,6 +382,7 @@ struct lpfc_sli4_hba {
struct lpfc_pc_sli4_params pc_sli4_params;
struct msix_entry *msix_entries;
uint32_t cfg_eqn;
uint32_t msix_vec_nr;
struct lpfc_fcp_eq_hdl *fcp_eq_hdl; /* FCP per-WQ handle */
/* Pointers to the constructed SLI4 queues */
struct lpfc_queue **fp_eq; /* Fast-path event queue */