usb: core: implement AMD remote wakeup quirk
The following patch is required to resolve remote wake issues with certain devices. Issue description: If the remote wake is issued from the device in a specific timing condition while the system is entering sleep state then it may cause system to auto wake on subsequent sleep cycle. Root cause: Host controller rebroadcasts the Resume signal > 100 µseconds after receiving the original resume event from the device. For proper function, some devices may require the rebroadcast of resume event within the USB spec of 100µS. Workaroud: 1. Filter the AMD platforms with Yangtze chipset, then judge of all the usb devices are mouse or not. And get out the port id which attached a mouse with Pixart controller. 2. Then reset the port which attached issue device during system resume from S3. [Q] Why the special devices are only mice? Would high speed devices such as 3G modem or USB Bluetooth adapter trigger this issue? - Current this sensitivity is only confined to devices that use Pixart controllers. This controller is designed for use with LS mouse devices only. We have not observed any other devices failing. There may be a small risk for other devices also but this patch (reset device in resume phase) will cover the cases if required. [Q] Shouldn’t the resume signal be sent within 100 us for every device? - The Host controller may not send the resume signal within 100us, this our host controller specification change. This is why we require the patch to prevent side effects on certain known devices. [Q] Why would clicking mouse INTENSELY to wake the system up trigger this issue? - This behavior is specific to the devices that use Pixart controller. It is timing dependent on when the resume event is triggered during the sleep state. [Q] Is it a host controller issue or mouse? - It is the host controller behavior during resume that triggers the device incorrect behavior on the next resume. This patch sets USB_QUIRK_RESET_RESUME flag for these Pixart-based mice when they attached to platforms with AMD Yangtze chipset. Signed-off-by: Huang Rui <ray.huang@amd.com> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
parent
22b4f0cd1d
commit
7868943db1
|
@ -215,6 +215,9 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
|||
goto disable_pci;
|
||||
}
|
||||
|
||||
hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
|
||||
driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
|
||||
|
||||
if (driver->flags & HCD_MEMORY) {
|
||||
/* EHCI, OHCI */
|
||||
hcd->rsrc_start = pci_resource_start(dev, 0);
|
||||
|
|
|
@ -13,6 +13,7 @@
|
|||
|
||||
#include <linux/usb.h>
|
||||
#include <linux/usb/quirks.h>
|
||||
#include <linux/usb/hcd.h>
|
||||
#include "usb.h"
|
||||
|
||||
/* Lists of quirky USB devices, split in device quirks and interface quirks.
|
||||
|
@ -155,6 +156,21 @@ static const struct usb_device_id usb_interface_quirk_list[] = {
|
|||
{ } /* terminating entry must be last */
|
||||
};
|
||||
|
||||
static const struct usb_device_id usb_amd_resume_quirk_list[] = {
|
||||
/* Lenovo Mouse with Pixart controller */
|
||||
{ USB_DEVICE(0x17ef, 0x602e), .driver_info = USB_QUIRK_RESET_RESUME },
|
||||
|
||||
/* Pixart Mouse */
|
||||
{ USB_DEVICE(0x093a, 0x2500), .driver_info = USB_QUIRK_RESET_RESUME },
|
||||
{ USB_DEVICE(0x093a, 0x2510), .driver_info = USB_QUIRK_RESET_RESUME },
|
||||
{ USB_DEVICE(0x093a, 0x2521), .driver_info = USB_QUIRK_RESET_RESUME },
|
||||
|
||||
/* Logitech Optical Mouse M90/M100 */
|
||||
{ USB_DEVICE(0x046d, 0xc05a), .driver_info = USB_QUIRK_RESET_RESUME },
|
||||
|
||||
{ } /* terminating entry must be last */
|
||||
};
|
||||
|
||||
static bool usb_match_any_interface(struct usb_device *udev,
|
||||
const struct usb_device_id *id)
|
||||
{
|
||||
|
@ -181,6 +197,18 @@ static bool usb_match_any_interface(struct usb_device *udev,
|
|||
return false;
|
||||
}
|
||||
|
||||
int usb_amd_resume_quirk(struct usb_device *udev)
|
||||
{
|
||||
struct usb_hcd *hcd;
|
||||
|
||||
hcd = bus_to_hcd(udev->bus);
|
||||
/* The device should be attached directly to root hub */
|
||||
if (udev->level == 1 && hcd->amd_resume_bug == 1)
|
||||
return 1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static u32 __usb_detect_quirks(struct usb_device *udev,
|
||||
const struct usb_device_id *id)
|
||||
{
|
||||
|
@ -206,6 +234,15 @@ static u32 __usb_detect_quirks(struct usb_device *udev,
|
|||
void usb_detect_quirks(struct usb_device *udev)
|
||||
{
|
||||
udev->quirks = __usb_detect_quirks(udev, usb_quirk_list);
|
||||
|
||||
/*
|
||||
* Pixart-based mice would trigger remote wakeup issue on AMD
|
||||
* Yangtze chipset, so set them as RESET_RESUME flag.
|
||||
*/
|
||||
if (usb_amd_resume_quirk(udev))
|
||||
udev->quirks |= __usb_detect_quirks(udev,
|
||||
usb_amd_resume_quirk_list);
|
||||
|
||||
if (udev->quirks)
|
||||
dev_dbg(&udev->dev, "USB quirks for this device: %x\n",
|
||||
udev->quirks);
|
||||
|
|
|
@ -250,6 +250,18 @@ commit:
|
|||
}
|
||||
EXPORT_SYMBOL_GPL(usb_amd_find_chipset_info);
|
||||
|
||||
int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev)
|
||||
{
|
||||
/* Make sure amd chipset type has already been initialized */
|
||||
usb_amd_find_chipset_info();
|
||||
if (amd_chipset.sb_type.gen != AMD_CHIPSET_YANGTZE)
|
||||
return 0;
|
||||
|
||||
dev_dbg(&pdev->dev, "QUIRK: Enable AMD remote wakeup fix\n");
|
||||
return 1;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(usb_hcd_amd_remote_wakeup_quirk);
|
||||
|
||||
/*
|
||||
* The hardware normally enables the A-link power management feature, which
|
||||
* lets the system lower the power consumption in idle states.
|
||||
|
|
|
@ -141,6 +141,7 @@ struct usb_hcd {
|
|||
unsigned wireless:1; /* Wireless USB HCD */
|
||||
unsigned authorized_default:1;
|
||||
unsigned has_tt:1; /* Integrated TT in root hub */
|
||||
unsigned amd_resume_bug:1; /* AMD remote wakeup quirk */
|
||||
|
||||
unsigned int irq; /* irq allocated */
|
||||
void __iomem *regs; /* device memory/io */
|
||||
|
@ -435,6 +436,8 @@ extern int usb_hcd_pci_probe(struct pci_dev *dev,
|
|||
extern void usb_hcd_pci_remove(struct pci_dev *dev);
|
||||
extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
|
||||
|
||||
extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
|
||||
#endif
|
||||
|
|
Loading…
Reference in a new issue