ARM: dts: gr8: Add support for the GR8 evaluation board
The GR8-EVB is a small board with an NextThing GR8, an Hynix MLC NAND, an AXP209 PMIC, USB host and OTG, an SPDIF output and a connectors for CSI, I2S and LCD. Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
This commit is contained in:
parent
e8f4351a3e
commit
7a988a4dd2
|
@ -719,6 +719,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
|
|||
sun4i-a10-pcduino2.dtb \
|
||||
sun4i-a10-pov-protab2-ips9.dtb
|
||||
dtb-$(CONFIG_MACH_SUN5I) += \
|
||||
ntc-gr8-evb.dtb \
|
||||
sun5i-a10s-auxtek-t003.dtb \
|
||||
sun5i-a10s-auxtek-t004.dtb \
|
||||
sun5i-a10s-mk802.dtb \
|
||||
|
|
342
arch/arm/boot/dts/ntc-gr8-evb.dts
Normal file
342
arch/arm/boot/dts/ntc-gr8-evb.dts
Normal file
|
@ -0,0 +1,342 @@
|
|||
/*
|
||||
* Copyright 2016 Free Electrons
|
||||
* Copyright 2016 NextThing Co
|
||||
*
|
||||
* Mylène Josserand <mylene.josserand@free-electrons.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "ntc-gr8.dtsi"
|
||||
#include "sunxi-common-regulators.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
/ {
|
||||
model = "NextThing GR8-EVB";
|
||||
compatible = "nextthing,gr8-evb", "nextthing,gr8";
|
||||
|
||||
aliases {
|
||||
i2c0 = &i2c0;
|
||||
i2c1 = &i2c1;
|
||||
i2c2 = &i2c2;
|
||||
serial0 = &uart1;
|
||||
serial1 = &uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm 0 10000 0>;
|
||||
enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
|
||||
default-brightness-level = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
&be0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&codec {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins_a>;
|
||||
status = "okay";
|
||||
|
||||
axp209: pmic@34 {
|
||||
reg = <0x34>;
|
||||
|
||||
/*
|
||||
* The interrupt is routed through the "External Fast
|
||||
* Interrupt Request" pin (ball G13 of the module)
|
||||
* directly to the main interrupt controller, without
|
||||
* any other controller interfering.
|
||||
*/
|
||||
interrupts = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
#include "axp209.dtsi"
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins_a>;
|
||||
status = "okay";
|
||||
|
||||
wm8978: codec@1a {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "wlf,wm8978";
|
||||
reg = <0x1a>;
|
||||
};
|
||||
|
||||
pcf8563: rtc@51 {
|
||||
compatible = "phg,pcf8563";
|
||||
reg = <0x51>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ir0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ir0_rx_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&lradc {
|
||||
vref-supply = <®_ldo2>;
|
||||
status = "okay";
|
||||
|
||||
button@190 {
|
||||
label = "Volume Up";
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
channel = <0>;
|
||||
voltage = <190000>;
|
||||
};
|
||||
|
||||
button@390 {
|
||||
label = "Volume Down";
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
channel = <0>;
|
||||
voltage = <390000>;
|
||||
};
|
||||
|
||||
button@600 {
|
||||
label = "Menu";
|
||||
linux,code = <KEY_MENU>;
|
||||
channel = <0>;
|
||||
voltage = <600000>;
|
||||
};
|
||||
|
||||
button@800 {
|
||||
label = "Search";
|
||||
linux,code = <KEY_SEARCH>;
|
||||
channel = <0>;
|
||||
voltage = <800000>;
|
||||
};
|
||||
|
||||
button@980 {
|
||||
label = "Home";
|
||||
linux,code = <KEY_HOMEPAGE>;
|
||||
channel = <0>;
|
||||
voltage = <980000>;
|
||||
};
|
||||
|
||||
button@1180 {
|
||||
label = "Esc";
|
||||
linux,code = <KEY_ESC>;
|
||||
channel = <0>;
|
||||
voltage = <1180000>;
|
||||
};
|
||||
|
||||
button@1400 {
|
||||
label = "Enter";
|
||||
linux,code = <KEY_ENTER>;
|
||||
channel = <0>;
|
||||
voltage = <1400000>;
|
||||
};
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gr8_evb>;
|
||||
vmmc-supply = <®_vcc3v3>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
|
||||
cd-inverted;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&nfc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
|
||||
|
||||
/* MLC Support sucks for now */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&ohci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&otg_sram {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pio {
|
||||
mmc0_cd_pin_gr8_evb: mmc0-cd-pin@0 {
|
||||
allwinner,pins = "PG0";
|
||||
allwinner,function = "gpio_in";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
};
|
||||
|
||||
usb0_id_pin_gr8_evb: usb0-id-pin@0 {
|
||||
allwinner,pins = "PG2";
|
||||
allwinner,function = "gpio_in";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
};
|
||||
|
||||
usb0_vbus_det_pin_gr8_evb: usb0-vbus-det-pin@0 {
|
||||
allwinner,pins = "PG1";
|
||||
allwinner,function = "gpio_in";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
};
|
||||
|
||||
usb1_vbus_pin_gr8_evb: usb1-vbus-pin@0 {
|
||||
allwinner,pins = "PG13";
|
||||
allwinner,function = "gpio_out";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
};
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm0_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
®_dcdc2 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-name = "vdd-cpu";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
®_dcdc3 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-name = "vdd-sys";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
®_ldo1 {
|
||||
regulator-name = "vdd-rtc";
|
||||
};
|
||||
|
||||
®_ldo2 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "avcc";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
®_usb1_vbus {
|
||||
pinctrl-0 = <&usb1_vbus_pin_gr8_evb>;
|
||||
gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rtp {
|
||||
allwinner,ts-attached;
|
||||
};
|
||||
|
||||
&spdif {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spdif_tx_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tve0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_pins_a>, <&uart1_cts_rts_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_otg {
|
||||
/*
|
||||
* The GR8-EVB has a somewhat interesting design. There's a
|
||||
* pin supposed to control VBUS, an ID pin, a VBUS detect pin,
|
||||
* so everything should work just fine.
|
||||
*
|
||||
* Except that the pin supposed to control VBUS is not
|
||||
* connected to any controllable output, neither to the SoC
|
||||
* through a GPIO or to the PMIC, and it is pulled down,
|
||||
* meaning that we will never be able to enable VBUS on this
|
||||
* board.
|
||||
*/
|
||||
dr_mode = "otg";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_power_supply {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb0_id_pin_gr8_evb>, <&usb0_vbus_det_pin_gr8_evb>;
|
||||
usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
|
||||
usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
|
||||
usb0_vbus_power-supply = <&usb_power_supply>;
|
||||
usb1_vbus-supply = <®_usb1_vbus>;
|
||||
status = "okay";
|
||||
};
|
Loading…
Reference in a new issue