m68knommu: add basic support for the ColdFire based FireBee board

The FireBee is a ColdFire 5475 based board. Add a configuration option
to support it, and the basic platform flash layout code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

arch/m68knommu/Kconfig

@@ -519,6 +519,12 @@ config M5407C3
 	help
 	  Support for the Motorola M5407C3 board.
 
+config FIREBEE
+	bool "FireBee board support"
+	depends on M547x
+	help
+	  Support for the FireBee ColdFire 5475 based board.
+
 config CLEOPATRA
 	bool "Feith CLEOPATRA board support"
 	depends on (M5307 || M5407)

arch/m68knommu/platform/54xx/Makefile

@@ -15,4 +15,5 @@
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
 obj-y := config.o
+obj-$(CONFIG_FIREBEE) += firebee.o
 

arch/m68knommu/platform/54xx/firebee.c

@@ -0,0 +1,86 @@
+/***************************************************************************/
+
+/*
+ *	firebee.c -- extra startup code support for the FireBee boards
+ *
+ *	Copyright (C) 2011, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+
+/*
+ *	8MB of NOR flash fitted to the FireBee board.
+ */
+#define	FLASH_PHYS_ADDR		0xe0000000	/* Physical address of flash */
+#define	FLASH_PHYS_SIZE		0x00800000	/* Size of flash */
+
+#define	PART_BOOT_START		0x00000000	/* Start at bottom of flash */
+#define	PART_BOOT_SIZE		0x00040000	/* 256k in size */
+#define	PART_IMAGE_START	0x00040000	/* Start after boot loader */
+#define	PART_IMAGE_SIZE		0x006c0000	/* Most of flash */
+#define	PART_FPGA_START		0x00700000	/* Start at offset 7MB */
+#define	PART_FPGA_SIZE		0x00100000	/* 1MB in size */
+
+static struct mtd_partition firebee_flash_parts[] = {
+	{
+		.name	= "dBUG",
+		.offset	= PART_BOOT_START,
+		.size	= PART_BOOT_SIZE,
+	},
+	{
+		.name	= "FPGA",
+		.offset	= PART_FPGA_START,
+		.size	= PART_FPGA_SIZE,
+	},
+	{
+		.name	= "image",
+		.offset	= PART_IMAGE_START,
+		.size	= PART_IMAGE_SIZE,
+	},
+};
+
+static struct physmap_flash_data firebee_flash_data = {
+	.width		= 2,
+	.nr_parts	= ARRAY_SIZE(firebee_flash_parts),
+	.parts		= firebee_flash_parts,
+};
+
+static struct resource firebee_flash_resource = {
+	.start		= FLASH_PHYS_ADDR,
+	.end		= FLASH_PHYS_ADDR + FLASH_PHYS_SIZE,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device firebee_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &firebee_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &firebee_flash_resource,
+};
+
+/***************************************************************************/
+
+static int __init init_firebee(void)
+{
+	platform_device_register(&firebee_flash);
+	return 0;
+}
+
+arch_initcall(init_firebee);
+
+/***************************************************************************/