diff --git a/Documentation/ABI/stable/sysfs-driver-usb-usbtmc b/Documentation/ABI/stable/sysfs-driver-usb-usbtmc
index 2a7f9a00cb0a..e960cd027e1e 100644
--- a/Documentation/ABI/stable/sysfs-driver-usb-usbtmc
+++ b/Documentation/ABI/stable/sysfs-driver-usb-usbtmc
@@ -1,5 +1,5 @@
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/interface_capabilities
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/device_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/device_capabilities
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
@@ -12,8 +12,8 @@ Description:
 		The files are read only.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/usb488_interface_capabilities
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/usb488_device_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/usb488_interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/usb488_device_capabilities
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
@@ -27,7 +27,7 @@ Description:
 		The files are read only.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/TermChar
+What:		/sys/bus/usb/drivers/usbtmc/*/TermChar
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
@@ -40,7 +40,7 @@ Description:
 		sent to the device or not.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/TermCharEnabled
+What:		/sys/bus/usb/drivers/usbtmc/*/TermCharEnabled
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
@@ -51,7 +51,7 @@ Description:
 		published by the USB-IF.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/auto_abort
+What:		/sys/bus/usb/drivers/usbtmc/*/auto_abort
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
diff --git a/Documentation/usb/URB.txt b/Documentation/usb/URB.txt
index 8ffce746d496..00d2c644068e 100644
--- a/Documentation/usb/URB.txt
+++ b/Documentation/usb/URB.txt
@@ -168,6 +168,28 @@ that if the completion handler or anyone else tries to resubmit it
 they will get a -EPERM error.  Thus you can be sure that when
 usb_kill_urb() returns, the URB is totally idle.
 
+There is a lifetime issue to consider.  An URB may complete at any
+time, and the completion handler may free the URB.  If this happens
+while usb_unlink_urb or usb_kill_urb is running, it will cause a
+memory-access violation.  The driver is responsible for avoiding this,
+which often means some sort of lock will be needed to prevent the URB
+from being deallocated while it is still in use.
+
+On the other hand, since usb_unlink_urb may end up calling the
+completion handler, the handler must not take any lock that is held
+when usb_unlink_urb is invoked.  The general solution to this problem
+is to increment the URB's reference count while holding the lock, then
+drop the lock and call usb_unlink_urb or usb_kill_urb, and then
+decrement the URB's reference count.  You increment the reference
+count by calling
+
+	struct urb *usb_get_urb(struct urb *urb)
+
+(ignore the return value; it is the same as the argument) and
+decrement the reference count by calling usb_free_urb.  Of course,
+none of this is necessary if there's no danger of the URB being freed
+by the completion handler.
+
 
 1.7. What about the completion handler?
 
diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.txt
index 5335fa8b06eb..c42bb9cd3b43 100644
--- a/Documentation/usb/usbmon.txt
+++ b/Documentation/usb/usbmon.txt
@@ -183,10 +183,10 @@ An input control transfer to get a port status.
 d5ea89a0 3575914555 S Ci:1:001:0 s a3 00 0000 0003 0004 4 <
 d5ea89a0 3575914560 C Ci:1:001:0 0 4 = 01050000
 
-An output bulk transfer to send a SCSI command 0x5E in a 31-byte Bulk wrapper
-to a storage device at address 5:
+An output bulk transfer to send a SCSI command 0x28 (READ_10) in a 31-byte
+Bulk wrapper to a storage device at address 5:
 
-dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 5e000000 00000000 00000600 00000000 00000000 00000000 000000
+dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 ad000000 00800000 80010a28 20000000 20000040 00000000 000000
 dd65f0e8 4128379808 C Bo:1:005:2 0 31 >
 
 * Raw binary format and API
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index cbd8f5f80596..76316a33061b 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -2,14 +2,6 @@
 # USB device configuration
 #
 
-menuconfig USB_SUPPORT
-	bool "USB support"
-	depends on HAS_IOMEM
-	default y
-	---help---
-	  This option adds core support for Universal Serial Bus (USB).
-	  You will also need drivers from the following menu to make use of it.
-
 # many non-PCI SOC chips embed OHCI
 config USB_ARCH_HAS_OHCI
 	boolean
@@ -63,6 +55,14 @@ config USB_ARCH_HAS_XHCI
 	boolean
 	default PCI
 
+menuconfig USB_SUPPORT
+	bool "USB support"
+	depends on HAS_IOMEM
+	default y
+	---help---
+	  This option adds core support for Universal Serial Bus (USB).
+	  You will also need drivers from the following menu to make use of it.
+
 if USB_SUPPORT
 
 config USB_COMMON
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index f8e2d6d52e5c..9a56635dc19c 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1189,8 +1189,13 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
 	if (status == 0) {
 		status = usb_suspend_device(udev, msg);
 
-		/* Again, ignore errors during system sleep transitions */
-		if (!PMSG_IS_AUTO(msg))
+		/*
+		 * Ignore errors from non-root-hub devices during
+		 * system sleep transitions.  For the most part,
+		 * these devices should go to low power anyway when
+		 * the entire bus is suspended.
+		 */
+		if (udev->parent && !PMSG_IS_AUTO(msg))
 			status = 0;
 	}
 
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 9d7fc9a39933..140d3e11f212 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1978,6 +1978,18 @@ int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
 	if (status == 0) {
 		usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
 		hcd->state = HC_STATE_SUSPENDED;
+
+		/* Did we race with a root-hub wakeup event? */
+		if (rhdev->do_remote_wakeup) {
+			char	buffer[6];
+
+			status = hcd->driver->hub_status_data(hcd, buffer);
+			if (status != 0) {
+				dev_dbg(&rhdev->dev, "suspend raced with wakeup event\n");
+				hcd_bus_resume(rhdev, PMSG_AUTO_RESUME);
+				status = -EBUSY;
+			}
+		}
 	} else {
 		spin_lock_irq(&hcd_root_hub_lock);
 		if (!HCD_DEAD(hcd)) {
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 28664eb7f555..a2aa9d652c67 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3163,6 +3163,22 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	if (retval)
 		goto fail;
 
+	/*
+	 * Some superspeed devices have finished the link training process
+	 * and attached to a superspeed hub port, but the device descriptor
+	 * got from those devices show they aren't superspeed devices. Warm
+	 * reset the port attached by the devices can fix them.
+	 */
+	if ((udev->speed == USB_SPEED_SUPER) &&
+			(le16_to_cpu(udev->descriptor.bcdUSB) < 0x0300)) {
+		dev_err(&udev->dev, "got a wrong device descriptor, "
+				"warm reset device\n");
+		hub_port_reset(hub, port1, udev,
+				HUB_BH_RESET_TIME, true);
+		retval = -EINVAL;
+		goto fail;
+	}
+
 	if (udev->descriptor.bMaxPacketSize0 == 0xff ||
 			udev->speed == USB_SPEED_SUPER)
 		i = 512;
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index b3bdfede45e6..aed3e07942d4 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -308,7 +308,8 @@ static void sg_complete(struct urb *urb)
 				retval = usb_unlink_urb(io->urbs [i]);
 				if (retval != -EINPROGRESS &&
 				    retval != -ENODEV &&
-				    retval != -EBUSY)
+				    retval != -EBUSY &&
+				    retval != -EIDRM)
 					dev_err(&io->dev->dev,
 						"%s, unlink --> %d\n",
 						__func__, retval);
@@ -317,7 +318,6 @@ static void sg_complete(struct urb *urb)
 		}
 		spin_lock(&io->lock);
 	}
-	urb->dev = NULL;
 
 	/* on the last completion, signal usb_sg_wait() */
 	io->bytes += urb->actual_length;
@@ -524,7 +524,6 @@ void usb_sg_wait(struct usb_sg_request *io)
 		case -ENXIO:	/* hc didn't queue this one */
 		case -EAGAIN:
 		case -ENOMEM:
-			io->urbs[i]->dev = NULL;
 			retval = 0;
 			yield();
 			break;
@@ -542,7 +541,6 @@ void usb_sg_wait(struct usb_sg_request *io)
 
 			/* fail any uncompleted urbs */
 		default:
-			io->urbs[i]->dev = NULL;
 			io->urbs[i]->status = retval;
 			dev_dbg(&io->dev->dev, "%s, submit --> %d\n",
 				__func__, retval);
@@ -593,7 +591,10 @@ void usb_sg_cancel(struct usb_sg_request *io)
 			if (!io->urbs [i]->dev)
 				continue;
 			retval = usb_unlink_urb(io->urbs [i]);
-			if (retval != -EINPROGRESS && retval != -EBUSY)
+			if (retval != -EINPROGRESS
+					&& retval != -ENODEV
+					&& retval != -EBUSY
+					&& retval != -EIDRM)
 				dev_warn(&io->dev->dev, "%s, unlink --> %d\n",
 					__func__, retval);
 		}
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 7239a73c1b8c..cd9b3a2cd8a7 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -539,6 +539,10 @@ EXPORT_SYMBOL_GPL(usb_submit_urb);
  * never submitted, or it was unlinked before, or the hardware is already
  * finished with it), even if the completion handler has not yet run.
  *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
  * Unlinking and Endpoint Queues:
  *
  * [The behaviors and guarantees described below do not apply to virtual
@@ -603,6 +607,10 @@ EXPORT_SYMBOL_GPL(usb_unlink_urb);
  * with error -EPERM.  Thus even if the URB's completion handler always
  * tries to resubmit, it will not succeed and the URB will become idle.
  *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
  * This routine may not be used in an interrupt context (such as a bottom
  * half or a completion handler), or when holding a spinlock, or in other
  * situations where the caller can't schedule().
@@ -640,6 +648,10 @@ EXPORT_SYMBOL_GPL(usb_kill_urb);
  * with error -EPERM.  Thus even if the URB's completion handler always
  * tries to resubmit, it will not succeed and the URB will become idle.
  *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
  * This routine may not be used in an interrupt context (such as a bottom
  * half or a completion handler), or when holding a spinlock, or in other
  * situations where the caller can't schedule().
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 8793f32bab11..e58b16442971 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -1574,7 +1574,6 @@ static void destroy_ep_files (struct dev_data *dev)
 	DBG (dev, "%s %d\n", __func__, dev->state);
 
 	/* dev->state must prevent interference */
-restart:
 	spin_lock_irq (&dev->lock);
 	while (!list_empty(&dev->epfiles)) {
 		struct ep_data	*ep;
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 057cdda7a489..806cc95317aa 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -347,6 +347,8 @@ static int ehci_reset (struct ehci_hcd *ehci)
 	if (ehci->debug)
 		dbgp_external_startup();
 
+	ehci->port_c_suspend = ehci->suspended_ports =
+			ehci->resuming_ports = 0;
 	return retval;
 }
 
@@ -939,6 +941,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
 			 * like usb_port_resume() does.
 			 */
 			ehci->reset_done[i] = jiffies + msecs_to_jiffies(25);
+			set_bit(i, &ehci->resuming_ports);
 			ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
 			mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
 		}
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 256fbd42e48c..38fe07623152 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -223,15 +223,10 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 	 * remote wakeup, we must fail the suspend.
 	 */
 	if (hcd->self.root_hub->do_remote_wakeup) {
-		port = HCS_N_PORTS(ehci->hcs_params);
-		while (port--) {
-			if (ehci->reset_done[port] != 0) {
-				spin_unlock_irq(&ehci->lock);
-				ehci_dbg(ehci, "suspend failed because "
-						"port %d is resuming\n",
-						port + 1);
-				return -EBUSY;
-			}
+		if (ehci->resuming_ports) {
+			spin_unlock_irq(&ehci->lock);
+			ehci_dbg(ehci, "suspend failed because a port is resuming\n");
+			return -EBUSY;
 		}
 	}
 
@@ -554,16 +549,12 @@ static int
 ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 {
 	struct ehci_hcd	*ehci = hcd_to_ehci (hcd);
-	u32		temp, status = 0;
+	u32		temp, status;
 	u32		mask;
 	int		ports, i, retval = 1;
 	unsigned long	flags;
 	u32		ppcd = 0;
 
-	/* if !USB_SUSPEND, root hub timers won't get shut down ... */
-	if (ehci->rh_state != EHCI_RH_RUNNING)
-		return 0;
-
 	/* init status to no-changes */
 	buf [0] = 0;
 	ports = HCS_N_PORTS (ehci->hcs_params);
@@ -572,6 +563,11 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 		retval++;
 	}
 
+	/* Inform the core about resumes-in-progress by returning
+	 * a non-zero value even if there are no status changes.
+	 */
+	status = ehci->resuming_ports;
+
 	/* Some boards (mostly VIA?) report bogus overcurrent indications,
 	 * causing massive log spam unless we completely ignore them.  It
 	 * may be relevant that VIA VT8235 controllers, where PORT_POWER is
@@ -846,6 +842,7 @@ static int ehci_hub_control (
 				ehci_writel(ehci,
 					temp & ~(PORT_RWC_BITS | PORT_RESUME),
 					status_reg);
+				clear_bit(wIndex, &ehci->resuming_ports);
 				retval = handshake(ehci, status_reg,
 					   PORT_RESUME, 0, 2000 /* 2msec */);
 				if (retval != 0) {
@@ -864,6 +861,7 @@ static int ehci_hub_control (
 					ehci->reset_done[wIndex])) {
 			status |= USB_PORT_STAT_C_RESET << 16;
 			ehci->reset_done [wIndex] = 0;
+			clear_bit(wIndex, &ehci->resuming_ports);
 
 			/* force reset to complete */
 			ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET),
@@ -884,8 +882,10 @@ static int ehci_hub_control (
 					ehci_readl(ehci, status_reg));
 		}
 
-		if (!(temp & (PORT_RESUME|PORT_RESET)))
+		if (!(temp & (PORT_RESUME|PORT_RESET))) {
 			ehci->reset_done[wIndex] = 0;
+			clear_bit(wIndex, &ehci->resuming_ports);
+		}
 
 		/* transfer dedicated ports to the companion hc */
 		if ((temp & PORT_CONNECT) &&
@@ -920,6 +920,7 @@ static int ehci_hub_control (
 			status |= USB_PORT_STAT_SUSPEND;
 		} else if (test_bit(wIndex, &ehci->suspended_ports)) {
 			clear_bit(wIndex, &ehci->suspended_ports);
+			clear_bit(wIndex, &ehci->resuming_ports);
 			ehci->reset_done[wIndex] = 0;
 			if (temp & PORT_PE)
 				set_bit(wIndex, &ehci->port_c_suspend);
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 3de48a2d7955..73544bd440bd 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -224,6 +224,7 @@ static int tegra_ehci_hub_control(
 		temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
 		/* start resume signalling */
 		ehci_writel(ehci, temp | PORT_RESUME, status_reg);
+		set_bit(wIndex-1, &ehci->resuming_ports);
 
 		spin_unlock_irqrestore(&ehci->lock, flags);
 		msleep(20);
@@ -236,6 +237,7 @@ static int tegra_ehci_hub_control(
 			pr_err("%s: timeout waiting for SUSPEND\n", __func__);
 
 		ehci->reset_done[wIndex-1] = 0;
+		clear_bit(wIndex-1, &ehci->resuming_ports);
 
 		tegra->port_resuming = 1;
 		goto done;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 8f9acbc96fde..2694ed6558d2 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -117,6 +117,8 @@ struct ehci_hcd {			/* one per controller */
 			the change-suspend feature turned on */
 	unsigned long		suspended_ports;	/* which ports are
 			suspended */
+	unsigned long		resuming_ports;		/* which ports have
+			started to resume */
 
 	/* per-HC memory pools (could be per-bus, but ...) */
 	struct dma_pool		*qh_pool;	/* qh per active urb */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 11de5f1be981..32dada8c8b4f 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -825,9 +825,13 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
 		}
 	}
 
-	/* Disable any BIOS SMIs */
-	writel(XHCI_LEGACY_DISABLE_SMI,
-			base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+	val = readl(base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+	/* Mask off (turn off) any enabled SMIs */
+	val &= XHCI_LEGACY_DISABLE_SMI;
+	/* Mask all SMI events bits, RW1C */
+	val |= XHCI_LEGACY_SMI_EVENTS;
+	/* Disable any BIOS SMIs and clear all SMI events*/
+	writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
 
 	if (usb_is_intel_switchable_xhci(pdev))
 		usb_enable_xhci_ports(pdev);
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index 045cde4cbc3d..768d54295a20 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -196,11 +196,12 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 	status = get_hub_status_data(uhci, buf);
 
 	switch (uhci->rh_state) {
-	    case UHCI_RH_SUSPENDING:
 	    case UHCI_RH_SUSPENDED:
 		/* if port change, ask to be resumed */
-		if (status || uhci->resuming_ports)
+		if (status || uhci->resuming_ports) {
+			status = 1;
 			usb_hcd_resume_root_hub(hcd);
+		}
 		break;
 
 	    case UHCI_RH_AUTO_STOPPED:
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index e9b0f043455d..4b436f5a4171 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -119,7 +119,7 @@ static void xhci_print_command_reg(struct xhci_hcd *xhci)
 	xhci_dbg(xhci, "  Event Interrupts %s\n",
 			(temp & CMD_EIE) ? "enabled " : "disabled");
 	xhci_dbg(xhci, "  Host System Error Interrupts %s\n",
-			(temp & CMD_EIE) ? "enabled " : "disabled");
+			(temp & CMD_HSEIE) ? "enabled " : "disabled");
 	xhci_dbg(xhci, "  HC has %sfinished light reset\n",
 			(temp & CMD_LRESET) ? "not " : "");
 }
diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h
index c7f33123d4c0..377f4242dabb 100644
--- a/drivers/usb/host/xhci-ext-caps.h
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -62,8 +62,9 @@
 /* USB Legacy Support Control and Status Register  - section 7.1.2 */
 /* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
 #define XHCI_LEGACY_CONTROL_OFFSET	(0x04)
-/* bits 1:2, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
-#define	XHCI_LEGACY_DISABLE_SMI		((0x3 << 1) + (0xff << 5) + (0x7 << 17))
+/* bits 1:3, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
+#define	XHCI_LEGACY_DISABLE_SMI		((0x7 << 1) + (0xff << 5) + (0x7 << 17))
+#define XHCI_LEGACY_SMI_EVENTS		(0x7 << 29)
 
 /* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */
 #define XHCI_L1C               (1 << 16)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index cae4c6f2845a..68eaa908ac8e 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1796,11 +1796,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	int i;
 
 	/* Free the Event Ring Segment Table and the actual Event Ring */
-	if (xhci->ir_set) {
-		xhci_writel(xhci, 0, &xhci->ir_set->erst_size);
-		xhci_write_64(xhci, 0, &xhci->ir_set->erst_base);
-		xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue);
-	}
 	size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
 	if (xhci->erst.entries)
 		dma_free_coherent(&pdev->dev, size,
@@ -1812,7 +1807,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	xhci->event_ring = NULL;
 	xhci_dbg(xhci, "Freed event ring\n");
 
-	xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring);
 	if (xhci->cmd_ring)
 		xhci_ring_free(xhci, xhci->cmd_ring);
 	xhci->cmd_ring = NULL;
@@ -1841,7 +1835,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	xhci->medium_streams_pool = NULL;
 	xhci_dbg(xhci, "Freed medium stream array pool\n");
 
-	xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr);
 	if (xhci->dcbaa)
 		dma_free_coherent(&pdev->dev, sizeof(*xhci->dcbaa),
 				xhci->dcbaa, xhci->dcbaa->dma);
@@ -2459,6 +2452,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 
 fail:
 	xhci_warn(xhci, "Couldn't initialize memory\n");
+	xhci_halt(xhci);
+	xhci_reset(xhci);
 	xhci_mem_cleanup(xhci);
 	return -ENOMEM;
 }
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index ef98b38626fb..7a856a767e77 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -95,6 +95,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		xhci->quirks |= XHCI_RESET_ON_RESUME;
 		xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
 	}
+	if (pdev->vendor == PCI_VENDOR_ID_VIA)
+		xhci->quirks |= XHCI_RESET_ON_RESUME;
 }
 
 /* called during probe() after chip reset completes */
@@ -326,7 +328,7 @@ int __init xhci_register_pci(void)
 	return pci_register_driver(&xhci_pci_driver);
 }
 
-void __exit xhci_unregister_pci(void)
+void xhci_unregister_pci(void)
 {
 	pci_unregister_driver(&xhci_pci_driver);
 }
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 6bd9d53062eb..3d9422f16a20 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2417,7 +2417,7 @@ hw_died:
 		u32 irq_pending;
 		/* Acknowledge the PCI interrupt */
 		irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
-		irq_pending |= 0x3;
+		irq_pending |= IMAN_IP;
 		xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending);
 	}
 
@@ -2734,7 +2734,7 @@ int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 				urb->dev->speed == USB_SPEED_FULL)
 			urb->interval /= 8;
 	}
-	return xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index);
+	return xhci_queue_bulk_tx(xhci, mem_flags, urb, slot_id, ep_index);
 }
 
 /*
@@ -3514,7 +3514,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
 	}
 	ep_ring->num_trbs_free_temp = ep_ring->num_trbs_free;
 
-	return xhci_queue_isoc_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index);
+	return xhci_queue_isoc_tx(xhci, mem_flags, urb, slot_id, ep_index);
 }
 
 /****		Command Ring Operations		****/
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index e1963d4a430f..36641a7f2371 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -106,6 +106,9 @@ int xhci_halt(struct xhci_hcd *xhci)
 			STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
 	if (!ret)
 		xhci->xhc_state |= XHCI_STATE_HALTED;
+	else
+		xhci_warn(xhci, "Host not halted after %u microseconds.\n",
+				XHCI_MAX_HALT_USEC);
 	return ret;
 }
 
@@ -664,11 +667,11 @@ static void xhci_save_registers(struct xhci_hcd *xhci)
 	xhci->s3.dev_nt = xhci_readl(xhci, &xhci->op_regs->dev_notification);
 	xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
 	xhci->s3.config_reg = xhci_readl(xhci, &xhci->op_regs->config_reg);
-	xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
-	xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control);
 	xhci->s3.erst_size = xhci_readl(xhci, &xhci->ir_set->erst_size);
 	xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base);
 	xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+	xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+	xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control);
 }
 
 static void xhci_restore_registers(struct xhci_hcd *xhci)
@@ -677,10 +680,11 @@ static void xhci_restore_registers(struct xhci_hcd *xhci)
 	xhci_writel(xhci, xhci->s3.dev_nt, &xhci->op_regs->dev_notification);
 	xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr);
 	xhci_writel(xhci, xhci->s3.config_reg, &xhci->op_regs->config_reg);
-	xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending);
-	xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control);
 	xhci_writel(xhci, xhci->s3.erst_size, &xhci->ir_set->erst_size);
 	xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base);
+	xhci_write_64(xhci, xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue);
+	xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending);
+	xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control);
 }
 
 static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci)
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 91074fdab3eb..3d69c4b2b542 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -205,6 +205,10 @@ struct xhci_op_regs {
 #define CMD_PM_INDEX	(1 << 11)
 /* bits 12:31 are reserved (and should be preserved on writes). */
 
+/* IMAN - Interrupt Management Register */
+#define IMAN_IP		(1 << 1)
+#define IMAN_IE		(1 << 0)
+
 /* USBSTS - USB status - status bitmasks */
 /* HC not running - set to 1 when run/stop bit is cleared. */
 #define STS_HALT	XHCI_STS_HALT
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index 7f547dc3a590..ed8adb052ca7 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -60,8 +60,6 @@ static int usb_serial_device_probe(struct device *dev)
 		retval = -ENODEV;
 		goto exit;
 	}
-	if (port->dev_state != PORT_REGISTERING)
-		goto exit;
 
 	driver = port->serial->type;
 	if (driver->port_probe) {
@@ -98,9 +96,6 @@ static int usb_serial_device_remove(struct device *dev)
 	if (!port)
 		return -ENODEV;
 
-	if (port->dev_state != PORT_UNREGISTERING)
-		return retval;
-
 	device_remove_file(&port->dev, &dev_attr_port_number);
 
 	driver = port->serial->type;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index ff8605b4b4be..02e7f2d32d52 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -75,7 +75,8 @@ struct ftdi_private {
 	unsigned long last_dtr_rts;	/* saved modem control outputs */
 	struct async_icount	icount;
 	wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
-	char prev_status, diff_status;        /* Used for TIOCMIWAIT */
+	char prev_status;        /* Used for TIOCMIWAIT */
+	bool dev_gone;        /* Used to abort TIOCMIWAIT */
 	char transmit_empty;	/* If transmitter is empty or not */
 	struct usb_serial_port *port;
 	__u16 interface;	/* FT2232C, FT2232H or FT4232H port interface
@@ -1681,6 +1682,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 	init_waitqueue_head(&priv->delta_msr_wait);
 
 	priv->flags = ASYNC_LOW_LATENCY;
+	priv->dev_gone = false;
 
 	if (quirk && quirk->port_probe)
 		quirk->port_probe(priv);
@@ -1839,6 +1841,9 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
 
 	dbg("%s", __func__);
 
+	priv->dev_gone = true;
+	wake_up_interruptible_all(&priv->delta_msr_wait);
+
 	remove_sysfs_attrs(port);
 
 	kref_put(&priv->kref, ftdi_sio_priv_release);
@@ -1982,17 +1987,19 @@ static int ftdi_process_packet(struct tty_struct *tty,
 	   N.B. packet may be processed more than once, but differences
 	   are only processed once.  */
 	status = packet[0] & FTDI_STATUS_B0_MASK;
-	if (status & FTDI_RS0_CTS)
-		priv->icount.cts++;
-	if (status & FTDI_RS0_DSR)
-		priv->icount.dsr++;
-	if (status & FTDI_RS0_RI)
-		priv->icount.rng++;
-	if (status & FTDI_RS0_RLSD)
-		priv->icount.dcd++;
 	if (status != priv->prev_status) {
-		priv->diff_status |= status ^ priv->prev_status;
-		wake_up_interruptible(&priv->delta_msr_wait);
+		char diff_status = status ^ priv->prev_status;
+
+		if (diff_status & FTDI_RS0_CTS)
+			priv->icount.cts++;
+		if (diff_status & FTDI_RS0_DSR)
+			priv->icount.dsr++;
+		if (diff_status & FTDI_RS0_RI)
+			priv->icount.rng++;
+		if (diff_status & FTDI_RS0_RLSD)
+			priv->icount.dcd++;
+
+		wake_up_interruptible_all(&priv->delta_msr_wait);
 		priv->prev_status = status;
 	}
 
@@ -2395,15 +2402,12 @@ static int ftdi_ioctl(struct tty_struct *tty,
 	 */
 	case TIOCMIWAIT:
 		cprev = priv->icount;
-		while (1) {
+		while (!priv->dev_gone) {
 			interruptible_sleep_on(&priv->delta_msr_wait);
 			/* see if a signal did it */
 			if (signal_pending(current))
 				return -ERESTARTSYS;
 			cnow = priv->icount;
-			if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
-			    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
-				return -EIO; /* no change => error */
 			if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
 			    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
 			    ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
@@ -2412,7 +2416,7 @@ static int ftdi_ioctl(struct tty_struct *tty,
 			}
 			cprev = cnow;
 		}
-		/* not reached */
+		return -EIO;
 		break;
 	case TIOCSERGETLSR:
 		return get_lsr_info(port, (struct serial_struct __user *)arg);
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
index 6e1622f2a297..08d16e8c002d 100644
--- a/drivers/usb/serial/metro-usb.c
+++ b/drivers/usb/serial/metro-usb.c
@@ -27,8 +27,8 @@
 
 /* Product information. */
 #define FOCUS_VENDOR_ID			0x0C2E
-#define FOCUS_PRODUCT_ID		0x0720
-#define FOCUS_PRODUCT_ID_UNI		0x0710
+#define FOCUS_PRODUCT_ID_BI		0x0720
+#define FOCUS_PRODUCT_ID_UNI		0x0700
 
 #define METROUSB_SET_REQUEST_TYPE	0x40
 #define METROUSB_SET_MODEM_CTRL_REQUEST	10
@@ -47,7 +47,7 @@ struct metrousb_private {
 
 /* Device table list. */
 static struct usb_device_id id_table[] = {
-	{ USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID) },
+	{ USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_BI) },
 	{ USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_UNI) },
 	{ }, /* Terminating entry. */
 };
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 836cfa9a515f..f4465ccddc35 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -708,6 +708,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED) },
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED3) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED4) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED5) },
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index ff4a174fa5de..a1a9062954c4 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -420,7 +420,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	control = priv->line_control;
 	if ((cflag & CBAUD) == B0)
 		priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
-	else
+	else if ((old_termios->c_cflag & CBAUD) == B0)
 		priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
 	if (control != priv->line_control) {
 		control = priv->line_control;
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index f14465a83dd1..fdd5aa2c8d82 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -289,6 +289,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1199, 0x6856) },	/* Sierra Wireless AirCard 881 U */
 	{ USB_DEVICE(0x1199, 0x6859) },	/* Sierra Wireless AirCard 885 E */
 	{ USB_DEVICE(0x1199, 0x685A) },	/* Sierra Wireless AirCard 885 E */
+	{ USB_DEVICE(0x1199, 0x68A2) }, /* Sierra Wireless MC7710 */
 	/* Sierra Wireless C885 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)},
 	/* Sierra Wireless C888, Air Card 501, USB 303, USB 304 */
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 69230f01056a..97355a15bbea 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1059,6 +1059,12 @@ int usb_serial_probe(struct usb_interface *interface,
 		serial->attached = 1;
 	}
 
+	/* Avoid race with tty_open and serial_install by setting the
+	 * disconnected flag and not clearing it until all ports have been
+	 * registered.
+	 */
+	serial->disconnected = 1;
+
 	if (get_free_serial(serial, num_ports, &minor) == NULL) {
 		dev_err(&interface->dev, "No more free serial devices\n");
 		goto probe_error;
@@ -1070,19 +1076,16 @@ int usb_serial_probe(struct usb_interface *interface,
 		port = serial->port[i];
 		dev_set_name(&port->dev, "ttyUSB%d", port->number);
 		dbg ("%s - registering %s", __func__, dev_name(&port->dev));
-		port->dev_state = PORT_REGISTERING;
 		device_enable_async_suspend(&port->dev);
 
 		retval = device_add(&port->dev);
-		if (retval) {
+		if (retval)
 			dev_err(&port->dev, "Error registering port device, "
 				"continuing\n");
-			port->dev_state = PORT_UNREGISTERED;
-		} else {
-			port->dev_state = PORT_REGISTERED;
-		}
 	}
 
+	serial->disconnected = 0;
+
 	usb_serial_console_init(debug, minor);
 
 exit:
@@ -1124,22 +1127,8 @@ void usb_serial_disconnect(struct usb_interface *interface)
 			}
 			kill_traffic(port);
 			cancel_work_sync(&port->work);
-			if (port->dev_state == PORT_REGISTERED) {
-
-				/* Make sure the port is bound so that the
-				 * driver's port_remove method is called.
-				 */
-				if (!port->dev.driver) {
-					int rc;
-
-					port->dev.driver =
-							&serial->type->driver;
-					rc = device_bind_driver(&port->dev);
-				}
-				port->dev_state = PORT_UNREGISTERING;
+			if (device_is_registered(&port->dev))
 				device_del(&port->dev);
-				port->dev_state = PORT_UNREGISTERED;
-			}
 		}
 	}
 	serial->type->disconnect(serial);
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index c18538e4a6db..2653e73db623 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -132,6 +132,35 @@ static struct us_unusual_dev for_dynamic_ids =
 #undef COMPLIANT_DEV
 #undef USUAL_DEV
 
+#ifdef CONFIG_LOCKDEP
+
+static struct lock_class_key us_interface_key[USB_MAXINTERFACES];
+
+static void us_set_lock_class(struct mutex *mutex,
+		struct usb_interface *intf)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct usb_host_config *config = udev->actconfig;
+	int i;
+
+	for (i = 0; i < config->desc.bNumInterfaces; i++) {
+		if (config->interface[i] == intf)
+			break;
+	}
+
+	BUG_ON(i == config->desc.bNumInterfaces);
+
+	lockdep_set_class(mutex, &us_interface_key[i]);
+}
+
+#else
+
+static void us_set_lock_class(struct mutex *mutex,
+		struct usb_interface *intf)
+{
+}
+
+#endif
 
 #ifdef CONFIG_PM	/* Minimal support for suspend and resume */
 
@@ -895,6 +924,7 @@ int usb_stor_probe1(struct us_data **pus,
 	*pus = us = host_to_us(host);
 	memset(us, 0, sizeof(struct us_data));
 	mutex_init(&(us->dev_mutex));
+	us_set_lock_class(&us->dev_mutex, intf);
 	init_completion(&us->cmnd_ready);
 	init_completion(&(us->notify));
 	init_waitqueue_head(&us->delay_wait);
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index fbb666b1b670..474283888233 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -28,13 +28,6 @@
 /* parity check flag */
 #define RELEVANT_IFLAG(iflag)	(iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
 
-enum port_dev_state {
-	PORT_UNREGISTERED,
-	PORT_REGISTERING,
-	PORT_REGISTERED,
-	PORT_UNREGISTERING,
-};
-
 /* USB serial flags */
 #define USB_SERIAL_WRITE_BUSY	0
 
@@ -124,7 +117,6 @@ struct usb_serial_port {
 	char			throttle_req;
 	unsigned long		sysrq; /* sysrq timeout */
 	struct device		dev;
-	enum port_dev_state	dev_state;
 };
 #define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev)