diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c
index 2ca3a1f30ebf..f441130407e7 100644
--- a/drivers/pci/host/pci-dra7xx.c
+++ b/drivers/pci/host/pci-dra7xx.c
@@ -142,13 +142,13 @@ static void dra7xx_pcie_enable_interrupts(struct pcie_port *pp)
 
 static void dra7xx_pcie_host_init(struct pcie_port *pp)
 {
-	dw_pcie_setup_rc(pp);
-
 	pp->io_base &= DRA7XX_CPU_TO_BUS_ADDR;
 	pp->mem_base &= DRA7XX_CPU_TO_BUS_ADDR;
 	pp->cfg0_base &= DRA7XX_CPU_TO_BUS_ADDR;
 	pp->cfg1_base &= DRA7XX_CPU_TO_BUS_ADDR;
 
+	dw_pcie_setup_rc(pp);
+
 	dra7xx_pcie_establish_link(pp);
 	if (IS_ENABLED(CONFIG_PCI_MSI))
 		dw_pcie_msi_init(pp);
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index a4cccd356304..261e4a1106df 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -434,7 +434,6 @@ int dw_pcie_host_init(struct pcie_port *pp)
 	struct platform_device *pdev = to_platform_device(pp->dev);
 	struct pci_bus *bus, *child;
 	struct resource *cfg_res;
-	u32 val;
 	int i, ret;
 	LIST_HEAD(res);
 	struct resource_entry *win;
@@ -544,25 +543,6 @@ int dw_pcie_host_init(struct pcie_port *pp)
 	if (pp->ops->host_init)
 		pp->ops->host_init(pp);
 
-	/*
-	 * If the platform provides ->rd_other_conf, it means the platform
-	 * uses its own address translation component rather than ATU, so
-	 * we should not program the ATU here.
-	 */
-	if (!pp->ops->rd_other_conf)
-		dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX1,
-					  PCIE_ATU_TYPE_MEM, pp->mem_base,
-					  pp->mem_bus_addr, pp->mem_size);
-
-	dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0);
-
-	/* program correct class for RC */
-	dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI);
-
-	dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val);
-	val |= PORT_LOGIC_SPEED_CHANGE;
-	dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val);
-
 	pp->root_bus_nr = pp->busn->start;
 	if (IS_ENABLED(CONFIG_PCI_MSI)) {
 		bus = pci_scan_root_bus_msi(pp->dev, pp->root_bus_nr,
@@ -800,6 +780,25 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
 	val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
 		PCI_COMMAND_MASTER | PCI_COMMAND_SERR;
 	dw_pcie_writel_rc(pp, val, PCI_COMMAND);
+
+	/*
+	 * If the platform provides ->rd_other_conf, it means the platform
+	 * uses its own address translation component rather than ATU, so
+	 * we should not program the ATU here.
+	 */
+	if (!pp->ops->rd_other_conf)
+		dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX1,
+					  PCIE_ATU_TYPE_MEM, pp->mem_base,
+					  pp->mem_bus_addr, pp->mem_size);
+
+	dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0);
+
+	/* program correct class for RC */
+	dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI);
+
+	dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val);
+	val |= PORT_LOGIC_SPEED_CHANGE;
+	dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val);
 }
 
 MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");