powerpc/85xx: Rework P2020DS device tree
Utilize new split between board & SoC, and new SoC device trees split into pre & post utilizing 'template' includes for SoC IP blocks. Other changes include: * Moved to specifying interrupt-parent for mpic at root * Moved to 4-cell mpic interrupt cells to support MPIC timers * Reworked PCIe nodes to allow supportin IRQs for controller (errors) and moved PCI device IRQs down to virtual bridge level * Updated spi node to new espi binding specification * Renamed 'sdhci' node to 'sdhc' * Changed GPIO compatiable from 'fsl,mpc8572-gpio' to 'fsl,pq3-gpio' as the 'mpc8572' compatiable is to deal with a 'mpc8572' specific to an erratum * Fixed wrong reg offsets for mdio nodes associated with etsec2 & etsec3 * Dropping "fsl,p2020-IP..." from compatibles for standard blocks Signed-off-by: Kumar Gala <galak@kernel.crashing.org>wifi-calibration
Kumar Gala
parent
b0e2f248b4
commit
7f9ce7143e
|
|
@ -0,0 +1,194 @@
|
|||
/*
|
||||
* P2020/P2010 Silicon/SoC Device Tree Source (post include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&lbc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
|
||||
interrupts = <19 2 0 0>;
|
||||
};
|
||||
|
||||
/* controller at 0xa000 */
|
||||
&pci0 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <26 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <26 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0x9000 */
|
||||
&pci1 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <25 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <25 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0x8000 */
|
||||
&pci2 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <24 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <24 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "fsl,p2020-immr", "simple-bus";
|
||||
bus-frequency = <0>; // Filled out by uboot.
|
||||
|
||||
ecm-law@0 {
|
||||
compatible = "fsl,ecm-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <12>;
|
||||
};
|
||||
|
||||
ecm@1000 {
|
||||
compatible = "fsl,p2020-ecm", "fsl,ecm";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <17 2 0 0>;
|
||||
};
|
||||
|
||||
memory-controller@2000 {
|
||||
compatible = "fsl,p2020-memory-controller";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupts = <18 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-i2c-0.dtsi"
|
||||
/include/ "pq3-i2c-1.dtsi"
|
||||
/include/ "pq3-duart-0.dtsi"
|
||||
/include/ "pq3-espi-0.dtsi"
|
||||
spi0: spi@7000 {
|
||||
fsl,espi-num-chipselects = <4>;
|
||||
};
|
||||
|
||||
/include/ "pq3-dma-1.dtsi"
|
||||
/include/ "pq3-gpio-0.dtsi"
|
||||
|
||||
L2: l2-cache-controller@20000 {
|
||||
compatible = "fsl,p2020-l2-cache-controller";
|
||||
reg = <0x20000 0x1000>;
|
||||
cache-line-size = <32>; // 32 bytes
|
||||
cache-size = <0x80000>; // L2,512K
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-dma-0.dtsi"
|
||||
/include/ "pq3-usb2-dr-0.dtsi"
|
||||
/include/ "pq3-etsec1-0.dtsi"
|
||||
/include/ "pq3-etsec1-timer-0.dtsi"
|
||||
|
||||
ptp_clock@24e00 {
|
||||
interrupts = <68 2 0 0 69 2 0 0 70 2 0 0>;
|
||||
};
|
||||
|
||||
|
||||
/include/ "pq3-etsec1-1.dtsi"
|
||||
/include/ "pq3-etsec1-2.dtsi"
|
||||
/include/ "pq3-esdhc-0.dtsi"
|
||||
/include/ "pq3-sec3.1-0.dtsi"
|
||||
/include/ "pq3-mpic.dtsi"
|
||||
/include/ "pq3-mpic-timer-B.dtsi"
|
||||
|
||||
global-utilities@e0000 {
|
||||
compatible = "fsl,p2020-guts";
|
||||
reg = <0xe0000 0x1000>;
|
||||
fsl,has-rstcr;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,69 @@
|
|||
/*
|
||||
* P2020/P2010 Silicon/SoC Device Tree Source (pre include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
compatible = "fsl,P2020";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
ethernet0 = &enet0;
|
||||
ethernet1 = &enet1;
|
||||
ethernet2 = &enet2;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
pci2 = &pci2;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,P2020@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0x0>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
|
||||
PowerPC,P2020@1 {
|
||||
device_type = "cpu";
|
||||
reg = <0x1>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -9,30 +9,17 @@
|
|||
* option) any later version.
|
||||
*/
|
||||
|
||||
/include/ "p2020si.dtsi"
|
||||
/include/ "fsl/p2020si-pre.dtsi"
|
||||
|
||||
/ {
|
||||
model = "fsl,P2020DS";
|
||||
compatible = "fsl,P2020DS";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &enet0;
|
||||
ethernet1 = &enet1;
|
||||
ethernet2 = &enet2;
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
pci2 = &pci2;
|
||||
};
|
||||
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
localbus@ffe05000 {
|
||||
compatible = "fsl,elbc", "simple-bus";
|
||||
board_lbc: lbc: localbus@ffe05000 {
|
||||
ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
|
||||
0x1 0x0 0x0 0xe0000000 0x08000000
|
||||
0x2 0x0 0x0 0xffa00000 0x00040000
|
||||
|
|
@ -40,203 +27,18 @@
|
|||
0x4 0x0 0x0 0xffa40000 0x00040000
|
||||
0x5 0x0 0x0 0xffa80000 0x00040000
|
||||
0x6 0x0 0x0 0xffac0000 0x00040000>;
|
||||
|
||||
nor@0,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "cfi-flash";
|
||||
reg = <0x0 0x0 0x8000000>;
|
||||
bank-width = <2>;
|
||||
device-width = <1>;
|
||||
|
||||
ramdisk@0 {
|
||||
reg = <0x0 0x03000000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
diagnostic@3000000 {
|
||||
reg = <0x03000000 0x00e00000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
dink@3e00000 {
|
||||
reg = <0x03e00000 0x00200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
kernel@4000000 {
|
||||
reg = <0x04000000 0x00400000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
jffs2@4400000 {
|
||||
reg = <0x04400000 0x03b00000>;
|
||||
};
|
||||
|
||||
dtb@7f00000 {
|
||||
reg = <0x07f00000 0x00080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
u-boot@7f80000 {
|
||||
reg = <0x07f80000 0x00080000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
|
||||
nand@2,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,elbc-fcm-nand";
|
||||
reg = <0x2 0x0 0x40000>;
|
||||
|
||||
u-boot@0 {
|
||||
reg = <0x0 0x02000000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
jffs2@2000000 {
|
||||
reg = <0x02000000 0x10000000>;
|
||||
};
|
||||
|
||||
ramdisk@12000000 {
|
||||
reg = <0x12000000 0x08000000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
kernel@1a000000 {
|
||||
reg = <0x1a000000 0x04000000>;
|
||||
};
|
||||
|
||||
dtb@1e000000 {
|
||||
reg = <0x1e000000 0x01000000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
empty@1f000000 {
|
||||
reg = <0x1f000000 0x21000000>;
|
||||
};
|
||||
};
|
||||
|
||||
board-control@3,0 {
|
||||
compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis";
|
||||
reg = <0x3 0x0 0x30>;
|
||||
};
|
||||
|
||||
nand@4,0 {
|
||||
compatible = "fsl,elbc-fcm-nand";
|
||||
reg = <0x4 0x0 0x40000>;
|
||||
};
|
||||
|
||||
nand@5,0 {
|
||||
compatible = "fsl,elbc-fcm-nand";
|
||||
reg = <0x5 0x0 0x40000>;
|
||||
};
|
||||
|
||||
nand@6,0 {
|
||||
compatible = "fsl,elbc-fcm-nand";
|
||||
reg = <0x6 0x0 0x40000>;
|
||||
};
|
||||
reg = <0 0xffe05000 0 0x1000>;
|
||||
};
|
||||
|
||||
soc@ffe00000 {
|
||||
|
||||
usb@22000 {
|
||||
phy_type = "ulpi";
|
||||
};
|
||||
|
||||
mdio@24520 {
|
||||
phy0: ethernet-phy@0 {
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <3 1>;
|
||||
reg = <0x0>;
|
||||
};
|
||||
phy1: ethernet-phy@1 {
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <3 1>;
|
||||
reg = <0x1>;
|
||||
};
|
||||
phy2: ethernet-phy@2 {
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <3 1>;
|
||||
reg = <0x2>;
|
||||
};
|
||||
tbi0: tbi-phy@11 {
|
||||
reg = <0x11>;
|
||||
device_type = "tbi-phy";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
mdio@25520 {
|
||||
tbi1: tbi-phy@11 {
|
||||
reg = <0x11>;
|
||||
device_type = "tbi-phy";
|
||||
};
|
||||
};
|
||||
|
||||
mdio@26520 {
|
||||
tbi2: tbi-phy@11 {
|
||||
reg = <0x11>;
|
||||
device_type = "tbi-phy";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
ptp_clock@24E00 {
|
||||
compatible = "fsl,etsec-ptp";
|
||||
reg = <0x24E00 0xB0>;
|
||||
interrupts = <68 2 69 2 70 2>;
|
||||
interrupt-parent = < &mpic >;
|
||||
fsl,tclk-period = <5>;
|
||||
fsl,tmr-prsc = <200>;
|
||||
fsl,tmr-add = <0xCCCCCCCD>;
|
||||
fsl,tmr-fiper1 = <0x3B9AC9FB>;
|
||||
fsl,tmr-fiper2 = <0x0001869B>;
|
||||
fsl,max-adj = <249999999>;
|
||||
};
|
||||
|
||||
enet0: ethernet@24000 {
|
||||
tbi-handle = <&tbi0>;
|
||||
phy-handle = <&phy0>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
};
|
||||
|
||||
enet1: ethernet@25000 {
|
||||
tbi-handle = <&tbi1>;
|
||||
phy-handle = <&phy1>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
|
||||
};
|
||||
|
||||
enet2: ethernet@26000 {
|
||||
tbi-handle = <&tbi2>;
|
||||
phy-handle = <&phy2>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
};
|
||||
|
||||
|
||||
msi@41600 {
|
||||
compatible = "fsl,mpic-msi";
|
||||
};
|
||||
board_soc: soc: soc@ffe00000 {
|
||||
ranges = <0x0 0x0 0xffe00000 0x100000>;
|
||||
};
|
||||
|
||||
pci0: pcie@ffe08000 {
|
||||
pci2: pcie@ffe08000 {
|
||||
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
|
||||
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x8 0x1
|
||||
0000 0x0 0x0 0x2 &mpic 0x9 0x1
|
||||
0000 0x0 0x0 0x3 &mpic 0xa 0x1
|
||||
0000 0x0 0x0 0x4 &mpic 0xb 0x1
|
||||
>;
|
||||
reg = <0 0xffe08000 0 0x1000>;
|
||||
pcie@0 {
|
||||
reg = <0x0 0x0 0x0 0x0 0x0>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
ranges = <0x2000000 0x0 0x80000000
|
||||
0x2000000 0x0 0x80000000
|
||||
0x0 0x20000000
|
||||
|
|
@ -247,61 +49,11 @@
|
|||
};
|
||||
};
|
||||
|
||||
pci1: pcie@ffe09000 {
|
||||
board_pci1: pci1: pcie@ffe09000 {
|
||||
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
|
||||
interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
|
||||
interrupt-map = <
|
||||
|
||||
// IDSEL 0x11 func 0 - PCI slot 1
|
||||
0x8800 0x0 0x0 0x1 &i8259 0x9 0x2
|
||||
0x8800 0x0 0x0 0x2 &i8259 0xa 0x2
|
||||
|
||||
// IDSEL 0x11 func 1 - PCI slot 1
|
||||
0x8900 0x0 0x0 0x1 &i8259 0x9 0x2
|
||||
0x8900 0x0 0x0 0x2 &i8259 0xa 0x2
|
||||
|
||||
// IDSEL 0x11 func 2 - PCI slot 1
|
||||
0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2
|
||||
0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2
|
||||
|
||||
// IDSEL 0x11 func 3 - PCI slot 1
|
||||
0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2
|
||||
0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2
|
||||
|
||||
// IDSEL 0x11 func 4 - PCI slot 1
|
||||
0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2
|
||||
0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2
|
||||
|
||||
// IDSEL 0x11 func 5 - PCI slot 1
|
||||
0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2
|
||||
0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2
|
||||
|
||||
// IDSEL 0x11 func 6 - PCI slot 1
|
||||
0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2
|
||||
0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2
|
||||
|
||||
// IDSEL 0x11 func 7 - PCI slot 1
|
||||
0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2
|
||||
0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2
|
||||
|
||||
// IDSEL 0x1d Audio
|
||||
0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
|
||||
|
||||
// IDSEL 0x1e Legacy
|
||||
0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
|
||||
0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
|
||||
|
||||
// IDSEL 0x1f IDE/SATA
|
||||
0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
|
||||
0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
|
||||
>;
|
||||
|
||||
reg = <0 0xffe09000 0 0x1000>;
|
||||
pcie@0 {
|
||||
reg = <0x0 0x0 0x0 0x0 0x0>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
ranges = <0x2000000 0x0 0xa0000000
|
||||
0x2000000 0x0 0xa0000000
|
||||
0x0 0x20000000
|
||||
|
|
@ -309,89 +61,14 @@
|
|||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x10000>;
|
||||
uli1575@0 {
|
||||
reg = <0x0 0x0 0x0 0x0 0x0>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
ranges = <0x2000000 0x0 0xa0000000
|
||||
0x2000000 0x0 0xa0000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x10000>;
|
||||
isa@1e {
|
||||
device_type = "isa";
|
||||
#interrupt-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
#address-cells = <2>;
|
||||
reg = <0xf000 0x0 0x0 0x0 0x0>;
|
||||
ranges = <0x1 0x0 0x1000000 0x0 0x0
|
||||
0x1000>;
|
||||
interrupt-parent = <&i8259>;
|
||||
|
||||
i8259: interrupt-controller@20 {
|
||||
reg = <0x1 0x20 0x2
|
||||
0x1 0xa0 0x2
|
||||
0x1 0x4d0 0x2>;
|
||||
interrupt-controller;
|
||||
device_type = "interrupt-controller";
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
compatible = "chrp,iic";
|
||||
interrupts = <4 1>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
i8042@60 {
|
||||
#size-cells = <0>;
|
||||
#address-cells = <1>;
|
||||
reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
|
||||
interrupts = <1 3 12 3>;
|
||||
interrupt-parent =
|
||||
<&i8259>;
|
||||
|
||||
keyboard@0 {
|
||||
reg = <0x0>;
|
||||
compatible = "pnpPNP,303";
|
||||
};
|
||||
|
||||
mouse@1 {
|
||||
reg = <0x1>;
|
||||
compatible = "pnpPNP,f03";
|
||||
};
|
||||
};
|
||||
|
||||
rtc@70 {
|
||||
compatible = "pnpPNP,b00";
|
||||
reg = <0x1 0x70 0x2>;
|
||||
};
|
||||
|
||||
gpio@400 {
|
||||
reg = <0x1 0x400 0x80>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
pci2: pcie@ffe0a000 {
|
||||
pci0: pcie@ffe0a000 {
|
||||
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
|
||||
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x0 0x1
|
||||
0000 0x0 0x0 0x2 &mpic 0x1 0x1
|
||||
0000 0x0 0x0 0x3 &mpic 0x2 0x1
|
||||
0000 0x0 0x0 0x4 &mpic 0x3 0x1
|
||||
>;
|
||||
reg = <0 0xffe0a000 0 0x1000>;
|
||||
pcie@0 {
|
||||
reg = <0x0 0x0 0x0 0x0 0x0>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
ranges = <0x2000000 0x0 0xc0000000
|
||||
0x2000000 0x0 0xc0000000
|
||||
0x0 0x20000000
|
||||
|
|
@ -402,3 +79,11 @@
|
|||
};
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* p2020ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
|
||||
* for interrupt-map & interrupt-map-mask
|
||||
*/
|
||||
|
||||
/include/ "fsl/p2020si-post.dtsi"
|
||||
/include/ "p2020ds.dtsi"
|
||||
|
|
|
|||
|
|
@ -0,0 +1,316 @@
|
|||
/*
|
||||
* P2020DS Device Tree Source stub (no addresses or top-level ranges)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&board_lbc {
|
||||
nor@0,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "cfi-flash";
|
||||
reg = <0x0 0x0 0x8000000>;
|
||||
bank-width = <2>;
|
||||
device-width = <1>;
|
||||
|
||||
ramdisk@0 {
|
||||
reg = <0x0 0x03000000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
diagnostic@3000000 {
|
||||
reg = <0x03000000 0x00e00000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
dink@3e00000 {
|
||||
reg = <0x03e00000 0x00200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
kernel@4000000 {
|
||||
reg = <0x04000000 0x00400000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
jffs2@4400000 {
|
||||
reg = <0x04400000 0x03b00000>;
|
||||
};
|
||||
|
||||
dtb@7f00000 {
|
||||
reg = <0x07f00000 0x00080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
u-boot@7f80000 {
|
||||
reg = <0x07f80000 0x00080000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
|
||||
nand@2,0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,elbc-fcm-nand";
|
||||
reg = <0x2 0x0 0x40000>;
|
||||
|
||||
u-boot@0 {
|
||||
reg = <0x0 0x02000000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
jffs2@2000000 {
|
||||
reg = <0x02000000 0x10000000>;
|
||||
};
|
||||
|
||||
ramdisk@12000000 {
|
||||
reg = <0x12000000 0x08000000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
kernel@1a000000 {
|
||||
reg = <0x1a000000 0x04000000>;
|
||||
};
|
||||
|
||||
dtb@1e000000 {
|
||||
reg = <0x1e000000 0x01000000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
empty@1f000000 {
|
||||
reg = <0x1f000000 0x21000000>;
|
||||
};
|
||||
};
|
||||
|
||||
board-control@3,0 {
|
||||
compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis";
|
||||
reg = <0x3 0x0 0x30>;
|
||||
};
|
||||
|
||||
nand@4,0 {
|
||||
compatible = "fsl,elbc-fcm-nand";
|
||||
reg = <0x4 0x0 0x40000>;
|
||||
};
|
||||
|
||||
nand@5,0 {
|
||||
compatible = "fsl,elbc-fcm-nand";
|
||||
reg = <0x5 0x0 0x40000>;
|
||||
};
|
||||
|
||||
nand@6,0 {
|
||||
compatible = "fsl,elbc-fcm-nand";
|
||||
reg = <0x6 0x0 0x40000>;
|
||||
};
|
||||
};
|
||||
|
||||
&board_soc {
|
||||
usb@22000 {
|
||||
phy_type = "ulpi";
|
||||
};
|
||||
|
||||
mdio@24520 {
|
||||
phy0: ethernet-phy@0 {
|
||||
interrupts = <3 1 0 0>;
|
||||
reg = <0x0>;
|
||||
};
|
||||
phy1: ethernet-phy@1 {
|
||||
interrupts = <3 1 0 0>;
|
||||
reg = <0x1>;
|
||||
};
|
||||
phy2: ethernet-phy@2 {
|
||||
interrupts = <3 1 0 0>;
|
||||
reg = <0x2>;
|
||||
};
|
||||
tbi0: tbi-phy@11 {
|
||||
reg = <0x11>;
|
||||
device_type = "tbi-phy";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
mdio@25520 {
|
||||
tbi1: tbi-phy@11 {
|
||||
reg = <0x11>;
|
||||
device_type = "tbi-phy";
|
||||
};
|
||||
};
|
||||
|
||||
mdio@26520 {
|
||||
tbi2: tbi-phy@11 {
|
||||
reg = <0x11>;
|
||||
device_type = "tbi-phy";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
ptp_clock@24e00 {
|
||||
fsl,tclk-period = <5>;
|
||||
fsl,tmr-prsc = <200>;
|
||||
fsl,tmr-add = <0xCCCCCCCD>;
|
||||
fsl,tmr-fiper1 = <0x3B9AC9FB>;
|
||||
fsl,tmr-fiper2 = <0x0001869B>;
|
||||
fsl,max-adj = <249999999>;
|
||||
};
|
||||
|
||||
enet0: ethernet@24000 {
|
||||
tbi-handle = <&tbi0>;
|
||||
phy-handle = <&phy0>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
};
|
||||
|
||||
enet1: ethernet@25000 {
|
||||
tbi-handle = <&tbi1>;
|
||||
phy-handle = <&phy1>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
|
||||
};
|
||||
|
||||
enet2: ethernet@26000 {
|
||||
tbi-handle = <&tbi2>;
|
||||
phy-handle = <&phy2>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
};
|
||||
};
|
||||
|
||||
&board_pci1 {
|
||||
pcie@0 {
|
||||
interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
|
||||
interrupt-map = <
|
||||
|
||||
// IDSEL 0x11 func 0 - PCI slot 1
|
||||
0x8800 0x0 0x0 0x1 &i8259 0x9 0x2
|
||||
0x8800 0x0 0x0 0x2 &i8259 0xa 0x2
|
||||
|
||||
// IDSEL 0x11 func 1 - PCI slot 1
|
||||
0x8900 0x0 0x0 0x1 &i8259 0x9 0x2
|
||||
0x8900 0x0 0x0 0x2 &i8259 0xa 0x2
|
||||
|
||||
// IDSEL 0x11 func 2 - PCI slot 1
|
||||
0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2
|
||||
0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2
|
||||
|
||||
// IDSEL 0x11 func 3 - PCI slot 1
|
||||
0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2
|
||||
0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2
|
||||
|
||||
// IDSEL 0x11 func 4 - PCI slot 1
|
||||
0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2
|
||||
0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2
|
||||
|
||||
// IDSEL 0x11 func 5 - PCI slot 1
|
||||
0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2
|
||||
0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2
|
||||
|
||||
// IDSEL 0x11 func 6 - PCI slot 1
|
||||
0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2
|
||||
0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2
|
||||
|
||||
// IDSEL 0x11 func 7 - PCI slot 1
|
||||
0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2
|
||||
0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2
|
||||
|
||||
// IDSEL 0x1d Audio
|
||||
0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
|
||||
|
||||
// IDSEL 0x1e Legacy
|
||||
0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
|
||||
0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
|
||||
|
||||
// IDSEL 0x1f IDE/SATA
|
||||
0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
|
||||
0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
|
||||
>;
|
||||
|
||||
uli1575@0 {
|
||||
reg = <0x0 0x0 0x0 0x0 0x0>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
ranges = <0x2000000 0x0 0xa0000000
|
||||
0x2000000 0x0 0xa0000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x10000>;
|
||||
isa@1e {
|
||||
device_type = "isa";
|
||||
#interrupt-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
#address-cells = <2>;
|
||||
reg = <0xf000 0x0 0x0 0x0 0x0>;
|
||||
ranges = <0x1 0x0 0x1000000 0x0 0x0
|
||||
0x1000>;
|
||||
interrupt-parent = <&i8259>;
|
||||
|
||||
i8259: interrupt-controller@20 {
|
||||
reg = <0x1 0x20 0x2
|
||||
0x1 0xa0 0x2
|
||||
0x1 0x4d0 0x2>;
|
||||
interrupt-controller;
|
||||
device_type = "interrupt-controller";
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
compatible = "chrp,iic";
|
||||
interrupts = <4 1 0 0>;
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
i8042@60 {
|
||||
#size-cells = <0>;
|
||||
#address-cells = <1>;
|
||||
reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
|
||||
interrupts = <1 3 12 3>;
|
||||
interrupt-parent =
|
||||
<&i8259>;
|
||||
|
||||
keyboard@0 {
|
||||
reg = <0x0>;
|
||||
compatible = "pnpPNP,303";
|
||||
};
|
||||
|
||||
mouse@1 {
|
||||
reg = <0x1>;
|
||||
compatible = "pnpPNP,f03";
|
||||
};
|
||||
};
|
||||
|
||||
rtc@70 {
|
||||
compatible = "pnpPNP,b00";
|
||||
reg = <0x1 0x70 0x2>;
|
||||
};
|
||||
|
||||
gpio@400 {
|
||||
reg = <0x1 0x400 0x80>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -14,6 +14,7 @@
|
|||
compatible = "fsl,P2020";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
|
|
@ -37,8 +38,7 @@
|
|||
#size-cells = <1>;
|
||||
compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
|
||||
reg = <0 0xffe05000 0 0x1000>;
|
||||
interrupts = <19 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <19 2 0 0>;
|
||||
};
|
||||
|
||||
soc@ffe00000 {
|
||||
|
|
@ -58,15 +58,13 @@
|
|||
ecm@1000 {
|
||||
compatible = "fsl,p2020-ecm", "fsl,ecm";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <17 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <17 2 0 0>;
|
||||
};
|
||||
|
||||
memory-controller@2000 {
|
||||
compatible = "fsl,p2020-memory-controller";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <18 2>;
|
||||
interrupts = <18 2 0 0>;
|
||||
};
|
||||
|
||||
i2c@3000 {
|
||||
|
|
@ -75,8 +73,7 @@
|
|||
cell-index = <0>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x3000 0x100>;
|
||||
interrupts = <43 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <43 2 0 0>;
|
||||
dfsrr;
|
||||
};
|
||||
|
||||
|
|
@ -86,8 +83,7 @@
|
|||
cell-index = <1>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x3100 0x100>;
|
||||
interrupts = <43 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <43 2 0 0>;
|
||||
dfsrr;
|
||||
};
|
||||
|
||||
|
|
@ -97,8 +93,7 @@
|
|||
compatible = "ns16550";
|
||||
reg = <0x4500 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <42 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <42 2 0 0>;
|
||||
};
|
||||
|
||||
serial1: serial@4600 {
|
||||
|
|
@ -107,8 +102,7 @@
|
|||
compatible = "ns16550";
|
||||
reg = <0x4600 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <42 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <42 2 0 0>;
|
||||
};
|
||||
|
||||
spi@7000 {
|
||||
|
|
@ -117,8 +111,7 @@
|
|||
#size-cells = <0>;
|
||||
compatible = "fsl,espi";
|
||||
reg = <0x7000 0x1000>;
|
||||
interrupts = <59 0x2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <59 0x2 0 0>;
|
||||
mode = "cpu";
|
||||
};
|
||||
|
||||
|
|
@ -133,29 +126,25 @@
|
|||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x0 0x80>;
|
||||
cell-index = <0>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <76 2>;
|
||||
interrupts = <76 2 0 0>;
|
||||
};
|
||||
dma-channel@80 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x80 0x80>;
|
||||
cell-index = <1>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <77 2>;
|
||||
interrupts = <77 2 0 0>;
|
||||
};
|
||||
dma-channel@100 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x100 0x80>;
|
||||
cell-index = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <78 2>;
|
||||
interrupts = <78 2 0 0>;
|
||||
};
|
||||
dma-channel@180 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x180 0x80>;
|
||||
cell-index = <3>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <79 2>;
|
||||
interrupts = <79 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -163,8 +152,7 @@
|
|||
#gpio-cells = <2>;
|
||||
compatible = "fsl,mpc8572-gpio";
|
||||
reg = <0xf000 0x100>;
|
||||
interrupts = <47 0x2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <47 0x2 0 0>;
|
||||
gpio-controller;
|
||||
};
|
||||
|
||||
|
|
@ -173,8 +161,7 @@
|
|||
reg = <0x20000 0x1000>;
|
||||
cache-line-size = <32>; // 32 bytes
|
||||
cache-size = <0x80000>; // L2,512K
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <16 2>;
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
dma@21300 {
|
||||
|
|
@ -188,29 +175,25 @@
|
|||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x0 0x80>;
|
||||
cell-index = <0>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <20 2>;
|
||||
interrupts = <20 2 0 0>;
|
||||
};
|
||||
dma-channel@80 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x80 0x80>;
|
||||
cell-index = <1>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <21 2>;
|
||||
interrupts = <21 2 0 0>;
|
||||
};
|
||||
dma-channel@100 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x100 0x80>;
|
||||
cell-index = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <22 2>;
|
||||
interrupts = <22 2 0 0>;
|
||||
};
|
||||
dma-channel@180 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x180 0x80>;
|
||||
cell-index = <3>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <23 2>;
|
||||
interrupts = <23 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -219,8 +202,7 @@
|
|||
#size-cells = <0>;
|
||||
compatible = "fsl-usb2-dr";
|
||||
reg = <0x22000 0x1000>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <28 0x2>;
|
||||
interrupts = <28 0x2 0 0>;
|
||||
};
|
||||
|
||||
mdio@24520 {
|
||||
|
|
@ -254,8 +236,7 @@
|
|||
reg = <0x24000 0x1000>;
|
||||
ranges = <0x0 0x24000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <29 2 30 2 34 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
|
||||
};
|
||||
|
||||
enet1: ethernet@25000 {
|
||||
|
|
@ -268,8 +249,7 @@
|
|||
reg = <0x25000 0x1000>;
|
||||
ranges = <0x0 0x25000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <35 2 36 2 40 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
|
||||
|
||||
};
|
||||
|
||||
|
|
@ -283,16 +263,14 @@
|
|||
reg = <0x26000 0x1000>;
|
||||
ranges = <0x0 0x26000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <31 2 32 2 33 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
|
||||
|
||||
};
|
||||
|
||||
sdhci@2e000 {
|
||||
compatible = "fsl,p2020-esdhc", "fsl,esdhc";
|
||||
reg = <0x2e000 0x1000>;
|
||||
interrupts = <72 0x2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <72 0x2 0 0>;
|
||||
/* Filled in by U-Boot */
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
|
@ -301,8 +279,7 @@
|
|||
compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
|
||||
"fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
|
||||
reg = <0x30000 0x10000>;
|
||||
interrupts = <45 2 58 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <45 2 0 0 58 2 0 0>;
|
||||
fsl,num-channels = <4>;
|
||||
fsl,channel-fifo-len = <24>;
|
||||
fsl,exec-units-mask = <0xbfe>;
|
||||
|
|
@ -323,15 +300,14 @@
|
|||
reg = <0x41600 0x80>;
|
||||
msi-available-ranges = <0 0x100>;
|
||||
interrupts = <
|
||||
0xe0 0
|
||||
0xe1 0
|
||||
0xe2 0
|
||||
0xe3 0
|
||||
0xe4 0
|
||||
0xe5 0
|
||||
0xe6 0
|
||||
0xe7 0>;
|
||||
interrupt-parent = <&mpic>;
|
||||
0xe0 0 0 0
|
||||
0xe1 0 0 0
|
||||
0xe2 0 0 0
|
||||
0xe3 0 0 0
|
||||
0xe4 0 0 0
|
||||
0xe5 0 0 0
|
||||
0xe6 0 0 0
|
||||
0xe7 0 0 0>;
|
||||
};
|
||||
|
||||
global-utilities@e0000 { //global utilities block
|
||||
|
|
@ -350,8 +326,7 @@
|
|||
reg = <0 0xffe08000 0 0x1000>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <24 2>;
|
||||
interrupts = <24 2 0 0>;
|
||||
};
|
||||
|
||||
pci1: pcie@ffe09000 {
|
||||
|
|
@ -363,8 +338,7 @@
|
|||
reg = <0 0xffe09000 0 0x1000>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <25 2>;
|
||||
interrupts = <25 2 0 0>;
|
||||
};
|
||||
|
||||
pci2: pcie@ffe0a000 {
|
||||
|
|
@ -376,7 +350,6 @@
|
|||
reg = <0 0xffe0a000 0 0x1000>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <26 2>;
|
||||
interrupts = <26 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
Loading…
Reference in New Issue