ACPI: request correct fixed hardware resource type (MMIO vs I/O port)

ACPI supports fixed hardware (PM_TMR, GPE blocks, etc) in either I/O port
or MMIO space, but used to always request the regions from I/O space
because it didn't check the address_space_id.

Sample ACPI fixed hardware in MMIO space (HP rx2600), was incorrectly
reported in /proc/ioports, now reported in /proc/iomem:

    ff5c1004-ff5c1007 : PM_TMR
    ff5c1008-ff5c100b : PM1a_EVT_BLK
    ff5c100c-ff5c100d : PM1a_CNT_BLK
    ff5c1010-ff5c1013 : GPE0_BLK
    ff5c1014-ff5c1017 : GPE1_BLK

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Len Brown <len.brown@intel.com>
This commit is contained in:
Bjorn Helgaas 2006-03-28 17:04:00 -05:00 committed by Len Brown
parent 683aa4012f
commit 81507ea9cf

View file

@ -123,41 +123,46 @@ static struct acpi_driver acpi_motherboard_driver2 = {
},
};
static void __init acpi_request_region (struct acpi_generic_address *addr,
unsigned int length, char *desc)
{
if (!addr->address || !length)
return;
if (addr->address_space_id == ACPI_ADR_SPACE_SYSTEM_IO)
request_region(addr->address, length, desc);
else if (addr->address_space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
request_mem_region(addr->address, length, desc);
}
static void __init acpi_reserve_resources(void)
{
if (acpi_gbl_FADT->xpm1a_evt_blk.address && acpi_gbl_FADT->pm1_evt_len)
request_region(acpi_gbl_FADT->xpm1a_evt_blk.address,
acpi_request_region(&acpi_gbl_FADT->xpm1a_evt_blk,
acpi_gbl_FADT->pm1_evt_len, "PM1a_EVT_BLK");
if (acpi_gbl_FADT->xpm1b_evt_blk.address && acpi_gbl_FADT->pm1_evt_len)
request_region(acpi_gbl_FADT->xpm1b_evt_blk.address,
acpi_request_region(&acpi_gbl_FADT->xpm1b_evt_blk,
acpi_gbl_FADT->pm1_evt_len, "PM1b_EVT_BLK");
if (acpi_gbl_FADT->xpm1a_cnt_blk.address && acpi_gbl_FADT->pm1_cnt_len)
request_region(acpi_gbl_FADT->xpm1a_cnt_blk.address,
acpi_request_region(&acpi_gbl_FADT->xpm1a_cnt_blk,
acpi_gbl_FADT->pm1_cnt_len, "PM1a_CNT_BLK");
if (acpi_gbl_FADT->xpm1b_cnt_blk.address && acpi_gbl_FADT->pm1_cnt_len)
request_region(acpi_gbl_FADT->xpm1b_cnt_blk.address,
acpi_request_region(&acpi_gbl_FADT->xpm1b_cnt_blk,
acpi_gbl_FADT->pm1_cnt_len, "PM1b_CNT_BLK");
if (acpi_gbl_FADT->xpm_tmr_blk.address && acpi_gbl_FADT->pm_tm_len == 4)
request_region(acpi_gbl_FADT->xpm_tmr_blk.address, 4, "PM_TMR");
if (acpi_gbl_FADT->pm_tm_len == 4)
acpi_request_region(&acpi_gbl_FADT->xpm_tmr_blk, 4, "PM_TMR");
if (acpi_gbl_FADT->xpm2_cnt_blk.address && acpi_gbl_FADT->pm2_cnt_len)
request_region(acpi_gbl_FADT->xpm2_cnt_blk.address,
acpi_request_region(&acpi_gbl_FADT->xpm2_cnt_blk,
acpi_gbl_FADT->pm2_cnt_len, "PM2_CNT_BLK");
/* Length of GPE blocks must be a non-negative multiple of 2 */
if (acpi_gbl_FADT->xgpe0_blk.address && acpi_gbl_FADT->gpe0_blk_len &&
!(acpi_gbl_FADT->gpe0_blk_len & 0x1))
request_region(acpi_gbl_FADT->xgpe0_blk.address,
if (!(acpi_gbl_FADT->gpe0_blk_len & 0x1))
acpi_request_region(&acpi_gbl_FADT->xgpe0_blk,
acpi_gbl_FADT->gpe0_blk_len, "GPE0_BLK");
if (acpi_gbl_FADT->xgpe1_blk.address && acpi_gbl_FADT->gpe1_blk_len &&
!(acpi_gbl_FADT->gpe1_blk_len & 0x1))
request_region(acpi_gbl_FADT->xgpe1_blk.address,
if (!(acpi_gbl_FADT->gpe1_blk_len & 0x1))
acpi_request_region(&acpi_gbl_FADT->xgpe1_blk,
acpi_gbl_FADT->gpe1_blk_len, "GPE1_BLK");
}