drm/rockchip: analogix_dp: add rk3399 eDP support

RK3399 and RK3288 shared the same eDP IP controller, only some light
difference with VOP configure and GRF configure.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Acked-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Tomasz Figa <tomasz.figa@chromium.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>

Documentation/devicetree/bindings/display/bridge/analogix_dp.txt

@@ -5,6 +5,7 @@ Required properties for dp-controller:
 		platform specific such as:
 		 * "samsung,exynos5-dp"
 		 * "rockchip,rk3288-dp"
+		 * "rockchip,rk3399-edp"
 	-reg:
 		physical base address of the controller and length
 		of memory mapped region.

Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt

@@ -2,7 +2,8 @@ Rockchip RK3288 specific extensions to the Analogix Display Port
 ================================
 
 Required properties:
-- compatible: "rockchip,rk3288-edp";
+- compatible: "rockchip,rk3288-edp",
+	      "rockchip,rk3399-edp";
 
 - reg: physical base address of the controller and length
 

drivers/gpu/drm/bridge/analogix/analogix_dp_core.c

@@ -1208,6 +1208,7 @@ static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp)
 
 	switch (dp->plat_data->dev_type) {
 	case RK3288_DP:
+	case RK3399_EDP:
 		/*
 		 * Like Rk3288 DisplayPort TRM indicate that "Main link
 		 * containing 4 physical lanes of 2.7/1.62 Gbps/lane".

drivers/gpu/drm/rockchip/analogix_dp-rockchip.c

@@ -36,6 +36,8 @@
 
 #define RK3288_GRF_SOC_CON6		0x25c
 #define RK3288_EDP_LCDC_SEL		BIT(5)
+#define RK3399_GRF_SOC_CON20		0x6250
+#define RK3399_EDP_LCDC_SEL		BIT(5)
 
 #define HIWORD_UPDATE(val, mask)	(val | (mask) << 16)
 
@@ -159,6 +161,8 @@ rockchip_dp_drm_encoder_atomic_check(struct drm_encoder *encoder,
 				      struct drm_connector_state *conn_state)
 {
 	struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state);
+	struct rockchip_dp_device *dp = to_dp(encoder);
+	int ret;
 
 	/*
 	 * FIXME(Yakir): driver should configure the CRTC output video
@@ -173,8 +177,19 @@ rockchip_dp_drm_encoder_atomic_check(struct drm_encoder *encoder,
 	 * But if I configure CTRC to RGBaaa, and eDP driver still keep
 	 * RGB666 input video mode, then screen would works prefect.
 	 */
+
 	s->output_mode = ROCKCHIP_OUT_MODE_AAAA;
 	s->output_type = DRM_MODE_CONNECTOR_eDP;
+	if (dp->data->chip_type == RK3399_EDP) {
+		/*
+		 * For RK3399, VOP Lit must code the out mode to RGB888,
+		 * VOP Big must code the out mode to RGB10.
+		 */
+		ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node,
+							encoder);
+		if (ret > 0)
+			s->output_mode = ROCKCHIP_OUT_MODE_P888;
+	}
 
 	return 0;
 }
@@ -378,6 +393,13 @@ static const struct dev_pm_ops rockchip_dp_pm_ops = {
 #endif
 };
 
+static const struct rockchip_dp_chip_data rk3399_edp = {
+	.lcdsel_grf_reg = RK3399_GRF_SOC_CON20,
+	.lcdsel_big = HIWORD_UPDATE(0, RK3399_EDP_LCDC_SEL),
+	.lcdsel_lit = HIWORD_UPDATE(RK3399_EDP_LCDC_SEL, RK3399_EDP_LCDC_SEL),
+	.chip_type = RK3399_EDP,
+};
+
 static const struct rockchip_dp_chip_data rk3288_dp = {
 	.lcdsel_grf_reg = RK3288_GRF_SOC_CON6,
 	.lcdsel_big = HIWORD_UPDATE(0, RK3288_EDP_LCDC_SEL),
@@ -387,6 +409,7 @@ static const struct rockchip_dp_chip_data rk3288_dp = {
 
 static const struct of_device_id rockchip_dp_dt_ids[] = {
 	{.compatible = "rockchip,rk3288-dp", .data = &rk3288_dp },
+	{.compatible = "rockchip,rk3399-edp", .data = &rk3399_edp },
 	{}
 };
 MODULE_DEVICE_TABLE(of, rockchip_dp_dt_ids);

include/drm/bridge/analogix_dp.h

@@ -16,11 +16,12 @@
 enum analogix_dp_devtype {
 	EXYNOS_DP,
 	RK3288_DP,
+	RK3399_EDP,
 };
 
 static inline bool is_rockchip(enum analogix_dp_devtype type)
 {
-	return type == RK3288_DP;
+	return type == RK3288_DP || type == RK3399_EDP;
 }
 
 struct analogix_dp_plat_data {