From 6d1a2adef782d26113d4f18a617ccb33c4774d54 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Mon, 7 Dec 2015 14:21:37 +0300 Subject: [PATCH 01/10] ARC: [axs10x] cap ethernet phy to 100 Mbit/sec Current ARC SDP boards cannot reliably handle 1Gbit Ethernet connections due to limitations in hardware. To make sure networking is stable on the board we're limiting phy to 100 Mbit. Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta --- arch/arc/boot/dts/axs10x_mb.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi index f3db32154973..44a578c10732 100644 --- a/arch/arc/boot/dts/axs10x_mb.dtsi +++ b/arch/arc/boot/dts/axs10x_mb.dtsi @@ -46,6 +46,7 @@ snps,pbl = < 32 >; clocks = <&apbclk>; clock-names = "stmmaceth"; + max-speed = <100>; }; ehci@0x40000 { From 8eb0984bf4fe82237f95481ff0afe514a676c717 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 11 Dec 2015 15:54:03 +0530 Subject: [PATCH 02/10] ARCv2: intc: Fix random perf irq disabling in SMP setup As part of fixing another perf issue, observed that after a perf run, the interrupt got disabled on one/more cores. Turns out that despite requesting perf irq as percpu, the flow handler registered was not handle_percpu_irq() Given that on ARCv2 cores, IRQs < 24 are always private to cpu, we register the right handler at the very onset. Before Fix | [ARCLinux]# cat /proc/interrupts | grep perf | 20: 0 0 0 0 ARCv2 core Intc 20 ARC perf counters | | [ARCLinux]# perf record -c 20000 /sbin/hackbench | Running with 10*40 (== 400) tasks. | | [ARCLinux]# cat /proc/interrupts | grep perf | 20: 0 522 8 51916 ARCv2 core Intc 20 ARC perf counters | | [ARCLinux]# perf record -c 20000 /sbin/hackbench | Running with 10*40 (== 400) tasks. | | [ARCLinux]# cat /proc/interrupts | grep perf | 20: 0 522 8 104368 ARCv2 core Intc 20 ARC perf counters After Fix | [ARCLinux]# cat /proc/interrupts | grep perf | 20: 0 0 0 0 ARCv2 core Intc 20 ARC perf counters | | [ARCLinux]# perf record -c 20000 /sbin/hackbench | Running with 10*40 (== 400) tasks. | | [ARCLinux]# cat /proc/interrupts | grep perf | 20: 64198 62012 62697 67803 ARCv2 core Intc 20 ARC perf counters | | [ARCLinux]# perf record -c 20000 /sbin/hackbench | Running with 10*40 (== 400) tasks. | | [ARCLinux]# cat /proc/interrupts | grep perf | 20: 126014 122792 123301 133654 ARCv2 core Intc 20 ARC perf counters Cc: Marc Zyngier Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: Alexey Brodkin Cc: stable@vger.kernel.org #4.2+ Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta --- arch/arc/kernel/intc-arcv2.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c index 26c156827479..0394f9f61b46 100644 --- a/arch/arc/kernel/intc-arcv2.c +++ b/arch/arc/kernel/intc-arcv2.c @@ -106,10 +106,21 @@ static struct irq_chip arcv2_irq_chip = { static int arcv2_irq_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) { - if (irq == TIMER0_IRQ || irq == IPI_IRQ) + /* + * core intc IRQs [16, 23]: + * Statically assigned always private-per-core (Timers, WDT, IPI, PCT) + */ + if (hw < 24) { + /* + * A subsequent request_percpu_irq() fails if percpu_devid is + * not set. That in turns sets NOAUTOEN, meaning each core needs + * to call enable_percpu_irq() + */ + irq_set_percpu_devid(irq); irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_percpu_irq); - else + } else { irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_level_irq); + } return 0; } From 5bf704c204440b1e90251382ee07a2dc5e4960ec Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 11 Dec 2015 16:16:11 +0530 Subject: [PATCH 03/10] ARC: intc: No need to clear IRQ_NOAUTOEN arc_request_percpu_irq() is called by all cores to request/enable percpu irq. It has some "prep" calls needed by genirq: - setup percpu devid - disable IRQ_NOAUTOEN However given that enable_percpu_irq() is called enayways, latter can be avoided. We are now left with irq_set_percpu_devid() quirk and that too for ARCompact builds only, since previous patch updated ARCv2 intc to do this in the "right" place, i.e. irq map function. By next release, this will ultimately be fixed for ARCompact as well. Cc: Marc Zyngier Cc: Thomas Gleixner Cc: Alexey Brodkin Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta --- arch/arc/kernel/irq.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c index 2ee226546c6a..d736678d2724 100644 --- a/arch/arc/kernel/irq.c +++ b/arch/arc/kernel/irq.c @@ -60,14 +60,17 @@ void arc_request_percpu_irq(int irq, int cpu, if (!cpu) { int rc; +#ifdef CONFIG_ISA_ARCOMPACT /* - * These 2 calls are essential to making percpu IRQ APIs work - * Ideally these details could be hidden in irq chip map function - * but the issue is IPIs IRQs being static (non-DT) and platform - * specific, so we can't identify them there. + * A subsequent request_percpu_irq() fails if percpu_devid is + * not set. That in turns sets NOAUTOEN, meaning each core needs + * to call enable_percpu_irq() + * + * For ARCv2, this is done in irq map function since we know + * which irqs are strictly per cpu */ irq_set_percpu_devid(irq); - irq_modify_status(irq, IRQ_NOAUTOEN, 0); /* @irq, @clr, @set */ +#endif rc = request_percpu_irq(irq, isr, irq_nm, percpu_dev); if (rc) From c6317bc7c5ab87ba0672a5fab8ef94829f78be02 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 11 Dec 2015 13:13:12 +0530 Subject: [PATCH 04/10] ARCv2: perf: Ensure perf intr gets enabled on all cores This was the second perf intr issue perf sampling on multicore requires intr to be enabled on all cores. ARC perf probe code used helper arc_request_percpu_irq() which calls - request_percpu_irq() on core0 - enable_percpu_irq() on all all cores (including core0) genirq requires that request be made ahead of enable call. However if perf probe happened on non core0 (observed on a 3.18 kernel), enable would get called ahead of request, failing obviously and rendering perf intr disabled on all such cores [ 11.120000] 1 ARC perf : 8 counters (48 bits), 113 conditions, [overflow IRQ support] [ 11.130000] 1 -----> enable_percpu_irq() IRQ 20 failed [ 11.140000] 3 -----> enable_percpu_irq() IRQ 20 failed [ 11.140000] 2 -----> enable_percpu_irq() IRQ 20 failed [ 11.140000] 0 =====> request_percpu_irq() IRQ 20 [ 11.140000] 0 -----> enable_percpu_irq() IRQ 20 Fix this fragility, by calling request_percpu_irq() on whatever core calls probe (there is no requirement on which core calls this anyways) and then calling enable on each cores. Interestingly this started as invesigation of STAR 9000838902: "sporadically IRQs enabled on perf prob" which was about occassional boot spew as request_percpu_irq got called non-locally (from an IPI), and re-enabled interrupts in following path proc_mkdir -> spin_unlock_irq() which the irq work code didn't like. | ARC perf : 8 counters (48 bits), 113 conditions, [overflow IRQ support] | | BUG: failure at ../kernel/irq_work.c:135/irq_work_run_list()! | CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.10-01127-g285efb8e66d1 #2 | | Stack Trace: | arc_unwind_core.constprop.1+0x94/0x104 | dump_stack+0x62/0x98 | irq_work_run_list+0xb0/0xb4 | irq_work_run+0x22/0x3c | do_IPI+0x74/0x9c | handle_irq_event_percpu+0x34/0x164 | handle_percpu_irq+0x58/0x78 | generic_handle_irq+0x1e/0x2c | arch_do_IRQ+0x3c/0x60 | ret_from_exception+0x0/0x8 Cc: Marc Zyngier Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: Alexey Brodkin Cc: #4.2+ Signed-off-by: Vineet Gupta --- arch/arc/kernel/perf_event.c | 30 ++++++++---------------------- 1 file changed, 8 insertions(+), 22 deletions(-) diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c index 0c08bb1ce15a..8b134cfe5e1f 100644 --- a/arch/arc/kernel/perf_event.c +++ b/arch/arc/kernel/perf_event.c @@ -428,12 +428,11 @@ static irqreturn_t arc_pmu_intr(int irq, void *dev) #endif /* CONFIG_ISA_ARCV2 */ -void arc_cpu_pmu_irq_init(void) +static void arc_cpu_pmu_irq_init(void *data) { - struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu); + int irq = *(int *)data; - arc_request_percpu_irq(arc_pmu->irq, smp_processor_id(), arc_pmu_intr, - "ARC perf counters", pmu_cpu); + enable_percpu_irq(irq, IRQ_TYPE_NONE); /* Clear all pending interrupt flags */ write_aux_reg(ARC_REG_PCT_INT_ACT, 0xffffffff); @@ -515,7 +514,6 @@ static int arc_pmu_device_probe(struct platform_device *pdev) if (has_interrupts) { int irq = platform_get_irq(pdev, 0); - unsigned long flags; if (irq < 0) { pr_err("Cannot get IRQ number for the platform\n"); @@ -524,24 +522,12 @@ static int arc_pmu_device_probe(struct platform_device *pdev) arc_pmu->irq = irq; - /* - * arc_cpu_pmu_irq_init() needs to be called on all cores for - * their respective local PMU. - * However we use opencoded on_each_cpu() to ensure it is called - * on core0 first, so that arc_request_percpu_irq() sets up - * AUTOEN etc. Otherwise enable_percpu_irq() fails to enable - * perf IRQ on non master cores. - * see arc_request_percpu_irq() - */ - preempt_disable(); - local_irq_save(flags); - arc_cpu_pmu_irq_init(); - local_irq_restore(flags); - smp_call_function((smp_call_func_t)arc_cpu_pmu_irq_init, 0, 1); - preempt_enable(); + /* intc map function ensures irq_set_percpu_devid() called */ + request_percpu_irq(irq, arc_pmu_intr, "ARC perf counters", + this_cpu_ptr(&arc_pmu_cpu)); + + on_each_cpu(arc_cpu_pmu_irq_init, &irq, 1); - /* Clean all pending interrupt flags */ - write_aux_reg(ARC_REG_PCT_INT_ACT, 0xffffffff); } else arc_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT; From c512c6ba7ac41b8bc196f17a85ee52099a109146 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 11 Dec 2015 19:31:23 +0530 Subject: [PATCH 05/10] ARC: intc: Document arc_request_percpu_irq() better Signed-off-by: Vineet Gupta --- arch/arc/kernel/irq.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c index d736678d2724..b1f75937f0e1 100644 --- a/arch/arc/kernel/irq.c +++ b/arch/arc/kernel/irq.c @@ -51,6 +51,18 @@ void arch_do_IRQ(unsigned int irq, struct pt_regs *regs) set_irq_regs(old_regs); } +/* + * API called for requesting percpu interrupts - called by each CPU + * - For boot CPU, actually request the IRQ with genirq core + enables + * - For subsequent callers only enable called locally + * + * Relies on being called by boot cpu first (i.e. request called ahead) of + * any enable as expected by genirq. Hence Suitable only for TIMER, IPI + * which are guaranteed to be setup on boot core first. + * Late probed peripherals such as perf can't use this as there no guarantee + * of being called on boot CPU first. + */ + void arc_request_percpu_irq(int irq, int cpu, irqreturn_t (*isr)(int irq, void *dev), const char *irq_nm, From ff1c0b6a795bce744527bc10c8268127ed818b42 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Tue, 15 Dec 2015 13:57:16 +0530 Subject: [PATCH 06/10] ARC: [plat-sim] unbork non default CONFIG_LINUX_LINK_BASE HIGHMEM support bumped the default memory size for nsim platform to 1G. Thus total memory ended at the very edge of start of peripherals address space. With linux link base shifted, memory started bleeding into peripheral space which caused early boot bad_page spew ! Fixes: 29e332261d2 ("ARC: mm: HIGHMEM: populate high memory from DT") Reported-by: Anton Kolesov Signed-off-by: Vineet Gupta --- arch/arc/Kconfig | 1 + arch/arc/boot/dts/nsim_hs.dts | 3 ++- arch/arc/mm/init.c | 4 +++- 3 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 2c2ac3f3ff80..6312f607932f 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -445,6 +445,7 @@ config LINUX_LINK_BASE However some customers have peripherals mapped at this addr, so Linux needs to be scooted a bit. If you don't know what the above means, leave this setting alone. + This needs to match memory start address specified in Device Tree config HIGHMEM bool "High Memory Support" diff --git a/arch/arc/boot/dts/nsim_hs.dts b/arch/arc/boot/dts/nsim_hs.dts index b0eb0e7fe21d..fc81879bc1f5 100644 --- a/arch/arc/boot/dts/nsim_hs.dts +++ b/arch/arc/boot/dts/nsim_hs.dts @@ -17,7 +17,8 @@ memory { device_type = "memory"; - reg = <0x0 0x80000000 0x0 0x40000000 /* 1 GB low mem */ + /* CONFIG_LINUX_LINK_BASE needs to match low mem start */ + reg = <0x0 0x80000000 0x0 0x20000000 /* 512 MB low mem */ 0x1 0x00000000 0x0 0x40000000>; /* 1 GB highmem */ }; diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c index a9305b5a2cd4..7d2c4fbf4f22 100644 --- a/arch/arc/mm/init.c +++ b/arch/arc/mm/init.c @@ -51,7 +51,9 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size) int in_use = 0; if (!low_mem_sz) { - BUG_ON(base != low_mem_start); + if (base != low_mem_start) + panic("CONFIG_LINUX_LINK_BASE != DT memory { }"); + low_mem_sz = size; in_use = 1; } else { From bc79c9a7216562a2035d2f64f73626613c1300d0 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 11 Dec 2015 18:04:22 +0530 Subject: [PATCH 07/10] ARC: dw2 unwind: Reinstante unwinding out of modules The fix which removed linear searching of dwarf (because binary lookup data always exists) missed out on the fact that modules don't get the binary lookup tables info. This caused unwinding out of modules to stop working. So add binary lookup header setup (equivalent of eh_frame_hdr setup) to modules as well. While at it, confine the header setup to within unwinder code, reducing one API exposed out of unwinder code. Fixes: 2e22502c080f ARC: dw2 unwind: Remove falllback linear search thru FDE entries Cc: Signed-off-by: Vineet Gupta --- arch/arc/include/asm/unwind.h | 4 ---- arch/arc/kernel/setup.c | 1 - arch/arc/kernel/unwind.c | 40 +++++++++++++++++++++++------------ 3 files changed, 26 insertions(+), 19 deletions(-) diff --git a/arch/arc/include/asm/unwind.h b/arch/arc/include/asm/unwind.h index 7ca628b6ee2a..c11a25bb8158 100644 --- a/arch/arc/include/asm/unwind.h +++ b/arch/arc/include/asm/unwind.h @@ -112,7 +112,6 @@ struct unwind_frame_info { extern int arc_unwind(struct unwind_frame_info *frame); extern void arc_unwind_init(void); -extern void arc_unwind_setup(void); extern void *unwind_add_table(struct module *module, const void *table_start, unsigned long table_size); extern void unwind_remove_table(void *handle, int init_only); @@ -152,9 +151,6 @@ static inline void arc_unwind_init(void) { } -static inline void arc_unwind_setup(void) -{ -} #define unwind_add_table(a, b, c) #define unwind_remove_table(a, b) diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index c33e77c0ad3e..e1b87444ea9a 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -429,7 +429,6 @@ void __init setup_arch(char **cmdline_p) #endif arc_unwind_init(); - arc_unwind_setup(); } static int __init customize_machine(void) diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c index 7352475451f6..9f9ecc15556e 100644 --- a/arch/arc/kernel/unwind.c +++ b/arch/arc/kernel/unwind.c @@ -170,6 +170,23 @@ static struct unwind_table *find_table(unsigned long pc) static unsigned long read_pointer(const u8 **pLoc, const void *end, signed ptrType); +static void init_unwind_hdr(struct unwind_table *table, + void *(*alloc) (unsigned long)); + +/* + * wrappers for header alloc (vs. calling one vs. other at call site) + * to elide section mismatches warnings + */ +static void *__init unw_hdr_alloc_early(unsigned long sz) +{ + return __alloc_bootmem_nopanic(sz, sizeof(unsigned int), + MAX_DMA_ADDRESS); +} + +static void *unw_hdr_alloc(unsigned long sz) +{ + return kmalloc(sz, GFP_KERNEL); +} static void init_unwind_table(struct unwind_table *table, const char *name, const void *core_start, unsigned long core_size, @@ -209,6 +226,8 @@ void __init arc_unwind_init(void) __start_unwind, __end_unwind - __start_unwind, NULL, 0); /*__start_unwind_hdr, __end_unwind_hdr - __start_unwind_hdr);*/ + + init_unwind_hdr(&root_table, unw_hdr_alloc_early); } static const u32 bad_cie, not_fde; @@ -241,8 +260,8 @@ static void swap_eh_frame_hdr_table_entries(void *p1, void *p2, int size) e2->fde = v; } -static void __init setup_unwind_table(struct unwind_table *table, - void *(*alloc) (unsigned long)) +static void init_unwind_hdr(struct unwind_table *table, + void *(*alloc) (unsigned long)) { const u8 *ptr; unsigned long tableSize = table->size, hdrSize; @@ -300,9 +319,11 @@ static void __init setup_unwind_table(struct unwind_table *table, hdrSize = 4 + sizeof(unsigned long) + sizeof(unsigned int) + 2 * n * sizeof(unsigned long); + header = alloc(hdrSize); if (!header) return; + header->version = 1; header->eh_frame_ptr_enc = DW_EH_PE_abs | DW_EH_PE_native; header->fde_count_enc = DW_EH_PE_abs | DW_EH_PE_data4; @@ -342,18 +363,6 @@ static void __init setup_unwind_table(struct unwind_table *table, table->header = (const void *)header; } -static void *__init balloc(unsigned long sz) -{ - return __alloc_bootmem_nopanic(sz, - sizeof(unsigned int), - __pa(MAX_DMA_ADDRESS)); -} - -void __init arc_unwind_setup(void) -{ - setup_unwind_table(&root_table, balloc); -} - #ifdef CONFIG_MODULES static struct unwind_table *last_table; @@ -377,6 +386,8 @@ void *unwind_add_table(struct module *module, const void *table_start, table_start, table_size, NULL, 0); + init_unwind_hdr(table, unw_hdr_alloc); + #ifdef UNWIND_DEBUG unw_debug("Table added for [%s] %lx %lx\n", module->name, table->core.pc, table->core.range); @@ -439,6 +450,7 @@ void unwind_remove_table(void *handle, int init_only) info.init_only = init_only; unlink_table(&info); /* XXX: SMP */ + kfree(table->header); kfree(table); } From 323f41f9e7d0cb5b1d1586aded6682855f1e646d Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 16 Dec 2015 17:17:00 +0530 Subject: [PATCH 08/10] ARC: dw2 unwind: Ignore CIE version !=1 gracefully instead of bailing ARC dwarf unwinder only supports CIE version == 1 The boot time dwarf sanitizer (part of binary lookup table constructor) would simply bail if it saw CIE version == 3, rendering unwinder with a NULL lookup table. It seems libgcc linked with kernel does have such entries. With fallback linear search removed, and a NULL binary lookup table, unwinder fails to generate any stack trace. So allow graceful ignoring of unsupported CIE entries. This problem was initially seen in Alexey's setup (and not mine) as he was using buildroot built toolchain (libgcc) which doesn't get built with CFLAGS_FOR_TARGET="-gdwarf-2 which is my default Fixes STAR 9000985048: "kernel unwinder broken with stock tools" Fixes: 2e22502c080f ARC: dw2 unwind: Remove falllback linear search thru FDE entries Reported-by Alexey Brodkin Cc: Signed-off-by: Vineet Gupta --- arch/arc/kernel/unwind.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c index 9f9ecc15556e..cf2828ab0905 100644 --- a/arch/arc/kernel/unwind.c +++ b/arch/arc/kernel/unwind.c @@ -293,13 +293,13 @@ static void init_unwind_hdr(struct unwind_table *table, const u32 *cie = cie_for_fde(fde, table); signed ptrType; - if (cie == ¬_fde) + if (cie == ¬_fde) /* only process FDE here */ continue; if (cie == NULL || cie == &bad_cie) - return; + continue; /* say FDE->CIE.version != 1 */ ptrType = fde_pointer_type(cie); if (ptrType < 0) - return; + continue; ptr = (const u8 *)(fde + 2); if (!read_pointer(&ptr, (const u8 *)(fde + 1) + *fde, @@ -343,6 +343,10 @@ static void init_unwind_hdr(struct unwind_table *table, if (fde[1] == 0xffffffff) continue; /* this is a CIE */ + + if (*(u8 *)(cie + 2) != 1) + continue; /* FDE->CIE.version not supported */ + ptr = (const u8 *)(fde + 2); header->table[n].start = read_pointer(&ptr, (const u8 *)(fde + 1) + @@ -519,7 +523,8 @@ static const u32 *cie_for_fde(const u32 *fde, const struct unwind_table *table) if (*cie <= sizeof(*cie) + 4 || *cie >= fde[1] - sizeof(*fde) || (*cie & (sizeof(*cie) - 1)) - || (cie[1] != 0xffffffff)) + || (cie[1] != 0xffffffff) + || ( *(u8 *)(cie + 2) != 1)) /* version 1 supported */ return NULL; /* this is not a (valid) CIE */ return cie; } From b474a02382b75f4a75c4e94eb9847aad28dd4a37 Mon Sep 17 00:00:00 2001 From: Noam Camus Date: Wed, 16 Dec 2015 03:10:27 +0200 Subject: [PATCH 09/10] ARC: rename smp operation init_irq_cpu() to init_per_cpu() This will better reflect its description i.e. "any needed setup..." and not just do an "IPI request". Signed-off-by: Noam Camus Acked-by: Vineet Gupta Signed-off-by: Vineet Gupta --- arch/arc/include/asm/smp.h | 4 ++-- arch/arc/kernel/irq.c | 4 ++-- arch/arc/kernel/mcip.c | 2 +- arch/arc/kernel/smp.c | 4 ++-- 4 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h index 133c867d15af..991380438d6b 100644 --- a/arch/arc/include/asm/smp.h +++ b/arch/arc/include/asm/smp.h @@ -48,7 +48,7 @@ extern int smp_ipi_irq_setup(int cpu, int irq); * @init_early_smp: A SMP specific h/w block can init itself * Could be common across platforms so not covered by * mach_desc->init_early() - * @init_irq_cpu: Called for each core so SMP h/w block driver can do + * @init_per_cpu: Called for each core so SMP h/w block driver can do * any needed setup per cpu (e.g. IPI request) * @cpu_kick: For Master to kickstart a cpu (optionally at a PC) * @ipi_send: To send IPI to a @cpu @@ -57,7 +57,7 @@ extern int smp_ipi_irq_setup(int cpu, int irq); struct plat_smp_ops { const char *info; void (*init_early_smp)(void); - void (*init_irq_cpu)(int cpu); + void (*init_per_cpu)(int cpu); void (*cpu_kick)(int cpu, unsigned long pc); void (*ipi_send)(int cpu); void (*ipi_clear)(int irq); diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c index b1f75937f0e1..3917fe7e62fc 100644 --- a/arch/arc/kernel/irq.c +++ b/arch/arc/kernel/irq.c @@ -29,8 +29,8 @@ void __init init_IRQ(void) #ifdef CONFIG_SMP /* a SMP H/w block could do IPI IRQ request here */ - if (plat_smp_ops.init_irq_cpu) - plat_smp_ops.init_irq_cpu(smp_processor_id()); + if (plat_smp_ops.init_per_cpu) + plat_smp_ops.init_per_cpu(smp_processor_id()); if (machine_desc->init_cpu_smp) machine_desc->init_cpu_smp(smp_processor_id()); diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c index 74a9b074ac3e..bd237acdf4f2 100644 --- a/arch/arc/kernel/mcip.c +++ b/arch/arc/kernel/mcip.c @@ -132,7 +132,7 @@ static void mcip_probe_n_setup(void) struct plat_smp_ops plat_smp_ops = { .info = smp_cpuinfo_buf, .init_early_smp = mcip_probe_n_setup, - .init_irq_cpu = mcip_setup_per_cpu, + .init_per_cpu = mcip_setup_per_cpu, .ipi_send = mcip_ipi_send, .ipi_clear = mcip_ipi_clear, }; diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c index 580587805fa3..0b061a475158 100644 --- a/arch/arc/kernel/smp.c +++ b/arch/arc/kernel/smp.c @@ -132,8 +132,8 @@ void start_kernel_secondary(void) pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu); /* Some SMP H/w setup - for each cpu */ - if (plat_smp_ops.init_irq_cpu) - plat_smp_ops.init_irq_cpu(cpu); + if (plat_smp_ops.init_per_cpu) + plat_smp_ops.init_per_cpu(cpu); if (machine_desc->init_cpu_smp) machine_desc->init_cpu_smp(cpu); From 575a9d4e2c09675c05db2bc781c5c33153ce932f Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 17 Dec 2015 12:22:21 +0530 Subject: [PATCH 10/10] ARC: smp: Rename platform hook @init_cpu_smp -> @init_per_cpu Makes it similar to smp_ops which also has callback with same name Signed-off-by: Vineet Gupta --- arch/arc/include/asm/mach_desc.h | 4 ++-- arch/arc/kernel/irq.c | 4 ++-- arch/arc/kernel/smp.c | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arc/include/asm/mach_desc.h b/arch/arc/include/asm/mach_desc.h index 6ff657a904b6..c28e6c347b49 100644 --- a/arch/arc/include/asm/mach_desc.h +++ b/arch/arc/include/asm/mach_desc.h @@ -23,7 +23,7 @@ * @dt_compat: Array of device tree 'compatible' strings * (XXX: although only 1st entry is looked at) * @init_early: Very early callback [called from setup_arch()] - * @init_cpu_smp: for each CPU as it is coming up (SMP as well as UP) + * @init_per_cpu: for each CPU as it is coming up (SMP as well as UP) * [(M):init_IRQ(), (o):start_kernel_secondary()] * @init_machine: arch initcall level callback (e.g. populate static * platform devices or parse Devicetree) @@ -35,7 +35,7 @@ struct machine_desc { const char **dt_compat; void (*init_early)(void); #ifdef CONFIG_SMP - void (*init_cpu_smp)(unsigned int); + void (*init_per_cpu)(unsigned int); #endif void (*init_machine)(void); void (*init_late)(void); diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c index 3917fe7e62fc..ba17f85285cf 100644 --- a/arch/arc/kernel/irq.c +++ b/arch/arc/kernel/irq.c @@ -32,8 +32,8 @@ void __init init_IRQ(void) if (plat_smp_ops.init_per_cpu) plat_smp_ops.init_per_cpu(smp_processor_id()); - if (machine_desc->init_cpu_smp) - machine_desc->init_cpu_smp(smp_processor_id()); + if (machine_desc->init_per_cpu) + machine_desc->init_per_cpu(smp_processor_id()); #endif } diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c index 0b061a475158..ef6e9e15b82a 100644 --- a/arch/arc/kernel/smp.c +++ b/arch/arc/kernel/smp.c @@ -135,8 +135,8 @@ void start_kernel_secondary(void) if (plat_smp_ops.init_per_cpu) plat_smp_ops.init_per_cpu(cpu); - if (machine_desc->init_cpu_smp) - machine_desc->init_cpu_smp(cpu); + if (machine_desc->init_per_cpu) + machine_desc->init_per_cpu(cpu); arc_local_timer_setup();