ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board.
The rev C1 Wandboard uses the Broadcom 4330 for WiFi and Bluetooth instead of the 4329. This changes the PADS assigned for the control lines. Another side effect of the change is that on the rev C1 board, usdhc driver can't detect the chip presence correctly so usdhc2 now needs its 'non-removeable' property removed. So that rev B1 and earlier can continue to work, this patch splits the board-specific definitions from imx6qdl-wandboard.dtsi into imx6qdl-wandboard-revb1.dtsi and imx6qdl-wandboard-revc1.dtsi. The new files include the original base imx6qdl-wandboard.dtsi which retains the common definitions. The existing imx6dl-wandboard.dts includes imx6qdl-wandboard-revc1.dtsi and imx6dl-wandboard-revb1.dts (new) includes imx6qdl-wandboard-revb1.dtsi. This makes the rev C1 board the new default. The same pattern is used for imx6q-wandboard.dts. So, from U-Boot on a WB-Quad you use imxq-wandboard-revb1.dtb for the older B1 board and imxq-wandboard.dtb for the current rev C1 board. Signed-off-by: George Joseph <george.joseph@fairview5.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
This commit is contained in:
parent
025781539a
commit
8536239e37
|
@ -205,6 +205,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
|
|||
imx6dl-tx6u-801x.dtb \
|
||||
imx6dl-tx6u-811x.dtb \
|
||||
imx6dl-wandboard.dtb \
|
||||
imx6dl-wandboard-revb1.dtb \
|
||||
imx6q-arm2.dtb \
|
||||
imx6q-cm-fx6.dtb \
|
||||
imx6q-cubox-i.dtb \
|
||||
|
@ -224,6 +225,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
|
|||
imx6q-sbc6x.dtb \
|
||||
imx6q-udoo.dtb \
|
||||
imx6q-wandboard.dtb \
|
||||
imx6q-wandboard-revb1.dtb \
|
||||
imx6q-tx6q-1010.dtb \
|
||||
imx6q-tx6q-1010-comtft.dtb \
|
||||
imx6q-tx6q-1020.dtb \
|
||||
|
|
22
arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
Normal file
22
arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
Normal file
|
@ -0,0 +1,22 @@
|
|||
/*
|
||||
* Copyright 2013 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* Author: Fabio Estevam <fabio.estevam@freescale.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
/dts-v1/;
|
||||
#include "imx6dl.dtsi"
|
||||
#include "imx6qdl-wandboard-revb1.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Wandboard i.MX6 Dual Lite Board";
|
||||
compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
|
||||
|
||||
memory {
|
||||
reg = <0x10000000 0x40000000>;
|
||||
};
|
||||
};
|
|
@ -10,7 +10,7 @@
|
|||
*/
|
||||
/dts-v1/;
|
||||
#include "imx6dl.dtsi"
|
||||
#include "imx6qdl-wandboard.dtsi"
|
||||
#include "imx6qdl-wandboard-revc1.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Wandboard i.MX6 Dual Lite Board";
|
||||
|
|
26
arch/arm/boot/dts/imx6q-wandboard-revb1.dts
Normal file
26
arch/arm/boot/dts/imx6q-wandboard-revb1.dts
Normal file
|
@ -0,0 +1,26 @@
|
|||
/*
|
||||
* Copyright 2013 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* Author: Fabio Estevam <fabio.estevam@freescale.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
/dts-v1/;
|
||||
#include "imx6q.dtsi"
|
||||
#include "imx6qdl-wandboard-revb1.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Wandboard i.MX6 Quad Board";
|
||||
compatible = "wand,imx6q-wandboard", "fsl,imx6q";
|
||||
|
||||
memory {
|
||||
reg = <0x10000000 0x80000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
|
@ -10,7 +10,7 @@
|
|||
*/
|
||||
/dts-v1/;
|
||||
#include "imx6q.dtsi"
|
||||
#include "imx6qdl-wandboard.dtsi"
|
||||
#include "imx6qdl-wandboard-revc1.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Wandboard i.MX6 Quad Board";
|
||||
|
|
42
arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
Normal file
42
arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi
Normal file
|
@ -0,0 +1,42 @@
|
|||
/*
|
||||
* Copyright 2013 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* Author: Fabio Estevam <fabio.estevam@freescale.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
#include "imx6qdl-wandboard.dtsi"
|
||||
|
||||
&iomuxc {
|
||||
pinctrl-0 = <&pinctrl_hog>;
|
||||
|
||||
imx6qdl-wandboard {
|
||||
pinctrl_hog: hoggrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* GPIO_0_CLKO */
|
||||
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* uSDHC1 CD */
|
||||
MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */
|
||||
MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x0f0b0 /* WL_REF_ON */
|
||||
MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x0f0b0 /* WL_RST_N */
|
||||
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x000b0 /* WL_REG_ON */
|
||||
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */
|
||||
MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */
|
||||
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 /* RGMII_nRST */
|
||||
MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x80000000 /* BT_ON */
|
||||
MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x80000000 /* BT_WAKE */
|
||||
MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x80000000 /* BT_HOST_WAKE */
|
||||
>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usdhc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc2>;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
41
arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi
Normal file
41
arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi
Normal file
|
@ -0,0 +1,41 @@
|
|||
/*
|
||||
* Copyright 2013 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* Author: Fabio Estevam <fabio.estevam@freescale.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
#include "imx6qdl-wandboard.dtsi"
|
||||
|
||||
&iomuxc {
|
||||
pinctrl-0 = <&pinctrl_hog>;
|
||||
|
||||
imx6qdl-wandboard {
|
||||
pinctrl_hog: hoggrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* GPIO_0_CLKO */
|
||||
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* uSDHC1 CD */
|
||||
MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */
|
||||
MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x0f0b0 /* WIFI_ON (reset, active low) */
|
||||
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x000b0 /* WL_REG_ON (unused) */
|
||||
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE, input */
|
||||
MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x0f0b0 /* GPIO5_IO31 (Wifi Power Enable) */
|
||||
MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE (unused) */
|
||||
MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x80000000 /* BT_ON */
|
||||
MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x80000000 /* BT_WAKE */
|
||||
MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x80000000 /* BT_HOST_WAKE */
|
||||
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 /* RGMII_nRST */
|
||||
>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usdhc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc2>;
|
||||
status = "okay";
|
||||
};
|
|
@ -91,22 +91,8 @@
|
|||
|
||||
&iomuxc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_hog>;
|
||||
|
||||
imx6qdl-wandboard {
|
||||
pinctrl_hog: hoggrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
|
||||
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
|
||||
MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000
|
||||
MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x80000000 /* WL_REF_ON */
|
||||
MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000 /* WL_RST_N */
|
||||
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* WL_REG_ON */
|
||||
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */
|
||||
MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */
|
||||
MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_audmux: audmuxgrp {
|
||||
fsl,pins = <
|
||||
|
@ -268,13 +254,6 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc2>;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc3>;
|
||||
|
|
Loading…
Reference in a new issue