ARM: dts: imx6: add support for the Ka-Ro electronics 'MB7' baseboard
This baseboard can be used with all TX6 SoMs, but only a certain set of combinations can be ordered by default. Add support for these combinations in mainline, so that users can easily adopt their own combination of SoM and baseboard themselves. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
parent
168e046136
commit
8630743bbe
|
@ -325,6 +325,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
|
|||
imx6dl-tx6u-801x.dtb \
|
||||
imx6dl-tx6u-8033.dtb \
|
||||
imx6dl-tx6u-811x.dtb \
|
||||
imx6dl-tx6u-81xx-mb7.dtb \
|
||||
imx6dl-udoo.dtb \
|
||||
imx6dl-wandboard.dtb \
|
||||
imx6dl-wandboard-revb1.dtb \
|
||||
|
@ -365,6 +366,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
|
|||
imx6q-tx6q-1020-comtft.dtb \
|
||||
imx6q-tx6q-1036.dtb \
|
||||
imx6q-tx6q-1110.dtb \
|
||||
imx6q-tx6q-11x0-mb7.dtb \
|
||||
imx6q-udoo.dtb \
|
||||
imx6q-wandboard.dtb \
|
||||
imx6q-wandboard-revb1.dtb \
|
||||
|
|
255
arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
Normal file
255
arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
Normal file
|
@ -0,0 +1,255 @@
|
|||
/*
|
||||
* Copyright 2016 Lothar Waßmann <LW@KARO-electronics.de>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "imx6dl.dtsi"
|
||||
#include "imx6qdl-tx6.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Ka-Ro electronics TX6U-81xx Module on MB7 baseboard";
|
||||
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
|
||||
|
||||
aliases {
|
||||
display = &lvds0;
|
||||
lvds0 = &lvds0;
|
||||
lvds1 = &lvds1;
|
||||
};
|
||||
|
||||
backlight0: backlight0 {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
|
||||
power-supply = <®_lcd0_pwr>;
|
||||
/*
|
||||
* a poor man's way to create a 1:1 relationship between
|
||||
* the PWM value and the actual duty cycle
|
||||
*/
|
||||
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
|
||||
10 11 12 13 14 15 16 17 18 19
|
||||
20 21 22 23 24 25 26 27 28 29
|
||||
30 31 32 33 34 35 36 37 38 39
|
||||
40 41 42 43 44 45 46 47 48 49
|
||||
50 51 52 53 54 55 56 57 58 59
|
||||
60 61 62 63 64 65 66 67 68 69
|
||||
70 71 72 73 74 75 76 77 78 79
|
||||
80 81 82 83 84 85 86 87 88 89
|
||||
90 91 92 93 94 95 96 97 98 99
|
||||
100>;
|
||||
default-brightness-level = <50>;
|
||||
};
|
||||
|
||||
backlight1: backlight1 {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
|
||||
power-supply = <®_lcd1_pwr>;
|
||||
/*
|
||||
* a poor man's way to create a 1:1 relationship between
|
||||
* the PWM value and the actual duty cycle
|
||||
*/
|
||||
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
|
||||
10 11 12 13 14 15 16 17 18 19
|
||||
20 21 22 23 24 25 26 27 28 29
|
||||
30 31 32 33 34 35 36 37 38 39
|
||||
40 41 42 43 44 45 46 47 48 49
|
||||
50 51 52 53 54 55 56 57 58 59
|
||||
60 61 62 63 64 65 66 67 68 69
|
||||
70 71 72 73 74 75 76 77 78 79
|
||||
80 81 82 83 84 85 86 87 88 89
|
||||
90 91 92 93 94 95 96 97 98 99
|
||||
100>;
|
||||
default-brightness-level = <50>;
|
||||
};
|
||||
};
|
||||
|
||||
&can1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&can2 {
|
||||
xceiver-supply = <®_3v3>;
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
polytouch1: eeti@04 {
|
||||
compatible = "eeti,egalax_ts";
|
||||
reg = <0x04>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_eeti>;
|
||||
interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>;
|
||||
wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&kpp {
|
||||
status = "disabled"; /* pads partially clash with backlight1 PWM */
|
||||
};
|
||||
|
||||
&ldb {
|
||||
status = "okay";
|
||||
|
||||
lvds0: lvds-channel@0 {
|
||||
fsl,data-mapping = "spwg";
|
||||
fsl,data-width = <18>;
|
||||
status = "okay";
|
||||
|
||||
display-timings {
|
||||
native-mode = <&lvds0_timing1>;
|
||||
|
||||
lvds0_timing0: hsd100pxn1 {
|
||||
clock-frequency = <65000000>;
|
||||
hactive = <1024>;
|
||||
vactive = <768>;
|
||||
hback-porch = <220>;
|
||||
hfront-porch = <40>;
|
||||
vback-porch = <21>;
|
||||
vfront-porch = <7>;
|
||||
hsync-len = <60>;
|
||||
vsync-len = <10>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <1>;
|
||||
};
|
||||
|
||||
lvds0_timing1: VGA {
|
||||
clock-frequency = <25200000>;
|
||||
hactive = <640>;
|
||||
vactive = <480>;
|
||||
hback-porch = <48>;
|
||||
hfront-porch = <16>;
|
||||
vback-porch = <31>;
|
||||
vfront-porch = <12>;
|
||||
hsync-len = <96>;
|
||||
vsync-len = <2>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <0>;
|
||||
};
|
||||
|
||||
lvds0_timing2: nl12880bc20 {
|
||||
clock-frequency = <71000000>;
|
||||
hactive = <1280>;
|
||||
vactive = <800>;
|
||||
hback-porch = <50>;
|
||||
hfront-porch = <50>;
|
||||
vback-porch = <5>;
|
||||
vfront-porch = <5>;
|
||||
hsync-len = <60>;
|
||||
vsync-len = <13>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
lvds1: lvds-channel@1 {
|
||||
fsl,data-mapping = "spwg";
|
||||
fsl,data-width = <18>;
|
||||
status = "okay";
|
||||
|
||||
display-timings {
|
||||
native-mode = <&lvds1_timing2>;
|
||||
|
||||
lvds1_timing0: hsd100pxn1 {
|
||||
clock-frequency = <65000000>;
|
||||
hactive = <1024>;
|
||||
vactive = <768>;
|
||||
hback-porch = <220>;
|
||||
hfront-porch = <40>;
|
||||
vback-porch = <21>;
|
||||
vfront-porch = <7>;
|
||||
hsync-len = <60>;
|
||||
vsync-len = <10>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <1>;
|
||||
};
|
||||
|
||||
lvds1_timing1: VGA {
|
||||
clock-frequency = <25200000>;
|
||||
hactive = <640>;
|
||||
vactive = <480>;
|
||||
hback-porch = <48>;
|
||||
hfront-porch = <16>;
|
||||
vback-porch = <31>;
|
||||
vfront-porch = <12>;
|
||||
hsync-len = <96>;
|
||||
vsync-len = <2>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <0>;
|
||||
};
|
||||
|
||||
lvds1_timing2: nl12880bc20 {
|
||||
clock-frequency = <71000000>;
|
||||
hactive = <1280>;
|
||||
vactive = <800>;
|
||||
hback-porch = <50>;
|
||||
hfront-porch = <50>;
|
||||
vback-porch = <5>;
|
||||
vfront-porch = <5>;
|
||||
hsync-len = <60>;
|
||||
vsync-len = <13>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl_eeti: eetigrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
|
||||
>;
|
||||
};
|
||||
};
|
264
arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
Normal file
264
arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
Normal file
|
@ -0,0 +1,264 @@
|
|||
/*
|
||||
* Copyright 2016 Lothar Waßmann <LW@KARO-electronics.de>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "imx6q.dtsi"
|
||||
#include "imx6qdl-tx6.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Ka-Ro electronics TX6Q-1110/-1130 Module on MB7 baseboard";
|
||||
compatible = "karo,imx6q-tx6q", "fsl,imx6q";
|
||||
|
||||
aliases {
|
||||
display = &lvds0;
|
||||
ipu1 = &ipu2;
|
||||
lvds0 = &lvds0;
|
||||
lvds1 = &lvds1;
|
||||
};
|
||||
|
||||
backlight0: backlight0 {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
|
||||
power-supply = <®_lcd0_pwr>;
|
||||
/*
|
||||
* a poor man's way to create a 1:1 relationship between
|
||||
* the PWM value and the actual duty cycle
|
||||
*/
|
||||
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
|
||||
10 11 12 13 14 15 16 17 18 19
|
||||
20 21 22 23 24 25 26 27 28 29
|
||||
30 31 32 33 34 35 36 37 38 39
|
||||
40 41 42 43 44 45 46 47 48 49
|
||||
50 51 52 53 54 55 56 57 58 59
|
||||
60 61 62 63 64 65 66 67 68 69
|
||||
70 71 72 73 74 75 76 77 78 79
|
||||
80 81 82 83 84 85 86 87 88 89
|
||||
90 91 92 93 94 95 96 97 98 99
|
||||
100>;
|
||||
default-brightness-level = <50>;
|
||||
};
|
||||
|
||||
backlight1: backlight1 {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
|
||||
power-supply = <®_lcd1_pwr>;
|
||||
/*
|
||||
* a poor man's way to create a 1:1 relationship between
|
||||
* the PWM value and the actual duty cycle
|
||||
*/
|
||||
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
|
||||
10 11 12 13 14 15 16 17 18 19
|
||||
20 21 22 23 24 25 26 27 28 29
|
||||
30 31 32 33 34 35 36 37 38 39
|
||||
40 41 42 43 44 45 46 47 48 49
|
||||
50 51 52 53 54 55 56 57 58 59
|
||||
60 61 62 63 64 65 66 67 68 69
|
||||
70 71 72 73 74 75 76 77 78 79
|
||||
80 81 82 83 84 85 86 87 88 89
|
||||
90 91 92 93 94 95 96 97 98 99
|
||||
100>;
|
||||
default-brightness-level = <50>;
|
||||
};
|
||||
};
|
||||
|
||||
&can1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&can2 {
|
||||
xceiver-supply = <®_3v3>;
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
polytouch1: eeti@04 {
|
||||
compatible = "eeti,egalax_ts";
|
||||
reg = <0x04>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_eeti>;
|
||||
interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>;
|
||||
wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&ipu2 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&kpp {
|
||||
status = "disabled"; /* pads partially clash with backlight1 PWM */
|
||||
};
|
||||
|
||||
&ldb {
|
||||
status = "okay";
|
||||
|
||||
lvds0: lvds-channel@0 {
|
||||
fsl,data-mapping = "spwg";
|
||||
fsl,data-width = <18>;
|
||||
status = "okay";
|
||||
|
||||
display-timings {
|
||||
native-mode = <&lvds0_timing1>;
|
||||
|
||||
lvds0_timing0: hsd100pxn1 {
|
||||
clock-frequency = <65000000>;
|
||||
hactive = <1024>;
|
||||
vactive = <768>;
|
||||
hback-porch = <220>;
|
||||
hfront-porch = <40>;
|
||||
vback-porch = <21>;
|
||||
vfront-porch = <7>;
|
||||
hsync-len = <60>;
|
||||
vsync-len = <10>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <1>;
|
||||
};
|
||||
|
||||
lvds0_timing1: VGA {
|
||||
clock-frequency = <25200000>;
|
||||
hactive = <640>;
|
||||
vactive = <480>;
|
||||
hback-porch = <48>;
|
||||
hfront-porch = <16>;
|
||||
vback-porch = <31>;
|
||||
vfront-porch = <12>;
|
||||
hsync-len = <96>;
|
||||
vsync-len = <2>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <0>;
|
||||
};
|
||||
|
||||
lvds0_timing2: nl12880bc20 {
|
||||
clock-frequency = <71000000>;
|
||||
hactive = <1280>;
|
||||
vactive = <800>;
|
||||
hback-porch = <50>;
|
||||
hfront-porch = <50>;
|
||||
vback-porch = <5>;
|
||||
vfront-porch = <5>;
|
||||
hsync-len = <60>;
|
||||
vsync-len = <13>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
lvds1: lvds-channel@1 {
|
||||
fsl,data-mapping = "spwg";
|
||||
fsl,data-width = <18>;
|
||||
status = "okay";
|
||||
|
||||
display-timings {
|
||||
native-mode = <&lvds1_timing2>;
|
||||
|
||||
lvds1_timing0: hsd100pxn1 {
|
||||
clock-frequency = <65000000>;
|
||||
hactive = <1024>;
|
||||
vactive = <768>;
|
||||
hback-porch = <220>;
|
||||
hfront-porch = <40>;
|
||||
vback-porch = <21>;
|
||||
vfront-porch = <7>;
|
||||
hsync-len = <60>;
|
||||
vsync-len = <10>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <1>;
|
||||
};
|
||||
|
||||
lvds1_timing1: VGA {
|
||||
clock-frequency = <25200000>;
|
||||
hactive = <640>;
|
||||
vactive = <480>;
|
||||
hback-porch = <48>;
|
||||
hfront-porch = <16>;
|
||||
vback-porch = <31>;
|
||||
vfront-porch = <12>;
|
||||
hsync-len = <96>;
|
||||
vsync-len = <2>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <0>;
|
||||
};
|
||||
|
||||
lvds1_timing2: nl12880bc20 {
|
||||
clock-frequency = <71000000>;
|
||||
hactive = <1280>;
|
||||
vactive = <800>;
|
||||
hback-porch = <50>;
|
||||
hfront-porch = <50>;
|
||||
vback-porch = <5>;
|
||||
vfront-porch = <5>;
|
||||
hsync-len = <60>;
|
||||
vsync-len = <13>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl_eeti: eetigrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
|
||||
>;
|
||||
};
|
||||
};
|
Loading…
Reference in a new issue