ARM: dts: OMAP5 / DRA7: indicate that SATA port 0 is available.
AHCI provides the register PORTS_IMPL to let the software know which port is supported. The register must be initialized by the bootloader. However in some cases u-boot doesn't properly initialize this value (if it is not compiled with SATA support for example or if the SATA initialization fails). The DTS entry "ports-implemented" can be used to override the value in PORTS_IMPL. Without this patch the SATA will not work in the following two cases: * if there has been a failure to initialize SATA in u-boot. * if ahci_platform module has been removed and re-inserted. The reason is that the content of PORTS_IMPL is lost after the module is removed. I suspect that it's because the controller is reset by the hwmod. Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> [tony@atomide.com: updated comments with what goes wrong] Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
parent
8e2329ead7
commit
87cb12910a
|
@ -1378,6 +1378,7 @@
|
|||
phy-names = "sata-phy";
|
||||
clocks = <&sata_ref_clk>;
|
||||
ti,hwmods = "sata";
|
||||
ports-implemented = <0x1>;
|
||||
};
|
||||
|
||||
rtc: rtc@48838000 {
|
||||
|
|
|
@ -988,6 +988,7 @@
|
|||
phy-names = "sata-phy";
|
||||
clocks = <&sata_ref_clk>;
|
||||
ti,hwmods = "sata";
|
||||
ports-implemented = <0x1>;
|
||||
};
|
||||
|
||||
dss: dss@58000000 {
|
||||
|
|
Loading…
Reference in a new issue