[SCSI] lpfc 8.3.25: Miscellaneous Bug fixes and code cleanup
Miscellaneous Bug fixes and code cleanup - Fix 16G link speed reporting by adding check for 16G check. - Change the check and enforcement of MAILBOX_EXT_SIZE (2048B) to the check and enforcement of BSG_MBOX_SIZE - sizeof(MAILBOX_t) (3840B). - Instead of waiting for a fixed amount of time after performing firmware reset, the driver shall wait for the Lancer SLIPORT_STATUS register for the readiness of the firmware for bring up. - Add logging to indicate when dynamic parameters are changed. - Add revision and date to the firmware image format. - Use revision instead of rev_name to check firmware image version. - Update temporary offset after memcopy is complete for firmware update. - Consolidated the use of the macros to get rid of duplicated register offset definitions. - Removed the unused second parameter in routine lpfc_bsg_diag_mode_enter() - Enable debugfs when debugfs is enabled. - Update function comments for lpfc_sli4_alloc_xri and lpfc_sli4_init_rpi_hdrs. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
This commit is contained in:
James Smart
James Bottomley
parent
7c56b9fd3b
commit
88a2cfbb8b
|
|
@ -20,6 +20,11 @@
|
|||
*******************************************************************/
|
||||
|
||||
#include <scsi/scsi_host.h>
|
||||
|
||||
#if defined(CONFIG_DEBUG_FS) && !defined(CONFIG_SCSI_LPFC_DEBUG_FS)
|
||||
#define CONFIG_SCSI_LPFC_DEBUG_FS
|
||||
#endif
|
||||
|
||||
struct lpfc_sli2_slim;
|
||||
|
||||
#define LPFC_PCI_DEV_LP 0x1
|
||||
|
|
|
|||
|
|
@ -754,6 +754,47 @@ lpfc_issue_reset(struct device *dev, struct device_attribute *attr,
|
|||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* lpfc_sli4_pdev_status_reg_wait - Wait for pdev status register for readyness
|
||||
* @phba: lpfc_hba pointer.
|
||||
*
|
||||
* Description:
|
||||
* SLI4 interface type-2 device to wait on the sliport status register for
|
||||
* the readyness after performing a firmware reset.
|
||||
*
|
||||
* Returns:
|
||||
* zero for success
|
||||
**/
|
||||
static int
|
||||
lpfc_sli4_pdev_status_reg_wait(struct lpfc_hba *phba)
|
||||
{
|
||||
struct lpfc_register portstat_reg;
|
||||
int i;
|
||||
|
||||
|
||||
lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
|
||||
&portstat_reg.word0);
|
||||
|
||||
/* wait for the SLI port firmware ready after firmware reset */
|
||||
for (i = 0; i < LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT; i++) {
|
||||
msleep(10);
|
||||
lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
|
||||
&portstat_reg.word0);
|
||||
if (!bf_get(lpfc_sliport_status_err, &portstat_reg))
|
||||
continue;
|
||||
if (!bf_get(lpfc_sliport_status_rn, &portstat_reg))
|
||||
continue;
|
||||
if (!bf_get(lpfc_sliport_status_rdy, &portstat_reg))
|
||||
continue;
|
||||
break;
|
||||
}
|
||||
|
||||
if (i < LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT)
|
||||
return 0;
|
||||
else
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
/**
|
||||
* lpfc_sli4_pdev_reg_request - Request physical dev to perform a register acc
|
||||
* @phba: lpfc_hba pointer.
|
||||
|
|
@ -805,7 +846,10 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode)
|
|||
readl(phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET);
|
||||
|
||||
/* delay driver action following IF_TYPE_2 reset */
|
||||
msleep(100);
|
||||
rc = lpfc_sli4_pdev_status_reg_wait(phba);
|
||||
|
||||
if (rc)
|
||||
return -EIO;
|
||||
|
||||
init_completion(&online_compl);
|
||||
rc = lpfc_workq_post_event(phba, &status, &online_compl,
|
||||
|
|
@ -895,6 +939,10 @@ lpfc_board_mode_store(struct device *dev, struct device_attribute *attr,
|
|||
|
||||
if (!phba->cfg_enable_hba_reset)
|
||||
return -EACCES;
|
||||
|
||||
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
|
||||
"3050 lpfc_board_mode set to %s\n", buf);
|
||||
|
||||
init_completion(&online_compl);
|
||||
|
||||
if(strncmp(buf, "online", sizeof("online") - 1) == 0) {
|
||||
|
|
@ -1290,6 +1338,10 @@ lpfc_poll_store(struct device *dev, struct device_attribute *attr,
|
|||
if (phba->sli_rev == LPFC_SLI_REV4)
|
||||
val = 0;
|
||||
|
||||
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
|
||||
"3051 lpfc_poll changed from %d to %d\n",
|
||||
phba->cfg_poll, val);
|
||||
|
||||
spin_lock_irq(&phba->hbalock);
|
||||
|
||||
old_val = phba->cfg_poll;
|
||||
|
|
@ -1605,6 +1657,9 @@ static int \
|
|||
lpfc_##attr##_set(struct lpfc_hba *phba, uint val) \
|
||||
{ \
|
||||
if (val >= minval && val <= maxval) {\
|
||||
lpfc_printf_log(phba, KERN_ERR, LOG_INIT, \
|
||||
"3052 lpfc_" #attr " changed from %d to %d\n", \
|
||||
phba->cfg_##attr, val); \
|
||||
phba->cfg_##attr = val;\
|
||||
return 0;\
|
||||
}\
|
||||
|
|
@ -1762,6 +1817,9 @@ static int \
|
|||
lpfc_##attr##_set(struct lpfc_vport *vport, uint val) \
|
||||
{ \
|
||||
if (val >= minval && val <= maxval) {\
|
||||
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \
|
||||
"3053 lpfc_" #attr " changed from %d to %d\n", \
|
||||
vport->cfg_##attr, val); \
|
||||
vport->cfg_##attr = val;\
|
||||
return 0;\
|
||||
}\
|
||||
|
|
@ -2678,6 +2736,9 @@ lpfc_topology_store(struct device *dev, struct device_attribute *attr,
|
|||
if (nolip)
|
||||
return strlen(buf);
|
||||
|
||||
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
|
||||
"3054 lpfc_topology changed from %d to %d\n",
|
||||
prev_val, val);
|
||||
err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));
|
||||
if (err) {
|
||||
phba->cfg_topology = prev_val;
|
||||
|
|
@ -3101,6 +3162,10 @@ lpfc_link_speed_store(struct device *dev, struct device_attribute *attr,
|
|||
if (sscanf(val_buf, "%i", &val) != 1)
|
||||
return -EINVAL;
|
||||
|
||||
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
|
||||
"3055 lpfc_link_speed changed from %d to %d %s\n",
|
||||
phba->cfg_link_speed, val, nolip ? "(nolip)" : "(lip)");
|
||||
|
||||
if (((val == LPFC_USER_LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) ||
|
||||
((val == LPFC_USER_LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) ||
|
||||
((val == LPFC_USER_LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) ||
|
||||
|
|
|
|||
|
|
@ -1471,13 +1471,12 @@ send_mgmt_rsp_exit:
|
|||
/**
|
||||
* lpfc_bsg_diag_mode_enter - process preparing into device diag loopback mode
|
||||
* @phba: Pointer to HBA context object.
|
||||
* @job: LPFC_BSG_VENDOR_DIAG_MODE
|
||||
*
|
||||
* This function is responsible for preparing driver for diag loopback
|
||||
* on device.
|
||||
*/
|
||||
static int
|
||||
lpfc_bsg_diag_mode_enter(struct lpfc_hba *phba, struct fc_bsg_job *job)
|
||||
lpfc_bsg_diag_mode_enter(struct lpfc_hba *phba)
|
||||
{
|
||||
struct lpfc_vport **vports;
|
||||
struct Scsi_Host *shost;
|
||||
|
|
@ -1521,7 +1520,6 @@ lpfc_bsg_diag_mode_enter(struct lpfc_hba *phba, struct fc_bsg_job *job)
|
|||
/**
|
||||
* lpfc_bsg_diag_mode_exit - exit process from device diag loopback mode
|
||||
* @phba: Pointer to HBA context object.
|
||||
* @job: LPFC_BSG_VENDOR_DIAG_MODE
|
||||
*
|
||||
* This function is responsible for driver exit processing of setting up
|
||||
* diag loopback mode on device.
|
||||
|
|
@ -1586,7 +1584,7 @@ lpfc_sli3_bsg_diag_loopback_mode(struct lpfc_hba *phba, struct fc_bsg_job *job)
|
|||
goto job_error;
|
||||
}
|
||||
|
||||
rc = lpfc_bsg_diag_mode_enter(phba, job);
|
||||
rc = lpfc_bsg_diag_mode_enter(phba);
|
||||
if (rc)
|
||||
goto job_error;
|
||||
|
||||
|
|
@ -1758,7 +1756,7 @@ lpfc_sli4_bsg_diag_loopback_mode(struct lpfc_hba *phba, struct fc_bsg_job *job)
|
|||
goto job_error;
|
||||
}
|
||||
|
||||
rc = lpfc_bsg_diag_mode_enter(phba, job);
|
||||
rc = lpfc_bsg_diag_mode_enter(phba);
|
||||
if (rc)
|
||||
goto job_error;
|
||||
|
||||
|
|
@ -1982,7 +1980,7 @@ lpfc_sli4_bsg_link_diag_test(struct fc_bsg_job *job)
|
|||
goto job_error;
|
||||
}
|
||||
|
||||
rc = lpfc_bsg_diag_mode_enter(phba, job);
|
||||
rc = lpfc_bsg_diag_mode_enter(phba);
|
||||
if (rc)
|
||||
goto job_error;
|
||||
|
||||
|
|
@ -3511,7 +3509,7 @@ lpfc_bsg_sli_cfg_read_cmd_ext(struct lpfc_hba *phba, struct fc_bsg_job *job,
|
|||
lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
|
||||
"2947 Issued SLI_CONFIG ext-buffer "
|
||||
"maibox command, rc:x%x\n", rc);
|
||||
return 1;
|
||||
return SLI_CONFIG_HANDLED;
|
||||
}
|
||||
lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC,
|
||||
"2948 Failed to issue SLI_CONFIG ext-buffer "
|
||||
|
|
@ -3549,7 +3547,7 @@ lpfc_bsg_sli_cfg_write_cmd_ext(struct lpfc_hba *phba, struct fc_bsg_job *job,
|
|||
LPFC_MBOXQ_t *pmboxq = NULL;
|
||||
MAILBOX_t *pmb;
|
||||
uint8_t *mbx;
|
||||
int rc = 0, i;
|
||||
int rc = SLI_CONFIG_NOT_HANDLED, i;
|
||||
|
||||
mbox_req =
|
||||
(struct dfc_mbox_req *)job->request->rqst_data.h_vendor.vendor_cmd;
|
||||
|
|
@ -3660,7 +3658,7 @@ lpfc_bsg_sli_cfg_write_cmd_ext(struct lpfc_hba *phba, struct fc_bsg_job *job,
|
|||
lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
|
||||
"2955 Issued SLI_CONFIG ext-buffer "
|
||||
"maibox command, rc:x%x\n", rc);
|
||||
return 1;
|
||||
return SLI_CONFIG_HANDLED;
|
||||
}
|
||||
lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC,
|
||||
"2956 Failed to issue SLI_CONFIG ext-buffer "
|
||||
|
|
@ -3668,6 +3666,11 @@ lpfc_bsg_sli_cfg_write_cmd_ext(struct lpfc_hba *phba, struct fc_bsg_job *job,
|
|||
rc = -EPIPE;
|
||||
}
|
||||
|
||||
/* wait for additoinal external buffers */
|
||||
job->reply->result = 0;
|
||||
job->job_done(job);
|
||||
return SLI_CONFIG_HANDLED;
|
||||
|
||||
job_error:
|
||||
if (pmboxq)
|
||||
mempool_free(pmboxq, phba->mbox_mem_pool);
|
||||
|
|
@ -3959,7 +3962,7 @@ lpfc_bsg_write_ebuf_set(struct lpfc_hba *phba, struct fc_bsg_job *job,
|
|||
lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC,
|
||||
"2969 Issued SLI_CONFIG ext-buffer "
|
||||
"maibox command, rc:x%x\n", rc);
|
||||
return 1;
|
||||
return SLI_CONFIG_HANDLED;
|
||||
}
|
||||
lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC,
|
||||
"2970 Failed to issue SLI_CONFIG ext-buffer "
|
||||
|
|
@ -4039,14 +4042,14 @@ lpfc_bsg_handle_sli_cfg_ext(struct lpfc_hba *phba, struct fc_bsg_job *job,
|
|||
struct lpfc_dmabuf *dmabuf)
|
||||
{
|
||||
struct dfc_mbox_req *mbox_req;
|
||||
int rc;
|
||||
int rc = SLI_CONFIG_NOT_HANDLED;
|
||||
|
||||
mbox_req =
|
||||
(struct dfc_mbox_req *)job->request->rqst_data.h_vendor.vendor_cmd;
|
||||
|
||||
/* mbox command with/without single external buffer */
|
||||
if (mbox_req->extMboxTag == 0 && mbox_req->extSeqNum == 0)
|
||||
return SLI_CONFIG_NOT_HANDLED;
|
||||
return rc;
|
||||
|
||||
/* mbox command and first external buffer */
|
||||
if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_IDLE) {
|
||||
|
|
@ -4249,7 +4252,7 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
|
|||
* mailbox extension size
|
||||
*/
|
||||
if ((transmit_length > receive_length) ||
|
||||
(transmit_length > MAILBOX_EXT_SIZE)) {
|
||||
(transmit_length > BSG_MBOX_SIZE - sizeof(MAILBOX_t))) {
|
||||
rc = -ERANGE;
|
||||
goto job_done;
|
||||
}
|
||||
|
|
@ -4272,7 +4275,7 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
|
|||
/* receive length cannot be greater than mailbox
|
||||
* extension size
|
||||
*/
|
||||
if (receive_length > MAILBOX_EXT_SIZE) {
|
||||
if (receive_length > BSG_MBOX_SIZE - sizeof(MAILBOX_t)) {
|
||||
rc = -ERANGE;
|
||||
goto job_done;
|
||||
}
|
||||
|
|
@ -4306,7 +4309,8 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
|
|||
bde = (struct ulp_bde64 *)&pmb->un.varWords[4];
|
||||
|
||||
/* bde size cannot be greater than mailbox ext size */
|
||||
if (bde->tus.f.bdeSize > MAILBOX_EXT_SIZE) {
|
||||
if (bde->tus.f.bdeSize >
|
||||
BSG_MBOX_SIZE - sizeof(MAILBOX_t)) {
|
||||
rc = -ERANGE;
|
||||
goto job_done;
|
||||
}
|
||||
|
|
@ -4332,7 +4336,8 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
|
|||
* mailbox extension size
|
||||
*/
|
||||
if ((receive_length == 0) ||
|
||||
(receive_length > MAILBOX_EXT_SIZE)) {
|
||||
(receive_length >
|
||||
BSG_MBOX_SIZE - sizeof(MAILBOX_t))) {
|
||||
rc = -ERANGE;
|
||||
goto job_done;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -170,15 +170,8 @@ struct lpfc_sli_intf {
|
|||
#define LPFC_PCI_FUNC3 3
|
||||
#define LPFC_PCI_FUNC4 4
|
||||
|
||||
/* SLI4 interface type-2 control register offsets */
|
||||
#define LPFC_CTL_PORT_SEM_OFFSET 0x400
|
||||
#define LPFC_CTL_PORT_STA_OFFSET 0x404
|
||||
#define LPFC_CTL_PORT_CTL_OFFSET 0x408
|
||||
#define LPFC_CTL_PORT_ER1_OFFSET 0x40C
|
||||
#define LPFC_CTL_PORT_ER2_OFFSET 0x410
|
||||
/* SLI4 interface type-2 PDEV_CTL register */
|
||||
#define LPFC_CTL_PDEV_CTL_OFFSET 0x414
|
||||
|
||||
/* Some SLI4 interface type-2 PDEV_CTL register bits */
|
||||
#define LPFC_CTL_PDEV_CTL_DRST 0x00000001
|
||||
#define LPFC_CTL_PDEV_CTL_FRST 0x00000002
|
||||
#define LPFC_CTL_PDEV_CTL_DD 0x00000004
|
||||
|
|
@ -515,7 +508,7 @@ struct lpfc_register {
|
|||
/* The following BAR0 register sets are defined for if_type 0 and 2 UCNAs. */
|
||||
#define LPFC_SLI_INTF 0x0058
|
||||
|
||||
#define LPFC_SLIPORT_IF2_SMPHR 0x0400
|
||||
#define LPFC_CTL_PORT_SEM_OFFSET 0x400
|
||||
#define lpfc_port_smphr_perr_SHIFT 31
|
||||
#define lpfc_port_smphr_perr_MASK 0x1
|
||||
#define lpfc_port_smphr_perr_WORD word0
|
||||
|
|
@ -575,7 +568,7 @@ struct lpfc_register {
|
|||
#define LPFC_POST_STAGE_PORT_READY 0xC000
|
||||
#define LPFC_POST_STAGE_PORT_UE 0xF000
|
||||
|
||||
#define LPFC_SLIPORT_STATUS 0x0404
|
||||
#define LPFC_CTL_PORT_STA_OFFSET 0x404
|
||||
#define lpfc_sliport_status_err_SHIFT 31
|
||||
#define lpfc_sliport_status_err_MASK 0x1
|
||||
#define lpfc_sliport_status_err_WORD word0
|
||||
|
|
@ -593,7 +586,7 @@ struct lpfc_register {
|
|||
#define lpfc_sliport_status_rdy_WORD word0
|
||||
#define MAX_IF_TYPE_2_RESETS 1000
|
||||
|
||||
#define LPFC_SLIPORT_CNTRL 0x0408
|
||||
#define LPFC_CTL_PORT_CTL_OFFSET 0x408
|
||||
#define lpfc_sliport_ctrl_end_SHIFT 30
|
||||
#define lpfc_sliport_ctrl_end_MASK 0x1
|
||||
#define lpfc_sliport_ctrl_end_WORD word0
|
||||
|
|
@ -604,8 +597,8 @@ struct lpfc_register {
|
|||
#define lpfc_sliport_ctrl_ip_WORD word0
|
||||
#define LPFC_SLIPORT_INIT_PORT 1
|
||||
|
||||
#define LPFC_SLIPORT_ERR_1 0x040C
|
||||
#define LPFC_SLIPORT_ERR_2 0x0410
|
||||
#define LPFC_CTL_PORT_ER1_OFFSET 0x40C
|
||||
#define LPFC_CTL_PORT_ER2_OFFSET 0x410
|
||||
|
||||
/* The following Registers apply to SLI4 if_type 0 UCNAs. They typically
|
||||
* reside in BAR 2.
|
||||
|
|
@ -3198,6 +3191,8 @@ struct lpfc_grp_hdr {
|
|||
#define lpfc_grp_hdr_id_MASK 0x000000FF
|
||||
#define lpfc_grp_hdr_id_WORD word2
|
||||
uint8_t rev_name[128];
|
||||
uint8_t date[12];
|
||||
uint8_t revision[32];
|
||||
};
|
||||
|
||||
#define FCP_COMMAND 0x0
|
||||
|
|
|
|||
|
|
@ -2927,6 +2927,8 @@ void lpfc_host_attrib_init(struct Scsi_Host *shost)
|
|||
sizeof fc_host_symbolic_name(shost));
|
||||
|
||||
fc_host_supported_speeds(shost) = 0;
|
||||
if (phba->lmt & LMT_16Gb)
|
||||
fc_host_supported_speeds(shost) |= FC_PORTSPEED_16GBIT;
|
||||
if (phba->lmt & LMT_10Gb)
|
||||
fc_host_supported_speeds(shost) |= FC_PORTSPEED_10GBIT;
|
||||
if (phba->lmt & LMT_8Gb)
|
||||
|
|
@ -4966,17 +4968,14 @@ out_free_mem:
|
|||
* @phba: pointer to lpfc hba data structure.
|
||||
*
|
||||
* This routine is invoked to post rpi header templates to the
|
||||
* HBA consistent with the SLI-4 interface spec. This routine
|
||||
* port for those SLI4 ports that do not support extents. This routine
|
||||
* posts a PAGE_SIZE memory region to the port to hold up to
|
||||
* PAGE_SIZE modulo 64 rpi context headers.
|
||||
* No locks are held here because this is an initialization routine
|
||||
* called only from probe or lpfc_online when interrupts are not
|
||||
* enabled and the driver is reinitializing the device.
|
||||
* PAGE_SIZE modulo 64 rpi context headers. This is an initialization routine
|
||||
* and should be called only when interrupts are disabled.
|
||||
*
|
||||
* Return codes
|
||||
* 0 - successful
|
||||
* -ENOMEM - No available memory
|
||||
* -EIO - The mailbox failed to complete successfully.
|
||||
* -ERROR - otherwise.
|
||||
**/
|
||||
int
|
||||
lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *phba)
|
||||
|
|
@ -5687,17 +5686,22 @@ lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba, uint32_t if_type)
|
|||
break;
|
||||
case LPFC_SLI_INTF_IF_TYPE_2:
|
||||
phba->sli4_hba.u.if_type2.ERR1regaddr =
|
||||
phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_ERR_1;
|
||||
phba->sli4_hba.conf_regs_memmap_p +
|
||||
LPFC_CTL_PORT_ER1_OFFSET;
|
||||
phba->sli4_hba.u.if_type2.ERR2regaddr =
|
||||
phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_ERR_2;
|
||||
phba->sli4_hba.conf_regs_memmap_p +
|
||||
LPFC_CTL_PORT_ER2_OFFSET;
|
||||
phba->sli4_hba.u.if_type2.CTRLregaddr =
|
||||
phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_CNTRL;
|
||||
phba->sli4_hba.conf_regs_memmap_p +
|
||||
LPFC_CTL_PORT_CTL_OFFSET;
|
||||
phba->sli4_hba.u.if_type2.STATUSregaddr =
|
||||
phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_STATUS;
|
||||
phba->sli4_hba.conf_regs_memmap_p +
|
||||
LPFC_CTL_PORT_STA_OFFSET;
|
||||
phba->sli4_hba.SLIINTFregaddr =
|
||||
phba->sli4_hba.conf_regs_memmap_p + LPFC_SLI_INTF;
|
||||
phba->sli4_hba.PSMPHRregaddr =
|
||||
phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_IF2_SMPHR;
|
||||
phba->sli4_hba.conf_regs_memmap_p +
|
||||
LPFC_CTL_PORT_SEM_OFFSET;
|
||||
phba->sli4_hba.RQDBregaddr =
|
||||
phba->sli4_hba.conf_regs_memmap_p + LPFC_RQ_DOORBELL;
|
||||
phba->sli4_hba.WQDBregaddr =
|
||||
|
|
@ -8859,11 +8863,11 @@ lpfc_write_firmware(struct lpfc_hba *phba, const struct firmware *fw)
|
|||
return -EINVAL;
|
||||
}
|
||||
lpfc_decode_firmware_rev(phba, fwrev, 1);
|
||||
if (strncmp(fwrev, image->rev_name, strnlen(fwrev, 16))) {
|
||||
if (strncmp(fwrev, image->revision, strnlen(image->revision, 16))) {
|
||||
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
|
||||
"3023 Updating Firmware. Current Version:%s "
|
||||
"New Version:%s\n",
|
||||
fwrev, image->rev_name);
|
||||
fwrev, image->revision);
|
||||
for (i = 0; i < LPFC_MBX_WR_CONFIG_MAX_BDE; i++) {
|
||||
dmabuf = kzalloc(sizeof(struct lpfc_dmabuf),
|
||||
GFP_KERNEL);
|
||||
|
|
@ -8892,9 +8896,9 @@ lpfc_write_firmware(struct lpfc_hba *phba, const struct firmware *fw)
|
|||
fw->size - offset);
|
||||
break;
|
||||
}
|
||||
temp_offset += SLI4_PAGE_SIZE;
|
||||
memcpy(dmabuf->virt, fw->data + temp_offset,
|
||||
SLI4_PAGE_SIZE);
|
||||
temp_offset += SLI4_PAGE_SIZE;
|
||||
}
|
||||
rc = lpfc_wr_object(phba, &dma_buffer_list,
|
||||
(fw->size - offset), &offset);
|
||||
|
|
|
|||
|
|
@ -12345,19 +12345,18 @@ lpfc_sli4_post_sgl(struct lpfc_hba *phba,
|
|||
}
|
||||
|
||||
/**
|
||||
* lpfc_sli4_init_rpi_hdrs - Post the rpi header memory region to the port
|
||||
* lpfc_sli4_alloc_xri - Get an available rpi in the device's range
|
||||
* @phba: pointer to lpfc hba data structure.
|
||||
*
|
||||
* This routine is invoked to post rpi header templates to the
|
||||
* port for those SLI4 ports that do not support extents. This routine
|
||||
* posts a PAGE_SIZE memory region to the port to hold up to
|
||||
* PAGE_SIZE modulo 64 rpi context headers. This is an initialization routine
|
||||
* and should be called only when interrupts are disabled.
|
||||
* HBA consistent with the SLI-4 interface spec. This routine
|
||||
* posts a SLI4_PAGE_SIZE memory region to the port to hold up to
|
||||
* SLI4_PAGE_SIZE modulo 64 rpi context headers.
|
||||
*
|
||||
* Return codes
|
||||
* 0 - successful
|
||||
* -ERROR - otherwise.
|
||||
*/
|
||||
* Returns
|
||||
* A nonzero rpi defined as rpi_base <= rpi < max_rpi if successful
|
||||
* LPFC_RPI_ALLOC_ERROR if no rpis are available.
|
||||
**/
|
||||
uint16_t
|
||||
lpfc_sli4_alloc_xri(struct lpfc_hba *phba)
|
||||
{
|
||||
|
|
|
|||
|
|
@ -81,6 +81,8 @@
|
|||
(fc_hdr)->fh_f_ctl[1] << 8 | \
|
||||
(fc_hdr)->fh_f_ctl[2])
|
||||
|
||||
#define LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT 12000
|
||||
|
||||
enum lpfc_sli4_queue_type {
|
||||
LPFC_EQ,
|
||||
LPFC_GCQ,
|
||||
|
|
|
|||
Loading…
Reference in a new issue