From 664a84d2c77cbff2945ed7f96d08afbba42b6293 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 13 May 2016 20:53:56 +0300 Subject: [PATCH 1/8] drm/i915: Refresh cached DP port register value on resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During hibernation the cached DP port register value will be left with whatever value we have there when we create the hibernation image. Currently that means the port (and eDP PLL) will be off in the cached value. However when we resume there is no guarantee that the value in the actual register will match the cached value. If i915 isn't loaded in the kernel that loads the hibernation image, the port may well be on (eg. left on by the BIOS). The encoder state readout does the right thing in this case and updates our encoder state to reflect the actual hardware state. However the post-resume modeset will then use the stale cached port register value in intel_dp_link_down() and potentially confuse the hardware. This was caught by the following assert WARNING: CPU: 3 PID: 5288 at ../drivers/gpu/drm/i915/intel_dp.c:2184 assert_edp_pll+0x99/0xa0 [i915] eDP PLL state assertion failure (expected on, current off) on account of the eDP PLL getting prematurely turned off when shutting down the port, since the DP_PLL_ENABLE bit wasn't set in the cached register value. Presumably I introduced this problem in commit 6fec76628333 ("drm/i915: Use intel_dp->DP in eDP PLL setup") as before that we didn't update the cached value after shuttting the port down. That's assuming the port got enabled at least once prior to hibernating. If that didn't happen then the cached value would still have been totally out of sync with reality (eg. first boot w/o eDP on, then hibernate, and then resume with eDP on). So, let's fix this properly and refresh the cached register value from the hardware register during resume. DDI platforms shouldn't use the cached value during port disable at least, so shouldn't have this particular issue. They might still have issues if we skip the initial modeset and then try to retrain the link or something. But untangling this DP vs. DDI mess is a bigger topic, so let's jut punt on DDI for now. Cc: Jani Nikula Cc: stable@vger.kernel.org Fixes: 6fec76628333 ("drm/i915: Use intel_dp->DP in eDP PLL setup") Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1463162036-27931-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak (cherry picked from commit 64989ca4b27acb026b6496ec21e43bee66f86a5b) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 79cf2d5f5a20..49c582d9eb5a 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -4899,13 +4899,15 @@ static void intel_edp_panel_vdd_sanitize(struct intel_dp *intel_dp) void intel_dp_encoder_reset(struct drm_encoder *encoder) { - struct intel_dp *intel_dp; + struct drm_i915_private *dev_priv = to_i915(encoder->dev); + struct intel_dp *intel_dp = enc_to_intel_dp(encoder); + + if (!HAS_DDI(dev_priv)) + intel_dp->DP = I915_READ(intel_dp->output_reg); if (to_intel_encoder(encoder)->type != INTEL_OUTPUT_EDP) return; - intel_dp = enc_to_intel_dp(encoder); - pps_lock(intel_dp); /* From ea12e2a0cad62f6d634da62e7bf50ffe077de13b Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 28 Jun 2016 13:37:30 +0300 Subject: [PATCH 2/8] drm/i915/bxt: Avoid early timeout during PLL enable Since wait_for_atomic doesn't re-check the wait-for condition after expiry of the timeout it can fail when called from non-atomic context even if the condition is set correctly before the expiry. Fix this by using the non-atomic wait_for instead. I noticed this via the PLL locking timing out incorrectly, with this fix I couldn't reproduce the problem. Fixes: 0351b93992aa ("drm/i915: Do not lie about atomic timeout granularity") CC: Chris Wilson CC: Tvrtko Ursulin Signed-off-by: Imre Deak Reviewed-by: Tvrtko Ursulin CC: drm-intel-fixes@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/1467110253-16046-2-git-send-email-imre.deak@intel.com (cherry picked from commit 0b786e41c73956126f6297764459021deef8aba7) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dpll_mgr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c b/drivers/gpu/drm/i915/intel_dpll_mgr.c index baf6f5584cbd..58f60b27837e 100644 --- a/drivers/gpu/drm/i915/intel_dpll_mgr.c +++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c @@ -1377,8 +1377,8 @@ static void bxt_ddi_pll_enable(struct drm_i915_private *dev_priv, I915_WRITE(BXT_PORT_PLL_ENABLE(port), temp); POSTING_READ(BXT_PORT_PLL_ENABLE(port)); - if (wait_for_atomic_us((I915_READ(BXT_PORT_PLL_ENABLE(port)) & - PORT_PLL_LOCK), 200)) + if (wait_for_us((I915_READ(BXT_PORT_PLL_ENABLE(port)) & PORT_PLL_LOCK), + 200)) DRM_ERROR("PLL %d not locked\n", port); /* From 11f6145791775ce41b8993fd29e19eb53ef0ff14 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 28 Jun 2016 13:37:31 +0300 Subject: [PATCH 3/8] drm/i915/lpt: Avoid early timeout during FDI PHY reset Since wait_for_atomic doesn't re-check the wait-for condition after expiry of the timeout it can fail when called from non-atomic context even if the condition is set correctly before the expiry. Fix this by using the non-atomic wait_for instead. Fixes: 0351b93992aa ("drm/i915: Do not lie about atomic timeout granularity") CC: Chris Wilson CC: Tvrtko Ursulin Signed-off-by: Imre Deak Reviewed-by: Tvrtko Ursulin CC: drm-intel-fixes@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/1467110253-16046-3-git-send-email-imre.deak@intel.com (cherry picked from commit cf3598c23cd09d5f063fa8c12fe9ddd5a352d3d5) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 56a1637c864f..a164ea44f668 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8447,16 +8447,16 @@ static void lpt_reset_fdi_mphy(struct drm_i915_private *dev_priv) tmp |= FDI_MPHY_IOSFSB_RESET_CTL; I915_WRITE(SOUTH_CHICKEN2, tmp); - if (wait_for_atomic_us(I915_READ(SOUTH_CHICKEN2) & - FDI_MPHY_IOSFSB_RESET_STATUS, 100)) + if (wait_for_us(I915_READ(SOUTH_CHICKEN2) & + FDI_MPHY_IOSFSB_RESET_STATUS, 100)) DRM_ERROR("FDI mPHY reset assert timeout\n"); tmp = I915_READ(SOUTH_CHICKEN2); tmp &= ~FDI_MPHY_IOSFSB_RESET_CTL; I915_WRITE(SOUTH_CHICKEN2, tmp); - if (wait_for_atomic_us((I915_READ(SOUTH_CHICKEN2) & - FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100)) + if (wait_for_us((I915_READ(SOUTH_CHICKEN2) & + FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100)) DRM_ERROR("FDI mPHY reset de-assert timeout\n"); } From fa7c13e5b1e2076b0ec716ed584ab76f9e65b7a6 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 28 Jun 2016 13:37:32 +0300 Subject: [PATCH 4/8] drm/i915/hsw: Avoid early timeout during LCPLL disable/restore Since wait_for_atomic doesn't re-check the wait-for condition after expiry of the timeout it can fail when called from non-atomic context even if the condition is set correctly before the expiry. Fix this by using the non-atomic wait_for instead. Fixes: 0351b93992aa ("drm/i915: Do not lie about atomic timeout granularity") CC: Chris Wilson CC: Tvrtko Ursulin Signed-off-by: Imre Deak Reviewed-by: Tvrtko Ursulin CC: drm-intel-fixes@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/1467110253-16046-4-git-send-email-imre.deak@intel.com (cherry picked from commit f53dd63f1119a98a16d1a5a7cb3277a2f1ff483d) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index a164ea44f668..04452cf3eae8 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -9440,8 +9440,8 @@ static void hsw_disable_lcpll(struct drm_i915_private *dev_priv, val |= LCPLL_CD_SOURCE_FCLK; I915_WRITE(LCPLL_CTL, val); - if (wait_for_atomic_us(I915_READ(LCPLL_CTL) & - LCPLL_CD_SOURCE_FCLK_DONE, 1)) + if (wait_for_us(I915_READ(LCPLL_CTL) & + LCPLL_CD_SOURCE_FCLK_DONE, 1)) DRM_ERROR("Switching to FCLK failed\n"); val = I915_READ(LCPLL_CTL); @@ -9514,8 +9514,8 @@ static void hsw_restore_lcpll(struct drm_i915_private *dev_priv) val &= ~LCPLL_CD_SOURCE_FCLK; I915_WRITE(LCPLL_CTL, val); - if (wait_for_atomic_us((I915_READ(LCPLL_CTL) & - LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1)) + if (wait_for_us((I915_READ(LCPLL_CTL) & + LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1)) DRM_ERROR("Switching back to LCPLL failed\n"); } From ba34a65324259082dc6d2924cb82d562db1c6a6b Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 28 Jun 2016 13:37:33 +0300 Subject: [PATCH 5/8] drm/i915: Avoid early timeout during AUX transfers Since wait_for_atomic doesn't re-check the wait-for condition after expiry of the timeout it can fail when called from non-atomic context even if the condition is set correctly before the expiry. Fix this by using the non-atomic wait_for instead. Due to the relatively long 10ms timeout, probably this didn't cause any real problems, but fix it in any case for consistency. Fixes: 0351b93992aa ("drm/i915: Do not lie about atomic timeout granularity") CC: Chris Wilson CC: Tvrtko Ursulin Signed-off-by: Imre Deak Reviewed-by: Tvrtko Ursulin CC: drm-intel-fixes@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/1467110253-16046-5-git-send-email-imre.deak@intel.com (cherry picked from commit 713a6b668932213247b394559bc229cd0fec2777) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 49c582d9eb5a..40745e38d438 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -663,7 +663,7 @@ intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq) done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, msecs_to_jiffies_timeout(10)); else - done = wait_for_atomic(C, 10) == 0; + done = wait_for(C, 10) == 0; if (!done) DRM_ERROR("dp aux hw did not signal timeout (has irq: %i)!\n", has_aux_irq); From 42482b4546336ecd93acdd95e435bafd7a4c581c Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Thu, 23 Jun 2016 14:50:35 -0700 Subject: [PATCH 6/8] drm/i915: Add more Kabylake PCI IDs. The spec has been updated adding new PCI IDs. Signed-off-by: Rodrigo Vivi Reviewed-by: Dhinakaran Pandiyan Link: http://patchwork.freedesktop.org/patch/msgid/1466718636-19675-1-git-send-email-rodrigo.vivi@intel.com (cherry picked from commit 33d9391d3020e069dca98fa87a604c037beb2b9e) Signed-off-by: Jani Nikula --- include/drm/i915_pciids.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/drm/i915_pciids.h b/include/drm/i915_pciids.h index 9094599a1150..87dde1c48fbf 100644 --- a/include/drm/i915_pciids.h +++ b/include/drm/i915_pciids.h @@ -309,6 +309,7 @@ INTEL_VGA_DEVICE(0x5906, info), /* ULT GT1 */ \ INTEL_VGA_DEVICE(0x590E, info), /* ULX GT1 */ \ INTEL_VGA_DEVICE(0x5902, info), /* DT GT1 */ \ + INTEL_VGA_DEVICE(0x5908, info), /* Halo GT1 */ \ INTEL_VGA_DEVICE(0x590B, info), /* Halo GT1 */ \ INTEL_VGA_DEVICE(0x590A, info) /* SRV GT1 */ @@ -322,7 +323,9 @@ INTEL_VGA_DEVICE(0x591D, info) /* WKS GT2 */ #define INTEL_KBL_GT3_IDS(info) \ + INTEL_VGA_DEVICE(0x5923, info), /* ULT GT3 */ \ INTEL_VGA_DEVICE(0x5926, info), /* ULT GT3 */ \ + INTEL_VGA_DEVICE(0x5927, info), /* ULT GT3 */ \ INTEL_VGA_DEVICE(0x592B, info), /* Halo GT3 */ \ INTEL_VGA_DEVICE(0x592A, info) /* SRV GT3 */ From 6b9dc6a474fd4e025c615ed4582735360005727c Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Thu, 23 Jun 2016 14:50:36 -0700 Subject: [PATCH 7/8] drm/i915: Removing PCI IDs that are no longer listed as Kabylake. This is unusual. Usually IDs listed on early stages of platform definition are kept there as reserved for later use. However these IDs here are not listed anymore in any of steppings and devices IDs tables for Kabylake on configurations overview section of BSpec. So it is better removing them before they become used in any other future platform. Signed-off-by: Rodrigo Vivi Reviewed-by: Dhinakaran Pandiyan Link: http://patchwork.freedesktop.org/patch/msgid/1466718636-19675-2-git-send-email-rodrigo.vivi@intel.com (cherry picked from commit a922eb8d4581c883c37ce6e12dca9ff2cb1ea723) Signed-off-by: Jani Nikula --- include/drm/i915_pciids.h | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/include/drm/i915_pciids.h b/include/drm/i915_pciids.h index 87dde1c48fbf..33466bfc6440 100644 --- a/include/drm/i915_pciids.h +++ b/include/drm/i915_pciids.h @@ -325,15 +325,10 @@ #define INTEL_KBL_GT3_IDS(info) \ INTEL_VGA_DEVICE(0x5923, info), /* ULT GT3 */ \ INTEL_VGA_DEVICE(0x5926, info), /* ULT GT3 */ \ - INTEL_VGA_DEVICE(0x5927, info), /* ULT GT3 */ \ - INTEL_VGA_DEVICE(0x592B, info), /* Halo GT3 */ \ - INTEL_VGA_DEVICE(0x592A, info) /* SRV GT3 */ + INTEL_VGA_DEVICE(0x5927, info) /* ULT GT3 */ #define INTEL_KBL_GT4_IDS(info) \ - INTEL_VGA_DEVICE(0x5932, info), /* DT GT4 */ \ - INTEL_VGA_DEVICE(0x593B, info), /* Halo GT4 */ \ - INTEL_VGA_DEVICE(0x593A, info), /* SRV GT4 */ \ - INTEL_VGA_DEVICE(0x593D, info) /* WKS GT4 */ + INTEL_VGA_DEVICE(0x593B, info) /* Halo GT4 */ #define INTEL_KBL_IDS(info) \ INTEL_KBL_GT1_IDS(info), \ From cab103274352721b77fc5923a631fc63350bef8e Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 13 Jun 2016 23:42:00 +0000 Subject: [PATCH 8/8] drm/i915: Fix missing unlock on error in i915_ppgtt_info() Add the missing unlock before return from function i915_ppgtt_info() in the error handling case. Fixes: 1d2ac403ae3b(drm: Protect dev->filelist with its own mutex) Signed-off-by: Wei Yongjun Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1465861320-26221-1-git-send-email-weiyj_lk@163.com (cherry picked from commit b0212486909de4f239ca9f20d032de1b1f2dc52e) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_debugfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 32690332d441..103546834b60 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -2365,16 +2365,16 @@ static int i915_ppgtt_info(struct seq_file *m, void *data) task = get_pid_task(file->pid, PIDTYPE_PID); if (!task) { ret = -ESRCH; - goto out_put; + goto out_unlock; } seq_printf(m, "\nproc: %s\n", task->comm); put_task_struct(task); idr_for_each(&file_priv->context_idr, per_file_ctx, (void *)(unsigned long)m); } +out_unlock: mutex_unlock(&dev->filelist_mutex); -out_put: intel_runtime_pm_put(dev_priv); mutex_unlock(&dev->struct_mutex);