1
0
Fork 0

ARM: SoC fixes

A smallish batch of fixes, a little more than expected this late, but
 all fixes are contained to their platforms and seem reasonably low risk:
 
 - A somewhat large SMP fix for ux500 that still seemed warranted to include here
 - OMAP DT fixes for pbias regulator specification that broke due to some DT
   reshuffling
 - PCIe IRQ routing bugfix for i.MX
 - Networking fixes for keystone
 - Runtime PM for OMAP GPMC
 - A couple of error path bug fixes for exynos
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV0OYvAAoJEIwa5zzehBx3KjMP/iqazSkZERCSIQ/SQYsy+tdr
 xBKjHlz4mUuEMHtRx5Ro+IZRhTxZRsD6FR5Kiy435ipDFRAk+cObRhJMsPyfCybA
 40UN6WyZP0CKvlvYuxoeEWfDw+G1gRIDunfpz+d9E5JjDESyPbGvnoNiuZT1LmEC
 zo80U5DorU5Dmu/wWkzF+7UN8YRCC7oEykujltZ73UXH4BnYfcyRvav3HGkx2gV8
 gB1j30geoOAHGOasNBFMHGMtTf8lv/6g6KtR5tVVJ+jkT1dmz6D1z45cMVbCZtal
 uwbyX0cr2FhIY6U9Wb2yXVX9YOhJbnmyyafE+SQmFi6cebsmP4aZeqK2r98Tx1JD
 xWqrzJbMkD+qKRCrsK2D3Jbt6pmxRr90c+yemR0Cfntp6ybby/qPdJiNDLuEVorf
 LD1yuOLn4Jiejkf5bLxgYIjGbPWMtiN0OfmkEKmz8QuJx95M1pQkr/k7WeoyNEYi
 2ymh7n76doF8NVyXH9TWSMyaFivDVxCtyC7/as4Ob17w2fst7LrJq3JlXNfdFjkD
 cuq5SPp5Zpe/UVS/iivDTnFV/yGDkwERT9zO6Zqorfkb0A52OyhbMDZyZ75n5iHs
 /OSJbxMmPWyiN03CP4JBYmDlSF3ITvb0QTYZfpt5/eiQlPfgt91Ig7vj0lievkvo
 P/xww2UdUKEM9GEkYxpz
 =Auuc
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "A smallish batch of fixes, a little more than expected this late, but
  all fixes are contained to their platforms and seem reasonably low
  risk:

   - a somewhat large SMP fix for ux500 that still seemed warranted to
     include here
   - OMAP DT fixes for pbias regulator specification that broke due to
     some DT reshuffling
   - PCIe IRQ routing bugfix for i.MX
   - networking fixes for keystone
   - runtime PM for OMAP GPMC
   - a couple of error path bug fixes for exynos"

* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: keystone: Fix the mdio bindings by moving it to soc specific file
  ARM: dts: keystone: fix the clock node for mdio
  memory: omap-gpmc: Don't try to save uninitialized GPMC context
  ARM: imx6: correct i.MX6 PCIe interrupt routing
  ARM: ux500: add an SMP enablement type and move cpu nodes
  ARM: dts: dra7: Fix broken pbias device creation
  ARM: dts: OMAP5: Fix broken pbias device creation
  ARM: dts: OMAP4: Fix broken pbias device creation
  ARM: dts: omap243x: Fix broken pbias device creation
  ARM: EXYNOS: fix double of_node_put() on error path
  ARM: EXYNOS: Fix potentian kfree() of ro memory
steinar/wifi_calib_4_9_kernel
Linus Torvalds 2015-08-16 15:44:33 -07:00
commit 8916e0b03e
13 changed files with 79 additions and 56 deletions

View File

@ -199,6 +199,7 @@ nodes to be present and contain the properties described below.
"qcom,kpss-acc-v1"
"qcom,kpss-acc-v2"
"rockchip,rk3066-smp"
"ste,dbx500-smp"
- cpu-release-addr
Usage: required for systems that have an "enable-method"

View File

@ -116,7 +116,7 @@
ranges = <0 0x2000 0x2000>;
scm_conf: scm_conf@0 {
compatible = "syscon";
compatible = "syscon", "simple-bus";
reg = <0x0 0x1400>;
#address-cells = <1>;
#size-cells = <1>;

View File

@ -181,10 +181,10 @@
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
<&clks IMX6QDL_CLK_LVDS1_GATE>,
<&clks IMX6QDL_CLK_PCIE_REF_125M>;

View File

@ -131,10 +131,17 @@
<GIC_SPI 376 IRQ_TYPE_EDGE_RISING>;
};
};
mdio: mdio@24200f00 {
compatible = "ti,keystone_mdio", "ti,davinci_mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x24200f00 0x100>;
status = "disabled";
clocks = <&clkcpgmac>;
clock-names = "fck";
bus_freq = <2500000>;
};
/include/ "k2e-netcp.dtsi"
};
};
&mdio {
reg = <0x24200f00 0x100>;
};

View File

@ -98,6 +98,17 @@
#gpio-cells = <2>;
gpio,syscon-dev = <&devctrl 0x25c>;
};
mdio: mdio@02090300 {
compatible = "ti,keystone_mdio", "ti,davinci_mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x02090300 0x100>;
status = "disabled";
clocks = <&clkcpgmac>;
clock-names = "fck";
bus_freq = <2500000>;
};
/include/ "k2hk-netcp.dtsi"
};
};

View File

@ -29,7 +29,6 @@
};
soc {
/include/ "k2l-clocks.dtsi"
uart2: serial@02348400 {
@ -79,6 +78,17 @@
#gpio-cells = <2>;
gpio,syscon-dev = <&devctrl 0x24c>;
};
mdio: mdio@26200f00 {
compatible = "ti,keystone_mdio", "ti,davinci_mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x26200f00 0x100>;
status = "disabled";
clocks = <&clkcpgmac>;
clock-names = "fck";
bus_freq = <2500000>;
};
/include/ "k2l-netcp.dtsi"
};
};
@ -96,7 +106,3 @@
/* Pin muxed. Enabled and configured by Bootloader */
status = "disabled";
};
&mdio {
reg = <0x26200f00 0x100>;
};

View File

@ -267,17 +267,6 @@
1 0 0x21000A00 0x00000100>;
};
mdio: mdio@02090300 {
compatible = "ti,keystone_mdio", "ti,davinci_mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x02090300 0x100>;
status = "disabled";
clocks = <&clkpa>;
clock-names = "fck";
bus_freq = <2500000>;
};
kirq0: keystone_irq@26202a0 {
compatible = "ti,keystone-irq";
interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;

View File

@ -51,7 +51,8 @@
};
scm_conf: scm_conf@270 {
compatible = "syscon";
compatible = "syscon",
"simple-bus";
reg = <0x270 0x240>;
#address-cells = <1>;
#size-cells = <1>;

View File

@ -191,7 +191,8 @@
};
omap4_padconf_global: omap4_padconf_global@5a0 {
compatible = "syscon";
compatible = "syscon",
"simple-bus";
reg = <0x5a0 0x170>;
#address-cells = <1>;
#size-cells = <1>;

View File

@ -180,7 +180,8 @@
};
omap5_padconf_global: omap5_padconf_global@5a0 {
compatible = "syscon";
compatible = "syscon",
"simple-bus";
reg = <0x5a0 0xec>;
#address-cells = <1>;
#size-cells = <1>;

View File

@ -15,6 +15,33 @@
#include "skeleton.dtsi"
/ {
cpus {
#address-cells = <1>;
#size-cells = <0>;
enable-method = "ste,dbx500-smp";
cpu-map {
cluster0 {
core0 {
cpu = <&CPU0>;
};
core1 {
cpu = <&CPU1>;
};
};
};
CPU0: cpu@300 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0x300>;
};
CPU1: cpu@301 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0x301>;
};
};
soc {
#address-cells = <1>;
#size-cells = <1>;
@ -22,32 +49,6 @@
interrupt-parent = <&intc>;
ranges;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu-map {
cluster0 {
core0 {
cpu = <&CPU0>;
};
core1 {
cpu = <&CPU1>;
};
};
};
CPU0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
};
CPU1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
};
};
ptm@801ae000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0x801ae000 0x1000>;

View File

@ -146,9 +146,8 @@ static __init int exynos4_pm_init_power_domain(void)
pd->base = of_iomap(np, 0);
if (!pd->base) {
pr_warn("%s: failed to map memory\n", __func__);
kfree(pd->pd.name);
kfree_const(pd->pd.name);
kfree(pd);
of_node_put(np);
continue;
}

View File

@ -2245,6 +2245,9 @@ void omap3_gpmc_save_context(void)
{
int i;
if (!gpmc_base)
return;
gpmc_context.sysconfig = gpmc_read_reg(GPMC_SYSCONFIG);
gpmc_context.irqenable = gpmc_read_reg(GPMC_IRQENABLE);
gpmc_context.timeout_ctrl = gpmc_read_reg(GPMC_TIMEOUT_CONTROL);
@ -2277,6 +2280,9 @@ void omap3_gpmc_restore_context(void)
{
int i;
if (!gpmc_base)
return;
gpmc_write_reg(GPMC_SYSCONFIG, gpmc_context.sysconfig);
gpmc_write_reg(GPMC_IRQENABLE, gpmc_context.irqenable);
gpmc_write_reg(GPMC_TIMEOUT_CONTROL, gpmc_context.timeout_ctrl);