mtd: pxa3xx_nand: clean up the pxa3xx timings

With the previous modifications, lots of pxa3xx specific definitions can
be removed.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
This commit is contained in:
Antoine Ténart 2015-10-21 10:29:04 +02:00 committed by Brian Norris
parent f19fe9833d
commit 89c1702da7

View file

@ -266,14 +266,9 @@ struct pxa3xx_nand_timing {
};
struct pxa3xx_nand_flash {
char *name;
uint32_t chip_id;
unsigned int page_per_block; /* Pages per block (PG_PER_BLK) */
unsigned int page_size; /* Page size in bytes (PAGE_SZ) */
unsigned int flash_width; /* Width of Flash memory (DWIDTH_M) */
unsigned int dfc_width; /* Width of flash controller(DWIDTH_C) */
unsigned int num_blocks; /* Number of physical blocks in Flash */
struct pxa3xx_nand_timing *timing; /* NAND Flash timing */
};
@ -285,15 +280,14 @@ static struct pxa3xx_nand_timing timing[] = {
};
static struct pxa3xx_nand_flash builtin_flash_types[] = {
{ "DEFAULT FLASH", 0, 0, 2048, 8, 8, 0, &timing[0] },
{ "64MiB 16-bit", 0x46ec, 32, 512, 16, 16, 4096, &timing[1] },
{ "256MiB 8-bit", 0xdaec, 64, 2048, 8, 8, 2048, &timing[1] },
{ "4GiB 8-bit", 0xd7ec, 128, 4096, 8, 8, 8192, &timing[1] },
{ "128MiB 8-bit", 0xa12c, 64, 2048, 8, 8, 1024, &timing[2] },
{ "128MiB 16-bit", 0xb12c, 64, 2048, 16, 16, 1024, &timing[2] },
{ "512MiB 8-bit", 0xdc2c, 64, 2048, 8, 8, 4096, &timing[2] },
{ "512MiB 16-bit", 0xcc2c, 64, 2048, 16, 16, 4096, &timing[2] },
{ "256MiB 16-bit", 0xba20, 64, 2048, 16, 16, 2048, &timing[3] },
{ 0x46ec, 16, 16, &timing[1] },
{ 0xdaec, 8, 8, &timing[1] },
{ 0xd7ec, 8, 8, &timing[1] },
{ 0xa12c, 8, 8, &timing[2] },
{ 0xb12c, 16, 16, &timing[2] },
{ 0xdc2c, 8, 8, &timing[2] },
{ 0xcc2c, 16, 16, &timing[2] },
{ 0xba20, 16, 16, &timing[3] },
};
static u8 bbt_pattern[] = {'M', 'V', 'B', 'b', 't', '0' };
@ -354,9 +348,6 @@ static struct nand_ecclayout ecc_layout_4KB_bch8bit = {
.oobfree = { }
};
/* Define a default flash type setting serve as flash detecting only */
#define DEFAULT_FLASH_TYPE (&builtin_flash_types[0])
#define NDTR0_tCH(c) (min((c), 7) << 19)
#define NDTR0_tCS(c) (min((c), 7) << 16)
#define NDTR0_tWH(c) (min((c), 7) << 11)