mmc: spi: Move SSP register definitions into separate file
Move the definitions into separate file so separate SPI driver can be implemented. The SSP controller in MXS can act both as a MMC host and as a SPI host. Based on previous attempt by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Chris Ball <cjb@laptop.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
parent
d9875690d9
commit
8be3d3b2ac
|
@ -45,87 +45,10 @@
|
|||
#include <linux/pinctrl/consumer.h>
|
||||
#include <linux/stmp_device.h>
|
||||
#include <linux/mmc/mxs-mmc.h>
|
||||
#include <linux/spi/mxs-spi.h>
|
||||
|
||||
#define DRIVER_NAME "mxs-mmc"
|
||||
|
||||
/* card detect polling timeout */
|
||||
#define MXS_MMC_DETECT_TIMEOUT (HZ/2)
|
||||
|
||||
#define ssp_is_old(host) ((host)->devid == IMX23_MMC)
|
||||
|
||||
/* SSP registers */
|
||||
#define HW_SSP_CTRL0 0x000
|
||||
#define BM_SSP_CTRL0_RUN (1 << 29)
|
||||
#define BM_SSP_CTRL0_SDIO_IRQ_CHECK (1 << 28)
|
||||
#define BM_SSP_CTRL0_IGNORE_CRC (1 << 26)
|
||||
#define BM_SSP_CTRL0_READ (1 << 25)
|
||||
#define BM_SSP_CTRL0_DATA_XFER (1 << 24)
|
||||
#define BP_SSP_CTRL0_BUS_WIDTH (22)
|
||||
#define BM_SSP_CTRL0_BUS_WIDTH (0x3 << 22)
|
||||
#define BM_SSP_CTRL0_WAIT_FOR_IRQ (1 << 21)
|
||||
#define BM_SSP_CTRL0_LONG_RESP (1 << 19)
|
||||
#define BM_SSP_CTRL0_GET_RESP (1 << 17)
|
||||
#define BM_SSP_CTRL0_ENABLE (1 << 16)
|
||||
#define BP_SSP_CTRL0_XFER_COUNT (0)
|
||||
#define BM_SSP_CTRL0_XFER_COUNT (0xffff)
|
||||
#define HW_SSP_CMD0 0x010
|
||||
#define BM_SSP_CMD0_DBL_DATA_RATE_EN (1 << 25)
|
||||
#define BM_SSP_CMD0_SLOW_CLKING_EN (1 << 22)
|
||||
#define BM_SSP_CMD0_CONT_CLKING_EN (1 << 21)
|
||||
#define BM_SSP_CMD0_APPEND_8CYC (1 << 20)
|
||||
#define BP_SSP_CMD0_BLOCK_SIZE (16)
|
||||
#define BM_SSP_CMD0_BLOCK_SIZE (0xf << 16)
|
||||
#define BP_SSP_CMD0_BLOCK_COUNT (8)
|
||||
#define BM_SSP_CMD0_BLOCK_COUNT (0xff << 8)
|
||||
#define BP_SSP_CMD0_CMD (0)
|
||||
#define BM_SSP_CMD0_CMD (0xff)
|
||||
#define HW_SSP_CMD1 0x020
|
||||
#define HW_SSP_XFER_SIZE 0x030
|
||||
#define HW_SSP_BLOCK_SIZE 0x040
|
||||
#define BP_SSP_BLOCK_SIZE_BLOCK_COUNT (4)
|
||||
#define BM_SSP_BLOCK_SIZE_BLOCK_COUNT (0xffffff << 4)
|
||||
#define BP_SSP_BLOCK_SIZE_BLOCK_SIZE (0)
|
||||
#define BM_SSP_BLOCK_SIZE_BLOCK_SIZE (0xf)
|
||||
#define HW_SSP_TIMING(h) (ssp_is_old(h) ? 0x050 : 0x070)
|
||||
#define BP_SSP_TIMING_TIMEOUT (16)
|
||||
#define BM_SSP_TIMING_TIMEOUT (0xffff << 16)
|
||||
#define BP_SSP_TIMING_CLOCK_DIVIDE (8)
|
||||
#define BM_SSP_TIMING_CLOCK_DIVIDE (0xff << 8)
|
||||
#define BP_SSP_TIMING_CLOCK_RATE (0)
|
||||
#define BM_SSP_TIMING_CLOCK_RATE (0xff)
|
||||
#define HW_SSP_CTRL1(h) (ssp_is_old(h) ? 0x060 : 0x080)
|
||||
#define BM_SSP_CTRL1_SDIO_IRQ (1 << 31)
|
||||
#define BM_SSP_CTRL1_SDIO_IRQ_EN (1 << 30)
|
||||
#define BM_SSP_CTRL1_RESP_ERR_IRQ (1 << 29)
|
||||
#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN (1 << 28)
|
||||
#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ (1 << 27)
|
||||
#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN (1 << 26)
|
||||
#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ (1 << 25)
|
||||
#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN (1 << 24)
|
||||
#define BM_SSP_CTRL1_DATA_CRC_IRQ (1 << 23)
|
||||
#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN (1 << 22)
|
||||
#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ (1 << 21)
|
||||
#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ_EN (1 << 20)
|
||||
#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ (1 << 17)
|
||||
#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN (1 << 16)
|
||||
#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ (1 << 15)
|
||||
#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ_EN (1 << 14)
|
||||
#define BM_SSP_CTRL1_DMA_ENABLE (1 << 13)
|
||||
#define BM_SSP_CTRL1_POLARITY (1 << 9)
|
||||
#define BP_SSP_CTRL1_WORD_LENGTH (4)
|
||||
#define BM_SSP_CTRL1_WORD_LENGTH (0xf << 4)
|
||||
#define BP_SSP_CTRL1_SSP_MODE (0)
|
||||
#define BM_SSP_CTRL1_SSP_MODE (0xf)
|
||||
#define HW_SSP_SDRESP0(h) (ssp_is_old(h) ? 0x080 : 0x0a0)
|
||||
#define HW_SSP_SDRESP1(h) (ssp_is_old(h) ? 0x090 : 0x0b0)
|
||||
#define HW_SSP_SDRESP2(h) (ssp_is_old(h) ? 0x0a0 : 0x0c0)
|
||||
#define HW_SSP_SDRESP3(h) (ssp_is_old(h) ? 0x0b0 : 0x0d0)
|
||||
#define HW_SSP_STATUS(h) (ssp_is_old(h) ? 0x0c0 : 0x100)
|
||||
#define BM_SSP_STATUS_CARD_DETECT (1 << 28)
|
||||
#define BM_SSP_STATUS_SDIO_IRQ (1 << 17)
|
||||
|
||||
#define BF_SSP(value, field) (((value) << BP_SSP_##field) & BM_SSP_##field)
|
||||
|
||||
#define MXS_MMC_IRQ_BITS (BM_SSP_CTRL1_SDIO_IRQ | \
|
||||
BM_SSP_CTRL1_RESP_ERR_IRQ | \
|
||||
BM_SSP_CTRL1_RESP_TIMEOUT_IRQ | \
|
||||
|
@ -135,12 +58,8 @@
|
|||
BM_SSP_CTRL1_RECV_TIMEOUT_IRQ | \
|
||||
BM_SSP_CTRL1_FIFO_OVERRUN_IRQ)
|
||||
|
||||
#define SSP_PIO_NUM 3
|
||||
|
||||
enum mxs_mmc_id {
|
||||
IMX23_MMC,
|
||||
IMX28_MMC,
|
||||
};
|
||||
/* card detect polling timeout */
|
||||
#define MXS_MMC_DETECT_TIMEOUT (HZ/2)
|
||||
|
||||
struct mxs_mmc_host {
|
||||
struct mmc_host *mmc;
|
||||
|
|
109
include/linux/spi/mxs-spi.h
Normal file
109
include/linux/spi/mxs-spi.h
Normal file
|
@ -0,0 +1,109 @@
|
|||
/*
|
||||
* include/linux/spi/mxs-spi.h
|
||||
*
|
||||
* Freescale i.MX233/i.MX28 SPI controller register definition
|
||||
*
|
||||
* Copyright 2008 Embedded Alley Solutions, Inc.
|
||||
* Copyright 2009-2011 Freescale Semiconductor, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||
*/
|
||||
|
||||
#ifndef __LINUX_SPI_MXS_SPI_H__
|
||||
#define __LINUX_SPI_MXS_SPI_H__
|
||||
|
||||
#define ssp_is_old(host) ((host)->devid == IMX23_MMC)
|
||||
|
||||
/* SSP registers */
|
||||
#define HW_SSP_CTRL0 0x000
|
||||
#define BM_SSP_CTRL0_RUN (1 << 29)
|
||||
#define BM_SSP_CTRL0_SDIO_IRQ_CHECK (1 << 28)
|
||||
#define BM_SSP_CTRL0_IGNORE_CRC (1 << 26)
|
||||
#define BM_SSP_CTRL0_READ (1 << 25)
|
||||
#define BM_SSP_CTRL0_DATA_XFER (1 << 24)
|
||||
#define BP_SSP_CTRL0_BUS_WIDTH 22
|
||||
#define BM_SSP_CTRL0_BUS_WIDTH (0x3 << 22)
|
||||
#define BM_SSP_CTRL0_WAIT_FOR_IRQ (1 << 21)
|
||||
#define BM_SSP_CTRL0_LONG_RESP (1 << 19)
|
||||
#define BM_SSP_CTRL0_GET_RESP (1 << 17)
|
||||
#define BM_SSP_CTRL0_ENABLE (1 << 16)
|
||||
#define BP_SSP_CTRL0_XFER_COUNT 0
|
||||
#define BM_SSP_CTRL0_XFER_COUNT 0xffff
|
||||
#define HW_SSP_CMD0 0x010
|
||||
#define BM_SSP_CMD0_DBL_DATA_RATE_EN (1 << 25)
|
||||
#define BM_SSP_CMD0_SLOW_CLKING_EN (1 << 22)
|
||||
#define BM_SSP_CMD0_CONT_CLKING_EN (1 << 21)
|
||||
#define BM_SSP_CMD0_APPEND_8CYC (1 << 20)
|
||||
#define BP_SSP_CMD0_BLOCK_SIZE 16
|
||||
#define BM_SSP_CMD0_BLOCK_SIZE (0xf << 16)
|
||||
#define BP_SSP_CMD0_BLOCK_COUNT 8
|
||||
#define BM_SSP_CMD0_BLOCK_COUNT (0xff << 8)
|
||||
#define BP_SSP_CMD0_CMD 0
|
||||
#define BM_SSP_CMD0_CMD 0xff
|
||||
#define HW_SSP_CMD1 0x020
|
||||
#define HW_SSP_XFER_SIZE 0x030
|
||||
#define HW_SSP_BLOCK_SIZE 0x040
|
||||
#define BP_SSP_BLOCK_SIZE_BLOCK_COUNT 4
|
||||
#define BM_SSP_BLOCK_SIZE_BLOCK_COUNT (0xffffff << 4)
|
||||
#define BP_SSP_BLOCK_SIZE_BLOCK_SIZE 0
|
||||
#define BM_SSP_BLOCK_SIZE_BLOCK_SIZE 0xf
|
||||
#define HW_SSP_TIMING(h) (ssp_is_old(h) ? 0x050 : 0x070)
|
||||
#define BP_SSP_TIMING_TIMEOUT 16
|
||||
#define BM_SSP_TIMING_TIMEOUT (0xffff << 16)
|
||||
#define BP_SSP_TIMING_CLOCK_DIVIDE 8
|
||||
#define BM_SSP_TIMING_CLOCK_DIVIDE (0xff << 8)
|
||||
#define BP_SSP_TIMING_CLOCK_RATE 0
|
||||
#define BM_SSP_TIMING_CLOCK_RATE 0xff
|
||||
#define HW_SSP_CTRL1(h) (ssp_is_old(h) ? 0x060 : 0x080)
|
||||
#define BM_SSP_CTRL1_SDIO_IRQ (1 << 31)
|
||||
#define BM_SSP_CTRL1_SDIO_IRQ_EN (1 << 30)
|
||||
#define BM_SSP_CTRL1_RESP_ERR_IRQ (1 << 29)
|
||||
#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN (1 << 28)
|
||||
#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ (1 << 27)
|
||||
#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN (1 << 26)
|
||||
#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ (1 << 25)
|
||||
#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN (1 << 24)
|
||||
#define BM_SSP_CTRL1_DATA_CRC_IRQ (1 << 23)
|
||||
#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN (1 << 22)
|
||||
#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ (1 << 21)
|
||||
#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ_EN (1 << 20)
|
||||
#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ (1 << 17)
|
||||
#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN (1 << 16)
|
||||
#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ (1 << 15)
|
||||
#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ_EN (1 << 14)
|
||||
#define BM_SSP_CTRL1_DMA_ENABLE (1 << 13)
|
||||
#define BM_SSP_CTRL1_POLARITY (1 << 9)
|
||||
#define BP_SSP_CTRL1_WORD_LENGTH 4
|
||||
#define BM_SSP_CTRL1_WORD_LENGTH (0xf << 4)
|
||||
#define BP_SSP_CTRL1_SSP_MODE 0
|
||||
#define BM_SSP_CTRL1_SSP_MODE 0xf
|
||||
#define HW_SSP_SDRESP0(h) (ssp_is_old(h) ? 0x080 : 0x0a0)
|
||||
#define HW_SSP_SDRESP1(h) (ssp_is_old(h) ? 0x090 : 0x0b0)
|
||||
#define HW_SSP_SDRESP2(h) (ssp_is_old(h) ? 0x0a0 : 0x0c0)
|
||||
#define HW_SSP_SDRESP3(h) (ssp_is_old(h) ? 0x0b0 : 0x0d0)
|
||||
#define HW_SSP_STATUS(h) (ssp_is_old(h) ? 0x0c0 : 0x100)
|
||||
#define BM_SSP_STATUS_CARD_DETECT (1 << 28)
|
||||
#define BM_SSP_STATUS_SDIO_IRQ (1 << 17)
|
||||
|
||||
#define BF_SSP(value, field) (((value) << BP_SSP_##field) & BM_SSP_##field)
|
||||
|
||||
#define SSP_PIO_NUM 3
|
||||
|
||||
enum mxs_mmc_id {
|
||||
IMX23_MMC,
|
||||
IMX28_MMC,
|
||||
};
|
||||
|
||||
#endif /* __LINUX_SPI_MXS_SPI_H__ */
|
Loading…
Reference in a new issue