[PATCH] ppc: fix-up schedule_timeout() usage

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.  Also use
human-time conversion functions instead of hard-coded HZ division to avoid
rounding errors.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
Nishanth Aravamudan 2005-11-07 01:01:13 -08:00 committed by Linus Torvalds
parent 28faa4298e
commit 8f09f4a25a
2 changed files with 8 additions and 12 deletions

View file

@ -1145,8 +1145,8 @@ static int set_serial_info(struct SICC_info *info,
info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) |
(info->flags & ASYNC_INTERNAL_FLAGS));
state->custom_divisor = new_serial.custom_divisor;
state->close_delay = new_serial.close_delay * HZ / 100;
state->closing_wait = new_serial.closing_wait * HZ / 100;
state->close_delay = msecs_to_jiffies(10 * new_serial.close_delay);
state->closing_wait = msecs_to_jiffies(10 * new_serial.closing_wait);
info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
port->fifosize = new_serial.xmit_fifo_size;
@ -1465,10 +1465,8 @@ static void siccuart_close(struct tty_struct *tty, struct file *filp)
info->event = 0;
info->tty = NULL;
if (info->blocked_open) {
if (info->state->close_delay) {
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(info->state->close_delay);
}
if (info->state->close_delay)
schedule_timeout_interruptible(info->state->close_delay);
wake_up_interruptible(&info->open_wait);
}
info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
@ -1496,7 +1494,7 @@ static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout)
* Note: we have to use pretty tight timings here to satisfy
* the NIST-PCTS.
*/
char_time = (info->timeout - HZ/50) / info->port->fifosize;
char_time = (info->timeout - msecs_to_jiffies(20)) / info->port->fifosize;
char_time = char_time / 5;
if (char_time == 0)
char_time = 1;
@ -1521,8 +1519,7 @@ static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout)
tty->index, jiffies,
expire, char_time);
while ((readb(info->port->uart_base + BL_SICC_LSR) & _LSR_TX_ALL) != _LSR_TX_ALL) {
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(char_time);
schedule_timeout_interruptible(char_time);
if (signal_pending(current))
break;
if (timeout && time_after(jiffies, expire))
@ -1773,7 +1770,7 @@ int __init siccuart_init(void)
for (i = 0; i < SERIAL_SICC_NR; i++) {
struct SICC_state *state = sicc_state + i;
state->line = i;
state->close_delay = 5 * HZ / 10;
state->close_delay = msecs_to_jiffies(500);
state->closing_wait = 30 * HZ;
spin_lock_init(&state->sicc_lock);
}

View file

@ -1309,8 +1309,7 @@ static void mii_dm9161_wait(uint mii_reg, struct net_device *dev)
/* Davicom takes a bit to come up after a reset,
* so wait here for a bit */
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(timeout);
schedule_timeout_uninterruptible(timeout);
}
static phy_info_t phy_info_dm9161 = {