[SCSI] sgiwd93: interfacing to wd33c93
1) sgiwd93 used to switch off asynchronous mode on the wd33c93, discarding any "nosync"-requests from the commandline. But we need to allow "nosync"-requests for selected devices, for example the Pioneer DVD305S. (For the curious: this device accepts the SDTR from wd33c93 and success- fully sends inquiry data in sync mode, but after the data phase in the inquiry command does an unexpected disconnect, seemingly sending no "status" or "command complete". Forcing async transfers makes it work together flawlessly with the wd33c93. Of course, preferable would be, to implement wd33c93's "resume command" stuff, but that probably will not come soon.) 2) Maximize benefit from the preceding Fast SCSI patch for wd33c93 by passing the higher input-clock frequency explicitely. To be applied after the mentioned wd33c93 patch. Signed-off-by: peter fuerst <post@pfrst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
This commit is contained in:
parent
a5d8421b2f
commit
8f3334edae
|
@ -244,9 +244,10 @@ static struct Scsi_Host * __init sgiwd93_setup_scsi(
|
|||
regs.SASR = wdregs + 3;
|
||||
regs.SCMD = wdregs + 7;
|
||||
|
||||
wd33c93_init(host, regs, dma_setup, dma_stop, WD33C93_FS_16_20);
|
||||
wd33c93_init(host, regs, dma_setup, dma_stop, WD33C93_FS_MHZ(20));
|
||||
|
||||
hdata->wh.no_sync = 0;
|
||||
if (hdata->wh.no_sync == 0xff)
|
||||
hdata->wh.no_sync = 0;
|
||||
|
||||
if (request_irq(irq, sgiwd93_intr, 0, "SGI WD93", (void *) host)) {
|
||||
printk(KERN_WARNING "sgiwd93: Could not register irq %d "
|
||||
|
|
Loading…
Reference in a new issue