diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c index f10a6ad37c06..c2301da08ac7 100644 --- a/drivers/thermal/samsung/exynos_thermal_common.c +++ b/drivers/thermal/samsung/exynos_thermal_common.c @@ -310,8 +310,6 @@ void exynos_report_trigger(struct thermal_sensor_conf *conf) } th_zone = conf->pzone_data; - if (th_zone->therm_dev) - return; if (th_zone->bind == false) { for (i = 0; i < th_zone->cool_dev_size; i++) { diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index b43afda8acd1..32f38b90c4f6 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -317,6 +317,9 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) con = readl(data->base + reg->tmu_ctrl); + if (pdata->test_mux) + con |= (pdata->test_mux << reg->test_mux_addr_shift); + if (pdata->reference_voltage) { con &= ~(reg->buf_vref_sel_mask << reg->buf_vref_sel_shift); con |= pdata->reference_voltage << reg->buf_vref_sel_shift; @@ -488,7 +491,7 @@ static const struct of_device_id exynos_tmu_match[] = { }, { .compatible = "samsung,exynos4412-tmu", - .data = (void *)EXYNOS5250_TMU_DRV_DATA, + .data = (void *)EXYNOS4412_TMU_DRV_DATA, }, { .compatible = "samsung,exynos5250-tmu", @@ -629,9 +632,10 @@ static int exynos_tmu_probe(struct platform_device *pdev) if (ret) return ret; - if (pdata->type == SOC_ARCH_EXYNOS || - pdata->type == SOC_ARCH_EXYNOS4210 || - pdata->type == SOC_ARCH_EXYNOS5440) + if (pdata->type == SOC_ARCH_EXYNOS4210 || + pdata->type == SOC_ARCH_EXYNOS4412 || + pdata->type == SOC_ARCH_EXYNOS5250 || + pdata->type == SOC_ARCH_EXYNOS5440) data->soc = pdata->type; else { ret = -EINVAL; diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h index b364c9eee701..3fb65547e64c 100644 --- a/drivers/thermal/samsung/exynos_tmu.h +++ b/drivers/thermal/samsung/exynos_tmu.h @@ -41,7 +41,8 @@ enum calibration_mode { enum soc_type { SOC_ARCH_EXYNOS4210 = 1, - SOC_ARCH_EXYNOS, + SOC_ARCH_EXYNOS4412, + SOC_ARCH_EXYNOS5250, SOC_ARCH_EXYNOS5440, }; @@ -84,6 +85,7 @@ enum soc_type { * @triminfo_reload_shift: shift of triminfo reload enable bit in triminfo_ctrl reg. * @tmu_ctrl: TMU main controller register. + * @test_mux_addr_shift: shift bits of test mux address. * @buf_vref_sel_shift: shift bits of reference voltage in tmu_ctrl register. * @buf_vref_sel_mask: mask bits of reference voltage in tmu_ctrl register. * @therm_trip_mode_shift: shift bits of tripping mode in tmu_ctrl register. @@ -150,6 +152,7 @@ struct exynos_tmu_registers { u32 triminfo_reload_shift; u32 tmu_ctrl; + u32 test_mux_addr_shift; u32 buf_vref_sel_shift; u32 buf_vref_sel_mask; u32 therm_trip_mode_shift; @@ -257,6 +260,7 @@ struct exynos_tmu_registers { * @first_point_trim: temp value of the first point trimming * @second_point_trim: temp value of the second point trimming * @default_temp_offset: default temperature offset in case of no trimming + * @test_mux; information if SoC supports test MUX * @cal_type: calibration type for temperature * @cal_mode: calibration mode for temperature * @freq_clip_table: Table representing frequency reduction percentage. @@ -286,6 +290,7 @@ struct exynos_tmu_platform_data { u8 first_point_trim; u8 second_point_trim; u8 default_temp_offset; + u8 test_mux; enum calibration_type cal_type; enum calibration_mode cal_mode; diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c index 9002499c1f69..073c292baa53 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.c +++ b/drivers/thermal/samsung/exynos_tmu_data.c @@ -90,14 +90,15 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = { }; #endif -#if defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412) -static const struct exynos_tmu_registers exynos5250_tmu_registers = { +#if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250) +static const struct exynos_tmu_registers exynos4412_tmu_registers = { .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, .triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON, .triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, + .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT, .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, @@ -128,7 +129,7 @@ static const struct exynos_tmu_registers exynos5250_tmu_registers = { .emul_time_mask = EXYNOS_EMUL_TIME_MASK, }; -#define EXYNOS5250_TMU_DATA \ +#define EXYNOS4412_TMU_DATA \ .threshold_falling = 10, \ .trigger_levels[0] = 85, \ .trigger_levels[1] = 103, \ @@ -162,15 +163,32 @@ static const struct exynos_tmu_registers exynos5250_tmu_registers = { .temp_level = 103, \ }, \ .freq_tab_count = 2, \ - .type = SOC_ARCH_EXYNOS, \ - .registers = &exynos5250_tmu_registers, \ + .registers = &exynos4412_tmu_registers, \ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ TMU_SUPPORT_EMUL_TIME) +#endif +#if defined(CONFIG_SOC_EXYNOS4412) +struct exynos_tmu_init_data const exynos4412_default_tmu_data = { + .tmu_data = { + { + EXYNOS4412_TMU_DATA, + .type = SOC_ARCH_EXYNOS4412, + .test_mux = EXYNOS4412_MUX_ADDR_VALUE, + }, + }, + .tmu_count = 1, +}; +#endif + +#if defined(CONFIG_SOC_EXYNOS5250) struct exynos_tmu_init_data const exynos5250_default_tmu_data = { .tmu_data = { - { EXYNOS5250_TMU_DATA }, + { + EXYNOS4412_TMU_DATA, + .type = SOC_ARCH_EXYNOS5250, + }, }, .tmu_count = 1, }; diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h index dc7feb51099b..a1ea19d9e0a6 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.h +++ b/drivers/thermal/samsung/exynos_tmu_data.h @@ -95,6 +95,10 @@ #define EXYNOS_MAX_TRIGGER_PER_REG 4 +/* Exynos4412 specific */ +#define EXYNOS4412_MUX_ADDR_VALUE 6 +#define EXYNOS4412_MUX_ADDR_SHIFT 20 + /*exynos5440 specific registers*/ #define EXYNOS5440_TMU_S0_7_TRIM 0x000 #define EXYNOS5440_TMU_S0_7_CTRL 0x020 @@ -138,7 +142,14 @@ extern struct exynos_tmu_init_data const exynos4210_default_tmu_data; #define EXYNOS4210_TMU_DRV_DATA (NULL) #endif -#if (defined(CONFIG_SOC_EXYNOS5250) || defined(CONFIG_SOC_EXYNOS4412)) +#if defined(CONFIG_SOC_EXYNOS4412) +extern struct exynos_tmu_init_data const exynos4412_default_tmu_data; +#define EXYNOS4412_TMU_DRV_DATA (&exynos4412_default_tmu_data) +#else +#define EXYNOS4412_TMU_DRV_DATA (NULL) +#endif + +#if defined(CONFIG_SOC_EXYNOS5250) extern struct exynos_tmu_init_data const exynos5250_default_tmu_data; #define EXYNOS5250_TMU_DRV_DATA (&exynos5250_default_tmu_data) #else diff --git a/drivers/thermal/thermal_hwmon.c b/drivers/thermal/thermal_hwmon.c index eeef0e2498ca..fdb07199d9c2 100644 --- a/drivers/thermal/thermal_hwmon.c +++ b/drivers/thermal/thermal_hwmon.c @@ -159,7 +159,7 @@ int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) INIT_LIST_HEAD(&hwmon->tz_list); strlcpy(hwmon->type, tz->type, THERMAL_NAME_LENGTH); - hwmon->device = hwmon_device_register(&tz->device); + hwmon->device = hwmon_device_register(NULL); if (IS_ERR(hwmon->device)) { result = PTR_ERR(hwmon->device); goto free_mem; diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c index 4f8b9af54a5a..5a47cc8c8f85 100644 --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c @@ -110,6 +110,7 @@ static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal, } else { dev_err(bgp->dev, "Failed to read PCB state. Using defaults\n"); + ret = 0; } } *temp = ti_thermal_hotspot_temperature(tmp, slope, constant); diff --git a/drivers/thermal/x86_pkg_temp_thermal.c b/drivers/thermal/x86_pkg_temp_thermal.c index f36950e4134f..7722cb9d5a80 100644 --- a/drivers/thermal/x86_pkg_temp_thermal.c +++ b/drivers/thermal/x86_pkg_temp_thermal.c @@ -316,18 +316,19 @@ static void pkg_temp_thermal_threshold_work_fn(struct work_struct *work) int phy_id = topology_physical_package_id(cpu); struct phy_dev_entry *phdev = pkg_temp_thermal_get_phy_entry(cpu); bool notify = false; + unsigned long flags; if (!phdev) return; - spin_lock(&pkg_work_lock); + spin_lock_irqsave(&pkg_work_lock, flags); ++pkg_work_cnt; if (unlikely(phy_id > max_phy_id)) { - spin_unlock(&pkg_work_lock); + spin_unlock_irqrestore(&pkg_work_lock, flags); return; } pkg_work_scheduled[phy_id] = 0; - spin_unlock(&pkg_work_lock); + spin_unlock_irqrestore(&pkg_work_lock, flags); enable_pkg_thres_interrupt(); rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val); @@ -397,6 +398,7 @@ static int pkg_temp_thermal_device_add(unsigned int cpu) int thres_count; u32 eax, ebx, ecx, edx; u8 *temp; + unsigned long flags; cpuid(6, &eax, &ebx, &ecx, &edx); thres_count = ebx & 0x07; @@ -420,19 +422,19 @@ static int pkg_temp_thermal_device_add(unsigned int cpu) goto err_ret_unlock; } - spin_lock(&pkg_work_lock); + spin_lock_irqsave(&pkg_work_lock, flags); if (topology_physical_package_id(cpu) > max_phy_id) max_phy_id = topology_physical_package_id(cpu); temp = krealloc(pkg_work_scheduled, (max_phy_id+1) * sizeof(u8), GFP_ATOMIC); if (!temp) { - spin_unlock(&pkg_work_lock); + spin_unlock_irqrestore(&pkg_work_lock, flags); err = -ENOMEM; goto err_ret_free; } pkg_work_scheduled = temp; pkg_work_scheduled[topology_physical_package_id(cpu)] = 0; - spin_unlock(&pkg_work_lock); + spin_unlock_irqrestore(&pkg_work_lock, flags); phy_dev_entry->phys_proc_id = topology_physical_package_id(cpu); phy_dev_entry->first_cpu = cpu;