diff --git a/MAINTAINERS b/MAINTAINERS index 3438384d270c..ffcaf975bed7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8917,61 +8917,14 @@ W: http://pegasus2.sourceforge.net/ S: Maintained F: drivers/net/usb/rtl8150.c -USB SERIAL BELKIN F5U103 DRIVER -M: William Greathouse +USB SERIAL SUBSYSTEM +M: Johan Hovold L: linux-usb@vger.kernel.org S: Maintained -F: drivers/usb/serial/belkin_sa.* - -USB SERIAL CYPRESS M8 DRIVER -M: Lonnie Mendez -L: linux-usb@vger.kernel.org -S: Maintained -W: http://geocities.com/i0xox0i -W: http://firstlight.net/cvs -F: drivers/usb/serial/cypress_m8.* - -USB SERIAL CYBERJACK DRIVER -M: Matthias Bruestle and Harald Welte -W: http://www.reiner-sct.de/support/treiber_cyberjack.php -S: Maintained -F: drivers/usb/serial/cyberjack.c - -USB SERIAL DIGI ACCELEPORT DRIVER -M: Peter Berger -M: Al Borchers -L: linux-usb@vger.kernel.org -S: Maintained -F: drivers/usb/serial/digi_acceleport.c - -USB SERIAL DRIVER -M: Greg Kroah-Hartman -L: linux-usb@vger.kernel.org -S: Supported F: Documentation/usb/usb-serial.txt -F: drivers/usb/serial/generic.c -F: drivers/usb/serial/usb-serial.c +F: drivers/usb/serial/ F: include/linux/usb/serial.h -USB SERIAL EMPEG EMPEG-CAR MARK I/II DRIVER -M: Gary Brubaker -L: linux-usb@vger.kernel.org -S: Maintained -F: drivers/usb/serial/empeg.c - -USB SERIAL KEYSPAN DRIVER -M: Greg Kroah-Hartman -L: linux-usb@vger.kernel.org -S: Maintained -F: drivers/usb/serial/*keyspan* - -USB SERIAL WHITEHEAT DRIVER -M: Support Department -L: linux-usb@vger.kernel.org -W: http://www.connecttech.com -S: Supported -F: drivers/usb/serial/whiteheat* - USB SMSC75XX ETHERNET DRIVER M: Steve Glendinning L: netdev@vger.kernel.org diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index c45f9c0a1b34..b21d553c245b 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -904,6 +904,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) }, /* Crucible Devices */ { USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_Z3X_PID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 1b8af461b522..a7019d1e3058 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1307,3 +1307,9 @@ * Manufacturer: Crucible Technologies */ #define FTDI_CT_COMET_PID 0x8e08 + +/* + * Product: Z3X Box + * Manufacturer: Smart GSM Team + */ +#define FTDI_Z3X_PID 0x0011 diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index bedf8e47713b..1e6de4cd079d 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -4,11 +4,6 @@ * Copyright (C) 2001-2007 Greg Kroah-Hartman (greg@kroah.com) * Copyright (C) 2003 IBM Corp. * - * Copyright (C) 2009, 2013 Frank Schäfer - * - fixes, improvements and documentation for the baud rate encoding methods - * Copyright (C) 2013 Reinhard Max - * - fixes and improvements for the divisor based baud rate encoding method - * * Original driver for 2.2.x by anonymous * * This program is free software; you can redistribute it and/or @@ -134,18 +129,10 @@ MODULE_DEVICE_TABLE(usb, id_table); enum pl2303_type { - type_0, /* H version ? */ - type_1, /* H version ? */ - HX_TA, /* HX(A) / X(A) / TA version */ /* TODO: improve */ - HXD_EA_RA_SA, /* HXD / EA / RA / SA version */ /* TODO: improve */ - TB, /* TB version */ - HX_CLONE, /* Cheap and less functional clone of the HX chip */ + type_0, /* don't know the difference between type 0 and */ + type_1, /* type 1, until someone from prolific tells us... */ + HX, /* HX version of the pl2303 chip */ }; -/* - * NOTE: don't know the difference between type 0 and type 1, - * until someone from Prolific tells us... - * TODO: distinguish between X/HX, TA and HXD, EA, RA, SA variants - */ struct pl2303_serial_private { enum pl2303_type type; @@ -185,7 +172,6 @@ static int pl2303_startup(struct usb_serial *serial) { struct pl2303_serial_private *spriv; enum pl2303_type type = type_0; - char *type_str = "unknown (treating as type_0)"; unsigned char *buf; spriv = kzalloc(sizeof(*spriv), GFP_KERNEL); @@ -198,53 +184,15 @@ static int pl2303_startup(struct usb_serial *serial) return -ENOMEM; } - if (serial->dev->descriptor.bDeviceClass == 0x02) { + if (serial->dev->descriptor.bDeviceClass == 0x02) type = type_0; - type_str = "type_0"; - } else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40) { - /* - * NOTE: The bcdDevice version is the only difference between - * the device descriptors of the X/HX, HXD, EA, RA, SA, TA, TB - */ - if (le16_to_cpu(serial->dev->descriptor.bcdDevice) == 0x300) { - /* Check if the device is a clone */ - pl2303_vendor_read(0x9494, 0, serial, buf); - /* - * NOTE: Not sure if this read is really needed. - * The HX returns 0x00, the clone 0x02, but the Windows - * driver seems to ignore the value and continues. - */ - pl2303_vendor_write(0x0606, 0xaa, serial); - pl2303_vendor_read(0x8686, 0, serial, buf); - if (buf[0] != 0xaa) { - type = HX_CLONE; - type_str = "X/HX clone (limited functionality)"; - } else { - type = HX_TA; - type_str = "X/HX/TA"; - } - pl2303_vendor_write(0x0606, 0x00, serial); - } else if (le16_to_cpu(serial->dev->descriptor.bcdDevice) - == 0x400) { - type = HXD_EA_RA_SA; - type_str = "HXD/EA/RA/SA"; - } else if (le16_to_cpu(serial->dev->descriptor.bcdDevice) - == 0x500) { - type = TB; - type_str = "TB"; - } else { - dev_info(&serial->interface->dev, - "unknown/unsupported device type\n"); - kfree(spriv); - kfree(buf); - return -ENODEV; - } - } else if (serial->dev->descriptor.bDeviceClass == 0x00 - || serial->dev->descriptor.bDeviceClass == 0xFF) { + else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40) + type = HX; + else if (serial->dev->descriptor.bDeviceClass == 0x00) type = type_1; - type_str = "type_1"; - } - dev_dbg(&serial->interface->dev, "device type: %s\n", type_str); + else if (serial->dev->descriptor.bDeviceClass == 0xFF) + type = type_1; + dev_dbg(&serial->interface->dev, "device type: %d\n", type); spriv->type = type; usb_set_serial_data(serial, spriv); @@ -259,10 +207,10 @@ static int pl2303_startup(struct usb_serial *serial) pl2303_vendor_read(0x8383, 0, serial, buf); pl2303_vendor_write(0, 1, serial); pl2303_vendor_write(1, 0, serial); - if (type == type_0 || type == type_1) - pl2303_vendor_write(2, 0x24, serial); - else + if (type == HX) pl2303_vendor_write(2, 0x44, serial); + else + pl2303_vendor_write(2, 0x24, serial); kfree(buf); return 0; @@ -316,174 +264,65 @@ static int pl2303_set_control_lines(struct usb_serial_port *port, u8 value) return retval; } -static int pl2303_baudrate_encode_direct(int baud, enum pl2303_type type, - u8 buf[4]) +static void pl2303_encode_baudrate(struct tty_struct *tty, + struct usb_serial_port *port, + u8 buf[4]) { - /* - * NOTE: Only the values defined in baud_sup are supported ! - * => if unsupported values are set, the PL2303 uses 9600 baud instead - * => HX clones just don't work at unsupported baud rates < 115200 baud, - * for baud rates > 115200 they run at 115200 baud - */ const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600, - 4800, 7200, 9600, 14400, 19200, 28800, 38400, - 57600, 115200, 230400, 460800, 614400, 921600, - 1228800, 2457600, 3000000, 6000000, 12000000 }; - /* - * NOTE: With the exception of type_0/1 devices, the following - * additional baud rates are supported (tested with HX rev. 3A only): - * 110*, 56000*, 128000, 134400, 161280, 201600, 256000*, 268800, - * 403200, 806400. (*: not HX and HX clones) - * - * Maximum values: HXD, TB: 12000000; HX, TA: 6000000; - * type_0+1: 1228800; RA: 921600; HX clones, SA: 115200 - * - * As long as we are not using this encoding method for anything else - * than the type_0+1, HX and HX clone chips, there is no point in - * complicating the code to support them. - */ + 4800, 7200, 9600, 14400, 19200, 28800, 38400, + 57600, 115200, 230400, 460800, 500000, 614400, + 921600, 1228800, 2457600, 3000000, 6000000 }; + + struct usb_serial *serial = port->serial; + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); + int baud; int i; + /* + * NOTE: Only the values defined in baud_sup are supported! + * => if unsupported values are set, the PL2303 seems to use + * 9600 baud (at least my PL2303X always does) + */ + baud = tty_get_baud_rate(tty); + dev_dbg(&port->dev, "baud requested = %d\n", baud); + if (!baud) + return; + /* Set baudrate to nearest supported value */ for (i = 0; i < ARRAY_SIZE(baud_sup); ++i) { if (baud_sup[i] > baud) break; } + if (i == ARRAY_SIZE(baud_sup)) baud = baud_sup[i - 1]; else if (i > 0 && (baud_sup[i] - baud) > (baud - baud_sup[i - 1])) baud = baud_sup[i - 1]; else baud = baud_sup[i]; - /* Respect the chip type specific baud rate limits */ - /* - * FIXME: as long as we don't know how to distinguish between the - * HXD, EA, RA, and SA chip variants, allow the max. value of 12M. - */ - if (type == HX_TA) - baud = min_t(int, baud, 6000000); - else if (type == type_0 || type == type_1) + + /* type_0, type_1 only support up to 1228800 baud */ + if (spriv->type != HX) baud = min_t(int, baud, 1228800); - else if (type == HX_CLONE) - baud = min_t(int, baud, 115200); - /* Direct (standard) baud rate encoding method */ - put_unaligned_le32(baud, buf); - return baud; -} - -static int pl2303_baudrate_encode_divisor(int baud, enum pl2303_type type, - u8 buf[4]) -{ - /* - * Divisor based baud rate encoding method - * - * NOTE: HX clones do NOT support this method. - * It's not clear if the type_0/1 chips support it. - * - * divisor = 12MHz * 32 / baudrate = 2^A * B - * - * with - * - * A = buf[1] & 0x0e - * B = buf[0] + (buf[1] & 0x01) << 8 - * - * Special cases: - * => 8 < B < 16: device seems to work not properly - * => B <= 8: device uses the max. value B = 512 instead - */ - unsigned int A, B; - - /* - * NOTE: The Windows driver allows maximum baud rates of 110% of the - * specified maximium value. - * Quick tests with early (2004) HX (rev. A) chips suggest, that even - * higher baud rates (up to the maximum of 24M baud !) are working fine, - * but that should really be tested carefully in "real life" scenarios - * before removing the upper limit completely. - * Baud rates smaller than the specified 75 baud are definitely working - * fine. - */ - if (type == type_0 || type == type_1) - baud = min_t(int, baud, 1228800 * 1.1); - else if (type == HX_TA) - baud = min_t(int, baud, 6000000 * 1.1); - else if (type == HXD_EA_RA_SA) - /* HXD, EA: 12Mbps; RA: 1Mbps; SA: 115200 bps */ - /* - * FIXME: as long as we don't know how to distinguish between - * these chip variants, allow the max. of these values - */ - baud = min_t(int, baud, 12000000 * 1.1); - else if (type == TB) - baud = min_t(int, baud, 12000000 * 1.1); - /* Determine factors A and B */ - A = 0; - B = 12000000 * 32 / baud; /* 12MHz */ - B <<= 1; /* Add one bit for rounding */ - while (B > (512 << 1) && A <= 14) { - A += 2; - B >>= 2; - } - if (A > 14) { /* max. divisor = min. baudrate reached */ - A = 14; - B = 512; - /* => ~45.78 baud */ + if (baud <= 115200) { + put_unaligned_le32(baud, buf); } else { - B = (B + 1) >> 1; /* Round the last bit */ - } - /* Handle special cases */ - if (B == 512) - B = 0; /* also: 1 to 8 */ - else if (B < 16) /* - * NOTE: With the current algorithm this happens - * only for A=0 and means that the min. divisor - * (respectively: the max. baudrate) is reached. + * Apparently the formula for higher speeds is: + * baudrate = 12M * 32 / (2^buf[1]) / buf[0] */ - B = 16; /* => 24 MBaud */ - /* Encode the baud rate */ - buf[3] = 0x80; /* Select divisor encoding method */ - buf[2] = 0; - buf[1] = (A & 0x0e); /* A */ - buf[1] |= ((B & 0x100) >> 8); /* MSB of B */ - buf[0] = B & 0xff; /* 8 LSBs of B */ - /* Calculate the actual/resulting baud rate */ - if (B <= 8) - B = 512; - baud = 12000000 * 32 / ((1 << A) * B); + unsigned tmp = 12000000 * 32 / baud; + buf[3] = 0x80; + buf[2] = 0; + buf[1] = (tmp >= 256); + while (tmp >= 256) { + tmp >>= 2; + buf[1] <<= 1; + } + buf[0] = tmp; + } - return baud; -} - -static void pl2303_encode_baudrate(struct tty_struct *tty, - struct usb_serial_port *port, - enum pl2303_type type, - u8 buf[4]) -{ - int baud; - - baud = tty_get_baud_rate(tty); - dev_dbg(&port->dev, "baud requested = %d\n", baud); - if (!baud) - return; - /* - * There are two methods for setting/encoding the baud rate - * 1) Direct method: encodes the baud rate value directly - * => supported by all chip types - * 2) Divisor based method: encodes a divisor to a base value (12MHz*32) - * => not supported by HX clones (and likely type_0/1 chips) - * - * NOTE: Although the divisor based baud rate encoding method is much - * more flexible, some of the standard baud rate values can not be - * realized exactly. But the difference is very small (max. 0.2%) and - * the device likely uses the same baud rate generator for both methods - * so that there is likley no difference. - */ - if (type == type_0 || type == type_1 || type == HX_CLONE) - baud = pl2303_baudrate_encode_direct(baud, type, buf); - else - baud = pl2303_baudrate_encode_divisor(baud, type, buf); /* Save resulting baud rate */ tty_encode_baud_rate(tty, baud, baud); dev_dbg(&port->dev, "baud set = %d\n", baud); @@ -540,8 +379,8 @@ static void pl2303_set_termios(struct tty_struct *tty, dev_dbg(&port->dev, "data bits = %d\n", buf[6]); } - /* For reference: buf[0]:buf[3] baud rate value */ - pl2303_encode_baudrate(tty, port, spriv->type, buf); + /* For reference buf[0]:buf[3] baud rate value */ + pl2303_encode_baudrate(tty, port, &buf[0]); /* For reference buf[4]=0 is 1 stop bits */ /* For reference buf[4]=1 is 1.5 stop bits */ @@ -618,10 +457,10 @@ static void pl2303_set_termios(struct tty_struct *tty, dev_dbg(&port->dev, "0xa1:0x21:0:0 %d - %7ph\n", i, buf); if (C_CRTSCTS(tty)) { - if (spriv->type == type_0 || spriv->type == type_1) - pl2303_vendor_write(0x0, 0x41, serial); - else + if (spriv->type == HX) pl2303_vendor_write(0x0, 0x61, serial); + else + pl2303_vendor_write(0x0, 0x41, serial); } else { pl2303_vendor_write(0x0, 0x0, serial); } @@ -658,7 +497,7 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) struct pl2303_serial_private *spriv = usb_get_serial_data(serial); int result; - if (spriv->type == type_0 || spriv->type == type_1) { + if (spriv->type != HX) { usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); } else { @@ -833,7 +672,6 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state) result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), BREAK_REQUEST, BREAK_REQUEST_TYPE, state, 0, NULL, 0, 100); - /* NOTE: HX clones don't support sending breaks, -EPIPE is returned */ if (result) dev_err(&port->dev, "error sending break = %d\n", result); }