redonkable
/
remarkable-linux
1
0
Fork 0
Code Releases Activity

PCI updates for v3.13: 

PCI device hotplug
     - Move device_del() from pci_stop_dev() to pci_destroy_dev() (Rafael J. Wysocki)
 
   Host bridge drivers
     - Update maintainers for DesignWare, i.MX6, Armada, R-Car (Bjorn Helgaas)
     - mvebu: Return 'unsupported' for Interrupt Line and Interrupt Pin (Jason Gunthorpe)
 
   Miscellaneous
     - Avoid unnecessary CPU switch when calling .probe() (Alexander Duyck)
     - Revert "workqueue: allow work_on_cpu() to be called recursively" (Bjorn Helgaas)
     - Disable Bus Master only on kexec reboot (Khalid Aziz)
     - Omit PCI ID macro strings to shorten quirk names for LTO (Michal Marek)
 
  MAINTAINERS                  | 33 +++++++++++++++++++++++++++++++++
  drivers/pci/host/pci-mvebu.c |  5 +++++
  drivers/pci/pci-driver.c     | 38 ++++++++++++++++++++++++++++++--------
  drivers/pci/remove.c         |  4 +++-
  include/linux/kexec.h        |  3 +++
  include/linux/pci.h          | 30 +++++++++++++++---------------
  kernel/kexec.c               |  4 ++++
  kernel/workqueue.c           | 32 ++++++++++----------------------
  8 files changed, 103 insertions(+), 46 deletions(-)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSrLDLAAoJEFmIoMA60/r8JO4P/iakGDezwXcd9YTbdaq/NmEK
 31JtBao9rJNSUXpFGaFKGm99A479QNb+Fo1o5NaysyGbcAA2W0HeCkaee13hpw2D
 l3wvzJRoEwqVySOzMwlGsxxhYuvGiZ2WVALNkwBzwyCiYtypNnUtGNCSp/3J6XKp
 2ZUjoagyixdS4oYoR4irZucPBWwzW89Gx4oJ0rBttNVsXjiT1D2OzYDYTuxMyb2E
 ZjXJqTUYzfwiFxqKPrGOabUPD9GX3EWaFmu01FLlsSznPZkk9yJR3/eq6I6utp/E
 WSpP+7v3jnPHjZVky1FdHaP5wqurtNRsiWBQVyNYF+M5WofKA1hGA+niJDEB/pVL
 vE74fJfZzpET1jlZR+7Z5qHPxW2A8Q2ARn74A42DYLQGmJEh7VdARcayV1E4diRH
 DzEnhf33b9bwIC1Q0cESWZ5RH4r2Xbjg0a1qoVQYi5VEJEMWXID3Ofk64Bd9QOz4
 oLZ27V7clurD+gNarch/zgpd9LVIHLFriR2YWPpA0Iwy9EjueH8GsiOS3NqDn2SQ
 sQg5utE4vdnix4VrCvvbufAr3kJngndtuj/s7I3lZqi7nCyS+jeFFvMUd9h3MUqZ
 rs1IN1/qeTBBNi2dtmcKDN2ItahCoBhTI37JRaijZwe+B5m6mTe049it+E0SZPI2
 IqLOYWL4ggT0se/cMXld
 =Edvk
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "PCI device hotplug
    - Move device_del() from pci_stop_dev() to pci_destroy_dev() (Rafael
      Wysocki)

  Host bridge drivers
    - Update maintainers for DesignWare, i.MX6, Armada, R-Car (Bjorn
      Helgaas)
    - mvebu: Return 'unsupported' for Interrupt Line and Interrupt Pin
      (Jason Gunthorpe)

  Miscellaneous
    - Avoid unnecessary CPU switch when calling .probe() (Alexander
      Duyck)
    - Revert "workqueue: allow work_on_cpu() to be called recursively"
      (Bjorn Helgaas)
    - Disable Bus Master only on kexec reboot (Khalid Aziz)
    - Omit PCI ID macro strings to shorten quirk names for LTO (Michal
      Marek)"

* tag 'pci-v3.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers
  PCI: Disable Bus Master only on kexec reboot
  PCI: mvebu: Return 'unsupported' for Interrupt Line and Interrupt Pin
  PCI: Omit PCI ID macro strings to shorten quirk names
  PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev()
  Revert "workqueue: allow work_on_cpu() to be called recursively"
  PCI: Avoid unnecessary CPU switch when calling driver .probe() method
wifi-calibration
Linus Torvalds 2013-12-15 11:45:27 -08:00
parent b5745c5962 f0b75693cb
commit 9199c4caa1
8 changed files with 103 additions and 46 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

33
MAINTAINERS
View File

@ -6465,19 +6465,52 @@ F: drivers/pci/
F: include/linux/pci*
F: arch/x86/pci/
PCI DRIVER FOR IMX6
M: Richard Zhu <r65037@freescale.com>
M: Shawn Guo <shawn.guo@linaro.org>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: drivers/pci/host/*imx6*
PCI DRIVER FOR MVEBU (Marvell Armada 370 and Armada XP SOC support)
M: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
M: Jason Cooper <jason@lakedaemon.net>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: drivers/pci/host/*mvebu*
PCI DRIVER FOR NVIDIA TEGRA
M: Thierry Reding <thierry.reding@gmail.com>
L: linux-tegra@vger.kernel.org
L: linux-pci@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
F: drivers/pci/host/pci-tegra.c
PCI DRIVER FOR RENESAS R-CAR
M: Simon Horman <horms@verge.net.au>
L: linux-pci@vger.kernel.org
L: linux-sh@vger.kernel.org
S: Maintained
F: drivers/pci/host/*rcar*
PCI DRIVER FOR SAMSUNG EXYNOS
M: Jingoo Han <jg1.han@samsung.com>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
S: Maintained
F: drivers/pci/host/pci-exynos.c
PCI DRIVER FOR SYNOPSIS DESIGNWARE
M: Mohit Kumar <mohit.kumar@st.com>
M: Jingoo Han <jg1.han@samsung.com>
L: linux-pci@vger.kernel.org
S: Maintained
F: drivers/pci/host/*designware*
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: linux-pcmcia@lists.infradead.org

5
drivers/pci/host/pci-mvebu.c
View File

@ -447,6 +447,11 @@ static int mvebu_sw_pci_bridge_read(struct mvebu_pcie_port *port,
*value = 0;
break;
case PCI_INTERRUPT_LINE:
/* LINE PIN MIN_GNT MAX_LAT */
*value = 0;
break;
default:
*value = 0xffffffff;
return PCIBIOS_BAD_REGISTER_NUMBER;

38
drivers/pci/pci-driver.c
View File

@ -19,6 +19,7 @@
#include <linux/cpu.h>
#include <linux/pm_runtime.h>
#include <linux/suspend.h>
#include <linux/kexec.h>
#include "pci.h"
struct pci_dynid {
@ -288,12 +289,27 @@ static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev,
int error, node;
struct drv_dev_and_id ddi = { drv, dev, id };
/* Execute driver initialization on node where the device's
bus is attached to. This way the driver likely allocates
its local memory on the right node without any need to
change it. */
/*
* Execute driver initialization on node where the device is
* attached. This way the driver likely allocates its local memory
* on the right node.
*/
node = dev_to_node(&dev->dev);
if (node >= 0) {
/*
* On NUMA systems, we are likely to call a PF probe function using
* work_on_cpu(). If that probe calls pci_enable_sriov() (which
* adds the VF devices via pci_bus_add_device()), we may re-enter
* this function to call the VF probe function. Calling
* work_on_cpu() again will cause a lockdep warning. Since VFs are
* always on the same node as the PF, we can work around this by
* avoiding work_on_cpu() when we're already on the correct node.
*
* Preemption is enabled, so it's theoretically unsafe to use
* numa_node_id(), but even if we run the probe function on the
* wrong node, it should be functionally correct.
*/
if (node >= 0 && node != numa_node_id()) {
int cpu;
get_online_cpus();
@ -305,6 +321,7 @@ static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev,
put_online_cpus();
} else
error = local_pci_probe(&ddi);
return error;
}
@ -399,12 +416,17 @@ static void pci_device_shutdown(struct device *dev)
pci_msi_shutdown(pci_dev);
pci_msix_shutdown(pci_dev);
#ifdef CONFIG_KEXEC
/*
* Turn off Bus Master bit on the device to tell it to not
* continue to do DMA. Don't touch devices in D3cold or unknown states.
* If this is a kexec reboot, turn off Bus Master bit on the
* device to tell it to not continue to do DMA. Don't touch
* devices in D3cold or unknown states.
* If it is not a kexec reboot, firmware will hit the PCI
* devices with big hammer and stop their DMA any way.
*/
if (pci_dev->current_state <= PCI_D3hot)
if (kexec_in_progress && (pci_dev->current_state <= PCI_D3hot))
pci_clear_master(pci_dev);
#endif
}
#ifdef CONFIG_PM

4
drivers/pci/remove.c
View File

@ -24,7 +24,7 @@ static void pci_stop_dev(struct pci_dev *dev)
if (dev->is_added) {
pci_proc_detach_device(dev);
pci_remove_sysfs_dev_files(dev);
device_del(&dev->dev);
device_release_driver(&dev->dev);
dev->is_added = 0;
}
@ -34,6 +34,8 @@ static void pci_stop_dev(struct pci_dev *dev)
static void pci_destroy_dev(struct pci_dev *dev)
{
device_del(&dev->dev);
down_write(&pci_bus_sem);
list_del(&dev->bus_list);
up_write(&pci_bus_sem);

3
include/linux/kexec.h
View File

@ -198,6 +198,9 @@ extern u32 vmcoreinfo_note[VMCOREINFO_NOTE_SIZE/4];
extern size_t vmcoreinfo_size;
extern size_t vmcoreinfo_max_size;
/* flag to track if kexec reboot is in progress */
extern bool kexec_in_progress;
int __init parse_crashkernel(char *cmdline, unsigned long long system_ram,
unsigned long long *crash_size, unsigned long long *crash_base);
int parse_crashkernel_high(char *cmdline, unsigned long long system_ram,

30
include/linux/pci.h
View File

@ -1567,65 +1567,65 @@ enum pci_fixup_pass {
/* Anonymous variables would be nice... */
#define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, class, \
class_shift, hook) \
static const struct pci_fixup __pci_fixup_##name __used \
static const struct pci_fixup __PASTE(__pci_fixup_##name,__LINE__) __used \
__attribute__((__section__(#section), aligned((sizeof(void *))))) \
= { vendor, device, class, class_shift, hook };
#define DECLARE_PCI_FIXUP_CLASS_EARLY(vendor, device, class, \
class_shift, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early, \
vendor##device##hook, vendor, device, class, class_shift, hook)
hook, vendor, device, class, class_shift, hook)
#define DECLARE_PCI_FIXUP_CLASS_HEADER(vendor, device, class, \
class_shift, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header, \
vendor##device##hook, vendor, device, class, class_shift, hook)
hook, vendor, device, class, class_shift, hook)
#define DECLARE_PCI_FIXUP_CLASS_FINAL(vendor, device, class, \
class_shift, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final, \
vendor##device##hook, vendor, device, class, class_shift, hook)
hook, vendor, device, class, class_shift, hook)
#define DECLARE_PCI_FIXUP_CLASS_ENABLE(vendor, device, class, \
class_shift, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable, \
vendor##device##hook, vendor, device, class, class_shift, hook)
hook, vendor, device, class, class_shift, hook)
#define DECLARE_PCI_FIXUP_CLASS_RESUME(vendor, device, class, \
class_shift, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \
resume##vendor##device##hook, vendor, device, class, \
resume##hook, vendor, device, class, \
class_shift, hook)
#define DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(vendor, device, class, \
class_shift, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early, \
resume_early##vendor##device##hook, vendor, device, \
resume_early##hook, vendor, device, \
class, class_shift, hook)
#define DECLARE_PCI_FIXUP_CLASS_SUSPEND(vendor, device, class, \
class_shift, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \
suspend##vendor##device##hook, vendor, device, class, \
suspend##hook, vendor, device, class, \
class_shift, hook)
#define DECLARE_PCI_FIXUP_EARLY(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early, \
vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook)
hook, vendor, device, PCI_ANY_ID, 0, hook)
#define DECLARE_PCI_FIXUP_HEADER(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header, \
vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook)
hook, vendor, device, PCI_ANY_ID, 0, hook)
#define DECLARE_PCI_FIXUP_FINAL(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final, \
vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook)
hook, vendor, device, PCI_ANY_ID, 0, hook)
#define DECLARE_PCI_FIXUP_ENABLE(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable, \
vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook)
hook, vendor, device, PCI_ANY_ID, 0, hook)
#define DECLARE_PCI_FIXUP_RESUME(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \
resume##vendor##device##hook, vendor, device, \
resume##hook, vendor, device, \
PCI_ANY_ID, 0, hook)
#define DECLARE_PCI_FIXUP_RESUME_EARLY(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early, \
resume_early##vendor##device##hook, vendor, device, \
resume_early##hook, vendor, device, \
PCI_ANY_ID, 0, hook)
#define DECLARE_PCI_FIXUP_SUSPEND(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \
suspend##vendor##device##hook, vendor, device, \
suspend##hook, vendor, device, \
PCI_ANY_ID, 0, hook)
#ifdef CONFIG_PCI_QUIRKS

4
kernel/kexec.c
View File

@ -47,6 +47,9 @@ u32 vmcoreinfo_note[VMCOREINFO_NOTE_SIZE/4];
size_t vmcoreinfo_size;
size_t vmcoreinfo_max_size = sizeof(vmcoreinfo_data);
/* Flag to indicate we are going to kexec a new kernel */
bool kexec_in_progress = false;
/* Location of the reserved area for the crash kernel */
struct resource crashk_res = {
.name = "Crash kernel",
@ -1675,6 +1678,7 @@ int kernel_kexec(void)
} else
#endif
{
kexec_in_progress = true;
kernel_restart_prepare(NULL);
printk(KERN_EMERG "Starting new kernel\n");
machine_shutdown();

32
kernel/workqueue.c
View File

@ -2851,19 +2851,6 @@ already_gone:
return false;
}
static bool __flush_work(struct work_struct *work)
{
struct wq_barrier barr;
if (start_flush_work(work, &barr)) {
wait_for_completion(&barr.done);
destroy_work_on_stack(&barr.work);
return true;
} else {
return false;
}
}
/**
* flush_work - wait for a work to finish executing the last queueing instance
* @work: the work to flush
@ -2877,10 +2864,18 @@ static bool __flush_work(struct work_struct *work)
*/
bool flush_work(struct work_struct *work)
{
struct wq_barrier barr;
lock_map_acquire(&work->lockdep_map);
lock_map_release(&work->lockdep_map);
return __flush_work(work);
if (start_flush_work(work, &barr)) {
wait_for_completion(&barr.done);
destroy_work_on_stack(&barr.work);
return true;
} else {
return false;
}
}
EXPORT_SYMBOL_GPL(flush_work);
@ -4832,14 +4827,7 @@ long work_on_cpu(int cpu, long (*fn)(void *), void *arg)
INIT_WORK_ONSTACK(&wfc.work, work_for_cpu_fn);
schedule_work_on(cpu, &wfc.work);
/*
* The work item is on-stack and can't lead to deadlock through
* flushing. Use __flush_work() to avoid spurious lockdep warnings
* when work_on_cpu()s are nested.
*/
__flush_work(&wfc.work);
flush_work(&wfc.work);
return wfc.ret;
}
EXPORT_SYMBOL_GPL(work_on_cpu);