regulator: axp20x: Remove voltage readout support for switch regulators
Switch-type regulators, such as DC1SW on AXP22X, are a secondary output from DCDC1. They are just an on/off switch, and the driver should not try to read its voltage directly from the DCDC1 control registers. Instead, the core will pass down the voltage from the regulator supply chain. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
92e963f50f
commit
94c39041ae
|
@ -78,8 +78,7 @@
|
|||
.ops = &axp20x_ops, \
|
||||
}
|
||||
|
||||
#define AXP_DESC_SW(_family, _id, _match, _supply, _min, _max, _step, _vreg, \
|
||||
_vmask, _ereg, _emask) \
|
||||
#define AXP_DESC_SW(_family, _id, _match, _supply, _ereg, _emask) \
|
||||
[_family##_##_id] = { \
|
||||
.name = #_id, \
|
||||
.supply_name = (_supply), \
|
||||
|
@ -87,12 +86,7 @@
|
|||
.regulators_node = of_match_ptr("regulators"), \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.id = _family##_##_id, \
|
||||
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
|
||||
.owner = THIS_MODULE, \
|
||||
.min_uV = (_min) * 1000, \
|
||||
.uV_step = (_step) * 1000, \
|
||||
.vsel_reg = (_vreg), \
|
||||
.vsel_mask = (_vmask), \
|
||||
.enable_reg = (_ereg), \
|
||||
.enable_mask = (_emask), \
|
||||
.ops = &axp20x_ops_sw, \
|
||||
|
@ -160,8 +154,6 @@ static struct regulator_ops axp20x_ops = {
|
|||
};
|
||||
|
||||
static struct regulator_ops axp20x_ops_sw = {
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
|
@ -196,8 +188,8 @@ static const struct regulator_desc axp22x_regulators[] = {
|
|||
AXP_DESC(AXP22X, DCDC5, "dcdc5", "vin5", 1000, 2550, 50,
|
||||
AXP22X_DCDC5_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(5)),
|
||||
/* secondary switchable output of DCDC1 */
|
||||
AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", NULL, 1600, 3400, 100,
|
||||
AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(7)),
|
||||
AXP_DESC_SW(AXP22X, DC1SW, "dc1sw", NULL, AXP22X_PWR_OUT_CTRL2,
|
||||
BIT(7)),
|
||||
/* LDO regulator internally chained to DCDC5 */
|
||||
AXP_DESC(AXP22X, DC5LDO, "dc5ldo", NULL, 700, 1400, 100,
|
||||
AXP22X_DC5LDO_V_OUT, 0x7, AXP22X_PWR_OUT_CTRL1, BIT(0)),
|
||||
|
|
Loading…
Reference in a new issue