1
0
Fork 0

hwmon: (pmbus) Improve support for paged fans

So far, it seemed like fans would either all be in page 0, or that
there would be one page per fan.

Turns out this was a wrong assumption. There is at least one PMBus
fan controller which supports three pages with four fans each.
Update code to handle this situation.

Reported-by: Greg Schnorr <gschnorr@cisco.com>
Tested-by: Greg Schnorr <gschnorr@cisco.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Greg Schnorr <gschnorr@cisco.com>
wifi-calibration
Guenter Roeck 2011-03-05 07:55:10 -08:00
parent 83274c68a3
commit 954df6763c
1 changed files with 40 additions and 30 deletions

View File

@ -58,12 +58,10 @@
#define PMBUS_MAX_INPUT_LABELS 4 /* vin, vcap, iin, pin */
/*
* status, status_vout, status_iout, status_fans, and status_temp
* are paged. status_input and status_fan34 are unpaged.
* status_fan34 is a special case to handle a second set of fans
* on page 0.
* status, status_vout, status_iout, status_fans, status_fan34, and status_temp
* are paged. status_input is unpaged.
*/
#define PB_NUM_STATUS_REG (PMBUS_PAGES * 5 + 2)
#define PB_NUM_STATUS_REG (PMBUS_PAGES * 6 + 1)
/*
* Index into status register array, per status register group
@ -73,7 +71,7 @@
#define PB_STATUS_IOUT_BASE (PB_STATUS_VOUT_BASE + PMBUS_PAGES)
#define PB_STATUS_FAN_BASE (PB_STATUS_IOUT_BASE + PMBUS_PAGES)
#define PB_STATUS_FAN34_BASE (PB_STATUS_FAN_BASE + PMBUS_PAGES)
#define PB_STATUS_INPUT_BASE (PB_STATUS_FAN34_BASE + 1)
#define PB_STATUS_INPUT_BASE (PB_STATUS_FAN34_BASE + PMBUS_PAGES)
#define PB_STATUS_TEMP_BASE (PB_STATUS_INPUT_BASE + 1)
struct pmbus_sensor {
@ -327,14 +325,17 @@ static struct pmbus_data *pmbus_update_device(struct device *dev)
= pmbus_get_status(client, i, PMBUS_STATUS_FAN_12);
}
for (i = 0; i < info->pages; i++) {
if (!(info->func[i] & PMBUS_HAVE_STATUS_FAN34))
continue;
data->status[PB_STATUS_FAN34_BASE + i]
= pmbus_get_status(client, i, PMBUS_STATUS_FAN_34);
}
if (info->func[0] & PMBUS_HAVE_STATUS_INPUT)
data->status[PB_STATUS_INPUT_BASE]
= pmbus_get_status(client, 0, PMBUS_STATUS_INPUT);
if (info->func[0] & PMBUS_HAVE_STATUS_FAN34)
data->status[PB_STATUS_FAN34_BASE]
= pmbus_get_status(client, 0, PMBUS_STATUS_FAN_34);
for (i = 0; i < data->num_sensors; i++) {
struct pmbus_sensor *sensor = &data->sensors[i];
@ -817,6 +818,20 @@ static const int pmbus_fan_status_registers[] = {
PMBUS_STATUS_FAN_34
};
static const u32 pmbus_fan_flags[] = {
PMBUS_HAVE_FAN12,
PMBUS_HAVE_FAN12,
PMBUS_HAVE_FAN34,
PMBUS_HAVE_FAN34
};
static const u32 pmbus_fan_status_flags[] = {
PMBUS_HAVE_STATUS_FAN12,
PMBUS_HAVE_STATUS_FAN12,
PMBUS_HAVE_STATUS_FAN34,
PMBUS_HAVE_STATUS_FAN34
};
/*
* Determine maximum number of sensors, booleans, and labels.
* To keep things simple, only make a rough high estimate.
@ -848,17 +863,12 @@ static void pmbus_find_max_attr(struct i2c_client *client,
max_labels++;
}
if (info->func[page] & PMBUS_HAVE_FAN12) {
if (page == 0) {
max_sensors +=
ARRAY_SIZE(pmbus_fan_registers) *
PMBUS_MAX_SENSORS_PER_FAN;
max_booleans +=
ARRAY_SIZE(pmbus_fan_registers) *
PMBUS_MAX_BOOLEANS_PER_FAN;
} else {
max_sensors += PMBUS_MAX_SENSORS_PER_FAN;
max_booleans += PMBUS_MAX_BOOLEANS_PER_FAN;
}
max_sensors += 2 * PMBUS_MAX_SENSORS_PER_FAN;
max_booleans += 2 * PMBUS_MAX_BOOLEANS_PER_FAN;
}
if (info->func[page] & PMBUS_HAVE_FAN34) {
max_sensors += 2 * PMBUS_MAX_SENSORS_PER_FAN;
max_booleans += 2 * PMBUS_MAX_BOOLEANS_PER_FAN;
}
if (info->func[page] & PMBUS_HAVE_TEMP) {
if (page == 0) {
@ -1365,15 +1375,14 @@ static void pmbus_find_attributes(struct i2c_client *client,
*/
in_index = 1;
for (page = 0; page < info->pages; page++) {
int fans, f;
int f;
if (!(info->func[page] & PMBUS_HAVE_FAN12))
continue;
fans = page ? 1 : ARRAY_SIZE(pmbus_fan_registers);
for (f = 0; f < fans; f++) {
for (f = 0; f < ARRAY_SIZE(pmbus_fan_registers); f++) {
int regval;
if (!(info->func[page] & pmbus_fan_flags[f]))
break;
if (!pmbus_check_word_register(client, page,
pmbus_fan_registers[f])
|| !pmbus_check_byte_register(client, page,
@ -1399,12 +1408,13 @@ static void pmbus_find_attributes(struct i2c_client *client,
* Each fan status register covers multiple fans,
* so we have to do some magic.
*/
if (pmbus_check_byte_register
(client, page, pmbus_fan_status_registers[f])) {
if ((info->func[page] & pmbus_fan_status_flags[f]) &&
pmbus_check_byte_register(client,
page, pmbus_fan_status_registers[f])) {
int base;
if (f > 1) /* fan 3, 4 */
base = PB_STATUS_FAN34_BASE;
base = PB_STATUS_FAN34_BASE + page;
else
base = PB_STATUS_FAN_BASE + page;
pmbus_add_boolean_reg(data, "fan", "alarm",