ARM: dts: lpc32xx: phy3250: add NAND partitions device node

To declare MTD OF partitions NAND controller device node should have
a special 'partitions' subnode, the change removes a debug message
from mtd/ofpart on boot:

  nxp_lpc3220_slc: 'partitions' subnode not found on /ahb/flash@20020000.
  Trying to parse direct subnodes as partitions.

Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
This commit is contained in:
Vladimir Zapolskiy 2016-04-27 00:10:33 +03:00
parent 6101f4bcb3
commit 9cfde0a1fe

View file

@ -136,8 +136,6 @@
/* 64MB Flash via SLC NAND controller */
&slc {
#address-cells = <1>;
#size-cells = <1>;
status = "okay";
nxp,wdr-clks = <14>;
@ -151,31 +149,37 @@
nand-on-flash-bbt;
gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
mtd0@00000000 {
label = "phy3250-boot";
reg = <0x00000000 0x00064000>;
read-only;
};
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
mtd1@00064000 {
label = "phy3250-uboot";
reg = <0x00064000 0x00190000>;
read-only;
};
mtd0@00000000 {
label = "phy3250-boot";
reg = <0x00000000 0x00064000>;
read-only;
};
mtd2@001f4000 {
label = "phy3250-ubt-prms";
reg = <0x001f4000 0x00010000>;
};
mtd1@00064000 {
label = "phy3250-uboot";
reg = <0x00064000 0x00190000>;
read-only;
};
mtd3@00204000 {
label = "phy3250-kernel";
reg = <0x00204000 0x00400000>;
};
mtd2@001f4000 {
label = "phy3250-ubt-prms";
reg = <0x001f4000 0x00010000>;
};
mtd4@00604000 {
label = "phy3250-rootfs";
reg = <0x00604000 0x039fc000>;
mtd3@00204000 {
label = "phy3250-kernel";
reg = <0x00204000 0x00400000>;
};
mtd4@00604000 {
label = "phy3250-rootfs";
reg = <0x00604000 0x039fc000>;
};
};
};