MIPS: Loongson1B: Some updates/fixes for LS1B
- Add DMA device - Add NAND device - Add GPIO device - Add LED device - Update the defconfig and rename it to loongson1b_defconfig - Fix ioremap size - Other minor fixes Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Richard Weinberger <richard@nod.at> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: dmaengine@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-mtd@lists.infradead.org Patchwork: https://patchwork.linux-mips.org/patch/13033/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
parent
0d61ed17dd
commit
9ec88b60cb
|
@ -1387,6 +1387,8 @@ config CPU_LOONGSON1B
|
|||
bool "Loongson 1B"
|
||||
depends on SYS_HAS_CPU_LOONGSON1B
|
||||
select CPU_LOONGSON1
|
||||
select ARCH_WANT_OPTIONAL_GPIOLIB
|
||||
select LEDS_GPIO_REGISTER
|
||||
help
|
||||
The Loongson 1B is a 32-bit SoC, which implements the MIPS32
|
||||
release 2 instruction set.
|
||||
|
|
|
@ -1,19 +1,17 @@
|
|||
CONFIG_MACH_LOONGSON32=y
|
||||
CONFIG_PREEMPT=y
|
||||
# CONFIG_SECCOMP is not set
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
CONFIG_KERNEL_XZ=y
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_BSD_PROCESS_ACCT=y
|
||||
CONFIG_BSD_PROCESS_ACCT_V3=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=16
|
||||
CONFIG_NAMESPACES=y
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_RD_BZIP2=y
|
||||
CONFIG_RD_LZMA=y
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_EXPERT=y
|
||||
CONFIG_PERF_EVENTS=y
|
||||
# CONFIG_COMPAT_BRK is not set
|
||||
|
@ -41,6 +39,12 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
|||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
# CONFIG_STANDALONE is not set
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_LOONGSON1=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_SCSI=m
|
||||
# CONFIG_SCSI_PROC_FS is not set
|
||||
|
@ -48,7 +52,6 @@ CONFIG_BLK_DEV_SD=m
|
|||
# CONFIG_SCSI_LOWLEVEL is not set
|
||||
CONFIG_NETDEVICES=y
|
||||
# CONFIG_NET_VENDOR_BROADCOM is not set
|
||||
# CONFIG_NET_VENDOR_CHELSIO is not set
|
||||
# CONFIG_NET_VENDOR_INTEL is not set
|
||||
# CONFIG_NET_VENDOR_MARVELL is not set
|
||||
# CONFIG_NET_VENDOR_MICREL is not set
|
||||
|
@ -56,7 +59,6 @@ CONFIG_NETDEVICES=y
|
|||
# CONFIG_NET_VENDOR_SEEQ is not set
|
||||
# CONFIG_NET_VENDOR_SMSC is not set
|
||||
CONFIG_STMMAC_ETH=y
|
||||
CONFIG_STMMAC_DA=y
|
||||
# CONFIG_NET_VENDOR_WIZNET is not set
|
||||
# CONFIG_WLAN is not set
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
|
@ -69,18 +71,25 @@ CONFIG_LEGACY_PTY_COUNT=8
|
|||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_LOONGSON1=y
|
||||
# CONFIG_HWMON is not set
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_USB_HID=m
|
||||
CONFIG_HID_GENERIC=m
|
||||
CONFIG_USB_HID=m
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_EHCI_HCD_PLATFORM=y
|
||||
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
|
||||
CONFIG_USB_EHCI_HCD_PLATFORM=y
|
||||
CONFIG_USB_STORAGE=m
|
||||
CONFIG_USB_SERIAL=m
|
||||
CONFIG_USB_SERIAL_PL2303=m
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_LOONGSON1=y
|
||||
# CONFIG_IOMMU_SUPPORT is not set
|
||||
|
@ -96,15 +105,21 @@ CONFIG_VFAT_FS=y
|
|||
CONFIG_PROC_KCORE=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_TMPFS_POSIX_ACL=y
|
||||
# CONFIG_MISC_FILESYSTEMS is not set
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
|
||||
CONFIG_UBIFS_ATIME_SUPPORT=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NLS_CODEPAGE_437=m
|
||||
CONFIG_NLS_ISO8859_1=m
|
||||
CONFIG_DYNAMIC_DEBUG=y
|
||||
# CONFIG_ENABLE_WARN_DEPRECATED is not set
|
||||
# CONFIG_ENABLE_MUST_CHECK is not set
|
||||
CONFIG_DEBUG_FS=y
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
# CONFIG_SCHED_DEBUG is not set
|
||||
# CONFIG_DEBUG_PREEMPT is not set
|
||||
# CONFIG_FTRACE is not set
|
||||
# CONFIG_EARLY_PRINTK is not set
|
||||
# CONFIG_CRYPTO_ECHAINIV is not set
|
||||
# CONFIG_CRYPTO_HW is not set
|
|
@ -9,7 +9,6 @@
|
|||
* option) any later version.
|
||||
*/
|
||||
|
||||
|
||||
#ifndef __ASM_MACH_LOONGSON32_CPUFREQ_H
|
||||
#define __ASM_MACH_LOONGSON32_CPUFREQ_H
|
||||
|
||||
|
|
25
arch/mips/include/asm/mach-loongson32/dma.h
Normal file
25
arch/mips/include/asm/mach-loongson32/dma.h
Normal file
|
@ -0,0 +1,25 @@
|
|||
/*
|
||||
* Copyright (c) 2015 Zhang, Keguang <keguang.zhang@gmail.com>
|
||||
*
|
||||
* Loongson 1 NAND platform support.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_MACH_LOONGSON32_DMA_H
|
||||
#define __ASM_MACH_LOONGSON32_DMA_H
|
||||
|
||||
#define LS1X_DMA_CHANNEL0 0
|
||||
#define LS1X_DMA_CHANNEL1 1
|
||||
#define LS1X_DMA_CHANNEL2 2
|
||||
|
||||
struct plat_ls1x_dma {
|
||||
int nr_channels;
|
||||
};
|
||||
|
||||
extern struct plat_ls1x_dma ls1b_dma_pdata;
|
||||
|
||||
#endif /* __ASM_MACH_LOONGSON32_DMA_H */
|
|
@ -9,7 +9,6 @@
|
|||
* option) any later version.
|
||||
*/
|
||||
|
||||
|
||||
#ifndef __ASM_MACH_LOONGSON32_IRQ_H
|
||||
#define __ASM_MACH_LOONGSON32_IRQ_H
|
||||
|
||||
|
|
|
@ -9,7 +9,6 @@
|
|||
* option) any later version.
|
||||
*/
|
||||
|
||||
|
||||
#ifndef __ASM_MACH_LOONGSON32_LOONGSON1_H
|
||||
#define __ASM_MACH_LOONGSON32_LOONGSON1_H
|
||||
|
||||
|
@ -18,6 +17,9 @@
|
|||
/* Loongson 1 Register Bases */
|
||||
#define LS1X_MUX_BASE 0x1fd00420
|
||||
#define LS1X_INTC_BASE 0x1fd01040
|
||||
#define LS1X_GPIO0_BASE 0x1fd010c0
|
||||
#define LS1X_GPIO1_BASE 0x1fd010c4
|
||||
#define LS1X_DMAC_BASE 0x1fd01160
|
||||
#define LS1X_EHCI_BASE 0x1fe00000
|
||||
#define LS1X_OHCI_BASE 0x1fe08000
|
||||
#define LS1X_GMAC0_BASE 0x1fe10000
|
||||
|
|
30
arch/mips/include/asm/mach-loongson32/nand.h
Normal file
30
arch/mips/include/asm/mach-loongson32/nand.h
Normal file
|
@ -0,0 +1,30 @@
|
|||
/*
|
||||
* Copyright (c) 2015 Zhang, Keguang <keguang.zhang@gmail.com>
|
||||
*
|
||||
* Loongson 1 NAND platform support.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
#ifndef __ASM_MACH_LOONGSON32_NAND_H
|
||||
#define __ASM_MACH_LOONGSON32_NAND_H
|
||||
|
||||
#include <linux/dmaengine.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
|
||||
struct plat_ls1x_nand {
|
||||
struct mtd_partition *parts;
|
||||
unsigned int nr_parts;
|
||||
|
||||
int hold_cycle;
|
||||
int wait_cycle;
|
||||
};
|
||||
|
||||
extern struct plat_ls1x_nand ls1b_nand_pdata;
|
||||
|
||||
bool ls1x_dma_filter_fn(struct dma_chan *chan, void *param);
|
||||
|
||||
#endif /* __ASM_MACH_LOONGSON32_NAND_H */
|
|
@ -7,20 +7,28 @@
|
|||
* option) any later version.
|
||||
*/
|
||||
|
||||
|
||||
#ifndef __ASM_MACH_LOONGSON32_PLATFORM_H
|
||||
#define __ASM_MACH_LOONGSON32_PLATFORM_H
|
||||
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#include <dma.h>
|
||||
#include <nand.h>
|
||||
|
||||
extern struct platform_device ls1x_uart_pdev;
|
||||
extern struct platform_device ls1x_cpufreq_pdev;
|
||||
extern struct platform_device ls1x_dma_pdev;
|
||||
extern struct platform_device ls1x_eth0_pdev;
|
||||
extern struct platform_device ls1x_eth1_pdev;
|
||||
extern struct platform_device ls1x_ehci_pdev;
|
||||
extern struct platform_device ls1x_gpio0_pdev;
|
||||
extern struct platform_device ls1x_gpio1_pdev;
|
||||
extern struct platform_device ls1x_nand_pdev;
|
||||
extern struct platform_device ls1x_rtc_pdev;
|
||||
|
||||
extern void __init ls1x_clk_init(void);
|
||||
extern void __init ls1x_serial_setup(struct platform_device *pdev);
|
||||
void __init ls1x_clk_init(void);
|
||||
void __init ls1x_dma_set_platdata(struct plat_ls1x_dma *pdata);
|
||||
void __init ls1x_nand_set_platdata(struct plat_ls1x_nand *pdata);
|
||||
void __init ls1x_serial_set_uartclk(struct platform_device *pdev);
|
||||
|
||||
#endif /* __ASM_MACH_LOONGSON32_PLATFORM_H */
|
||||
|
|
|
@ -19,18 +19,18 @@
|
|||
#define LS1X_CLK_PLL_DIV LS1X_CLK_REG(0x4)
|
||||
|
||||
/* Clock PLL Divisor Register Bits */
|
||||
#define DIV_DC_EN (0x1 << 31)
|
||||
#define DIV_DC_RST (0x1 << 30)
|
||||
#define DIV_CPU_EN (0x1 << 25)
|
||||
#define DIV_CPU_RST (0x1 << 24)
|
||||
#define DIV_DDR_EN (0x1 << 19)
|
||||
#define DIV_DDR_RST (0x1 << 18)
|
||||
#define RST_DC_EN (0x1 << 5)
|
||||
#define RST_DC (0x1 << 4)
|
||||
#define RST_DDR_EN (0x1 << 3)
|
||||
#define RST_DDR (0x1 << 2)
|
||||
#define RST_CPU_EN (0x1 << 1)
|
||||
#define RST_CPU 0x1
|
||||
#define DIV_DC_EN BIT(31)
|
||||
#define DIV_DC_RST BIT(30)
|
||||
#define DIV_CPU_EN BIT(25)
|
||||
#define DIV_CPU_RST BIT(24)
|
||||
#define DIV_DDR_EN BIT(19)
|
||||
#define DIV_DDR_RST BIT(18)
|
||||
#define RST_DC_EN BIT(5)
|
||||
#define RST_DC BIT(4)
|
||||
#define RST_DDR_EN BIT(3)
|
||||
#define RST_DDR BIT(2)
|
||||
#define RST_CPU_EN BIT(1)
|
||||
#define RST_CPU BIT(0)
|
||||
|
||||
#define DIV_DC_SHIFT 26
|
||||
#define DIV_CPU_SHIFT 20
|
||||
|
|
|
@ -19,49 +19,49 @@
|
|||
#define LS1X_MUX_CTRL1 LS1X_MUX_REG(0x4)
|
||||
|
||||
/* MUX CTRL0 Register Bits */
|
||||
#define UART0_USE_PWM23 (0x1 << 28)
|
||||
#define UART0_USE_PWM01 (0x1 << 27)
|
||||
#define UART1_USE_LCD0_5_6_11 (0x1 << 26)
|
||||
#define I2C2_USE_CAN1 (0x1 << 25)
|
||||
#define I2C1_USE_CAN0 (0x1 << 24)
|
||||
#define NAND3_USE_UART5 (0x1 << 23)
|
||||
#define NAND3_USE_UART4 (0x1 << 22)
|
||||
#define NAND3_USE_UART1_DAT (0x1 << 21)
|
||||
#define NAND3_USE_UART1_CTS (0x1 << 20)
|
||||
#define NAND3_USE_PWM23 (0x1 << 19)
|
||||
#define NAND3_USE_PWM01 (0x1 << 18)
|
||||
#define NAND2_USE_UART5 (0x1 << 17)
|
||||
#define NAND2_USE_UART4 (0x1 << 16)
|
||||
#define NAND2_USE_UART1_DAT (0x1 << 15)
|
||||
#define NAND2_USE_UART1_CTS (0x1 << 14)
|
||||
#define NAND2_USE_PWM23 (0x1 << 13)
|
||||
#define NAND2_USE_PWM01 (0x1 << 12)
|
||||
#define NAND1_USE_UART5 (0x1 << 11)
|
||||
#define NAND1_USE_UART4 (0x1 << 10)
|
||||
#define NAND1_USE_UART1_DAT (0x1 << 9)
|
||||
#define NAND1_USE_UART1_CTS (0x1 << 8)
|
||||
#define NAND1_USE_PWM23 (0x1 << 7)
|
||||
#define NAND1_USE_PWM01 (0x1 << 6)
|
||||
#define GMAC1_USE_UART1 (0x1 << 4)
|
||||
#define GMAC1_USE_UART0 (0x1 << 3)
|
||||
#define LCD_USE_UART0_DAT (0x1 << 2)
|
||||
#define LCD_USE_UART15 (0x1 << 1)
|
||||
#define LCD_USE_UART0 0x1
|
||||
#define UART0_USE_PWM23 BIT(28)
|
||||
#define UART0_USE_PWM01 BIT(27)
|
||||
#define UART1_USE_LCD0_5_6_11 BIT(26)
|
||||
#define I2C2_USE_CAN1 BIT(25)
|
||||
#define I2C1_USE_CAN0 BIT(24)
|
||||
#define NAND3_USE_UART5 BIT(23)
|
||||
#define NAND3_USE_UART4 BIT(22)
|
||||
#define NAND3_USE_UART1_DAT BIT(21)
|
||||
#define NAND3_USE_UART1_CTS BIT(20)
|
||||
#define NAND3_USE_PWM23 BIT(19)
|
||||
#define NAND3_USE_PWM01 BIT(18)
|
||||
#define NAND2_USE_UART5 BIT(17)
|
||||
#define NAND2_USE_UART4 BIT(16)
|
||||
#define NAND2_USE_UART1_DAT BIT(15)
|
||||
#define NAND2_USE_UART1_CTS BIT(14)
|
||||
#define NAND2_USE_PWM23 BIT(13)
|
||||
#define NAND2_USE_PWM01 BIT(12)
|
||||
#define NAND1_USE_UART5 BIT(11)
|
||||
#define NAND1_USE_UART4 BIT(10)
|
||||
#define NAND1_USE_UART1_DAT BIT(9)
|
||||
#define NAND1_USE_UART1_CTS BIT(8)
|
||||
#define NAND1_USE_PWM23 BIT(7)
|
||||
#define NAND1_USE_PWM01 BIT(6)
|
||||
#define GMAC1_USE_UART1 BIT(4)
|
||||
#define GMAC1_USE_UART0 BIT(3)
|
||||
#define LCD_USE_UART0_DAT BIT(2)
|
||||
#define LCD_USE_UART15 BIT(1)
|
||||
#define LCD_USE_UART0 BIT(0)
|
||||
|
||||
/* MUX CTRL1 Register Bits */
|
||||
#define USB_RESET (0x1 << 31)
|
||||
#define SPI1_CS_USE_PWM01 (0x1 << 24)
|
||||
#define SPI1_USE_CAN (0x1 << 23)
|
||||
#define DISABLE_DDR_CONFSPACE (0x1 << 20)
|
||||
#define DDR32TO16EN (0x1 << 16)
|
||||
#define GMAC1_SHUT (0x1 << 13)
|
||||
#define GMAC0_SHUT (0x1 << 12)
|
||||
#define USB_SHUT (0x1 << 11)
|
||||
#define UART1_3_USE_CAN1 (0x1 << 5)
|
||||
#define UART1_2_USE_CAN0 (0x1 << 4)
|
||||
#define GMAC1_USE_TXCLK (0x1 << 3)
|
||||
#define GMAC0_USE_TXCLK (0x1 << 2)
|
||||
#define GMAC1_USE_PWM23 (0x1 << 1)
|
||||
#define GMAC0_USE_PWM01 0x1
|
||||
#define USB_RESET BIT(31)
|
||||
#define SPI1_CS_USE_PWM01 BIT(24)
|
||||
#define SPI1_USE_CAN BIT(23)
|
||||
#define DISABLE_DDR_CONFSPACE BIT(20)
|
||||
#define DDR32TO16EN BIT(16)
|
||||
#define GMAC1_SHUT BIT(13)
|
||||
#define GMAC0_SHUT BIT(12)
|
||||
#define USB_SHUT BIT(11)
|
||||
#define UART1_3_USE_CAN1 BIT(5)
|
||||
#define UART1_2_USE_CAN0 BIT(4)
|
||||
#define GMAC1_USE_TXCLK BIT(3)
|
||||
#define GMAC0_USE_TXCLK BIT(2)
|
||||
#define GMAC1_USE_PWM23 BIT(1)
|
||||
#define GMAC0_USE_PWM01 BIT(0)
|
||||
|
||||
#endif /* __ASM_MACH_LOONGSON32_REGS_MUX_H */
|
||||
|
|
|
@ -19,11 +19,11 @@
|
|||
#define PWM_CTRL 0xc
|
||||
|
||||
/* PWM Control Register Bits */
|
||||
#define CNT_RST (0x1 << 7)
|
||||
#define INT_SR (0x1 << 6)
|
||||
#define INT_EN (0x1 << 5)
|
||||
#define PWM_SINGLE (0x1 << 4)
|
||||
#define PWM_OE (0x1 << 3)
|
||||
#define CNT_EN 0x1
|
||||
#define CNT_RST BIT(7)
|
||||
#define INT_SR BIT(6)
|
||||
#define INT_EN BIT(5)
|
||||
#define PWM_SINGLE BIT(4)
|
||||
#define PWM_OE BIT(3)
|
||||
#define CNT_EN BIT(0)
|
||||
|
||||
#endif /* __ASM_MACH_LOONGSON32_REGS_PWM_H */
|
||||
|
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
|
||||
* Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
|
@ -10,14 +10,17 @@
|
|||
#include <linux/clk.h>
|
||||
#include <linux/dma-mapping.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/sizes.h>
|
||||
#include <linux/phy.h>
|
||||
#include <linux/serial_8250.h>
|
||||
#include <linux/stmmac.h>
|
||||
#include <linux/usb/ehci_pdriver.h>
|
||||
#include <asm-generic/sizes.h>
|
||||
|
||||
#include <cpufreq.h>
|
||||
#include <loongson1.h>
|
||||
#include <cpufreq.h>
|
||||
#include <dma.h>
|
||||
#include <nand.h>
|
||||
|
||||
/* 8250/16550 compatible UART */
|
||||
#define LS1X_UART(_id) \
|
||||
|
@ -45,7 +48,7 @@ struct platform_device ls1x_uart_pdev = {
|
|||
},
|
||||
};
|
||||
|
||||
void __init ls1x_serial_setup(struct platform_device *pdev)
|
||||
void __init ls1x_serial_set_uartclk(struct platform_device *pdev)
|
||||
{
|
||||
struct clk *clk;
|
||||
struct plat_serial8250_port *p;
|
||||
|
@ -77,6 +80,42 @@ struct platform_device ls1x_cpufreq_pdev = {
|
|||
},
|
||||
};
|
||||
|
||||
/* DMA */
|
||||
static struct resource ls1x_dma_resources[] = {
|
||||
[0] = {
|
||||
.start = LS1X_DMAC_BASE,
|
||||
.end = LS1X_DMAC_BASE + SZ_4 - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
[1] = {
|
||||
.start = LS1X_DMA0_IRQ,
|
||||
.end = LS1X_DMA0_IRQ,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
[2] = {
|
||||
.start = LS1X_DMA1_IRQ,
|
||||
.end = LS1X_DMA1_IRQ,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
[3] = {
|
||||
.start = LS1X_DMA2_IRQ,
|
||||
.end = LS1X_DMA2_IRQ,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
};
|
||||
|
||||
struct platform_device ls1x_dma_pdev = {
|
||||
.name = "ls1x-dma",
|
||||
.id = -1,
|
||||
.num_resources = ARRAY_SIZE(ls1x_dma_resources),
|
||||
.resource = ls1x_dma_resources,
|
||||
};
|
||||
|
||||
void __init ls1x_dma_set_platdata(struct plat_ls1x_dma *pdata)
|
||||
{
|
||||
ls1x_dma_pdev.dev.platform_data = pdata;
|
||||
}
|
||||
|
||||
/* Synopsys Ethernet GMAC */
|
||||
static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = {
|
||||
.phy_mask = 0,
|
||||
|
@ -198,6 +237,64 @@ struct platform_device ls1x_eth1_pdev = {
|
|||
},
|
||||
};
|
||||
|
||||
/* GPIO */
|
||||
static struct resource ls1x_gpio0_resources[] = {
|
||||
[0] = {
|
||||
.start = LS1X_GPIO0_BASE,
|
||||
.end = LS1X_GPIO0_BASE + SZ_4 - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
};
|
||||
|
||||
struct platform_device ls1x_gpio0_pdev = {
|
||||
.name = "ls1x-gpio",
|
||||
.id = 0,
|
||||
.num_resources = ARRAY_SIZE(ls1x_gpio0_resources),
|
||||
.resource = ls1x_gpio0_resources,
|
||||
};
|
||||
|
||||
static struct resource ls1x_gpio1_resources[] = {
|
||||
[0] = {
|
||||
.start = LS1X_GPIO1_BASE,
|
||||
.end = LS1X_GPIO1_BASE + SZ_4 - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
};
|
||||
|
||||
struct platform_device ls1x_gpio1_pdev = {
|
||||
.name = "ls1x-gpio",
|
||||
.id = 1,
|
||||
.num_resources = ARRAY_SIZE(ls1x_gpio1_resources),
|
||||
.resource = ls1x_gpio1_resources,
|
||||
};
|
||||
|
||||
/* NAND Flash */
|
||||
static struct resource ls1x_nand_resources[] = {
|
||||
[0] = {
|
||||
.start = LS1X_NAND_BASE,
|
||||
.end = LS1X_NAND_BASE + SZ_32 - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
[1] = {
|
||||
/* DMA channel 0 is dedicated to NAND */
|
||||
.start = LS1X_DMA_CHANNEL0,
|
||||
.end = LS1X_DMA_CHANNEL0,
|
||||
.flags = IORESOURCE_DMA,
|
||||
},
|
||||
};
|
||||
|
||||
struct platform_device ls1x_nand_pdev = {
|
||||
.name = "ls1x-nand",
|
||||
.id = -1,
|
||||
.num_resources = ARRAY_SIZE(ls1x_nand_resources),
|
||||
.resource = ls1x_nand_resources,
|
||||
};
|
||||
|
||||
void __init ls1x_nand_set_platdata(struct plat_ls1x_nand *pdata)
|
||||
{
|
||||
ls1x_nand_pdev.dev.platform_data = pdata;
|
||||
}
|
||||
|
||||
/* USB EHCI */
|
||||
static u64 ls1x_ehci_dmamask = DMA_BIT_MASK(32);
|
||||
|
||||
|
|
|
@ -9,12 +9,13 @@
|
|||
|
||||
#include <linux/io.h>
|
||||
#include <linux/pm.h>
|
||||
#include <linux/sizes.h>
|
||||
#include <asm/idle.h>
|
||||
#include <asm/reboot.h>
|
||||
|
||||
#include <loongson1.h>
|
||||
|
||||
static void __iomem *wdt_base;
|
||||
static void __iomem *wdt_reg_base;
|
||||
|
||||
static void ls1x_halt(void)
|
||||
{
|
||||
|
@ -26,9 +27,9 @@ static void ls1x_halt(void)
|
|||
|
||||
static void ls1x_restart(char *command)
|
||||
{
|
||||
__raw_writel(0x1, wdt_base + WDT_EN);
|
||||
__raw_writel(0x1, wdt_base + WDT_TIMER);
|
||||
__raw_writel(0x1, wdt_base + WDT_SET);
|
||||
__raw_writel(0x1, wdt_reg_base + WDT_EN);
|
||||
__raw_writel(0x1, wdt_reg_base + WDT_TIMER);
|
||||
__raw_writel(0x1, wdt_reg_base + WDT_SET);
|
||||
|
||||
ls1x_halt();
|
||||
}
|
||||
|
@ -40,8 +41,8 @@ static void ls1x_power_off(void)
|
|||
|
||||
static int __init ls1x_reboot_setup(void)
|
||||
{
|
||||
wdt_base = ioremap_nocache(LS1X_WDT_BASE, 0x0f);
|
||||
if (!wdt_base)
|
||||
wdt_reg_base = ioremap_nocache(LS1X_WDT_BASE, (SZ_4 + SZ_8));
|
||||
if (!wdt_reg_base)
|
||||
panic("Failed to remap watchdog registers");
|
||||
|
||||
_machine_restart = ls1x_restart;
|
||||
|
|
|
@ -9,6 +9,7 @@
|
|||
|
||||
#include <linux/clk.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/sizes.h>
|
||||
#include <asm/time.h>
|
||||
|
||||
#include <loongson1.h>
|
||||
|
@ -35,25 +36,25 @@
|
|||
|
||||
DEFINE_RAW_SPINLOCK(ls1x_timer_lock);
|
||||
|
||||
static void __iomem *timer_base;
|
||||
static void __iomem *timer_reg_base;
|
||||
static uint32_t ls1x_jiffies_per_tick;
|
||||
|
||||
static inline void ls1x_pwmtimer_set_period(uint32_t period)
|
||||
{
|
||||
__raw_writel(period, timer_base + PWM_HRC);
|
||||
__raw_writel(period, timer_base + PWM_LRC);
|
||||
__raw_writel(period, timer_reg_base + PWM_HRC);
|
||||
__raw_writel(period, timer_reg_base + PWM_LRC);
|
||||
}
|
||||
|
||||
static inline void ls1x_pwmtimer_restart(void)
|
||||
{
|
||||
__raw_writel(0x0, timer_base + PWM_CNT);
|
||||
__raw_writel(INT_EN | CNT_EN, timer_base + PWM_CTRL);
|
||||
__raw_writel(0x0, timer_reg_base + PWM_CNT);
|
||||
__raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
|
||||
}
|
||||
|
||||
void __init ls1x_pwmtimer_init(void)
|
||||
{
|
||||
timer_base = ioremap(LS1X_TIMER_BASE, 0xf);
|
||||
if (!timer_base)
|
||||
timer_reg_base = ioremap_nocache(LS1X_TIMER_BASE, SZ_16);
|
||||
if (!timer_reg_base)
|
||||
panic("Failed to remap timer registers");
|
||||
|
||||
ls1x_jiffies_per_tick = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ);
|
||||
|
@ -86,7 +87,7 @@ static cycle_t ls1x_clocksource_read(struct clocksource *cs)
|
|||
*/
|
||||
jifs = jiffies;
|
||||
/* read the count */
|
||||
count = __raw_readl(timer_base + PWM_CNT);
|
||||
count = __raw_readl(timer_reg_base + PWM_CNT);
|
||||
|
||||
/*
|
||||
* It's possible for count to appear to go the wrong way for this
|
||||
|
@ -131,7 +132,7 @@ static int ls1x_clockevent_set_state_periodic(struct clock_event_device *cd)
|
|||
raw_spin_lock(&ls1x_timer_lock);
|
||||
ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
|
||||
ls1x_pwmtimer_restart();
|
||||
__raw_writel(INT_EN | CNT_EN, timer_base + PWM_CTRL);
|
||||
__raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
|
||||
raw_spin_unlock(&ls1x_timer_lock);
|
||||
|
||||
return 0;
|
||||
|
@ -140,7 +141,7 @@ static int ls1x_clockevent_set_state_periodic(struct clock_event_device *cd)
|
|||
static int ls1x_clockevent_tick_resume(struct clock_event_device *cd)
|
||||
{
|
||||
raw_spin_lock(&ls1x_timer_lock);
|
||||
__raw_writel(INT_EN | CNT_EN, timer_base + PWM_CTRL);
|
||||
__raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
|
||||
raw_spin_unlock(&ls1x_timer_lock);
|
||||
|
||||
return 0;
|
||||
|
@ -149,8 +150,8 @@ static int ls1x_clockevent_tick_resume(struct clock_event_device *cd)
|
|||
static int ls1x_clockevent_set_state_shutdown(struct clock_event_device *cd)
|
||||
{
|
||||
raw_spin_lock(&ls1x_timer_lock);
|
||||
__raw_writel(__raw_readl(timer_base + PWM_CTRL) & ~CNT_EN,
|
||||
timer_base + PWM_CTRL);
|
||||
__raw_writel(__raw_readl(timer_reg_base + PWM_CTRL) & ~CNT_EN,
|
||||
timer_reg_base + PWM_CTRL);
|
||||
raw_spin_unlock(&ls1x_timer_lock);
|
||||
|
||||
return 0;
|
||||
|
@ -220,7 +221,7 @@ void __init plat_time_init(void)
|
|||
|
||||
#ifdef CONFIG_CEVT_CSRC_LS1X
|
||||
/* setup LS1X PWM timer */
|
||||
clk = clk_get(NULL, "ls1x_pwmtimer");
|
||||
clk = clk_get(NULL, "ls1x-pwmtimer");
|
||||
if (IS_ERR(clk))
|
||||
panic("unable to get timer clock, err=%ld", PTR_ERR(clk));
|
||||
|
||||
|
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
|
||||
* Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@gmail.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
|
@ -7,26 +7,83 @@
|
|||
* option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/leds.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/sizes.h>
|
||||
|
||||
#include <loongson1.h>
|
||||
#include <dma.h>
|
||||
#include <nand.h>
|
||||
#include <platform.h>
|
||||
|
||||
struct plat_ls1x_dma ls1x_dma_pdata = {
|
||||
.nr_channels = 3,
|
||||
};
|
||||
|
||||
static struct mtd_partition ls1x_nand_parts[] = {
|
||||
{
|
||||
.name = "kernel",
|
||||
.offset = 0,
|
||||
.size = SZ_16M,
|
||||
},
|
||||
{
|
||||
.name = "rootfs",
|
||||
.offset = MTDPART_OFS_APPEND,
|
||||
.size = MTDPART_SIZ_FULL,
|
||||
},
|
||||
};
|
||||
|
||||
struct plat_ls1x_nand ls1x_nand_pdata = {
|
||||
.parts = ls1x_nand_parts,
|
||||
.nr_parts = ARRAY_SIZE(ls1x_nand_parts),
|
||||
.hold_cycle = 0x2,
|
||||
.wait_cycle = 0xc,
|
||||
};
|
||||
|
||||
static const struct gpio_led ls1x_gpio_leds[] __initconst = {
|
||||
{
|
||||
.name = "LED9",
|
||||
.default_trigger = "heartbeat",
|
||||
.gpio = 38,
|
||||
.active_low = 1,
|
||||
.default_state = LEDS_GPIO_DEFSTATE_OFF,
|
||||
}, {
|
||||
.name = "LED6",
|
||||
.default_trigger = "nand-disk",
|
||||
.gpio = 39,
|
||||
.active_low = 1,
|
||||
.default_state = LEDS_GPIO_DEFSTATE_OFF,
|
||||
},
|
||||
};
|
||||
|
||||
static const struct gpio_led_platform_data ls1x_led_pdata __initconst = {
|
||||
.num_leds = ARRAY_SIZE(ls1x_gpio_leds),
|
||||
.leds = ls1x_gpio_leds,
|
||||
};
|
||||
|
||||
static struct platform_device *ls1b_platform_devices[] __initdata = {
|
||||
&ls1x_uart_pdev,
|
||||
&ls1x_cpufreq_pdev,
|
||||
&ls1x_dma_pdev,
|
||||
&ls1x_eth0_pdev,
|
||||
&ls1x_eth1_pdev,
|
||||
&ls1x_ehci_pdev,
|
||||
&ls1x_gpio0_pdev,
|
||||
&ls1x_gpio1_pdev,
|
||||
&ls1x_nand_pdev,
|
||||
&ls1x_rtc_pdev,
|
||||
};
|
||||
|
||||
static int __init ls1b_platform_init(void)
|
||||
{
|
||||
int err;
|
||||
ls1x_serial_set_uartclk(&ls1x_uart_pdev);
|
||||
ls1x_dma_set_platdata(&ls1x_dma_pdata);
|
||||
ls1x_nand_set_platdata(&ls1x_nand_pdata);
|
||||
|
||||
ls1x_serial_setup(&ls1x_uart_pdev);
|
||||
gpio_led_register_device(-1, &ls1x_led_pdata);
|
||||
|
||||
err = platform_add_devices(ls1b_platform_devices,
|
||||
return platform_add_devices(ls1b_platform_devices,
|
||||
ARRAY_SIZE(ls1b_platform_devices));
|
||||
return err;
|
||||
}
|
||||
|
||||
arch_initcall(ls1b_platform_init);
|
||||
|
|
Loading…
Reference in a new issue