[MIPS] Wind River 4KC PPMC Eval Board Support
Support for the GT-64120-based Wind River 4KC PPMC Evaluation board. Signed-off-by: Rongkai.Zhan <Rongkai.zhan@windriver.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>wifi-calibration
Mark.Zhan
Ralf Baechle
parent
a643d2b574
commit
a240a46964
|
|
@ -327,6 +327,27 @@ config MIPS_SEAD
|
|||
This enables support for the MIPS Technologies SEAD evaluation
|
||||
board.
|
||||
|
||||
config WR_PPMC
|
||||
bool "Support for Wind River PPMC board"
|
||||
select IRQ_CPU
|
||||
select BOOT_ELF32
|
||||
select DMA_NONCOHERENT
|
||||
select HW_HAS_PCI
|
||||
select MIPS_GT64120
|
||||
select SWAP_IO_SPACE
|
||||
select SYS_HAS_CPU_MIPS32_R1
|
||||
select SYS_HAS_CPU_MIPS32_R2
|
||||
select SYS_HAS_CPU_MIPS64_R1
|
||||
select SYS_HAS_CPU_NEVADA
|
||||
select SYS_HAS_CPU_RM7000
|
||||
select SYS_SUPPORTS_32BIT_KERNEL
|
||||
select SYS_SUPPORTS_64BIT_KERNEL
|
||||
select SYS_SUPPORTS_BIG_ENDIAN
|
||||
select SYS_SUPPORTS_LITTLE_ENDIAN
|
||||
help
|
||||
This enables support for the Wind River MIPS32 4KC PPMC evaluation
|
||||
board, which is based on GT64120 bridge chip.
|
||||
|
||||
config MIPS_SIM
|
||||
bool 'MIPS simulator (MIPSsim)'
|
||||
select DMA_NONCOHERENT
|
||||
|
|
|
|||
|
|
@ -286,6 +286,13 @@ core-$(CONFIG_MIPS_EV96100) += arch/mips/galileo-boards/ev96100/
|
|||
cflags-$(CONFIG_MIPS_EV96100) += -Iinclude/asm-mips/mach-ev96100
|
||||
load-$(CONFIG_MIPS_EV96100) += 0xffffffff80100000
|
||||
|
||||
#
|
||||
# Wind River PPMC Board (4KC + GT64120)
|
||||
#
|
||||
core-$(CONFIG_WR_PPMC) += arch/mips/gt64120/wrppmc/
|
||||
cflags-$(CONFIG_WR_PPMC) += -Iinclude/asm-mips/mach-wrppmc
|
||||
load-$(CONFIG_WR_PPMC) += 0xffffffff80100000
|
||||
|
||||
#
|
||||
# Globespan IVR eval board with QED 5231 CPU
|
||||
#
|
||||
|
|
|
|||
|
|
@ -0,0 +1,801 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.16.11
|
||||
# Fri May 5 17:11:22 2006
|
||||
#
|
||||
CONFIG_MIPS=y
|
||||
|
||||
#
|
||||
# Machine selection
|
||||
#
|
||||
# CONFIG_MIPS_MTX1 is not set
|
||||
# CONFIG_MIPS_BOSPORUS is not set
|
||||
# CONFIG_MIPS_PB1000 is not set
|
||||
# CONFIG_MIPS_PB1100 is not set
|
||||
# CONFIG_MIPS_PB1500 is not set
|
||||
# CONFIG_MIPS_PB1550 is not set
|
||||
# CONFIG_MIPS_PB1200 is not set
|
||||
# CONFIG_MIPS_DB1000 is not set
|
||||
# CONFIG_MIPS_DB1100 is not set
|
||||
# CONFIG_MIPS_DB1500 is not set
|
||||
# CONFIG_MIPS_DB1550 is not set
|
||||
# CONFIG_MIPS_DB1200 is not set
|
||||
# CONFIG_MIPS_MIRAGE is not set
|
||||
# CONFIG_MIPS_COBALT is not set
|
||||
# CONFIG_MACH_DECSTATION is not set
|
||||
# CONFIG_MIPS_EV64120 is not set
|
||||
# CONFIG_MIPS_EV96100 is not set
|
||||
# CONFIG_MIPS_IVR is not set
|
||||
# CONFIG_MIPS_ITE8172 is not set
|
||||
# CONFIG_MACH_JAZZ is not set
|
||||
# CONFIG_LASAT is not set
|
||||
# CONFIG_MIPS_ATLAS is not set
|
||||
# CONFIG_MIPS_MALTA is not set
|
||||
# CONFIG_MIPS_SEAD is not set
|
||||
CONFIG_WR_PPMC=y
|
||||
# CONFIG_MIPS_SIM is not set
|
||||
# CONFIG_MOMENCO_JAGUAR_ATX is not set
|
||||
# CONFIG_MOMENCO_OCELOT is not set
|
||||
# CONFIG_MOMENCO_OCELOT_3 is not set
|
||||
# CONFIG_MOMENCO_OCELOT_C is not set
|
||||
# CONFIG_MOMENCO_OCELOT_G is not set
|
||||
# CONFIG_MIPS_XXS1500 is not set
|
||||
# CONFIG_PNX8550_V2PCI is not set
|
||||
# CONFIG_PNX8550_JBS is not set
|
||||
# CONFIG_DDB5074 is not set
|
||||
# CONFIG_DDB5476 is not set
|
||||
# CONFIG_DDB5477 is not set
|
||||
# CONFIG_MACH_VR41XX is not set
|
||||
# CONFIG_PMC_YOSEMITE is not set
|
||||
# CONFIG_QEMU is not set
|
||||
# CONFIG_SGI_IP22 is not set
|
||||
# CONFIG_SGI_IP27 is not set
|
||||
# CONFIG_SGI_IP32 is not set
|
||||
# CONFIG_SIBYTE_BIGSUR is not set
|
||||
# CONFIG_SIBYTE_SWARM is not set
|
||||
# CONFIG_SIBYTE_SENTOSA is not set
|
||||
# CONFIG_SIBYTE_RHONE is not set
|
||||
# CONFIG_SIBYTE_CARMEL is not set
|
||||
# CONFIG_SIBYTE_PTSWARM is not set
|
||||
# CONFIG_SIBYTE_LITTLESUR is not set
|
||||
# CONFIG_SIBYTE_CRHINE is not set
|
||||
# CONFIG_SIBYTE_CRHONE is not set
|
||||
# CONFIG_SNI_RM200_PCI is not set
|
||||
# CONFIG_TOSHIBA_JMR3927 is not set
|
||||
# CONFIG_TOSHIBA_RBTX4927 is not set
|
||||
# CONFIG_TOSHIBA_RBTX4938 is not set
|
||||
CONFIG_RWSEM_GENERIC_SPINLOCK=y
|
||||
CONFIG_GENERIC_CALIBRATE_DELAY=y
|
||||
CONFIG_DMA_NONCOHERENT=y
|
||||
CONFIG_DMA_NEED_PCI_MAP_STATE=y
|
||||
CONFIG_CPU_BIG_ENDIAN=y
|
||||
# CONFIG_CPU_LITTLE_ENDIAN is not set
|
||||
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
|
||||
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
|
||||
CONFIG_IRQ_CPU=y
|
||||
CONFIG_MIPS_GT64120=y
|
||||
CONFIG_SWAP_IO_SPACE=y
|
||||
CONFIG_BOOT_ELF32=y
|
||||
CONFIG_MIPS_L1_CACHE_SHIFT=5
|
||||
|
||||
#
|
||||
# CPU selection
|
||||
#
|
||||
CONFIG_CPU_MIPS32_R1=y
|
||||
# CONFIG_CPU_MIPS32_R2 is not set
|
||||
# CONFIG_CPU_MIPS64_R1 is not set
|
||||
# CONFIG_CPU_MIPS64_R2 is not set
|
||||
# CONFIG_CPU_R3000 is not set
|
||||
# CONFIG_CPU_TX39XX is not set
|
||||
# CONFIG_CPU_VR41XX is not set
|
||||
# CONFIG_CPU_R4300 is not set
|
||||
# CONFIG_CPU_R4X00 is not set
|
||||
# CONFIG_CPU_TX49XX is not set
|
||||
# CONFIG_CPU_R5000 is not set
|
||||
# CONFIG_CPU_R5432 is not set
|
||||
# CONFIG_CPU_R6000 is not set
|
||||
# CONFIG_CPU_NEVADA is not set
|
||||
# CONFIG_CPU_R8000 is not set
|
||||
# CONFIG_CPU_R10000 is not set
|
||||
# CONFIG_CPU_RM7000 is not set
|
||||
# CONFIG_CPU_RM9000 is not set
|
||||
# CONFIG_CPU_SB1 is not set
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
|
||||
CONFIG_SYS_HAS_CPU_MIPS64_R1=y
|
||||
CONFIG_SYS_HAS_CPU_NEVADA=y
|
||||
CONFIG_SYS_HAS_CPU_RM7000=y
|
||||
CONFIG_CPU_MIPS32=y
|
||||
CONFIG_CPU_MIPSR1=y
|
||||
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
|
||||
CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
|
||||
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
|
||||
|
||||
#
|
||||
# Kernel type
|
||||
#
|
||||
CONFIG_32BIT=y
|
||||
# CONFIG_64BIT is not set
|
||||
CONFIG_PAGE_SIZE_4KB=y
|
||||
# CONFIG_PAGE_SIZE_8KB is not set
|
||||
# CONFIG_PAGE_SIZE_16KB is not set
|
||||
# CONFIG_PAGE_SIZE_64KB is not set
|
||||
CONFIG_CPU_HAS_PREFETCH=y
|
||||
# CONFIG_MIPS_MT is not set
|
||||
# CONFIG_64BIT_PHYS_ADDR is not set
|
||||
# CONFIG_CPU_ADVANCED is not set
|
||||
CONFIG_CPU_HAS_LLSC=y
|
||||
CONFIG_CPU_HAS_SYNC=y
|
||||
CONFIG_GENERIC_HARDIRQS=y
|
||||
CONFIG_GENERIC_IRQ_PROBE=y
|
||||
CONFIG_CPU_SUPPORTS_HIGHMEM=y
|
||||
CONFIG_ARCH_FLATMEM_ENABLE=y
|
||||
CONFIG_SELECT_MEMORY_MODEL=y
|
||||
CONFIG_FLATMEM_MANUAL=y
|
||||
# CONFIG_DISCONTIGMEM_MANUAL is not set
|
||||
# CONFIG_SPARSEMEM_MANUAL is not set
|
||||
CONFIG_FLATMEM=y
|
||||
CONFIG_FLAT_NODE_MEM_MAP=y
|
||||
# CONFIG_SPARSEMEM_STATIC is not set
|
||||
CONFIG_SPLIT_PTLOCK_CPUS=4
|
||||
CONFIG_PREEMPT_NONE=y
|
||||
# CONFIG_PREEMPT_VOLUNTARY is not set
|
||||
# CONFIG_PREEMPT is not set
|
||||
|
||||
#
|
||||
# Code maturity level options
|
||||
#
|
||||
CONFIG_EXPERIMENTAL=y
|
||||
CONFIG_BROKEN_ON_SMP=y
|
||||
CONFIG_INIT_ENV_ARG_LIMIT=32
|
||||
|
||||
#
|
||||
# General setup
|
||||
#
|
||||
CONFIG_LOCALVERSION=""
|
||||
CONFIG_LOCALVERSION_AUTO=y
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
# CONFIG_POSIX_MQUEUE is not set
|
||||
CONFIG_BSD_PROCESS_ACCT=y
|
||||
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
|
||||
CONFIG_SYSCTL=y
|
||||
# CONFIG_AUDIT is not set
|
||||
# CONFIG_IKCONFIG is not set
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
||||
CONFIG_EMBEDDED=y
|
||||
CONFIG_KALLSYMS=y
|
||||
CONFIG_KALLSYMS_EXTRA_PASS=y
|
||||
CONFIG_HOTPLUG=y
|
||||
CONFIG_PRINTK=y
|
||||
CONFIG_BUG=y
|
||||
CONFIG_ELF_CORE=y
|
||||
CONFIG_BASE_FULL=y
|
||||
CONFIG_FUTEX=y
|
||||
# CONFIG_EPOLL is not set
|
||||
CONFIG_SHMEM=y
|
||||
CONFIG_CC_ALIGN_FUNCTIONS=0
|
||||
CONFIG_CC_ALIGN_LABELS=0
|
||||
CONFIG_CC_ALIGN_LOOPS=0
|
||||
CONFIG_CC_ALIGN_JUMPS=0
|
||||
CONFIG_SLAB=y
|
||||
# CONFIG_TINY_SHMEM is not set
|
||||
CONFIG_BASE_SMALL=0
|
||||
# CONFIG_SLOB is not set
|
||||
|
||||
#
|
||||
# Loadable module support
|
||||
#
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_MODULE_FORCE_UNLOAD is not set
|
||||
CONFIG_OBSOLETE_MODPARM=y
|
||||
CONFIG_MODVERSIONS=y
|
||||
CONFIG_MODULE_SRCVERSION_ALL=y
|
||||
# CONFIG_KMOD is not set
|
||||
|
||||
#
|
||||
# Block layer
|
||||
#
|
||||
# CONFIG_LBD is not set
|
||||
|
||||
#
|
||||
# IO Schedulers
|
||||
#
|
||||
CONFIG_IOSCHED_NOOP=y
|
||||
CONFIG_IOSCHED_AS=y
|
||||
CONFIG_IOSCHED_DEADLINE=y
|
||||
CONFIG_IOSCHED_CFQ=y
|
||||
CONFIG_DEFAULT_AS=y
|
||||
# CONFIG_DEFAULT_DEADLINE is not set
|
||||
# CONFIG_DEFAULT_CFQ is not set
|
||||
# CONFIG_DEFAULT_NOOP is not set
|
||||
CONFIG_DEFAULT_IOSCHED="anticipatory"
|
||||
|
||||
#
|
||||
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
|
||||
#
|
||||
CONFIG_HW_HAS_PCI=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCI_LEGACY_PROC=y
|
||||
CONFIG_MMU=y
|
||||
|
||||
#
|
||||
# PCCARD (PCMCIA/CardBus) support
|
||||
#
|
||||
# CONFIG_PCCARD is not set
|
||||
|
||||
#
|
||||
# PCI Hotplug Support
|
||||
#
|
||||
CONFIG_HOTPLUG_PCI=y
|
||||
# CONFIG_HOTPLUG_PCI_FAKE is not set
|
||||
# CONFIG_HOTPLUG_PCI_CPCI is not set
|
||||
# CONFIG_HOTPLUG_PCI_SHPC is not set
|
||||
|
||||
#
|
||||
# Executable file formats
|
||||
#
|
||||
CONFIG_BINFMT_ELF=y
|
||||
CONFIG_BINFMT_MISC=y
|
||||
CONFIG_TRAD_SIGNALS=y
|
||||
|
||||
#
|
||||
# Networking
|
||||
#
|
||||
CONFIG_NET=y
|
||||
|
||||
#
|
||||
# Networking options
|
||||
#
|
||||
# CONFIG_NETDEBUG is not set
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_PACKET_MMAP=y
|
||||
CONFIG_UNIX=y
|
||||
# CONFIG_NET_KEY is not set
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
# CONFIG_IP_ADVANCED_ROUTER is not set
|
||||
CONFIG_IP_FIB_HASH=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
CONFIG_IP_PNP_RARP=y
|
||||
# CONFIG_NET_IPIP is not set
|
||||
# CONFIG_NET_IPGRE is not set
|
||||
CONFIG_IP_MROUTE=y
|
||||
# CONFIG_IP_PIMSM_V1 is not set
|
||||
# CONFIG_IP_PIMSM_V2 is not set
|
||||
CONFIG_ARPD=y
|
||||
# CONFIG_SYN_COOKIES is not set
|
||||
# CONFIG_INET_AH is not set
|
||||
# CONFIG_INET_ESP is not set
|
||||
# CONFIG_INET_IPCOMP is not set
|
||||
# CONFIG_INET_TUNNEL is not set
|
||||
CONFIG_INET_DIAG=y
|
||||
CONFIG_INET_TCP_DIAG=y
|
||||
# CONFIG_TCP_CONG_ADVANCED is not set
|
||||
CONFIG_TCP_CONG_BIC=y
|
||||
# CONFIG_IPV6 is not set
|
||||
# CONFIG_NETFILTER is not set
|
||||
|
||||
#
|
||||
# DCCP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_DCCP is not set
|
||||
|
||||
#
|
||||
# SCTP Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_IP_SCTP is not set
|
||||
|
||||
#
|
||||
# TIPC Configuration (EXPERIMENTAL)
|
||||
#
|
||||
# CONFIG_TIPC is not set
|
||||
# CONFIG_ATM is not set
|
||||
# CONFIG_BRIDGE is not set
|
||||
# CONFIG_VLAN_8021Q is not set
|
||||
# CONFIG_DECNET is not set
|
||||
# CONFIG_LLC2 is not set
|
||||
# CONFIG_IPX is not set
|
||||
# CONFIG_ATALK is not set
|
||||
# CONFIG_X25 is not set
|
||||
# CONFIG_LAPB is not set
|
||||
# CONFIG_NET_DIVERT is not set
|
||||
# CONFIG_ECONET is not set
|
||||
# CONFIG_WAN_ROUTER is not set
|
||||
|
||||
#
|
||||
# QoS and/or fair queueing
|
||||
#
|
||||
# CONFIG_NET_SCHED is not set
|
||||
|
||||
#
|
||||
# Network testing
|
||||
#
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
# CONFIG_IRDA is not set
|
||||
# CONFIG_BT is not set
|
||||
# CONFIG_IEEE80211 is not set
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
|
||||
#
|
||||
# Generic Driver Options
|
||||
#
|
||||
CONFIG_STANDALONE=y
|
||||
CONFIG_PREVENT_FIRMWARE_BUILD=y
|
||||
# CONFIG_FW_LOADER is not set
|
||||
|
||||
#
|
||||
# Connector - unified userspace <-> kernelspace linker
|
||||
#
|
||||
# CONFIG_CONNECTOR is not set
|
||||
|
||||
#
|
||||
# Memory Technology Devices (MTD)
|
||||
#
|
||||
# CONFIG_MTD is not set
|
||||
|
||||
#
|
||||
# Parallel port support
|
||||
#
|
||||
# CONFIG_PARPORT is not set
|
||||
|
||||
#
|
||||
# Plug and Play support
|
||||
#
|
||||
|
||||
#
|
||||
# Block devices
|
||||
#
|
||||
# CONFIG_BLK_CPQ_DA is not set
|
||||
# CONFIG_BLK_CPQ_CISS_DA is not set
|
||||
# CONFIG_BLK_DEV_DAC960 is not set
|
||||
# CONFIG_BLK_DEV_UMEM is not set
|
||||
# CONFIG_BLK_DEV_COW_COMMON is not set
|
||||
# CONFIG_BLK_DEV_LOOP is not set
|
||||
# CONFIG_BLK_DEV_NBD is not set
|
||||
# CONFIG_BLK_DEV_SX8 is not set
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=16
|
||||
CONFIG_BLK_DEV_RAM_SIZE=4096
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
# CONFIG_CDROM_PKTCDVD is not set
|
||||
# CONFIG_ATA_OVER_ETH is not set
|
||||
|
||||
#
|
||||
# ATA/ATAPI/MFM/RLL support
|
||||
#
|
||||
# CONFIG_IDE is not set
|
||||
|
||||
#
|
||||
# SCSI device support
|
||||
#
|
||||
# CONFIG_RAID_ATTRS is not set
|
||||
# CONFIG_SCSI is not set
|
||||
|
||||
#
|
||||
# Multi-device support (RAID and LVM)
|
||||
#
|
||||
# CONFIG_MD is not set
|
||||
|
||||
#
|
||||
# Fusion MPT device support
|
||||
#
|
||||
# CONFIG_FUSION is not set
|
||||
|
||||
#
|
||||
# IEEE 1394 (FireWire) support
|
||||
#
|
||||
# CONFIG_IEEE1394 is not set
|
||||
|
||||
#
|
||||
# I2O device support
|
||||
#
|
||||
# CONFIG_I2O is not set
|
||||
|
||||
#
|
||||
# Network device support
|
||||
#
|
||||
CONFIG_NETDEVICES=y
|
||||
# CONFIG_DUMMY is not set
|
||||
# CONFIG_BONDING is not set
|
||||
# CONFIG_EQUALIZER is not set
|
||||
# CONFIG_TUN is not set
|
||||
|
||||
#
|
||||
# ARCnet devices
|
||||
#
|
||||
# CONFIG_ARCNET is not set
|
||||
|
||||
#
|
||||
# PHY device support
|
||||
#
|
||||
CONFIG_PHYLIB=y
|
||||
|
||||
#
|
||||
# MII PHY device drivers
|
||||
#
|
||||
# CONFIG_MARVELL_PHY is not set
|
||||
# CONFIG_DAVICOM_PHY is not set
|
||||
# CONFIG_QSEMI_PHY is not set
|
||||
# CONFIG_LXT_PHY is not set
|
||||
# CONFIG_CICADA_PHY is not set
|
||||
|
||||
#
|
||||
# Ethernet (10 or 100Mbit)
|
||||
#
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_MII=y
|
||||
# CONFIG_HAPPYMEAL is not set
|
||||
# CONFIG_SUNGEM is not set
|
||||
# CONFIG_CASSINI is not set
|
||||
# CONFIG_NET_VENDOR_3COM is not set
|
||||
# CONFIG_DM9000 is not set
|
||||
|
||||
#
|
||||
# Tulip family network device support
|
||||
#
|
||||
# CONFIG_NET_TULIP is not set
|
||||
# CONFIG_HP100 is not set
|
||||
CONFIG_NET_PCI=y
|
||||
# CONFIG_PCNET32 is not set
|
||||
# CONFIG_AMD8111_ETH is not set
|
||||
# CONFIG_ADAPTEC_STARFIRE is not set
|
||||
# CONFIG_B44 is not set
|
||||
# CONFIG_FORCEDETH is not set
|
||||
# CONFIG_DGRS is not set
|
||||
# CONFIG_EEPRO100 is not set
|
||||
CONFIG_E100=y
|
||||
# CONFIG_FEALNX is not set
|
||||
# CONFIG_NATSEMI is not set
|
||||
# CONFIG_NE2K_PCI is not set
|
||||
# CONFIG_8139CP is not set
|
||||
# CONFIG_8139TOO is not set
|
||||
# CONFIG_SIS900 is not set
|
||||
# CONFIG_EPIC100 is not set
|
||||
# CONFIG_SUNDANCE is not set
|
||||
# CONFIG_TLAN is not set
|
||||
# CONFIG_VIA_RHINE is not set
|
||||
# CONFIG_LAN_SAA9730 is not set
|
||||
|
||||
#
|
||||
# Ethernet (1000 Mbit)
|
||||
#
|
||||
# CONFIG_ACENIC is not set
|
||||
# CONFIG_DL2K is not set
|
||||
# CONFIG_E1000 is not set
|
||||
# CONFIG_NS83820 is not set
|
||||
# CONFIG_HAMACHI is not set
|
||||
# CONFIG_YELLOWFIN is not set
|
||||
# CONFIG_R8169 is not set
|
||||
# CONFIG_SIS190 is not set
|
||||
# CONFIG_SKGE is not set
|
||||
# CONFIG_SKY2 is not set
|
||||
# CONFIG_SK98LIN is not set
|
||||
# CONFIG_VIA_VELOCITY is not set
|
||||
# CONFIG_TIGON3 is not set
|
||||
# CONFIG_BNX2 is not set
|
||||
|
||||
#
|
||||
# Ethernet (10000 Mbit)
|
||||
#
|
||||
# CONFIG_CHELSIO_T1 is not set
|
||||
# CONFIG_IXGB is not set
|
||||
# CONFIG_S2IO is not set
|
||||
|
||||
#
|
||||
# Token Ring devices
|
||||
#
|
||||
# CONFIG_TR is not set
|
||||
|
||||
#
|
||||
# Wireless LAN (non-hamradio)
|
||||
#
|
||||
# CONFIG_NET_RADIO is not set
|
||||
|
||||
#
|
||||
# Wan interfaces
|
||||
#
|
||||
# CONFIG_WAN is not set
|
||||
# CONFIG_FDDI is not set
|
||||
# CONFIG_HIPPI is not set
|
||||
# CONFIG_PPP is not set
|
||||
# CONFIG_SLIP is not set
|
||||
# CONFIG_SHAPER is not set
|
||||
# CONFIG_NETCONSOLE is not set
|
||||
# CONFIG_NETPOLL is not set
|
||||
# CONFIG_NET_POLL_CONTROLLER is not set
|
||||
|
||||
#
|
||||
# ISDN subsystem
|
||||
#
|
||||
# CONFIG_ISDN is not set
|
||||
|
||||
#
|
||||
# Telephony Support
|
||||
#
|
||||
# CONFIG_PHONE is not set
|
||||
|
||||
#
|
||||
# Input device support
|
||||
#
|
||||
# CONFIG_INPUT is not set
|
||||
|
||||
#
|
||||
# Hardware I/O ports
|
||||
#
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_GAMEPORT is not set
|
||||
|
||||
#
|
||||
# Character devices
|
||||
#
|
||||
# CONFIG_VT is not set
|
||||
# CONFIG_SERIAL_NONSTANDARD is not set
|
||||
|
||||
#
|
||||
# Serial drivers
|
||||
#
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_SERIAL_8250_NR_UARTS=1
|
||||
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
|
||||
# CONFIG_SERIAL_8250_EXTENDED is not set
|
||||
|
||||
#
|
||||
# Non-8250 serial port support
|
||||
#
|
||||
CONFIG_SERIAL_CORE=y
|
||||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
# CONFIG_SERIAL_JSM is not set
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
|
||||
#
|
||||
# IPMI
|
||||
#
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
|
||||
#
|
||||
# Watchdog Cards
|
||||
#
|
||||
# CONFIG_WATCHDOG is not set
|
||||
CONFIG_RTC=y
|
||||
# CONFIG_DTLK is not set
|
||||
# CONFIG_R3964 is not set
|
||||
# CONFIG_APPLICOM is not set
|
||||
|
||||
#
|
||||
# Ftape, the floppy tape device driver
|
||||
#
|
||||
# CONFIG_DRM is not set
|
||||
# CONFIG_RAW_DRIVER is not set
|
||||
|
||||
#
|
||||
# TPM devices
|
||||
#
|
||||
# CONFIG_TCG_TPM is not set
|
||||
# CONFIG_TELCLOCK is not set
|
||||
|
||||
#
|
||||
# I2C support
|
||||
#
|
||||
# CONFIG_I2C is not set
|
||||
|
||||
#
|
||||
# SPI support
|
||||
#
|
||||
# CONFIG_SPI is not set
|
||||
# CONFIG_SPI_MASTER is not set
|
||||
|
||||
#
|
||||
# Dallas's 1-wire bus
|
||||
#
|
||||
# CONFIG_W1 is not set
|
||||
|
||||
#
|
||||
# Hardware Monitoring support
|
||||
#
|
||||
CONFIG_HWMON=y
|
||||
# CONFIG_HWMON_VID is not set
|
||||
# CONFIG_SENSORS_F71805F is not set
|
||||
# CONFIG_HWMON_DEBUG_CHIP is not set
|
||||
|
||||
#
|
||||
# Misc devices
|
||||
#
|
||||
|
||||
#
|
||||
# Multimedia Capabilities Port drivers
|
||||
#
|
||||
|
||||
#
|
||||
# Multimedia devices
|
||||
#
|
||||
# CONFIG_VIDEO_DEV is not set
|
||||
|
||||
#
|
||||
# Digital Video Broadcasting Devices
|
||||
#
|
||||
# CONFIG_DVB is not set
|
||||
|
||||
#
|
||||
# Graphics support
|
||||
#
|
||||
# CONFIG_FB is not set
|
||||
|
||||
#
|
||||
# Sound
|
||||
#
|
||||
# CONFIG_SOUND is not set
|
||||
|
||||
#
|
||||
# USB support
|
||||
#
|
||||
CONFIG_USB_ARCH_HAS_HCD=y
|
||||
CONFIG_USB_ARCH_HAS_OHCI=y
|
||||
# CONFIG_USB is not set
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
||||
#
|
||||
|
||||
#
|
||||
# USB Gadget Support
|
||||
#
|
||||
# CONFIG_USB_GADGET is not set
|
||||
|
||||
#
|
||||
# MMC/SD Card support
|
||||
#
|
||||
# CONFIG_MMC is not set
|
||||
|
||||
#
|
||||
# InfiniBand support
|
||||
#
|
||||
# CONFIG_INFINIBAND is not set
|
||||
|
||||
#
|
||||
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
|
||||
#
|
||||
|
||||
#
|
||||
# File systems
|
||||
#
|
||||
# CONFIG_EXT2_FS is not set
|
||||
# CONFIG_EXT3_FS is not set
|
||||
# CONFIG_REISERFS_FS is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
# CONFIG_FS_POSIX_ACL is not set
|
||||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_OCFS2_FS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_ROMFS_FS is not set
|
||||
CONFIG_INOTIFY=y
|
||||
# CONFIG_QUOTA is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
# CONFIG_AUTOFS_FS is not set
|
||||
# CONFIG_AUTOFS4_FS is not set
|
||||
# CONFIG_FUSE_FS is not set
|
||||
|
||||
#
|
||||
# CD-ROM/DVD Filesystems
|
||||
#
|
||||
# CONFIG_ISO9660_FS is not set
|
||||
# CONFIG_UDF_FS is not set
|
||||
|
||||
#
|
||||
# DOS/FAT/NT Filesystems
|
||||
#
|
||||
# CONFIG_MSDOS_FS is not set
|
||||
# CONFIG_VFAT_FS is not set
|
||||
# CONFIG_NTFS_FS is not set
|
||||
|
||||
#
|
||||
# Pseudo filesystems
|
||||
#
|
||||
CONFIG_PROC_FS=y
|
||||
CONFIG_PROC_KCORE=y
|
||||
CONFIG_SYSFS=y
|
||||
CONFIG_TMPFS=y
|
||||
# CONFIG_HUGETLB_PAGE is not set
|
||||
CONFIG_RAMFS=y
|
||||
# CONFIG_RELAYFS_FS is not set
|
||||
# CONFIG_CONFIGFS_FS is not set
|
||||
|
||||
#
|
||||
# Miscellaneous filesystems
|
||||
#
|
||||
# CONFIG_ADFS_FS is not set
|
||||
# CONFIG_AFFS_FS is not set
|
||||
# CONFIG_HFS_FS is not set
|
||||
# CONFIG_HFSPLUS_FS is not set
|
||||
# CONFIG_BEFS_FS is not set
|
||||
# CONFIG_BFS_FS is not set
|
||||
# CONFIG_EFS_FS is not set
|
||||
# CONFIG_CRAMFS is not set
|
||||
# CONFIG_VXFS_FS is not set
|
||||
# CONFIG_HPFS_FS is not set
|
||||
# CONFIG_QNX4FS_FS is not set
|
||||
# CONFIG_SYSV_FS is not set
|
||||
# CONFIG_UFS_FS is not set
|
||||
|
||||
#
|
||||
# Network File Systems
|
||||
#
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
# CONFIG_NFS_V3_ACL is not set
|
||||
# CONFIG_NFS_V4 is not set
|
||||
# CONFIG_NFS_DIRECTIO is not set
|
||||
# CONFIG_NFSD is not set
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_LOCKD=y
|
||||
CONFIG_LOCKD_V4=y
|
||||
CONFIG_NFS_COMMON=y
|
||||
CONFIG_SUNRPC=y
|
||||
# CONFIG_RPCSEC_GSS_KRB5 is not set
|
||||
# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
||||
# CONFIG_SMB_FS is not set
|
||||
# CONFIG_CIFS is not set
|
||||
# CONFIG_NCP_FS is not set
|
||||
# CONFIG_CODA_FS is not set
|
||||
# CONFIG_AFS_FS is not set
|
||||
# CONFIG_9P_FS is not set
|
||||
|
||||
#
|
||||
# Partition Types
|
||||
#
|
||||
# CONFIG_PARTITION_ADVANCED is not set
|
||||
CONFIG_MSDOS_PARTITION=y
|
||||
|
||||
#
|
||||
# Native Language Support
|
||||
#
|
||||
# CONFIG_NLS is not set
|
||||
|
||||
#
|
||||
# Profiling support
|
||||
#
|
||||
# CONFIG_PROFILING is not set
|
||||
|
||||
#
|
||||
# Kernel hacking
|
||||
#
|
||||
# CONFIG_PRINTK_TIME is not set
|
||||
# CONFIG_MAGIC_SYSRQ is not set
|
||||
# CONFIG_DEBUG_KERNEL is not set
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_CROSSCOMPILE=y
|
||||
CONFIG_CMDLINE="console=ttyS0,115200n8"
|
||||
|
||||
#
|
||||
# Security options
|
||||
#
|
||||
# CONFIG_KEYS is not set
|
||||
# CONFIG_SECURITY is not set
|
||||
|
||||
#
|
||||
# Cryptographic options
|
||||
#
|
||||
# CONFIG_CRYPTO is not set
|
||||
|
||||
#
|
||||
# Hardware crypto devices
|
||||
#
|
||||
|
||||
#
|
||||
# Library routines
|
||||
#
|
||||
CONFIG_CRC_CCITT=y
|
||||
CONFIG_CRC16=y
|
||||
CONFIG_CRC32=y
|
||||
CONFIG_LIBCRC32C=y
|
||||
|
|
@ -0,0 +1,14 @@
|
|||
#
|
||||
# This file is subject to the terms and conditions of the GNU General Public
|
||||
# License. See the file "COPYING" in the main directory of this archive
|
||||
# for more details.
|
||||
#
|
||||
# Copyright 2006 Wind River System, Inc.
|
||||
# Author: Rongkai.Zhan <rongkai.zhan@windriver.com>
|
||||
#
|
||||
# Makefile for the Wind River MIPS 4KC PPMC Eval Board
|
||||
#
|
||||
|
||||
obj-y += int-handler.o irq.o reset.o setup.o time.o pci.o
|
||||
|
||||
EXTRA_AFLAGS := $(CFLAGS)
|
||||
|
|
@ -0,0 +1,59 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 1995, 1996, 1997, 2003 by Ralf Baechle
|
||||
* Copyright (C) Wind River System Inc. Rongkai.Zhan <rongkai.zhan@windriver.com>
|
||||
*/
|
||||
#include <asm/asm.h>
|
||||
#include <asm/mipsregs.h>
|
||||
#include <asm/addrspace.h>
|
||||
#include <asm/regdef.h>
|
||||
#include <asm/stackframe.h>
|
||||
#include <asm/mach-wrppmc/mach-gt64120.h>
|
||||
|
||||
.align 5
|
||||
.set noat
|
||||
NESTED(handle_IRQ, PT_SIZE, sp)
|
||||
SAVE_ALL
|
||||
CLI # Important: mark KERNEL mode !
|
||||
.set at
|
||||
|
||||
mfc0 t0, CP0_CAUSE # get pending interrupts
|
||||
mfc0 t1, CP0_STATUS # get enabled interrupts
|
||||
and t0, t0, t1 # get allowed interrupts
|
||||
andi t0, t0, 0xFF00
|
||||
beqz t0, 1f
|
||||
move a1, sp # Prepare 'struct pt_regs *regs' pointer
|
||||
|
||||
andi t1, t0, CAUSEF_IP7 # CPU Compare/Count internal timer
|
||||
bnez t1, handle_cputimer_irq
|
||||
andi t1, t0, CAUSEF_IP6 # UART 16550 port
|
||||
bnez t1, handle_uart_irq
|
||||
andi t1, t0, CAUSEF_IP3 # PCI INT_A
|
||||
bnez t1, handle_pci_intA_irq
|
||||
|
||||
/* wrong alarm or masked ... */
|
||||
1: j spurious_interrupt
|
||||
nop
|
||||
END(handle_IRQ)
|
||||
|
||||
.align 5
|
||||
handle_cputimer_irq:
|
||||
li a0, WRPPMC_MIPS_TIMER_IRQ
|
||||
jal do_IRQ
|
||||
j ret_from_irq
|
||||
|
||||
.align 5
|
||||
handle_uart_irq:
|
||||
li a0, WRPPMC_UART16550_IRQ
|
||||
jal do_IRQ
|
||||
j ret_from_irq
|
||||
|
||||
.align 5
|
||||
handle_pci_intA_irq:
|
||||
li a0, WRPPMC_PCI_INTA_IRQ
|
||||
jal do_IRQ
|
||||
j ret_from_irq
|
||||
|
||||
|
|
@ -0,0 +1,63 @@
|
|||
/*
|
||||
* irq.c: GT64120 Interrupt Controller
|
||||
*
|
||||
* Copyright (C) 2006, Wind River System Inc.
|
||||
* Author: Rongkai.Zhan, <rongkai.zhan@windriver.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
#include <linux/errno.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel_stat.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/signal.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/ioport.h>
|
||||
#include <linux/timex.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/random.h>
|
||||
#include <linux/bitops.h>
|
||||
#include <asm/bootinfo.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/bitops.h>
|
||||
#include <asm/mipsregs.h>
|
||||
#include <asm/system.h>
|
||||
#include <asm/irq_cpu.h>
|
||||
#include <asm/gt64120.h>
|
||||
|
||||
extern asmlinkage void handle_IRQ(void);
|
||||
|
||||
/**
|
||||
* Initialize GT64120 Interrupt Controller
|
||||
*/
|
||||
void gt64120_init_pic(void)
|
||||
{
|
||||
/* clear CPU Interrupt Cause Registers */
|
||||
GT_WRITE(GT_INTRCAUSE_OFS, (0x1F << 21));
|
||||
GT_WRITE(GT_HINTRCAUSE_OFS, 0x00);
|
||||
|
||||
/* Disable all interrupts from GT64120 bridge chip */
|
||||
GT_WRITE(GT_INTRMASK_OFS, 0x00);
|
||||
GT_WRITE(GT_HINTRMASK_OFS, 0x00);
|
||||
GT_WRITE(GT_PCI0_ICMASK_OFS, 0x00);
|
||||
GT_WRITE(GT_PCI0_HICMASK_OFS, 0x00);
|
||||
}
|
||||
|
||||
void __init arch_init_irq(void)
|
||||
{
|
||||
/* enable all CPU interrupt bits. */
|
||||
set_c0_status(ST0_IM); /* IE bit is still 0 */
|
||||
|
||||
/* Install MIPS Interrupt Trap Vector */
|
||||
set_except_vector(0, handle_IRQ);
|
||||
|
||||
/* IRQ 0 - 7 are for MIPS common irq_cpu controller */
|
||||
mips_cpu_irq_init(0);
|
||||
|
||||
gt64120_init_pic();
|
||||
}
|
||||
|
|
@ -0,0 +1,53 @@
|
|||
/*
|
||||
* pci.c: GT64120 PCI support.
|
||||
*
|
||||
* Copyright (C) 2006, Wind River System Inc. Rongkai.Zhan <rongkai.zhan@windriver.com>
|
||||
*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*/
|
||||
#include <linux/init.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <asm/gt64120.h>
|
||||
|
||||
extern struct pci_ops gt64120_pci_ops;
|
||||
|
||||
static struct resource pci0_io_resource = {
|
||||
.name = "pci_0 io",
|
||||
.start = GT_PCI_IO_BASE,
|
||||
.end = GT_PCI_IO_BASE + GT_PCI_IO_SIZE - 1,
|
||||
.flags = IORESOURCE_IO,
|
||||
};
|
||||
|
||||
static struct resource pci0_mem_resource = {
|
||||
.name = "pci_0 memory",
|
||||
.start = GT_PCI_MEM_BASE,
|
||||
.end = GT_PCI_MEM_BASE + GT_PCI_MEM_SIZE - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
};
|
||||
|
||||
static struct pci_controller hose_0 = {
|
||||
.pci_ops = >64120_pci_ops,
|
||||
.io_resource = &pci0_io_resource,
|
||||
.mem_resource = &pci0_mem_resource,
|
||||
};
|
||||
|
||||
static int __init gt64120_pci_init(void)
|
||||
{
|
||||
u32 tmp;
|
||||
|
||||
tmp = GT_READ(GT_PCI0_CMD_OFS); /* Huh??? -- Ralf */
|
||||
tmp = GT_READ(GT_PCI0_BARE_OFS);
|
||||
|
||||
/* reset the whole PCI I/O space range */
|
||||
ioport_resource.start = GT_PCI_IO_BASE;
|
||||
ioport_resource.end = GT_PCI_IO_BASE + GT_PCI_IO_SIZE - 1;
|
||||
|
||||
register_pci_controller(&hose_0);
|
||||
return 0;
|
||||
}
|
||||
|
||||
arch_initcall(gt64120_pci_init);
|
||||
|
|
@ -0,0 +1,50 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 1997 Ralf Baechle
|
||||
*/
|
||||
#include <linux/sched.h>
|
||||
#include <linux/mm.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/pgtable.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/reboot.h>
|
||||
#include <asm/system.h>
|
||||
#include <asm/cacheflush.h>
|
||||
|
||||
void wrppmc_machine_restart(char *command)
|
||||
{
|
||||
/*
|
||||
* Ouch, we're still alive ... This time we take the silver bullet ...
|
||||
* ... and find that we leave the hardware in a state in which the
|
||||
* kernel in the flush locks up somewhen during of after the PCI
|
||||
* detection stuff.
|
||||
*/
|
||||
local_irq_disable();
|
||||
set_c0_status(ST0_BEV | ST0_ERL);
|
||||
change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
|
||||
flush_cache_all();
|
||||
write_c0_wired(0);
|
||||
__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
|
||||
}
|
||||
|
||||
void wrppmc_machine_halt(void)
|
||||
{
|
||||
local_irq_disable();
|
||||
|
||||
printk(KERN_NOTICE "You can safely turn off the power\n");
|
||||
while (1) {
|
||||
__asm__(
|
||||
".set\tmips3\n\t"
|
||||
"wait\n\t"
|
||||
".set\tmips0"
|
||||
);
|
||||
}
|
||||
}
|
||||
|
||||
void wrppmc_machine_power_off(void)
|
||||
{
|
||||
wrppmc_machine_halt();
|
||||
}
|
||||
|
|
@ -0,0 +1,173 @@
|
|||
/*
|
||||
* setup.c: Setup pointers to hardware dependent routines.
|
||||
*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 1996, 1997, 2004 by Ralf Baechle (ralf@linux-mips.org)
|
||||
* Copyright (C) 2006, Wind River System Inc. Rongkai.zhan <rongkai.zhan@windriver.com>
|
||||
*/
|
||||
#include <linux/config.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/string.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/tty.h>
|
||||
#include <linux/serial.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/pm.h>
|
||||
|
||||
#include <asm/io.h>
|
||||
#include <asm/bootinfo.h>
|
||||
#include <asm/reboot.h>
|
||||
#include <asm/time.h>
|
||||
#include <asm/gt64120.h>
|
||||
|
||||
unsigned long gt64120_base = KSEG1ADDR(0x14000000);
|
||||
|
||||
#ifdef WRPPMC_EARLY_DEBUG
|
||||
|
||||
static volatile unsigned char * wrppmc_led = \
|
||||
(volatile unsigned char *)KSEG1ADDR(WRPPMC_LED_BASE);
|
||||
|
||||
/*
|
||||
* PPMC LED control register:
|
||||
* -) bit[0] controls DS1 LED (1 - OFF, 0 - ON)
|
||||
* -) bit[1] controls DS2 LED (1 - OFF, 0 - ON)
|
||||
* -) bit[2] controls DS4 LED (1 - OFF, 0 - ON)
|
||||
*/
|
||||
void wrppmc_led_on(int mask)
|
||||
{
|
||||
unsigned char value = *wrppmc_led;
|
||||
|
||||
value &= (0xF8 | mask);
|
||||
*wrppmc_led = value;
|
||||
}
|
||||
|
||||
/* If mask = 0, turn off all LEDs */
|
||||
void wrppmc_led_off(int mask)
|
||||
{
|
||||
unsigned char value = *wrppmc_led;
|
||||
|
||||
value |= (0x7 & mask);
|
||||
*wrppmc_led = value;
|
||||
}
|
||||
|
||||
/*
|
||||
* We assume that bootloader has initialized UART16550 correctly
|
||||
*/
|
||||
void __init wrppmc_early_putc(char ch)
|
||||
{
|
||||
static volatile unsigned char *wrppmc_uart = \
|
||||
(volatile unsigned char *)KSEG1ADDR(WRPPMC_UART16550_BASE);
|
||||
unsigned char value;
|
||||
|
||||
/* Wait until Transmit-Holding-Register is empty */
|
||||
while (1) {
|
||||
value = *(wrppmc_uart + 5);
|
||||
if (value & 0x20)
|
||||
break;
|
||||
}
|
||||
|
||||
*wrppmc_uart = ch;
|
||||
}
|
||||
|
||||
void __init wrppmc_early_printk(const char *fmt, ...)
|
||||
{
|
||||
static char pbuf[256] = {'\0', };
|
||||
char *ch = pbuf;
|
||||
va_list args;
|
||||
unsigned int i;
|
||||
|
||||
memset(pbuf, 0, 256);
|
||||
va_start(args, fmt);
|
||||
i = vsprintf(pbuf, fmt, args);
|
||||
va_end(args);
|
||||
|
||||
/* Print the string */
|
||||
while (*ch != '\0') {
|
||||
wrppmc_early_putc(*ch);
|
||||
/* if print '\n', also print '\r' */
|
||||
if (*ch++ == '\n')
|
||||
wrppmc_early_putc('\r');
|
||||
}
|
||||
}
|
||||
#endif /* WRPPMC_EARLY_DEBUG */
|
||||
|
||||
unsigned long __init prom_free_prom_memory(void)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_SERIAL_8250
|
||||
static void wrppmc_setup_serial(void)
|
||||
{
|
||||
struct uart_port up;
|
||||
|
||||
memset(&up, 0x00, sizeof(struct uart_port));
|
||||
|
||||
/*
|
||||
* A note about mapbase/membase
|
||||
* -) mapbase is the physical address of the IO port.
|
||||
* -) membase is an 'ioremapped' cookie.
|
||||
*/
|
||||
up.line = 0;
|
||||
up.type = PORT_16550;
|
||||
up.iotype = UPIO_MEM;
|
||||
up.mapbase = WRPPMC_UART16550_BASE;
|
||||
up.membase = ioremap(up.mapbase, 8);
|
||||
up.irq = WRPPMC_UART16550_IRQ;
|
||||
up.uartclk = WRPPMC_UART16550_CLOCK;
|
||||
up.flags = UPF_SKIP_TEST/* | UPF_BOOT_AUTOCONF */;
|
||||
up.regshift = 0;
|
||||
|
||||
early_serial_setup(&up);
|
||||
}
|
||||
#endif
|
||||
|
||||
void __init plat_setup(void)
|
||||
{
|
||||
extern void wrppmc_time_init(void);
|
||||
extern void wrppmc_timer_setup(struct irqaction *);
|
||||
extern void wrppmc_machine_restart(char *command);
|
||||
extern void wrppmc_machine_halt(void);
|
||||
extern void wrppmc_machine_power_off(void);
|
||||
|
||||
_machine_restart = wrppmc_machine_restart;
|
||||
_machine_halt = wrppmc_machine_halt;
|
||||
pm_power_off = wrppmc_machine_power_off;
|
||||
|
||||
/* Use MIPS Count/Compare Timer */
|
||||
board_time_init = wrppmc_time_init;
|
||||
board_timer_setup = wrppmc_timer_setup;
|
||||
|
||||
/* This makes the operations of 'in/out[bwl]' to the
|
||||
* physical address ( < KSEG0) can work via KSEG1
|
||||
*/
|
||||
set_io_port_base(KSEG1);
|
||||
|
||||
#ifdef CONFIG_SERIAL_8250
|
||||
wrppmc_setup_serial();
|
||||
#endif
|
||||
}
|
||||
|
||||
const char *get_system_type(void)
|
||||
{
|
||||
return "Wind River PPMC (GT64120)";
|
||||
}
|
||||
|
||||
/*
|
||||
* Initializes basic routines and structures pointers, memory size (as
|
||||
* given by the bios and saves the command line.
|
||||
*/
|
||||
void __init prom_init(void)
|
||||
{
|
||||
mips_machgroup = MACH_GROUP_GALILEO;
|
||||
mips_machtype = MACH_EV64120A;
|
||||
|
||||
add_memory_region(WRPPMC_SDRAM_SCS0_BASE, WRPPMC_SDRAM_SCS0_SIZE, BOOT_MEM_RAM);
|
||||
add_memory_region(WRPPMC_BOOTROM_BASE, WRPPMC_BOOTROM_SIZE, BOOT_MEM_ROM_DATA);
|
||||
|
||||
wrppmc_early_printk("prom_init: GT64120 SDRAM Bank 0: 0x%x - 0x%08lx\n",
|
||||
WRPPMC_SDRAM_SCS0_BASE, (WRPPMC_SDRAM_SCS0_BASE + WRPPMC_SDRAM_SCS0_SIZE));
|
||||
}
|
||||
|
|
@ -0,0 +1,57 @@
|
|||
/*
|
||||
* time.c: MIPS CPU Count/Compare timer hookup
|
||||
*
|
||||
* Author: Mark.Zhan, <rongkai.zhan@windriver.com>
|
||||
*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 1996, 1997, 2004 by Ralf Baechle (ralf@linux-mips.org)
|
||||
* Copyright (C) 2006, Wind River System Inc.
|
||||
*/
|
||||
#include <linux/config.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/string.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/param.h> /* for HZ */
|
||||
#include <linux/irq.h>
|
||||
#include <linux/timex.h>
|
||||
#include <linux/interrupt.h>
|
||||
|
||||
#include <asm/reboot.h>
|
||||
#include <asm/time.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/bootinfo.h>
|
||||
#include <asm/gt64120.h>
|
||||
|
||||
#define WRPPMC_CPU_CLK_FREQ 40000000 /* 40MHZ */
|
||||
|
||||
void __init wrppmc_timer_setup(struct irqaction *irq)
|
||||
{
|
||||
/* Install ISR for timer interrupt */
|
||||
setup_irq(WRPPMC_MIPS_TIMER_IRQ, irq);
|
||||
|
||||
/* to generate the first timer interrupt */
|
||||
write_c0_compare(mips_hpt_frequency/HZ);
|
||||
write_c0_count(0);
|
||||
}
|
||||
|
||||
/*
|
||||
* Estimate CPU frequency. Sets mips_hpt_frequency as a side-effect
|
||||
*
|
||||
* NOTE: We disable all GT64120 timers, and use MIPS processor internal
|
||||
* timer as the source of kernel clock tick.
|
||||
*/
|
||||
void __init wrppmc_time_init(void)
|
||||
{
|
||||
/* Disable GT64120 timers */
|
||||
GT_WRITE(GT_TC_CONTROL_OFS, 0x00);
|
||||
GT_WRITE(GT_TC0_OFS, 0x00);
|
||||
GT_WRITE(GT_TC1_OFS, 0x00);
|
||||
GT_WRITE(GT_TC2_OFS, 0x00);
|
||||
GT_WRITE(GT_TC3_OFS, 0x00);
|
||||
|
||||
/* Use MIPS compare/count internal timer */
|
||||
mips_hpt_frequency = WRPPMC_CPU_CLK_FREQ;
|
||||
}
|
||||
|
|
@ -57,3 +57,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o ops-tx4927.o
|
|||
obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-tx4938.o ops-tx4938.o
|
||||
obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
|
||||
obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
|
||||
obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,37 @@
|
|||
/*
|
||||
* fixup-wrppmc.c: PPMC board specific PCI fixup
|
||||
*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 2006, Wind River Inc. Rongkai.zhan (rongkai.zhan@windriver.com)
|
||||
*/
|
||||
#include <linux/init.h>
|
||||
#include <linux/pci.h>
|
||||
#include <asm/gt64120.h>
|
||||
|
||||
/* PCI interrupt pins */
|
||||
#define PCI_INTA 1
|
||||
#define PCI_INTB 2
|
||||
#define PCI_INTC 3
|
||||
#define PCI_INTD 4
|
||||
|
||||
#define PCI_SLOT_MAXNR 32 /* Each PCI bus has 32 physical slots */
|
||||
|
||||
static char pci_irq_tab[PCI_SLOT_MAXNR][5] __initdata = {
|
||||
/* 0 INTA INTB INTC INTD */
|
||||
[0] = {0, 0, 0, 0, 0}, /* Slot 0: GT64120 PCI bridge */
|
||||
[6] = {0, WRPPMC_PCI_INTA_IRQ, 0, 0, 0},
|
||||
};
|
||||
|
||||
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
||||
{
|
||||
return pci_irq_tab[slot][pin];
|
||||
}
|
||||
|
||||
/* Do platform specific device initialization at pci_enable_device() time */
|
||||
int pcibios_plat_dev_init(struct pci_dev *dev)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -0,0 +1,84 @@
|
|||
/*
|
||||
* This is a direct copy of the ev96100.h file, with a global
|
||||
* search and replace. The numbers are the same.
|
||||
*
|
||||
* The reason I'm duplicating this is so that the 64120/96100
|
||||
* defines won't be confusing in the source code.
|
||||
*/
|
||||
#ifndef __ASM_MIPS_GT64120_H
|
||||
#define __ASM_MIPS_GT64120_H
|
||||
|
||||
/*
|
||||
* This is the CPU physical memory map of PPMC Board:
|
||||
*
|
||||
* 0x00000000-0x03FFFFFF - 64MB SDRAM (SCS[0]#)
|
||||
* 0x1C000000-0x1C000000 - LED (CS0)
|
||||
* 0x1C800000-0x1C800007 - UART 16550 port (CS1)
|
||||
* 0x1F000000-0x1F000000 - MailBox (CS3)
|
||||
* 0x1FC00000-0x20000000 - 4MB Flash (BOOT CS)
|
||||
*/
|
||||
|
||||
#define WRPPMC_SDRAM_SCS0_BASE 0x00000000
|
||||
#define WRPPMC_SDRAM_SCS0_SIZE 0x04000000
|
||||
|
||||
#define WRPPMC_UART16550_BASE 0x1C800000
|
||||
#define WRPPMC_UART16550_CLOCK 3686400 /* 3.68MHZ */
|
||||
|
||||
#define WRPPMC_LED_BASE 0x1C000000
|
||||
#define WRPPMC_MBOX_BASE 0x1F000000
|
||||
|
||||
#define WRPPMC_BOOTROM_BASE 0x1FC00000
|
||||
#define WRPPMC_BOOTROM_SIZE 0x00400000 /* 4M Flash */
|
||||
|
||||
#define WRPPMC_MIPS_TIMER_IRQ 7 /* MIPS compare/count timer interrupt */
|
||||
#define WRPPMC_UART16550_IRQ 6
|
||||
#define WRPPMC_PCI_INTA_IRQ 3
|
||||
|
||||
/*
|
||||
* PCI Bus I/O and Memory resources allocation
|
||||
*
|
||||
* NOTE: We only have PCI_0 hose interface
|
||||
*/
|
||||
#define GT_PCI_MEM_BASE 0x13000000UL
|
||||
#define GT_PCI_MEM_SIZE 0x02000000UL
|
||||
#define GT_PCI_IO_BASE 0x11000000UL
|
||||
#define GT_PCI_IO_SIZE 0x02000000UL
|
||||
#define GT_ISA_IO_BASE PCI_IO_BASE
|
||||
|
||||
/*
|
||||
* PCI interrupts will come in on either the INTA or INTD interrups lines,
|
||||
* which are mapped to the #2 and #5 interrupt pins of the MIPS. On our
|
||||
* boards, they all either come in on IntD or they all come in on IntA, they
|
||||
* aren't mixed. There can be numerous PCI interrupts, so we keep a list of the
|
||||
* "requested" interrupt numbers and go through the list whenever we get an
|
||||
* IntA/D.
|
||||
*
|
||||
* Interrupts < 8 are directly wired to the processor; PCI INTA is 8 and
|
||||
* INTD is 11.
|
||||
*/
|
||||
#define GT_TIMER 4
|
||||
#define GT_INTA 2
|
||||
#define GT_INTD 5
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
/*
|
||||
* GT64120 internal register space base address
|
||||
*/
|
||||
extern unsigned long gt64120_base;
|
||||
|
||||
#define GT64120_BASE (gt64120_base)
|
||||
|
||||
/* define WRPPMC_EARLY_DEBUG to enable early output something to UART */
|
||||
#undef WRPPMC_EARLY_DEBUG
|
||||
|
||||
#ifdef WRPPMC_EARLY_DEBUG
|
||||
extern void wrppmc_led_on(int mask);
|
||||
extern void wrppmc_led_off(int mask);
|
||||
extern void wrppmc_early_printk(const char *fmt, ...);
|
||||
#else
|
||||
#define wrppmc_early_printk(fmt, ...) do {} while (0)
|
||||
#endif /* WRPPMC_EARLY_DEBUG */
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __ASM_MIPS_GT64120_H */
|
||||
Loading…
Reference in New Issue