From 6fd592daae2182adc47f405e20d07f34f52d07dd Mon Sep 17 00:00:00 2001 From: "Carlos R. Mafra" Date: Mon, 5 May 2008 20:11:22 -0300 Subject: [PATCH 001/821] x86: clean up computation of HPET .mult variables While reading through the HPET code I realized that the computation of .mult variables could be done with less lines of code, resulting in a 1.6% text size saving for hpet.o So I propose the following patch, which applies against today's Linus -git tree. >From 0c6507e400e9ca5f7f14331e18f8c12baf75a9d3 Mon Sep 17 00:00:00 2001 From: Carlos R. Mafra Date: Mon, 5 May 2008 19:38:53 -0300 The computation of clocksource_hpet.mult tmp = (u64)hpet_period << HPET_SHIFT; do_div(tmp, FSEC_PER_NSEC); clocksource_hpet.mult = (u32)tmp; can be streamlined if we note that it is equal to clocksource_hpet.mult = div_sc(hpet_period, FSEC_PER_NSEC, HPET_SHIFT); Furthermore, the computation of hpet_clockevent.mult uint64_t hpet_freq; hpet_freq = 1000000000000000ULL; do_div(hpet_freq, hpet_period); hpet_clockevent.mult = div_sc((unsigned long) hpet_freq, NSEC_PER_SEC, hpet_clockevent.shift); can also be streamlined with the observation that hpet_period and hpet_freq are inverse to each other (in proper units). So instead of computing hpet_freq and using (schematically) div_sc(hpet_freq, 10^9, shift) we use the trick of calling with the arguments in reverse order, div_sc(10^6, hpet_period, shift). The different power of ten is due to frequency being in Hertz (1/sec) and the period being in units of femtosecond. Explicitly, mult = (hpet_freq * 2^shift)/10^9 (before) mult = (10^6 * 2^shift)/hpet_period (after) because hpet_freq = 10^15/hpet_period. The comments in the code are also updated to reflect the changes. As a result, text data bss dec hex filename 2957 425 92 3474 d92 arch/x86/kernel/hpet.o 3006 425 92 3523 dc3 arch/x86/kernel/hpet.o.old a 1.6% reduction in text size. Signed-off-by: Carlos R. Mafra Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/hpet.c | 43 ++++++++++++++++++------------------------ 1 file changed, 18 insertions(+), 25 deletions(-) diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 9b5cfcdfc426..ea230ec69057 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -17,7 +17,7 @@ /* FSEC = 10^-15 NSEC = 10^-9 */ -#define FSEC_PER_NSEC 1000000 +#define FSEC_PER_NSEC 1000000L /* * HPET address is set in acpi/boot.c, when an ACPI entry exists @@ -206,20 +206,19 @@ static void hpet_enable_legacy_int(void) static void hpet_legacy_clockevent_register(void) { - uint64_t hpet_freq; - /* Start HPET legacy interrupts */ hpet_enable_legacy_int(); /* - * The period is a femto seconds value. We need to calculate the - * scaled math multiplication factor for nanosecond to hpet tick - * conversion. + * The mult factor is defined as (include/linux/clockchips.h) + * mult/2^shift = cyc/ns (in contrast to ns/cyc in clocksource.h) + * hpet_period is in units of femtoseconds (per cycle), so + * mult/2^shift = cyc/ns = 10^6/hpet_period + * mult = (10^6 * 2^shift)/hpet_period + * mult = (FSEC_PER_NSEC << hpet_clockevent.shift)/hpet_period */ - hpet_freq = 1000000000000000ULL; - do_div(hpet_freq, hpet_period); - hpet_clockevent.mult = div_sc((unsigned long) hpet_freq, - NSEC_PER_SEC, hpet_clockevent.shift); + hpet_clockevent.mult = div_sc((unsigned long) FSEC_PER_NSEC, + hpet_period, hpet_clockevent.shift); /* Calculate the min / max delta */ hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, &hpet_clockevent); @@ -324,7 +323,7 @@ static struct clocksource clocksource_hpet = { static int hpet_clocksource_register(void) { - u64 tmp, start, now; + u64 start, now; cycle_t t1; /* Start the counter */ @@ -351,21 +350,15 @@ static int hpet_clocksource_register(void) return -ENODEV; } - /* Initialize and register HPET clocksource - * - * hpet period is in femto seconds per cycle - * so we need to convert this to ns/cyc units - * approximated by mult/2^shift - * - * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift - * fsec/cyc * 1ns/1000000fsec * 2^shift = mult - * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult - * (fsec/cyc << shift)/1000000 = mult - * (hpet_period << shift)/FSEC_PER_NSEC = mult + /* + * The definition of mult is (include/linux/clocksource.h) + * mult/2^shift = ns/cyc and hpet_period is in units of fsec/cyc + * so we first need to convert hpet_period to ns/cyc units: + * mult/2^shift = ns/cyc = hpet_period/10^6 + * mult = (hpet_period * 2^shift)/10^6 + * mult = (hpet_period << shift)/FSEC_PER_NSEC */ - tmp = (u64)hpet_period << HPET_SHIFT; - do_div(tmp, FSEC_PER_NSEC); - clocksource_hpet.mult = (u32)tmp; + clocksource_hpet.mult = div_sc(hpet_period, FSEC_PER_NSEC, HPET_SHIFT); clocksource_register(&clocksource_hpet); From e8aa4667baf74dfd85fbaab86861465acb811085 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Fri, 9 May 2008 11:49:11 +0200 Subject: [PATCH 002/821] x86: enable hpet=force for AMD SB400 Add quirk to allow forced usage of HPET on ATI SB400. I stumbled over machines where HPET is enabled but not reported by BIOS. This patch configures the HPET base address and makes it known to the OS. Signed-off-by: Andreas Herrmann Signed-off-by: Thomas Gleixner --- arch/x86/kernel/quirks.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index d89a648fe710..5fe6bd5cc4c7 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -65,6 +65,7 @@ static enum { ICH_FORCE_HPET_RESUME, VT8237_FORCE_HPET_RESUME, NVIDIA_FORCE_HPET_RESUME, + ATI_FORCE_HPET_RESUME, } force_hpet_resume_type; static void __iomem *rcba_base; @@ -330,6 +331,31 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, vt8237_force_enable_hpet); +static void ati_force_hpet_resume(void) +{ + pci_write_config_dword(cached_dev, 0x14, 0xfed00000); + printk(KERN_DEBUG "Force enabled HPET at resume\n"); +} + +static void ati_force_enable_hpet(struct pci_dev *dev) +{ + u32 uninitialized_var(val); + + if (!hpet_force_user || hpet_address || force_hpet_address) + return; + + pci_write_config_dword(dev, 0x14, 0xfed00000); + pci_read_config_dword(dev, 0x14, &val); + force_hpet_address = val; + force_hpet_resume_type = ATI_FORCE_HPET_RESUME; + dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n", + force_hpet_address); + cached_dev = dev; + return; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS, + ati_force_enable_hpet); + /* * Undocumented chipset feature taken from LinuxBIOS. */ @@ -397,6 +423,9 @@ void force_hpet_resume(void) case NVIDIA_FORCE_HPET_RESUME: nvidia_force_hpet_resume(); return; + case ATI_FORCE_HPET_RESUME: + ati_force_hpet_resume(); + return; default: break; } From 7c4728f4a865067d96fb84f1d9c65e0ccd1f355d Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 10 May 2008 21:42:14 +0200 Subject: [PATCH 003/821] x86: print info about available HPET quirk We have a lot of HPET quirks available which might force enable HPET even when the BIOS does not enable it. Some of those quirks depend on the command line option "hpet=force". Andrew pointed out that hoping that the user will find out about this boot option is not really helpful. Emit a kernel info which informs the user about the "hpet=force" boot option when we enter a quirk which depends on this option and the user did not provide it. Signed-off-by: Thomas Gleixner --- arch/x86/kernel/quirks.c | 29 ++++++++++++++++++++++++++--- 1 file changed, 26 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index 5fe6bd5cc4c7..ddbf34d16a01 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -175,6 +175,12 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, static struct pci_dev *cached_dev; +static void hpet_print_force_info(void) +{ + printk(KERN_INFO "HPET not enabled in BIOS. " + "You might try hpet=force boot option\n"); +} + static void old_ich_force_hpet_resume(void) { u32 val; @@ -254,6 +260,8 @@ static void old_ich_force_enable_hpet_user(struct pci_dev *dev) { if (hpet_force_user) old_ich_force_enable_hpet(dev); + else + hpet_print_force_info(); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, @@ -291,9 +299,14 @@ static void vt8237_force_enable_hpet(struct pci_dev *dev) { u32 uninitialized_var(val); - if (!hpet_force_user || hpet_address || force_hpet_address) + if (hpet_address || force_hpet_address) return; + if (!hpet_force_user) { + hpet_print_force_info(); + return; + } + pci_read_config_dword(dev, 0x68, &val); /* * Bit 7 is HPET enable bit. @@ -341,9 +354,14 @@ static void ati_force_enable_hpet(struct pci_dev *dev) { u32 uninitialized_var(val); - if (!hpet_force_user || hpet_address || force_hpet_address) + if (hpet_address || force_hpet_address) return; + if (!hpet_force_user) { + hpet_print_force_info(); + return; + } + pci_write_config_dword(dev, 0x14, 0xfed00000); pci_read_config_dword(dev, 0x14, &val); force_hpet_address = val; @@ -369,9 +387,14 @@ static void nvidia_force_enable_hpet(struct pci_dev *dev) { u32 uninitialized_var(val); - if (!hpet_force_user || hpet_address || force_hpet_address) + if (hpet_address || force_hpet_address) return; + if (!hpet_force_user) { + hpet_print_force_info(); + return; + } + pci_write_config_dword(dev, 0x44, 0xfed00001); pci_read_config_dword(dev, 0x44, &val); force_hpet_address = val & 0xfffffffe; From 8edc5cc5ec880c96de8e6686fb0d7a5231e91c05 Mon Sep 17 00:00:00 2001 From: Venki Pallipadi Date: Mon, 12 May 2008 15:43:34 +0200 Subject: [PATCH 004/821] x86: remove 6 bank limitation in 64 bit MCE reporting code Eliminate the 6 bank restriction in 64 bit mce reporting code. This restriction is artificial (due to static creation of sysfs files) and 32 bit code does not have any such restriction. This change helps in reporting the details of machine checks on a machine check exception with errors in bank 6 and above on CPUs that support those banks. Without the patch, machine check errors in those banks are not reported. We still have 128 (MCE_EXTENDED_BANK) bank restriction instead of max 256 supported in hardware. That is not changed in the patch below as it will have some user level mcelog utility dependency, with bank 128 being used for thermal reporting currently. The patch below does not create sysfs control (bankNctl) for banks higher than 6 as well. That needs some pre-cleanup in /sysfs mce layout, removal of per cpu /sysfs entries for bankctl as they are really global system level control today. That change will follow. This basic change is critical to report the detailed errors on banks higher than 6. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mcheck/mce_64.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index e07e8c068ae0..f1f3f5e163b7 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -31,7 +31,7 @@ #include #define MISC_MCELOG_MINOR 227 -#define NR_BANKS 6 +#define NR_SYSFS_BANKS 6 atomic_t mce_entry; @@ -46,7 +46,7 @@ static int mce_dont_init; */ static int tolerant = 1; static int banks; -static unsigned long bank[NR_BANKS] = { [0 ... NR_BANKS-1] = ~0UL }; +static unsigned long bank[NR_SYSFS_BANKS] = { [0 ... NR_SYSFS_BANKS-1] = ~0UL }; static unsigned long notify_user; static int rip_msr; static int mce_bootlog = -1; @@ -209,7 +209,7 @@ void do_machine_check(struct pt_regs * regs, long error_code) barrier(); for (i = 0; i < banks; i++) { - if (!bank[i]) + if (i < NR_SYSFS_BANKS && !bank[i]) continue; m.misc = 0; @@ -444,9 +444,10 @@ static void mce_init(void *dummy) rdmsrl(MSR_IA32_MCG_CAP, cap); banks = cap & 0xff; - if (banks > NR_BANKS) { - printk(KERN_INFO "MCE: warning: using only %d banks\n", banks); - banks = NR_BANKS; + if (banks > MCE_EXTENDED_BANK) { + printk(KERN_INFO "MCE: warning: using only %d banks\n", + MCE_EXTENDED_BANK); + banks = MCE_EXTENDED_BANK; } /* Use accurate RIP reporting if available. */ if ((cap & (1<<9)) && ((cap >> 16) & 0xff) >= 9) @@ -462,7 +463,7 @@ static void mce_init(void *dummy) wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); for (i = 0; i < banks; i++) { - wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]); + wrmsrl(MSR_IA32_MC0_CTL+4*i, ~0UL); wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0); } } @@ -766,7 +767,10 @@ DEFINE_PER_CPU(struct sys_device, device_mce); } \ static SYSDEV_ATTR(name, 0644, show_ ## name, set_ ## name); -/* TBD should generate these dynamically based on number of available banks */ +/* + * TBD should generate these dynamically based on number of available banks. + * Have only 6 contol banks in /sysfs until then. + */ ACCESSOR(bank0ctl,bank[0],mce_restart()) ACCESSOR(bank1ctl,bank[1],mce_restart()) ACCESSOR(bank2ctl,bank[2],mce_restart()) From 1c7d06d419dbe82c76fbb4d3e1fa61b2da2dc00b Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 30 Apr 2008 22:12:05 +0200 Subject: [PATCH 005/821] revert: thread_info.h change temporarily revert parts of "signals: x86 TS_RESTORE_SIGMASK". Signed-off-by: Ingo Molnar --- include/asm-x86/thread_info_32.h | 13 ++----------- include/asm-x86/thread_info_64.h | 13 ++----------- 2 files changed, 4 insertions(+), 22 deletions(-) diff --git a/include/asm-x86/thread_info_32.h b/include/asm-x86/thread_info_32.h index b6338829d1a8..531859962096 100644 --- a/include/asm-x86/thread_info_32.h +++ b/include/asm-x86/thread_info_32.h @@ -131,6 +131,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_SYSCALL_EMU 5 /* syscall emulation active */ #define TIF_SYSCALL_AUDIT 6 /* syscall auditing active */ #define TIF_SECCOMP 7 /* secure computing */ +#define TIF_RESTORE_SIGMASK 8 /* restore signal mask in do_signal() */ #define TIF_HRTICK_RESCHED 9 /* reprogram hrtick timer */ #define TIF_MEMDIE 16 #define TIF_DEBUG 17 /* uses debug registers */ @@ -150,6 +151,7 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU) #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) +#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) #define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED) #define _TIF_DEBUG (1 << TIF_DEBUG) #define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) @@ -186,20 +188,9 @@ static inline struct thread_info *current_thread_info(void) this quantum (SMP) */ #define TS_POLLING 0x0002 /* True if in idle loop and not sleeping */ -#define TS_RESTORE_SIGMASK 0x0004 /* restore signal mask in do_signal() */ #define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) -#ifndef __ASSEMBLY__ -#define HAVE_SET_RESTORE_SIGMASK 1 -static inline void set_restore_sigmask(void) -{ - struct thread_info *ti = current_thread_info(); - ti->status |= TS_RESTORE_SIGMASK; - set_bit(TIF_SIGPENDING, &ti->flags); -} -#endif /* !__ASSEMBLY__ */ - #endif /* __KERNEL__ */ #endif /* _ASM_THREAD_INFO_H */ diff --git a/include/asm-x86/thread_info_64.h b/include/asm-x86/thread_info_64.h index cb69f70abba1..ed664e874dec 100644 --- a/include/asm-x86/thread_info_64.h +++ b/include/asm-x86/thread_info_64.h @@ -109,6 +109,7 @@ static inline struct thread_info *stack_thread_info(void) #define TIF_IRET 5 /* force IRET */ #define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ #define TIF_SECCOMP 8 /* secure computing */ +#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal */ #define TIF_MCE_NOTIFY 10 /* notify userspace of an MCE */ #define TIF_HRTICK_RESCHED 11 /* reprogram hrtick timer */ /* 16 free */ @@ -132,6 +133,7 @@ static inline struct thread_info *stack_thread_info(void) #define _TIF_IRET (1 << TIF_IRET) #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) +#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) #define _TIF_MCE_NOTIFY (1 << TIF_MCE_NOTIFY) #define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED) #define _TIF_IA32 (1 << TIF_IA32) @@ -176,20 +178,9 @@ static inline struct thread_info *stack_thread_info(void) #define TS_COMPAT 0x0002 /* 32bit syscall active */ #define TS_POLLING 0x0004 /* true if in idle loop and not sleeping */ -#define TS_RESTORE_SIGMASK 0x0008 /* restore signal mask in do_signal() */ #define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) -#ifndef __ASSEMBLY__ -#define HAVE_SET_RESTORE_SIGMASK 1 -static inline void set_restore_sigmask(void) -{ - struct thread_info *ti = current_thread_info(); - ti->status |= TS_RESTORE_SIGMASK; - set_bit(TIF_SIGPENDING, &ti->flags); -} -#endif /* !__ASSEMBLY__ */ - #endif /* __KERNEL__ */ #endif /* _ASM_THREAD_INFO_H */ From 2052e8d40ad58b1d364f900e70edfda62caa0874 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Mon, 12 May 2008 15:43:41 +0200 Subject: [PATCH 006/821] x86: merge thread_info.h Simple merge of both thread_info_32.h and thread_info_64.h into thread_info.h. Comments for #ifndef __ASM_THREAD_INFO_H and #ifdef __KERNEL__ are the same. Signed-off-by: Christoph Lameter Signed-off-by: Ingo Molnar --- include/asm-x86/thread_info.h | 368 ++++++++++++++++++++++++++++++- include/asm-x86/thread_info_32.h | 196 ---------------- include/asm-x86/thread_info_64.h | 186 ---------------- 3 files changed, 365 insertions(+), 385 deletions(-) delete mode 100644 include/asm-x86/thread_info_32.h delete mode 100644 include/asm-x86/thread_info_64.h diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index 77244f17993f..d59384ac0ba6 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -1,10 +1,372 @@ +/* thread_info.h: low-level thread information + * + * Copyright (C) 2002 David Howells (dhowells@redhat.com) + * - Incorporating suggestions made by Linus Torvalds and Dave Miller + */ + #ifndef _ASM_X86_THREAD_INFO_H +#define _ASM_X86_THREAD_INFO_H + #ifdef CONFIG_X86_32 -# include "thread_info_32.h" -#else -# include "thread_info_64.h" +#include +#include + +#ifndef __ASSEMBLY__ +#include #endif +/* + * low level task data that entry.S needs immediate access to + * - this struct should fit entirely inside of one cache line + * - this struct shares the supervisor stack pages + * - if the contents of this structure are changed, + * the assembly constants must also be changed + */ +#ifndef __ASSEMBLY__ + +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + unsigned long status; /* thread-synchronous flags */ + __u32 cpu; /* current CPU */ + int preempt_count; /* 0 => preemptable, + <0 => BUG */ + mm_segment_t addr_limit; /* thread address space: + 0-0xBFFFFFFF user-thread + 0-0xFFFFFFFF kernel-thread + */ + void *sysenter_return; + struct restart_block restart_block; + unsigned long previous_esp; /* ESP of the previous stack in + case of nested (IRQ) stacks + */ + __u8 supervisor_stack[0]; +}; + +#else /* !__ASSEMBLY__ */ + +#include + +#endif + +#define PREEMPT_ACTIVE 0x10000000 +#ifdef CONFIG_4KSTACKS +#define THREAD_SIZE (4096) +#else +#define THREAD_SIZE (8192) +#endif + +#define STACK_WARN (THREAD_SIZE/8) +/* + * macros/functions for gaining access to the thread information structure + * + * preempt_count needs to be 1 initially, until the scheduler is functional. + */ +#ifndef __ASSEMBLY__ + +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + + +/* how to get the current stack pointer from C */ +register unsigned long current_stack_pointer asm("esp") __used; + +/* how to get the thread information struct from C */ +static inline struct thread_info *current_thread_info(void) +{ + return (struct thread_info *) + (current_stack_pointer & ~(THREAD_SIZE - 1)); +} + +/* thread information allocation */ +#ifdef CONFIG_DEBUG_STACK_USAGE +#define alloc_thread_info(tsk) ((struct thread_info *) \ + __get_free_pages(GFP_KERNEL | __GFP_ZERO, get_order(THREAD_SIZE))) +#else +#define alloc_thread_info(tsk) ((struct thread_info *) \ + __get_free_pages(GFP_KERNEL, get_order(THREAD_SIZE))) +#endif + +#else /* !__ASSEMBLY__ */ + +/* how to get the thread information struct from ASM */ +#define GET_THREAD_INFO(reg) \ + movl $-THREAD_SIZE, reg; \ + andl %esp, reg + +/* use this one if reg already contains %esp */ +#define GET_THREAD_INFO_WITH_ESP(reg) \ + andl $-THREAD_SIZE, reg + +#endif + +/* + * thread information flags + * - these are process state flags that various + * assembly files may need to access + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 1 /* signal pending */ +#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ +#define TIF_SINGLESTEP 3 /* restore singlestep on return to + user mode */ +#define TIF_IRET 4 /* return with iret */ +#define TIF_SYSCALL_EMU 5 /* syscall emulation active */ +#define TIF_SYSCALL_AUDIT 6 /* syscall auditing active */ +#define TIF_SECCOMP 7 /* secure computing */ +#define TIF_RESTORE_SIGMASK 8 /* restore signal mask in do_signal() */ +#define TIF_HRTICK_RESCHED 9 /* reprogram hrtick timer */ +#define TIF_MEMDIE 16 +#define TIF_DEBUG 17 /* uses debug registers */ +#define TIF_IO_BITMAP 18 /* uses I/O bitmap */ +#define TIF_FREEZE 19 /* is freezing for suspend */ +#define TIF_NOTSC 20 /* TSC is not accessible in userland */ +#define TIF_FORCED_TF 21 /* true if TF in eflags artificially */ +#define TIF_DEBUGCTLMSR 22 /* uses thread_struct.debugctlmsr */ +#define TIF_DS_AREA_MSR 23 /* uses thread_struct.ds_area_msr */ +#define TIF_BTS_TRACE_TS 24 /* record scheduling event timestamps */ + +#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) +#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) +#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) +#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) +#define _TIF_IRET (1 << TIF_IRET) +#define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU) +#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) +#define _TIF_SECCOMP (1 << TIF_SECCOMP) +#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) +#define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED) +#define _TIF_DEBUG (1 << TIF_DEBUG) +#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) +#define _TIF_FREEZE (1 << TIF_FREEZE) +#define _TIF_NOTSC (1 << TIF_NOTSC) +#define _TIF_FORCED_TF (1 << TIF_FORCED_TF) +#define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR) +#define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR) +#define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS) + +/* work to do on interrupt/exception return */ +#define _TIF_WORK_MASK \ + (0x0000FFFF & ~(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ + _TIF_SECCOMP | _TIF_SYSCALL_EMU)) +/* work to do on any return to u-space */ +#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP) + +/* flags to check in __switch_to() */ +#define _TIF_WORK_CTXSW \ + (_TIF_IO_BITMAP | _TIF_NOTSC | _TIF_DEBUGCTLMSR | \ + _TIF_DS_AREA_MSR | _TIF_BTS_TRACE_TS) +#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW +#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW | _TIF_DEBUG) + + +/* + * Thread-synchronous status. + * + * This is different from the flags in that nobody else + * ever touches our thread-synchronous status, so we don't + * have to worry about atomic accesses. + */ +#define TS_USEDFPU 0x0001 /* FPU was used by this task + this quantum (SMP) */ +#define TS_POLLING 0x0002 /* True if in idle loop + and not sleeping */ + +#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) + +#else /* X86_32 */ + +#include +#include +#include + +/* + * low level task data that entry.S needs immediate access to + * - this struct should fit entirely inside of one cache line + * - this struct shares the supervisor stack pages + */ +#ifndef __ASSEMBLY__ +struct task_struct; +struct exec_domain; +#include + +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + __u32 flags; /* low level flags */ + __u32 status; /* thread synchronous flags */ + __u32 cpu; /* current CPU */ + int preempt_count; /* 0 => preemptable, + <0 => BUG */ + mm_segment_t addr_limit; + struct restart_block restart_block; +#ifdef CONFIG_IA32_EMULATION + void __user *sysenter_return; +#endif +}; +#endif + +/* + * macros/functions for gaining access to the thread information structure + * preempt_count needs to be 1 initially, until the scheduler is functional. + */ +#ifndef __ASSEMBLY__ +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +static inline struct thread_info *current_thread_info(void) +{ + struct thread_info *ti; + ti = (void *)(read_pda(kernelstack) + PDA_STACKOFFSET - THREAD_SIZE); + return ti; +} + +/* do not use in interrupt context */ +static inline struct thread_info *stack_thread_info(void) +{ + struct thread_info *ti; + asm("andq %%rsp,%0; " : "=r" (ti) : "0" (~(THREAD_SIZE - 1))); + return ti; +} + +/* thread information allocation */ +#ifdef CONFIG_DEBUG_STACK_USAGE +#define THREAD_FLAGS (GFP_KERNEL | __GFP_ZERO) +#else +#define THREAD_FLAGS GFP_KERNEL +#endif + +#define alloc_thread_info(tsk) \ + ((struct thread_info *)__get_free_pages(THREAD_FLAGS, THREAD_ORDER)) + +#else /* !__ASSEMBLY__ */ + +/* how to get the thread information struct from ASM */ +#define GET_THREAD_INFO(reg) \ + movq %gs:pda_kernelstack,reg ; \ + subq $(THREAD_SIZE-PDA_STACKOFFSET),reg + +#endif + +/* + * thread information flags + * - these are process state flags that various assembly files + * may need to access + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + * Warning: layout of LSW is hardcoded in entry.S + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 2 /* signal pending */ +#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ +#define TIF_SINGLESTEP 4 /* reenable singlestep on user return*/ +#define TIF_IRET 5 /* force IRET */ +#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ +#define TIF_SECCOMP 8 /* secure computing */ +#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal */ +#define TIF_MCE_NOTIFY 10 /* notify userspace of an MCE */ +#define TIF_HRTICK_RESCHED 11 /* reprogram hrtick timer */ +/* 16 free */ +#define TIF_IA32 17 /* 32bit process */ +#define TIF_FORK 18 /* ret_from_fork */ +#define TIF_ABI_PENDING 19 +#define TIF_MEMDIE 20 +#define TIF_DEBUG 21 /* uses debug registers */ +#define TIF_IO_BITMAP 22 /* uses I/O bitmap */ +#define TIF_FREEZE 23 /* is freezing for suspend */ +#define TIF_FORCED_TF 24 /* true if TF in eflags artificially */ +#define TIF_DEBUGCTLMSR 25 /* uses thread_struct.debugctlmsr */ +#define TIF_DS_AREA_MSR 26 /* uses thread_struct.ds_area_msr */ +#define TIF_BTS_TRACE_TS 27 /* record scheduling event timestamps */ +#define TIF_NOTSC 28 /* TSC is not accessible in userland */ + +#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) +#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) +#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) +#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) +#define _TIF_IRET (1 << TIF_IRET) +#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) +#define _TIF_SECCOMP (1 << TIF_SECCOMP) +#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) +#define _TIF_MCE_NOTIFY (1 << TIF_MCE_NOTIFY) +#define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED) +#define _TIF_IA32 (1 << TIF_IA32) +#define _TIF_FORK (1 << TIF_FORK) +#define _TIF_ABI_PENDING (1 << TIF_ABI_PENDING) +#define _TIF_DEBUG (1 << TIF_DEBUG) +#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) +#define _TIF_FREEZE (1 << TIF_FREEZE) +#define _TIF_FORCED_TF (1 << TIF_FORCED_TF) +#define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR) +#define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR) +#define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS) +#define _TIF_NOTSC (1 << TIF_NOTSC) + +/* work to do on interrupt/exception return */ +#define _TIF_WORK_MASK \ + (0x0000FFFF & \ + ~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP|_TIF_SECCOMP)) +/* work to do on any return to user space */ +#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP) + +#define _TIF_DO_NOTIFY_MASK \ + (_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY|_TIF_HRTICK_RESCHED) + +/* flags to check in __switch_to() */ +#define _TIF_WORK_CTXSW \ + (_TIF_IO_BITMAP|_TIF_DEBUGCTLMSR|_TIF_DS_AREA_MSR|_TIF_BTS_TRACE_TS|_TIF_NOTSC) +#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW +#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG) + +#define PREEMPT_ACTIVE 0x10000000 + +/* + * Thread-synchronous status. + * + * This is different from the flags in that nobody else + * ever touches our thread-synchronous status, so we don't + * have to worry about atomic accesses. + */ +#define TS_USEDFPU 0x0001 /* FPU was used by this task + this quantum (SMP) */ +#define TS_COMPAT 0x0002 /* 32bit syscall active */ +#define TS_POLLING 0x0004 /* true if in idle loop + and not sleeping */ + +#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) + +#endif /* !X86_32 */ + + #ifndef __ASSEMBLY__ extern void arch_task_cache_init(void); extern void free_thread_info(struct thread_info *ti); diff --git a/include/asm-x86/thread_info_32.h b/include/asm-x86/thread_info_32.h deleted file mode 100644 index 531859962096..000000000000 --- a/include/asm-x86/thread_info_32.h +++ /dev/null @@ -1,196 +0,0 @@ -/* thread_info.h: i386 low-level thread information - * - * Copyright (C) 2002 David Howells (dhowells@redhat.com) - * - Incorporating suggestions made by Linus Torvalds and Dave Miller - */ - -#ifndef _ASM_THREAD_INFO_H -#define _ASM_THREAD_INFO_H - -#ifdef __KERNEL__ - -#include -#include - -#ifndef __ASSEMBLY__ -#include -#endif - -/* - * low level task data that entry.S needs immediate access to - * - this struct should fit entirely inside of one cache line - * - this struct shares the supervisor stack pages - * - if the contents of this structure are changed, - * the assembly constants must also be changed - */ -#ifndef __ASSEMBLY__ - -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - unsigned long flags; /* low level flags */ - unsigned long status; /* thread-synchronous flags */ - __u32 cpu; /* current CPU */ - int preempt_count; /* 0 => preemptable, - <0 => BUG */ - mm_segment_t addr_limit; /* thread address space: - 0-0xBFFFFFFF user-thread - 0-0xFFFFFFFF kernel-thread - */ - void *sysenter_return; - struct restart_block restart_block; - unsigned long previous_esp; /* ESP of the previous stack in - case of nested (IRQ) stacks - */ - __u8 supervisor_stack[0]; -}; - -#else /* !__ASSEMBLY__ */ - -#include - -#endif - -#define PREEMPT_ACTIVE 0x10000000 -#ifdef CONFIG_4KSTACKS -#define THREAD_SIZE (4096) -#else -#define THREAD_SIZE (8192) -#endif - -#define STACK_WARN (THREAD_SIZE/8) -/* - * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. - */ -#ifndef __ASSEMBLY__ - -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = 1, \ - .addr_limit = KERNEL_DS, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - - -/* how to get the current stack pointer from C */ -register unsigned long current_stack_pointer asm("esp") __used; - -/* how to get the thread information struct from C */ -static inline struct thread_info *current_thread_info(void) -{ - return (struct thread_info *) - (current_stack_pointer & ~(THREAD_SIZE - 1)); -} - -/* thread information allocation */ -#ifdef CONFIG_DEBUG_STACK_USAGE -#define alloc_thread_info(tsk) ((struct thread_info *) \ - __get_free_pages(GFP_KERNEL | __GFP_ZERO, get_order(THREAD_SIZE))) -#else -#define alloc_thread_info(tsk) ((struct thread_info *) \ - __get_free_pages(GFP_KERNEL, get_order(THREAD_SIZE))) -#endif - -#else /* !__ASSEMBLY__ */ - -/* how to get the thread information struct from ASM */ -#define GET_THREAD_INFO(reg) \ - movl $-THREAD_SIZE, reg; \ - andl %esp, reg - -/* use this one if reg already contains %esp */ -#define GET_THREAD_INFO_WITH_ESP(reg) \ - andl $-THREAD_SIZE, reg - -#endif - -/* - * thread information flags - * - these are process state flags that various - * assembly files may need to access - * - pending work-to-be-done flags are in LSW - * - other flags in MSW - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 1 /* signal pending */ -#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ -#define TIF_SINGLESTEP 3 /* restore singlestep on return to - user mode */ -#define TIF_IRET 4 /* return with iret */ -#define TIF_SYSCALL_EMU 5 /* syscall emulation active */ -#define TIF_SYSCALL_AUDIT 6 /* syscall auditing active */ -#define TIF_SECCOMP 7 /* secure computing */ -#define TIF_RESTORE_SIGMASK 8 /* restore signal mask in do_signal() */ -#define TIF_HRTICK_RESCHED 9 /* reprogram hrtick timer */ -#define TIF_MEMDIE 16 -#define TIF_DEBUG 17 /* uses debug registers */ -#define TIF_IO_BITMAP 18 /* uses I/O bitmap */ -#define TIF_FREEZE 19 /* is freezing for suspend */ -#define TIF_NOTSC 20 /* TSC is not accessible in userland */ -#define TIF_FORCED_TF 21 /* true if TF in eflags artificially */ -#define TIF_DEBUGCTLMSR 22 /* uses thread_struct.debugctlmsr */ -#define TIF_DS_AREA_MSR 23 /* uses thread_struct.ds_area_msr */ -#define TIF_BTS_TRACE_TS 24 /* record scheduling event timestamps */ - -#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) -#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) -#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) -#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) -#define _TIF_IRET (1 << TIF_IRET) -#define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU) -#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) -#define _TIF_SECCOMP (1 << TIF_SECCOMP) -#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) -#define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED) -#define _TIF_DEBUG (1 << TIF_DEBUG) -#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) -#define _TIF_FREEZE (1 << TIF_FREEZE) -#define _TIF_NOTSC (1 << TIF_NOTSC) -#define _TIF_FORCED_TF (1 << TIF_FORCED_TF) -#define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR) -#define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR) -#define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS) - -/* work to do on interrupt/exception return */ -#define _TIF_WORK_MASK \ - (0x0000FFFF & ~(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ - _TIF_SECCOMP | _TIF_SYSCALL_EMU)) -/* work to do on any return to u-space */ -#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP) - -/* flags to check in __switch_to() */ -#define _TIF_WORK_CTXSW \ - (_TIF_IO_BITMAP | _TIF_NOTSC | _TIF_DEBUGCTLMSR | \ - _TIF_DS_AREA_MSR | _TIF_BTS_TRACE_TS) -#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW -#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW | _TIF_DEBUG) - - -/* - * Thread-synchronous status. - * - * This is different from the flags in that nobody else - * ever touches our thread-synchronous status, so we don't - * have to worry about atomic accesses. - */ -#define TS_USEDFPU 0x0001 /* FPU was used by this task - this quantum (SMP) */ -#define TS_POLLING 0x0002 /* True if in idle loop - and not sleeping */ - -#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) - -#endif /* __KERNEL__ */ - -#endif /* _ASM_THREAD_INFO_H */ diff --git a/include/asm-x86/thread_info_64.h b/include/asm-x86/thread_info_64.h deleted file mode 100644 index ed664e874dec..000000000000 --- a/include/asm-x86/thread_info_64.h +++ /dev/null @@ -1,186 +0,0 @@ -/* thread_info.h: x86_64 low-level thread information - * - * Copyright (C) 2002 David Howells (dhowells@redhat.com) - * - Incorporating suggestions made by Linus Torvalds and Dave Miller - */ - -#ifndef _ASM_THREAD_INFO_H -#define _ASM_THREAD_INFO_H - -#ifdef __KERNEL__ - -#include -#include -#include - -/* - * low level task data that entry.S needs immediate access to - * - this struct should fit entirely inside of one cache line - * - this struct shares the supervisor stack pages - */ -#ifndef __ASSEMBLY__ -struct task_struct; -struct exec_domain; -#include - -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - __u32 flags; /* low level flags */ - __u32 status; /* thread synchronous flags */ - __u32 cpu; /* current CPU */ - int preempt_count; /* 0 => preemptable, - <0 => BUG */ - mm_segment_t addr_limit; - struct restart_block restart_block; -#ifdef CONFIG_IA32_EMULATION - void __user *sysenter_return; -#endif -}; -#endif - -/* - * macros/functions for gaining access to the thread information structure - * preempt_count needs to be 1 initially, until the scheduler is functional. - */ -#ifndef __ASSEMBLY__ -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = 1, \ - .addr_limit = KERNEL_DS, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - -static inline struct thread_info *current_thread_info(void) -{ - struct thread_info *ti; - ti = (void *)(read_pda(kernelstack) + PDA_STACKOFFSET - THREAD_SIZE); - return ti; -} - -/* do not use in interrupt context */ -static inline struct thread_info *stack_thread_info(void) -{ - struct thread_info *ti; - asm("andq %%rsp,%0; " : "=r" (ti) : "0" (~(THREAD_SIZE - 1))); - return ti; -} - -/* thread information allocation */ -#ifdef CONFIG_DEBUG_STACK_USAGE -#define THREAD_FLAGS (GFP_KERNEL | __GFP_ZERO) -#else -#define THREAD_FLAGS GFP_KERNEL -#endif - -#define alloc_thread_info(tsk) \ - ((struct thread_info *)__get_free_pages(THREAD_FLAGS, THREAD_ORDER)) - -#else /* !__ASSEMBLY__ */ - -/* how to get the thread information struct from ASM */ -#define GET_THREAD_INFO(reg) \ - movq %gs:pda_kernelstack,reg ; \ - subq $(THREAD_SIZE-PDA_STACKOFFSET),reg - -#endif - -/* - * thread information flags - * - these are process state flags that various assembly files - * may need to access - * - pending work-to-be-done flags are in LSW - * - other flags in MSW - * Warning: layout of LSW is hardcoded in entry.S - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 2 /* signal pending */ -#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ -#define TIF_SINGLESTEP 4 /* reenable singlestep on user return*/ -#define TIF_IRET 5 /* force IRET */ -#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ -#define TIF_SECCOMP 8 /* secure computing */ -#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal */ -#define TIF_MCE_NOTIFY 10 /* notify userspace of an MCE */ -#define TIF_HRTICK_RESCHED 11 /* reprogram hrtick timer */ -/* 16 free */ -#define TIF_IA32 17 /* 32bit process */ -#define TIF_FORK 18 /* ret_from_fork */ -#define TIF_ABI_PENDING 19 -#define TIF_MEMDIE 20 -#define TIF_DEBUG 21 /* uses debug registers */ -#define TIF_IO_BITMAP 22 /* uses I/O bitmap */ -#define TIF_FREEZE 23 /* is freezing for suspend */ -#define TIF_FORCED_TF 24 /* true if TF in eflags artificially */ -#define TIF_DEBUGCTLMSR 25 /* uses thread_struct.debugctlmsr */ -#define TIF_DS_AREA_MSR 26 /* uses thread_struct.ds_area_msr */ -#define TIF_BTS_TRACE_TS 27 /* record scheduling event timestamps */ -#define TIF_NOTSC 28 /* TSC is not accessible in userland */ - -#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) -#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) -#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) -#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) -#define _TIF_IRET (1 << TIF_IRET) -#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) -#define _TIF_SECCOMP (1 << TIF_SECCOMP) -#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) -#define _TIF_MCE_NOTIFY (1 << TIF_MCE_NOTIFY) -#define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED) -#define _TIF_IA32 (1 << TIF_IA32) -#define _TIF_FORK (1 << TIF_FORK) -#define _TIF_ABI_PENDING (1 << TIF_ABI_PENDING) -#define _TIF_DEBUG (1 << TIF_DEBUG) -#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) -#define _TIF_FREEZE (1 << TIF_FREEZE) -#define _TIF_FORCED_TF (1 << TIF_FORCED_TF) -#define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR) -#define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR) -#define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS) -#define _TIF_NOTSC (1 << TIF_NOTSC) - -/* work to do on interrupt/exception return */ -#define _TIF_WORK_MASK \ - (0x0000FFFF & \ - ~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP|_TIF_SECCOMP)) -/* work to do on any return to user space */ -#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP) - -#define _TIF_DO_NOTIFY_MASK \ - (_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY|_TIF_HRTICK_RESCHED) - -/* flags to check in __switch_to() */ -#define _TIF_WORK_CTXSW \ - (_TIF_IO_BITMAP|_TIF_DEBUGCTLMSR|_TIF_DS_AREA_MSR|_TIF_BTS_TRACE_TS|_TIF_NOTSC) -#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW -#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG) - -#define PREEMPT_ACTIVE 0x10000000 - -/* - * Thread-synchronous status. - * - * This is different from the flags in that nobody else - * ever touches our thread-synchronous status, so we don't - * have to worry about atomic accesses. - */ -#define TS_USEDFPU 0x0001 /* FPU was used by this task - this quantum (SMP) */ -#define TS_COMPAT 0x0002 /* 32bit syscall active */ -#define TS_POLLING 0x0004 /* true if in idle loop - and not sleeping */ - -#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) - -#endif /* __KERNEL__ */ - -#endif /* _ASM_THREAD_INFO_H */ From 12a638e13c68bbe187782518dab375f4fa800fc4 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Mon, 28 Apr 2008 18:52:33 -0700 Subject: [PATCH 007/821] x86: threadinfo: common include files Move shared includes to a common area in thread_info.h Adds asm/types.h for x86_64 and linux/compiler.h for x86_32. Not needed but we can avoid some ifdeffing and it simplifies later joining. Signed-off-by: Christoph Lameter Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/thread_info.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index d59384ac0ba6..d2dc1a3b5d65 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -7,9 +7,11 @@ #ifndef _ASM_X86_THREAD_INFO_H #define _ASM_X86_THREAD_INFO_H -#ifdef CONFIG_X86_32 #include #include +#include + +#ifdef CONFIG_X86_32 #ifndef __ASSEMBLY__ #include @@ -192,8 +194,6 @@ static inline struct thread_info *current_thread_info(void) #else /* X86_32 */ -#include -#include #include /* From f2ea3b1d4d7ab66d86da57899993282f3deb1f74 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Mon, 28 Apr 2008 18:52:34 -0700 Subject: [PATCH 008/821] x86: threadinfo: merge thread sync state definitions Merge both. x86_64 has an additional TS_COMPAT that is harmless for 32 bit. Signed-off-by: Christoph Lameter Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/thread_info.h | 22 +++------------------- 1 file changed, 3 insertions(+), 19 deletions(-) diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index d2dc1a3b5d65..4b91f59de8fc 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -177,21 +177,6 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW #define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW | _TIF_DEBUG) - -/* - * Thread-synchronous status. - * - * This is different from the flags in that nobody else - * ever touches our thread-synchronous status, so we don't - * have to worry about atomic accesses. - */ -#define TS_USEDFPU 0x0001 /* FPU was used by this task - this quantum (SMP) */ -#define TS_POLLING 0x0002 /* True if in idle loop - and not sleeping */ - -#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) - #else /* X86_32 */ #include @@ -349,6 +334,8 @@ static inline struct thread_info *stack_thread_info(void) #define PREEMPT_ACTIVE 0x10000000 +#endif /* !X86_32 */ + /* * Thread-synchronous status. * @@ -358,15 +345,12 @@ static inline struct thread_info *stack_thread_info(void) */ #define TS_USEDFPU 0x0001 /* FPU was used by this task this quantum (SMP) */ -#define TS_COMPAT 0x0002 /* 32bit syscall active */ +#define TS_COMPAT 0x0002 /* 32bit syscall active (64BIT)*/ #define TS_POLLING 0x0004 /* true if in idle loop and not sleeping */ #define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) -#endif /* !X86_32 */ - - #ifndef __ASSEMBLY__ extern void arch_task_cache_init(void); extern void free_thread_info(struct thread_info *ti); From 006c484bb3d9547e82a33a09668c9b54b912c8fb Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Mon, 28 Apr 2008 18:52:35 -0700 Subject: [PATCH 009/821] x86: common thread_info definitions Merge the thread_info definition into one structure definition for both arches. The __u32 is equal to unsigned long for 32 bit. sysenter_return is used both for the IA32 emulation for 64 and x86_32. Avoid complicated #ifdef by simply always including it. Signed-off-by: Christoph Lameter Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/thread_info.h | 55 ++++++++--------------------------- 1 file changed, 12 insertions(+), 43 deletions(-) diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index 4b91f59de8fc..71b0880d80b5 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -11,47 +11,42 @@ #include #include -#ifdef CONFIG_X86_32 - -#ifndef __ASSEMBLY__ -#include -#endif - /* * low level task data that entry.S needs immediate access to * - this struct should fit entirely inside of one cache line * - this struct shares the supervisor stack pages - * - if the contents of this structure are changed, - * the assembly constants must also be changed */ #ifndef __ASSEMBLY__ +struct task_struct; +struct exec_domain; +#include struct thread_info { struct task_struct *task; /* main task structure */ struct exec_domain *exec_domain; /* execution domain */ - unsigned long flags; /* low level flags */ - unsigned long status; /* thread-synchronous flags */ + __u32 flags; /* low level flags */ + __u32 status; /* thread synchronous flags */ __u32 cpu; /* current CPU */ - int preempt_count; /* 0 => preemptable, + int preempt_count; /* 0 => preemptable, <0 => BUG */ - mm_segment_t addr_limit; /* thread address space: - 0-0xBFFFFFFF user-thread - 0-0xFFFFFFFF kernel-thread - */ - void *sysenter_return; + mm_segment_t addr_limit; struct restart_block restart_block; + void __user *sysenter_return; +#ifdef CONFIG_X86_32 unsigned long previous_esp; /* ESP of the previous stack in case of nested (IRQ) stacks */ __u8 supervisor_stack[0]; +#endif }; - #else /* !__ASSEMBLY__ */ #include #endif +#ifdef CONFIG_X86_32 + #define PREEMPT_ACTIVE 0x10000000 #ifdef CONFIG_4KSTACKS #define THREAD_SIZE (4096) @@ -181,32 +176,6 @@ static inline struct thread_info *current_thread_info(void) #include -/* - * low level task data that entry.S needs immediate access to - * - this struct should fit entirely inside of one cache line - * - this struct shares the supervisor stack pages - */ -#ifndef __ASSEMBLY__ -struct task_struct; -struct exec_domain; -#include - -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - __u32 flags; /* low level flags */ - __u32 status; /* thread synchronous flags */ - __u32 cpu; /* current CPU */ - int preempt_count; /* 0 => preemptable, - <0 => BUG */ - mm_segment_t addr_limit; - struct restart_block restart_block; -#ifdef CONFIG_IA32_EMULATION - void __user *sysenter_return; -#endif -}; -#endif - /* * macros/functions for gaining access to the thread information structure * preempt_count needs to be 1 initially, until the scheduler is functional. From 3351cc03c0762353225a79507e38db4c1e656d52 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Mon, 28 Apr 2008 18:52:36 -0700 Subject: [PATCH 010/821] x86: threadinfo: merge INIT_THREAD_INFO Both definitions are the same. So move to common x86 area. Signed-off-by: Christoph Lameter Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/thread_info.h | 49 ++++++++++++----------------------- 1 file changed, 17 insertions(+), 32 deletions(-) diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index 71b0880d80b5..8cd52d4bfb0e 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -39,6 +39,23 @@ struct thread_info { __u8 supervisor_stack[0]; #endif }; + +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + #else /* !__ASSEMBLY__ */ #include @@ -62,22 +79,6 @@ struct thread_info { */ #ifndef __ASSEMBLY__ -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = 1, \ - .addr_limit = KERNEL_DS, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - /* how to get the current stack pointer from C */ register unsigned long current_stack_pointer asm("esp") __used; @@ -181,22 +182,6 @@ static inline struct thread_info *current_thread_info(void) * preempt_count needs to be 1 initially, until the scheduler is functional. */ #ifndef __ASSEMBLY__ -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = 1, \ - .addr_limit = KERNEL_DS, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - static inline struct thread_info *current_thread_info(void) { struct thread_info *ti; From 24e2de6e28a453cd114b06215df2f9931cd0c342 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Mon, 28 Apr 2008 18:52:37 -0700 Subject: [PATCH 011/821] x86: thread_info: PREEMPT_ACTIVE Same for both 32 and 64 bit so simply put it in to the common area. Signed-off-by: Christoph Lameter Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/thread_info.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index 8cd52d4bfb0e..f8d5cf516ac4 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -62,9 +62,10 @@ struct thread_info { #endif +#define PREEMPT_ACTIVE 0x10000000 + #ifdef CONFIG_X86_32 -#define PREEMPT_ACTIVE 0x10000000 #ifdef CONFIG_4KSTACKS #define THREAD_SIZE (4096) #else @@ -286,8 +287,6 @@ static inline struct thread_info *stack_thread_info(void) #define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW #define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG) -#define PREEMPT_ACTIVE 0x10000000 - #endif /* !X86_32 */ /* From e57549b017552f7a493b366f5ccd4781801083e4 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Mon, 28 Apr 2008 18:52:38 -0700 Subject: [PATCH 012/821] x86: thread_info: merge TIF_ flags. Both TIF lists are essentially the same. x86_32 also has TIF_SYSCALL_EMU which must be undefined for the 64 bit case. Signed-off-by: Christoph Lameter Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/thread_info.h | 162 +++++++++++++--------------------- 1 file changed, 61 insertions(+), 101 deletions(-) diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index f8d5cf516ac4..983743a14b99 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -62,6 +62,67 @@ struct thread_info { #endif +/* + * thread information flags + * - these are process state flags that various assembly files + * may need to access + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + * Warning: layout of LSW is hardcoded in entry.S + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 2 /* signal pending */ +#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ +#define TIF_SINGLESTEP 4 /* reenable singlestep on user return*/ +#define TIF_IRET 5 /* force IRET */ +#ifdef CONFIG_X86_32 +#define TIF_SYSCALL_EMU 6 /* syscall emulation active */ +#endif +#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ +#define TIF_SECCOMP 8 /* secure computing */ +#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal */ +#define TIF_MCE_NOTIFY 10 /* notify userspace of an MCE */ +#define TIF_HRTICK_RESCHED 11 /* reprogram hrtick timer */ +#define TIF_NOTSC 16 /* TSC is not accessible in userland */ +#define TIF_IA32 17 /* 32bit process */ +#define TIF_FORK 18 /* ret_from_fork */ +#define TIF_ABI_PENDING 19 +#define TIF_MEMDIE 20 +#define TIF_DEBUG 21 /* uses debug registers */ +#define TIF_IO_BITMAP 22 /* uses I/O bitmap */ +#define TIF_FREEZE 23 /* is freezing for suspend */ +#define TIF_FORCED_TF 24 /* true if TF in eflags artificially */ +#define TIF_DEBUGCTLMSR 25 /* uses thread_struct.debugctlmsr */ +#define TIF_DS_AREA_MSR 26 /* uses thread_struct.ds_area_msr */ +#define TIF_BTS_TRACE_TS 27 /* record scheduling event timestamps */ + +#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) +#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) +#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) +#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) +#define _TIF_IRET (1 << TIF_IRET) +#ifdef CONFIG_X86_32 +#define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU) +#else +#define _TIF_SYSCALL_EMU 0 +#endif +#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) +#define _TIF_SECCOMP (1 << TIF_SECCOMP) +#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) +#define _TIF_MCE_NOTIFY (1 << TIF_MCE_NOTIFY) +#define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED) +#define _TIF_NOTSC (1 << TIF_NOTSC) +#define _TIF_IA32 (1 << TIF_IA32) +#define _TIF_FORK (1 << TIF_FORK) +#define _TIF_ABI_PENDING (1 << TIF_ABI_PENDING) +#define _TIF_DEBUG (1 << TIF_DEBUG) +#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) +#define _TIF_FREEZE (1 << TIF_FREEZE) +#define _TIF_FORCED_TF (1 << TIF_FORCED_TF) +#define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR) +#define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR) +#define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS) + #define PREEMPT_ACTIVE 0x10000000 #ifdef CONFIG_X86_32 @@ -113,53 +174,6 @@ static inline struct thread_info *current_thread_info(void) #endif -/* - * thread information flags - * - these are process state flags that various - * assembly files may need to access - * - pending work-to-be-done flags are in LSW - * - other flags in MSW - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 1 /* signal pending */ -#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ -#define TIF_SINGLESTEP 3 /* restore singlestep on return to - user mode */ -#define TIF_IRET 4 /* return with iret */ -#define TIF_SYSCALL_EMU 5 /* syscall emulation active */ -#define TIF_SYSCALL_AUDIT 6 /* syscall auditing active */ -#define TIF_SECCOMP 7 /* secure computing */ -#define TIF_RESTORE_SIGMASK 8 /* restore signal mask in do_signal() */ -#define TIF_HRTICK_RESCHED 9 /* reprogram hrtick timer */ -#define TIF_MEMDIE 16 -#define TIF_DEBUG 17 /* uses debug registers */ -#define TIF_IO_BITMAP 18 /* uses I/O bitmap */ -#define TIF_FREEZE 19 /* is freezing for suspend */ -#define TIF_NOTSC 20 /* TSC is not accessible in userland */ -#define TIF_FORCED_TF 21 /* true if TF in eflags artificially */ -#define TIF_DEBUGCTLMSR 22 /* uses thread_struct.debugctlmsr */ -#define TIF_DS_AREA_MSR 23 /* uses thread_struct.ds_area_msr */ -#define TIF_BTS_TRACE_TS 24 /* record scheduling event timestamps */ - -#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) -#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) -#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) -#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) -#define _TIF_IRET (1 << TIF_IRET) -#define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU) -#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) -#define _TIF_SECCOMP (1 << TIF_SECCOMP) -#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) -#define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED) -#define _TIF_DEBUG (1 << TIF_DEBUG) -#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) -#define _TIF_FREEZE (1 << TIF_FREEZE) -#define _TIF_NOTSC (1 << TIF_NOTSC) -#define _TIF_FORCED_TF (1 << TIF_FORCED_TF) -#define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR) -#define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR) -#define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS) - /* work to do on interrupt/exception return */ #define _TIF_WORK_MASK \ (0x0000FFFF & ~(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ @@ -217,60 +231,6 @@ static inline struct thread_info *stack_thread_info(void) #endif -/* - * thread information flags - * - these are process state flags that various assembly files - * may need to access - * - pending work-to-be-done flags are in LSW - * - other flags in MSW - * Warning: layout of LSW is hardcoded in entry.S - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 2 /* signal pending */ -#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ -#define TIF_SINGLESTEP 4 /* reenable singlestep on user return*/ -#define TIF_IRET 5 /* force IRET */ -#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ -#define TIF_SECCOMP 8 /* secure computing */ -#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal */ -#define TIF_MCE_NOTIFY 10 /* notify userspace of an MCE */ -#define TIF_HRTICK_RESCHED 11 /* reprogram hrtick timer */ -/* 16 free */ -#define TIF_IA32 17 /* 32bit process */ -#define TIF_FORK 18 /* ret_from_fork */ -#define TIF_ABI_PENDING 19 -#define TIF_MEMDIE 20 -#define TIF_DEBUG 21 /* uses debug registers */ -#define TIF_IO_BITMAP 22 /* uses I/O bitmap */ -#define TIF_FREEZE 23 /* is freezing for suspend */ -#define TIF_FORCED_TF 24 /* true if TF in eflags artificially */ -#define TIF_DEBUGCTLMSR 25 /* uses thread_struct.debugctlmsr */ -#define TIF_DS_AREA_MSR 26 /* uses thread_struct.ds_area_msr */ -#define TIF_BTS_TRACE_TS 27 /* record scheduling event timestamps */ -#define TIF_NOTSC 28 /* TSC is not accessible in userland */ - -#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) -#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) -#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) -#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) -#define _TIF_IRET (1 << TIF_IRET) -#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) -#define _TIF_SECCOMP (1 << TIF_SECCOMP) -#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) -#define _TIF_MCE_NOTIFY (1 << TIF_MCE_NOTIFY) -#define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED) -#define _TIF_IA32 (1 << TIF_IA32) -#define _TIF_FORK (1 << TIF_FORK) -#define _TIF_ABI_PENDING (1 << TIF_ABI_PENDING) -#define _TIF_DEBUG (1 << TIF_DEBUG) -#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) -#define _TIF_FREEZE (1 << TIF_FREEZE) -#define _TIF_FORCED_TF (1 << TIF_FORCED_TF) -#define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR) -#define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR) -#define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS) -#define _TIF_NOTSC (1 << TIF_NOTSC) - /* work to do on interrupt/exception return */ #define _TIF_WORK_MASK \ (0x0000FFFF & \ From 00c1bb133cf351fa3904b00a48a9cf535d018de6 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Mon, 28 Apr 2008 18:52:39 -0700 Subject: [PATCH 013/821] x86: thread_info: merge tif masks The TIF masks are basically the same. x86_32 also has _TIF_SYSCALL_EMU which is zero for the 64 bit case. The tif masks become the same. x86_64 has an additional _TIF_DONOTIFY_MASK. Does not hurt for the 32 bit case since it is only used in x86_64 arch code. Signed-off-by: Christoph Lameter Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/thread_info.h | 51 +++++++++++++++-------------------- 1 file changed, 21 insertions(+), 30 deletions(-) diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index 983743a14b99..b7cd41308e56 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -123,6 +123,27 @@ struct thread_info { #define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR) #define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS) +/* work to do on interrupt/exception return */ +#define _TIF_WORK_MASK \ + (0x0000FFFF & \ + ~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP| \ + _TIF_SECCOMP|_TIF_SYSCALL_EMU)) + +/* work to do on any return to user space */ +#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP) + +#define _TIF_DO_NOTIFY_MASK \ + (_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY|_TIF_HRTICK_RESCHED) + +/* flags to check in __switch_to() */ +#define _TIF_WORK_CTXSW \ + (_TIF_IO_BITMAP|_TIF_DEBUGCTLMSR|_TIF_DS_AREA_MSR|_TIF_BTS_TRACE_TS| \ + _TIF_NOTSC) + +#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW +#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG) + + #define PREEMPT_ACTIVE 0x10000000 #ifdef CONFIG_X86_32 @@ -174,20 +195,6 @@ static inline struct thread_info *current_thread_info(void) #endif -/* work to do on interrupt/exception return */ -#define _TIF_WORK_MASK \ - (0x0000FFFF & ~(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ - _TIF_SECCOMP | _TIF_SYSCALL_EMU)) -/* work to do on any return to u-space */ -#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP) - -/* flags to check in __switch_to() */ -#define _TIF_WORK_CTXSW \ - (_TIF_IO_BITMAP | _TIF_NOTSC | _TIF_DEBUGCTLMSR | \ - _TIF_DS_AREA_MSR | _TIF_BTS_TRACE_TS) -#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW -#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW | _TIF_DEBUG) - #else /* X86_32 */ #include @@ -231,22 +238,6 @@ static inline struct thread_info *stack_thread_info(void) #endif -/* work to do on interrupt/exception return */ -#define _TIF_WORK_MASK \ - (0x0000FFFF & \ - ~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP|_TIF_SECCOMP)) -/* work to do on any return to user space */ -#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP) - -#define _TIF_DO_NOTIFY_MASK \ - (_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY|_TIF_HRTICK_RESCHED) - -/* flags to check in __switch_to() */ -#define _TIF_WORK_CTXSW \ - (_TIF_IO_BITMAP|_TIF_DEBUGCTLMSR|_TIF_DS_AREA_MSR|_TIF_BTS_TRACE_TS|_TIF_NOTSC) -#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW -#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG) - #endif /* !X86_32 */ /* From b84200b3a0fafa167185201319940d8df62a8c7b Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Mon, 28 Apr 2008 18:52:40 -0700 Subject: [PATCH 014/821] x86: thread_info: merge thread_info allocation Make them similar so that both use THREAD_ORDER and THREAD_FLAGS and have a THREAD_SIZE definition that is setup in asm/page_xx.h Signed-off-by: Christoph Lameter Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/page_32.h | 8 +++++++ include/asm-x86/thread_info.h | 39 +++++++++++------------------------ 2 files changed, 20 insertions(+), 27 deletions(-) diff --git a/include/asm-x86/page_32.h b/include/asm-x86/page_32.h index 424e82f8ae27..50b33ebcf851 100644 --- a/include/asm-x86/page_32.h +++ b/include/asm-x86/page_32.h @@ -13,6 +13,14 @@ */ #define __PAGE_OFFSET _AC(CONFIG_PAGE_OFFSET, UL) +#ifdef CONFIG_4KSTACKS +#define THREAD_ORDER 0 +#else +#define THREAD_ORDER 1 +#endif +#define THREAD_SIZE (PAGE_SIZE << THREAD_ORDER) + + #ifdef CONFIG_X86_PAE #define __PHYSICAL_MASK_SHIFT 36 #define __VIRTUAL_MASK_SHIFT 32 diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index b7cd41308e56..348f0e0faa3b 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -132,6 +132,7 @@ struct thread_info { /* work to do on any return to user space */ #define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP) +/* Only used for 64 bit */ #define _TIF_DO_NOTIFY_MASK \ (_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY|_TIF_HRTICK_RESCHED) @@ -143,18 +144,21 @@ struct thread_info { #define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW #define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG) - #define PREEMPT_ACTIVE 0x10000000 +/* thread information allocation */ +#ifdef CONFIG_DEBUG_STACK_USAGE +#define THREAD_FLAGS (GFP_KERNEL | __GFP_ZERO) +#else +#define THREAD_FLAGS GFP_KERNEL +#endif + +#define alloc_thread_info(tsk) \ + ((struct thread_info *)__get_free_pages(THREAD_FLAGS, THREAD_ORDER)) + #ifdef CONFIG_X86_32 -#ifdef CONFIG_4KSTACKS -#define THREAD_SIZE (4096) -#else -#define THREAD_SIZE (8192) -#endif - -#define STACK_WARN (THREAD_SIZE/8) +#define STACK_WARN (THREAD_SIZE/8) /* * macros/functions for gaining access to the thread information structure * @@ -173,15 +177,6 @@ static inline struct thread_info *current_thread_info(void) (current_stack_pointer & ~(THREAD_SIZE - 1)); } -/* thread information allocation */ -#ifdef CONFIG_DEBUG_STACK_USAGE -#define alloc_thread_info(tsk) ((struct thread_info *) \ - __get_free_pages(GFP_KERNEL | __GFP_ZERO, get_order(THREAD_SIZE))) -#else -#define alloc_thread_info(tsk) ((struct thread_info *) \ - __get_free_pages(GFP_KERNEL, get_order(THREAD_SIZE))) -#endif - #else /* !__ASSEMBLY__ */ /* how to get the thread information struct from ASM */ @@ -219,16 +214,6 @@ static inline struct thread_info *stack_thread_info(void) return ti; } -/* thread information allocation */ -#ifdef CONFIG_DEBUG_STACK_USAGE -#define THREAD_FLAGS (GFP_KERNEL | __GFP_ZERO) -#else -#define THREAD_FLAGS GFP_KERNEL -#endif - -#define alloc_thread_info(tsk) \ - ((struct thread_info *)__get_free_pages(THREAD_FLAGS, THREAD_ORDER)) - #else /* !__ASSEMBLY__ */ /* how to get the thread information struct from ASM */ From 8a6c160a2a13d82c75a50af7282b906cce948df5 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 30 Apr 2008 22:13:44 +0200 Subject: [PATCH 015/821] x86: redo thread_info.h change redo Roland's "signals: x86 TS_RESTORE_SIGMASK" ontop of the unified thread_info.h file. Signed-off-by: Ingo Molnar --- include/asm-x86/thread_info.h | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index 348f0e0faa3b..74481b72ae0f 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -80,7 +80,6 @@ struct thread_info { #endif #define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ #define TIF_SECCOMP 8 /* secure computing */ -#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal */ #define TIF_MCE_NOTIFY 10 /* notify userspace of an MCE */ #define TIF_HRTICK_RESCHED 11 /* reprogram hrtick timer */ #define TIF_NOTSC 16 /* TSC is not accessible in userland */ @@ -108,7 +107,6 @@ struct thread_info { #endif #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) -#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) #define _TIF_MCE_NOTIFY (1 << TIF_MCE_NOTIFY) #define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED) #define _TIF_NOTSC (1 << TIF_NOTSC) @@ -237,9 +235,20 @@ static inline struct thread_info *stack_thread_info(void) #define TS_COMPAT 0x0002 /* 32bit syscall active (64BIT)*/ #define TS_POLLING 0x0004 /* true if in idle loop and not sleeping */ +#define TS_RESTORE_SIGMASK 0x0008 /* restore signal mask in do_signal() */ #define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) +#ifndef __ASSEMBLY__ +#define HAVE_SET_RESTORE_SIGMASK 1 +static inline void set_restore_sigmask(void) +{ + struct thread_info *ti = current_thread_info(); + ti->status |= TS_RESTORE_SIGMASK; + set_bit(TIF_SIGPENDING, &ti->flags); +} +#endif /* !__ASSEMBLY__ */ + #ifndef __ASSEMBLY__ extern void arch_task_cache_init(void); extern void free_thread_info(struct thread_info *ti); From 41b3eae669fb1ef6ae4acaa937b4e4617a1aa078 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 22 Apr 2008 16:29:26 +0100 Subject: [PATCH 016/821] x86: minor polishing to top-level arch Makefile Use build target when creating compatibility link, and use $(boot) where possible. Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar --- arch/x86/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 3cff3c894cf3..5df0d1e330b1 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -210,12 +210,12 @@ all: bzImage # KBUILD_IMAGE specify target image being built KBUILD_IMAGE := $(boot)/bzImage -zImage zlilo zdisk: KBUILD_IMAGE := arch/x86/boot/zImage +zImage zlilo zdisk: KBUILD_IMAGE := $(boot)/zImage zImage bzImage: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE) $(Q)mkdir -p $(objtree)/arch/$(UTS_MACHINE)/boot - $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/bzImage + $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/$@ compressed: zImage From 6859a8402945cf1d74af75a2e1aa4e327a506ab4 Mon Sep 17 00:00:00 2001 From: Alan Mayer Date: Wed, 26 Mar 2008 16:11:31 -0500 Subject: [PATCH 017/821] x86: resize NR_IRQS for large machines On machines with very large numbers of cpus, tables that are dimensioned by NR_IRQS get very large, especially the irq_desc table. They are also very sparsely used. When the cpu count is > MAX_IO_APICS, use MAX_IO_APICS to set NR_IRQS, otherwise use NR_CPUS. Signed-off-by: Alan Mayer Reviewed-by: Christoph Lameter Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/irq_64.h | 6 ++++++ include/linux/kernel_stat.h | 2 +- 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/include/asm-x86/irq_64.h b/include/asm-x86/irq_64.h index 083d35a62c94..7608176590b6 100644 --- a/include/asm-x86/irq_64.h +++ b/include/asm-x86/irq_64.h @@ -10,6 +10,8 @@ * */ +#include + #define TIMER_IRQ 0 /* @@ -31,7 +33,11 @@ #define FIRST_SYSTEM_VECTOR 0xef /* duplicated in hw_irq.h */ +#if NR_CPUS < MAX_IO_APICS #define NR_IRQS (NR_VECTORS + (32 * NR_CPUS)) +#else +#define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS)) +#endif #define NR_IRQ_VECTORS NR_IRQS static inline int irq_canonicalize(int irq) diff --git a/include/linux/kernel_stat.h b/include/linux/kernel_stat.h index e8ffce898bf9..cf9f40a91c9c 100644 --- a/include/linux/kernel_stat.h +++ b/include/linux/kernel_stat.h @@ -1,11 +1,11 @@ #ifndef _LINUX_KERNEL_STAT_H #define _LINUX_KERNEL_STAT_H -#include #include #include #include #include +#include #include /* From 2e0884362d1fe36ef2d673d763d6ce35e2044e66 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 May 2008 19:00:30 +0200 Subject: [PATCH 018/821] x86: move common declarations to hw_irq.h Move the common declarations from hw_irq_32/64 into hw_irq.h Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- include/asm-x86/hw_irq.h | 81 +++++++++++++++++++++++++++++++++++++ include/asm-x86/hw_irq_32.h | 61 ---------------------------- include/asm-x86/hw_irq_64.h | 68 ------------------------------- 3 files changed, 81 insertions(+), 129 deletions(-) diff --git a/include/asm-x86/hw_irq.h b/include/asm-x86/hw_irq.h index bf025399d939..38af08ed43cf 100644 --- a/include/asm-x86/hw_irq.h +++ b/include/asm-x86/hw_irq.h @@ -1,5 +1,86 @@ +#ifndef _ASM_HW_IRQ_H +#define _ASM_HW_IRQ_H + +/* + * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar + * + * moved some of the old arch/i386/kernel/irq.h to here. VY + * + * IRQ/IPI changes taken from work by Thomas Radke + * + * + * hacked by Andi Kleen for x86-64. + * unified by tglx + */ + +#define NMI_VECTOR 0x02 + +#ifndef __ASSEMBLY__ + +#include +#include +#include + +#include +#include +#include + +#define platform_legacy_irq(irq) ((irq) < 16) + +/* Interrupt handlers registered during init_IRQ */ +extern void apic_timer_interrupt(void); +extern void error_interrupt(void); +extern void spurious_interrupt(void); +extern void thermal_interrupt(void); +extern void reschedule_interrupt(void); + +extern void invalidate_interrupt(void); +extern void invalidate_interrupt0(void); +extern void invalidate_interrupt1(void); +extern void invalidate_interrupt2(void); +extern void invalidate_interrupt3(void); +extern void invalidate_interrupt4(void); +extern void invalidate_interrupt5(void); +extern void invalidate_interrupt6(void); +extern void invalidate_interrupt7(void); + +extern void irq_move_cleanup_interrupt(void); +extern void threshold_interrupt(void); + +extern void call_function_interrupt(void); + +/* PIC specific functions */ +extern void disable_8259A_irq(unsigned int irq); +extern void enable_8259A_irq(unsigned int irq); +extern int i8259A_irq_pending(unsigned int irq); +extern void make_8259A_irq(unsigned int irq); +extern void init_8259A(int aeoi); + +/* IOAPIC */ +#define IO_APIC_IRQ(x) (((x) >= 16) || ((1<<(x)) & io_apic_irqs)) +extern unsigned long io_apic_irqs; + +extern void init_VISWS_APIC_irqs(void); +extern void setup_IO_APIC(void); +extern void disable_IO_APIC(void); +extern void print_IO_APIC(void); +extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn); +extern void setup_ioapic_dest(void); + +/* IPI functions */ +extern void send_IPI_self(int vector); +extern void send_IPI(int dest, int vector); + +/* Statistics */ +extern atomic_t irq_err_count; +extern atomic_t irq_mis_count; + +#endif /* !ASSEMBLY_ */ + #ifdef CONFIG_X86_32 # include "hw_irq_32.h" #else # include "hw_irq_64.h" #endif + +#endif diff --git a/include/asm-x86/hw_irq_32.h b/include/asm-x86/hw_irq_32.h index ea88054e03f3..89fca5af5958 100644 --- a/include/asm-x86/hw_irq_32.h +++ b/include/asm-x86/hw_irq_32.h @@ -1,66 +1,5 @@ -#ifndef _ASM_HW_IRQ_H -#define _ASM_HW_IRQ_H - -/* - * linux/include/asm/hw_irq.h - * - * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar - * - * moved some of the old arch/i386/kernel/irq.h to here. VY - * - * IRQ/IPI changes taken from work by Thomas Radke - * - */ - -#include -#include -#include -#include - -#define NMI_VECTOR 0x02 - -/* - * Various low-level irq details needed by irq.c, process.c, - * time.c, io_apic.c and smp.c - * - * Interrupt entry/exit code at both C and assembly level - */ extern void (*const interrupt[NR_IRQS])(void); -#ifdef CONFIG_SMP -void reschedule_interrupt(void); -void invalidate_interrupt(void); -void call_function_interrupt(void); -#endif -#ifdef CONFIG_X86_LOCAL_APIC -void apic_timer_interrupt(void); -void error_interrupt(void); -void spurious_interrupt(void); -void thermal_interrupt(void); -#define platform_legacy_irq(irq) ((irq) < 16) -#endif -void disable_8259A_irq(unsigned int irq); -void enable_8259A_irq(unsigned int irq); -int i8259A_irq_pending(unsigned int irq); -void make_8259A_irq(unsigned int irq); -void init_8259A(int aeoi); -void send_IPI_self(int vector); -void init_VISWS_APIC_irqs(void); -void setup_IO_APIC(void); -void disable_IO_APIC(void); -void print_IO_APIC(void); -int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn); -void send_IPI(int dest, int vector); -void setup_ioapic_dest(void); - -extern unsigned long io_apic_irqs; - -extern atomic_t irq_err_count; -extern atomic_t irq_mis_count; - -#define IO_APIC_IRQ(x) (((x) >= 16) || ((1<<(x)) & io_apic_irqs)) - -#endif /* _ASM_HW_IRQ_H */ diff --git a/include/asm-x86/hw_irq_64.h b/include/asm-x86/hw_irq_64.h index 0062ef390f67..28674576e9fe 100644 --- a/include/asm-x86/hw_irq_64.h +++ b/include/asm-x86/hw_irq_64.h @@ -1,28 +1,3 @@ -#ifndef _ASM_HW_IRQ_H -#define _ASM_HW_IRQ_H - -/* - * linux/include/asm/hw_irq.h - * - * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar - * - * moved some of the old arch/i386/kernel/irq.h to here. VY - * - * IRQ/IPI changes taken from work by Thomas Radke - * - * - * hacked by Andi Kleen for x86-64. - */ - -#ifndef __ASSEMBLY__ -#include -#include -#include -#include -#include -#endif - -#define NMI_VECTOR 0x02 /* * IDT vectors usable for external interrupt sources start * at 0x20: @@ -96,25 +71,6 @@ #ifndef __ASSEMBLY__ -/* Interrupt handlers registered during init_IRQ */ -void apic_timer_interrupt(void); -void spurious_interrupt(void); -void error_interrupt(void); -void reschedule_interrupt(void); -void call_function_interrupt(void); -void irq_move_cleanup_interrupt(void); -void invalidate_interrupt0(void); -void invalidate_interrupt1(void); -void invalidate_interrupt2(void); -void invalidate_interrupt3(void); -void invalidate_interrupt4(void); -void invalidate_interrupt5(void); -void invalidate_interrupt6(void); -void invalidate_interrupt7(void); -void thermal_interrupt(void); -void threshold_interrupt(void); -void i8254_timer_resume(void); - typedef int vector_irq_t[NR_VECTORS]; DECLARE_PER_CPU(vector_irq_t, vector_irq); extern void __setup_vector_irq(int cpu); @@ -127,29 +83,9 @@ extern spinlock_t vector_lock; * Interrupt entry/exit code at both C and assembly level */ -extern void disable_8259A_irq(unsigned int irq); -extern void enable_8259A_irq(unsigned int irq); -extern int i8259A_irq_pending(unsigned int irq); -extern void make_8259A_irq(unsigned int irq); -extern void init_8259A(int aeoi); -extern void send_IPI_self(int vector); -extern void init_VISWS_APIC_irqs(void); -extern void setup_IO_APIC(void); extern void enable_IO_APIC(void); -extern void disable_IO_APIC(void); -extern void print_IO_APIC(void); -extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn); -extern void send_IPI(int dest, int vector); -extern void setup_ioapic_dest(void); extern void native_init_IRQ(void); -extern unsigned long io_apic_irqs; - -extern atomic_t irq_err_count; -extern atomic_t irq_mis_count; - -#define IO_APIC_IRQ(x) (((x) >= 16) || ((1<<(x)) & io_apic_irqs)) - #include #define IRQ_NAME2(nr) nr##_interrupt(void) @@ -166,8 +102,4 @@ extern atomic_t irq_mis_count; "push $~(" #nr ") ; " \ "jmp common_interrupt"); -#define platform_legacy_irq(irq) ((irq) < 16) - #endif - -#endif /* _ASM_HW_IRQ_H */ From 9b7dc567d03d74a1fbae84e88949b6a60d922d82 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 May 2008 20:10:09 +0200 Subject: [PATCH 019/821] x86: unify interrupt vector defines The interrupt vector defines are copied 4 times around with minimal differences. Move them all into asm-x86/irq_vectors.h Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/entry_32.S | 2 +- arch/x86/kernel/vmiclock_32.c | 3 +- arch/x86/mach-visws/visws_apic.c | 3 +- include/asm-x86/hw_irq.h | 12 +- include/asm-x86/hw_irq_64.h | 71 -------- include/asm-x86/irq_32.h | 2 +- include/asm-x86/irq_64.h | 29 +-- include/asm-x86/irq_vectors.h | 168 ++++++++++++++++++ include/asm-x86/mach-default/irq_vectors.h | 96 ---------- .../asm-x86/mach-default/irq_vectors_limits.h | 16 -- include/asm-x86/mach-visws/irq_vectors.h | 62 ------- include/asm-x86/mach-voyager/irq_vectors.h | 79 -------- 12 files changed, 184 insertions(+), 359 deletions(-) create mode 100644 include/asm-x86/irq_vectors.h delete mode 100644 include/asm-x86/mach-default/irq_vectors.h delete mode 100644 include/asm-x86/mach-default/irq_vectors_limits.h delete mode 100644 include/asm-x86/mach-visws/irq_vectors.h delete mode 100644 include/asm-x86/mach-voyager/irq_vectors.h diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 2a609dc3271c..0c7f64b99e17 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -51,7 +51,7 @@ #include #include #include -#include "irq_vectors.h" +#include /* * We use macros for low-level operations which need to be overridden diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c index a2b030780aa9..ba7d19e102b1 100644 --- a/arch/x86/kernel/vmiclock_32.c +++ b/arch/x86/kernel/vmiclock_32.c @@ -33,8 +33,7 @@ #include #include #include - -#include +#include #define VMI_ONESHOT (VMI_ALARM_IS_ONESHOT | VMI_CYCLES_REAL | vmi_get_alarm_wiring()) #define VMI_PERIODIC (VMI_ALARM_IS_PERIODIC | VMI_CYCLES_REAL | vmi_get_alarm_wiring()) diff --git a/arch/x86/mach-visws/visws_apic.c b/arch/x86/mach-visws/visws_apic.c index cef9cb1d15ac..d8b2cfd85d92 100644 --- a/arch/x86/mach-visws/visws_apic.c +++ b/arch/x86/mach-visws/visws_apic.c @@ -21,10 +21,9 @@ #include #include #include +#include #include "cobalt.h" -#include "irq_vectors.h" - static DEFINE_SPINLOCK(cobalt_lock); diff --git a/include/asm-x86/hw_irq.h b/include/asm-x86/hw_irq.h index 38af08ed43cf..a8c5e8bdaa49 100644 --- a/include/asm-x86/hw_irq.h +++ b/include/asm-x86/hw_irq.h @@ -13,7 +13,7 @@ * unified by tglx */ -#define NMI_VECTOR 0x02 +#include #ifndef __ASSEMBLY__ @@ -75,6 +75,16 @@ extern void send_IPI(int dest, int vector); extern atomic_t irq_err_count; extern atomic_t irq_mis_count; +/* Voyager functions */ +extern asmlinkage void vic_cpi_interrupt(void); +extern asmlinkage void vic_sys_interrupt(void); +extern asmlinkage void vic_cmn_interrupt(void); +extern asmlinkage void qic_timer_interrupt(void); +extern asmlinkage void qic_invalidate_interrupt(void); +extern asmlinkage void qic_reschedule_interrupt(void); +extern asmlinkage void qic_enable_irq_interrupt(void); +extern asmlinkage void qic_call_function_interrupt(void); + #endif /* !ASSEMBLY_ */ #ifdef CONFIG_X86_32 diff --git a/include/asm-x86/hw_irq_64.h b/include/asm-x86/hw_irq_64.h index 28674576e9fe..98c9d494a711 100644 --- a/include/asm-x86/hw_irq_64.h +++ b/include/asm-x86/hw_irq_64.h @@ -1,74 +1,3 @@ -/* - * IDT vectors usable for external interrupt sources start - * at 0x20: - */ -#define FIRST_EXTERNAL_VECTOR 0x20 - -#define IA32_SYSCALL_VECTOR 0x80 - - -/* Reserve the lowest usable priority level 0x20 - 0x2f for triggering - * cleanup after irq migration. - */ -#define IRQ_MOVE_CLEANUP_VECTOR FIRST_EXTERNAL_VECTOR - -/* - * Vectors 0x30-0x3f are used for ISA interrupts. - */ -#define IRQ0_VECTOR (FIRST_EXTERNAL_VECTOR + 0x10) -#define IRQ1_VECTOR (IRQ0_VECTOR + 1) -#define IRQ2_VECTOR (IRQ0_VECTOR + 2) -#define IRQ3_VECTOR (IRQ0_VECTOR + 3) -#define IRQ4_VECTOR (IRQ0_VECTOR + 4) -#define IRQ5_VECTOR (IRQ0_VECTOR + 5) -#define IRQ6_VECTOR (IRQ0_VECTOR + 6) -#define IRQ7_VECTOR (IRQ0_VECTOR + 7) -#define IRQ8_VECTOR (IRQ0_VECTOR + 8) -#define IRQ9_VECTOR (IRQ0_VECTOR + 9) -#define IRQ10_VECTOR (IRQ0_VECTOR + 10) -#define IRQ11_VECTOR (IRQ0_VECTOR + 11) -#define IRQ12_VECTOR (IRQ0_VECTOR + 12) -#define IRQ13_VECTOR (IRQ0_VECTOR + 13) -#define IRQ14_VECTOR (IRQ0_VECTOR + 14) -#define IRQ15_VECTOR (IRQ0_VECTOR + 15) - -/* - * Special IRQ vectors used by the SMP architecture, 0xf0-0xff - * - * some of the following vectors are 'rare', they are merged - * into a single vector (CALL_FUNCTION_VECTOR) to save vector space. - * TLB, reschedule and local APIC vectors are performance-critical. - */ -#define SPURIOUS_APIC_VECTOR 0xff -#define ERROR_APIC_VECTOR 0xfe -#define RESCHEDULE_VECTOR 0xfd -#define CALL_FUNCTION_VECTOR 0xfc -/* fb free - please don't readd KDB here because it's useless - (hint - think what a NMI bit does to a vector) */ -#define THERMAL_APIC_VECTOR 0xfa -#define THRESHOLD_APIC_VECTOR 0xf9 -/* f8 free */ -#define INVALIDATE_TLB_VECTOR_END 0xf7 -#define INVALIDATE_TLB_VECTOR_START 0xf0 /* f0-f7 used for TLB flush */ - -#define NUM_INVALIDATE_TLB_VECTORS 8 - -/* - * Local APIC timer IRQ vector is on a different priority level, - * to work around the 'lost local interrupt if more than 2 IRQ - * sources per level' errata. - */ -#define LOCAL_TIMER_VECTOR 0xef - -/* - * First APIC vector available to drivers: (vectors 0x30-0xee) - * we start at 0x41 to spread out vectors evenly between priority - * levels. (0x80 is the syscall vector) - */ -#define FIRST_DEVICE_VECTOR (IRQ15_VECTOR + 2) -#define FIRST_SYSTEM_VECTOR 0xef /* duplicated in irq.h */ - - #ifndef __ASSEMBLY__ typedef int vector_irq_t[NR_VECTORS]; diff --git a/include/asm-x86/irq_32.h b/include/asm-x86/irq_32.h index 0b79f3185243..c5c7542f79ad 100644 --- a/include/asm-x86/irq_32.h +++ b/include/asm-x86/irq_32.h @@ -12,7 +12,7 @@ #include /* include comes from machine specific directory */ -#include "irq_vectors.h" +#include #include static inline int irq_canonicalize(int irq) diff --git a/include/asm-x86/irq_64.h b/include/asm-x86/irq_64.h index 7608176590b6..3037ec667bfb 100644 --- a/include/asm-x86/irq_64.h +++ b/include/asm-x86/irq_64.h @@ -11,34 +11,7 @@ */ #include - -#define TIMER_IRQ 0 - -/* - * 16 8259A IRQ's, 208 potential APIC interrupt sources. - * Right now the APIC is mostly only used for SMP. - * 256 vectors is an architectural limit. (we can have - * more than 256 devices theoretically, but they will - * have to use shared interrupts) - * Since vectors 0x00-0x1f are used/reserved for the CPU, - * the usable vector space is 0x20-0xff (224 vectors) - */ - -/* - * The maximum number of vectors supported by x86_64 processors - * is limited to 256. For processors other than x86_64, NR_VECTORS - * should be changed accordingly. - */ -#define NR_VECTORS 256 - -#define FIRST_SYSTEM_VECTOR 0xef /* duplicated in hw_irq.h */ - -#if NR_CPUS < MAX_IO_APICS -#define NR_IRQS (NR_VECTORS + (32 * NR_CPUS)) -#else -#define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS)) -#endif -#define NR_IRQ_VECTORS NR_IRQS +#include static inline int irq_canonicalize(int irq) { diff --git a/include/asm-x86/irq_vectors.h b/include/asm-x86/irq_vectors.h new file mode 100644 index 000000000000..daceaaf0a3a4 --- /dev/null +++ b/include/asm-x86/irq_vectors.h @@ -0,0 +1,168 @@ +#ifndef _ASM_IRQ_VECTORS_H +#define _ASM_IRQ_VECTORS_H + +#include + +#define NMI_VECTOR 0x02 + +/* + * IDT vectors usable for external interrupt sources start + * at 0x20: + */ +#define FIRST_EXTERNAL_VECTOR 0x20 + +#ifdef CONFIG_X86_32 +# define SYSCALL_VECTOR 0x80 +#else +# define IA32_SYSCALL_VECTOR 0x80 +#endif + +/* + * Vectors 0x20-0x2f are used for ISA interrupts on 32 bit. + * + * Reserve the lowest usable priority level 0x20 - 0x2f for triggering + * cleanup after irq migration on 64 bit. + */ +#define IRQ_MOVE_CLEANUP_VECTOR FIRST_EXTERNAL_VECTOR + +/* + * Vectors 0x30-0x3f are used for ISA interrupts on 64 bit + */ +#define IRQ0_VECTOR (FIRST_EXTERNAL_VECTOR + 0x10) +#define IRQ1_VECTOR (IRQ0_VECTOR + 1) +#define IRQ2_VECTOR (IRQ0_VECTOR + 2) +#define IRQ3_VECTOR (IRQ0_VECTOR + 3) +#define IRQ4_VECTOR (IRQ0_VECTOR + 4) +#define IRQ5_VECTOR (IRQ0_VECTOR + 5) +#define IRQ6_VECTOR (IRQ0_VECTOR + 6) +#define IRQ7_VECTOR (IRQ0_VECTOR + 7) +#define IRQ8_VECTOR (IRQ0_VECTOR + 8) +#define IRQ9_VECTOR (IRQ0_VECTOR + 9) +#define IRQ10_VECTOR (IRQ0_VECTOR + 10) +#define IRQ11_VECTOR (IRQ0_VECTOR + 11) +#define IRQ12_VECTOR (IRQ0_VECTOR + 12) +#define IRQ13_VECTOR (IRQ0_VECTOR + 13) +#define IRQ14_VECTOR (IRQ0_VECTOR + 14) +#define IRQ15_VECTOR (IRQ0_VECTOR + 15) + +/* + * Special IRQ vectors used by the SMP architecture, 0xf0-0xff + * + * some of the following vectors are 'rare', they are merged + * into a single vector (CALL_FUNCTION_VECTOR) to save vector space. + * TLB, reschedule and local APIC vectors are performance-critical. + * + * Vectors 0xf0-0xfa are free (reserved for future Linux use). + */ +#ifdef CONFIG_X86_32 + +# define SPURIOUS_APIC_VECTOR 0xff +# define ERROR_APIC_VECTOR 0xfe +# define INVALIDATE_TLB_VECTOR 0xfd +# define RESCHEDULE_VECTOR 0xfc +# define CALL_FUNCTION_VECTOR 0xfb +# define THERMAL_APIC_VECTOR 0xf0 + +#else + +#define SPURIOUS_APIC_VECTOR 0xff +#define ERROR_APIC_VECTOR 0xfe +#define RESCHEDULE_VECTOR 0xfd +#define CALL_FUNCTION_VECTOR 0xfc +#define THERMAL_APIC_VECTOR 0xfa +#define THRESHOLD_APIC_VECTOR 0xf9 +#define INVALIDATE_TLB_VECTOR_END 0xf7 +#define INVALIDATE_TLB_VECTOR_START 0xf0 /* f0-f7 used for TLB flush */ + +#define NUM_INVALIDATE_TLB_VECTORS 8 + +#endif + +/* + * Local APIC timer IRQ vector is on a different priority level, + * to work around the 'lost local interrupt if more than 2 IRQ + * sources per level' errata. + */ +#define LOCAL_TIMER_VECTOR 0xef + +/* + * First APIC vector available to drivers: (vectors 0x30-0xee) we + * start at 0x31(0x41) to spread out vectors evenly between priority + * levels. (0x80 is the syscall vector) + */ +#ifdef CONFIG_X86_32 +# define FIRST_DEVICE_VECTOR 0x31 +#else +# define FIRST_DEVICE_VECTOR (IRQ15_VECTOR + 2) +#endif + +#define FIRST_SYSTEM_VECTOR 0xef + +#define NR_VECTORS 256 + +#define FPU_IRQ 13 + +#define FIRST_VM86_IRQ 3 +#define LAST_VM86_IRQ 15 +#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15) + +#if !defined(CONFIG_X86_VISWS) && !defined(CONFIG_X86_VOYAGER) + +# if defined(CONFIG_X86_IO_APIC) || defined(CONFIG_PARAVIRT) + +# define NR_IRQS 224 + +# if (224 >= 32 * NR_CPUS) +# define NR_IRQ_VECTORS NR_IRQS +# else +# define NR_IRQ_VECTORS (32 * NR_CPUS) +# endif + +# else /* IO_APIC || PARAVIRT */ + +# define NR_IRQS 16 +# define NR_IRQ_VECTORS NR_IRQS + +# endif + +#else /* !VISWS && !VOYAGER */ + +# define NR_IRQS 224 +# define NR_IRQ_VECTORS NR_IRQS + +#endif /* VISWS */ + +/* Voyager specific defines */ +/* These define the CPIs we use in linux */ +#define VIC_CPI_LEVEL0 0 +#define VIC_CPI_LEVEL1 1 +/* now the fake CPIs */ +#define VIC_TIMER_CPI 2 +#define VIC_INVALIDATE_CPI 3 +#define VIC_RESCHEDULE_CPI 4 +#define VIC_ENABLE_IRQ_CPI 5 +#define VIC_CALL_FUNCTION_CPI 6 + +/* Now the QIC CPIs: Since we don't need the two initial levels, + * these are 2 less than the VIC CPIs */ +#define QIC_CPI_OFFSET 1 +#define QIC_TIMER_CPI (VIC_TIMER_CPI - QIC_CPI_OFFSET) +#define QIC_INVALIDATE_CPI (VIC_INVALIDATE_CPI - QIC_CPI_OFFSET) +#define QIC_RESCHEDULE_CPI (VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET) +#define QIC_ENABLE_IRQ_CPI (VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET) +#define QIC_CALL_FUNCTION_CPI (VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET) + +#define VIC_START_FAKE_CPI VIC_TIMER_CPI +#define VIC_END_FAKE_CPI VIC_CALL_FUNCTION_CPI + +/* this is the SYS_INT CPI. */ +#define VIC_SYS_INT 8 +#define VIC_CMN_INT 15 + +/* This is the boot CPI for alternate processors. It gets overwritten + * by the above once the system has activated all available processors */ +#define VIC_CPU_BOOT_CPI VIC_CPI_LEVEL0 +#define VIC_CPU_BOOT_ERRATA_CPI (VIC_CPI_LEVEL0 + 8) + + +#endif /* _ASM_IRQ_VECTORS_H */ diff --git a/include/asm-x86/mach-default/irq_vectors.h b/include/asm-x86/mach-default/irq_vectors.h deleted file mode 100644 index 881c63ca61ad..000000000000 --- a/include/asm-x86/mach-default/irq_vectors.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * This file should contain #defines for all of the interrupt vector - * numbers used by this architecture. - * - * In addition, there are some standard defines: - * - * FIRST_EXTERNAL_VECTOR: - * The first free place for external interrupts - * - * SYSCALL_VECTOR: - * The IRQ vector a syscall makes the user to kernel transition - * under. - * - * TIMER_IRQ: - * The IRQ number the timer interrupt comes in at. - * - * NR_IRQS: - * The total number of interrupt vectors (including all the - * architecture specific interrupts) needed. - * - */ -#ifndef _ASM_IRQ_VECTORS_H -#define _ASM_IRQ_VECTORS_H - -/* - * IDT vectors usable for external interrupt sources start - * at 0x20: - */ -#define FIRST_EXTERNAL_VECTOR 0x20 - -#define SYSCALL_VECTOR 0x80 - -/* - * Vectors 0x20-0x2f are used for ISA interrupts. - */ - -/* - * Special IRQ vectors used by the SMP architecture, 0xf0-0xff - * - * some of the following vectors are 'rare', they are merged - * into a single vector (CALL_FUNCTION_VECTOR) to save vector space. - * TLB, reschedule and local APIC vectors are performance-critical. - * - * Vectors 0xf0-0xfa are free (reserved for future Linux use). - */ -#define SPURIOUS_APIC_VECTOR 0xff -#define ERROR_APIC_VECTOR 0xfe -#define INVALIDATE_TLB_VECTOR 0xfd -#define RESCHEDULE_VECTOR 0xfc -#define CALL_FUNCTION_VECTOR 0xfb - -#define THERMAL_APIC_VECTOR 0xf0 -/* - * Local APIC timer IRQ vector is on a different priority level, - * to work around the 'lost local interrupt if more than 2 IRQ - * sources per level' errata. - */ -#define LOCAL_TIMER_VECTOR 0xef - -/* - * First APIC vector available to drivers: (vectors 0x30-0xee) - * we start at 0x31 to spread out vectors evenly between priority - * levels. (0x80 is the syscall vector) - */ -#define FIRST_DEVICE_VECTOR 0x31 -#define FIRST_SYSTEM_VECTOR 0xef - -#define TIMER_IRQ 0 - -/* - * 16 8259A IRQ's, 208 potential APIC interrupt sources. - * Right now the APIC is mostly only used for SMP. - * 256 vectors is an architectural limit. (we can have - * more than 256 devices theoretically, but they will - * have to use shared interrupts) - * Since vectors 0x00-0x1f are used/reserved for the CPU, - * the usable vector space is 0x20-0xff (224 vectors) - */ - -/* - * The maximum number of vectors supported by i386 processors - * is limited to 256. For processors other than i386, NR_VECTORS - * should be changed accordingly. - */ -#define NR_VECTORS 256 - -#include "irq_vectors_limits.h" - -#define FPU_IRQ 13 - -#define FIRST_VM86_IRQ 3 -#define LAST_VM86_IRQ 15 -#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15) - - -#endif /* _ASM_IRQ_VECTORS_H */ diff --git a/include/asm-x86/mach-default/irq_vectors_limits.h b/include/asm-x86/mach-default/irq_vectors_limits.h deleted file mode 100644 index a90c7a60109f..000000000000 --- a/include/asm-x86/mach-default/irq_vectors_limits.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _ASM_IRQ_VECTORS_LIMITS_H -#define _ASM_IRQ_VECTORS_LIMITS_H - -#if defined(CONFIG_X86_IO_APIC) || defined(CONFIG_PARAVIRT) -#define NR_IRQS 224 -# if (224 >= 32 * NR_CPUS) -# define NR_IRQ_VECTORS NR_IRQS -# else -# define NR_IRQ_VECTORS (32 * NR_CPUS) -# endif -#else -#define NR_IRQS 16 -#define NR_IRQ_VECTORS NR_IRQS -#endif - -#endif /* _ASM_IRQ_VECTORS_LIMITS_H */ diff --git a/include/asm-x86/mach-visws/irq_vectors.h b/include/asm-x86/mach-visws/irq_vectors.h deleted file mode 100644 index cb572d8db505..000000000000 --- a/include/asm-x86/mach-visws/irq_vectors.h +++ /dev/null @@ -1,62 +0,0 @@ -#ifndef _ASM_IRQ_VECTORS_H -#define _ASM_IRQ_VECTORS_H - -/* - * IDT vectors usable for external interrupt sources start - * at 0x20: - */ -#define FIRST_EXTERNAL_VECTOR 0x20 - -#define SYSCALL_VECTOR 0x80 - -/* - * Vectors 0x20-0x2f are used for ISA interrupts. - */ - -/* - * Special IRQ vectors used by the SMP architecture, 0xf0-0xff - * - * some of the following vectors are 'rare', they are merged - * into a single vector (CALL_FUNCTION_VECTOR) to save vector space. - * TLB, reschedule and local APIC vectors are performance-critical. - * - * Vectors 0xf0-0xfa are free (reserved for future Linux use). - */ -#define SPURIOUS_APIC_VECTOR 0xff -#define ERROR_APIC_VECTOR 0xfe -#define INVALIDATE_TLB_VECTOR 0xfd -#define RESCHEDULE_VECTOR 0xfc -#define CALL_FUNCTION_VECTOR 0xfb - -#define THERMAL_APIC_VECTOR 0xf0 -/* - * Local APIC timer IRQ vector is on a different priority level, - * to work around the 'lost local interrupt if more than 2 IRQ - * sources per level' errata. - */ -#define LOCAL_TIMER_VECTOR 0xef - -/* - * First APIC vector available to drivers: (vectors 0x30-0xee) - * we start at 0x31 to spread out vectors evenly between priority - * levels. (0x80 is the syscall vector) - */ -#define FIRST_DEVICE_VECTOR 0x31 -#define FIRST_SYSTEM_VECTOR 0xef - -#define TIMER_IRQ 0 - -/* - * IRQ definitions - */ -#define NR_VECTORS 256 -#define NR_IRQS 224 -#define NR_IRQ_VECTORS NR_IRQS - -#define FPU_IRQ 13 - -#define FIRST_VM86_IRQ 3 -#define LAST_VM86_IRQ 15 -#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15) - -#endif /* _ASM_IRQ_VECTORS_H */ diff --git a/include/asm-x86/mach-voyager/irq_vectors.h b/include/asm-x86/mach-voyager/irq_vectors.h deleted file mode 100644 index 165421f5821c..000000000000 --- a/include/asm-x86/mach-voyager/irq_vectors.h +++ /dev/null @@ -1,79 +0,0 @@ -/* -*- mode: c; c-basic-offset: 8 -*- */ - -/* Copyright (C) 2002 - * - * Author: James.Bottomley@HansenPartnership.com - * - * linux/arch/i386/voyager/irq_vectors.h - * - * This file provides definitions for the VIC and QIC CPIs - */ - -#ifndef _ASM_IRQ_VECTORS_H -#define _ASM_IRQ_VECTORS_H - -/* - * IDT vectors usable for external interrupt sources start - * at 0x20: - */ -#define FIRST_EXTERNAL_VECTOR 0x20 - -#define SYSCALL_VECTOR 0x80 - -/* - * Vectors 0x20-0x2f are used for ISA interrupts. - */ - -/* These define the CPIs we use in linux */ -#define VIC_CPI_LEVEL0 0 -#define VIC_CPI_LEVEL1 1 -/* now the fake CPIs */ -#define VIC_TIMER_CPI 2 -#define VIC_INVALIDATE_CPI 3 -#define VIC_RESCHEDULE_CPI 4 -#define VIC_ENABLE_IRQ_CPI 5 -#define VIC_CALL_FUNCTION_CPI 6 - -/* Now the QIC CPIs: Since we don't need the two initial levels, - * these are 2 less than the VIC CPIs */ -#define QIC_CPI_OFFSET 1 -#define QIC_TIMER_CPI (VIC_TIMER_CPI - QIC_CPI_OFFSET) -#define QIC_INVALIDATE_CPI (VIC_INVALIDATE_CPI - QIC_CPI_OFFSET) -#define QIC_RESCHEDULE_CPI (VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET) -#define QIC_ENABLE_IRQ_CPI (VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET) -#define QIC_CALL_FUNCTION_CPI (VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET) - -#define VIC_START_FAKE_CPI VIC_TIMER_CPI -#define VIC_END_FAKE_CPI VIC_CALL_FUNCTION_CPI - -/* this is the SYS_INT CPI. */ -#define VIC_SYS_INT 8 -#define VIC_CMN_INT 15 - -/* This is the boot CPI for alternate processors. It gets overwritten - * by the above once the system has activated all available processors */ -#define VIC_CPU_BOOT_CPI VIC_CPI_LEVEL0 -#define VIC_CPU_BOOT_ERRATA_CPI (VIC_CPI_LEVEL0 + 8) - -#define NR_VECTORS 256 -#define NR_IRQS 224 -#define NR_IRQ_VECTORS NR_IRQS - -#define FPU_IRQ 13 - -#define FIRST_VM86_IRQ 3 -#define LAST_VM86_IRQ 15 -#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15) - -#ifndef __ASSEMBLY__ -extern asmlinkage void vic_cpi_interrupt(void); -extern asmlinkage void vic_sys_interrupt(void); -extern asmlinkage void vic_cmn_interrupt(void); -extern asmlinkage void qic_timer_interrupt(void); -extern asmlinkage void qic_invalidate_interrupt(void); -extern asmlinkage void qic_reschedule_interrupt(void); -extern asmlinkage void qic_enable_irq_interrupt(void); -extern asmlinkage void qic_call_function_interrupt(void); -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_IRQ_VECTORS_H */ From 0bc471d93051a19545257909bc2ed2ad3b389b54 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 May 2008 21:55:12 +0200 Subject: [PATCH 020/821] x86: move BUILD_IRQ macro magic to i8259_64.c i8259_64.c is the only place which uses those macros. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/i8259_64.c | 14 ++++++++++++++ include/asm-x86/hw_irq_64.h | 14 -------------- 2 files changed, 14 insertions(+), 14 deletions(-) diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c index fa57a1568508..c4ae4769ce67 100644 --- a/arch/x86/kernel/i8259_64.c +++ b/arch/x86/kernel/i8259_64.c @@ -34,6 +34,20 @@ * interrupt-controller happy. */ +#define IRQ_NAME2(nr) nr##_interrupt(void) +#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr) + +/* + * SMP has a few special interrupts for IPI messages + */ + +#define BUILD_IRQ(nr) \ + asmlinkage void IRQ_NAME(nr); \ + asm("\n.p2align\n" \ + "IRQ" #nr "_interrupt:\n\t" \ + "push $~(" #nr ") ; " \ + "jmp common_interrupt"); + #define BI(x,y) \ BUILD_IRQ(x##y) diff --git a/include/asm-x86/hw_irq_64.h b/include/asm-x86/hw_irq_64.h index 98c9d494a711..9305f7456a7f 100644 --- a/include/asm-x86/hw_irq_64.h +++ b/include/asm-x86/hw_irq_64.h @@ -17,18 +17,4 @@ extern void native_init_IRQ(void); #include -#define IRQ_NAME2(nr) nr##_interrupt(void) -#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr) - -/* - * SMP has a few special interrupts for IPI messages - */ - -#define BUILD_IRQ(nr) \ - asmlinkage void IRQ_NAME(nr); \ - asm("\n.p2align\n" \ - "IRQ" #nr "_interrupt:\n\t" \ - "push $~(" #nr ") ; " \ - "jmp common_interrupt"); - #endif From 97e7b6f54c0d66586a658e985630cd63040311fb Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 May 2008 22:02:25 +0200 Subject: [PATCH 021/821] x86: unify apic interrupt function declarations Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- include/asm-x86/hw_irq.h | 4 ++++ include/asm-x86/hw_irq_64.h | 3 --- include/asm-x86/irq_64.h | 2 ++ 3 files changed, 6 insertions(+), 3 deletions(-) diff --git a/include/asm-x86/hw_irq.h b/include/asm-x86/hw_irq.h index a8c5e8bdaa49..cdb09d77af03 100644 --- a/include/asm-x86/hw_irq.h +++ b/include/asm-x86/hw_irq.h @@ -67,6 +67,10 @@ extern void print_IO_APIC(void); extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn); extern void setup_ioapic_dest(void); +#ifdef CONFIG_X86_64 +extern void enable_IO_APIC(void); +#endif + /* IPI functions */ extern void send_IPI_self(int vector); extern void send_IPI(int dest, int vector); diff --git a/include/asm-x86/hw_irq_64.h b/include/asm-x86/hw_irq_64.h index 9305f7456a7f..428785b3634b 100644 --- a/include/asm-x86/hw_irq_64.h +++ b/include/asm-x86/hw_irq_64.h @@ -12,9 +12,6 @@ extern spinlock_t vector_lock; * Interrupt entry/exit code at both C and assembly level */ -extern void enable_IO_APIC(void); -extern void native_init_IRQ(void); - #include #endif diff --git a/include/asm-x86/irq_64.h b/include/asm-x86/irq_64.h index 3037ec667bfb..1ef233d15dc4 100644 --- a/include/asm-x86/irq_64.h +++ b/include/asm-x86/irq_64.h @@ -27,4 +27,6 @@ extern void fixup_irqs(cpumask_t map); #define __ARCH_HAS_DO_SOFTIRQ 1 +extern void native_init_IRQ(void); + #endif /* _ASM_IRQ_H */ From 22dc12d1f694b9af88e616ab758ff90c69d0fc83 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 May 2008 22:10:39 +0200 Subject: [PATCH 022/821] x86: unify hwirq.h Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- include/asm-x86/hw_irq.h | 15 +++++++++------ include/asm-x86/hw_irq_32.h | 5 ----- include/asm-x86/hw_irq_64.h | 17 ----------------- 3 files changed, 9 insertions(+), 28 deletions(-) delete mode 100644 include/asm-x86/hw_irq_32.h delete mode 100644 include/asm-x86/hw_irq_64.h diff --git a/include/asm-x86/hw_irq.h b/include/asm-x86/hw_irq.h index cdb09d77af03..1db2dff1ef49 100644 --- a/include/asm-x86/hw_irq.h +++ b/include/asm-x86/hw_irq.h @@ -89,12 +89,15 @@ extern asmlinkage void qic_reschedule_interrupt(void); extern asmlinkage void qic_enable_irq_interrupt(void); extern asmlinkage void qic_call_function_interrupt(void); +#ifdef CONFIG_X86_32 +extern void (*const interrupt[NR_IRQS])(void); +#else +typedef int vector_irq_t[NR_VECTORS]; +DECLARE_PER_CPU(vector_irq_t, vector_irq); +extern void __setup_vector_irq(int cpu); +extern spinlock_t vector_lock; +#endif + #endif /* !ASSEMBLY_ */ -#ifdef CONFIG_X86_32 -# include "hw_irq_32.h" -#else -# include "hw_irq_64.h" -#endif - #endif diff --git a/include/asm-x86/hw_irq_32.h b/include/asm-x86/hw_irq_32.h deleted file mode 100644 index 89fca5af5958..000000000000 --- a/include/asm-x86/hw_irq_32.h +++ /dev/null @@ -1,5 +0,0 @@ - -extern void (*const interrupt[NR_IRQS])(void); - - - diff --git a/include/asm-x86/hw_irq_64.h b/include/asm-x86/hw_irq_64.h deleted file mode 100644 index 428785b3634b..000000000000 --- a/include/asm-x86/hw_irq_64.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __ASSEMBLY__ - -typedef int vector_irq_t[NR_VECTORS]; -DECLARE_PER_CPU(vector_irq_t, vector_irq); -extern void __setup_vector_irq(int cpu); -extern spinlock_t vector_lock; - -/* - * Various low-level irq details needed by irq.c, process.c, - * time.c, io_apic.c and smp.c - * - * Interrupt entry/exit code at both C and assembly level - */ - -#include - -#endif From 22067d4501bfb47c8ca34144f68fad734178914d Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 May 2008 22:14:44 +0200 Subject: [PATCH 023/821] x86: unify irq.h Not much difference in those files. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- include/asm-x86/irq.h | 53 +++++++++++++++++++++++++++++++++++++--- include/asm-x86/irq_32.h | 51 -------------------------------------- include/asm-x86/irq_64.h | 32 ------------------------ 3 files changed, 49 insertions(+), 87 deletions(-) delete mode 100644 include/asm-x86/irq_32.h delete mode 100644 include/asm-x86/irq_64.h diff --git a/include/asm-x86/irq.h b/include/asm-x86/irq.h index 7ba905465a53..1a2925757317 100644 --- a/include/asm-x86/irq.h +++ b/include/asm-x86/irq.h @@ -1,5 +1,50 @@ -#ifdef CONFIG_X86_32 -# include "irq_32.h" -#else -# include "irq_64.h" +#ifndef _ASM_IRQ_H +#define _ASM_IRQ_H +/* + * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar + * + * IRQ/IPI changes taken from work by Thomas Radke + * + */ + +#include +#include + +static inline int irq_canonicalize(int irq) +{ + return ((irq == 2) ? 9 : irq); +} + +#ifdef CONFIG_X86_LOCAL_APIC +# define ARCH_HAS_NMI_WATCHDOG #endif + +#ifdef CONFIG_4KSTACKS + extern void irq_ctx_init(int cpu); + extern void irq_ctx_exit(int cpu); +# define __ARCH_HAS_DO_SOFTIRQ +#else +# define irq_ctx_init(cpu) do { } while (0) +# define irq_ctx_exit(cpu) do { } while (0) +# ifdef CONFIG_X86_64 +# define __ARCH_HAS_DO_SOFTIRQ +# endif +#endif + +#ifdef CONFIG_IRQBALANCE +extern int irqbalance_disable(char *str); +#endif + +#ifdef CONFIG_HOTPLUG_CPU +#include +extern void fixup_irqs(cpumask_t map); +#endif + +extern unsigned int do_IRQ(struct pt_regs *regs); +extern void init_IRQ(void); +extern void native_init_IRQ(void); + +/* Interrupt vector management */ +extern DECLARE_BITMAP(used_vectors, NR_VECTORS); + +#endif /* _ASM_IRQ_H */ diff --git a/include/asm-x86/irq_32.h b/include/asm-x86/irq_32.h deleted file mode 100644 index c5c7542f79ad..000000000000 --- a/include/asm-x86/irq_32.h +++ /dev/null @@ -1,51 +0,0 @@ -#ifndef _ASM_IRQ_H -#define _ASM_IRQ_H - -/* - * linux/include/asm/irq.h - * - * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar - * - * IRQ/IPI changes taken from work by Thomas Radke - * - */ - -#include -/* include comes from machine specific directory */ -#include -#include - -static inline int irq_canonicalize(int irq) -{ - return ((irq == 2) ? 9 : irq); -} - -#ifdef CONFIG_X86_LOCAL_APIC -# define ARCH_HAS_NMI_WATCHDOG /* See include/linux/nmi.h */ -#endif - -#ifdef CONFIG_4KSTACKS - extern void irq_ctx_init(int cpu); - extern void irq_ctx_exit(int cpu); -# define __ARCH_HAS_DO_SOFTIRQ -#else -# define irq_ctx_init(cpu) do { } while (0) -# define irq_ctx_exit(cpu) do { } while (0) -#endif - -#ifdef CONFIG_IRQBALANCE -extern int irqbalance_disable(char *str); -#endif - -#ifdef CONFIG_HOTPLUG_CPU -extern void fixup_irqs(cpumask_t map); -#endif - -unsigned int do_IRQ(struct pt_regs *regs); -void init_IRQ(void); -void __init native_init_IRQ(void); - -/* Interrupt vector management */ -extern DECLARE_BITMAP(used_vectors, NR_VECTORS); - -#endif /* _ASM_IRQ_H */ diff --git a/include/asm-x86/irq_64.h b/include/asm-x86/irq_64.h deleted file mode 100644 index 1ef233d15dc4..000000000000 --- a/include/asm-x86/irq_64.h +++ /dev/null @@ -1,32 +0,0 @@ -#ifndef _ASM_IRQ_H -#define _ASM_IRQ_H - -/* - * linux/include/asm/irq.h - * - * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar - * - * IRQ/IPI changes taken from work by Thomas Radke - * - */ - -#include -#include - -static inline int irq_canonicalize(int irq) -{ - return ((irq == 2) ? 9 : irq); -} - -#define ARCH_HAS_NMI_WATCHDOG /* See include/linux/nmi.h */ - -#ifdef CONFIG_HOTPLUG_CPU -#include -extern void fixup_irqs(cpumask_t map); -#endif - -#define __ARCH_HAS_DO_SOFTIRQ 1 - -extern void native_init_IRQ(void); - -#endif /* _ASM_IRQ_H */ From 88a83350bc1955fa9d8fca059e19bc360fcef2ba Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 May 2008 23:19:26 +0200 Subject: [PATCH 024/821] x86: declare setup_apic_routing Global functions need a prototype. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- include/asm-x86/genapic_64.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/asm-x86/genapic_64.h b/include/asm-x86/genapic_64.h index 1de931b263ce..0f8504627c41 100644 --- a/include/asm-x86/genapic_64.h +++ b/include/asm-x86/genapic_64.h @@ -44,4 +44,6 @@ DECLARE_PER_CPU(int, x2apic_extra_bits); extern void uv_cpu_init(void); extern int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip); +extern void setup_apic_routing(void); + #endif From 1a331957efd214fc3a84f70956dfaec65e70c031 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 3 May 2008 00:30:50 +0200 Subject: [PATCH 025/821] x86: move eisa_set_level_irq declaration to header Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 2 -- include/asm-x86/hw_irq.h | 3 +++ 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index c49ebcc6c41e..671591fcc61d 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -507,8 +507,6 @@ int acpi_register_gsi(u32 gsi, int triggering, int polarity) * Make sure all (legacy) PCI IRQs are set as level-triggered. */ if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) { - extern void eisa_set_level_irq(unsigned int irq); - if (triggering == ACPI_LEVEL_SENSITIVE) eisa_set_level_irq(gsi); } diff --git a/include/asm-x86/hw_irq.h b/include/asm-x86/hw_irq.h index 1db2dff1ef49..1428b41dcbb9 100644 --- a/include/asm-x86/hw_irq.h +++ b/include/asm-x86/hw_irq.h @@ -79,6 +79,9 @@ extern void send_IPI(int dest, int vector); extern atomic_t irq_err_count; extern atomic_t irq_mis_count; +/* EISA */ +extern void eisa_set_level_irq(unsigned int irq); + /* Voyager functions */ extern asmlinkage void vic_cpi_interrupt(void); extern asmlinkage void vic_sys_interrupt(void); From 305b92a2323eeaa4b481f409d54f778dd7e21a46 Mon Sep 17 00:00:00 2001 From: Alan Mayer Date: Tue, 15 Apr 2008 15:36:56 -0500 Subject: [PATCH 026/821] x86: change FIRST_SYSTEM_VECTOR to a variable The SGI UV system needs several more system vectors than a vanilla x86_64 system. Rather than burden the other archs with extra system vectors that they don't use, change FIRST_SYSTEM_VECTOR to a variable, so that it can be dynamic. Signed-off-by: Alan Mayer Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/apic_32.c | 14 +++++++------- arch/x86/kernel/i8259_64.c | 30 +++++++++++++++--------------- arch/x86/kernel/io_apic_32.c | 8 ++++++-- arch/x86/kernel/io_apic_64.c | 6 +++++- include/asm-x86/desc.h | 22 ++++++++++++++++++++++ include/asm-x86/irq_vectors.h | 2 -- 6 files changed, 55 insertions(+), 27 deletions(-) diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 4b99b1bdeb6c..807158e4b5d0 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -1351,13 +1351,13 @@ void __init smp_intr_init(void) * The reschedule interrupt is a CPU-to-CPU reschedule-helper * IPI, driven by wakeup. */ - set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); + alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); /* IPI for invalidation */ - set_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt); + alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt); /* IPI for generic function call */ - set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); + alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); } #endif @@ -1370,15 +1370,15 @@ void __init apic_intr_init(void) smp_intr_init(); #endif /* self generated IPI for local APIC timer */ - set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); + alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); /* IPI vectors for APIC spurious and error interrupts */ - set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); + alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); /* thermal monitor LVT interrupt */ #ifdef CONFIG_X86_MCE_P4THERMAL - set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); + alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); #endif } diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c index c4ae4769ce67..1870e0e86559 100644 --- a/arch/x86/kernel/i8259_64.c +++ b/arch/x86/kernel/i8259_64.c @@ -493,33 +493,33 @@ void __init native_init_IRQ(void) * The reschedule interrupt is a CPU-to-CPU reschedule-helper * IPI, driven by wakeup. */ - set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); + alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); /* IPIs for invalidation */ - set_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); /* IPI for generic function call */ - set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); + alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); /* Low priority IPI to cleanup after moving an irq */ set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); #endif - set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); - set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); + alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); + alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); /* self generated IPI for local APIC timer */ - set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); + alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); /* IPI vectors for APIC spurious and error interrupts */ - set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); + alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); if (!acpi_ioapic) setup_irq(2, &irq2); diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index a40d54fc1fdd..0ae4a9d00ce8 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -83,6 +83,10 @@ int mp_irq_entries; static int disable_timer_pin_1 __initdata; +int first_system_vector = 0xfe; + +char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE}; + /* * Rough estimation of how many shared IRQs there are, can * be changed anytime. @@ -1176,7 +1180,7 @@ static int __assign_irq_vector(int irq) offset = current_offset; next: vector += 8; - if (vector >= FIRST_SYSTEM_VECTOR) { + if (vector >= first_system_vector) { offset = (offset + 1) % 8; vector = FIRST_DEVICE_VECTOR + offset; } @@ -2269,7 +2273,7 @@ void __init setup_IO_APIC(void) int i; /* Reserve all the system vectors. */ - for (i = FIRST_SYSTEM_VECTOR; i < NR_VECTORS; i++) + for (i = first_system_vector; i < NR_VECTORS; i++) set_bit(i, used_vectors); enable_IO_APIC(); diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index ef1a8dfcc529..f1e1ae3e5c7d 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -82,6 +82,10 @@ struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = { static int assign_irq_vector(int irq, cpumask_t mask); +int first_system_vector = 0xfe; + +char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE}; + #define __apicdebuginit __init int sis_apic_bug; /* not actually supported, dummy for compile */ @@ -730,7 +734,7 @@ static int __assign_irq_vector(int irq, cpumask_t mask) offset = current_offset; next: vector += 8; - if (vector >= FIRST_SYSTEM_VECTOR) { + if (vector >= first_system_vector) { /* If we run out of vectors on large boxen, must share them. */ offset = (offset + 1) % 8; vector = FIRST_DEVICE_VECTOR + offset; diff --git a/include/asm-x86/desc.h b/include/asm-x86/desc.h index 268a012bcd79..b3875d4b4fab 100644 --- a/include/asm-x86/desc.h +++ b/include/asm-x86/desc.h @@ -311,6 +311,28 @@ static inline void set_intr_gate(unsigned int n, void *addr) _set_gate(n, GATE_INTERRUPT, addr, 0, 0, __KERNEL_CS); } +#define SYS_VECTOR_FREE 0 +#define SYS_VECTOR_ALLOCED 1 + +extern int first_system_vector; +extern char system_vectors[]; + +static inline void alloc_system_vector(int vector) +{ + if (system_vectors[vector] == SYS_VECTOR_FREE) { + system_vectors[vector] = SYS_VECTOR_ALLOCED; + if (first_system_vector > vector) + first_system_vector = vector; + } else + BUG(); +} + +static inline void alloc_intr_gate(unsigned int n, void *addr) +{ + alloc_system_vector(n); + set_intr_gate(n, addr); +} + /* * This routine sets up an interrupt gate at directory privilege level 3. */ diff --git a/include/asm-x86/irq_vectors.h b/include/asm-x86/irq_vectors.h index daceaaf0a3a4..3cb6d8c77b39 100644 --- a/include/asm-x86/irq_vectors.h +++ b/include/asm-x86/irq_vectors.h @@ -96,8 +96,6 @@ # define FIRST_DEVICE_VECTOR (IRQ15_VECTOR + 2) #endif -#define FIRST_SYSTEM_VECTOR 0xef - #define NR_VECTORS 256 #define FPU_IRQ 13 From ce17833183bf0a08ce3d174a2088eff0a06f2080 Mon Sep 17 00:00:00 2001 From: Alan Mayer Date: Wed, 16 Apr 2008 15:17:20 -0500 Subject: [PATCH 027/821] x86: change FIRST_SYSTEM_VECTOR to a variable, fix Fixes the build error introduced by my FIRST_SYSTEM_VECTOR patch Signed-off-by: Alan Mayer Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/apic_32.c | 4 ++++ arch/x86/kernel/io_apic_32.c | 4 ---- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 807158e4b5d0..d5767cb19d56 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -71,6 +71,10 @@ int local_apic_timer_disabled; int local_apic_timer_c2_ok; EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); +int first_system_vector = 0xfe; + +char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE}; + /* * Debug level, exported for io_apic.c */ diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 0ae4a9d00ce8..76769ccb1425 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -83,10 +83,6 @@ int mp_irq_entries; static int disable_timer_pin_1 __initdata; -int first_system_vector = 0xfe; - -char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE}; - /* * Rough estimation of how many shared IRQs there are, can * be changed anytime. From 04b361abfdc522239e3a071f3afdebf5787d9f03 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 5 May 2008 12:36:38 +0200 Subject: [PATCH 028/821] i386: Execute stack overflow warning on interrupt stack v2 Previously the reporting printk would run on the process stack, which risks overflow an already low stack. Instead execute it on the interrupt stack. This makes it more likely for the printk to make it actually out. It adds one not taken test/branch more to the interrupt path when stack overflow checking is enabled. We could avoid that by duplicating more code, but that seemed not worth it. Based on an observation by Eric Sandeen. v2: Fix warnings in some configs Signed-off-by: Andi Kleen Cc: mingo@elte.hu Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/irq_32.c | 49 +++++++++++++++++++++++++++------------- 1 file changed, 33 insertions(+), 16 deletions(-) diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c index 147352df28b9..3f76561da815 100644 --- a/arch/x86/kernel/irq_32.c +++ b/arch/x86/kernel/irq_32.c @@ -61,6 +61,26 @@ static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly; static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly; #endif +static void stack_overflow(void) +{ + printk("low stack detected by irq handler\n"); + dump_stack(); +} + +static inline void call_on_stack2(void *func, void *stack, + unsigned long arg1, unsigned long arg2) +{ + unsigned long bx; + asm volatile( + " xchgl %%ebx,%%esp \n" + " call *%%edi \n" + " movl %%ebx,%%esp \n" + : "=a" (arg1), "=d" (arg2), "=b" (bx) + : "0" (arg1), "1" (arg2), "2" (stack), + "D" (func) + : "memory", "cc", "ecx"); +} + /* * do_IRQ handles all normal device IRQ's (the special * SMP cross-CPU interrupts have their own specific @@ -76,6 +96,7 @@ unsigned int do_IRQ(struct pt_regs *regs) union irq_ctx *curctx, *irqctx; u32 *isp; #endif + int overflow = 0; if (unlikely((unsigned)irq >= NR_IRQS)) { printk(KERN_EMERG "%s: cannot handle IRQ %d\n", @@ -92,11 +113,8 @@ unsigned int do_IRQ(struct pt_regs *regs) __asm__ __volatile__("andl %%esp,%0" : "=r" (sp) : "0" (THREAD_SIZE - 1)); - if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) { - printk("do_IRQ: stack overflow: %ld\n", - sp - sizeof(struct thread_info)); - dump_stack(); - } + if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) + overflow = 1; } #endif @@ -112,8 +130,6 @@ unsigned int do_IRQ(struct pt_regs *regs) * current stack (which is the irq stack already after all) */ if (curctx != irqctx) { - int arg1, arg2, bx; - /* build the stack frame on the IRQ stack */ isp = (u32*) ((char*)irqctx + sizeof(*irqctx)); irqctx->tinfo.task = curctx->tinfo.task; @@ -127,18 +143,19 @@ unsigned int do_IRQ(struct pt_regs *regs) (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) | (curctx->tinfo.preempt_count & SOFTIRQ_MASK); - asm volatile( - " xchgl %%ebx,%%esp \n" - " call *%%edi \n" - " movl %%ebx,%%esp \n" - : "=a" (arg1), "=d" (arg2), "=b" (bx) - : "0" (irq), "1" (desc), "2" (isp), - "D" (desc->handle_irq) - : "memory", "cc", "ecx" - ); + /* Execute warning on interrupt stack */ + if (unlikely(overflow)) + call_on_stack2(stack_overflow, isp, 0, 0); + + call_on_stack2(desc->handle_irq, isp, irq, (unsigned long)desc); } else #endif + { + /* AK: Slightly bogus here */ + if (overflow) + stack_overflow(); desc->handle_irq(irq, desc); + } irq_exit(); set_irq_regs(old_regs); From de9b10af1287bf25b9c0433de53a2e95ef611aa7 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 5 May 2008 15:58:15 +0200 Subject: [PATCH 029/821] x86: janitor stack overflow warning patch Add KERN_WARNING to the printk as this could not be done in the original patch, which allegedly only moves code around. Un#ifdef do_IRQ. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/irq_32.c | 146 +++++++++++++++++++++------------------ 1 file changed, 80 insertions(+), 66 deletions(-) diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c index 3f76561da815..1c470d2e5af7 100644 --- a/arch/x86/kernel/irq_32.c +++ b/arch/x86/kernel/irq_32.c @@ -48,6 +48,29 @@ void ack_bad_irq(unsigned int irq) #endif } +#ifdef CONFIG_DEBUG_STACKOVERFLOW +/* Debugging check for stack overflow: is there less than 1KB free? */ +static int check_stack_overflow(void) +{ + long sp; + + __asm__ __volatile__("andl %%esp,%0" : + "=r" (sp) : "0" (THREAD_SIZE - 1)); + + return sp < (sizeof(struct thread_info) + STACK_WARN); +} + +static void print_stack_overflow(void) +{ + printk(KERN_WARNING "low stack detected by irq handler\n"); + dump_stack(); +} + +#else +static inline int check_stack_overflow(void) { return 0; } +static inline void print_stack_overflow(void) { } +#endif + #ifdef CONFIG_4KSTACKS /* * per-CPU IRQ handling contexts (thread information and stack) @@ -59,18 +82,12 @@ union irq_ctx { static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly; static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly; -#endif -static void stack_overflow(void) -{ - printk("low stack detected by irq handler\n"); - dump_stack(); -} - -static inline void call_on_stack2(void *func, void *stack, - unsigned long arg1, unsigned long arg2) +static inline void call_on_stack(void *func, void *stack, + unsigned long arg1, void *arg2) { unsigned long bx; + asm volatile( " xchgl %%ebx,%%esp \n" " call *%%edi \n" @@ -81,44 +98,11 @@ static inline void call_on_stack2(void *func, void *stack, : "memory", "cc", "ecx"); } -/* - * do_IRQ handles all normal device IRQ's (the special - * SMP cross-CPU interrupts have their own specific - * handlers). - */ -unsigned int do_IRQ(struct pt_regs *regs) -{ - struct pt_regs *old_regs; - /* high bit used in ret_from_ code */ - int irq = ~regs->orig_ax; - struct irq_desc *desc = irq_desc + irq; -#ifdef CONFIG_4KSTACKS +static inline int +execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) +{ union irq_ctx *curctx, *irqctx; u32 *isp; -#endif - int overflow = 0; - - if (unlikely((unsigned)irq >= NR_IRQS)) { - printk(KERN_EMERG "%s: cannot handle IRQ %d\n", - __func__, irq); - BUG(); - } - - old_regs = set_irq_regs(regs); - irq_enter(); -#ifdef CONFIG_DEBUG_STACKOVERFLOW - /* Debugging check for stack overflow: is there less than 1KB free? */ - { - long sp; - - __asm__ __volatile__("andl %%esp,%0" : - "=r" (sp) : "0" (THREAD_SIZE - 1)); - if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) - overflow = 1; - } -#endif - -#ifdef CONFIG_4KSTACKS curctx = (union irq_ctx *) current_thread_info(); irqctx = hardirq_ctx[smp_processor_id()]; @@ -129,31 +113,61 @@ unsigned int do_IRQ(struct pt_regs *regs) * handler) we can't do that and just have to keep using the * current stack (which is the irq stack already after all) */ - if (curctx != irqctx) { - /* build the stack frame on the IRQ stack */ - isp = (u32*) ((char*)irqctx + sizeof(*irqctx)); - irqctx->tinfo.task = curctx->tinfo.task; - irqctx->tinfo.previous_esp = current_stack_pointer; + if (unlikely(curctx == irqctx)) + return 0; - /* - * Copy the softirq bits in preempt_count so that the - * softirq checks work in the hardirq context. - */ - irqctx->tinfo.preempt_count = - (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) | - (curctx->tinfo.preempt_count & SOFTIRQ_MASK); + /* build the stack frame on the IRQ stack */ + isp = (u32 *) ((char*)irqctx + sizeof(*irqctx)); + irqctx->tinfo.task = curctx->tinfo.task; + irqctx->tinfo.previous_esp = current_stack_pointer; - /* Execute warning on interrupt stack */ - if (unlikely(overflow)) - call_on_stack2(stack_overflow, isp, 0, 0); + /* + * Copy the softirq bits in preempt_count so that the + * softirq checks work in the hardirq context. + */ + irqctx->tinfo.preempt_count = + (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) | + (curctx->tinfo.preempt_count & SOFTIRQ_MASK); - call_on_stack2(desc->handle_irq, isp, irq, (unsigned long)desc); - } else + if (unlikely(overflow)) + call_on_stack(print_stack_overflow, isp, 0, NULL); + + call_on_stack(desc->handle_irq, isp, irq, desc); + + return 1; +} + +#else +static inline int +execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) { return 0; } #endif - { - /* AK: Slightly bogus here */ - if (overflow) - stack_overflow(); + +/* + * do_IRQ handles all normal device IRQ's (the special + * SMP cross-CPU interrupts have their own specific + * handlers). + */ +unsigned int do_IRQ(struct pt_regs *regs) +{ + struct pt_regs *old_regs; + /* high bit used in ret_from_ code */ + int overflow, irq = ~regs->orig_ax; + struct irq_desc *desc = irq_desc + irq; + + if (unlikely((unsigned)irq >= NR_IRQS)) { + printk(KERN_EMERG "%s: cannot handle IRQ %d\n", + __func__, irq); + BUG(); + } + + old_regs = set_irq_regs(regs); + irq_enter(); + + overflow = check_stack_overflow(); + + if (!execute_on_irq_stack(overflow, desc, irq)) { + if (unlikely(overflow)) + print_stack_overflow(); desc->handle_irq(irq, desc); } From 403d8efc94cd02ae36e7db13c4edf1d06d7b7fac Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 5 May 2008 18:13:50 +0200 Subject: [PATCH 030/821] x86: irq_32 move 4kstacks code to one place Move the 4KSTACKS related code to one place. This allows to un#ifdef do_IRQ() and share the executed on stack for the stack overflow printk and the softirq call. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/irq_32.c | 191 +++++++++++++++++++-------------------- 1 file changed, 91 insertions(+), 100 deletions(-) diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c index 1c470d2e5af7..4e3e8ec60276 100644 --- a/arch/x86/kernel/irq_32.c +++ b/arch/x86/kernel/irq_32.c @@ -83,26 +83,28 @@ union irq_ctx { static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly; static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly; -static inline void call_on_stack(void *func, void *stack, - unsigned long arg1, void *arg2) -{ - unsigned long bx; +static char softirq_stack[NR_CPUS * THREAD_SIZE] + __attribute__((__section__(".bss.page_aligned"))); - asm volatile( - " xchgl %%ebx,%%esp \n" - " call *%%edi \n" - " movl %%ebx,%%esp \n" - : "=a" (arg1), "=d" (arg2), "=b" (bx) - : "0" (arg1), "1" (arg2), "2" (stack), - "D" (func) - : "memory", "cc", "ecx"); +static char hardirq_stack[NR_CPUS * THREAD_SIZE] + __attribute__((__section__(".bss.page_aligned"))); + +static void call_on_stack(void *func, void *stack) +{ + asm volatile("xchgl %%ebx,%%esp \n" + "call *%%edi \n" + "movl %%ebx,%%esp \n" + : "=b" (stack) + : "0" (stack), + "D"(func) + : "memory", "cc", "edx", "ecx", "eax"); } static inline int execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) { union irq_ctx *curctx, *irqctx; - u32 *isp; + u32 *isp, arg1, arg2; curctx = (union irq_ctx *) current_thread_info(); irqctx = hardirq_ctx[smp_processor_id()]; @@ -130,13 +132,86 @@ execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) (curctx->tinfo.preempt_count & SOFTIRQ_MASK); if (unlikely(overflow)) - call_on_stack(print_stack_overflow, isp, 0, NULL); - - call_on_stack(desc->handle_irq, isp, irq, desc); + call_on_stack(print_stack_overflow, isp); + asm volatile("xchgl %%ebx,%%esp \n" + "call *%%edi \n" + "movl %%ebx,%%esp \n" + : "=a" (arg1), "=d" (arg2), "=b" (isp) + : "0" (irq), "1" (desc), "2" (isp), + "D" (desc->handle_irq) + : "memory", "cc", "ecx"); return 1; } +/* + * allocate per-cpu stacks for hardirq and for softirq processing + */ +void __cpuinit irq_ctx_init(int cpu) +{ + union irq_ctx *irqctx; + + if (hardirq_ctx[cpu]) + return; + + irqctx = (union irq_ctx*) &hardirq_stack[cpu*THREAD_SIZE]; + irqctx->tinfo.task = NULL; + irqctx->tinfo.exec_domain = NULL; + irqctx->tinfo.cpu = cpu; + irqctx->tinfo.preempt_count = HARDIRQ_OFFSET; + irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); + + hardirq_ctx[cpu] = irqctx; + + irqctx = (union irq_ctx*) &softirq_stack[cpu*THREAD_SIZE]; + irqctx->tinfo.task = NULL; + irqctx->tinfo.exec_domain = NULL; + irqctx->tinfo.cpu = cpu; + irqctx->tinfo.preempt_count = 0; + irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); + + softirq_ctx[cpu] = irqctx; + + printk(KERN_DEBUG "CPU %u irqstacks, hard=%p soft=%p\n", + cpu,hardirq_ctx[cpu],softirq_ctx[cpu]); +} + +void irq_ctx_exit(int cpu) +{ + hardirq_ctx[cpu] = NULL; +} + +asmlinkage void do_softirq(void) +{ + unsigned long flags; + struct thread_info *curctx; + union irq_ctx *irqctx; + u32 *isp; + + if (in_interrupt()) + return; + + local_irq_save(flags); + + if (local_softirq_pending()) { + curctx = current_thread_info(); + irqctx = softirq_ctx[smp_processor_id()]; + irqctx->tinfo.task = curctx->task; + irqctx->tinfo.previous_esp = current_stack_pointer; + + /* build the stack frame on the softirq stack */ + isp = (u32*) ((char*)irqctx + sizeof(*irqctx)); + + call_on_stack(__do_softirq, isp); + /* + * Shouldnt happen, we returned above if in_interrupt(): + */ + WARN_ON_ONCE(softirq_count()); + } + + local_irq_restore(flags); +} + #else static inline int execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) { return 0; } @@ -176,90 +251,6 @@ unsigned int do_IRQ(struct pt_regs *regs) return 1; } -#ifdef CONFIG_4KSTACKS - -static char softirq_stack[NR_CPUS * THREAD_SIZE] - __attribute__((__section__(".bss.page_aligned"))); - -static char hardirq_stack[NR_CPUS * THREAD_SIZE] - __attribute__((__section__(".bss.page_aligned"))); - -/* - * allocate per-cpu stacks for hardirq and for softirq processing - */ -void irq_ctx_init(int cpu) -{ - union irq_ctx *irqctx; - - if (hardirq_ctx[cpu]) - return; - - irqctx = (union irq_ctx*) &hardirq_stack[cpu*THREAD_SIZE]; - irqctx->tinfo.task = NULL; - irqctx->tinfo.exec_domain = NULL; - irqctx->tinfo.cpu = cpu; - irqctx->tinfo.preempt_count = HARDIRQ_OFFSET; - irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); - - hardirq_ctx[cpu] = irqctx; - - irqctx = (union irq_ctx*) &softirq_stack[cpu*THREAD_SIZE]; - irqctx->tinfo.task = NULL; - irqctx->tinfo.exec_domain = NULL; - irqctx->tinfo.cpu = cpu; - irqctx->tinfo.preempt_count = 0; - irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); - - softirq_ctx[cpu] = irqctx; - - printk("CPU %u irqstacks, hard=%p soft=%p\n", - cpu,hardirq_ctx[cpu],softirq_ctx[cpu]); -} - -void irq_ctx_exit(int cpu) -{ - hardirq_ctx[cpu] = NULL; -} - -asmlinkage void do_softirq(void) -{ - unsigned long flags; - struct thread_info *curctx; - union irq_ctx *irqctx; - u32 *isp; - - if (in_interrupt()) - return; - - local_irq_save(flags); - - if (local_softirq_pending()) { - curctx = current_thread_info(); - irqctx = softirq_ctx[smp_processor_id()]; - irqctx->tinfo.task = curctx->task; - irqctx->tinfo.previous_esp = current_stack_pointer; - - /* build the stack frame on the softirq stack */ - isp = (u32*) ((char*)irqctx + sizeof(*irqctx)); - - asm volatile( - " xchgl %%ebx,%%esp \n" - " call __do_softirq \n" - " movl %%ebx,%%esp \n" - : "=b"(isp) - : "0"(isp) - : "memory", "cc", "edx", "ecx", "eax" - ); - /* - * Shouldnt happen, we returned above if in_interrupt(): - */ - WARN_ON_ONCE(softirq_count()); - } - - local_irq_restore(flags); -} -#endif - /* * Interrupt statistics: */ From 988f7b5789ccf5cfed14c72e28573a49f0cb4809 Mon Sep 17 00:00:00 2001 From: "venkatesh.pallipadi@intel.com" Date: Tue, 18 Mar 2008 17:00:22 -0700 Subject: [PATCH 031/821] x86: PAT export resource_wc in pci sysfs For the ranges with IORESOURCE_PREFETCH, export a new resource_wc interface in pci /sysfs along with resource (which is uncached). Signed-off-by: Venkatesh Pallipadi Signed-off-by: Suresh Siddha Acked-by: Jesse Barnes Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- Documentation/filesystems/sysfs-pci.txt | 1 + drivers/pci/pci-sysfs.c | 82 ++++++++++++++++++------- include/linux/pci.h | 1 + 3 files changed, 63 insertions(+), 21 deletions(-) diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt index 5daa2aaec2c5..68ef48839c04 100644 --- a/Documentation/filesystems/sysfs-pci.txt +++ b/Documentation/filesystems/sysfs-pci.txt @@ -36,6 +36,7 @@ files, each with their own function. local_cpus nearby CPU mask (cpumask, ro) resource PCI resource host addresses (ascii, ro) resource0..N PCI resource N, if present (binary, mmap) + resource0_wc..N_wc PCI WC map resource N, if prefetchable (binary, mmap) rom PCI ROM resource, if present (binary, ro) subsystem_device PCI subsystem device (ascii, ro) subsystem_vendor PCI subsystem vendor (ascii, ro) diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 271d41cc05ab..9ec7d3977a82 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -489,13 +489,14 @@ pci_mmap_legacy_mem(struct kobject *kobj, struct bin_attribute *attr, * @kobj: kobject for mapping * @attr: struct bin_attribute for the file being mapped * @vma: struct vm_area_struct passed into the mmap + * @write_combine: 1 for write_combine mapping * * Use the regular PCI mapping routines to map a PCI resource into userspace. * FIXME: write combining? maybe automatic for prefetchable regions? */ static int pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr, - struct vm_area_struct *vma) + struct vm_area_struct *vma, int write_combine) { struct pci_dev *pdev = to_pci_dev(container_of(kobj, struct device, kobj)); @@ -518,7 +519,21 @@ pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr, vma->vm_pgoff += start >> PAGE_SHIFT; mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io; - return pci_mmap_page_range(pdev, vma, mmap_type, 0); + return pci_mmap_page_range(pdev, vma, mmap_type, write_combine); +} + +static int +pci_mmap_resource_uc(struct kobject *kobj, struct bin_attribute *attr, + struct vm_area_struct *vma) +{ + return pci_mmap_resource(kobj, attr, vma, 0); +} + +static int +pci_mmap_resource_wc(struct kobject *kobj, struct bin_attribute *attr, + struct vm_area_struct *vma) +{ + return pci_mmap_resource(kobj, attr, vma, 1); } /** @@ -541,9 +556,46 @@ pci_remove_resource_files(struct pci_dev *pdev) sysfs_remove_bin_file(&pdev->dev.kobj, res_attr); kfree(res_attr); } + + res_attr = pdev->res_attr_wc[i]; + if (res_attr) { + sysfs_remove_bin_file(&pdev->dev.kobj, res_attr); + kfree(res_attr); + } } } +static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine) +{ + /* allocate attribute structure, piggyback attribute name */ + int name_len = write_combine ? 13 : 10; + struct bin_attribute *res_attr; + int retval; + + res_attr = kzalloc(sizeof(*res_attr) + name_len, GFP_ATOMIC); + if (res_attr) { + char *res_attr_name = (char *)(res_attr + 1); + + if (write_combine) { + pdev->res_attr_wc[num] = res_attr; + sprintf(res_attr_name, "resource%d_wc", num); + res_attr->mmap = pci_mmap_resource_wc; + } else { + pdev->res_attr[num] = res_attr; + sprintf(res_attr_name, "resource%d", num); + res_attr->mmap = pci_mmap_resource_uc; + } + res_attr->attr.name = res_attr_name; + res_attr->attr.mode = S_IRUSR | S_IWUSR; + res_attr->size = pci_resource_len(pdev, num); + res_attr->private = &pdev->resource[num]; + retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr); + } else + retval = -ENOMEM; + + return retval; +} + /** * pci_create_resource_files - create resource files in sysfs for @dev * @dev: dev in question @@ -557,31 +609,19 @@ static int pci_create_resource_files(struct pci_dev *pdev) /* Expose the PCI resources from this device as files */ for (i = 0; i < PCI_ROM_RESOURCE; i++) { - struct bin_attribute *res_attr; /* skip empty resources */ if (!pci_resource_len(pdev, i)) continue; - /* allocate attribute structure, piggyback attribute name */ - res_attr = kzalloc(sizeof(*res_attr) + 10, GFP_ATOMIC); - if (res_attr) { - char *res_attr_name = (char *)(res_attr + 1); + retval = pci_create_attr(pdev, i, 0); + /* for prefetchable resources, create a WC mappable file */ + if (!retval && pdev->resource[i].flags & IORESOURCE_PREFETCH) + retval = pci_create_attr(pdev, i, 1); - pdev->res_attr[i] = res_attr; - sprintf(res_attr_name, "resource%d", i); - res_attr->attr.name = res_attr_name; - res_attr->attr.mode = S_IRUSR | S_IWUSR; - res_attr->size = pci_resource_len(pdev, i); - res_attr->mmap = pci_mmap_resource; - res_attr->private = &pdev->resource[i]; - retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr); - if (retval) { - pci_remove_resource_files(pdev); - return retval; - } - } else { - return -ENOMEM; + if (retval) { + pci_remove_resource_files(pdev); + return retval; } } return 0; diff --git a/include/linux/pci.h b/include/linux/pci.h index 509159bcd4e7..d18b1dd49fab 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -206,6 +206,7 @@ struct pci_dev { struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */ int rom_attr_enabled; /* has display of the rom attribute been enabled? */ struct bin_attribute *res_attr[DEVICE_COUNT_RESOURCE]; /* sysfs file for resources */ + struct bin_attribute *res_attr_wc[DEVICE_COUNT_RESOURCE]; /* sysfs file for WC mapping of resources */ #ifdef CONFIG_PCI_MSI struct list_head msi_list; #endif From 77b52b4c5c66175553ee59eb43f74366f1e54bde Mon Sep 17 00:00:00 2001 From: Venki Pallipadi Date: Mon, 5 May 2008 19:09:10 -0700 Subject: [PATCH 032/821] x86: add "debugpat" boot option enable debug messages by a boot option "debugpat". Signed-off-by: Venkatesh Pallipadi Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/mm/pat.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-) diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index 60adbe22efa0..1a82f4db8a46 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -42,6 +42,19 @@ static int nopat(char *str) early_param("nopat", nopat); #endif + +static int debug_enable; +static int __init pat_debug_setup(char *str) +{ + debug_enable = 1; + return 0; +} +__setup("debugpat", pat_debug_setup); + +#define dprintk(fmt, arg...) \ + do { if (debug_enable) printk(KERN_INFO fmt, ##arg); } while (0) + + static u64 __read_mostly boot_pat_state; enum { @@ -279,7 +292,7 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, struct memtype *saved_ptr; if (parse->start >= end) { - pr_debug("New Entry\n"); + dprintk("New Entry\n"); list_add(&new_entry->nd, parse->nd.prev); new_entry = NULL; break; @@ -329,7 +342,7 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, break; } - pr_debug("Overlap at 0x%Lx-0x%Lx\n", + dprintk("Overlap at 0x%Lx-0x%Lx\n", saved_ptr->start, saved_ptr->end); /* No conflict. Go ahead and add this new entry */ list_add(&new_entry->nd, saved_ptr->nd.prev); @@ -381,7 +394,7 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, break; } - pr_debug(KERN_INFO "Overlap at 0x%Lx-0x%Lx\n", + dprintk("Overlap at 0x%Lx-0x%Lx\n", saved_ptr->start, saved_ptr->end); /* No conflict. Go ahead and add this new entry */ list_add(&new_entry->nd, &saved_ptr->nd); @@ -403,16 +416,16 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, if (new_entry) { /* No conflict. Not yet added to the list. Add to the tail */ list_add_tail(&new_entry->nd, &memtype_list); - pr_debug("New Entry\n"); + dprintk("New Entry\n"); } if (ret_type) { - pr_debug( + dprintk( "reserve_memtype added 0x%Lx-0x%Lx, track %s, req %s, ret %s\n", start, end, cattr_name(actual_type), cattr_name(req_type), cattr_name(*ret_type)); } else { - pr_debug( + dprintk( "reserve_memtype added 0x%Lx-0x%Lx, track %s, req %s\n", start, end, cattr_name(actual_type), cattr_name(req_type)); @@ -453,7 +466,7 @@ int free_memtype(u64 start, u64 end) current->comm, current->pid, start, end); } - pr_debug("free_memtype request 0x%Lx-0x%Lx\n", start, end); + dprintk("free_memtype request 0x%Lx-0x%Lx\n", start, end); return err; } From f8096f92b87d81c55ed63964d27baa9ce5ffe508 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 22 Apr 2008 16:27:29 +0100 Subject: [PATCH 033/821] x86: separate cmpxchg8b checking from PAE checking .. allowing the former to be use in non-PAE kernels, too. Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig.cpu | 4 ++++ include/asm-x86/required-features.h | 6 +++++- 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index 2ad6301849a1..3d22bb8175b4 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -399,6 +399,10 @@ config X86_TSC def_bool y depends on ((MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64 +config X86_CMPXCHG64 + def_bool y + depends on X86_PAE || X86_64 + # this should be set for all -march=.. options where the compiler # generates cmov. config X86_CMOV diff --git a/include/asm-x86/required-features.h b/include/asm-x86/required-features.h index 7400d3ad75c6..8c387198ca88 100644 --- a/include/asm-x86/required-features.h +++ b/include/asm-x86/required-features.h @@ -19,9 +19,13 @@ #if defined(CONFIG_X86_PAE) || defined(CONFIG_X86_64) # define NEED_PAE (1<<(X86_FEATURE_PAE & 31)) -# define NEED_CX8 (1<<(X86_FEATURE_CX8 & 31)) #else # define NEED_PAE 0 +#endif + +#ifdef CONFIG_X86_CMPXCHG64 +# define NEED_CX8 (1<<(X86_FEATURE_CX8 & 31)) +#else # define NEED_CX8 0 #endif From aa134f1b09df6beaa4d031a50d5fda1f3cebce6c Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Tue, 8 Apr 2008 10:49:03 +0200 Subject: [PATCH 034/821] x86: iommu: use symbolic constants, not hardcoded numbers Move symbolic constants into gart.h, and use them instead of hardcoded constant. Signed-off-by: Pavel Machek Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/pci-gart_64.c | 10 +++++----- drivers/char/agp/amd64-agp.c | 25 +++---------------------- include/asm-x86/gart.h | 21 +++++++++++++++++++++ 3 files changed, 29 insertions(+), 27 deletions(-) diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index c07455d1695f..bffcf455c857 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -598,13 +598,13 @@ static __init int init_k8_gatt(struct agp_kern_info *info) dev = k8_northbridges[i]; gatt_reg = __pa(gatt) >> 12; gatt_reg <<= 4; - pci_write_config_dword(dev, 0x98, gatt_reg); - pci_read_config_dword(dev, 0x90, &ctl); + pci_write_config_dword(dev, AMD64_GARTTABLEBASE, gatt_reg); + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl); - ctl |= 1; - ctl &= ~((1<<4) | (1<<5)); + ctl |= GARTEN; + ctl &= ~(DISGARTCPU | DISGARTIO); - pci_write_config_dword(dev, 0x90, ctl); + pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); } flush_gart(); diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index d8200ac8f8cb..25d64224cdbb 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -16,28 +16,9 @@ #include /* PAGE_SIZE */ #include #include +#include #include "agp.h" -/* PTE bits. */ -#define GPTE_VALID 1 -#define GPTE_COHERENT 2 - -/* Aperture control register bits. */ -#define GARTEN (1<<0) -#define DISGARTCPU (1<<4) -#define DISGARTIO (1<<5) - -/* GART cache control register bits. */ -#define INVGART (1<<0) -#define GARTPTEERR (1<<1) - -/* K8 On-cpu GART registers */ -#define AMD64_GARTAPERTURECTL 0x90 -#define AMD64_GARTAPERTUREBASE 0x94 -#define AMD64_GARTTABLEBASE 0x98 -#define AMD64_GARTCACHECTL 0x9c -#define AMD64_GARTEN (1<<0) - /* NVIDIA K8 registers */ #define NVIDIA_X86_64_0_APBASE 0x10 #define NVIDIA_X86_64_1_APBASE1 0x50 @@ -165,7 +146,7 @@ static int amd64_fetch_size(void) * In a multiprocessor x86-64 system, this function gets * called once for each CPU. */ -static u64 amd64_configure (struct pci_dev *hammer, u64 gatt_table) +static u64 amd64_configure(struct pci_dev *hammer, u64 gatt_table) { u64 aperturebase; u32 tmp; @@ -181,7 +162,7 @@ static u64 amd64_configure (struct pci_dev *hammer, u64 gatt_table) addr >>= 12; tmp = (u32) addr<<4; tmp &= ~0xf; - pci_write_config_dword (hammer, AMD64_GARTTABLEBASE, tmp); + pci_write_config_dword(hammer, AMD64_GARTTABLEBASE, tmp); /* Enable GART translation for this hammer. */ pci_read_config_dword(hammer, AMD64_GARTAPERTURECTL, &tmp); diff --git a/include/asm-x86/gart.h b/include/asm-x86/gart.h index 90958ed993fa..248e5778e928 100644 --- a/include/asm-x86/gart.h +++ b/include/asm-x86/gart.h @@ -5,6 +5,7 @@ extern void pci_iommu_shutdown(void); extern void no_iommu_init(void); extern int force_iommu, no_iommu; extern int iommu_detected; +extern int agp_amd64_init(void); #ifdef CONFIG_GART_IOMMU extern void gart_iommu_init(void); extern void gart_iommu_shutdown(void); @@ -31,4 +32,24 @@ static inline void gart_iommu_shutdown(void) #endif +/* PTE bits. */ +#define GPTE_VALID 1 +#define GPTE_COHERENT 2 + +/* Aperture control register bits. */ +#define GARTEN (1<<0) +#define DISGARTCPU (1<<4) +#define DISGARTIO (1<<5) + +/* GART cache control register bits. */ +#define INVGART (1<<0) +#define GARTPTEERR (1<<1) + +/* K8 On-cpu GART registers */ +#define AMD64_GARTAPERTURECTL 0x90 +#define AMD64_GARTAPERTUREBASE 0x94 +#define AMD64_GARTTABLEBASE 0x98 +#define AMD64_GARTCACHECTL 0x9c +#define AMD64_GARTEN (1<<0) + #endif From 1edc1ab3f68168ec6815e6d630f38948a6da005a Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 13 Apr 2008 01:11:41 -0700 Subject: [PATCH 035/821] x86: agp_gart size checking for buggy device while looking at Rafael J. Wysocki's system boot log, I found a funny printout: Node 0: aperture @ de000000 size 32 MB Aperture too small (32 MB) AGP bridge at 00:04:00 Aperture from AGP @ de000000 size 4096 MB (APSIZE 0) Aperture too small (0 MB) Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 4000000 ... agpgart: Detected AGP bridge 20 agpgart: Aperture pointing to RAM agpgart: Aperture from AGP @ de000000 size 4096 MB agpgart: Aperture too small (0 MB) agpgart: No usable aperture found. agpgart: Consider rebooting with iommu=memaper=2 to get a good aperture. it means BIOS allocated the correct gart on the NB and AGP bridge, but because a bug in the silicon (the agp bridge reports the wrong order, it wants 4G instead) the kernel will reject that allocation. Also, because the size is only 32MB, and we try to get another 64M for gart, late fix_northbridge can not revert that change because it still reads the wrong size from agp bridge. So try to double check the order value from the agp bridge, before calling aperture_valid(). [ mingo@elte.hu: 32-bit fix. ] Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/aperture_64.c | 14 ++++++++++++++ drivers/char/agp/amd64-agp.c | 11 +++++++++++ 2 files changed, 25 insertions(+) diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 479926d9e004..2e93b3132dff 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -138,6 +138,7 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) int nbits; u32 aper_low, aper_hi; u64 aper; + u32 old_order; printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", num, slot, func); apsizereg = read_pci_config_16(num, slot, func, cap + 0x14); @@ -146,6 +147,9 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) return 0; } + /* old_order could be the value from NB gart setting */ + old_order = *order; + apsize = apsizereg & 0xfff; /* Some BIOS use weird encodings not in the AGPv3 table. */ if (apsize & 0xff) @@ -159,6 +163,16 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) aper_hi = read_pci_config(num, slot, func, 0x14); aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32); + /* + * On some sick chips, APSIZE is 0. It means it wants 4G + * so let double check that order, and lets trust AMD NB settings: + */ + if (aper + (32UL<<(20 + *order)) > 0x100000000UL) { + printk(KERN_INFO "Aperture size %u MB (APSIZE %x) is not right, using settings from NB\n", + 32 << *order, apsizereg); + *order = old_order; + } + printk(KERN_INFO "Aperture from AGP @ %Lx size %u MB (APSIZE %x)\n", aper, 32 << *order, apsizereg); diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 25d64224cdbb..9e3939db76e8 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -312,6 +312,17 @@ static __devinit int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp, pci_read_config_dword(agp, 0x10, &aper_low); pci_read_config_dword(agp, 0x14, &aper_hi); aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32); + + /* + * On some sick chips APSIZE is 0. This means it wants 4G + * so let double check that order, and lets trust the AMD NB settings + */ + if (aper + (32ULL<<(20 + order)) > 0x100000000ULL) { + printk(KERN_INFO "Aperture size %u MB is not right, using settings from NB\n", + 32 << order); + order = nb_order; + } + printk(KERN_INFO PFX "Aperture from AGP @ %Lx size %u MB\n", aper, 32 << order); if (order < 0 || !aperture_valid(aper, (32*1024*1024)< Date: Sun, 13 Apr 2008 18:42:31 -0700 Subject: [PATCH 036/821] x86: checking aperture size order some systems are using 32M for gart and agp when memory is less than 4G. Kernel will reject and try to allcate another 64M that is not needed, and we will waste 64M of perfectly good RAM. this patch adds a workaround by checking aper_base/order between NB and agp bridge. If they are the same, and memory size is less than 4G, it will allow it. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/aperture_64.c | 47 ++++++++++++++++++++++++++--------- drivers/char/agp/amd64-agp.c | 12 ++++----- 2 files changed, 41 insertions(+), 18 deletions(-) diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 2e93b3132dff..8c325b7f2d9b 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -83,7 +83,7 @@ static u32 __init allocate_aperture(void) return (u32)__pa(p); } -static int __init aperture_valid(u64 aper_base, u32 aper_size) +static int __init aperture_valid(u64 aper_base, u32 aper_size, u32 min_size) { if (!aper_base) return 0; @@ -96,8 +96,9 @@ static int __init aperture_valid(u64 aper_base, u32 aper_size) printk(KERN_ERR "Aperture pointing to e820 RAM. Ignoring.\n"); return 0; } - if (aper_size < 64*1024*1024) { - printk(KERN_ERR "Aperture too small (%d MB)\n", aper_size>>20); + if (aper_size < min_size) { + printk(KERN_ERR "Aperture too small (%d MB) than (%d MB)\n", + aper_size>>20, min_size>>20); return 0; } @@ -167,7 +168,9 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) * On some sick chips, APSIZE is 0. It means it wants 4G * so let double check that order, and lets trust AMD NB settings: */ - if (aper + (32UL<<(20 + *order)) > 0x100000000UL) { + printk(KERN_INFO "Aperture from AGP @ %Lx old size %u MB\n", + aper, 32 << old_order); + if (aper + (32ULL<<(20 + *order)) > 0x100000000ULL) { printk(KERN_INFO "Aperture size %u MB (APSIZE %x) is not right, using settings from NB\n", 32 << *order, apsizereg); *order = old_order; @@ -176,7 +179,7 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) printk(KERN_INFO "Aperture from AGP @ %Lx size %u MB (APSIZE %x)\n", aper, 32 << *order, apsizereg); - if (!aperture_valid(aper, (32*1024*1024) << *order)) + if (!aperture_valid(aper, (32*1024*1024) << *order, 32<<20)) return 0; return (u32)aper; } @@ -302,8 +305,8 @@ void __init early_gart_iommu_check(void) fix = 1; if (gart_fix_e820 && !fix && aper_enabled) { - if (e820_any_mapped(aper_base, aper_base + aper_size, - E820_RAM)) { + if (!e820_all_mapped(aper_base, aper_base + aper_size, + E820_RESERVED)) { /* reserved it, so we can resuse it in second kernel */ printk(KERN_INFO "update e820 for GART\n"); add_memory_region(aper_base, aper_size, E820_RESERVED); @@ -324,8 +327,11 @@ void __init early_gart_iommu_check(void) } +static int __initdata printed_gart_size_msg; + void __init gart_iommu_hole_init(void) { + u32 agp_aper_base = 0, agp_aper_order = 0; u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0; u64 aper_base, last_aper_base = 0; int fix, num, valid_agp = 0; @@ -337,6 +343,9 @@ void __init gart_iommu_hole_init(void) printk(KERN_INFO "Checking aperture...\n"); + if (!fallback_aper_force) + agp_aper_base = search_agp_bridge(&agp_aper_order, &valid_agp); + fix = 0; node = 0; for (num = 24; num < 32; num++) { @@ -355,9 +364,21 @@ void __init gart_iommu_hole_init(void) node, aper_base, aper_size >> 20); node++; - if (!aperture_valid(aper_base, aper_size)) { - fix = 1; - break; + if (!aperture_valid(aper_base, aper_size, 64<<20)) { + if (valid_agp && agp_aper_base && + agp_aper_base == aper_base && + agp_aper_order == aper_order) { + /* the same between two setting from NB and agp */ + if (!no_iommu && end_pfn > MAX_DMA32_PFN && !printed_gart_size_msg) { + printk(KERN_ERR "you are using iommu with agp, but GART size is less than 64M\n"); + printk(KERN_ERR "please increase GART size in your BIOS setup\n"); + printk(KERN_ERR "if BIOS doesn't have that option, contact your HW vendor!\n"); + printed_gart_size_msg = 1; + } + } else { + fix = 1; + break; + } } if ((last_aper_order && aper_order != last_aper_order) || @@ -378,8 +399,10 @@ void __init gart_iommu_hole_init(void) return; } - if (!fallback_aper_force) - aper_alloc = search_agp_bridge(&aper_order, &valid_agp); + if (!fallback_aper_force) { + aper_alloc = agp_aper_base; + aper_order = agp_aper_order; + } if (aper_alloc) { /* Got the aperture from the AGP bridge */ diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 9e3939db76e8..9c24470a8252 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -245,11 +245,7 @@ static int __devinit aperture_valid(u64 aper, u32 size) printk(KERN_ERR PFX "No aperture\n"); return 0; } - if (size < 32*1024*1024) { - printk(KERN_ERR PFX "Aperture too small (%d MB)\n", size>>20); - return 0; - } - if ((u64)aper + size > 0x100000000ULL) { + if ((u64)aper + size > 0x100000000ULL) { printk(KERN_ERR PFX "Aperture out of bounds\n"); return 0; } @@ -257,6 +253,10 @@ static int __devinit aperture_valid(u64 aper, u32 size) printk(KERN_ERR PFX "Aperture pointing to RAM\n"); return 0; } + if (size < 32*1024*1024) { + printk(KERN_ERR PFX "Aperture too small (%d MB)\n", size>>20); + return 0; + } /* Request the Aperture. This catches cases when someone else already put a mapping in there - happens with some very broken BIOS @@ -317,7 +317,7 @@ static __devinit int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp, * On some sick chips APSIZE is 0. This means it wants 4G * so let double check that order, and lets trust the AMD NB settings */ - if (aper + (32ULL<<(20 + order)) > 0x100000000ULL) { + if (order >=0 && aper + (32ULL<<(20 + order)) > 0x100000000ULL) { printk(KERN_INFO "Aperture size %u MB is not right, using settings from NB\n", 32 << order); order = nb_order; From 7677b2ef6c0c4fddc84f6473f3863f40eb71821b Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 14 Apr 2008 20:40:37 -0700 Subject: [PATCH 037/821] x86_64: allocate gart aperture from 512M because we try to reserve dma32 early, so we have chance to get aperture from 64M. with some sequence aperture allocated from RAM, could become E820_RESERVED. and then if doing a kexec with a big kernel that uncompressed size is above 64M we could have a range conflict with still using gart. So allocate gart aperture from 512M instead. Also change the fallback_aper_order to 5, because we don't have chance to get 2G or 4G aperture. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/aperture_64.c | 20 +++++++++++++++++--- arch/x86/kernel/pci-dma.c | 6 +++++- 2 files changed, 22 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 8c325b7f2d9b..c63f8d9fad3e 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -55,8 +55,9 @@ static u32 __init allocate_aperture(void) u32 aper_size; void *p; - if (fallback_aper_order > 7) - fallback_aper_order = 7; + /* aper_size should <= 1G */ + if (fallback_aper_order > 5) + fallback_aper_order = 5; aper_size = (32 * 1024 * 1024) << fallback_aper_order; /* @@ -65,7 +66,20 @@ static u32 __init allocate_aperture(void) * memory. Unfortunately we cannot move it up because that would * make the IOMMU useless. */ - p = __alloc_bootmem_nopanic(aper_size, aper_size, 0); + /* + * using 512M as goal, in case kexec will load kernel_big + * that will do the on position decompress, and could overlap with + * that positon with gart that is used. + * sequende: + * kernel_small + * ==> kexec (with kdump trigger path or previous doesn't shutdown gart) + * ==> kernel_small(gart area become e820_reserved) + * ==> kexec (with kdump trigger path or previous doesn't shutdown gart) + * ==> kerne_big (uncompressed size will be big than 64M or 128M) + * so don't use 512M below as gart iommu, leave the space for kernel + * code for safe + */ + p = __alloc_bootmem_nopanic(aper_size, aper_size, 512ULL<<20); if (!p || __pa(p)+aper_size > 0xffffffff) { printk(KERN_ERR "Cannot allocate aperture memory hole (%p,%uK)\n", diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 0c37f16b6950..1a017f00e867 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -77,10 +77,14 @@ void __init dma32_reserve_bootmem(void) if (end_pfn <= MAX_DMA32_PFN) return; + /* + * check aperture_64.c allocate_aperture() for reason about + * using 512M as goal + */ align = 64ULL<<20; size = round_up(dma32_bootmem_size, align); dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align, - __pa(MAX_DMA_ADDRESS)); + 512ULL<<20); if (dma32_bootmem_ptr) dma32_bootmem_size = size; else From 55c0d721df80dcc505dc888e85d4ca51ea150ce9 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 19 Apr 2008 01:31:11 -0700 Subject: [PATCH 038/821] x86: clean up aperture_64.c 1. use symbolic register names where appropriate. 2. num to bus or slot changing 3. handle for new opteron for bus other than 0 Signed-off-by: Yinghai Lu Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/aperture_64.c | 216 +++++++++++++++++++++------------- 1 file changed, 132 insertions(+), 84 deletions(-) diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index c63f8d9fad3e..02f4dbaa4df4 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -35,6 +35,18 @@ int fallback_aper_force __initdata; int fix_aperture __initdata = 1; +struct bus_dev_range { + int bus; + int dev_base; + int dev_limit; +}; + +static struct bus_dev_range bus_dev_ranges[] __initdata = { + { 0x00, 0x18, 0x20}, + { 0xff, 0x00, 0x20}, + { 0xfe, 0x00, 0x20} +}; + static struct resource gart_resource = { .name = "GART", .flags = IORESOURCE_MEM, @@ -120,33 +132,33 @@ static int __init aperture_valid(u64 aper_base, u32 aper_size, u32 min_size) } /* Find a PCI capability */ -static __u32 __init find_cap(int num, int slot, int func, int cap) +static __u32 __init find_cap(int bus, int slot, int func, int cap) { int bytes; u8 pos; - if (!(read_pci_config_16(num, slot, func, PCI_STATUS) & + if (!(read_pci_config_16(bus, slot, func, PCI_STATUS) & PCI_STATUS_CAP_LIST)) return 0; - pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST); + pos = read_pci_config_byte(bus, slot, func, PCI_CAPABILITY_LIST); for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) { u8 id; pos &= ~3; - id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID); + id = read_pci_config_byte(bus, slot, func, pos+PCI_CAP_LIST_ID); if (id == 0xff) break; if (id == cap) return pos; - pos = read_pci_config_byte(num, slot, func, + pos = read_pci_config_byte(bus, slot, func, pos+PCI_CAP_LIST_NEXT); } return 0; } /* Read a standard AGPv3 bridge header */ -static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) +static __u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order) { u32 apsize; u32 apsizereg; @@ -155,8 +167,8 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) u64 aper; u32 old_order; - printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", num, slot, func); - apsizereg = read_pci_config_16(num, slot, func, cap + 0x14); + printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", bus, slot, func); + apsizereg = read_pci_config_16(bus, slot, func, cap + 0x14); if (apsizereg == 0xffffffff) { printk(KERN_ERR "APSIZE in AGP bridge unreadable\n"); return 0; @@ -174,8 +186,8 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) if ((int)*order < 0) /* < 32MB */ *order = 0; - aper_low = read_pci_config(num, slot, func, 0x10); - aper_hi = read_pci_config(num, slot, func, 0x14); + aper_low = read_pci_config(bus, slot, func, 0x10); + aper_hi = read_pci_config(bus, slot, func, 0x14); aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32); /* @@ -213,15 +225,15 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) */ static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) { - int num, slot, func; + int bus, slot, func; /* Poor man's PCI discovery */ - for (num = 0; num < 256; num++) { + for (bus = 0; bus < 256; bus++) { for (slot = 0; slot < 32; slot++) { for (func = 0; func < 8; func++) { u32 class, cap; u8 type; - class = read_pci_config(num, slot, func, + class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION); if (class == 0xffffffff) break; @@ -230,17 +242,17 @@ static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) case PCI_CLASS_BRIDGE_HOST: case PCI_CLASS_BRIDGE_OTHER: /* needed? */ /* AGP bridge? */ - cap = find_cap(num, slot, func, + cap = find_cap(bus, slot, func, PCI_CAP_ID_AGP); if (!cap) break; *valid_agp = 1; - return read_agp(num, slot, func, cap, + return read_agp(bus, slot, func, cap, order); } /* No multi-function device? */ - type = read_pci_config_byte(num, slot, func, + type = read_pci_config_byte(bus, slot, func, PCI_HEADER_TYPE); if (!(type & 0x80)) break; @@ -280,38 +292,49 @@ void __init early_gart_iommu_check(void) * or BIOS forget to put that in reserved. * try to update e820 to make that region as reserved. */ - int fix, num; + int fix, slot; u32 ctl; u32 aper_size = 0, aper_order = 0, last_aper_order = 0; u64 aper_base = 0, last_aper_base = 0; int aper_enabled = 0, last_aper_enabled = 0; + int i; if (!early_pci_allowed()) return; fix = 0; - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; - ctl = read_pci_config(0, num, 3, 0x90); - aper_enabled = ctl & 1; - aper_order = (ctl >> 1) & 7; - aper_size = (32 * 1024 * 1024) << aper_order; - aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff; - aper_base <<= 25; + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; - if ((last_aper_order && aper_order != last_aper_order) || - (last_aper_base && aper_base != last_aper_base) || - (last_aper_enabled && aper_enabled != last_aper_enabled)) { - fix = 1; - break; + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; + + ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL); + aper_enabled = ctl & AMD64_GARTEN; + aper_order = (ctl >> 1) & 7; + aper_size = (32 * 1024 * 1024) << aper_order; + aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff; + aper_base <<= 25; + + if ((last_aper_order && aper_order != last_aper_order) || + (last_aper_base && aper_base != last_aper_base) || + (last_aper_enabled && aper_enabled != last_aper_enabled)) { + fix = 1; + goto out; + } + last_aper_order = aper_order; + last_aper_base = aper_base; + last_aper_enabled = aper_enabled; } - last_aper_order = aper_order; - last_aper_base = aper_base; - last_aper_enabled = aper_enabled; } +out: if (!fix && !aper_enabled) return; @@ -330,13 +353,22 @@ void __init early_gart_iommu_check(void) } /* different nodes have different setting, disable them all at first*/ - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; - ctl = read_pci_config(0, num, 3, 0x90); - ctl &= ~1; - write_pci_config(0, num, 3, 0x90, ctl); + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; + + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; + + ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL); + ctl &= ~AMD64_GARTEN; + write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, ctl); + } } } @@ -348,8 +380,8 @@ void __init gart_iommu_hole_init(void) u32 agp_aper_base = 0, agp_aper_order = 0; u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0; u64 aper_base, last_aper_base = 0; - int fix, num, valid_agp = 0; - int node; + int fix, slot, valid_agp = 0; + int i, node; if (gart_iommu_aperture_disabled || !fix_aperture || !early_pci_allowed()) @@ -362,48 +394,58 @@ void __init gart_iommu_hole_init(void) fix = 0; node = 0; - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; - iommu_detected = 1; - gart_iommu_aperture = 1; + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; - aper_order = (read_pci_config(0, num, 3, 0x90) >> 1) & 7; - aper_size = (32 * 1024 * 1024) << aper_order; - aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff; - aper_base <<= 25; + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; - printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n", - node, aper_base, aper_size >> 20); - node++; + iommu_detected = 1; + gart_iommu_aperture = 1; - if (!aperture_valid(aper_base, aper_size, 64<<20)) { - if (valid_agp && agp_aper_base && - agp_aper_base == aper_base && - agp_aper_order == aper_order) { - /* the same between two setting from NB and agp */ - if (!no_iommu && end_pfn > MAX_DMA32_PFN && !printed_gart_size_msg) { - printk(KERN_ERR "you are using iommu with agp, but GART size is less than 64M\n"); - printk(KERN_ERR "please increase GART size in your BIOS setup\n"); - printk(KERN_ERR "if BIOS doesn't have that option, contact your HW vendor!\n"); - printed_gart_size_msg = 1; + aper_order = (read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL) >> 1) & 7; + aper_size = (32 * 1024 * 1024) << aper_order; + aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff; + aper_base <<= 25; + + printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n", + node, aper_base, aper_size >> 20); + node++; + + if (!aperture_valid(aper_base, aper_size, 64<<20)) { + if (valid_agp && agp_aper_base && + agp_aper_base == aper_base && + agp_aper_order == aper_order) { + /* the same between two setting from NB and agp */ + if (!no_iommu && end_pfn > MAX_DMA32_PFN && !printed_gart_size_msg) { + printk(KERN_ERR "you are using iommu with agp, but GART size is less than 64M\n"); + printk(KERN_ERR "please increase GART size in your BIOS setup\n"); + printk(KERN_ERR "if BIOS doesn't have that option, contact your HW vendor!\n"); + printed_gart_size_msg = 1; + } + } else { + fix = 1; + goto out; } - } else { - fix = 1; - break; } - } - if ((last_aper_order && aper_order != last_aper_order) || - (last_aper_base && aper_base != last_aper_base)) { - fix = 1; - break; + if ((last_aper_order && aper_order != last_aper_order) || + (last_aper_base && aper_base != last_aper_base)) { + fix = 1; + goto out; + } + last_aper_order = aper_order; + last_aper_base = aper_base; } - last_aper_order = aper_order; - last_aper_base = aper_base; } +out: if (!fix && !fallback_aper_force) { if (last_aper_base) { unsigned long n = (32 * 1024 * 1024) << last_aper_order; @@ -452,16 +494,22 @@ void __init gart_iommu_hole_init(void) } /* Fix up the north bridges */ - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; - /* - * Don't enable translation yet. That is done later. - * Assume this BIOS didn't initialise the GART so - * just overwrite all previous bits - */ - write_pci_config(0, num, 3, 0x90, aper_order<<1); - write_pci_config(0, num, 3, 0x94, aper_alloc>>25); + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; + + /* Don't enable translation yet. That is done later. + Assume this BIOS didn't initialise the GART so + just overwrite all previous bits */ + write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, aper_order << 1); + write_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE, aper_alloc >> 25); + } } } From 330fce23dab6e6a3d1979e55f27aba4c0c301331 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 19 Apr 2008 01:31:45 -0700 Subject: [PATCH 039/821] x86: reserve dma32 early for gart fix we can use free_bootmem() directly. Signed-off-by: Yinghai Lu Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/pci-dma.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 1a017f00e867..81862d0c7a9a 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -92,7 +92,6 @@ void __init dma32_reserve_bootmem(void) } static void __init dma32_free_bootmem(void) { - int node; if (end_pfn <= MAX_DMA32_PFN) return; @@ -100,9 +99,7 @@ static void __init dma32_free_bootmem(void) if (!dma32_bootmem_ptr) return; - for_each_online_node(node) - free_bootmem_node(NODE_DATA(node), __pa(dma32_bootmem_ptr), - dma32_bootmem_size); + free_bootmem(__pa(dma32_bootmem_ptr), dma32_bootmem_size); dma32_bootmem_ptr = NULL; dma32_bootmem_size = 0; From 3bb6fbf9969a8bbe4892968659239273d092e78a Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Tue, 15 Apr 2008 12:43:57 +0200 Subject: [PATCH 040/821] x86 gart: factor out common code Cleanup gart handling on amd64 a bit: move common code into enable_gart_translation , and use symbolic register names where appropriate. Signed-off-by: Pavel Machek Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/pci-gart_64.c | 23 ++++++----------------- drivers/char/agp/amd64-agp.c | 29 +++++++++-------------------- include/asm-x86/gart.h | 17 +++++++++++++++++ 3 files changed, 32 insertions(+), 37 deletions(-) diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index bffcf455c857..1f99b62ff616 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -533,8 +533,8 @@ static __init unsigned read_aperture(struct pci_dev *dev, u32 *size) unsigned aper_size = 0, aper_base_32, aper_order; u64 aper_base; - pci_read_config_dword(dev, 0x94, &aper_base_32); - pci_read_config_dword(dev, 0x90, &aper_order); + pci_read_config_dword(dev, AMD64_GARTAPERTUREBASE, &aper_base_32); + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &aper_order); aper_order = (aper_order >> 1) & 7; aper_base = aper_base_32 & 0x7fff; @@ -592,19 +592,8 @@ static __init int init_k8_gatt(struct agp_kern_info *info) agp_gatt_table = gatt; for (i = 0; i < num_k8_northbridges; i++) { - u32 gatt_reg; - u32 ctl; - dev = k8_northbridges[i]; - gatt_reg = __pa(gatt) >> 12; - gatt_reg <<= 4; - pci_write_config_dword(dev, AMD64_GARTTABLEBASE, gatt_reg); - pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl); - - ctl |= GARTEN; - ctl &= ~(DISGARTCPU | DISGARTIO); - - pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); + enable_gart_translation(dev, __pa(gatt)); } flush_gart(); @@ -648,11 +637,11 @@ void gart_iommu_shutdown(void) u32 ctl; dev = k8_northbridges[i]; - pci_read_config_dword(dev, 0x90, &ctl); + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl); - ctl &= ~1; + ctl &= ~GARTEN; - pci_write_config_dword(dev, 0x90, ctl); + pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); } } diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 9c24470a8252..e3c7ea07f57c 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -150,25 +150,14 @@ static u64 amd64_configure(struct pci_dev *hammer, u64 gatt_table) { u64 aperturebase; u32 tmp; - u64 addr, aper_base; + u64 aper_base; /* Address to map to */ - pci_read_config_dword (hammer, AMD64_GARTAPERTUREBASE, &tmp); + pci_read_config_dword(hammer, AMD64_GARTAPERTUREBASE, &tmp); aperturebase = tmp << 25; aper_base = (aperturebase & PCI_BASE_ADDRESS_MEM_MASK); - /* address of the mappings table */ - addr = (u64) gatt_table; - addr >>= 12; - tmp = (u32) addr<<4; - tmp &= ~0xf; - pci_write_config_dword(hammer, AMD64_GARTTABLEBASE, tmp); - - /* Enable GART translation for this hammer. */ - pci_read_config_dword(hammer, AMD64_GARTAPERTURECTL, &tmp); - tmp |= GARTEN; - tmp &= ~(DISGARTCPU | DISGARTIO); - pci_write_config_dword(hammer, AMD64_GARTAPERTURECTL, tmp); + enable_gart_translation(hammer, gatt_table); return aper_base; } @@ -207,9 +196,9 @@ static void amd64_cleanup(void) for (i = 0; i < num_k8_northbridges; i++) { struct pci_dev *dev = k8_northbridges[i]; /* disable gart translation */ - pci_read_config_dword (dev, AMD64_GARTAPERTURECTL, &tmp); + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &tmp); tmp &= ~AMD64_GARTEN; - pci_write_config_dword (dev, AMD64_GARTAPERTURECTL, tmp); + pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, tmp); } } @@ -289,9 +278,9 @@ static __devinit int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp, u32 nb_order, nb_base; u16 apsize; - pci_read_config_dword(nb, 0x90, &nb_order); + pci_read_config_dword(nb, AMD64_GARTAPERTURECTL, &nb_order); nb_order = (nb_order >> 1) & 7; - pci_read_config_dword(nb, 0x94, &nb_base); + pci_read_config_dword(nb, AMD64_GARTAPERTUREBASE, &nb_base); nb_aper = nb_base << 25; if (aperture_valid(nb_aper, (32*1024*1024)<> 25); + pci_write_config_dword(nb, AMD64_GARTAPERTURECTL, order << 1); + pci_write_config_dword(nb, AMD64_GARTAPERTUREBASE, aper >> 25); return 0; } diff --git a/include/asm-x86/gart.h b/include/asm-x86/gart.h index 248e5778e928..6f22786d2f0c 100644 --- a/include/asm-x86/gart.h +++ b/include/asm-x86/gart.h @@ -52,4 +52,21 @@ static inline void gart_iommu_shutdown(void) #define AMD64_GARTCACHECTL 0x9c #define AMD64_GARTEN (1<<0) +static inline void enable_gart_translation(struct pci_dev *dev, u64 addr) +{ + u32 tmp, ctl; + + /* address of the mappings table */ + addr >>= 12; + tmp = (u32) addr<<4; + tmp &= ~0xf; + pci_write_config_dword(dev, AMD64_GARTTABLEBASE, tmp); + + /* Enable GART translation for this hammer. */ + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl); + ctl |= GARTEN; + ctl &= ~(DISGARTCPU | DISGARTIO); + pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); +} + #endif From f784946ded3e734524d1f48a6a8286b8a152c3b9 Mon Sep 17 00:00:00 2001 From: Hiroshi Shimamoto Date: Fri, 2 May 2008 16:45:08 -0700 Subject: [PATCH 041/821] x86: use per_cpu data in nmi_32 use per_cpu for per CPU data. Signed-off-by: Hiroshi Shimamoto Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/nmi_32.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index 11b14bbaa61e..69bdae555c18 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -293,9 +293,9 @@ void stop_apic_nmi_watchdog(void *unused) * here too!] */ -static unsigned int - last_irq_sums [NR_CPUS], - alert_counter [NR_CPUS]; +static DEFINE_PER_CPU(unsigned, last_irq_sum); +static DEFINE_PER_CPU(local_t, alert_counter); +static DEFINE_PER_CPU(int, nmi_touch); void touch_nmi_watchdog(void) { @@ -303,12 +303,13 @@ void touch_nmi_watchdog(void) unsigned cpu; /* - * Just reset the alert counters, (other CPUs might be - * spinning on locks we hold): + * Tell other CPUs to reset their alert counters. We cannot + * do it ourselves because the alert count increase is not + * atomic. */ for_each_present_cpu(cpu) { - if (alert_counter[cpu]) - alert_counter[cpu] = 0; + if (per_cpu(nmi_touch, cpu) != 1) + per_cpu(nmi_touch, cpu) = 1; } } @@ -358,22 +359,26 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) */ sum = per_cpu(irq_stat, cpu).apic_timer_irqs + per_cpu(irq_stat, cpu).irq0_irqs; + if (__get_cpu_var(nmi_touch)) { + __get_cpu_var(nmi_touch) = 0; + touched = 1; + } /* if the none of the timers isn't firing, this cpu isn't doing much */ - if (!touched && last_irq_sums[cpu] == sum) { + if (!touched && __get_cpu_var(last_irq_sum) == sum) { /* * Ayiee, looks like this CPU is stuck ... * wait a few IRQs (5 seconds) before doing the oops ... */ - alert_counter[cpu]++; - if (alert_counter[cpu] == 5*nmi_hz) + local_inc(&__get_cpu_var(alert_counter)); + if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) /* * die_nmi will return ONLY if NOTIFY_STOP happens.. */ die_nmi(regs, "BUG: NMI Watchdog detected LOCKUP"); } else { - last_irq_sums[cpu] = sum; - alert_counter[cpu] = 0; + __get_cpu_var(last_irq_sum) = sum; + local_set(&__get_cpu_var(alert_counter), 0); } /* see if the nmi watchdog went off */ if (!__get_cpu_var(wd_enabled)) From f59a9310b97879159ef4d25227bc270278f1ee71 Mon Sep 17 00:00:00 2001 From: Hiroshi Shimamoto Date: Fri, 2 May 2008 16:44:52 -0700 Subject: [PATCH 042/821] x86: nmi and irq counters are unsigned in nmi_64.c __nmi_count, apic_timer_irqs and irq0_irqs are unsigned. Signed-off-by: Hiroshi Shimamoto Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/nmi_64.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index 5a29ded994fa..33cb8ecbb6dd 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -79,7 +79,7 @@ static __init void nmi_cpu_busy(void *data) int __init check_nmi_watchdog(void) { - int *prev_nmi_count; + unsigned int *prev_nmi_count; int cpu; if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED)) @@ -316,7 +316,7 @@ EXPORT_SYMBOL(touch_nmi_watchdog); notrace __kprobes int nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) { - int sum; + unsigned int sum; int touched = 0; int cpu = smp_processor_id(); int rc = 0; From 622e3f28e50fe30cc199c735440cd7c75e0033b0 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sun, 4 May 2008 19:57:19 +0400 Subject: [PATCH 043/821] x86: 64-bit defconfig remake The current x86_64_defconfig contains a number of nonexistent symbols. Lets fix it. Signed-off-by: Cyrill Gorcunov Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/configs/x86_64_defconfig | 631 ++++++++++++++++-------------- 1 file changed, 330 insertions(+), 301 deletions(-) diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index 2d6f5b2809d2..2f1b35664998 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -1,48 +1,65 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-git14 -# Fri Jul 20 09:53:15 2007 +# Linux kernel version: 2.6.26-rc1 +# Sun May 4 19:27:29 2008 # -CONFIG_X86_64=y CONFIG_64BIT=y +# CONFIG_X86_32 is not set +CONFIG_X86_64=y CONFIG_X86=y +CONFIG_DEFCONFIG_LIST="arch/x86/configs/x86_64_defconfig" +# CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_ZONE_DMA32=y +CONFIG_CLOCKSOURCE_WATCHDOG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y -CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y -CONFIG_QUICKLIST=y -CONFIG_NR_QUICK=2 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_X86_CMPXCHG=y -CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_DMI=y -CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_HWEIGHT=y +# CONFIG_GENERIC_GPIO is not set +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_ARCH_HAS_CPU_RELAX=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ZONE_DMA32=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_AUDIT_ARCH=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_X86_SMP=y +CONFIG_X86_64_SMP=y +CONFIG_X86_HT=y +CONFIG_X86_BIOS_REBOOT=y +CONFIG_X86_TRAMPOLINE=y +# CONFIG_KTIME_SCALAR is not set # # General setup # +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y @@ -51,14 +68,21 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=18 -# CONFIG_CPUSETS is not set -CONFIG_SYSFS_DEPRECATED=y +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_USER_SCHED is not set +# CONFIG_CGROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +# CONFIG_USER_NS is not set +CONFIG_PID_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -66,6 +90,7 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -73,6 +98,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -85,6 +111,17 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -98,6 +135,7 @@ CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set +CONFIG_BLOCK_COMPAT=y # # IO Schedulers @@ -111,107 +149,169 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y # # Processor type and features # +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_SMP=y CONFIG_X86_PC=y +# CONFIG_X86_ELAN is not set +# CONFIG_X86_VOYAGER is not set +# CONFIG_X86_NUMAQ is not set +# CONFIG_X86_SUMMIT is not set +# CONFIG_X86_BIGSMP is not set +# CONFIG_X86_VISWS is not set +# CONFIG_X86_GENERICARCH is not set +# CONFIG_X86_ES7000 is not set +# CONFIG_X86_RDC321X is not set # CONFIG_X86_VSMP is not set +# CONFIG_PARAVIRT_GUEST is not set +# CONFIG_MEMTEST_BOOTPARAM is not set +# CONFIG_M386 is not set +# CONFIG_M486 is not set +# CONFIG_M586 is not set +# CONFIG_M586TSC is not set +# CONFIG_M586MMX is not set +# CONFIG_M686 is not set +# CONFIG_MPENTIUMII is not set +# CONFIG_MPENTIUMIII is not set +# CONFIG_MPENTIUMM is not set +# CONFIG_MPENTIUM4 is not set +# CONFIG_MK6 is not set +# CONFIG_MK7 is not set # CONFIG_MK8 is not set +# CONFIG_MCRUSOE is not set +# CONFIG_MEFFICEON is not set +# CONFIG_MWINCHIPC6 is not set +# CONFIG_MWINCHIP2 is not set +# CONFIG_MWINCHIP3D is not set +# CONFIG_MGEODEGX1 is not set +# CONFIG_MGEODE_LX is not set +# CONFIG_MCYRIXIII is not set +# CONFIG_MVIAC3_2 is not set +# CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set CONFIG_GENERIC_CPU=y +CONFIG_X86_CPU=y CONFIG_X86_L1_CACHE_BYTES=128 -CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_INTERNODE_CACHE_BYTES=128 -CONFIG_X86_TSC=y +CONFIG_X86_CMPXCHG=y +CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_GOOD_APIC=y -# CONFIG_MICROCODE is not set -CONFIG_X86_MSR=y -CONFIG_X86_CPUID=y -CONFIG_X86_HT=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_MTRR=y -CONFIG_SMP=y +CONFIG_X86_TSC=y +CONFIG_X86_CMOV=y +CONFIG_X86_MINIMUM_CPU_FAMILY=64 +CONFIG_X86_DEBUGCTLMSR=y +CONFIG_HPET_TIMER=y +CONFIG_HPET_EMULATE_RTC=y +CONFIG_DMI=y +CONFIG_GART_IOMMU=y +# CONFIG_CALGARY_IOMMU is not set +CONFIG_SWIOTLB=y +CONFIG_IOMMU_HELPER=y +CONFIG_NR_CPUS=32 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y +CONFIG_X86_LOCAL_APIC=y +CONFIG_X86_IO_APIC=y +CONFIG_X86_MCE=y +CONFIG_X86_MCE_INTEL=y +CONFIG_X86_MCE_AMD=y +# CONFIG_I8K is not set +# CONFIG_MICROCODE is not set +CONFIG_X86_MSR=y +CONFIG_X86_CPUID=y CONFIG_NUMA=y CONFIG_K8_NUMA=y -CONFIG_NODES_SHIFT=6 CONFIG_X86_64_ACPI_NUMA=y +CONFIG_NODES_SPAN_OTHER_NODES=y CONFIG_NUMA_EMU=y +CONFIG_NODES_SHIFT=6 +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +# CONFIG_SPARSEMEM_VMEMMAP is not set + +# +# Memory hotplug is currently incompatible with Software Suspend +# +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y -CONFIG_OUT_OF_LINE_PFN_TO_PAGE=y -CONFIG_NR_CPUS=32 -CONFIG_PHYSICAL_ALIGN=0x200000 -CONFIG_HOTPLUG_CPU=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_HPET_TIMER=y -CONFIG_HPET_EMULATE_RTC=y -CONFIG_GART_IOMMU=y -# CONFIG_CALGARY_IOMMU is not set -CONFIG_SWIOTLB=y -CONFIG_X86_MCE=y -CONFIG_X86_MCE_INTEL=y -CONFIG_X86_MCE_AMD=y -# CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set -# CONFIG_RELOCATABLE is not set -CONFIG_PHYSICAL_START=0x200000 +CONFIG_MTRR=y +# CONFIG_X86_PAT is not set +# CONFIG_EFI is not set CONFIG_SECCOMP=y -# CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -CONFIG_K8_NB=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_ISA_DMA_API=y -CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_SCHED_HRTICK=y +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_PHYSICAL_START=0x200000 +# CONFIG_RELOCATABLE is not set +CONFIG_PHYSICAL_ALIGN=0x200000 +CONFIG_HOTPLUG_CPU=y +# CONFIG_COMPAT_VDSO is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y # # Power management options # +CONFIG_ARCH_HIBERNATION_HEADER=y CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP_SMP=y +CONFIG_PM_SLEEP=y +# CONFIG_SUSPEND is not set CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" - -# -# ACPI (Advanced Configuration and Power Interface) Support -# CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SLEEP_PROC_FS=y -CONFIG_ACPI_SLEEP_PROC_SLEEP=y CONFIG_ACPI_PROCFS=y +CONFIG_ACPI_PROCFS_POWER=y +CONFIG_ACPI_SYSFS_POWER=y +CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y -# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_DOCK=y +# CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_NUMA=y +# CONFIG_ACPI_WMI is not set # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set +# CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y @@ -230,7 +330,10 @@ CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y @@ -240,16 +343,19 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y # # CPUFreq processor drivers # +CONFIG_X86_ACPI_CPUFREQ=y CONFIG_X86_POWERNOW_K8=y CONFIG_X86_POWERNOW_K8_ACPI=y # CONFIG_X86_SPEEDSTEP_CENTRINO is not set -CONFIG_X86_ACPI_CPUFREQ=y +CONFIG_X86_P4_CLOCKMOD=y # # shared options # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y -# CONFIG_X86_SPEEDSTEP_LIB is not set +CONFIG_X86_SPEEDSTEP_LIB=y +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y # # Bus options (PCI etc.) @@ -257,16 +363,18 @@ CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y +CONFIG_PCI_DOMAINS=y +# CONFIG_DMAR is not set CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_HT_IRQ is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_ISA_DMA_API=y +CONFIG_K8_NB=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -274,10 +382,12 @@ CONFIG_PCI_MSI=y # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_IA32_EMULATION=y CONFIG_IA32_AOUT=y CONFIG_COMPAT=y +CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y # @@ -313,6 +423,7 @@ CONFIG_INET_TUNNEL=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -334,8 +445,10 @@ CONFIG_IPV6=y # CONFIG_INET6_XFRM_MODE_BEET is not set # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -352,10 +465,6 @@ CONFIG_IPV6_SIT=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -364,6 +473,7 @@ CONFIG_IPV6_SIT=y # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -385,6 +495,7 @@ CONFIG_IPV6_SIT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -416,7 +527,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -427,17 +538,20 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set +# CONFIG_INTEL_MENLOW is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set -# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set @@ -449,18 +563,21 @@ CONFIG_IDE_PROC_FS=y # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_IDEPNP is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=y @@ -487,9 +604,8 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -528,105 +644,16 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set -CONFIG_SCSI_SAS_ATTRS=y # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -CONFIG_SCSI_AIC79XX=y -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=4000 -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y +# CONFIG_SATA_PMP is not set CONFIG_SATA_AHCI=y -CONFIG_SATA_SVW=y -CONFIG_ATA_PIIX=y -# CONFIG_SATA_MV is not set -CONFIG_SATA_NV=y -# CONFIG_PDC_ADMA is not set -# CONFIG_SATA_QSTOR is not set -# CONFIG_SATA_PROMISE is not set -# CONFIG_SATA_SX4 is not set -CONFIG_SATA_SIL=y # CONFIG_SATA_SIL24 is not set -# CONFIG_SATA_SIS is not set -# CONFIG_SATA_ULI is not set -CONFIG_SATA_VIA=y -# CONFIG_SATA_VITESSE is not set -# CONFIG_SATA_INIC162X is not set -# CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set -# CONFIG_PATA_ARTOP is not set -# CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_CMD64X is not set -# CONFIG_PATA_CS5520 is not set -# CONFIG_PATA_CS5530 is not set -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_ATA_GENERIC is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT821X is not set -# CONFIG_PATA_IT8213 is not set -# CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_NETCELL is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -# CONFIG_PATA_RZ1000 is not set -# CONFIG_PATA_SC1200 is not set -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_SIL680 is not set -# CONFIG_PATA_SIS is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set +# CONFIG_ATA_SFF is not set CONFIG_MD=y # CONFIG_BLK_DEV_MD is not set CONFIG_BLK_DEV_DM=y @@ -637,16 +664,14 @@ CONFIG_BLK_DEV_DM=y # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# +# CONFIG_DM_UEVENT is not set CONFIG_FUSION=y CONFIG_FUSION_SPI=y # CONFIG_FUSION_FC is not set # CONFIG_FUSION_SAS is not set CONFIG_FUSION_MAX_SGE=128 # CONFIG_FUSION_CTL is not set +# CONFIG_FUSION_LOGGING is not set # # IEEE 1394 (FireWire) support @@ -687,6 +712,7 @@ CONFIG_NETDEVICES_MULTIQUEUE=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=y +# CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set @@ -709,15 +735,21 @@ CONFIG_TULIP=y # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set CONFIG_AMD8111_ETH=y # CONFIG_AMD8111E_NAPI is not set # CONFIG_ADAPTEC_STARFIRE is not set CONFIG_B44=y +CONFIG_B44_PCI_AUTOSELECT=y +CONFIG_B44_PCICORE_AUTOSELECT=y +CONFIG_B44_PCI=y CONFIG_FORCEDETH=y # CONFIG_FORCEDETH_NAPI is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set @@ -729,6 +761,7 @@ CONFIG_8139TOO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -740,6 +773,10 @@ CONFIG_NETDEV_1000=y CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -755,12 +792,17 @@ CONFIG_BNX2=y CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set CONFIG_S2IO=m # CONFIG_S2IO_NAPI is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -768,6 +810,8 @@ CONFIG_S2IO=m # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -776,7 +820,6 @@ CONFIG_S2IO=m # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -784,8 +827,8 @@ CONFIG_S2IO=m # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y @@ -807,7 +850,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -856,7 +898,9 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -880,7 +924,6 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_INTEL=y CONFIG_HW_RANDOM_AMD=y @@ -888,12 +931,6 @@ CONFIG_HW_RANDOM_AMD=y CONFIG_RTC=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -CONFIG_AGP=y -CONFIG_AGP_AMD64=y -CONFIG_AGP_INTEL=y -# CONFIG_AGP_SIS is not set -# CONFIG_AGP_VIA is not set -# CONFIG_DRM is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set CONFIG_RAW_DRIVER=y @@ -906,40 +943,69 @@ CONFIG_HPET_MMAP=y # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_HWMON is not set +CONFIG_THERMAL=y +# CONFIG_WATCHDOG is not set # -# SPI support +# Sonics Silicon Backplane # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set +CONFIG_SSB_POSSIBLE=y +CONFIG_SSB=y +CONFIG_SSB_SPROM=y +CONFIG_SSB_PCIHOST_POSSIBLE=y +CONFIG_SSB_PCIHOST=y +# CONFIG_SSB_B43_PCI_BRIDGE is not set +# CONFIG_SSB_DEBUG is not set +CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +CONFIG_SSB_DRIVER_PCICORE=y # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set # # Graphics support # +CONFIG_AGP=y +CONFIG_AGP_AMD64=y +CONFIG_AGP_INTEL=y +# CONFIG_AGP_SIS is not set +# CONFIG_AGP_VIA is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Console display driver support @@ -971,6 +1037,7 @@ CONFIG_SOUND_PRIME=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +CONFIG_HIDRAW=y # # USB Input Devices @@ -985,6 +1052,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -993,18 +1061,19 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_SSB is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y @@ -1036,7 +1105,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1049,10 +1120,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1078,55 +1145,20 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set - -# -# Real Time Clock -# # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# +CONFIG_DMADEVICES=y # # DMA Devices # -CONFIG_VIRTUALIZATION=y -# CONFIG_KVM is not set - -# -# Userspace I/O -# +# CONFIG_INTEL_IOATDMA is not set # CONFIG_UIO is not set # @@ -1136,6 +1168,7 @@ CONFIG_VIRTUALIZATION=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y +# CONFIG_ISCSI_IBFT_FIND is not set # # File systems @@ -1164,12 +1197,10 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1204,7 +1235,6 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1219,48 +1249,19 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1301,25 +1302,16 @@ CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Instrumentation Support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_KPROBES=y - # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y @@ -1330,6 +1322,7 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1344,28 +1337,64 @@ CONFIG_TIMER_STATS=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set # CONFIG_FRAME_POINTER is not set -CONFIG_OPTIMIZE_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set -# CONFIG_DEBUG_RODATA is not set -# CONFIG_IOMMU_DEBUG is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set +# CONFIG_SAMPLES is not set +# CONFIG_KGDB is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_NONPROMISC_DEVMEM is not set +CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUG_PER_CPU_MAPS is not set +# CONFIG_X86_PTDUMP is not set +# CONFIG_DEBUG_RODATA is not set +# CONFIG_DIRECT_GBPAGES is not set +# CONFIG_DEBUG_NX_TEST is not set +CONFIG_X86_MPPARSE=y +# CONFIG_IOMMU_DEBUG is not set +CONFIG_IO_DELAY_TYPE_0X80=0 +CONFIG_IO_DELAY_TYPE_0XED=1 +CONFIG_IO_DELAY_TYPE_UDELAY=2 +CONFIG_IO_DELAY_TYPE_NONE=3 +CONFIG_IO_DELAY_0X80=y +# CONFIG_IO_DELAY_0XED is not set +# CONFIG_IO_DELAY_UDELAY is not set +# CONFIG_IO_DELAY_NONE is not set +CONFIG_DEFAULT_IO_DELAY_TYPE=0 +# CONFIG_DEBUG_BOOT_PARAMS is not set +# CONFIG_CPA_DEBUG is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_HAVE_KVM is not set +# CONFIG_VIRTUALIZATION is not set +# CONFIG_KVM is not set +# CONFIG_VIRTIO_PCI is not set +# CONFIG_VIRTIO_BALLOON is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_FIRST_BIT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set From b5d958ea66ac11b1190c24f042f517adf9229a98 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Wed, 9 Apr 2008 13:17:39 -0700 Subject: [PATCH 044/821] e1000e: set CONFIG_E1000E=y in x86 defconfigs This adds to the already default CONFIG_E1000=y in these files. Signed-off-by: Auke Kok Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/configs/i386_defconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index ad7ddaaff588..73f2c3cb7cda 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -814,6 +814,10 @@ CONFIG_NETDEV_1000=y CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +CONFIG_E1000E=y +CONFIG_E1000E_ENABLED=y +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set From 5cb04df8d3f03e37a19f2502591a84156be71772 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sun, 4 May 2008 19:49:04 +0200 Subject: [PATCH 045/821] x86: defconfig updates refresh 32-bit defconfig too, and update the 64-bit configs as well, the defconfig should be much more useful by default, so most of the updates are the enabling of various options. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/configs/i386_defconfig | 1739 ++++++++++++++++++++--------- arch/x86/configs/x86_64_defconfig | 1378 ++++++++++++++++++----- 2 files changed, 2305 insertions(+), 812 deletions(-) diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index 73f2c3cb7cda..9bc34e2033ec 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -1,54 +1,103 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-git14 -# Fri Jul 20 09:53:15 2007 +# Linux kernel version: 2.6.26-rc1 +# Sun May 4 19:59:02 2008 # +# CONFIG_64BIT is not set CONFIG_X86_32=y +# CONFIG_X86_64 is not set +CONFIG_X86=y +CONFIG_DEFCONFIG_LIST="arch/x86/configs/i386_defconfig" +# CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y -CONFIG_SEMAPHORE_SLEEPERS=y -CONFIG_X86=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y -CONFIG_QUICKLIST=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y +# CONFIG_GENERIC_GPIO is not set CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_DMI=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 +# CONFIG_RWSEM_GENERIC_SPINLOCK is not set +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME_VSYSCALL is not set +CONFIG_ARCH_HAS_CPU_RELAX=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_ZONE_DMA32 is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y +# CONFIG_AUDIT_ARCH is not set +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_X86_SMP=y +CONFIG_X86_32_SMP=y +CONFIG_X86_HT=y +CONFIG_X86_BIOS_REBOOT=y +CONFIG_X86_TRAMPOLINE=y +CONFIG_KTIME_SCALAR=y # # General setup # +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=18 -# CONFIG_CPUSETS is not set -CONFIG_SYSFS_DEPRECATED=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_TREE=y +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_CGROUP_NS=y +# CONFIG_CGROUP_DEVICE is not set +CONFIG_CPUSETS=y +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +# CONFIG_USER_SCHED is not set +CONFIG_CGROUP_SCHED=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +# CONFIG_CGROUP_MEM_RES_CTLR is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_PROC_PID_CPUSET=y CONFIG_RELAY=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -56,13 +105,15 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -76,6 +127,17 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_MARKERS=y +# CONFIG_OPROFILE is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -87,10 +149,10 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_KMOD is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LBD is not set +CONFIG_BLK_DEV_IO_TRACE=y # CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set +CONFIG_BLK_DEV_BSG=y # # IO Schedulers @@ -103,7 +165,8 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y # # Processor type and features @@ -111,18 +174,21 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y -# CONFIG_X86_PC is not set +CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set -CONFIG_X86_GENERICARCH=y +# CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set -# CONFIG_PARAVIRT is not set -CONFIG_X86_CYCLONE_TIMER=y +# CONFIG_X86_RDC321X is not set +# CONFIG_X86_VSMP is not set +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_PARAVIRT_GUEST is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set @@ -130,9 +196,8 @@ CONFIG_X86_CYCLONE_TIMER=y # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set -CONFIG_MPENTIUMIII=y +# CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set -# CONFIG_MCORE2 is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set @@ -147,14 +212,14 @@ CONFIG_MPENTIUMIII=y # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set -CONFIG_X86_GENERIC=y +# CONFIG_MPSC is not set +CONFIG_MCORE2=y +# CONFIG_GENERIC_CPU is not set +# CONFIG_X86_GENERIC is not set +CONFIG_X86_CPU=y CONFIG_X86_CMPXCHG=y -CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_XADD=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y @@ -162,106 +227,120 @@ CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y +CONFIG_X86_P6_NOP=y CONFIG_X86_TSC=y -CONFIG_X86_CMOV=y -CONFIG_X86_MINIMUM_CPU_FAMILY=4 +CONFIG_X86_MINIMUM_CPU_FAMILY=6 +CONFIG_X86_DEBUGCTLMSR=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y -CONFIG_NR_CPUS=32 -CONFIG_SCHED_SMT=y +CONFIG_DMI=y +# CONFIG_IOMMU_HELPER is not set +CONFIG_NR_CPUS=4 +# CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y -CONFIG_X86_MCE=y -CONFIG_X86_MCE_NONFATAL=y -CONFIG_X86_MCE_P4THERMAL=y +# CONFIG_X86_MCE is not set CONFIG_VM86=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_X86_REBOOTFIXUPS is not set -CONFIG_MICROCODE=y -CONFIG_MICROCODE_OLD_INTERFACE=y +# CONFIG_MICROCODE is not set CONFIG_X86_MSR=y CONFIG_X86_CPUID=y - -# -# Firmware Drivers -# -# CONFIG_EDD is not set -# CONFIG_DELL_RBU is not set -# CONFIG_DCDBAS is not set -CONFIG_DMIID=y # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_HIGHMEM=y -CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_NEED_NODE_MEMMAP_SIZE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y +# CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set + +# +# Memory hotplug is currently incompatible with Software Suspend +# +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y -CONFIG_NR_QUICK=1 CONFIG_VIRT_TO_BUS=y # CONFIG_HIGHPTE is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y -# CONFIG_EFI is not set +# CONFIG_X86_PAT is not set +CONFIG_EFI=y # CONFIG_IRQBALANCE is not set CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set -CONFIG_HZ_250=y +# CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -# CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set -CONFIG_PHYSICAL_START=0x100000 -# CONFIG_RELOCATABLE is not set -CONFIG_PHYSICAL_ALIGN=0x100000 -# CONFIG_HOTPLUG_CPU is not set -CONFIG_COMPAT_VDSO=y +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +CONFIG_SCHED_HRTICK=y +CONFIG_KEXEC=y +CONFIG_CRASH_DUMP=y +CONFIG_PHYSICAL_START=0x1000000 +CONFIG_RELOCATABLE=y +CONFIG_PHYSICAL_ALIGN=0x200000 +CONFIG_HOTPLUG_CPU=y +# CONFIG_COMPAT_VDSO is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # -# Power management options (ACPI, APM) +# Power management options # CONFIG_PM=y -CONFIG_PM_LEGACY=y -# CONFIG_PM_DEBUG is not set - -# -# ACPI (Advanced Configuration and Power Interface) Support -# +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_TRACE=y +CONFIG_PM_TRACE_RTC=y +CONFIG_PM_SLEEP_SMP=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="" CONFIG_ACPI=y +CONFIG_ACPI_SLEEP=y CONFIG_ACPI_PROCFS=y +CONFIG_ACPI_PROCFS_POWER=y +CONFIG_ACPI_SYSFS_POWER=y +CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y -# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_DOCK=y +# CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=y +CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y +# CONFIG_ACPI_WMI is not set # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set -CONFIG_ACPI_BLACKLIST_YEAR=2001 -CONFIG_ACPI_DEBUG=y +# CONFIG_ACPI_CUSTOM_DSDT is not set +CONFIG_ACPI_BLACKLIST_YEAR=0 +# CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y -# CONFIG_ACPI_CONTAINER is not set +CONFIG_ACPI_CONTAINER=y # CONFIG_ACPI_SBS is not set # CONFIG_APM is not set @@ -271,15 +350,17 @@ CONFIG_X86_PM_TIMER=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_STAT is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # # CPUFreq processor drivers @@ -287,8 +368,7 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y CONFIG_X86_ACPI_CPUFREQ=y # CONFIG_X86_POWERNOW_K6 is not set # CONFIG_X86_POWERNOW_K7 is not set -CONFIG_X86_POWERNOW_K8=y -CONFIG_X86_POWERNOW_K8_ACPI=y +# CONFIG_X86_POWERNOW_K8 is not set # CONFIG_X86_GX_SUSPMOD is not set # CONFIG_X86_SPEEDSTEP_CENTRINO is not set # CONFIG_X86_SPEEDSTEP_ICH is not set @@ -302,43 +382,72 @@ CONFIG_X86_POWERNOW_K8_ACPI=y # # shared options # -CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y +# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_SPEEDSTEP_LIB is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y # -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# Bus options (PCI etc.) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y +# CONFIG_PCI_GOOLPC is not set CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y -# CONFIG_PCIEPORTBUS is not set +CONFIG_PCI_DOMAINS=y +CONFIG_PCIEPORTBUS=y +# CONFIG_HOTPLUG_PCI_PCIE is not set +CONFIG_PCIEAER=y +# CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set -# CONFIG_HT_IRQ is not set +CONFIG_HT_IRQ=y CONFIG_ISA_DMA_API=y # CONFIG_ISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set +# CONFIG_OLPC is not set CONFIG_K8_NB=y +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y # -# PCCARD (PCMCIA/CardBus) support +# PC-card bridges # -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set +CONFIG_YENTA=y +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_TOSHIBA=y +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_PCCARD_NONSTATIC=y +CONFIG_HOTPLUG_PCI=y +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_IBM is not set +# CONFIG_HOTPLUG_PCI_ACPI is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set # -# Executable file formats +# Executable file formats / Emulations # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_MISC=y # # Networking @@ -349,59 +458,142 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set +CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set +CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +# CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set +CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=y -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_INET_LRO=y +# CONFIG_INET_DIAG is not set +CONFIG_TCP_CONG_ADVANCED=y +# CONFIG_TCP_CONG_BIC is not set CONFIG_TCP_CONG_CUBIC=y +# CONFIG_TCP_CONG_WESTWOOD is not set +# CONFIG_TCP_CONG_HTCP is not set +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_TCP_CONG_LP is not set +# CONFIG_TCP_CONG_VENO is not set +# CONFIG_TCP_CONG_YEAH is not set +# CONFIG_TCP_CONG_ILLINOIS is not set +# CONFIG_DEFAULT_BIC is not set +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set +CONFIG_TCP_MD5SIG=y +# CONFIG_IP_VS is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set +CONFIG_INET6_AH=y +CONFIG_INET6_ESP=y # CONFIG_INET6_IPCOMP is not set # CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y -# CONFIG_INET6_XFRM_MODE_BEET is not set +CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set +# CONFIG_IPV6_MROUTE is not set +CONFIG_NETLABEL=y +CONFIG_NETWORK_SECMARK=y +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_ADVANCED is not set + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=y +CONFIG_NETFILTER_NETLINK_LOG=y +CONFIG_NF_CONNTRACK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_FTP=y +CONFIG_NF_CONNTRACK_IRC=y +CONFIG_NF_CONNTRACK_SIP=y +CONFIG_NF_CT_NETLINK=y +CONFIG_NETFILTER_XTABLES=y +CONFIG_NETFILTER_XT_TARGET_MARK=y +CONFIG_NETFILTER_XT_TARGET_NFLOG=y +CONFIG_NETFILTER_XT_TARGET_SECMARK=y +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y +CONFIG_NETFILTER_XT_TARGET_TCPMSS=y +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y +CONFIG_NETFILTER_XT_MATCH_MARK=y +CONFIG_NETFILTER_XT_MATCH_POLICY=y +CONFIG_NETFILTER_XT_MATCH_STATE=y + +# +# IP: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV4=y +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +CONFIG_IP_NF_TARGET_LOG=y +CONFIG_IP_NF_TARGET_ULOG=y +CONFIG_NF_NAT=y +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=y +CONFIG_NF_NAT_FTP=y +CONFIG_NF_NAT_IRC=y +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_H323 is not set +CONFIG_NF_NAT_SIP=y +CONFIG_IP_NF_MANGLE=y + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=y +CONFIG_IP6_NF_IPTABLES=y +CONFIG_IP6_NF_MATCH_IPV6HEADER=y +CONFIG_IP6_NF_FILTER=y +CONFIG_IP6_NF_TARGET_LOG=y +CONFIG_IP6_NF_TARGET_REJECT=y +CONFIG_IP6_NF_MANGLE=y # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set @@ -409,6 +601,7 @@ CONFIG_IPV6_SIT=y # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set +CONFIG_LLC=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set @@ -416,28 +609,99 @@ CONFIG_IPV6_SIT=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +CONFIG_NET_SCHED=y # -# QoS and/or fair queueing +# Queueing/Scheduling # -# CONFIG_NET_SCHED is not set +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_RR is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_INGRESS is not set + +# +# Classification +# +CONFIG_NET_CLS=y +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +# CONFIG_NET_EMATCH_CMP is not set +# CONFIG_NET_EMATCH_NBYTE is not set +# CONFIG_NET_EMATCH_U32 is not set +# CONFIG_NET_EMATCH_META is not set +# CONFIG_NET_EMATCH_TEXT is not set +CONFIG_NET_CLS_ACT=y +# CONFIG_NET_ACT_POLICE is not set +# CONFIG_NET_ACT_GACT is not set +# CONFIG_NET_ACT_MIRRED is not set +# CONFIG_NET_ACT_IPT is not set +# CONFIG_NET_ACT_NAT is not set +# CONFIG_NET_ACT_PEDIT is not set +# CONFIG_NET_ACT_SIMP is not set +CONFIG_NET_SCH_FIFO=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set -# CONFIG_HAMRADIO is not set +CONFIG_HAMRADIO=y + +# +# Packet Radio protocols +# +# CONFIG_AX25 is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y # # Wireless # -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set +CONFIG_CFG80211=y +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=y + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_NONE is not set + +# +# Selecting 'y' for an algorithm will +# + +# +# build the algorithm into mac80211. +# +CONFIG_MAC80211_RC_DEFAULT="pid" +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set +# CONFIG_MAC80211_DEBUG is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -449,13 +713,15 @@ CONFIG_IPV6_SIT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set +CONFIG_DEBUG_DEVRES=y # CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y @@ -466,7 +732,7 @@ CONFIG_PNP=y # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_FD=y +# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -479,8 +745,8 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -489,73 +755,17 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ACER_WMI is not set +# CONFIG_ASUS_LAPTOP is not set +# CONFIG_FUJITSU_LAPTOP is not set +# CONFIG_TC1100_WMI is not set +# CONFIG_MSI_LAPTOP is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -# CONFIG_BLK_DEV_HD_IDE is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -CONFIG_BLK_DEV_IDEACPI=y -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_CMD640 is not set -# CONFIG_BLK_DEV_IDEPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set -CONFIG_IDEPCI_PCIBUS_ORDER=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_RZ1000 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_BLK_DEV_ATIIXP is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_CS5535 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_JMICRON is not set -# CONFIG_BLK_DEV_SC1200 is not set -CONFIG_BLK_DEV_PIIX=y -# CONFIG_BLK_DEV_IT8213 is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SIS5513 is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_BLK_DEV_HD is not set +# CONFIG_INTEL_MENLOW is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set # # SCSI device support @@ -564,8 +774,8 @@ CONFIG_BLK_DEV_IDEDMA=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set -CONFIG_SCSI_NETLINK=y -# CONFIG_SCSI_PROC_FS is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) @@ -574,7 +784,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set @@ -582,7 +792,7 @@ CONFIG_CHR_DEV_SG=y # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set +CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m @@ -591,81 +801,37 @@ CONFIG_SCSI_WAIT_SCAN=m # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -CONFIG_BLK_DEV_3W_XXXX_RAID=y -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -CONFIG_SCSI_AIC7XXX=y -CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 -CONFIG_AIC7XXX_RESET_DELAY_MS=5000 -CONFIG_AIC7XXX_DEBUG_ENABLE=y -CONFIG_AIC7XXX_DEBUG_MASK=0 -CONFIG_AIC7XXX_REG_PRETTY_PRINT=y -# CONFIG_SCSI_AIC7XXX_OLD is not set -CONFIG_SCSI_AIC79XX=y -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=4000 -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y -CONFIG_SATA_SVW=y +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set CONFIG_ATA_PIIX=y # CONFIG_SATA_MV is not set -CONFIG_SATA_NV=y +# CONFIG_SATA_NV is not set # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set -CONFIG_SATA_SIL=y -# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIL is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set -CONFIG_SATA_VIA=y +# CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ACPI is not set # CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set +CONFIG_PATA_AMD=y # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set @@ -673,6 +839,7 @@ CONFIG_SATA_VIA=y # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CS5535 is not set +# CONFIG_PATA_CS5536 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set # CONFIG_ATA_GENERIC is not set @@ -686,11 +853,14 @@ CONFIG_SATA_VIA=y # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set +CONFIG_PATA_OLDPIIX=y # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PCMCIA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set @@ -702,65 +872,42 @@ CONFIG_SATA_VIA=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_MD=y +# CONFIG_MD_LINEAR is not set +# CONFIG_MD_RAID0 is not set +# CONFIG_MD_RAID1 is not set +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID456 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y # CONFIG_DM_DEBUG is not set # CONFIG_DM_CRYPT is not set # CONFIG_DM_SNAPSHOT is not set -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set +CONFIG_DM_MIRROR=y +CONFIG_DM_ZERO=y # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# -CONFIG_FUSION=y -CONFIG_FUSION_SPI=y -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set -CONFIG_FUSION_MAX_SGE=128 -# CONFIG_FUSION_CTL is not set +# CONFIG_DM_UEVENT is not set +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set -CONFIG_IEEE1394=y - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# Controllers -# - -# -# Texas Instruments PCILynx requires I2C -# -CONFIG_IEEE1394_OHCI1394=y - -# -# Protocols -# -# CONFIG_IEEE1394_VIDEO1394 is not set -# CONFIG_IEEE1394_SBP2 is not set -# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set -# CONFIG_IEEE1394_ETH1394 is not set -# CONFIG_IEEE1394_DV1394 is not set -CONFIG_IEEE1394_RAWIO=y +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_MACINTOSH_DRIVERS=y -# CONFIG_MAC_EMUMOUSEBTN is not set +CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y -CONFIG_NETDEVICES_MULTIQUEUE=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_IFB is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set @@ -770,38 +917,40 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y -CONFIG_VORTEX=y +# CONFIG_VORTEX is not set # CONFIG_TYPHOON is not set CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set -CONFIG_TULIP=y -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -# CONFIG_TULIP_NAPI is not set +# CONFIG_TULIP is not set # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set +# CONFIG_PCMCIA_XIRCOM is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set -CONFIG_B44=y +# CONFIG_B44 is not set CONFIG_FORCEDETH=y # CONFIG_FORCEDETH_NAPI is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set -CONFIG_8139CP=y +# CONFIG_8139CP is not set CONFIG_8139TOO=y -# CONFIG_8139TOO_PIO is not set +CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -814,38 +963,75 @@ CONFIG_NETDEV_1000=y CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set -CONFIG_E1000E=y -CONFIG_E1000E_ENABLED=y +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set -CONFIG_R8169=y -# CONFIG_R8169_NAPI is not set +# CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set CONFIG_SKY2=y +# CONFIG_SKY2_DEBUG is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y -CONFIG_BNX2=y +# CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set -# CONFIG_TR is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set +CONFIG_TR=y +# CONFIG_IBMOL is not set +# CONFIG_IBMLS is not set +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_LIBERTAS is not set +# CONFIG_AIRO is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +# CONFIG_ADM8211 is not set +# CONFIG_P54_COMMON is not set +CONFIG_ATH5K=y +# CONFIG_ATH5K_DEBUG is not set +# CONFIG_IWLWIFI is not set +# CONFIG_IWLCORE is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set # # USB Network Adapters @@ -854,16 +1040,27 @@ CONFIG_NETDEV_10000=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +# CONFIG_PCMCIA_PCNET is not set +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set +# CONFIG_PCMCIA_IBMTR is not set # CONFIG_WAN is not set -# CONFIG_FDDI is not set +CONFIG_FDDI=y +# CONFIG_DEFXX is not set +# CONFIG_SKFP is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y @@ -874,18 +1071,17 @@ CONFIG_NET_POLL_CONTROLLER=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_POLLDEV=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -910,17 +1106,63 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_JOYSTICK=y +# CONFIG_JOYSTICK_ANALOG is not set +# CONFIG_JOYSTICK_A3D is not set +# CONFIG_JOYSTICK_ADI is not set +# CONFIG_JOYSTICK_COBRA is not set +# CONFIG_JOYSTICK_GF2K is not set +# CONFIG_JOYSTICK_GRIP is not set +# CONFIG_JOYSTICK_GRIP_MP is not set +# CONFIG_JOYSTICK_GUILLEMOT is not set +# CONFIG_JOYSTICK_INTERACT is not set +# CONFIG_JOYSTICK_SIDEWINDER is not set +# CONFIG_JOYSTICK_TMDC is not set +# CONFIG_JOYSTICK_IFORCE is not set +# CONFIG_JOYSTICK_WARRIOR is not set +# CONFIG_JOYSTICK_MAGELLAN is not set +# CONFIG_JOYSTICK_SPACEORB is not set +# CONFIG_JOYSTICK_SPACEBALL is not set +# CONFIG_JOYSTICK_STINGER is not set +# CONFIG_JOYSTICK_TWIDJOY is not set +# CONFIG_JOYSTICK_ZHENHUA is not set +# CONFIG_JOYSTICK_JOYDUMP is not set +# CONFIG_JOYSTICK_XPAD is not set +CONFIG_INPUT_TABLET=y +# CONFIG_TABLET_USB_ACECAD is not set +# CONFIG_TABLET_USB_AIPTEK is not set +# CONFIG_TABLET_USB_GTCO is not set +# CONFIG_TABLET_USB_KBTAB is not set +# CONFIG_TABLET_USB_WACOM is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_PCSPKR is not set +# CONFIG_INPUT_APANEL is not set +# CONFIG_INPUT_WISTRON_BTNS is not set +# CONFIG_INPUT_ATLAS_BTNS is not set +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_UINPUT is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y @@ -933,8 +1175,26 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINK is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set +# CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_RIO is not set +# CONFIG_STALDRV is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -944,9 +1204,14 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y -CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support @@ -955,20 +1220,168 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_INTEL=y -CONFIG_HW_RANDOM_AMD=y +# CONFIG_HW_RANDOM_INTEL is not set +# CONFIG_HW_RANDOM_AMD is not set CONFIG_HW_RANDOM_GEODE=y CONFIG_HW_RANDOM_VIA=y -# CONFIG_NVRAM is not set -CONFIG_RTC=y +CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set +# CONFIG_MWAVE is not set +# CONFIG_PC8736x_GPIO is not set +# CONFIG_NSC_GPIO is not set +# CONFIG_CS5535_GPIO is not set +# CONFIG_RAW_DRIVER is not set +CONFIG_HPET=y +# CONFIG_HPET_RTC_IRQ is not set +# CONFIG_HPET_MMAP is not set +# CONFIG_HANGCHECK_TIMER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +CONFIG_I2C_I801=y +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADVANTECH_WDT is not set +# CONFIG_ALIM1535_WDT is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_SC520_WDT is not set +# CONFIG_EUROTECH_WDT is not set +# CONFIG_IB700_WDT is not set +# CONFIG_IBMASR is not set +# CONFIG_WAFER_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_ITCO_WDT is not set +# CONFIG_IT8712F_WDT is not set +# CONFIG_HP_WATCHDOG is not set +# CONFIG_SC1200_WDT is not set +# CONFIG_PC87413_WDT is not set +# CONFIG_60XX_WDT is not set +# CONFIG_SBC8360_WDT is not set +# CONFIG_SBC7240_WDT is not set +# CONFIG_CPU5_WDT is not set +# CONFIG_SMSC37B787_WDT is not set +# CONFIG_W83627HF_WDT is not set +# CONFIG_W83697HF_WDT is not set +# CONFIG_W83877F_WDT is not set +# CONFIG_W83977F_WDT is not set +# CONFIG_MACHZ_WDT is not set +# CONFIG_SBC_EPX_C3_WATCHDOG is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# CONFIG_AGP=y # CONFIG_AGP_ALI is not set # CONFIG_AGP_ATI is not set @@ -980,64 +1393,102 @@ CONFIG_AGP_INTEL=y # CONFIG_AGP_SWORKS is not set # CONFIG_AGP_VIA is not set # CONFIG_AGP_EFFICEON is not set -# CONFIG_DRM is not set -# CONFIG_MWAVE is not set -# CONFIG_PC8736x_GPIO is not set -# CONFIG_NSC_GPIO is not set -# CONFIG_CS5535_GPIO is not set -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=256 -CONFIG_HPET=y -# CONFIG_HPET_RTC_IRQ is not set -CONFIG_HPET_MMAP=y -# CONFIG_HANGCHECK_TIMER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set -CONFIG_DEVPORT=y -# CONFIG_I2C is not set +CONFIG_DRM=y +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_I810 is not set +# CONFIG_DRM_I830 is not set +CONFIG_DRM_I915=y +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_SIS is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y # -# SPI support +# Frame buffer hardware drivers # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ARC is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_VESA is not set +CONFIG_FB_EFI=y +# CONFIG_FB_IMAC is not set +# CONFIG_FB_N411 is not set +# CONFIG_FB_HGA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I810 is not set +# CONFIG_FB_LE80578 is not set +# CONFIG_FB_INTEL is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_CYBLA is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_GEODE is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set +# CONFIG_BACKLIGHT_PROGEAR is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y -CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128 +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y # # Sound @@ -1047,33 +1498,167 @@ CONFIG_SOUND=y # # Advanced Linux Sound Architecture # -# CONFIG_SND is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_SEQ_DUMMY=y +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y + +# +# Generic devices +# +# CONFIG_SND_PCSP is not set +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5530 is not set +# CONFIG_SND_CS5535AUDIO is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +CONFIG_SND_HDA_INTEL=y +CONFIG_SND_HDA_HWDEP=y +CONFIG_SND_HDA_CODEC_REALTEK=y +CONFIG_SND_HDA_CODEC_ANALOG=y +CONFIG_SND_HDA_CODEC_SIGMATEL=y +CONFIG_SND_HDA_CODEC_VIA=y +CONFIG_SND_HDA_CODEC_ATIHDMI=y +CONFIG_SND_HDA_CODEC_CONEXANT=y +CONFIG_SND_HDA_CODEC_CMEDIA=y +CONFIG_SND_HDA_CODEC_SI3054=y +CONFIG_SND_HDA_GENERIC=y +# CONFIG_SND_HDA_POWER_SAVE is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SIS7019 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_USX2Y is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# ALSA SoC audio for Freescale SOCs +# + +# +# SoC Audio for the Texas Instruments OMAP +# # # Open Sound System # -CONFIG_SOUND_PRIME=y -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_OSS is not set +# CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set +CONFIG_HID_DEBUG=y +CONFIG_HIDRAW=y # # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set +CONFIG_USB_HIDINPUT_POWERBOOK=y +CONFIG_HID_FF=y +CONFIG_HID_PID=y +CONFIG_LOGITECH_FF=y +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_PANTHERLORD_FF=y +CONFIG_THRUSTMASTER_FF=y +CONFIG_ZEROPLUS_FF=y +CONFIG_USB_HIDDEV=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y -# CONFIG_USB_DEBUG is not set +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options @@ -1081,18 +1666,18 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set +CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1125,8 +1710,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +CONFIG_USB_LIBUSUAL=y # # USB Imaging devices @@ -1138,10 +1725,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1167,90 +1750,125 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_CLEVO_MAIL is not set # # LED Triggers # +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set +CONFIG_EDAC=y # -# Real Time Clock +# Reporting subsystems # -# CONFIG_RTC_CLASS is not set +# CONFIG_EDAC_DEBUG is not set +# CONFIG_EDAC_MM_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# I2C RTC drivers # +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_DMADEVICES=y # # DMA Devices # -CONFIG_VIRTUALIZATION=y -# CONFIG_KVM is not set +# CONFIG_INTEL_IOATDMA is not set +# CONFIG_UIO is not set # -# Userspace I/O +# Firmware Drivers # -# CONFIG_UIO is not set +# CONFIG_EDD is not set +CONFIG_EFI_VARS=y +# CONFIG_DELL_RBU is not set +# CONFIG_DCDBAS is not set +CONFIG_DMIID=y +# CONFIG_ISCSI_IBFT_FIND is not set # # File systems # -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y -# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -# CONFIG_REISERFS_FS_SECURITY is not set +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1260,8 +1878,8 @@ CONFIG_GENERIC_ACL=y # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set +CONFIG_JOLIET=y +CONFIG_ZISOFS=y # CONFIG_UDF_FS is not set # @@ -1279,13 +1897,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_VMCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1293,6 +1911,7 @@ CONFIG_RAMFS=y # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -1300,33 +1919,15 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set @@ -1336,14 +1937,26 @@ CONFIG_SUNRPC=y # # Partition Types # -# CONFIG_PARTITION_ADVANCED is not set +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_LDM_PARTITION is not set +CONFIG_SGI_PARTITION=y +# CONFIG_ULTRIX_PARTITION is not set +CONFIG_SUN_PARTITION=y +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set @@ -1378,37 +1991,33 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_KPROBES=y # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y -CONFIG_UNUSED_SYMBOLS=y -# CONFIG_DEBUG_FS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set +CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1423,48 +2032,174 @@ CONFIG_TIMER_STATS=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set -# CONFIG_FRAME_POINTER is not set -CONFIG_OPTIMIZE_INLINING=y +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_PROVIDE_OHCI1394_DMA_INIT=y +# CONFIG_SAMPLES is not set +# CONFIG_KGDB is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_NONPROMISC_DEVMEM is not set CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_RODATA is not set +CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_X86_PTDUMP is not set +CONFIG_DEBUG_RODATA=y +# CONFIG_DEBUG_RODATA_TEST is not set +CONFIG_DEBUG_NX_TEST=m # CONFIG_4KSTACKS is not set CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y CONFIG_DOUBLEFAULT=y +CONFIG_IO_DELAY_TYPE_0X80=0 +CONFIG_IO_DELAY_TYPE_0XED=1 +CONFIG_IO_DELAY_TYPE_UDELAY=2 +CONFIG_IO_DELAY_TYPE_NONE=3 +CONFIG_IO_DELAY_0X80=y +# CONFIG_IO_DELAY_0XED is not set +# CONFIG_IO_DELAY_UDELAY is not set +# CONFIG_IO_DELAY_NONE is not set +CONFIG_DEFAULT_IO_DELAY_TYPE=0 +CONFIG_DEBUG_BOOT_PARAMS=y +# CONFIG_CPA_DEBUG is not set # # Security options # -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_CRYPTO is not set +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK=y +# CONFIG_SECURITY_NETWORK_XFRM is not set +CONFIG_SECURITY_CAPABILITIES=y +CONFIG_SECURITY_FILE_CAPABILITIES=y +# CONFIG_SECURITY_ROOTPLUG is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536 +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set +# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set +# CONFIG_SECURITY_SMACK is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_AES_586 is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SALSA20_586 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_TWOFISH_586 is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_PADLOCK is not set +# CONFIG_CRYPTO_DEV_GEODE is not set +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_HAVE_KVM=y +CONFIG_VIRTUALIZATION=y +# CONFIG_KVM is not set +# CONFIG_LGUEST is not set +# CONFIG_VIRTIO_PCI is not set +# CONFIG_VIRTIO_BALLOON is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_FIRST_BIT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_PENDING_IRQ=y -CONFIG_X86_SMP=y -CONFIG_X86_HT=y -CONFIG_X86_BIOS_REBOOT=y -CONFIG_X86_TRAMPOLINE=y -CONFIG_KTIME_SCALAR=y diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index 2f1b35664998..ae5124e064d4 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.26-rc1 -# Sun May 4 19:27:29 2008 +# Sun May 4 19:59:57 2008 # CONFIG_64BIT=y # CONFIG_X86_32 is not set @@ -61,27 +61,42 @@ CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=18 -# CONFIG_CGROUPS is not set -# CONFIG_GROUP_SCHED is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_TREE=y +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_CGROUP_NS=y +# CONFIG_CGROUP_DEVICE is not set +CONFIG_CPUSETS=y +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set # CONFIG_USER_SCHED is not set -# CONFIG_CGROUP_SCHED is not set +CONFIG_CGROUP_SCHED=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +# CONFIG_CGROUP_MEM_RES_CTLR is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_PROC_PID_CPUSET=y CONFIG_RELAY=y CONFIG_NAMESPACES=y CONFIG_UTS_NS=y CONFIG_IPC_NS=y -# CONFIG_USER_NS is not set +CONFIG_USER_NS=y CONFIG_PID_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" @@ -93,7 +108,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -108,12 +123,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y -# CONFIG_MARKERS is not set -CONFIG_OPROFILE=y +CONFIG_MARKERS=y +# CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y CONFIG_KRETPROBES=y @@ -133,15 +149,15 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_KMOD is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_BSG is not set +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_BLK_DEV_BSG=y CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set @@ -155,7 +171,7 @@ CONFIG_CLASSIC_RCU=y # Processor type and features # CONFIG_TICK_ONESHOT=y -# CONFIG_NO_HZ is not set +CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y @@ -171,7 +187,8 @@ CONFIG_X86_PC=y # CONFIG_X86_RDC321X is not set # CONFIG_X86_VSMP is not set # CONFIG_PARAVIRT_GUEST is not set -# CONFIG_MEMTEST_BOOTPARAM is not set +CONFIG_MEMTEST_BOOTPARAM=y +CONFIG_MEMTEST_BOOTPARAM_VALUE=0 # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set @@ -196,14 +213,17 @@ CONFIG_X86_PC=y # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set -# CONFIG_MCORE2 is not set -CONFIG_GENERIC_CPU=y +CONFIG_MCORE2=y +# CONFIG_GENERIC_CPU is not set CONFIG_X86_CPU=y -CONFIG_X86_L1_CACHE_BYTES=128 -CONFIG_X86_INTERNODE_CACHE_BYTES=128 +CONFIG_X86_L1_CACHE_BYTES=64 +CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y -CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_GOOD_APIC=y +CONFIG_X86_INTEL_USERCOPY=y +CONFIG_X86_USE_PPRO_CHECKSUM=y +CONFIG_X86_P6_NOP=y CONFIG_X86_TSC=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 @@ -212,20 +232,19 @@ CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y CONFIG_GART_IOMMU=y -# CONFIG_CALGARY_IOMMU is not set +CONFIG_CALGARY_IOMMU=y +CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y -CONFIG_NR_CPUS=32 -CONFIG_SCHED_SMT=y +CONFIG_NR_CPUS=4 +# CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y -CONFIG_X86_MCE=y -CONFIG_X86_MCE_INTEL=y -CONFIG_X86_MCE_AMD=y +# CONFIG_X86_MCE is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set CONFIG_X86_MSR=y @@ -234,7 +253,7 @@ CONFIG_NUMA=y CONFIG_K8_NUMA=y CONFIG_X86_64_ACPI_NUMA=y CONFIG_NODES_SPAN_OTHER_NODES=y -CONFIG_NUMA_EMU=y +# CONFIG_NUMA_EMU is not set CONFIG_NODES_SHIFT=6 CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y @@ -249,7 +268,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y -# CONFIG_SPARSEMEM_VMEMMAP is not set +CONFIG_SPARSEMEM_VMEMMAP=y # # Memory hotplug is currently incompatible with Software Suspend @@ -263,18 +282,18 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_MTRR=y # CONFIG_X86_PAT is not set -# CONFIG_EFI is not set +CONFIG_EFI=y CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set -CONFIG_HZ_250=y +# CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 +CONFIG_HZ_1000=y +CONFIG_HZ=1000 CONFIG_SCHED_HRTICK=y -# CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set -CONFIG_PHYSICAL_START=0x200000 -# CONFIG_RELOCATABLE is not set +CONFIG_KEXEC=y +CONFIG_CRASH_DUMP=y +CONFIG_PHYSICAL_START=0x1000000 +CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x200000 CONFIG_HOTPLUG_CPU=y # CONFIG_COMPAT_VDSO is not set @@ -286,10 +305,15 @@ CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y # CONFIG_ARCH_HIBERNATION_HEADER=y CONFIG_PM=y -# CONFIG_PM_DEBUG is not set +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_TRACE=y +CONFIG_PM_TRACE_RTC=y CONFIG_PM_SLEEP_SMP=y CONFIG_PM_SLEEP=y -# CONFIG_SUSPEND is not set +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" CONFIG_ACPI=y @@ -327,35 +351,34 @@ CONFIG_ACPI_CONTAINER=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_STAT is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # # CPUFreq processor drivers # CONFIG_X86_ACPI_CPUFREQ=y -CONFIG_X86_POWERNOW_K8=y -CONFIG_X86_POWERNOW_K8_ACPI=y +# CONFIG_X86_POWERNOW_K8 is not set # CONFIG_X86_SPEEDSTEP_CENTRINO is not set -CONFIG_X86_P4_CLOCKMOD=y +# CONFIG_X86_P4_CLOCKMOD is not set # # shared options # -CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y -CONFIG_X86_SPEEDSTEP_LIB=y +# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set +# CONFIG_X86_SPEEDSTEP_LIB is not set CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y # # Bus options (PCI etc.) @@ -364,28 +387,53 @@ CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y -# CONFIG_DMAR is not set +CONFIG_DMAR=y +CONFIG_DMAR_GFX_WA=y +CONFIG_DMAR_FLOPPY_WA=y CONFIG_PCIEPORTBUS=y +# CONFIG_HOTPLUG_PCI_PCIE is not set CONFIG_PCIEAER=y # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set -# CONFIG_HT_IRQ is not set +CONFIG_HT_IRQ=y CONFIG_ISA_DMA_API=y CONFIG_K8_NB=y -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=y +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_TOSHIBA=y +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_PCCARD_NONSTATIC=y +CONFIG_HOTPLUG_PCI=y +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_ACPI is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_MISC=y CONFIG_IA32_EMULATION=y -CONFIG_IA32_AOUT=y +# CONFIG_IA32_AOUT is not set CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y @@ -399,22 +447,31 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set +CONFIG_PACKET_MMAP=y CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +# CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set +CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set @@ -423,34 +480,109 @@ CONFIG_INET_TUNNEL=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_INET_LRO=y +# CONFIG_INET_DIAG is not set +CONFIG_TCP_CONG_ADVANCED=y +# CONFIG_TCP_CONG_BIC is not set CONFIG_TCP_CONG_CUBIC=y +# CONFIG_TCP_CONG_WESTWOOD is not set +# CONFIG_TCP_CONG_HTCP is not set +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_TCP_CONG_LP is not set +# CONFIG_TCP_CONG_VENO is not set +# CONFIG_TCP_CONG_YEAH is not set +# CONFIG_TCP_CONG_ILLINOIS is not set +# CONFIG_DEFAULT_BIC is not set +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set +CONFIG_TCP_MD5SIG=y +# CONFIG_IP_VS is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set +CONFIG_INET6_AH=y +CONFIG_INET6_ESP=y # CONFIG_INET6_IPCOMP is not set # CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET6_XFRM_MODE_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_BEET is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_IPV6_MROUTE is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set +CONFIG_NETLABEL=y +CONFIG_NETWORK_SECMARK=y +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_ADVANCED is not set + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=y +CONFIG_NETFILTER_NETLINK_LOG=y +CONFIG_NF_CONNTRACK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_FTP=y +CONFIG_NF_CONNTRACK_IRC=y +CONFIG_NF_CONNTRACK_SIP=y +CONFIG_NF_CT_NETLINK=y +CONFIG_NETFILTER_XTABLES=y +CONFIG_NETFILTER_XT_TARGET_MARK=y +CONFIG_NETFILTER_XT_TARGET_NFLOG=y +CONFIG_NETFILTER_XT_TARGET_SECMARK=y +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y +CONFIG_NETFILTER_XT_TARGET_TCPMSS=y +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y +CONFIG_NETFILTER_XT_MATCH_MARK=y +CONFIG_NETFILTER_XT_MATCH_POLICY=y +CONFIG_NETFILTER_XT_MATCH_STATE=y + +# +# IP: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV4=y +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +CONFIG_IP_NF_TARGET_LOG=y +CONFIG_IP_NF_TARGET_ULOG=y +CONFIG_NF_NAT=y +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=y +CONFIG_NF_NAT_FTP=y +CONFIG_NF_NAT_IRC=y +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_H323 is not set +CONFIG_NF_NAT_SIP=y +CONFIG_IP_NF_MANGLE=y + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=y +CONFIG_IP6_NF_IPTABLES=y +CONFIG_IP6_NF_MATCH_IPV6HEADER=y +CONFIG_IP6_NF_FILTER=y +CONFIG_IP6_NF_TARGET_LOG=y +CONFIG_IP6_NF_TARGET_REJECT=y +CONFIG_IP6_NF_MANGLE=y # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set @@ -458,6 +590,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set +CONFIG_LLC=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set @@ -465,25 +598,99 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_RR is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_INGRESS is not set + +# +# Classification +# +CONFIG_NET_CLS=y +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +# CONFIG_NET_EMATCH_CMP is not set +# CONFIG_NET_EMATCH_NBYTE is not set +# CONFIG_NET_EMATCH_U32 is not set +# CONFIG_NET_EMATCH_META is not set +# CONFIG_NET_EMATCH_TEXT is not set +CONFIG_NET_CLS_ACT=y +# CONFIG_NET_ACT_POLICE is not set +# CONFIG_NET_ACT_GACT is not set +# CONFIG_NET_ACT_MIRRED is not set +# CONFIG_NET_ACT_IPT is not set +# CONFIG_NET_ACT_NAT is not set +# CONFIG_NET_ACT_PEDIT is not set +# CONFIG_NET_ACT_SIMP is not set +CONFIG_NET_SCH_FIFO=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set -# CONFIG_HAMRADIO is not set +CONFIG_HAMRADIO=y + +# +# Packet Radio protocols +# +# CONFIG_AX25 is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y # # Wireless # -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set +CONFIG_CFG80211=y +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=y + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_NONE is not set + +# +# Selecting 'y' for an algorithm will +# + +# +# build the algorithm into mac80211. +# +CONFIG_MAC80211_RC_DEFAULT="pid" +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set +# CONFIG_MAC80211_DEBUG is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -500,9 +707,10 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set +CONFIG_DEBUG_DEVRES=y # CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y @@ -513,7 +721,7 @@ CONFIG_PNP=y # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_FD=y +# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -526,7 +734,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -536,77 +744,16 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ACER_WMI is not set +# CONFIG_ASUS_LAPTOP is not set +# CONFIG_FUJITSU_LAPTOP is not set +# CONFIG_MSI_LAPTOP is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set # CONFIG_INTEL_MENLOW is not set # CONFIG_ENCLOSURE_SERVICES is not set CONFIG_HAVE_IDE=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -CONFIG_BLK_DEV_IDEACPI=y -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_PLATFORM is not set -# CONFIG_BLK_DEV_CMD640 is not set -# CONFIG_BLK_DEV_IDEPNP is not set -CONFIG_BLK_DEV_IDEDMA_SFF=y - -# -# PCI IDE chipsets support -# -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_PCIBUS_ORDER=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_RZ1000 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_ATIIXP=y -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_JMICRON is not set -# CONFIG_BLK_DEV_SC1200 is not set -CONFIG_BLK_DEV_PIIX=y -# CONFIG_BLK_DEV_IT8213 is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -CONFIG_BLK_DEV_PDC202XX_NEW=y -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SIS5513 is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_BLK_DEV_TC86C001 is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set +# CONFIG_IDE is not set # # SCSI device support @@ -615,8 +762,8 @@ CONFIG_BLK_DEV_IDEDMA=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set -CONFIG_SCSI_NETLINK=y -# CONFIG_SCSI_PROC_FS is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) @@ -625,7 +772,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set @@ -642,76 +789,110 @@ CONFIG_SCSI_WAIT_SCAN=m # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y -# CONFIG_SATA_PMP is not set +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set -# CONFIG_ATA_SFF is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +CONFIG_ATA_PIIX=y +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ACPI is not set +# CONFIG_PATA_ALI is not set +CONFIG_PATA_AMD=y +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +CONFIG_PATA_OLDPIIX=y +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PCMCIA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_MD=y +# CONFIG_MD_LINEAR is not set +# CONFIG_MD_RAID0 is not set +# CONFIG_MD_RAID1 is not set +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID456 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y # CONFIG_DM_DEBUG is not set # CONFIG_DM_CRYPT is not set # CONFIG_DM_SNAPSHOT is not set -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set +CONFIG_DM_MIRROR=y +CONFIG_DM_ZERO=y # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set # CONFIG_DM_UEVENT is not set -CONFIG_FUSION=y -CONFIG_FUSION_SPI=y -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set -CONFIG_FUSION_MAX_SGE=128 -# CONFIG_FUSION_CTL is not set -# CONFIG_FUSION_LOGGING is not set +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set -CONFIG_IEEE1394=y - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# Controllers -# - -# -# Texas Instruments PCILynx requires I2C -# -CONFIG_IEEE1394_OHCI1394=y - -# -# Protocols -# -# CONFIG_IEEE1394_VIDEO1394 is not set -# CONFIG_IEEE1394_SBP2 is not set -# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set -# CONFIG_IEEE1394_ETH1394 is not set -# CONFIG_IEEE1394_DV1394 is not set -CONFIG_IEEE1394_RAWIO=y +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_MACINTOSH_DRIVERS=y -# CONFIG_MAC_EMUMOUSEBTN is not set +CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y -CONFIG_NETDEVICES_MULTIQUEUE=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_IFB is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set -CONFIG_TUN=y +# CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set @@ -722,18 +903,16 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y -CONFIG_VORTEX=y +# CONFIG_VORTEX is not set # CONFIG_TYPHOON is not set CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set -CONFIG_TULIP=y -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -# CONFIG_TULIP_NAPI is not set +# CONFIG_TULIP is not set # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set +# CONFIG_PCMCIA_XIRCOM is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set @@ -741,13 +920,9 @@ CONFIG_TULIP=y # CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set -CONFIG_AMD8111_ETH=y -# CONFIG_AMD8111E_NAPI is not set +# CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set -CONFIG_B44=y -CONFIG_B44_PCI_AUTOSELECT=y -CONFIG_B44_PCICORE_AUTOSELECT=y -CONFIG_B44_PCI=y +# CONFIG_B44 is not set CONFIG_FORCEDETH=y # CONFIG_FORCEDETH_NAPI is not set # CONFIG_EEPRO100 is not set @@ -755,9 +930,9 @@ CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set -CONFIG_8139CP=y +# CONFIG_8139CP is not set CONFIG_8139TOO=y -# CONFIG_8139TOO_PIO is not set +CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set @@ -783,10 +958,11 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set -# CONFIG_SKY2 is not set +CONFIG_SKY2=y +# CONFIG_SKY2_DEBUG is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y -CONFIG_BNX2=y +# CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set CONFIG_NETDEV_10000=y @@ -794,8 +970,7 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T3 is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set -CONFIG_S2IO=m -# CONFIG_S2IO_NAPI is not set +# CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -803,15 +978,44 @@ CONFIG_S2IO=m # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set # CONFIG_SFC is not set -# CONFIG_TR is not set +CONFIG_TR=y +# CONFIG_IBMOL is not set +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_LIBERTAS is not set +# CONFIG_AIRO is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +# CONFIG_ADM8211 is not set +# CONFIG_P54_COMMON is not set +CONFIG_ATH5K=y +# CONFIG_ATH5K_DEBUG is not set # CONFIG_IWLWIFI is not set +# CONFIG_IWLCORE is not set # CONFIG_IWLWIFI_LEDS is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set # # USB Network Adapters @@ -821,8 +1025,19 @@ CONFIG_S2IO=m # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +# CONFIG_PCMCIA_PCNET is not set +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set # CONFIG_WAN is not set -# CONFIG_FDDI is not set +CONFIG_FDDI=y +# CONFIG_DEFXX is not set +# CONFIG_SKFP is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -839,14 +1054,14 @@ CONFIG_NET_POLL_CONTROLLER=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_POLLDEV=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set @@ -874,17 +1089,62 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_JOYSTICK=y +# CONFIG_JOYSTICK_ANALOG is not set +# CONFIG_JOYSTICK_A3D is not set +# CONFIG_JOYSTICK_ADI is not set +# CONFIG_JOYSTICK_COBRA is not set +# CONFIG_JOYSTICK_GF2K is not set +# CONFIG_JOYSTICK_GRIP is not set +# CONFIG_JOYSTICK_GRIP_MP is not set +# CONFIG_JOYSTICK_GUILLEMOT is not set +# CONFIG_JOYSTICK_INTERACT is not set +# CONFIG_JOYSTICK_SIDEWINDER is not set +# CONFIG_JOYSTICK_TMDC is not set +# CONFIG_JOYSTICK_IFORCE is not set +# CONFIG_JOYSTICK_WARRIOR is not set +# CONFIG_JOYSTICK_MAGELLAN is not set +# CONFIG_JOYSTICK_SPACEORB is not set +# CONFIG_JOYSTICK_SPACEBALL is not set +# CONFIG_JOYSTICK_STINGER is not set +# CONFIG_JOYSTICK_TWIDJOY is not set +# CONFIG_JOYSTICK_ZHENHUA is not set +# CONFIG_JOYSTICK_JOYDUMP is not set +# CONFIG_JOYSTICK_XPAD is not set +CONFIG_INPUT_TABLET=y +# CONFIG_TABLET_USB_ACECAD is not set +# CONFIG_TABLET_USB_AIPTEK is not set +# CONFIG_TABLET_USB_GTCO is not set +# CONFIG_TABLET_USB_KBTAB is not set +# CONFIG_TABLET_USB_WACOM is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_PCSPKR is not set +# CONFIG_INPUT_APANEL is not set +# CONFIG_INPUT_ATLAS_BTNS is not set +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_UINPUT is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y @@ -897,9 +1157,25 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_DEVKMEM is not set -# CONFIG_SERIAL_NONSTANDARD is not set +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINK is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set +# CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_RIO is not set +# CONFIG_STALDRV is not set # CONFIG_NOZOMI is not set # @@ -910,9 +1186,14 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y -CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support @@ -921,28 +1202,78 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_INTEL=y -CONFIG_HW_RANDOM_AMD=y -# CONFIG_NVRAM is not set -CONFIG_RTC=y +# CONFIG_HW_RANDOM_INTEL is not set +# CONFIG_HW_RANDOM_AMD is not set +CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=256 +# CONFIG_RAW_DRIVER is not set CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set -CONFIG_HPET_MMAP=y +# CONFIG_HPET_MMAP is not set # CONFIG_HANGCHECK_TIMER is not set # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +CONFIG_I2C_I801=y +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y @@ -951,20 +1282,55 @@ CONFIG_POWER_SUPPLY=y # CONFIG_BATTERY_DS2760 is not set # CONFIG_HWMON is not set CONFIG_THERMAL=y -# CONFIG_WATCHDOG is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADVANTECH_WDT is not set +# CONFIG_ALIM1535_WDT is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_SC520_WDT is not set +# CONFIG_EUROTECH_WDT is not set +# CONFIG_IB700_WDT is not set +# CONFIG_IBMASR is not set +# CONFIG_WAFER_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_ITCO_WDT is not set +# CONFIG_IT8712F_WDT is not set +# CONFIG_HP_WATCHDOG is not set +# CONFIG_SC1200_WDT is not set +# CONFIG_PC87413_WDT is not set +# CONFIG_60XX_WDT is not set +# CONFIG_SBC8360_WDT is not set +# CONFIG_CPU5_WDT is not set +# CONFIG_SMSC37B787_WDT is not set +# CONFIG_W83627HF_WDT is not set +# CONFIG_W83697HF_WDT is not set +# CONFIG_W83877F_WDT is not set +# CONFIG_W83977F_WDT is not set +# CONFIG_MACHZ_WDT is not set +# CONFIG_SBC_EPX_C3_WATCHDOG is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set # # Sonics Silicon Backplane # CONFIG_SSB_POSSIBLE=y -CONFIG_SSB=y -CONFIG_SSB_SPROM=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -# CONFIG_SSB_B43_PCI_BRIDGE is not set -# CONFIG_SSB_DEBUG is not set -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_DRIVER_PCICORE=y +# CONFIG_SSB is not set # # Multifunction device drivers @@ -996,11 +1362,81 @@ CONFIG_AGP_AMD64=y CONFIG_AGP_INTEL=y # CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set -# CONFIG_DRM is not set +CONFIG_DRM=y +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_I810 is not set +# CONFIG_DRM_I830 is not set +CONFIG_DRM_I915=y +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_SIS is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ARC is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_VESA is not set +CONFIG_FB_EFI=y +# CONFIG_FB_IMAC is not set +# CONFIG_FB_N411 is not set +# CONFIG_FB_HGA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_LE80578 is not set +# CONFIG_FB_INTEL is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_GEODE is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set +# CONFIG_BACKLIGHT_PROGEAR is not set # # Display device support @@ -1012,9 +1448,14 @@ CONFIG_AGP_INTEL=y # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y -CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256 +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y # # Sound @@ -1024,35 +1465,165 @@ CONFIG_SOUND=y # # Advanced Linux Sound Architecture # -# CONFIG_SND is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_SEQ_DUMMY=y +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y + +# +# Generic devices +# +# CONFIG_SND_PCSP is not set +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5530 is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +CONFIG_SND_HDA_INTEL=y +CONFIG_SND_HDA_HWDEP=y +CONFIG_SND_HDA_CODEC_REALTEK=y +CONFIG_SND_HDA_CODEC_ANALOG=y +CONFIG_SND_HDA_CODEC_SIGMATEL=y +CONFIG_SND_HDA_CODEC_VIA=y +CONFIG_SND_HDA_CODEC_ATIHDMI=y +CONFIG_SND_HDA_CODEC_CONEXANT=y +CONFIG_SND_HDA_CODEC_CMEDIA=y +CONFIG_SND_HDA_CODEC_SI3054=y +CONFIG_SND_HDA_GENERIC=y +# CONFIG_SND_HDA_POWER_SAVE is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_USX2Y is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# ALSA SoC audio for Freescale SOCs +# + +# +# SoC Audio for the Texas Instruments OMAP +# # # Open Sound System # -CONFIG_SOUND_PRIME=y -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_OSS is not set +# CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set +CONFIG_HID_DEBUG=y CONFIG_HIDRAW=y # # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set +CONFIG_USB_HIDINPUT_POWERBOOK=y +CONFIG_HID_FF=y +CONFIG_HID_PID=y +CONFIG_LOGITECH_FF=y +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_PANTHERLORD_FF=y +CONFIG_THRUSTMASTER_FF=y +CONFIG_ZEROPLUS_FF=y +CONFIG_USB_HIDDEV=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options @@ -1060,7 +1631,7 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set +CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set # @@ -1073,7 +1644,6 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_HCD_SSB is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y @@ -1108,7 +1678,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_LIBUSUAL is not set +CONFIG_USB_LIBUSUAL=y # # USB Imaging devices @@ -1148,11 +1718,78 @@ CONFIG_USB_MON=y # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_CLEVO_MAIL is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -# CONFIG_RTC_CLASS is not set +CONFIG_EDAC=y + +# +# Reporting subsystems +# +# CONFIG_EDAC_DEBUG is not set +# CONFIG_EDAC_MM_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# CONFIG_DMADEVICES=y # @@ -1165,6 +1802,7 @@ CONFIG_DMADEVICES=y # Firmware Drivers # # CONFIG_EDD is not set +CONFIG_EFI_VARS=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y @@ -1173,25 +1811,16 @@ CONFIG_DMIID=y # # File systems # -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y -# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -# CONFIG_REISERFS_FS_SECURITY is not set +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set @@ -1200,7 +1829,12 @@ CONFIG_FS_POSIX_ACL=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1211,7 +1845,7 @@ CONFIG_GENERIC_ACL=y # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set +CONFIG_ZISOFS=y # CONFIG_UDF_FS is not set # @@ -1229,6 +1863,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_VMCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y @@ -1242,6 +1877,7 @@ CONFIG_HUGETLB_PAGE=y # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -1255,15 +1891,38 @@ CONFIG_HUGETLB_PAGE=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NETWORK_FILESYSTEMS is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set # # Partition Types # -# CONFIG_PARTITION_ADVANCED is not set +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_LDM_PARTITION is not set +CONFIG_SGI_PARTITION=y +# CONFIG_ULTRIX_PARTITION is not set +CONFIG_SUN_PARTITION=y +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set @@ -1298,7 +1957,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y @@ -1309,21 +1968,22 @@ CONFIG_NLS_UTF8=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y -CONFIG_UNUSED_SYMBOLS=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set +CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y # CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1340,7 +2000,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -# CONFIG_FRAME_POINTER is not set +CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_KPROBES_SANITY_TEST is not set @@ -1348,20 +2008,21 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set -# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set +CONFIG_PROVIDE_OHCI1394_DMA_INIT=y # CONFIG_SAMPLES is not set # CONFIG_KGDB is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_NONPROMISC_DEVMEM is not set CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUG_PER_CPU_MAPS is not set # CONFIG_X86_PTDUMP is not set -# CONFIG_DEBUG_RODATA is not set +CONFIG_DEBUG_RODATA=y # CONFIG_DIRECT_GBPAGES is not set -# CONFIG_DEBUG_NX_TEST is not set +# CONFIG_DEBUG_RODATA_TEST is not set +CONFIG_DEBUG_NX_TEST=m CONFIG_X86_MPPARSE=y # CONFIG_IOMMU_DEBUG is not set CONFIG_IO_DELAY_TYPE_0X80=0 @@ -1373,18 +2034,115 @@ CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 -# CONFIG_DEBUG_BOOT_PARAMS is not set +CONFIG_DEBUG_BOOT_PARAMS=y # CONFIG_CPA_DEBUG is not set # # Security options # -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set -# CONFIG_HAVE_KVM is not set -# CONFIG_VIRTUALIZATION is not set +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK=y +# CONFIG_SECURITY_NETWORK_XFRM is not set +CONFIG_SECURITY_CAPABILITIES=y +CONFIG_SECURITY_FILE_CAPABILITIES=y +# CONFIG_SECURITY_ROOTPLUG is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536 +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set +# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set +# CONFIG_SECURITY_SMACK is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_AES_X86_64 is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SALSA20_X86_64 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_TWOFISH_X86_64 is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_HAVE_KVM=y +CONFIG_VIRTUALIZATION=y # CONFIG_KVM is not set # CONFIG_VIRTIO_PCI is not set # CONFIG_VIRTIO_BALLOON is not set From 205f93288093df69f9ab5f6981aef27b91088b28 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Mon, 5 May 2008 17:52:52 -0400 Subject: [PATCH 046/821] x86: add new cache descriptor The latest rev of Intel doc AP-485 details a new cache descriptor that we don't yet support. A 6MB 24-way assoc L2 cache. Signed-off-by: Dave Jones Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/intel_cacheinfo.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 26d615dcb149..2c8afafa18e8 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -62,6 +62,7 @@ static struct _cache_table cache_table[] __cpuinitdata = { 0x4b, LVL_3, 8192 }, /* 16-way set assoc, 64 byte line size */ { 0x4c, LVL_3, 12288 }, /* 12-way set assoc, 64 byte line size */ { 0x4d, LVL_3, 16384 }, /* 16-way set assoc, 64 byte line size */ + { 0x4e, LVL_2, 6144 }, /* 24-way set assoc, 64 byte line size */ { 0x60, LVL_1_DATA, 16 }, /* 8-way set assoc, sectored cache, 64 byte line size */ { 0x66, LVL_1_DATA, 8 }, /* 4-way set assoc, sectored cache, 64 byte line size */ { 0x67, LVL_1_DATA, 16 }, /* 4-way set assoc, sectored cache, 64 byte line size */ From 0327318445d55808991a63137cfb698a90ab6adf Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 18 Apr 2008 17:49:15 -0700 Subject: [PATCH 047/821] x86_64: simplify the memtest parameter setting use CONFIG_MEMTEST only. if it is set, will have memtest=0 (disabled) need to have memtest=4 in command line to test more patterns. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 30 +++++++----------------------- arch/x86/mm/init_64.c | 5 +++-- 2 files changed, 10 insertions(+), 25 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index fe361ae7ef2f..a1a9021146bc 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -419,35 +419,19 @@ config PARAVIRT endif -config MEMTEST_BOOTPARAM - bool "Memtest boot parameter" +config MEMTEST + bool "Memtest" depends on X86_64 default y help This option adds a kernel parameter 'memtest', which allows memtest - to be disabled at boot. If this option is selected, memtest - functionality can be disabled with memtest=0 on the kernel - command line. The purpose of this option is to allow a single - kernel image to be distributed with memtest built in, but not - necessarily enabled. - + to be set. + memtest=0, mean disabled; -- default + memtest=1, mean do 1 test pattern; + ... + memtest=4, mean do 4 test patterns. If you are unsure how to answer this question, answer Y. -config MEMTEST_BOOTPARAM_VALUE - int "Memtest boot parameter default value (0-4)" - depends on MEMTEST_BOOTPARAM - range 0 4 - default 0 - help - This option sets the default value for the kernel parameter - 'memtest', which allows memtest to be disabled at boot. If this - option is set to 0 (zero), the memtest kernel parameter will - default to 0, disabling memtest at bootup. If this option is - set to 4, the memtest kernel parameter will default to 4, - enabling memtest at bootup, and use that as pattern number. - - If you are unsure how to answer this question, answer 0. - config ACPI_SRAT def_bool y depends on X86_32 && ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH) diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 32ba13b0f818..c6d81316db65 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -431,7 +431,7 @@ static void __init init_gbpages(void) direct_gbpages = 0; } -#ifdef CONFIG_MEMTEST_BOOTPARAM +#ifdef CONFIG_MEMTEST static void __init memtest(unsigned long start_phys, unsigned long size, unsigned pattern) @@ -493,7 +493,8 @@ static void __init memtest(unsigned long start_phys, unsigned long size, } -static int memtest_pattern __initdata = CONFIG_MEMTEST_BOOTPARAM_VALUE; +/* default is disabled */ +static int memtest_pattern __initdata; static int __init parse_memtest(char *arg) { From dedd4915af40cff6614707c50dcae43d17beadec Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sat, 17 May 2008 08:28:33 +0200 Subject: [PATCH 048/821] bitops: fix build in struct thread_info we can move flags from u32 to natural size - assembly code uses offsetof. Signed-off-by: Ingo Molnar --- include/asm-x86/thread_info.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index 74481b72ae0f..25d710532561 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -24,10 +24,10 @@ struct exec_domain; struct thread_info { struct task_struct *task; /* main task structure */ struct exec_domain *exec_domain; /* execution domain */ - __u32 flags; /* low level flags */ + unsigned long flags; /* low level flags */ __u32 status; /* thread synchronous flags */ __u32 cpu; /* current CPU */ - int preempt_count; /* 0 => preemptable, + int preempt_count; /* 0 => preemptable, <0 => BUG */ mm_segment_t addr_limit; struct restart_block restart_block; From b9ada4281c48076bdb252813be24ddb57e17cade Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Tue, 20 May 2008 11:01:08 +0100 Subject: [PATCH 049/821] x86: reinstate numa remap for SPARSEMEM on x86 NUMA systems Recent kernels have been panic'ing trying to allocate memory early in boot, in __alloc_pages: BUG: unable to handle kernel paging request at 00001568 IP: [] __alloc_pages+0x33/0x2cc *pdpt = 00000000013a5001 *pde = 0000000000000000 Oops: 0000 [#1] SMP Modules linked in: Pid: 1, comm: swapper Not tainted (2.6.25 #78) EIP: 0060:[] EFLAGS: 00010246 CPU: 0 EIP is at __alloc_pages+0x33/0x2cc EAX: 00001564 EBX: 000412d0 ECX: 00001564 EDX: 000005c3 ESI: f78012a0 EDI: 00000001 EBP: 00001564 ESP: f7871e50 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 1, ti=f7870000 task=f786f670 task.ti=f7870000) Stack: 00000000 f786f670 00000010 00000000 0000b700 000412d0 f78012a0 00000001 00000000 c105b64d 00000000 000412d0 f78012a0 f7803120 00000000 c105c1c5 00000010 f7803144 000412d0 00000001 f7803130 f7803120 f78012a0 00000001 Call Trace: [] kmem_getpages+0x94/0x129 [] cache_grow+0x8f/0x123 [] ____cache_alloc_node+0xb9/0xe4 [] kmem_cache_alloc_node+0x92/0xd2 [] build_sched_domains+0x536/0x70d [] do_flush_tlb_all+0x0/0x3f [] do_flush_tlb_all+0x0/0x3f [] interleave_nodes+0x23/0x5a [] alternate_node_alloc+0x43/0x5b [] arch_init_sched_domains+0x46/0x51 [] kernel_init+0x0/0x82 [] sched_init_smp+0x10/0xbb [] kernel_init+0x43/0x82 [] kernel_thread_helper+0x7/0x10 Debugging this showed that the NODE_DATA() for nodes other than node 0 were all NULL. Tracing this back showed that the NODE_DATA() pointers were being initialised to each nodes remap space. However under SPARSEMEM remap is disabled which leads to the pgdat's being placed incorrectly at kernel virtual address 0. Leading to the panic when attempting to allocate memory from these nodes. Numa remap was disabled in the commit below. This occured while fixing problems triggered when attempting to boot x86_32 NUMA SPARSEMEM kernels on non-numa hardware. x86: make NUMA work on 32-bit commit 1b000a5dbeb2f34bc03d45ebdf3f6d24a60c3aed The real problem is believed to be related to other alignment issues in the regions blocked out from the bootmem allocator for small memory systems, and has been fixed separately. Therefore re-enable remap for SPARSMEM, which fixes pgdat allocation issues. Testing confirms that SPARSMEM NUMA kernels will boot correctly with this part of the change reverted. Signed-off-by: Andy Whitcroft Acked-by: Mel Gorman Signed-off-by: Ingo Molnar --- arch/x86/mm/discontig_32.c | 34 ++++++---------------------------- 1 file changed, 6 insertions(+), 28 deletions(-) diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index 914ccf983687..026201f143a8 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -164,16 +164,13 @@ static void __init allocate_pgdat(int nid) } } -#ifdef CONFIG_DISCONTIGMEM /* - * In the discontig memory model, a portion of the kernel virtual area (KVA) - * is reserved and portions of nodes are mapped using it. This is to allow - * node-local memory to be allocated for structures that would normally require - * ZONE_NORMAL. The memory is allocated with alloc_remap() and callers - * should be prepared to allocate from the bootmem allocator instead. This KVA - * mechanism is incompatible with SPARSEMEM as it makes assumptions about the - * layout of memory that are broken if alloc_remap() succeeds for some of the - * map and fails for others + * In the DISCONTIGMEM and SPARSEMEM memory model, a portion of the kernel + * virtual address space (KVA) is reserved and portions of nodes are mapped + * using it. This is to allow node-local memory to be allocated for + * structures that would normally require ZONE_NORMAL. The memory is + * allocated with alloc_remap() and callers should be prepared to allocate + * from the bootmem allocator instead. */ static unsigned long node_remap_start_pfn[MAX_NUMNODES]; static void *node_remap_end_vaddr[MAX_NUMNODES]; @@ -290,25 +287,6 @@ static void init_remap_allocator(int nid) (ulong) pfn_to_kaddr(highstart_pfn + node_remap_offset[nid] + node_remap_size[nid])); } -#else -void *alloc_remap(int nid, unsigned long size) -{ - return NULL; -} - -static unsigned long calculate_numa_remap_pages(void) -{ - return 0; -} - -static void init_remap_allocator(int nid) -{ -} - -void __init remap_numa_kva(void) -{ -} -#endif /* CONFIG_DISCONTIGMEM */ extern void setup_bootmem_allocator(void); unsigned long __init setup_memory(void) From 84d6bd0e272e6eace1e7e4c501f32bddfb665bb2 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Tue, 20 May 2008 11:01:19 +0100 Subject: [PATCH 050/821] x86: cope with no remap space being allocated for a numa node When allocating the pgdat's for numa nodes on x86_32 we attempt to place them in the numa remap space for that node. However should the node not have any remap space allocated (such as due to having non-ram pages in the remap location in the node) then we will incorrectly place the pgdat at zero. Check we have remap available, falling back to node 0 memory where we do not. Signed-off-by: Andy Whitcroft Acked-by: Mel Gorman Signed-off-by: Ingo Molnar --- arch/x86/mm/discontig_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index 026201f143a8..435c343c14bc 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -156,7 +156,7 @@ static void __init propagate_e820_map_node(int nid) */ static void __init allocate_pgdat(int nid) { - if (nid && node_has_online_mem(nid)) + if (nid && node_has_online_mem(nid) && node_remap_start_vaddr[nid]) NODE_DATA(nid) = (pg_data_t *)node_remap_start_vaddr[nid]; else { NODE_DATA(nid) = (pg_data_t *)(pfn_to_kaddr(min_low_pfn)); From 0abbc78a0137fee60ef092f0b20a3d3d7e7e0cc2 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Tue, 20 May 2008 16:27:17 +0200 Subject: [PATCH 051/821] x86, aperture_64: use symbolic constants Factor-out common aperture_valid code. Signed-off-by: Pavel Machek Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/aperture_64.c | 23 +---------------------- drivers/char/agp/amd64-agp.c | 22 ++++------------------ include/asm-x86/gart.h | 24 ++++++++++++++++++++++++ 3 files changed, 29 insertions(+), 40 deletions(-) diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 02f4dbaa4df4..5373f7834d8a 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -109,27 +109,6 @@ static u32 __init allocate_aperture(void) return (u32)__pa(p); } -static int __init aperture_valid(u64 aper_base, u32 aper_size, u32 min_size) -{ - if (!aper_base) - return 0; - - if (aper_base + aper_size > 0x100000000UL) { - printk(KERN_ERR "Aperture beyond 4GB. Ignoring.\n"); - return 0; - } - if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) { - printk(KERN_ERR "Aperture pointing to e820 RAM. Ignoring.\n"); - return 0; - } - if (aper_size < min_size) { - printk(KERN_ERR "Aperture too small (%d MB) than (%d MB)\n", - aper_size>>20, min_size>>20); - return 0; - } - - return 1; -} /* Find a PCI capability */ static __u32 __init find_cap(int bus, int slot, int func, int cap) @@ -344,7 +323,7 @@ out: if (gart_fix_e820 && !fix && aper_enabled) { if (!e820_all_mapped(aper_base, aper_base + aper_size, E820_RESERVED)) { - /* reserved it, so we can resuse it in second kernel */ + /* reserve it, so we can reuse it in second kernel */ printk(KERN_INFO "update e820 for GART\n"); add_memory_region(aper_base, aper_size, E820_RESERVED); update_e820(); diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index e3c7ea07f57c..f5af65ac8c78 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -228,24 +228,10 @@ static const struct agp_bridge_driver amd_8151_driver = { }; /* Some basic sanity checks for the aperture. */ -static int __devinit aperture_valid(u64 aper, u32 size) +static int __devinit agp_aperture_valid(u64 aper, u32 size) { - if (aper == 0) { - printk(KERN_ERR PFX "No aperture\n"); + if (!aperture_valid(aper, size, 32*1024*1024)) return 0; - } - if ((u64)aper + size > 0x100000000ULL) { - printk(KERN_ERR PFX "Aperture out of bounds\n"); - return 0; - } - if (e820_any_mapped(aper, aper + size, E820_RAM)) { - printk(KERN_ERR PFX "Aperture pointing to RAM\n"); - return 0; - } - if (size < 32*1024*1024) { - printk(KERN_ERR PFX "Aperture too small (%d MB)\n", size>>20); - return 0; - } /* Request the Aperture. This catches cases when someone else already put a mapping in there - happens with some very broken BIOS @@ -282,7 +268,7 @@ static __devinit int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp, nb_order = (nb_order >> 1) & 7; pci_read_config_dword(nb, AMD64_GARTAPERTUREBASE, &nb_base); nb_aper = nb_base << 25; - if (aperture_valid(nb_aper, (32*1024*1024)< + extern void pci_iommu_shutdown(void); extern void no_iommu_init(void); extern int force_iommu, no_iommu; @@ -69,4 +71,26 @@ static inline void enable_gart_translation(struct pci_dev *dev, u64 addr) pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); } +static inline int aperture_valid(u64 aper_base, u32 aper_size, u32 min_size) +{ + if (!aper_base) + return 0; + + if (aper_base + aper_size > 0x100000000ULL) { + printk(KERN_ERR "Aperture beyond 4GB. Ignoring.\n"); + return 0; + } + if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) { + printk(KERN_ERR "Aperture pointing to e820 RAM. Ignoring.\n"); + return 0; + } + if (aper_size < min_size) { + printk(KERN_ERR "Aperture too small (%d MB) than (%d MB)\n", + aper_size>>20, min_size>>20); + return 0; + } + + return 1; +} + #endif From 0748aca6f0af917591dcfd70dccac770a25d4f71 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 13 May 2008 10:34:20 +0200 Subject: [PATCH 052/821] x86: remove useless static current_tsc_khz variable current_tsc_khz is just written by the init code and never used again. Remove it. Signed-off-by: Thomas Gleixner --- arch/x86/kernel/tsc_32.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c index e4790728b224..d53b1040cbb7 100644 --- a/arch/x86/kernel/tsc_32.c +++ b/arch/x86/kernel/tsc_32.c @@ -283,7 +283,6 @@ core_initcall(cpufreq_tsc); /* clock source code */ -static unsigned long current_tsc_khz; static struct clocksource clocksource_tsc; /* @@ -434,9 +433,8 @@ void __init tsc_init(void) unsynchronized_tsc(); check_geode_tsc_reliable(); - current_tsc_khz = tsc_khz; - clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz, - clocksource_tsc.shift); + clocksource_tsc.mult = clocksource_khz2mult(tsc_khz, + clocksource_tsc.shift); /* lower the rating if we already know its unstable: */ if (check_tsc_unstable()) { clocksource_tsc.rating = 0; From 3843fc2575e3389f4f0ad0420a720240a5746a5d Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Fri, 9 May 2008 12:05:57 +0100 Subject: [PATCH 053/821] xen: remove support for non-PAE 32-bit Non-PAE operation has been deprecated in Xen for a while, and is rarely tested or used. xen-unstable has now officially dropped non-PAE support. Since Xen/pvops' non-PAE support has also been broken for a while, we may as well completely drop it altogether. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/xen/Kconfig | 2 +- arch/x86/xen/enlighten.c | 51 ++++++++++++++------------------------ arch/x86/xen/mmu.c | 19 ++------------ arch/x86/xen/mmu.h | 24 +++++------------- arch/x86/xen/xen-head.S | 4 --- include/asm-x86/xen/page.h | 4 --- 6 files changed, 27 insertions(+), 77 deletions(-) diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig index 2e641be2737e..525b108411bd 100644 --- a/arch/x86/xen/Kconfig +++ b/arch/x86/xen/Kconfig @@ -6,7 +6,7 @@ config XEN bool "Xen guest support" select PARAVIRT depends on X86_32 - depends on X86_CMPXCHG && X86_TSC && !(X86_VISWS || X86_VOYAGER) + depends on X86_CMPXCHG && X86_TSC && X86_PAE && !(X86_VISWS || X86_VOYAGER) help This is the Linux Xen port. Enabling this will allow the kernel to boot in a paravirtualized environment under the diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index c8a56e457d61..a05b7721bc81 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -785,38 +785,35 @@ static __init void xen_set_pte_init(pte_t *ptep, pte_t pte) static __init void xen_pagetable_setup_start(pgd_t *base) { pgd_t *xen_pgd = (pgd_t *)xen_start_info->pt_base; + int i; /* special set_pte for pagetable initialization */ pv_mmu_ops.set_pte = xen_set_pte_init; init_mm.pgd = base; /* - * copy top-level of Xen-supplied pagetable into place. For - * !PAE we can use this as-is, but for PAE it is a stand-in - * while we copy the pmd pages. + * copy top-level of Xen-supplied pagetable into place. This + * is a stand-in while we copy the pmd pages. */ memcpy(base, xen_pgd, PTRS_PER_PGD * sizeof(pgd_t)); - if (PTRS_PER_PMD > 1) { - int i; - /* - * For PAE, need to allocate new pmds, rather than - * share Xen's, since Xen doesn't like pmd's being - * shared between address spaces. - */ - for (i = 0; i < PTRS_PER_PGD; i++) { - if (pgd_val_ma(xen_pgd[i]) & _PAGE_PRESENT) { - pmd_t *pmd = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE); + /* + * For PAE, need to allocate new pmds, rather than + * share Xen's, since Xen doesn't like pmd's being + * shared between address spaces. + */ + for (i = 0; i < PTRS_PER_PGD; i++) { + if (pgd_val_ma(xen_pgd[i]) & _PAGE_PRESENT) { + pmd_t *pmd = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE); - memcpy(pmd, (void *)pgd_page_vaddr(xen_pgd[i]), - PAGE_SIZE); + memcpy(pmd, (void *)pgd_page_vaddr(xen_pgd[i]), + PAGE_SIZE); - make_lowmem_page_readonly(pmd); + make_lowmem_page_readonly(pmd); - set_pgd(&base[i], __pgd(1 + __pa(pmd))); - } else - pgd_clear(&base[i]); - } + set_pgd(&base[i], __pgd(1 + __pa(pmd))); + } else + pgd_clear(&base[i]); } /* make sure zero_page is mapped RO so we can use it in pagetables */ @@ -873,17 +870,7 @@ static __init void xen_pagetable_setup_done(pgd_t *base) /* Actually pin the pagetable down, but we can't set PG_pinned yet because the page structures don't exist yet. */ - { - unsigned level; - -#ifdef CONFIG_X86_PAE - level = MMUEXT_PIN_L3_TABLE; -#else - level = MMUEXT_PIN_L2_TABLE; -#endif - - pin_pagetable_pfn(level, PFN_DOWN(__pa(base))); - } + pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(base))); } /* This is called once we have the cpu_possible_map */ @@ -1093,7 +1080,6 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .make_pte = xen_make_pte, .make_pgd = xen_make_pgd, -#ifdef CONFIG_X86_PAE .set_pte_atomic = xen_set_pte_atomic, .set_pte_present = xen_set_pte_at, .set_pud = xen_set_pud, @@ -1102,7 +1088,6 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .make_pmd = xen_make_pmd, .pmd_val = xen_pmd_val, -#endif /* PAE */ .activate_mm = xen_activate_mm, .dup_mmap = xen_dup_mmap, diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 126766d43aea..07c2653ec335 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -222,7 +222,7 @@ pmdval_t xen_pmd_val(pmd_t pmd) ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT; return ret; } -#ifdef CONFIG_X86_PAE + void xen_set_pud(pud_t *ptr, pud_t val) { struct multicall_space mcs; @@ -272,12 +272,6 @@ pmd_t xen_make_pmd(pmdval_t pmd) return native_make_pmd(pmd); } -#else /* !PAE */ -void xen_set_pte(pte_t *ptep, pte_t pte) -{ - *ptep = pte; -} -#endif /* CONFIG_X86_PAE */ /* (Yet another) pagetable walker. This one is intended for pinning a @@ -430,8 +424,6 @@ static int pin_page(struct page *page, enum pt_level level) read-only, and can be pinned. */ void xen_pgd_pin(pgd_t *pgd) { - unsigned level; - xen_mc_batch(); if (pgd_walk(pgd, pin_page, TASK_SIZE)) { @@ -441,14 +433,7 @@ void xen_pgd_pin(pgd_t *pgd) xen_mc_batch(); } -#ifdef CONFIG_X86_PAE - level = MMUEXT_PIN_L3_TABLE; -#else - level = MMUEXT_PIN_L2_TABLE; -#endif - - xen_do_pin(level, PFN_DOWN(__pa(pgd))); - + xen_do_pin(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(pgd))); xen_mc_issue(0); } diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h index b5e189b1519d..5fe961caffd4 100644 --- a/arch/x86/xen/mmu.h +++ b/arch/x86/xen/mmu.h @@ -37,14 +37,13 @@ void xen_exit_mmap(struct mm_struct *mm); void xen_pgd_pin(pgd_t *pgd); //void xen_pgd_unpin(pgd_t *pgd); -#ifdef CONFIG_X86_PAE -unsigned long long xen_pte_val(pte_t); -unsigned long long xen_pmd_val(pmd_t); -unsigned long long xen_pgd_val(pgd_t); +pteval_t xen_pte_val(pte_t); +pmdval_t xen_pmd_val(pmd_t); +pgdval_t xen_pgd_val(pgd_t); -pte_t xen_make_pte(unsigned long long); -pmd_t xen_make_pmd(unsigned long long); -pgd_t xen_make_pgd(unsigned long long); +pte_t xen_make_pte(pteval_t); +pmd_t xen_make_pmd(pmdval_t); +pgd_t xen_make_pgd(pgdval_t); void xen_set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval); @@ -53,15 +52,4 @@ void xen_set_pud(pud_t *ptr, pud_t val); void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep); void xen_pmd_clear(pmd_t *pmdp); - -#else -unsigned long xen_pte_val(pte_t); -unsigned long xen_pmd_val(pmd_t); -unsigned long xen_pgd_val(pgd_t); - -pte_t xen_make_pte(unsigned long); -pmd_t xen_make_pmd(unsigned long); -pgd_t xen_make_pgd(unsigned long); -#endif - #endif /* _XEN_MMU_H */ diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S index 288d587ce73c..2ab5f42f34d8 100644 --- a/arch/x86/xen/xen-head.S +++ b/arch/x86/xen/xen-head.S @@ -30,11 +30,7 @@ ENTRY(hypercall_page) ELFNOTE(Xen, XEN_ELFNOTE_ENTRY, .long startup_xen) ELFNOTE(Xen, XEN_ELFNOTE_HYPERCALL_PAGE, .long hypercall_page) ELFNOTE(Xen, XEN_ELFNOTE_FEATURES, .asciz "!writable_page_tables|pae_pgdir_above_4gb") -#ifdef CONFIG_X86_PAE ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz "yes") -#else - ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz "no") -#endif ELFNOTE(Xen, XEN_ELFNOTE_LOADER, .asciz "generic") #endif /*CONFIG_XEN */ diff --git a/include/asm-x86/xen/page.h b/include/asm-x86/xen/page.h index baf3a4dce28c..e11f24038b1d 100644 --- a/include/asm-x86/xen/page.h +++ b/include/asm-x86/xen/page.h @@ -150,13 +150,9 @@ static inline pte_t __pte_ma(pteval_t x) return (pte_t) { .pte = x }; } -#ifdef CONFIG_X86_PAE #define pmd_val_ma(v) ((v).pmd) #define pud_val_ma(v) ((v).pgd.pgd) #define __pmd_ma(x) ((pmd_t) { (x) } ) -#else /* !X86_PAE */ -#define pmd_val_ma(v) ((v).pud.pgd.pgd) -#endif /* CONFIG_X86_PAE */ #define pgd_val_ma(x) ((x).pgd) From b478458aeebfc55fe409abec43794ac72a623c79 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 12 May 2008 15:44:39 +0200 Subject: [PATCH 054/821] x86: avoid re-loading LDT in unrelated address spaces Performance optimization. Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/ldt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c index 0224c3637c73..21f2bae98c15 100644 --- a/arch/x86/kernel/ldt.c +++ b/arch/x86/kernel/ldt.c @@ -20,9 +20,9 @@ #include #ifdef CONFIG_SMP -static void flush_ldt(void *null) +static void flush_ldt(void *current_mm) { - if (current->active_mm) + if (current->active_mm == current_mm) load_LDT(¤t->active_mm->context); } #endif @@ -68,7 +68,7 @@ static int alloc_ldt(mm_context_t *pc, int mincount, int reload) load_LDT(pc); mask = cpumask_of_cpu(smp_processor_id()); if (!cpus_equal(current->mm->cpu_vm_mask, mask)) - smp_call_function(flush_ldt, NULL, 1, 1); + smp_call_function(flush_ldt, current->mm, 1, 1); preempt_enable(); #else load_LDT(pc); From 873b274a41c0cfe58b2eb0a7722424eb367b905b Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 22 May 2008 13:02:23 -0400 Subject: [PATCH 055/821] x86: Add Centaur and Transmeta CPUs to PAT whitelist Unconditionally enable PAT support on Centaur and Transmeta CPUs. All known models that advertise PAT have no known errata. Signed-off-by: Dave Jones Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/addon_cpuid_features.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c index c2e1ce33c7cb..d8b3e4a9d663 100644 --- a/arch/x86/kernel/cpu/addon_cpuid_features.c +++ b/arch/x86/kernel/cpu/addon_cpuid_features.c @@ -62,6 +62,9 @@ void __cpuinit validate_pat_support(struct cpuinfo_x86 *c) if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15)) return; break; + case X86_VENDOR_CENTAUR: + case X86_VENDOR_TRANSMETA: + return; } pat_disable(cpu_has_pat ? From c3ed64295f0fed9131b42122234b1ce4a4a266cf Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Fri, 16 May 2008 10:44:39 -0700 Subject: [PATCH 056/821] x86: change maximum NR_CPUS to 4096 and MAX_NUMNODES to 512 * Change the range of NR_CPUS from 2-255 to 2-4096 and change the range of MAX_NUMNODES (NODES_SHIFT) from 1-32768 to 1-512. * Alter comment about how much each increment of NR_CPUS consumes. (This was found by configuring for 256 cpus and then 512 cpus and dividing the difference by 256.) Signed-off-by: Mike Travis Cc: Andrew Morton Cc: Dave Jones Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index fe361ae7ef2f..bbafeac89116 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -565,18 +565,18 @@ config IOMMU_HELPER def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB) config NR_CPUS - int "Maximum number of CPUs (2-255)" - range 2 255 + int "Maximum number of CPUs (2-4096)" + range 2 4096 depends on SMP default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000 default "8" help This allows you to specify the maximum number of CPUs which this - kernel will support. The maximum supported value is 255 and the + kernel will support. The maximum supported value is 4096 and the minimum value which makes sense is 2. This is purely to save memory - each supported CPU adds - approximately eight kilobytes to the kernel image. + approximately one kilobyte to the kernel image. config SCHED_SMT bool "SMT (Hyperthreading) scheduler support" @@ -968,8 +968,8 @@ config NUMA_EMU number of nodes. This is only useful for debugging. config NODES_SHIFT - int "Max num nodes shift(1-15)" - range 1 15 if X86_64 + int "Max num nodes shift(1-9)" + range 1 9 if X86_64 default "6" if X86_64 default "4" if X86_NUMAQ default "3" From 40bd21740012132afb62d78ac3e6b82372b2fbc2 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 21 May 2008 11:44:02 +0200 Subject: [PATCH 057/821] x86: automatical unification of i8259.c Make conversion of i8259 very mechanical -- i8259 was generated by --- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/i8259.c | 368 +++++++++++++++++++++++++++++++++++++ arch/x86/kernel/i8259_32.c | 295 ----------------------------- arch/x86/kernel/i8259_64.c | 309 ------------------------------- include/asm-x86/i8259.h | 2 + 5 files changed, 371 insertions(+), 605 deletions(-) create mode 100644 arch/x86/kernel/i8259.c diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 5e618c3b4720..f71a76ef2596 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -18,7 +18,7 @@ CFLAGS_tsc_64.o := $(nostackp) obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o obj-y += traps_$(BITS).o irq_$(BITS).o obj-y += time_$(BITS).o ioport.o ldt.o -obj-y += setup_$(BITS).o i8259_$(BITS).o setup.o +obj-y += setup_$(BITS).o i8259.o i8259_$(BITS).o setup.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c new file mode 100644 index 000000000000..2decba6b0101 --- /dev/null +++ b/arch/x86/kernel/i8259.c @@ -0,0 +1,368 @@ +#ifdef CONFIG_X86_64 +#include +#endif /* CONFIG_X86_64 */ +#include +#include +#include +#include +#include +#ifdef CONFIG_X86_64 +#include +#endif /* CONFIG_X86_64 */ +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_X86_64 +#include +#endif /* CONFIG_X86_64 */ +#include +#include +#include +#ifndef CONFIG_X86_64 +#include +#else /* CONFIG_X86_64 */ +#include +#endif /* CONFIG_X86_64 */ +#include +#include +#include +#include +#ifndef CONFIG_X86_64 +#include +#endif /* ! CONFIG_X86_64 */ +#include + +/* + * This is the 'legacy' 8259A Programmable Interrupt Controller, + * present in the majority of PC/AT boxes. + * plus some generic x86 specific things if generic specifics makes + * any sense at all. + */ + +static int i8259A_auto_eoi; +DEFINE_SPINLOCK(i8259A_lock); +static void mask_and_ack_8259A(unsigned int); + +struct irq_chip i8259A_chip = { + .name = "XT-PIC", + .mask = disable_8259A_irq, + .disable = disable_8259A_irq, + .unmask = enable_8259A_irq, + .mask_ack = mask_and_ack_8259A, +}; + +/* + * 8259A PIC functions to handle ISA devices: + */ + +/* + * This contains the irq mask for both 8259A irq controllers, + */ +unsigned int cached_irq_mask = 0xffff; + +/* + * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) + * boards the timer interrupt is not really connected to any IO-APIC pin, + * it's fed to the master 8259A's IR0 line only. + * + * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. + * this 'mixed mode' IRQ handling costs nothing because it's only used + * at IRQ setup time. + */ +unsigned long io_apic_irqs; + +void disable_8259A_irq(unsigned int irq) +{ + unsigned int mask = 1 << irq; + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + cached_irq_mask |= mask; + if (irq & 8) + outb(cached_slave_mask, PIC_SLAVE_IMR); + else + outb(cached_master_mask, PIC_MASTER_IMR); + spin_unlock_irqrestore(&i8259A_lock, flags); +} + +void enable_8259A_irq(unsigned int irq) +{ + unsigned int mask = ~(1 << irq); + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + cached_irq_mask &= mask; + if (irq & 8) + outb(cached_slave_mask, PIC_SLAVE_IMR); + else + outb(cached_master_mask, PIC_MASTER_IMR); + spin_unlock_irqrestore(&i8259A_lock, flags); +} + +int i8259A_irq_pending(unsigned int irq) +{ + unsigned int mask = 1<> 8); + spin_unlock_irqrestore(&i8259A_lock, flags); + + return ret; +} + +void make_8259A_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + io_apic_irqs &= ~(1<> 8); + outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ + return value; +} + +/* + * Careful! The 8259A is a fragile beast, it pretty + * much _has_ to be done exactly like this (mask it + * first, _then_ send the EOI, and the order of EOI + * to the two 8259s is important! + */ +static void mask_and_ack_8259A(unsigned int irq) +{ + unsigned int irqmask = 1 << irq; + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + /* + * Lightweight spurious IRQ detection. We do not want + * to overdo spurious IRQ handling - it's usually a sign + * of hardware problems, so we only do the checks we can + * do without slowing down good hardware unnecessarily. + * + * Note that IRQ7 and IRQ15 (the two spurious IRQs + * usually resulting from the 8259A-1|2 PICs) occur + * even if the IRQ is masked in the 8259A. Thus we + * can check spurious 8259A IRQs without doing the + * quite slow i8259A_irq_real() call for every IRQ. + * This does not cover 100% of spurious interrupts, + * but should be enough to warn the user that there + * is something bad going on ... + */ + if (cached_irq_mask & irqmask) + goto spurious_8259A_irq; + cached_irq_mask |= irqmask; + +handle_real_irq: + if (irq & 8) { + inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ + outb(cached_slave_mask, PIC_SLAVE_IMR); +#ifndef CONFIG_X86_64 + outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ + outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ +#else /* CONFIG_X86_64 */ + /* 'Specific EOI' to slave */ + outb(0x60+(irq&7),PIC_SLAVE_CMD); + /* 'Specific EOI' to master-IRQ2 */ + outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); +#endif /* CONFIG_X86_64 */ + } else { + inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ + outb(cached_master_mask, PIC_MASTER_IMR); +#ifndef CONFIG_X86_64 + outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ +#else /* CONFIG_X86_64 */ + /* 'Specific EOI' to master */ + outb(0x60+irq,PIC_MASTER_CMD); +#endif /* CONFIG_X86_64 */ + } + spin_unlock_irqrestore(&i8259A_lock, flags); + return; + +spurious_8259A_irq: + /* + * this is the slow path - should happen rarely. + */ + if (i8259A_irq_real(irq)) + /* + * oops, the IRQ _is_ in service according to the + * 8259A - not spurious, go handle it. + */ + goto handle_real_irq; + + { + static int spurious_irq_mask; + /* + * At this point we can be sure the IRQ is spurious, + * lets ACK and report it. [once per IRQ] + */ + if (!(spurious_irq_mask & irqmask)) { +#ifndef CONFIG_X86_64 + printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); +#else /* CONFIG_X86_64 */ + printk(KERN_DEBUG + "spurious 8259A interrupt: IRQ%d.\n", irq); +#endif /* CONFIG_X86_64 */ + spurious_irq_mask |= irqmask; + } + atomic_inc(&irq_err_count); + /* + * Theoretically we do not have to handle this IRQ, + * but in Linux this does not cause problems and is + * simpler for us. + */ + goto handle_real_irq; + } +} + +static char irq_trigger[2]; +/** + * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ + */ +static void restore_ELCR(char *trigger) +{ + outb(trigger[0], 0x4d0); + outb(trigger[1], 0x4d1); +} + +static void save_ELCR(char *trigger) +{ + /* IRQ 0,1,2,8,13 are marked as reserved */ + trigger[0] = inb(0x4d0) & 0xF8; + trigger[1] = inb(0x4d1) & 0xDE; +} + +static int i8259A_resume(struct sys_device *dev) +{ + init_8259A(i8259A_auto_eoi); + restore_ELCR(irq_trigger); + return 0; +} + +static int i8259A_suspend(struct sys_device *dev, pm_message_t state) +{ + save_ELCR(irq_trigger); + return 0; +} + +static int i8259A_shutdown(struct sys_device *dev) +{ + /* Put the i8259A into a quiescent state that + * the kernel initialization code can get it + * out of. + */ + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ + return 0; +} + +static struct sysdev_class i8259_sysdev_class = { + .name = "i8259", + .suspend = i8259A_suspend, + .resume = i8259A_resume, + .shutdown = i8259A_shutdown, +}; + +static struct sys_device device_i8259A = { + .id = 0, + .cls = &i8259_sysdev_class, +}; + +static int __init i8259A_init_sysfs(void) +{ + int error = sysdev_class_register(&i8259_sysdev_class); + if (!error) + error = sysdev_register(&device_i8259A); + return error; +} + +device_initcall(i8259A_init_sysfs); + +void init_8259A(int auto_eoi) +{ + unsigned long flags; + + i8259A_auto_eoi = auto_eoi; + + spin_lock_irqsave(&i8259A_lock, flags); + + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ + + /* + * outb_pic - this has to work on a wide range of PC hardware. + */ + outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ +#ifndef CONFIG_X86_64 + outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ + outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ +#else /* CONFIG_X86_64 */ + /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ + outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); + /* 8259A-1 (the master) has a slave on IR2 */ + outb_pic(0x04, PIC_MASTER_IMR); +#endif /* CONFIG_X86_64 */ + if (auto_eoi) /* master does Auto EOI */ + outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); + else /* master expects normal EOI */ + outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); + + outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ +#ifndef CONFIG_X86_64 + outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ + outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ + outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ +#else /* CONFIG_X86_64 */ + /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ + outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); + /* 8259A-2 is a slave on master's IR2 */ + outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); + /* (slave's support for AEOI in flat mode is to be investigated) */ + outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); + +#endif /* CONFIG_X86_64 */ + if (auto_eoi) + /* + * In AEOI mode we just have to mask the interrupt + * when acking. + */ + i8259A_chip.mask_ack = disable_8259A_irq; + else + i8259A_chip.mask_ack = mask_and_ack_8259A; + + udelay(100); /* wait for 8259A to initialize */ + + outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ + outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ + + spin_unlock_irqrestore(&i8259A_lock, flags); +} diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259_32.c index fe631967d625..d66914287ee1 100644 --- a/arch/x86/kernel/i8259_32.c +++ b/arch/x86/kernel/i8259_32.c @@ -21,302 +21,7 @@ #include #include -/* - * This is the 'legacy' 8259A Programmable Interrupt Controller, - * present in the majority of PC/AT boxes. - * plus some generic x86 specific things if generic specifics makes - * any sense at all. - */ -static int i8259A_auto_eoi; -DEFINE_SPINLOCK(i8259A_lock); -static void mask_and_ack_8259A(unsigned int); - -static struct irq_chip i8259A_chip = { - .name = "XT-PIC", - .mask = disable_8259A_irq, - .disable = disable_8259A_irq, - .unmask = enable_8259A_irq, - .mask_ack = mask_and_ack_8259A, -}; - -/* - * 8259A PIC functions to handle ISA devices: - */ - -/* - * This contains the irq mask for both 8259A irq controllers, - */ -unsigned int cached_irq_mask = 0xffff; - -/* - * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) - * boards the timer interrupt is not really connected to any IO-APIC pin, - * it's fed to the master 8259A's IR0 line only. - * - * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. - * this 'mixed mode' IRQ handling costs nothing because it's only used - * at IRQ setup time. - */ -unsigned long io_apic_irqs; - -void disable_8259A_irq(unsigned int irq) -{ - unsigned int mask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask |= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -void enable_8259A_irq(unsigned int irq) -{ - unsigned int mask = ~(1 << irq); - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask &= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -int i8259A_irq_pending(unsigned int irq) -{ - unsigned int mask = 1<> 8); - spin_unlock_irqrestore(&i8259A_lock, flags); - - return ret; -} - -void make_8259A_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - io_apic_irqs &= ~(1<> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ - return value; -} - -/* - * Careful! The 8259A is a fragile beast, it pretty - * much _has_ to be done exactly like this (mask it - * first, _then_ send the EOI, and the order of EOI - * to the two 8259s is important! - */ -static void mask_and_ack_8259A(unsigned int irq) -{ - unsigned int irqmask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - /* - * Lightweight spurious IRQ detection. We do not want - * to overdo spurious IRQ handling - it's usually a sign - * of hardware problems, so we only do the checks we can - * do without slowing down good hardware unnecessarily. - * - * Note that IRQ7 and IRQ15 (the two spurious IRQs - * usually resulting from the 8259A-1|2 PICs) occur - * even if the IRQ is masked in the 8259A. Thus we - * can check spurious 8259A IRQs without doing the - * quite slow i8259A_irq_real() call for every IRQ. - * This does not cover 100% of spurious interrupts, - * but should be enough to warn the user that there - * is something bad going on ... - */ - if (cached_irq_mask & irqmask) - goto spurious_8259A_irq; - cached_irq_mask |= irqmask; - -handle_real_irq: - if (irq & 8) { - inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ - outb(cached_slave_mask, PIC_SLAVE_IMR); - outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ - } else { - inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ - outb(cached_master_mask, PIC_MASTER_IMR); - outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ - } - spin_unlock_irqrestore(&i8259A_lock, flags); - return; - -spurious_8259A_irq: - /* - * this is the slow path - should happen rarely. - */ - if (i8259A_irq_real(irq)) - /* - * oops, the IRQ _is_ in service according to the - * 8259A - not spurious, go handle it. - */ - goto handle_real_irq; - - { - static int spurious_irq_mask; - /* - * At this point we can be sure the IRQ is spurious, - * lets ACK and report it. [once per IRQ] - */ - if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); - spurious_irq_mask |= irqmask; - } - atomic_inc(&irq_err_count); - /* - * Theoretically we do not have to handle this IRQ, - * but in Linux this does not cause problems and is - * simpler for us. - */ - goto handle_real_irq; - } -} - -static char irq_trigger[2]; -/** - * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ - */ -static void restore_ELCR(char *trigger) -{ - outb(trigger[0], 0x4d0); - outb(trigger[1], 0x4d1); -} - -static void save_ELCR(char *trigger) -{ - /* IRQ 0,1,2,8,13 are marked as reserved */ - trigger[0] = inb(0x4d0) & 0xF8; - trigger[1] = inb(0x4d1) & 0xDE; -} - -static int i8259A_resume(struct sys_device *dev) -{ - init_8259A(i8259A_auto_eoi); - restore_ELCR(irq_trigger); - return 0; -} - -static int i8259A_suspend(struct sys_device *dev, pm_message_t state) -{ - save_ELCR(irq_trigger); - return 0; -} - -static int i8259A_shutdown(struct sys_device *dev) -{ - /* Put the i8259A into a quiescent state that - * the kernel initialization code can get it - * out of. - */ - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ - return 0; -} - -static struct sysdev_class i8259_sysdev_class = { - .name = "i8259", - .suspend = i8259A_suspend, - .resume = i8259A_resume, - .shutdown = i8259A_shutdown, -}; - -static struct sys_device device_i8259A = { - .id = 0, - .cls = &i8259_sysdev_class, -}; - -static int __init i8259A_init_sysfs(void) -{ - int error = sysdev_class_register(&i8259_sysdev_class); - if (!error) - error = sysdev_register(&device_i8259A); - return error; -} - -device_initcall(i8259A_init_sysfs); - -void init_8259A(int auto_eoi) -{ - unsigned long flags; - - i8259A_auto_eoi = auto_eoi; - - spin_lock_irqsave(&i8259A_lock, flags); - - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ - - /* - * outb_pic - this has to work on a wide range of PC hardware. - */ - outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ - outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ - outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ - if (auto_eoi) /* master does Auto EOI */ - outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); - else /* master expects normal EOI */ - outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); - - outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ - outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ - outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ - outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ - if (auto_eoi) - /* - * In AEOI mode we just have to mask the interrupt - * when acking. - */ - i8259A_chip.mask_ack = disable_8259A_irq; - else - i8259A_chip.mask_ack = mask_and_ack_8259A; - - udelay(100); /* wait for 8259A to initialize */ - - outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ - outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ - - spin_unlock_irqrestore(&i8259A_lock, flags); -} /* * Note that on a 486, we don't want to do a SIGFPE on an irq13 diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c index fa57a1568508..a95d2bd27e9d 100644 --- a/arch/x86/kernel/i8259_64.c +++ b/arch/x86/kernel/i8259_64.c @@ -87,315 +87,6 @@ static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = #undef IRQ #undef IRQLIST_16 -/* - * This is the 'legacy' 8259A Programmable Interrupt Controller, - * present in the majority of PC/AT boxes. - * plus some generic x86 specific things if generic specifics makes - * any sense at all. - * this file should become arch/i386/kernel/irq.c when the old irq.c - * moves to arch independent land - */ - -static int i8259A_auto_eoi; -DEFINE_SPINLOCK(i8259A_lock); -static void mask_and_ack_8259A(unsigned int); - -static struct irq_chip i8259A_chip = { - .name = "XT-PIC", - .mask = disable_8259A_irq, - .disable = disable_8259A_irq, - .unmask = enable_8259A_irq, - .mask_ack = mask_and_ack_8259A, -}; - -/* - * 8259A PIC functions to handle ISA devices: - */ - -/* - * This contains the irq mask for both 8259A irq controllers, - */ -unsigned int cached_irq_mask = 0xffff; - -/* - * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) - * boards the timer interrupt is not really connected to any IO-APIC pin, - * it's fed to the master 8259A's IR0 line only. - * - * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. - * this 'mixed mode' IRQ handling costs nothing because it's only used - * at IRQ setup time. - */ -unsigned long io_apic_irqs; - -void disable_8259A_irq(unsigned int irq) -{ - unsigned int mask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask |= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -void enable_8259A_irq(unsigned int irq) -{ - unsigned int mask = ~(1 << irq); - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask &= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -int i8259A_irq_pending(unsigned int irq) -{ - unsigned int mask = 1<> 8); - spin_unlock_irqrestore(&i8259A_lock, flags); - - return ret; -} - -void make_8259A_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - io_apic_irqs &= ~(1<> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ - return value; -} - -/* - * Careful! The 8259A is a fragile beast, it pretty - * much _has_ to be done exactly like this (mask it - * first, _then_ send the EOI, and the order of EOI - * to the two 8259s is important! - */ -static void mask_and_ack_8259A(unsigned int irq) -{ - unsigned int irqmask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - /* - * Lightweight spurious IRQ detection. We do not want - * to overdo spurious IRQ handling - it's usually a sign - * of hardware problems, so we only do the checks we can - * do without slowing down good hardware unnecessarily. - * - * Note that IRQ7 and IRQ15 (the two spurious IRQs - * usually resulting from the 8259A-1|2 PICs) occur - * even if the IRQ is masked in the 8259A. Thus we - * can check spurious 8259A IRQs without doing the - * quite slow i8259A_irq_real() call for every IRQ. - * This does not cover 100% of spurious interrupts, - * but should be enough to warn the user that there - * is something bad going on ... - */ - if (cached_irq_mask & irqmask) - goto spurious_8259A_irq; - cached_irq_mask |= irqmask; - -handle_real_irq: - if (irq & 8) { - inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ - outb(cached_slave_mask, PIC_SLAVE_IMR); - /* 'Specific EOI' to slave */ - outb(0x60+(irq&7),PIC_SLAVE_CMD); - /* 'Specific EOI' to master-IRQ2 */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); - } else { - inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ - outb(cached_master_mask, PIC_MASTER_IMR); - /* 'Specific EOI' to master */ - outb(0x60+irq,PIC_MASTER_CMD); - } - spin_unlock_irqrestore(&i8259A_lock, flags); - return; - -spurious_8259A_irq: - /* - * this is the slow path - should happen rarely. - */ - if (i8259A_irq_real(irq)) - /* - * oops, the IRQ _is_ in service according to the - * 8259A - not spurious, go handle it. - */ - goto handle_real_irq; - - { - static int spurious_irq_mask; - /* - * At this point we can be sure the IRQ is spurious, - * lets ACK and report it. [once per IRQ] - */ - if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG - "spurious 8259A interrupt: IRQ%d.\n", irq); - spurious_irq_mask |= irqmask; - } - atomic_inc(&irq_err_count); - /* - * Theoretically we do not have to handle this IRQ, - * but in Linux this does not cause problems and is - * simpler for us. - */ - goto handle_real_irq; - } -} - -static char irq_trigger[2]; -/** - * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ - */ -static void restore_ELCR(char *trigger) -{ - outb(trigger[0], 0x4d0); - outb(trigger[1], 0x4d1); -} - -static void save_ELCR(char *trigger) -{ - /* IRQ 0,1,2,8,13 are marked as reserved */ - trigger[0] = inb(0x4d0) & 0xF8; - trigger[1] = inb(0x4d1) & 0xDE; -} - -static int i8259A_resume(struct sys_device *dev) -{ - init_8259A(i8259A_auto_eoi); - restore_ELCR(irq_trigger); - return 0; -} - -static int i8259A_suspend(struct sys_device *dev, pm_message_t state) -{ - save_ELCR(irq_trigger); - return 0; -} - -static int i8259A_shutdown(struct sys_device *dev) -{ - /* Put the i8259A into a quiescent state that - * the kernel initialization code can get it - * out of. - */ - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ - return 0; -} - -static struct sysdev_class i8259_sysdev_class = { - .name = "i8259", - .suspend = i8259A_suspend, - .resume = i8259A_resume, - .shutdown = i8259A_shutdown, -}; - -static struct sys_device device_i8259A = { - .id = 0, - .cls = &i8259_sysdev_class, -}; - -static int __init i8259A_init_sysfs(void) -{ - int error = sysdev_class_register(&i8259_sysdev_class); - if (!error) - error = sysdev_register(&device_i8259A); - return error; -} - -device_initcall(i8259A_init_sysfs); - -void init_8259A(int auto_eoi) -{ - unsigned long flags; - - i8259A_auto_eoi = auto_eoi; - - spin_lock_irqsave(&i8259A_lock, flags); - - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ - - /* - * outb_pic - this has to work on a wide range of PC hardware. - */ - outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ - /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ - outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); - /* 8259A-1 (the master) has a slave on IR2 */ - outb_pic(0x04, PIC_MASTER_IMR); - if (auto_eoi) /* master does Auto EOI */ - outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); - else /* master expects normal EOI */ - outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); - - outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ - /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ - outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); - /* 8259A-2 is a slave on master's IR2 */ - outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); - /* (slave's support for AEOI in flat mode is to be investigated) */ - outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); - - if (auto_eoi) - /* - * In AEOI mode we just have to mask the interrupt - * when acking. - */ - i8259A_chip.mask_ack = disable_8259A_irq; - else - i8259A_chip.mask_ack = mask_and_ack_8259A; - - udelay(100); /* wait for 8259A to initialize */ - - outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ - outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ - - spin_unlock_irqrestore(&i8259A_lock, flags); -} - diff --git a/include/asm-x86/i8259.h b/include/asm-x86/i8259.h index 45d4df3e51e6..2f98df91f1f2 100644 --- a/include/asm-x86/i8259.h +++ b/include/asm-x86/i8259.h @@ -55,4 +55,6 @@ static inline void outb_pic(unsigned char value, unsigned int port) udelay(2); } +extern struct irq_chip i8259A_chip; + #endif /* __ASM_I8259_H__ */ From 6b4d3afbe722ee71b8da346c2c4393938440c471 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 21 May 2008 11:47:24 +0200 Subject: [PATCH 058/821] x86: i8259.c: remove #ifdefs around includes Remove #ifdefs around includes; including too much should be always safe. Signed-off-by: Pavel Machek Cc: macro@ds2.pg.gda.pl Signed-off-by: Thomas Gleixner --- arch/x86/kernel/i8259.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 2decba6b0101..8b7eb0cb2e7e 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -1,14 +1,10 @@ -#ifdef CONFIG_X86_64 #include -#endif /* CONFIG_X86_64 */ #include #include #include #include #include -#ifdef CONFIG_X86_64 #include -#endif /* CONFIG_X86_64 */ #include #include #include @@ -16,24 +12,17 @@ #include #include -#ifdef CONFIG_X86_64 #include -#endif /* CONFIG_X86_64 */ #include #include #include -#ifndef CONFIG_X86_64 #include -#else /* CONFIG_X86_64 */ #include -#endif /* CONFIG_X86_64 */ #include #include #include #include -#ifndef CONFIG_X86_64 #include -#endif /* ! CONFIG_X86_64 */ #include /* From 4f6f3bac18c80ff6cf072d90796755c69cc4c748 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 21 May 2008 11:52:52 +0200 Subject: [PATCH 059/821] x86: i8259.c: remove trivial ifdefs Remove #ifdefs where the only difference is formatting of comments. Signed-off-by: Pavel Machek Cc: macro@ds2.pg.gda.pl Signed-off-by: Thomas Gleixner --- arch/x86/kernel/i8259.c | 20 +++----------------- 1 file changed, 3 insertions(+), 17 deletions(-) diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 8b7eb0cb2e7e..433e49edfd4f 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -175,24 +175,14 @@ handle_real_irq: if (irq & 8) { inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ outb(cached_slave_mask, PIC_SLAVE_IMR); -#ifndef CONFIG_X86_64 - outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ -#else /* CONFIG_X86_64 */ /* 'Specific EOI' to slave */ - outb(0x60+(irq&7),PIC_SLAVE_CMD); + outb(0x60+(irq&7), PIC_SLAVE_CMD); /* 'Specific EOI' to master-IRQ2 */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); -#endif /* CONFIG_X86_64 */ + outb(0x60+PIC_CASCADE_IR, PIC_MASTER_CMD); } else { inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ outb(cached_master_mask, PIC_MASTER_IMR); -#ifndef CONFIG_X86_64 - outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ -#else /* CONFIG_X86_64 */ - /* 'Specific EOI' to master */ - outb(0x60+irq,PIC_MASTER_CMD); -#endif /* CONFIG_X86_64 */ + outb(0x60+irq, PIC_MASTER_CMD); /* 'Specific EOI to master */ } spin_unlock_irqrestore(&i8259A_lock, flags); return; @@ -215,12 +205,8 @@ spurious_8259A_irq: * lets ACK and report it. [once per IRQ] */ if (!(spurious_irq_mask & irqmask)) { -#ifndef CONFIG_X86_64 - printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); -#else /* CONFIG_X86_64 */ printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); -#endif /* CONFIG_X86_64 */ spurious_irq_mask |= irqmask; } atomic_inc(&irq_err_count); From 4d9a6e6128dd8ada0d2feed2a9bb6506043e4655 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 21 May 2008 11:57:52 +0200 Subject: [PATCH 060/821] x86: i8259: cleanup codingstyle Signed-off-by: Pavel Machek Cc: macro@ds2.pg.gda.pl Signed-off-by: Thomas Gleixner --- arch/x86/kernel/i8259.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 433e49edfd4f..7a0fda8f01b5 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -129,14 +129,14 @@ static inline int i8259A_irq_real(unsigned int irq) int irqmask = 1<> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ + outb(0x0A, PIC_SLAVE_CMD); /* back to the IRR register */ return value; } From f20b11e716936f85850654c49e06a1f955b9e5fc Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 24 May 2008 15:59:58 +0200 Subject: [PATCH 061/821] x86: rename the i8259_32/64.c leftovers to initirq_32/64.c The leftovers of the i8259 unification have nothing to do with i8259 at all. They contain interrupt init code and the i8259_xx name is just misleading now. Rename them to initirq_32/64.c Signed-off-by: Thomas Gleixner --- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/{i8259_32.c => irqinit_32.c} | 0 arch/x86/kernel/{i8259_64.c => irqinit_64.c} | 0 3 files changed, 1 insertion(+), 1 deletion(-) rename arch/x86/kernel/{i8259_32.c => irqinit_32.c} (100%) rename arch/x86/kernel/{i8259_64.c => irqinit_64.c} (100%) diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index f71a76ef2596..2a53ad2cb450 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -18,7 +18,7 @@ CFLAGS_tsc_64.o := $(nostackp) obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o obj-y += traps_$(BITS).o irq_$(BITS).o obj-y += time_$(BITS).o ioport.o ldt.o -obj-y += setup_$(BITS).o i8259.o i8259_$(BITS).o setup.o +obj-y += setup_$(BITS).o i8259.o irqinit_$(BITS).o setup.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/irqinit_32.c similarity index 100% rename from arch/x86/kernel/i8259_32.c rename to arch/x86/kernel/irqinit_32.c diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/irqinit_64.c similarity index 100% rename from arch/x86/kernel/i8259_64.c rename to arch/x86/kernel/irqinit_64.c From fce39665abb71d01d74ac74eb13dd69a799dfc2f Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:36 +0200 Subject: [PATCH 062/821] x86: make init_ISA_irqs() static Moved to i8259 branch to avoid conflicts. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/irqinit_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c index a95d2bd27e9d..64bc0f14285f 100644 --- a/arch/x86/kernel/irqinit_64.c +++ b/arch/x86/kernel/irqinit_64.c @@ -120,7 +120,7 @@ DEFINE_PER_CPU(vector_irq_t, vector_irq) = { [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 }; -void __init init_ISA_irqs (void) +static void __init init_ISA_irqs (void) { int i; From 21fd5132b223a10bdf17713dd0bf321cbd6471d2 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 21 May 2008 11:44:02 +0200 Subject: [PATCH 063/821] x86: automatical unification of i8259.c Make conversion of i8259 very mechanical -- i8259 was generated by diff -D, with too different parts left in i8259_32 and i8259_64.c. Only "by hand" changes were removal of #ifdef from middle of the comment (prevented compilation) and removal of one static to allow splitting into files. Of course, it will need some cleanups now, and those will follow. Signed-of-by: Pavel Machek --- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/i8259.c | 368 +++++++++++++++++++++++++++++++++++++ arch/x86/kernel/i8259_32.c | 295 ----------------------------- arch/x86/kernel/i8259_64.c | 309 ------------------------------- include/asm-x86/i8259.h | 2 + 5 files changed, 371 insertions(+), 605 deletions(-) create mode 100644 arch/x86/kernel/i8259.c diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 5e618c3b4720..f71a76ef2596 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -18,7 +18,7 @@ CFLAGS_tsc_64.o := $(nostackp) obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o obj-y += traps_$(BITS).o irq_$(BITS).o obj-y += time_$(BITS).o ioport.o ldt.o -obj-y += setup_$(BITS).o i8259_$(BITS).o setup.o +obj-y += setup_$(BITS).o i8259.o i8259_$(BITS).o setup.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c new file mode 100644 index 000000000000..2decba6b0101 --- /dev/null +++ b/arch/x86/kernel/i8259.c @@ -0,0 +1,368 @@ +#ifdef CONFIG_X86_64 +#include +#endif /* CONFIG_X86_64 */ +#include +#include +#include +#include +#include +#ifdef CONFIG_X86_64 +#include +#endif /* CONFIG_X86_64 */ +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_X86_64 +#include +#endif /* CONFIG_X86_64 */ +#include +#include +#include +#ifndef CONFIG_X86_64 +#include +#else /* CONFIG_X86_64 */ +#include +#endif /* CONFIG_X86_64 */ +#include +#include +#include +#include +#ifndef CONFIG_X86_64 +#include +#endif /* ! CONFIG_X86_64 */ +#include + +/* + * This is the 'legacy' 8259A Programmable Interrupt Controller, + * present in the majority of PC/AT boxes. + * plus some generic x86 specific things if generic specifics makes + * any sense at all. + */ + +static int i8259A_auto_eoi; +DEFINE_SPINLOCK(i8259A_lock); +static void mask_and_ack_8259A(unsigned int); + +struct irq_chip i8259A_chip = { + .name = "XT-PIC", + .mask = disable_8259A_irq, + .disable = disable_8259A_irq, + .unmask = enable_8259A_irq, + .mask_ack = mask_and_ack_8259A, +}; + +/* + * 8259A PIC functions to handle ISA devices: + */ + +/* + * This contains the irq mask for both 8259A irq controllers, + */ +unsigned int cached_irq_mask = 0xffff; + +/* + * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) + * boards the timer interrupt is not really connected to any IO-APIC pin, + * it's fed to the master 8259A's IR0 line only. + * + * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. + * this 'mixed mode' IRQ handling costs nothing because it's only used + * at IRQ setup time. + */ +unsigned long io_apic_irqs; + +void disable_8259A_irq(unsigned int irq) +{ + unsigned int mask = 1 << irq; + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + cached_irq_mask |= mask; + if (irq & 8) + outb(cached_slave_mask, PIC_SLAVE_IMR); + else + outb(cached_master_mask, PIC_MASTER_IMR); + spin_unlock_irqrestore(&i8259A_lock, flags); +} + +void enable_8259A_irq(unsigned int irq) +{ + unsigned int mask = ~(1 << irq); + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + cached_irq_mask &= mask; + if (irq & 8) + outb(cached_slave_mask, PIC_SLAVE_IMR); + else + outb(cached_master_mask, PIC_MASTER_IMR); + spin_unlock_irqrestore(&i8259A_lock, flags); +} + +int i8259A_irq_pending(unsigned int irq) +{ + unsigned int mask = 1<> 8); + spin_unlock_irqrestore(&i8259A_lock, flags); + + return ret; +} + +void make_8259A_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + io_apic_irqs &= ~(1<> 8); + outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ + return value; +} + +/* + * Careful! The 8259A is a fragile beast, it pretty + * much _has_ to be done exactly like this (mask it + * first, _then_ send the EOI, and the order of EOI + * to the two 8259s is important! + */ +static void mask_and_ack_8259A(unsigned int irq) +{ + unsigned int irqmask = 1 << irq; + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + /* + * Lightweight spurious IRQ detection. We do not want + * to overdo spurious IRQ handling - it's usually a sign + * of hardware problems, so we only do the checks we can + * do without slowing down good hardware unnecessarily. + * + * Note that IRQ7 and IRQ15 (the two spurious IRQs + * usually resulting from the 8259A-1|2 PICs) occur + * even if the IRQ is masked in the 8259A. Thus we + * can check spurious 8259A IRQs without doing the + * quite slow i8259A_irq_real() call for every IRQ. + * This does not cover 100% of spurious interrupts, + * but should be enough to warn the user that there + * is something bad going on ... + */ + if (cached_irq_mask & irqmask) + goto spurious_8259A_irq; + cached_irq_mask |= irqmask; + +handle_real_irq: + if (irq & 8) { + inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ + outb(cached_slave_mask, PIC_SLAVE_IMR); +#ifndef CONFIG_X86_64 + outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ + outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ +#else /* CONFIG_X86_64 */ + /* 'Specific EOI' to slave */ + outb(0x60+(irq&7),PIC_SLAVE_CMD); + /* 'Specific EOI' to master-IRQ2 */ + outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); +#endif /* CONFIG_X86_64 */ + } else { + inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ + outb(cached_master_mask, PIC_MASTER_IMR); +#ifndef CONFIG_X86_64 + outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ +#else /* CONFIG_X86_64 */ + /* 'Specific EOI' to master */ + outb(0x60+irq,PIC_MASTER_CMD); +#endif /* CONFIG_X86_64 */ + } + spin_unlock_irqrestore(&i8259A_lock, flags); + return; + +spurious_8259A_irq: + /* + * this is the slow path - should happen rarely. + */ + if (i8259A_irq_real(irq)) + /* + * oops, the IRQ _is_ in service according to the + * 8259A - not spurious, go handle it. + */ + goto handle_real_irq; + + { + static int spurious_irq_mask; + /* + * At this point we can be sure the IRQ is spurious, + * lets ACK and report it. [once per IRQ] + */ + if (!(spurious_irq_mask & irqmask)) { +#ifndef CONFIG_X86_64 + printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); +#else /* CONFIG_X86_64 */ + printk(KERN_DEBUG + "spurious 8259A interrupt: IRQ%d.\n", irq); +#endif /* CONFIG_X86_64 */ + spurious_irq_mask |= irqmask; + } + atomic_inc(&irq_err_count); + /* + * Theoretically we do not have to handle this IRQ, + * but in Linux this does not cause problems and is + * simpler for us. + */ + goto handle_real_irq; + } +} + +static char irq_trigger[2]; +/** + * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ + */ +static void restore_ELCR(char *trigger) +{ + outb(trigger[0], 0x4d0); + outb(trigger[1], 0x4d1); +} + +static void save_ELCR(char *trigger) +{ + /* IRQ 0,1,2,8,13 are marked as reserved */ + trigger[0] = inb(0x4d0) & 0xF8; + trigger[1] = inb(0x4d1) & 0xDE; +} + +static int i8259A_resume(struct sys_device *dev) +{ + init_8259A(i8259A_auto_eoi); + restore_ELCR(irq_trigger); + return 0; +} + +static int i8259A_suspend(struct sys_device *dev, pm_message_t state) +{ + save_ELCR(irq_trigger); + return 0; +} + +static int i8259A_shutdown(struct sys_device *dev) +{ + /* Put the i8259A into a quiescent state that + * the kernel initialization code can get it + * out of. + */ + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ + return 0; +} + +static struct sysdev_class i8259_sysdev_class = { + .name = "i8259", + .suspend = i8259A_suspend, + .resume = i8259A_resume, + .shutdown = i8259A_shutdown, +}; + +static struct sys_device device_i8259A = { + .id = 0, + .cls = &i8259_sysdev_class, +}; + +static int __init i8259A_init_sysfs(void) +{ + int error = sysdev_class_register(&i8259_sysdev_class); + if (!error) + error = sysdev_register(&device_i8259A); + return error; +} + +device_initcall(i8259A_init_sysfs); + +void init_8259A(int auto_eoi) +{ + unsigned long flags; + + i8259A_auto_eoi = auto_eoi; + + spin_lock_irqsave(&i8259A_lock, flags); + + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ + + /* + * outb_pic - this has to work on a wide range of PC hardware. + */ + outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ +#ifndef CONFIG_X86_64 + outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ + outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ +#else /* CONFIG_X86_64 */ + /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ + outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); + /* 8259A-1 (the master) has a slave on IR2 */ + outb_pic(0x04, PIC_MASTER_IMR); +#endif /* CONFIG_X86_64 */ + if (auto_eoi) /* master does Auto EOI */ + outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); + else /* master expects normal EOI */ + outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); + + outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ +#ifndef CONFIG_X86_64 + outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ + outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ + outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ +#else /* CONFIG_X86_64 */ + /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ + outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); + /* 8259A-2 is a slave on master's IR2 */ + outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); + /* (slave's support for AEOI in flat mode is to be investigated) */ + outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); + +#endif /* CONFIG_X86_64 */ + if (auto_eoi) + /* + * In AEOI mode we just have to mask the interrupt + * when acking. + */ + i8259A_chip.mask_ack = disable_8259A_irq; + else + i8259A_chip.mask_ack = mask_and_ack_8259A; + + udelay(100); /* wait for 8259A to initialize */ + + outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ + outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ + + spin_unlock_irqrestore(&i8259A_lock, flags); +} diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259_32.c index fe631967d625..d66914287ee1 100644 --- a/arch/x86/kernel/i8259_32.c +++ b/arch/x86/kernel/i8259_32.c @@ -21,302 +21,7 @@ #include #include -/* - * This is the 'legacy' 8259A Programmable Interrupt Controller, - * present in the majority of PC/AT boxes. - * plus some generic x86 specific things if generic specifics makes - * any sense at all. - */ -static int i8259A_auto_eoi; -DEFINE_SPINLOCK(i8259A_lock); -static void mask_and_ack_8259A(unsigned int); - -static struct irq_chip i8259A_chip = { - .name = "XT-PIC", - .mask = disable_8259A_irq, - .disable = disable_8259A_irq, - .unmask = enable_8259A_irq, - .mask_ack = mask_and_ack_8259A, -}; - -/* - * 8259A PIC functions to handle ISA devices: - */ - -/* - * This contains the irq mask for both 8259A irq controllers, - */ -unsigned int cached_irq_mask = 0xffff; - -/* - * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) - * boards the timer interrupt is not really connected to any IO-APIC pin, - * it's fed to the master 8259A's IR0 line only. - * - * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. - * this 'mixed mode' IRQ handling costs nothing because it's only used - * at IRQ setup time. - */ -unsigned long io_apic_irqs; - -void disable_8259A_irq(unsigned int irq) -{ - unsigned int mask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask |= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -void enable_8259A_irq(unsigned int irq) -{ - unsigned int mask = ~(1 << irq); - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask &= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -int i8259A_irq_pending(unsigned int irq) -{ - unsigned int mask = 1<> 8); - spin_unlock_irqrestore(&i8259A_lock, flags); - - return ret; -} - -void make_8259A_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - io_apic_irqs &= ~(1<> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ - return value; -} - -/* - * Careful! The 8259A is a fragile beast, it pretty - * much _has_ to be done exactly like this (mask it - * first, _then_ send the EOI, and the order of EOI - * to the two 8259s is important! - */ -static void mask_and_ack_8259A(unsigned int irq) -{ - unsigned int irqmask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - /* - * Lightweight spurious IRQ detection. We do not want - * to overdo spurious IRQ handling - it's usually a sign - * of hardware problems, so we only do the checks we can - * do without slowing down good hardware unnecessarily. - * - * Note that IRQ7 and IRQ15 (the two spurious IRQs - * usually resulting from the 8259A-1|2 PICs) occur - * even if the IRQ is masked in the 8259A. Thus we - * can check spurious 8259A IRQs without doing the - * quite slow i8259A_irq_real() call for every IRQ. - * This does not cover 100% of spurious interrupts, - * but should be enough to warn the user that there - * is something bad going on ... - */ - if (cached_irq_mask & irqmask) - goto spurious_8259A_irq; - cached_irq_mask |= irqmask; - -handle_real_irq: - if (irq & 8) { - inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ - outb(cached_slave_mask, PIC_SLAVE_IMR); - outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ - } else { - inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ - outb(cached_master_mask, PIC_MASTER_IMR); - outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ - } - spin_unlock_irqrestore(&i8259A_lock, flags); - return; - -spurious_8259A_irq: - /* - * this is the slow path - should happen rarely. - */ - if (i8259A_irq_real(irq)) - /* - * oops, the IRQ _is_ in service according to the - * 8259A - not spurious, go handle it. - */ - goto handle_real_irq; - - { - static int spurious_irq_mask; - /* - * At this point we can be sure the IRQ is spurious, - * lets ACK and report it. [once per IRQ] - */ - if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); - spurious_irq_mask |= irqmask; - } - atomic_inc(&irq_err_count); - /* - * Theoretically we do not have to handle this IRQ, - * but in Linux this does not cause problems and is - * simpler for us. - */ - goto handle_real_irq; - } -} - -static char irq_trigger[2]; -/** - * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ - */ -static void restore_ELCR(char *trigger) -{ - outb(trigger[0], 0x4d0); - outb(trigger[1], 0x4d1); -} - -static void save_ELCR(char *trigger) -{ - /* IRQ 0,1,2,8,13 are marked as reserved */ - trigger[0] = inb(0x4d0) & 0xF8; - trigger[1] = inb(0x4d1) & 0xDE; -} - -static int i8259A_resume(struct sys_device *dev) -{ - init_8259A(i8259A_auto_eoi); - restore_ELCR(irq_trigger); - return 0; -} - -static int i8259A_suspend(struct sys_device *dev, pm_message_t state) -{ - save_ELCR(irq_trigger); - return 0; -} - -static int i8259A_shutdown(struct sys_device *dev) -{ - /* Put the i8259A into a quiescent state that - * the kernel initialization code can get it - * out of. - */ - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ - return 0; -} - -static struct sysdev_class i8259_sysdev_class = { - .name = "i8259", - .suspend = i8259A_suspend, - .resume = i8259A_resume, - .shutdown = i8259A_shutdown, -}; - -static struct sys_device device_i8259A = { - .id = 0, - .cls = &i8259_sysdev_class, -}; - -static int __init i8259A_init_sysfs(void) -{ - int error = sysdev_class_register(&i8259_sysdev_class); - if (!error) - error = sysdev_register(&device_i8259A); - return error; -} - -device_initcall(i8259A_init_sysfs); - -void init_8259A(int auto_eoi) -{ - unsigned long flags; - - i8259A_auto_eoi = auto_eoi; - - spin_lock_irqsave(&i8259A_lock, flags); - - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ - - /* - * outb_pic - this has to work on a wide range of PC hardware. - */ - outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ - outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ - outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ - if (auto_eoi) /* master does Auto EOI */ - outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); - else /* master expects normal EOI */ - outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); - - outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ - outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ - outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ - outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ - if (auto_eoi) - /* - * In AEOI mode we just have to mask the interrupt - * when acking. - */ - i8259A_chip.mask_ack = disable_8259A_irq; - else - i8259A_chip.mask_ack = mask_and_ack_8259A; - - udelay(100); /* wait for 8259A to initialize */ - - outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ - outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ - - spin_unlock_irqrestore(&i8259A_lock, flags); -} /* * Note that on a 486, we don't want to do a SIGFPE on an irq13 diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c index 1870e0e86559..b44095efcf83 100644 --- a/arch/x86/kernel/i8259_64.c +++ b/arch/x86/kernel/i8259_64.c @@ -101,315 +101,6 @@ static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = #undef IRQ #undef IRQLIST_16 -/* - * This is the 'legacy' 8259A Programmable Interrupt Controller, - * present in the majority of PC/AT boxes. - * plus some generic x86 specific things if generic specifics makes - * any sense at all. - * this file should become arch/i386/kernel/irq.c when the old irq.c - * moves to arch independent land - */ - -static int i8259A_auto_eoi; -DEFINE_SPINLOCK(i8259A_lock); -static void mask_and_ack_8259A(unsigned int); - -static struct irq_chip i8259A_chip = { - .name = "XT-PIC", - .mask = disable_8259A_irq, - .disable = disable_8259A_irq, - .unmask = enable_8259A_irq, - .mask_ack = mask_and_ack_8259A, -}; - -/* - * 8259A PIC functions to handle ISA devices: - */ - -/* - * This contains the irq mask for both 8259A irq controllers, - */ -unsigned int cached_irq_mask = 0xffff; - -/* - * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) - * boards the timer interrupt is not really connected to any IO-APIC pin, - * it's fed to the master 8259A's IR0 line only. - * - * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. - * this 'mixed mode' IRQ handling costs nothing because it's only used - * at IRQ setup time. - */ -unsigned long io_apic_irqs; - -void disable_8259A_irq(unsigned int irq) -{ - unsigned int mask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask |= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -void enable_8259A_irq(unsigned int irq) -{ - unsigned int mask = ~(1 << irq); - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask &= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -int i8259A_irq_pending(unsigned int irq) -{ - unsigned int mask = 1<> 8); - spin_unlock_irqrestore(&i8259A_lock, flags); - - return ret; -} - -void make_8259A_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - io_apic_irqs &= ~(1<> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ - return value; -} - -/* - * Careful! The 8259A is a fragile beast, it pretty - * much _has_ to be done exactly like this (mask it - * first, _then_ send the EOI, and the order of EOI - * to the two 8259s is important! - */ -static void mask_and_ack_8259A(unsigned int irq) -{ - unsigned int irqmask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - /* - * Lightweight spurious IRQ detection. We do not want - * to overdo spurious IRQ handling - it's usually a sign - * of hardware problems, so we only do the checks we can - * do without slowing down good hardware unnecessarily. - * - * Note that IRQ7 and IRQ15 (the two spurious IRQs - * usually resulting from the 8259A-1|2 PICs) occur - * even if the IRQ is masked in the 8259A. Thus we - * can check spurious 8259A IRQs without doing the - * quite slow i8259A_irq_real() call for every IRQ. - * This does not cover 100% of spurious interrupts, - * but should be enough to warn the user that there - * is something bad going on ... - */ - if (cached_irq_mask & irqmask) - goto spurious_8259A_irq; - cached_irq_mask |= irqmask; - -handle_real_irq: - if (irq & 8) { - inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ - outb(cached_slave_mask, PIC_SLAVE_IMR); - /* 'Specific EOI' to slave */ - outb(0x60+(irq&7),PIC_SLAVE_CMD); - /* 'Specific EOI' to master-IRQ2 */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); - } else { - inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ - outb(cached_master_mask, PIC_MASTER_IMR); - /* 'Specific EOI' to master */ - outb(0x60+irq,PIC_MASTER_CMD); - } - spin_unlock_irqrestore(&i8259A_lock, flags); - return; - -spurious_8259A_irq: - /* - * this is the slow path - should happen rarely. - */ - if (i8259A_irq_real(irq)) - /* - * oops, the IRQ _is_ in service according to the - * 8259A - not spurious, go handle it. - */ - goto handle_real_irq; - - { - static int spurious_irq_mask; - /* - * At this point we can be sure the IRQ is spurious, - * lets ACK and report it. [once per IRQ] - */ - if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG - "spurious 8259A interrupt: IRQ%d.\n", irq); - spurious_irq_mask |= irqmask; - } - atomic_inc(&irq_err_count); - /* - * Theoretically we do not have to handle this IRQ, - * but in Linux this does not cause problems and is - * simpler for us. - */ - goto handle_real_irq; - } -} - -static char irq_trigger[2]; -/** - * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ - */ -static void restore_ELCR(char *trigger) -{ - outb(trigger[0], 0x4d0); - outb(trigger[1], 0x4d1); -} - -static void save_ELCR(char *trigger) -{ - /* IRQ 0,1,2,8,13 are marked as reserved */ - trigger[0] = inb(0x4d0) & 0xF8; - trigger[1] = inb(0x4d1) & 0xDE; -} - -static int i8259A_resume(struct sys_device *dev) -{ - init_8259A(i8259A_auto_eoi); - restore_ELCR(irq_trigger); - return 0; -} - -static int i8259A_suspend(struct sys_device *dev, pm_message_t state) -{ - save_ELCR(irq_trigger); - return 0; -} - -static int i8259A_shutdown(struct sys_device *dev) -{ - /* Put the i8259A into a quiescent state that - * the kernel initialization code can get it - * out of. - */ - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ - return 0; -} - -static struct sysdev_class i8259_sysdev_class = { - .name = "i8259", - .suspend = i8259A_suspend, - .resume = i8259A_resume, - .shutdown = i8259A_shutdown, -}; - -static struct sys_device device_i8259A = { - .id = 0, - .cls = &i8259_sysdev_class, -}; - -static int __init i8259A_init_sysfs(void) -{ - int error = sysdev_class_register(&i8259_sysdev_class); - if (!error) - error = sysdev_register(&device_i8259A); - return error; -} - -device_initcall(i8259A_init_sysfs); - -void init_8259A(int auto_eoi) -{ - unsigned long flags; - - i8259A_auto_eoi = auto_eoi; - - spin_lock_irqsave(&i8259A_lock, flags); - - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ - - /* - * outb_pic - this has to work on a wide range of PC hardware. - */ - outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ - /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ - outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); - /* 8259A-1 (the master) has a slave on IR2 */ - outb_pic(0x04, PIC_MASTER_IMR); - if (auto_eoi) /* master does Auto EOI */ - outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); - else /* master expects normal EOI */ - outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); - - outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ - /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ - outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); - /* 8259A-2 is a slave on master's IR2 */ - outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); - /* (slave's support for AEOI in flat mode is to be investigated) */ - outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); - - if (auto_eoi) - /* - * In AEOI mode we just have to mask the interrupt - * when acking. - */ - i8259A_chip.mask_ack = disable_8259A_irq; - else - i8259A_chip.mask_ack = mask_and_ack_8259A; - - udelay(100); /* wait for 8259A to initialize */ - - outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ - outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ - - spin_unlock_irqrestore(&i8259A_lock, flags); -} - diff --git a/include/asm-x86/i8259.h b/include/asm-x86/i8259.h index 45d4df3e51e6..2f98df91f1f2 100644 --- a/include/asm-x86/i8259.h +++ b/include/asm-x86/i8259.h @@ -55,4 +55,6 @@ static inline void outb_pic(unsigned char value, unsigned int port) udelay(2); } +extern struct irq_chip i8259A_chip; + #endif /* __ASM_I8259_H__ */ From 15d613cb25efd978dd55592d011a6ffc487b3432 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 21 May 2008 11:47:24 +0200 Subject: [PATCH 064/821] x86: i8259.c: remove #ifdefs around includes Remove #ifdefs around includes; including too much should be always safe. Signed-off-by: Pavel Machek Cc: macro@ds2.pg.gda.pl Signed-off-by: Thomas Gleixner --- arch/x86/kernel/i8259.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 2decba6b0101..8b7eb0cb2e7e 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -1,14 +1,10 @@ -#ifdef CONFIG_X86_64 #include -#endif /* CONFIG_X86_64 */ #include #include #include #include #include -#ifdef CONFIG_X86_64 #include -#endif /* CONFIG_X86_64 */ #include #include #include @@ -16,24 +12,17 @@ #include #include -#ifdef CONFIG_X86_64 #include -#endif /* CONFIG_X86_64 */ #include #include #include -#ifndef CONFIG_X86_64 #include -#else /* CONFIG_X86_64 */ #include -#endif /* CONFIG_X86_64 */ #include #include #include #include -#ifndef CONFIG_X86_64 #include -#endif /* ! CONFIG_X86_64 */ #include /* From 3e8631d27088f394b6788829e238a60bf07d47ab Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 21 May 2008 11:52:52 +0200 Subject: [PATCH 065/821] x86: i8259.c: remove trivial ifdefs Remove #ifdefs where the only difference is formatting of comments. Signed-off-by: Pavel Machek Cc: macro@ds2.pg.gda.pl Signed-off-by: Thomas Gleixner --- arch/x86/kernel/i8259.c | 20 +++----------------- 1 file changed, 3 insertions(+), 17 deletions(-) diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 8b7eb0cb2e7e..433e49edfd4f 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -175,24 +175,14 @@ handle_real_irq: if (irq & 8) { inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ outb(cached_slave_mask, PIC_SLAVE_IMR); -#ifndef CONFIG_X86_64 - outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ -#else /* CONFIG_X86_64 */ /* 'Specific EOI' to slave */ - outb(0x60+(irq&7),PIC_SLAVE_CMD); + outb(0x60+(irq&7), PIC_SLAVE_CMD); /* 'Specific EOI' to master-IRQ2 */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); -#endif /* CONFIG_X86_64 */ + outb(0x60+PIC_CASCADE_IR, PIC_MASTER_CMD); } else { inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ outb(cached_master_mask, PIC_MASTER_IMR); -#ifndef CONFIG_X86_64 - outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ -#else /* CONFIG_X86_64 */ - /* 'Specific EOI' to master */ - outb(0x60+irq,PIC_MASTER_CMD); -#endif /* CONFIG_X86_64 */ + outb(0x60+irq, PIC_MASTER_CMD); /* 'Specific EOI to master */ } spin_unlock_irqrestore(&i8259A_lock, flags); return; @@ -215,12 +205,8 @@ spurious_8259A_irq: * lets ACK and report it. [once per IRQ] */ if (!(spurious_irq_mask & irqmask)) { -#ifndef CONFIG_X86_64 - printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); -#else /* CONFIG_X86_64 */ printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); -#endif /* CONFIG_X86_64 */ spurious_irq_mask |= irqmask; } atomic_inc(&irq_err_count); From 680afbf989d697b9ba1382017a73c8cfa53b3f89 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 21 May 2008 11:57:52 +0200 Subject: [PATCH 066/821] x86: i8259: cleanup codingstyle Signed-off-by: Pavel Machek Cc: macro@ds2.pg.gda.pl Signed-off-by: Thomas Gleixner --- arch/x86/kernel/i8259.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 433e49edfd4f..7a0fda8f01b5 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -129,14 +129,14 @@ static inline int i8259A_irq_real(unsigned int irq) int irqmask = 1<> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ + outb(0x0A, PIC_SLAVE_CMD); /* back to the IRR register */ return value; } From d23b200a75f78e62744c3c25d078855eec8a689b Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:36 +0200 Subject: [PATCH 067/821] x86: make init_ISA_irqs() static Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/i8259_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c index b44095efcf83..31f49e8f46a7 100644 --- a/arch/x86/kernel/i8259_64.c +++ b/arch/x86/kernel/i8259_64.c @@ -134,7 +134,7 @@ DEFINE_PER_CPU(vector_irq_t, vector_irq) = { [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 }; -void __init init_ISA_irqs (void) +static void __init init_ISA_irqs (void) { int i; From ec42418f1973e1f77da1fcca3be59c0acb878a9d Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 24 May 2008 15:59:58 +0200 Subject: [PATCH 068/821] x86: rename the i8259_32/64.c leftovers to irqinit_32/64.c The leftovers of the i8259 unification have nothing to do with i8259 at all. They contain interrupt init code and the i8259_xx name is just misleading now. Rename them to irqinit_32/64.c Signed-off-by: Thomas Gleixner --- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/{i8259_32.c => irqinit_32.c} | 0 arch/x86/kernel/{i8259_64.c => irqinit_64.c} | 0 3 files changed, 1 insertion(+), 1 deletion(-) rename arch/x86/kernel/{i8259_32.c => irqinit_32.c} (100%) rename arch/x86/kernel/{i8259_64.c => irqinit_64.c} (100%) diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index f71a76ef2596..2a53ad2cb450 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -18,7 +18,7 @@ CFLAGS_tsc_64.o := $(nostackp) obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o obj-y += traps_$(BITS).o irq_$(BITS).o obj-y += time_$(BITS).o ioport.o ldt.o -obj-y += setup_$(BITS).o i8259.o i8259_$(BITS).o setup.o +obj-y += setup_$(BITS).o i8259.o irqinit_$(BITS).o setup.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/irqinit_32.c similarity index 100% rename from arch/x86/kernel/i8259_32.c rename to arch/x86/kernel/irqinit_32.c diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/irqinit_64.c similarity index 100% rename from arch/x86/kernel/i8259_64.c rename to arch/x86/kernel/irqinit_64.c From 3711ccb07b7f0a13f4f1aa16a8fdca9c930f21ca Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 24 May 2008 17:24:34 +0200 Subject: [PATCH 069/821] x86: fixup the fallout of the bitops changes Signed-off-by: Thomas Gleixner --- include/asm-x86/thread_info.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index 25d710532561..895339d2bc0b 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -245,7 +245,7 @@ static inline void set_restore_sigmask(void) { struct thread_info *ti = current_thread_info(); ti->status |= TS_RESTORE_SIGMASK; - set_bit(TIF_SIGPENDING, &ti->flags); + set_bit(TIF_SIGPENDING, (unsigned long *)&ti->flags); } #endif /* !__ASSEMBLY__ */ From 63687a528c39a67c1a213cdffa09feb0e6af9dbe Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 12 May 2008 15:44:41 +0200 Subject: [PATCH 070/821] x86: move tracedata to RODATA .. allowing it to be write-protected just as other read-only data under CONFIG_DEBUG_RODATA. Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/vmlinux_32.lds.S | 7 ------- arch/x86/kernel/vmlinux_64.lds.S | 7 ------- drivers/base/power/trace.c | 2 +- include/asm-generic/vmlinux.lds.h | 14 ++++++++++++++ include/asm-x86/resume-trace.h | 2 +- include/linux/resume-trace.h | 2 +- 6 files changed, 17 insertions(+), 17 deletions(-) diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S index ce5ed083a1e9..2674f5796275 100644 --- a/arch/x86/kernel/vmlinux_32.lds.S +++ b/arch/x86/kernel/vmlinux_32.lds.S @@ -60,13 +60,6 @@ SECTIONS BUG_TABLE :text - . = ALIGN(4); - .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { - __tracedata_start = .; - *(.tracedata) - __tracedata_end = .; - } - RODATA /* writeable */ diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S index fad3674b06a5..687041bfbae5 100644 --- a/arch/x86/kernel/vmlinux_64.lds.S +++ b/arch/x86/kernel/vmlinux_64.lds.S @@ -53,13 +53,6 @@ SECTIONS RODATA - . = ALIGN(4); - .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { - __tracedata_start = .; - *(.tracedata) - __tracedata_end = .; - } - . = ALIGN(PAGE_SIZE); /* Align data segment to page size boundary */ /* Data */ .data : AT(ADDR(.data) - LOAD_OFFSET) { diff --git a/drivers/base/power/trace.c b/drivers/base/power/trace.c index 2b4b392dcbc1..87a7f1d02578 100644 --- a/drivers/base/power/trace.c +++ b/drivers/base/power/trace.c @@ -153,7 +153,7 @@ EXPORT_SYMBOL(set_trace_device); * it's not any guarantee, but it's a high _likelihood_ that * the match is valid). */ -void generate_resume_trace(void *tracedata, unsigned int user) +void generate_resume_trace(const void *tracedata, unsigned int user) { unsigned short lineno = *(unsigned short *)tracedata; const char *file = *(const char **)(tracedata + 2); diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index f054778e916c..f1992dc5c424 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -93,6 +93,8 @@ VMLINUX_SYMBOL(__end_rio_route_ops) = .; \ } \ \ + TRACEDATA \ + \ /* Kernel symbol table: Normal symbols */ \ __ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start___ksymtab) = .; \ @@ -318,6 +320,18 @@ __stop___bug_table = .; \ } +#ifdef CONFIG_PM_TRACE +#define TRACEDATA \ + . = ALIGN(4); \ + .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { \ + __tracedata_start = .; \ + *(.tracedata) \ + __tracedata_end = .; \ + } +#else +#define TRACEDATA +#endif + #define NOTES \ .notes : AT(ADDR(.notes) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start_notes) = .; \ diff --git a/include/asm-x86/resume-trace.h b/include/asm-x86/resume-trace.h index 2557514d7ef6..8d9f0b41ee86 100644 --- a/include/asm-x86/resume-trace.h +++ b/include/asm-x86/resume-trace.h @@ -6,7 +6,7 @@ #define TRACE_RESUME(user) \ do { \ if (pm_trace_enabled) { \ - void *tracedata; \ + const void *tracedata; \ asm volatile(_ASM_MOV_UL " $1f,%0\n" \ ".section .tracedata,\"a\"\n" \ "1:\t.word %c1\n\t" \ diff --git a/include/linux/resume-trace.h b/include/linux/resume-trace.h index f3f4f28c6960..c9ba2fdf807d 100644 --- a/include/linux/resume-trace.h +++ b/include/linux/resume-trace.h @@ -8,7 +8,7 @@ extern int pm_trace_enabled; struct device; extern void set_trace_device(struct device *); -extern void generate_resume_trace(void *tracedata, unsigned int user); +extern void generate_resume_trace(const void *tracedata, unsigned int user); #define TRACE_DEVICE(dev) do { \ if (pm_trace_enabled) \ From a2eddfa95919a730e0e5ed17e9c303fe5ba249cd Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 12 May 2008 15:44:41 +0200 Subject: [PATCH 071/821] x86: make /proc/stat account for all interrupts LAPIC interrupts, which don't go through the generic interrupt handling code, aren't accounted for in /proc/stat. Hence this patch adds a mechanism architectures can use to accordingly adjust the statistics. Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/irq_32.c | 38 ++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/irq_64.c | 28 ++++++++++++++++++++++++++++ fs/proc/proc_misc.c | 9 +++++++++ include/asm-x86/hardirq.h | 6 ++++++ 4 files changed, 81 insertions(+) diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c index 147352df28b9..468acd04aa2e 100644 --- a/arch/x86/kernel/irq_32.c +++ b/arch/x86/kernel/irq_32.c @@ -313,16 +313,20 @@ skip: per_cpu(irq_stat,j).irq_tlb_count); seq_printf(p, " TLB shootdowns\n"); #endif +#ifdef CONFIG_X86_MCE seq_printf(p, "TRM: "); for_each_online_cpu(j) seq_printf(p, "%10u ", per_cpu(irq_stat,j).irq_thermal_count); seq_printf(p, " Thermal event interrupts\n"); +#endif +#ifdef CONFIG_X86_LOCAL_APIC seq_printf(p, "SPU: "); for_each_online_cpu(j) seq_printf(p, "%10u ", per_cpu(irq_stat,j).irq_spurious_count); seq_printf(p, " Spurious interrupts\n"); +#endif seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); #if defined(CONFIG_X86_IO_APIC) seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count)); @@ -331,6 +335,40 @@ skip: return 0; } +/* + * /proc/stat helpers + */ +u64 arch_irq_stat_cpu(unsigned int cpu) +{ + u64 sum = nmi_count(cpu); + +#ifdef CONFIG_X86_LOCAL_APIC + sum += per_cpu(irq_stat, cpu).apic_timer_irqs; +#endif +#ifdef CONFIG_SMP + sum += per_cpu(irq_stat, cpu).irq_resched_count; + sum += per_cpu(irq_stat, cpu).irq_call_count; + sum += per_cpu(irq_stat, cpu).irq_tlb_count; +#endif +#ifdef CONFIG_X86_MCE + sum += per_cpu(irq_stat, cpu).irq_thermal_count; +#endif +#ifdef CONFIG_X86_LOCAL_APIC + sum += per_cpu(irq_stat, cpu).irq_spurious_count; +#endif + return sum; +} + +u64 arch_irq_stat(void) +{ + u64 sum = atomic_read(&irq_err_count); + +#ifdef CONFIG_X86_IO_APIC + sum += atomic_read(&irq_mis_count); +#endif + return sum; +} + #ifdef CONFIG_HOTPLUG_CPU #include diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c index 3aac15466a91..1f78b238d8d2 100644 --- a/arch/x86/kernel/irq_64.c +++ b/arch/x86/kernel/irq_64.c @@ -135,6 +135,7 @@ skip: seq_printf(p, "%10u ", cpu_pda(j)->irq_tlb_count); seq_printf(p, " TLB shootdowns\n"); #endif +#ifdef CONFIG_X86_MCE seq_printf(p, "TRM: "); for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_thermal_count); @@ -143,6 +144,7 @@ skip: for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_threshold_count); seq_printf(p, " Threshold APIC interrupts\n"); +#endif seq_printf(p, "SPU: "); for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_spurious_count); @@ -152,6 +154,32 @@ skip: return 0; } +/* + * /proc/stat helpers + */ +u64 arch_irq_stat_cpu(unsigned int cpu) +{ + u64 sum = cpu_pda(cpu)->__nmi_count; + + sum += cpu_pda(cpu)->apic_timer_irqs; +#ifdef CONFIG_SMP + sum += cpu_pda(cpu)->irq_resched_count; + sum += cpu_pda(cpu)->irq_call_count; + sum += cpu_pda(cpu)->irq_tlb_count; +#endif +#ifdef CONFIG_X86_MCE + sum += cpu_pda(cpu)->irq_thermal_count; + sum += cpu_pda(cpu)->irq_threshold_count; +#endif + sum += cpu_pda(cpu)->irq_spurious_count; + return sum; +} + +u64 arch_irq_stat(void) +{ + return atomic_read(&irq_err_count); +} + /* * do_IRQ handles all normal device IRQ's (the special * SMP cross-CPU interrupts have their own specific diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c index 74a323d2b850..903e617bec58 100644 --- a/fs/proc/proc_misc.c +++ b/fs/proc/proc_misc.c @@ -472,6 +472,13 @@ static const struct file_operations proc_vmalloc_operations = { }; #endif +#ifndef arch_irq_stat_cpu +#define arch_irq_stat_cpu(cpu) 0 +#endif +#ifndef arch_irq_stat +#define arch_irq_stat() 0 +#endif + static int show_stat(struct seq_file *p, void *v) { int i; @@ -509,7 +516,9 @@ static int show_stat(struct seq_file *p, void *v) sum += temp; per_irq_sum[j] += temp; } + sum += arch_irq_stat_cpu(i); } + sum += arch_irq_stat(); seq_printf(p, "cpu %llu %llu %llu %llu %llu %llu %llu %llu %llu\n", (unsigned long long)cputime64_to_clock_t(user), diff --git a/include/asm-x86/hardirq.h b/include/asm-x86/hardirq.h index 314434d664e7..000787df66e6 100644 --- a/include/asm-x86/hardirq.h +++ b/include/asm-x86/hardirq.h @@ -3,3 +3,9 @@ #else # include "hardirq_64.h" #endif + +extern u64 arch_irq_stat_cpu(unsigned int cpu); +#define arch_irq_stat_cpu arch_irq_stat_cpu + +extern u64 arch_irq_stat(void); +#define arch_irq_stat arch_irq_stat From c2c14fb7afcc67b48724571506e095fccc65a670 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:36 +0200 Subject: [PATCH 072/821] x86: tsc_64.c make constant UL arch/x86/kernel/tsc_64.c:245:13: warning: constant 0x100000000 is so big it is long Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/tsc_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c index fcc16e58609e..c19b0e273ef1 100644 --- a/arch/x86/kernel/tsc_64.c +++ b/arch/x86/kernel/tsc_64.c @@ -242,7 +242,7 @@ void __init tsc_calibrate(void) if (hpet) { printk(KERN_INFO "TSC calibrated against HPET\n"); if (hpet2 < hpet1) - hpet2 += 0x100000000; + hpet2 += 0x100000000UL; hpet2 -= hpet1; tsc1 = (hpet2 * hpet_readl(HPET_PERIOD)) / 1000000; } else { From e6b0edef3453677b13e175a104a83eb36d062dd3 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Mon, 12 May 2008 15:43:38 +0200 Subject: [PATCH 073/821] x86: clean up vdso_enabled type on x86_64 This fixes type of "vdso_enabled" on X86_64 to match extern in asm/elf.h. Signed-off-by: OGAWA Hirofumi Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/vdso/vma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/vdso/vma.c b/arch/x86/vdso/vma.c index 3fdd51497a83..19a6cfaf5db9 100644 --- a/arch/x86/vdso/vma.c +++ b/arch/x86/vdso/vma.c @@ -16,7 +16,7 @@ #include "vextern.h" /* Just for VMAGIC. */ #undef VEXTERN -int vdso_enabled = 1; +unsigned int __read_mostly vdso_enabled = 1; extern char vdso_start[], vdso_end[]; extern unsigned short vdso_sync_cpuid; From 46dd98a5c0b907f94742579ab605be1933a37abd Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 14 May 2008 16:10:39 -0700 Subject: [PATCH 074/821] arch/x86/mm/pat.c: use boot_cpu_has() arch/x86/mm/pat.c: In function 'phys_mem_access_prot_allowed': arch/x86/mm/pat.c:526: warning: passing argument 2 of 'constant_test_bit' from incompatible pointer type arch/x86/mm/pat.c:526: warning: passing argument 2 of 'variable_test_bit' from incompatible pointer type arch/x86/mm/pat.c:527: warning: passing argument 2 of 'constant_test_bit' from incompatible pointer type arch/x86/mm/pat.c:527: warning: passing argument 2 of 'variable_test_bit' from incompatible pointer type arch/x86/mm/pat.c:528: warning: passing argument 2 of 'constant_test_bit' from incompatible pointer type arch/x86/mm/pat.c:528: warning: passing argument 2 of 'variable_test_bit' from incompatible pointer type arch/x86/mm/pat.c:529: warning: passing argument 2 of 'constant_test_bit' from incompatible pointer type arch/x86/mm/pat.c:529: warning: passing argument 2 of 'variable_test_bit' from incompatible pointer type Don't open-code test_bit() on a __u32 Cc: Andrea Arcangeli Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- arch/x86/mm/pat.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index a1cbea0b79b1..e83b770676d5 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -536,10 +536,10 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, * we maintain the tradition of paranoia in this code. */ if (!pat_wc_enabled && - ! ( test_bit(X86_FEATURE_MTRR, boot_cpu_data.x86_capability) || - test_bit(X86_FEATURE_K6_MTRR, boot_cpu_data.x86_capability) || - test_bit(X86_FEATURE_CYRIX_ARR, boot_cpu_data.x86_capability) || - test_bit(X86_FEATURE_CENTAUR_MCR, boot_cpu_data.x86_capability)) && + ! ( boot_cpu_has(X86_FEATURE_MTRR) || + boot_cpu_has(X86_FEATURE_K6_MTRR) || + boot_cpu_has(X86_FEATURE_CYRIX_ARR) || + boot_cpu_has(X86_FEATURE_CENTAUR_MCR)) && (pfn << PAGE_SHIFT) >= __pa(high_memory)) { flags = _PAGE_CACHE_UC; } From 5136dea5734cfddbc6d7ccb7ead85a3ac7ce3de2 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 14 May 2008 16:10:41 -0700 Subject: [PATCH 075/821] x86: bitops take an unsigned long * All (or most) other architectures do this. So should x86. Fix. Cc: Andrea Arcangeli Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/bitops.h | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/include/asm-x86/bitops.h b/include/asm-x86/bitops.h index ee4b3ead6a43..7d2494bdc660 100644 --- a/include/asm-x86/bitops.h +++ b/include/asm-x86/bitops.h @@ -43,7 +43,7 @@ * Note that @nr may be almost arbitrarily large; this function is not * restricted to acting on a single-word quantity. */ -static inline void set_bit(int nr, volatile void *addr) +static inline void set_bit(int nr, volatile unsigned long *addr) { asm volatile(LOCK_PREFIX "bts %1,%0" : ADDR : "Ir" (nr) : "memory"); } @@ -57,7 +57,7 @@ static inline void set_bit(int nr, volatile void *addr) * If it's called on the same region of memory simultaneously, the effect * may be that only one operation succeeds. */ -static inline void __set_bit(int nr, volatile void *addr) +static inline void __set_bit(int nr, volatile unsigned long *addr) { asm volatile("bts %1,%0" : ADDR : "Ir" (nr) : "memory"); } @@ -72,7 +72,7 @@ static inline void __set_bit(int nr, volatile void *addr) * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() * in order to ensure changes are visible on other processors. */ -static inline void clear_bit(int nr, volatile void *addr) +static inline void clear_bit(int nr, volatile unsigned long *addr) { asm volatile(LOCK_PREFIX "btr %1,%0" : ADDR : "Ir" (nr)); } @@ -85,13 +85,13 @@ static inline void clear_bit(int nr, volatile void *addr) * clear_bit() is atomic and implies release semantics before the memory * operation. It can be used for an unlock. */ -static inline void clear_bit_unlock(unsigned nr, volatile void *addr) +static inline void clear_bit_unlock(unsigned nr, volatile unsigned long *addr) { barrier(); clear_bit(nr, addr); } -static inline void __clear_bit(int nr, volatile void *addr) +static inline void __clear_bit(int nr, volatile unsigned long *addr) { asm volatile("btr %1,%0" : ADDR : "Ir" (nr)); } @@ -108,7 +108,7 @@ static inline void __clear_bit(int nr, volatile void *addr) * No memory barrier is required here, because x86 cannot reorder stores past * older loads. Same principle as spin_unlock. */ -static inline void __clear_bit_unlock(unsigned nr, volatile void *addr) +static inline void __clear_bit_unlock(unsigned nr, volatile unsigned long *addr) { barrier(); __clear_bit(nr, addr); @@ -126,7 +126,7 @@ static inline void __clear_bit_unlock(unsigned nr, volatile void *addr) * If it's called on the same region of memory simultaneously, the effect * may be that only one operation succeeds. */ -static inline void __change_bit(int nr, volatile void *addr) +static inline void __change_bit(int nr, volatile unsigned long *addr) { asm volatile("btc %1,%0" : ADDR : "Ir" (nr)); } @@ -140,7 +140,7 @@ static inline void __change_bit(int nr, volatile void *addr) * Note that @nr may be almost arbitrarily large; this function is not * restricted to acting on a single-word quantity. */ -static inline void change_bit(int nr, volatile void *addr) +static inline void change_bit(int nr, volatile unsigned long *addr) { asm volatile(LOCK_PREFIX "btc %1,%0" : ADDR : "Ir" (nr)); } @@ -153,7 +153,7 @@ static inline void change_bit(int nr, volatile void *addr) * This operation is atomic and cannot be reordered. * It also implies a memory barrier. */ -static inline int test_and_set_bit(int nr, volatile void *addr) +static inline int test_and_set_bit(int nr, volatile unsigned long *addr) { int oldbit; @@ -170,7 +170,7 @@ static inline int test_and_set_bit(int nr, volatile void *addr) * * This is the same as test_and_set_bit on x86. */ -static inline int test_and_set_bit_lock(int nr, volatile void *addr) +static inline int test_and_set_bit_lock(int nr, volatile unsigned long *addr) { return test_and_set_bit(nr, addr); } @@ -184,7 +184,7 @@ static inline int test_and_set_bit_lock(int nr, volatile void *addr) * If two examples of this operation race, one can appear to succeed * but actually fail. You must protect multiple accesses with a lock. */ -static inline int __test_and_set_bit(int nr, volatile void *addr) +static inline int __test_and_set_bit(int nr, volatile unsigned long *addr) { int oldbit; @@ -203,7 +203,7 @@ static inline int __test_and_set_bit(int nr, volatile void *addr) * This operation is atomic and cannot be reordered. * It also implies a memory barrier. */ -static inline int test_and_clear_bit(int nr, volatile void *addr) +static inline int test_and_clear_bit(int nr, volatile unsigned long *addr) { int oldbit; @@ -223,7 +223,7 @@ static inline int test_and_clear_bit(int nr, volatile void *addr) * If two examples of this operation race, one can appear to succeed * but actually fail. You must protect multiple accesses with a lock. */ -static inline int __test_and_clear_bit(int nr, volatile void *addr) +static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr) { int oldbit; @@ -235,7 +235,7 @@ static inline int __test_and_clear_bit(int nr, volatile void *addr) } /* WARNING: non atomic and it can be reordered! */ -static inline int __test_and_change_bit(int nr, volatile void *addr) +static inline int __test_and_change_bit(int nr, volatile unsigned long *addr) { int oldbit; @@ -255,7 +255,7 @@ static inline int __test_and_change_bit(int nr, volatile void *addr) * This operation is atomic and cannot be reordered. * It also implies a memory barrier. */ -static inline int test_and_change_bit(int nr, volatile void *addr) +static inline int test_and_change_bit(int nr, volatile unsigned long *addr) { int oldbit; @@ -266,13 +266,13 @@ static inline int test_and_change_bit(int nr, volatile void *addr) return oldbit; } -static inline int constant_test_bit(int nr, const volatile void *addr) +static inline int constant_test_bit(int nr, const volatile unsigned long *addr) { return ((1UL << (nr % BITS_PER_LONG)) & (((unsigned long *)addr)[nr / BITS_PER_LONG])) != 0; } -static inline int variable_test_bit(int nr, volatile const void *addr) +static inline int variable_test_bit(int nr, volatile const unsigned long *addr) { int oldbit; From eef8f871d84b5df1a24902a4e4700188be1aff2c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:34 +0200 Subject: [PATCH 076/821] x86: vsmp_64 add missing includes sparse mutters: arch/x86/kernel/vsmp_64.c:126:5: warning: symbol 'is_vsmp_box' was not declared. Should it be static? arch/x86/kernel/vsmp_64.c:145:13: warning: symbol 'vsmp_init' was not declared. Should it be static? Include the appropriate headers. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/vsmp_64.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c index ba8c0b75ab0a..0c029e8959c7 100644 --- a/arch/x86/kernel/vsmp_64.c +++ b/arch/x86/kernel/vsmp_64.c @@ -15,9 +15,12 @@ #include #include #include + +#include #include #include #include +#include #if defined CONFIG_PCI && defined CONFIG_PARAVIRT /* From 535694f361419ca195fd915dd5038c926334e1be Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:35 +0200 Subject: [PATCH 077/821] x86: boot/printfc use NULL instead 0 Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/boot/printf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/boot/printf.c b/arch/x86/boot/printf.c index c1d00c0274c4..50e47cdbdddd 100644 --- a/arch/x86/boot/printf.c +++ b/arch/x86/boot/printf.c @@ -56,7 +56,7 @@ static char *number(char *str, long num, int base, int size, int precision, if (type & LEFT) type &= ~ZEROPAD; if (base < 2 || base > 36) - return 0; + return NULL; c = (type & ZEROPAD) ? '0' : ' '; sign = 0; if (type & SIGN) { From 635ee418381566f03819408e1303ef21fcf2d41c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:35 +0200 Subject: [PATCH 078/821] x86: create prototype for (un)map_devmem Global functions need a prototype. Add it. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- include/asm-x86/page.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/include/asm-x86/page.h b/include/asm-x86/page.h index dc936dddf161..ed165097520f 100644 --- a/include/asm-x86/page.h +++ b/include/asm-x86/page.h @@ -51,8 +51,15 @@ #ifndef __ASSEMBLY__ +typedef struct { pgdval_t pgd; } pgd_t; +typedef struct { pgprotval_t pgprot; } pgprot_t; + extern int page_is_ram(unsigned long pagenr); extern int devmem_is_allowed(unsigned long pagenr); +extern void map_devmem(unsigned long pfn, unsigned long size, + pgprot_t vma_prot); +extern void unmap_devmem(unsigned long pfn, unsigned long size, + pgprot_t vma_prot); extern unsigned long max_pfn_mapped; @@ -74,9 +81,6 @@ static inline void copy_user_page(void *to, void *from, unsigned long vaddr, alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr) #define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE -typedef struct { pgdval_t pgd; } pgd_t; -typedef struct { pgprotval_t pgprot; } pgprot_t; - static inline pgd_t native_make_pgd(pgdval_t val) { return (pgd_t) { val }; From 0eafe234a2571f51ef9f7e8baddb58c828750771 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:35 +0200 Subject: [PATCH 079/821] x86: k8topology add missing header k8_scan_nodes is global and needs a prototype. Add the header file which contains it. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/mm/k8topology_64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/mm/k8topology_64.c b/arch/x86/mm/k8topology_64.c index 1f476e477844..48471199887d 100644 --- a/arch/x86/mm/k8topology_64.c +++ b/arch/x86/mm/k8topology_64.c @@ -22,6 +22,7 @@ #include #include #include +#include static __init int find_northbridge(void) { From d34c08958fa36c7a8c3f8d9c0ebe6ec1ab744a68 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:35 +0200 Subject: [PATCH 080/821] x86: k8topology fix shadow variable sparse mutters: arch/x86/mm/k8topology_64.c:108:7: warning: symbol 'nodeid' shadows an earlier one Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/mm/k8topology_64.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/x86/mm/k8topology_64.c b/arch/x86/mm/k8topology_64.c index 48471199887d..36c6c4a91353 100644 --- a/arch/x86/mm/k8topology_64.c +++ b/arch/x86/mm/k8topology_64.c @@ -76,10 +76,10 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end) { unsigned long prevbase; struct bootnode nodes[8]; - int nodeid, i, nb; + int i, nb; unsigned char nodeids[8]; int found = 0; - u32 reg; + u32 nodeid, reg; unsigned numnodes; unsigned cores; unsigned bits; @@ -106,7 +106,6 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end) prevbase = 0; for (i = 0; i < 8; i++) { unsigned long base, limit; - u32 nodeid; base = read_pci_config(0, nb, 1, 0x40 + i*8); limit = read_pci_config(0, nb, 1, 0x44 + i*8); From 55d4f22abc9f011c5db982f83377cdd38bb9a2a3 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:35 +0200 Subject: [PATCH 081/821] x86: k8topology cleanup variable declarations Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/mm/k8topology_64.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/arch/x86/mm/k8topology_64.c b/arch/x86/mm/k8topology_64.c index 36c6c4a91353..0ea66b532c35 100644 --- a/arch/x86/mm/k8topology_64.c +++ b/arch/x86/mm/k8topology_64.c @@ -74,17 +74,12 @@ static __init void early_get_boot_cpu_id(void) int __init k8_scan_nodes(unsigned long start, unsigned long end) { + unsigned numnodes, cores, bits, apicid_base; unsigned long prevbase; struct bootnode nodes[8]; - int i, nb; unsigned char nodeids[8]; - int found = 0; + int i, j, nb, found = 0; u32 nodeid, reg; - unsigned numnodes; - unsigned cores; - unsigned bits; - int j; - unsigned apicid_base; if (!early_pci_allowed()) return -1; From d1097635deed7196c2a859f285c29267779ca45a Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 May 2008 23:42:01 +0200 Subject: [PATCH 082/821] x86: move mmconfig declarations to header arch/x86/kernel/mmconf-fam10h_64.c is missing the prototypes, which are decalred in arch/x86/kernel/setup_64.c. Move the prototypes and the inline stubs to the appropriate header file. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/mmconf-fam10h_64.c | 1 + arch/x86/kernel/setup_64.c | 13 +------------ include/asm-x86/mmconfig.h | 12 ++++++++++++ 3 files changed, 14 insertions(+), 12 deletions(-) create mode 100644 include/asm-x86/mmconfig.h diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c index edc5fbfe85c0..fdfdc550b366 100644 --- a/arch/x86/kernel/mmconf-fam10h_64.c +++ b/arch/x86/kernel/mmconf-fam10h_64.c @@ -12,6 +12,7 @@ #include #include #include +#include #include "../pci/pci.h" diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 6dff1286ad8a..341230db74e1 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -71,6 +71,7 @@ #include #include #include +#include #include #ifdef CONFIG_PARAVIRT @@ -293,18 +294,6 @@ static void __init parse_setup_data(void) } } -#ifdef CONFIG_PCI_MMCONFIG -extern void __cpuinit fam10h_check_enable_mmcfg(void); -extern void __init check_enable_amd_mmconf_dmi(void); -#else -void __cpuinit fam10h_check_enable_mmcfg(void) -{ -} -void __init check_enable_amd_mmconf_dmi(void) -{ -} -#endif - /* * setup_arch - architecture-specific boot-time initializations * diff --git a/include/asm-x86/mmconfig.h b/include/asm-x86/mmconfig.h new file mode 100644 index 000000000000..95beda07c6fa --- /dev/null +++ b/include/asm-x86/mmconfig.h @@ -0,0 +1,12 @@ +#ifndef _ASM_MMCONFIG_H +#define _ASM_MMCONFIG_H + +#ifdef CONFIG_PCI_MMCONFIG +extern void __cpuinit fam10h_check_enable_mmcfg(void); +extern void __init check_enable_amd_mmconf_dmi(void); +#else +static inline void fam10h_check_enable_mmcfg(void) { } +static inline void check_enable_amd_mmconf_dmi(void) { } +#endif + +#endif From 11034d55975be6d8b955a6eb11e87fc67ec086c2 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:36 +0200 Subject: [PATCH 083/821] x86: init64.c include initrd.h free_initrd_mem needs a prototype, which is in linux/initrd.h Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/mm/init_64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 32ba13b0f818..18123096cdb9 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include From e0b32d768cad17af07af3aced67498bde98296c9 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:37 +0200 Subject: [PATCH 084/821] x86: make command_line static in setup_64.c Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 341230db74e1..78c1be69c6d3 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -119,7 +119,7 @@ EXPORT_SYMBOL_GPL(edid_info); extern int root_mountflags; -char __initdata command_line[COMMAND_LINE_SIZE]; +static char __initdata command_line[COMMAND_LINE_SIZE]; static struct resource standard_io_resources[] = { { .name = "dma1", .start = 0x00, .end = 0x1f, From 968cbfad1a727b5689ae620f4d970abf6ce73340 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:37 +0200 Subject: [PATCH 085/821] x86: make __pci_mmcfg_init static in mmconfig-shared.c Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/pci/mmconfig-shared.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c index 0cfebecf2a8f..23faaa890ffc 100644 --- a/arch/x86/pci/mmconfig-shared.c +++ b/arch/x86/pci/mmconfig-shared.c @@ -374,7 +374,7 @@ reject: static int __initdata known_bridge; -void __init __pci_mmcfg_init(int early) +static void __init __pci_mmcfg_init(int early) { /* MMCONFIG disabled */ if ((pci_probe & PCI_PROBE_MMCONF) == 0) From 311f83494830fec17f086401a5b43984bb447cd2 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 12 May 2008 15:43:37 +0200 Subject: [PATCH 086/821] x86: kernel/pci-dma.c cleanups This patch contains the following cleanups: - make the following needlessly global code static: - dma_alloc_pages() Signed-off-by: Adrian Bunk Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/pci-dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index c5ef1af8e79d..5bc29ca4196e 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -357,7 +357,7 @@ int dma_supported(struct device *dev, u64 mask) EXPORT_SYMBOL(dma_supported); /* Allocate DMA memory on node near device */ -noinline struct page * +static noinline struct page * dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order) { int node; From cca7c0850fa0381639bf84dd06ee900e16346373 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 12 May 2008 15:43:37 +0200 Subject: [PATCH 087/821] x86_64: fix mm.txt documentation Commit 85eb69a16aab5a394ce043c2131319eae35e6493 introduced 512 MiB sized kernel and 1.5 GiB sized module space but omitted to change documentation properly. Fix that. [Wasn't the hole intentional protection hole?] Signed-off-by: Jiri Slaby Cc: Andi Kleen Cc: hpa@zytor.com Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- Documentation/x86_64/mm.txt | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/Documentation/x86_64/mm.txt b/Documentation/x86_64/mm.txt index b89b6d2bebfa..efce75097369 100644 --- a/Documentation/x86_64/mm.txt +++ b/Documentation/x86_64/mm.txt @@ -11,9 +11,8 @@ ffffc10000000000 - ffffc1ffffffffff (=40 bits) hole ffffc20000000000 - ffffe1ffffffffff (=45 bits) vmalloc/ioremap space ffffe20000000000 - ffffe2ffffffffff (=40 bits) virtual memory map (1TB) ... unused hole ... -ffffffff80000000 - ffffffff82800000 (=40 MB) kernel text mapping, from phys 0 -... unused hole ... -ffffffff88000000 - fffffffffff00000 (=1919 MB) module mapping space +ffffffff80000000 - ffffffffa0000000 (=512 MB) kernel text mapping, from phys 0 +ffffffffa0000000 - fffffffffff00000 (=1536 MB) module mapping space The direct mapping covers all memory in the system up to the highest memory address (this means in some cases it can also include PCI memory From 6a1673ae2201931ce34bf7ba9f90928c864d8334 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:38 +0200 Subject: [PATCH 088/821] x86: make memory_add_physaddr_to_nid depend on MEMORY_HOTPLUG memory_add_physaddr_to_nid() is only used in the CONFIG_MEMORY_HOTPLUG_SPARSE || CONFIG_ACPI_HOTPLUG_MEMORY case. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/mm/srat_64.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 3890234e5b26..f6d0584cbf38 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -522,6 +522,7 @@ int __node_distance(int a, int b) EXPORT_SYMBOL(__node_distance); +#if defined(CONFIG_MEMORY_HOTPLUG_SPARSE) || defined(CONFIG_ACPI_HOTPLUG_MEMORY) int memory_add_physaddr_to_nid(u64 start) { int i, ret = 0; @@ -533,4 +534,4 @@ int memory_add_physaddr_to_nid(u64 start) return ret; } EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid); - +#endif From 4e50e62ce52f39b5f45e82f68b18254458b429bb Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 12 May 2008 15:43:38 +0200 Subject: [PATCH 089/821] x86: eliminate duplicate consistency checks in init_32.c Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/mm/init_32.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index ec30d10154b6..4834c0fcb6b7 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -571,17 +571,6 @@ void __init mem_init(void) #endif bad_ppro = ppro_with_ram_bug(); -#ifdef CONFIG_HIGHMEM - /* check that fixmap and pkmap do not overlap */ - if (PKMAP_BASE + LAST_PKMAP*PAGE_SIZE >= FIXADDR_START) { - printk(KERN_ERR - "fixmap and kmap areas overlap - this will crash\n"); - printk(KERN_ERR "pkstart: %lxh pkend: %lxh fixstart %lxh\n", - PKMAP_BASE, PKMAP_BASE + LAST_PKMAP*PAGE_SIZE, - FIXADDR_START); - BUG(); - } -#endif /* this will put all low memory onto the freelists */ totalram_pages += free_all_bootmem(); @@ -614,7 +603,6 @@ void __init mem_init(void) (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)) ); -#if 1 /* double-sanity-check paranoia */ printk(KERN_INFO "virtual kernel memory layout:\n" " fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n" #ifdef CONFIG_HIGHMEM @@ -655,7 +643,6 @@ void __init mem_init(void) #endif BUG_ON(VMALLOC_START > VMALLOC_END); BUG_ON((unsigned long)high_memory > VMALLOC_START); -#endif /* double-sanity-check paranoia */ if (boot_cpu_data.wp_works_ok < 0) test_wp_bit(); From 4c8ab98249fa3cead320ec0ee4cde9960b951989 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 12 May 2008 15:43:38 +0200 Subject: [PATCH 090/821] i386: move FIX_ACPI_* into non-permanent range .. as they are used at early boot time only. Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/fixmap_32.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/asm-x86/fixmap_32.h b/include/asm-x86/fixmap_32.h index 4b96148e90c1..f0df7ee96816 100644 --- a/include/asm-x86/fixmap_32.h +++ b/include/asm-x86/fixmap_32.h @@ -79,10 +79,6 @@ enum fixed_addresses { FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, #endif -#ifdef CONFIG_ACPI - FIX_ACPI_BEGIN, - FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1, -#endif #ifdef CONFIG_PCI_MMCONFIG FIX_PCIE_MCFG, #endif @@ -103,6 +99,10 @@ enum fixed_addresses { (__end_of_permanent_fixed_addresses & 511), FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_NESTING - 1, FIX_WP_TEST, +#ifdef CONFIG_ACPI + FIX_ACPI_BEGIN, + FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1, +#endif #ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT FIX_OHCI1394_BASE, #endif From ebdd561a19d7917ac49fff9c355aa4833c504bf1 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 12 May 2008 15:43:38 +0200 Subject: [PATCH 091/821] x86: constify data in reboot.c Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/reboot.c | 18 +++++++++--------- arch/x86/kernel/reboot_fixups_32.c | 4 ++-- include/asm-x86/reboot.h | 2 +- 3 files changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index f6be7d5f82f8..f8a62160e151 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -27,7 +27,7 @@ void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); -static long no_idt[3]; +static const struct desc_ptr no_idt = {}; static int reboot_mode; enum reboot_type reboot_type = BOOT_KBD; int reboot_force; @@ -201,15 +201,15 @@ core_initcall(reboot_init); controller to pulse the CPU reset line, which is more thorough, but doesn't work with at least one type of 486 motherboard. It is easy to stop this code working; hence the copious comments. */ -static unsigned long long +static const unsigned long long real_mode_gdt_entries [3] = { 0x0000000000000000ULL, /* Null descriptor */ - 0x00009a000000ffffULL, /* 16-bit real-mode 64k code at 0x00000000 */ - 0x000092000100ffffULL /* 16-bit real-mode 64k data at 0x00000100 */ + 0x00009b000000ffffULL, /* 16-bit real-mode 64k code at 0x00000000 */ + 0x000093000100ffffULL /* 16-bit real-mode 64k data at 0x00000100 */ }; -static struct desc_ptr +static const struct desc_ptr real_mode_gdt = { sizeof (real_mode_gdt_entries) - 1, (long)real_mode_gdt_entries }, real_mode_idt = { 0x3ff, 0 }; @@ -231,7 +231,7 @@ real_mode_idt = { 0x3ff, 0 }; More could be done here to set up the registers as if a CPU reset had occurred; hopefully real BIOSs don't assume much. */ -static unsigned char real_mode_switch [] = +static const unsigned char real_mode_switch [] = { 0x66, 0x0f, 0x20, 0xc0, /* movl %cr0,%eax */ 0x66, 0x83, 0xe0, 0x11, /* andl $0x00000011,%eax */ @@ -245,7 +245,7 @@ static unsigned char real_mode_switch [] = 0x24, 0x10, /* f: andb $0x10,al */ 0x66, 0x0f, 0x22, 0xc0 /* movl %eax,%cr0 */ }; -static unsigned char jump_to_bios [] = +static const unsigned char jump_to_bios [] = { 0xea, 0x00, 0x00, 0xff, 0xff /* ljmp $0xffff,$0x0000 */ }; @@ -255,7 +255,7 @@ static unsigned char jump_to_bios [] = * specified by the code and length parameters. * We assume that length will aways be less that 100! */ -void machine_real_restart(unsigned char *code, int length) +void machine_real_restart(const unsigned char *code, int length) { local_irq_disable(); @@ -368,7 +368,7 @@ static void native_machine_emergency_restart(void) } case BOOT_TRIPLE: - load_idt((const struct desc_ptr *)&no_idt); + load_idt(&no_idt); __asm__ __volatile__("int3"); reboot_type = BOOT_KBD; diff --git a/arch/x86/kernel/reboot_fixups_32.c b/arch/x86/kernel/reboot_fixups_32.c index dec0b5ec25c2..61a837743fe5 100644 --- a/arch/x86/kernel/reboot_fixups_32.c +++ b/arch/x86/kernel/reboot_fixups_32.c @@ -49,7 +49,7 @@ struct device_fixup { void (*reboot_fixup)(struct pci_dev *); }; -static struct device_fixup fixups_table[] = { +static const struct device_fixup fixups_table[] = { { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset }, { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset }, { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE, cs5530a_warm_reset }, @@ -64,7 +64,7 @@ static struct device_fixup fixups_table[] = { */ void mach_reboot_fixups(void) { - struct device_fixup *cur; + const struct device_fixup *cur; struct pci_dev *dev; int i; diff --git a/include/asm-x86/reboot.h b/include/asm-x86/reboot.h index e63741f19392..206f355786dc 100644 --- a/include/asm-x86/reboot.h +++ b/include/asm-x86/reboot.h @@ -14,8 +14,8 @@ struct machine_ops { extern struct machine_ops machine_ops; -void machine_real_restart(unsigned char *code, int length); void native_machine_crash_shutdown(struct pt_regs *regs); void native_machine_shutdown(void); +void machine_real_restart(const unsigned char *code, int length); #endif /* _ASM_REBOOT_H */ From 9831bfb201a8e00415d0f9e5b5a50d902a90b2db Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Mon, 12 May 2008 15:43:38 +0200 Subject: [PATCH 092/821] x86 - hide X86_VM_MASK from userland programs v3 X86_VM_MASK is kernel specific flags so hide it from userland programs. It should be defined *before* ptrace.h inclusion because of circular link between these files Signed-off-by: Cyrill Gorcunov Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/vm86.h | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/include/asm-x86/vm86.h b/include/asm-x86/vm86.h index 074b357146df..cbf4a0effa75 100644 --- a/include/asm-x86/vm86.h +++ b/include/asm-x86/vm86.h @@ -14,12 +14,6 @@ #include -#ifdef CONFIG_VM86 -#define X86_VM_MASK X86_EFLAGS_VM -#else -#define X86_VM_MASK 0 /* No VM86 support */ -#endif - #define BIOSSEG 0x0f000 #define CPU_086 0 @@ -133,6 +127,13 @@ struct vm86plus_struct { }; #ifdef __KERNEL__ + +#ifdef CONFIG_VM86 +#define X86_VM_MASK X86_EFLAGS_VM +#else +#define X86_VM_MASK 0 /* No VM86 support */ +#endif + /* * This is the (kernel) stack-layout when we have done a "SAVE_ALL" from vm86 * mode - the main change is that the old segment descriptors aren't From 369101da7e3f6f971b7303922d2978b8483241c6 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Mon, 12 May 2008 15:43:38 +0200 Subject: [PATCH 093/821] x86: head_64.S cleanup - use predefined flags from processor-flags.h We should better use already defined flags from processor-flags.h instead of defining own ones [>>> object code check >>>] original md5sum: 9cfa6dbf045a046bb5dfb85f8bcfe8c4 arch/x86/kernel/head_64.o text data bss dec hex filename 37361 4432 8192 49985 c341 arch/x86/kernel/head_64.o patched md5sum: 9cfa6dbf045a046bb5dfb85f8bcfe8c4 arch/x86/kernel/head_64.o text data bss dec hex filename 37361 4432 8192 49985 c341 arch/x86/kernel/head_64.o [<<< object code check <<<] Signed-off-by: Cyrill Gorcunov Acked-by: H. Peter Anvin Signed-off-by: Ingo Molnar --- arch/x86/kernel/head_64.S | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 10a1955bb1d1..2f59ca8bd16c 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -18,6 +18,7 @@ #include #include #include +#include #ifdef CONFIG_PARAVIRT #include @@ -184,14 +185,10 @@ ENTRY(secondary_startup_64) 1: wrmsr /* Make changes effective */ /* Setup cr0 */ -#define CR0_PM 1 /* protected mode */ -#define CR0_MP (1<<1) -#define CR0_ET (1<<4) -#define CR0_NE (1<<5) -#define CR0_WP (1<<16) -#define CR0_AM (1<<18) -#define CR0_PAGING (1<<31) - movl $CR0_PM|CR0_MP|CR0_ET|CR0_NE|CR0_WP|CR0_AM|CR0_PAGING,%eax +#define CR0_STATE (X86_CR0_PE | X86_CR0_MP | X86_CR0_ET | \ + X86_CR0_NE | X86_CR0_WP | X86_CR0_AM | \ + X86_CR0_PG) + movl $CR0_STATE, %eax /* Make changes effective */ movq %rax, %cr0 From e83e31f41a623262714d9c56dde7dfc51ac078f7 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Mon, 12 May 2008 15:43:39 +0200 Subject: [PATCH 094/821] x86: compressed/head_64.S cleanup - use predefined flags from processor-flags.h We should better use already defined flags from processor-flags.h instead of defining own ones [>>> object code check >>>] original md5sum: 129f24be6df396fb7d8bf998c01fc716 arch/x86/boot/compressed/head_64.o text data bss dec hex filename 705 48 45056 45809 b2f1 arch/x86/boot/compressed/head_64.o patched md5sum: 129f24be6df396fb7d8bf998c01fc716 arch/x86/boot/compressed/head_64-new.o text data bss dec hex filename 705 48 45056 45809 b2f1 arch/x86/boot/compressed/head_64-new.o [<<< object code check <<<] Signed-off-by: Cyrill Gorcunov Acked-by: H. Peter Anvin Signed-off-by: Ingo Molnar --- arch/x86/boot/compressed/head_64.S | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index d8819efac81d..1d5dff4123e1 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -30,6 +30,7 @@ #include #include #include +#include #include .section ".text.head" @@ -109,7 +110,7 @@ startup_32: /* Enable PAE mode */ xorl %eax, %eax - orl $(1 << 5), %eax + orl $(X86_CR4_PAE), %eax movl %eax, %cr4 /* @@ -170,7 +171,7 @@ startup_32: pushl %eax /* Enter paged protected Mode, activating Long Mode */ - movl $0x80000001, %eax /* Enable Paging and Protected mode */ + movl $(X86_CR0_PG | X86_CR0_PE), %eax /* Enable Paging and Protected mode */ movl %eax, %cr0 /* Jump from 32bit compatibility mode into 64bit mode. */ From 2cc74111c78dbc7b26c41b4e87cfebfc3aed49c4 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sun, 11 May 2008 19:35:54 +0800 Subject: [PATCH 095/821] x86: ipi.c: removed duplicated include Removed duplicated include in arch/x86/kernel/ipi.c. Signed-off-by: Huang Weiyi Cc: mingo@redhat.com Cc: hpa@zytor.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/ipi.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c index c0df7b89ca23..9d98cda39ad9 100644 --- a/arch/x86/kernel/ipi.c +++ b/arch/x86/kernel/ipi.c @@ -8,7 +8,6 @@ #include #include #include -#include #include #include From 883b7af932b4435eb4798cfa4fec0848639c2a87 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sun, 11 May 2008 19:36:57 +0800 Subject: [PATCH 096/821] x86: smpboot.c: removed duplicated include Removed duplicated include in arch/x86/kernel/smpboot.c. Signed-off-by: Huang Weiyi Cc: mingo@redhat.com Cc: hpa@zytor.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/smpboot.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 38988491c622..0974fc0997b9 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -59,7 +59,6 @@ #include #include #include -#include #include #include #include From 2237ce2057b82561f7ea27ed30153571f404112d Mon Sep 17 00:00:00 2001 From: Fernando Luis Vazquez Cao Date: Fri, 16 May 2008 11:01:26 +0900 Subject: [PATCH 097/821] x86: cleanup, remove duplicate declaration of unknown_nmi_panic Signed-off-by: Fernando Luis Vazquez Cao Signed-off-by: Ingo Molnar --- include/asm-x86/nmi.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/asm-x86/nmi.h b/include/asm-x86/nmi.h index 1e363021e72f..8455bf36d8df 100644 --- a/include/asm-x86/nmi.h +++ b/include/asm-x86/nmi.h @@ -46,7 +46,6 @@ extern void nmi_watchdog_default(void); extern int check_nmi_watchdog(void); extern int nmi_watchdog_enabled; -extern int unknown_nmi_panic; extern int avail_to_resrv_perfctr_nmi_bit(unsigned int); extern int avail_to_resrv_perfctr_nmi(unsigned int); extern int reserve_perfctr_nmi(unsigned int); From 05139d8fb445d9a3569071af1c5920fc46191b7b Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Tue, 13 May 2008 21:14:22 +0400 Subject: [PATCH 098/821] x86: head_64.S cleanup - use straight move to CR4 register Signed-off-by: Cyrill Gorcunov Signed-off-by: Ingo Molnar --- arch/x86/kernel/head_64.S | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 2f59ca8bd16c..7475b4c91f05 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -155,9 +155,7 @@ ENTRY(secondary_startup_64) */ /* Enable PAE mode and PGE */ - xorq %rax, %rax - btsq $5, %rax - btsq $7, %rax + movl $(X86_CR4_PAE | X86_CR4_PGE), %eax movq %rax, %cr4 /* Setup early boot stage 4 level pagetables. */ From 0e192b99d7d09f08b445c31ee7c7f3d0bfb27345 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Tue, 13 May 2008 20:55:40 +0400 Subject: [PATCH 099/821] x86: head_64.S cleanup - use PMD_SHIFT instead of numeric constant Signed-off-by: Cyrill Gorcunov Signed-off-by: Ingo Molnar --- arch/x86/kernel/head_64.S | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 7475b4c91f05..d8ed3259e6e4 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -322,11 +322,11 @@ early_idt_ripmsg: ENTRY(name) /* Automate the creation of 1 to 1 mapping pmd entries */ -#define PMDS(START, PERM, COUNT) \ - i = 0 ; \ - .rept (COUNT) ; \ - .quad (START) + (i << 21) + (PERM) ; \ - i = i + 1 ; \ +#define PMDS(START, PERM, COUNT) \ + i = 0 ; \ + .rept (COUNT) ; \ + .quad (START) + (i << PMD_SHIFT) + (PERM) ; \ + i = i + 1 ; \ .endr /* From 23eb271b9186531e1eb704dda9ab37abcfd0ca4a Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 14 May 2008 16:10:39 -0700 Subject: [PATCH 100/821] x86: setup_force_cpu_cap(): don't do clear_bit(non-unsigned-long) Another hack to make proper prototyping of x86 bitops viable. Cc: Andrea Arcangeli Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- include/asm-x86/cpufeature.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h index 0d609c837a41..78b47e7404eb 100644 --- a/include/asm-x86/cpufeature.h +++ b/include/asm-x86/cpufeature.h @@ -142,11 +142,11 @@ extern const char * const x86_power_flags[32]; #define clear_cpu_cap(c, bit) clear_bit(bit, (unsigned long *)((c)->x86_capability)) #define setup_clear_cpu_cap(bit) do { \ clear_cpu_cap(&boot_cpu_data, bit); \ - set_bit(bit, cleared_cpu_caps); \ + set_bit(bit, (unsigned long *)cleared_cpu_caps); \ } while (0) #define setup_force_cpu_cap(bit) do { \ set_cpu_cap(&boot_cpu_data, bit); \ - clear_bit(bit, cleared_cpu_caps); \ + clear_bit(bit, (unsigned long *)cleared_cpu_caps); \ } while (0) #define cpu_has_fpu boot_cpu_has(X86_FEATURE_FPU) From bfe4bb1526945e446d2912bef2e1e2cbd2c7349e Mon Sep 17 00:00:00 2001 From: Miklos Vajna Date: Sat, 17 May 2008 22:48:13 +0200 Subject: [PATCH 101/821] x86: janitor work in bugs.c Just moved trailing statements to the next line, removed space before open/close parenthesis, wrapped long lines. Signed-off-by: Miklos Vajna Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/bugs.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index 170d2f5523b2..1b1c56bb338f 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -59,8 +59,12 @@ static void __init check_fpu(void) return; } -/* trap_init() enabled FXSR and company _before_ testing for FP problems here. */ - /* Test for the divl bug.. */ + /* + * trap_init() enabled FXSR and company _before_ testing for FP + * problems here. + * + * Test for the divl bug.. + */ __asm__("fninit\n\t" "fldl %1\n\t" "fdivl %2\n\t" @@ -108,10 +112,15 @@ static void __init check_popad(void) "movl $12345678,%%eax; movl $0,%%edi; pusha; popa; movl (%%edx,%%edi),%%ecx " : "=&a" (res) : "d" (inp) - : "ecx", "edi" ); - /* If this fails, it means that any user program may lock the CPU hard. Too bad. */ - if (res != 12345678) printk( "Buggy.\n" ); - else printk( "OK.\n" ); + : "ecx", "edi"); + /* + * If this fails, it means that any user program may lock the + * CPU hard. Too bad. + */ + if (res != 12345678) + printk("Buggy.\n"); + else + printk("OK.\n"); #endif } @@ -137,7 +146,8 @@ static void __init check_config(void) * i486+ only features! (WP works in supervisor mode and the * new "invlpg" and "bswap" instructions) */ -#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_BSWAP) +#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || \ + defined(CONFIG_X86_BSWAP) if (boot_cpu_data.x86 == 3) panic("Kernel requires i486+ for 'invlpg' and other features"); #endif @@ -170,6 +180,7 @@ void __init check_bugs(void) check_fpu(); check_hlt(); check_popad(); - init_utsname()->machine[1] = '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86); + init_utsname()->machine[1] = + '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86); alternative_instructions(); } From f0766440dda7ace8a43b030f75e2dcb82449fb85 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Fri, 9 May 2008 19:09:48 -0700 Subject: [PATCH 102/821] x86: unify current.h Simply stitch these together. There are just two definitions that are shared but the file is resonably small and putting these things together shows that further unifications requires a unification of the per cpu / pda handling between both arches. Signed-off-by: Christoph Lameter Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/current.h | 42 ++++++++++++++++++++++++++++++++---- include/asm-x86/current_32.h | 17 --------------- include/asm-x86/current_64.h | 27 ----------------------- 3 files changed, 38 insertions(+), 48 deletions(-) delete mode 100644 include/asm-x86/current_32.h delete mode 100644 include/asm-x86/current_64.h diff --git a/include/asm-x86/current.h b/include/asm-x86/current.h index d2526d3f7346..7515c19d4988 100644 --- a/include/asm-x86/current.h +++ b/include/asm-x86/current.h @@ -1,5 +1,39 @@ +#ifndef _X86_CURRENT_H +#define _X86_CURRENT_H + #ifdef CONFIG_X86_32 -# include "current_32.h" -#else -# include "current_64.h" -#endif +#include +#include + +struct task_struct; + +DECLARE_PER_CPU(struct task_struct *, current_task); +static __always_inline struct task_struct *get_current(void) +{ + return x86_read_percpu(current_task); +} + +#else /* X86_32 */ + +#ifndef __ASSEMBLY__ +#include + +struct task_struct; + +static __always_inline struct task_struct *get_current(void) +{ + return read_pda(pcurrent); +} + +#else /* __ASSEMBLY__ */ + +#include +#define GET_CURRENT(reg) movq %gs:(pda_pcurrent),reg + +#endif /* __ASSEMBLY__ */ + +#endif /* X86_32 */ + +#define current get_current() + +#endif /* X86_CURRENT_H */ diff --git a/include/asm-x86/current_32.h b/include/asm-x86/current_32.h deleted file mode 100644 index 5af9bdb97a16..000000000000 --- a/include/asm-x86/current_32.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef _I386_CURRENT_H -#define _I386_CURRENT_H - -#include -#include - -struct task_struct; - -DECLARE_PER_CPU(struct task_struct *, current_task); -static __always_inline struct task_struct *get_current(void) -{ - return x86_read_percpu(current_task); -} - -#define current get_current() - -#endif /* !(_I386_CURRENT_H) */ diff --git a/include/asm-x86/current_64.h b/include/asm-x86/current_64.h deleted file mode 100644 index 2d368ede2fc1..000000000000 --- a/include/asm-x86/current_64.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _X86_64_CURRENT_H -#define _X86_64_CURRENT_H - -#if !defined(__ASSEMBLY__) -struct task_struct; - -#include - -static inline struct task_struct *get_current(void) -{ - struct task_struct *t = read_pda(pcurrent); - return t; -} - -#define current get_current() - -#else - -#ifndef ASM_OFFSET_H -#include -#endif - -#define GET_CURRENT(reg) movq %gs:(pda_pcurrent),reg - -#endif - -#endif /* !(_X86_64_CURRENT_H) */ From 2141261a11524acbfce86a5a213bbaea08794bbb Mon Sep 17 00:00:00 2001 From: Miklos Vajna Date: Tue, 13 May 2008 13:35:25 +0200 Subject: [PATCH 103/821] x86: janitor work in video-vga.c Just moved an open brace to the previous line. Signed-off-by: Miklos Vajna Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/boot/video-vga.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c index 40ecb8d7688c..b939cb476dec 100644 --- a/arch/x86/boot/video-vga.c +++ b/arch/x86/boot/video-vga.c @@ -259,8 +259,7 @@ static int vga_probe(void) return mode_count[adapter]; } -__videocard video_vga = -{ +__videocard video_vga = { .card_name = "VGA", .probe = vga_probe, .set_mode = vga_set_mode, From 78d64fc21d2aa425c65de49765cddecc84d595a4 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 12 May 2008 15:44:39 +0200 Subject: [PATCH 104/821] x86: include/asm-x86/string_32.h - style only Looked at this file because of __memcpy warnings. Thought it could use a style/checkpatch cleanup. No change in vmlinux. [tglx: fixed the remaining issues ] Signed-off-by: Joe Perches Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/string_32.h | 316 +++++++++++++++++++++--------------- 1 file changed, 181 insertions(+), 135 deletions(-) diff --git a/include/asm-x86/string_32.h b/include/asm-x86/string_32.h index b49369ad9a61..8d0c593c4413 100644 --- a/include/asm-x86/string_32.h +++ b/include/asm-x86/string_32.h @@ -29,81 +29,116 @@ extern char *strchr(const char *s, int c); #define __HAVE_ARCH_STRLEN extern size_t strlen(const char *s); -static __always_inline void * __memcpy(void * to, const void * from, size_t n) +static __always_inline void *__memcpy(void *to, const void *from, size_t n) { -int d0, d1, d2; -__asm__ __volatile__( - "rep ; movsl\n\t" - "movl %4,%%ecx\n\t" - "andl $3,%%ecx\n\t" - "jz 1f\n\t" - "rep ; movsb\n\t" - "1:" - : "=&c" (d0), "=&D" (d1), "=&S" (d2) - : "0" (n/4), "g" (n), "1" ((long) to), "2" ((long) from) - : "memory"); -return (to); + int d0, d1, d2; + asm volatile("rep ; movsl\n\t" + "movl %4,%%ecx\n\t" + "andl $3,%%ecx\n\t" + "jz 1f\n\t" + "rep ; movsb\n\t" + "1:" + : "=&c" (d0), "=&D" (d1), "=&S" (d2) + : "0" (n / 4), "g" (n), "1" ((long)to), "2" ((long)from) + : "memory"); + return to; } /* * This looks ugly, but the compiler can optimize it totally, * as the count is constant. */ -static __always_inline void * __constant_memcpy(void * to, const void * from, size_t n) +static __always_inline void *__constant_memcpy(void *to, const void *from, + size_t n) { long esi, edi; - if (!n) return to; -#if 1 /* want to do small copies with non-string ops? */ + if (!n) + return to; + switch (n) { - case 1: *(char*)to = *(char*)from; return to; - case 2: *(short*)to = *(short*)from; return to; - case 4: *(int*)to = *(int*)from; return to; -#if 1 /* including those doable with two moves? */ - case 3: *(short*)to = *(short*)from; - *((char*)to+2) = *((char*)from+2); return to; - case 5: *(int*)to = *(int*)from; - *((char*)to+4) = *((char*)from+4); return to; - case 6: *(int*)to = *(int*)from; - *((short*)to+2) = *((short*)from+2); return to; - case 8: *(int*)to = *(int*)from; - *((int*)to+1) = *((int*)from+1); return to; -#endif + case 1: + *(char *)to = *(char *)from; + return to; + case 2: + *(short *)to = *(short *)from; + return to; + case 4: + *(int *)to = *(int *)from; + return to; + + case 3: + *(short *)to = *(short *)from; + *((char *)to + 2) = *((char *)from + 2); + return to; + case 5: + *(int *)to = *(int *)from; + *((char *)to + 4) = *((char *)from + 4); + return to; + case 6: + *(int *)to = *(int *)from; + *((short *)to + 2) = *((short *)from + 2); + return to; + case 8: + *(int *)to = *(int *)from; + *((int *)to + 1) = *((int *)from + 1); + return to; } -#endif - esi = (long) from; - edi = (long) to; - if (n >= 5*4) { + + esi = (long)from; + edi = (long)to; + if (n >= 5 * 4) { /* large block: use rep prefix */ int ecx; - __asm__ __volatile__( - "rep ; movsl" - : "=&c" (ecx), "=&D" (edi), "=&S" (esi) - : "0" (n/4), "1" (edi),"2" (esi) - : "memory" + asm volatile("rep ; movsl" + : "=&c" (ecx), "=&D" (edi), "=&S" (esi) + : "0" (n / 4), "1" (edi), "2" (esi) + : "memory" ); } else { /* small block: don't clobber ecx + smaller code */ - if (n >= 4*4) __asm__ __volatile__("movsl" - :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory"); - if (n >= 3*4) __asm__ __volatile__("movsl" - :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory"); - if (n >= 2*4) __asm__ __volatile__("movsl" - :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory"); - if (n >= 1*4) __asm__ __volatile__("movsl" - :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory"); + if (n >= 4 * 4) + asm volatile("movsl" + : "=&D"(edi), "=&S"(esi) + : "0"(edi), "1"(esi) + : "memory"); + if (n >= 3 * 4) + asm volatile("movsl" + : "=&D"(edi), "=&S"(esi) + : "0"(edi), "1"(esi) + : "memory"); + if (n >= 2 * 4) + asm volatile("movsl" + : "=&D"(edi), "=&S"(esi) + : "0"(edi), "1"(esi) + : "memory"); + if (n >= 1 * 4) + asm volatile("movsl" + : "=&D"(edi), "=&S"(esi) + : "0"(edi), "1"(esi) + : "memory"); } switch (n % 4) { /* tail */ - case 0: return to; - case 1: __asm__ __volatile__("movsb" - :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory"); - return to; - case 2: __asm__ __volatile__("movsw" - :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory"); - return to; - default: __asm__ __volatile__("movsw\n\tmovsb" - :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory"); - return to; + case 0: + return to; + case 1: + asm volatile("movsb" + : "=&D"(edi), "=&S"(esi) + : "0"(edi), "1"(esi) + : "memory"); + return to; + case 2: + asm volatile("movsw" + : "=&D"(edi), "=&S"(esi) + : "0"(edi), "1"(esi) + : "memory"); + return to; + default: + asm volatile("movsw\n\tmovsb" + : "=&D"(edi), "=&S"(esi) + : "0"(edi), "1"(esi) + : "memory"); + return to; } } @@ -117,87 +152,86 @@ static __always_inline void * __constant_memcpy(void * to, const void * from, si * This CPU favours 3DNow strongly (eg AMD Athlon) */ -static inline void * __constant_memcpy3d(void * to, const void * from, size_t len) +static inline void *__constant_memcpy3d(void *to, const void *from, size_t len) { if (len < 512) return __constant_memcpy(to, from, len); return _mmx_memcpy(to, from, len); } -static __inline__ void *__memcpy3d(void *to, const void *from, size_t len) +static inline void *__memcpy3d(void *to, const void *from, size_t len) { if (len < 512) return __memcpy(to, from, len); return _mmx_memcpy(to, from, len); } -#define memcpy(t, f, n) \ -(__builtin_constant_p(n) ? \ - __constant_memcpy3d((t),(f),(n)) : \ - __memcpy3d((t),(f),(n))) +#define memcpy(t, f, n) \ + (__builtin_constant_p((n)) \ + ? __constant_memcpy3d((t), (f), (n)) \ + : __memcpy3d((t), (f), (n))) #else /* * No 3D Now! */ - -#define memcpy(t, f, n) \ -(__builtin_constant_p(n) ? \ - __constant_memcpy((t),(f),(n)) : \ - __memcpy((t),(f),(n))) + +#define memcpy(t, f, n) \ + (__builtin_constant_p((n)) \ + ? __constant_memcpy((t), (f), (n)) \ + : __memcpy((t), (f), (n))) #endif #define __HAVE_ARCH_MEMMOVE -void *memmove(void * dest,const void * src, size_t n); +void *memmove(void *dest, const void *src, size_t n); #define memcmp __builtin_memcmp #define __HAVE_ARCH_MEMCHR -extern void *memchr(const void * cs,int c,size_t count); +extern void *memchr(const void *cs, int c, size_t count); -static inline void * __memset_generic(void * s, char c,size_t count) +static inline void *__memset_generic(void *s, char c, size_t count) { -int d0, d1; -__asm__ __volatile__( - "rep\n\t" - "stosb" - : "=&c" (d0), "=&D" (d1) - :"a" (c),"1" (s),"0" (count) - :"memory"); -return s; + int d0, d1; + asm volatile("rep\n\t" + "stosb" + : "=&c" (d0), "=&D" (d1) + : "a" (c), "1" (s), "0" (count) + : "memory"); + return s; } /* we might want to write optimized versions of these later */ -#define __constant_count_memset(s,c,count) __memset_generic((s),(c),(count)) +#define __constant_count_memset(s, c, count) __memset_generic((s), (c), (count)) /* - * memset(x,0,y) is a reasonably common thing to do, so we want to fill + * memset(x, 0, y) is a reasonably common thing to do, so we want to fill * things 32 bits at a time even when we don't know the size of the * area at compile-time.. */ -static __always_inline void * __constant_c_memset(void * s, unsigned long c, size_t count) +static __always_inline +void *__constant_c_memset(void *s, unsigned long c, size_t count) { -int d0, d1; -__asm__ __volatile__( - "rep ; stosl\n\t" - "testb $2,%b3\n\t" - "je 1f\n\t" - "stosw\n" - "1:\ttestb $1,%b3\n\t" - "je 2f\n\t" - "stosb\n" - "2:" - :"=&c" (d0), "=&D" (d1) - :"a" (c), "q" (count), "0" (count/4), "1" ((long) s) - :"memory"); -return (s); + int d0, d1; + asm volatile("rep ; stosl\n\t" + "testb $2,%b3\n\t" + "je 1f\n\t" + "stosw\n" + "1:\ttestb $1,%b3\n\t" + "je 2f\n\t" + "stosb\n" + "2:" + : "=&c" (d0), "=&D" (d1) + : "a" (c), "q" (count), "0" (count/4), "1" ((long)s) + : "memory"); + return s; } /* Added by Gertjan van Wingerde to make minix and sysv module work */ #define __HAVE_ARCH_STRNLEN -extern size_t strnlen(const char * s, size_t count); +extern size_t strnlen(const char *s, size_t count); /* end of additional stuff */ #define __HAVE_ARCH_STRSTR @@ -207,66 +241,78 @@ extern char *strstr(const char *cs, const char *ct); * This looks horribly ugly, but the compiler can optimize it totally, * as we by now know that both pattern and count is constant.. */ -static __always_inline void * __constant_c_and_count_memset(void * s, unsigned long pattern, size_t count) +static __always_inline +void *__constant_c_and_count_memset(void *s, unsigned long pattern, + size_t count) { switch (count) { + case 0: + return s; + case 1: + *(unsigned char *)s = pattern & 0xff; + return s; + case 2: + *(unsigned short *)s = pattern & 0xffff; + return s; + case 3: + *(unsigned short *)s = pattern & 0xffff; + *((unsigned char *)s + 2) = pattern & 0xff; + return s; + case 4: + *(unsigned long *)s = pattern; + return s; + } + +#define COMMON(x) \ + asm volatile("rep ; stosl" \ + x \ + : "=&c" (d0), "=&D" (d1) \ + : "a" (pattern), "0" (count/4), "1" ((long)s) \ + : "memory") + + { + int d0, d1; + switch (count % 4) { case 0: + COMMON(""); return s; case 1: - *(unsigned char *)s = pattern & 0xff; + COMMON("\n\tstosb"); return s; case 2: - *(unsigned short *)s = pattern & 0xffff; + COMMON("\n\tstosw"); return s; - case 3: - *(unsigned short *)s = pattern & 0xffff; - *(2+(unsigned char *)s) = pattern & 0xff; - return s; - case 4: - *(unsigned long *)s = pattern; + default: + COMMON("\n\tstosw\n\tstosb"); return s; + } } -#define COMMON(x) \ -__asm__ __volatile__( \ - "rep ; stosl" \ - x \ - : "=&c" (d0), "=&D" (d1) \ - : "a" (pattern),"0" (count/4),"1" ((long) s) \ - : "memory") -{ - int d0, d1; - switch (count % 4) { - case 0: COMMON(""); return s; - case 1: COMMON("\n\tstosb"); return s; - case 2: COMMON("\n\tstosw"); return s; - default: COMMON("\n\tstosw\n\tstosb"); return s; - } -} - + #undef COMMON } -#define __constant_c_x_memset(s, c, count) \ -(__builtin_constant_p(count) ? \ - __constant_c_and_count_memset((s),(c),(count)) : \ - __constant_c_memset((s),(c),(count))) +#define __constant_c_x_memset(s, c, count) \ + (__builtin_constant_p(count) \ + ? __constant_c_and_count_memset((s), (c), (count)) \ + : __constant_c_memset((s), (c), (count))) -#define __memset(s, c, count) \ -(__builtin_constant_p(count) ? \ - __constant_count_memset((s),(c),(count)) : \ - __memset_generic((s),(c),(count))) +#define __memset(s, c, count) \ + (__builtin_constant_p(count) \ + ? __constant_count_memset((s), (c), (count)) \ + : __memset_generic((s), (c), (count))) #define __HAVE_ARCH_MEMSET -#define memset(s, c, count) \ -(__builtin_constant_p(c) ? \ - __constant_c_x_memset((s),(0x01010101UL*(unsigned char)(c)),(count)) : \ - __memset((s),(c),(count))) +#define memset(s, c, count) \ + (__builtin_constant_p(c) \ + ? __constant_c_x_memset((s), (0x01010101UL * (unsigned char)(c)), \ + (count)) \ + : __memset((s), (c), (count))) /* * find the first occurrence of byte 'c', or 1 past the area if none */ #define __HAVE_ARCH_MEMSCAN -extern void *memscan(void * addr, int c, size_t size); +extern void *memscan(void *addr, int c, size_t size); #endif /* __KERNEL__ */ From 83cd1daa1dc3400e5ca2255818641233ebb30680 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 12 May 2008 15:44:39 +0200 Subject: [PATCH 105/821] x86: eliminate dead code in x86_64 entry.S Remove the not longer used handlers for reserved vectors. Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/entry_64.S | 4 ---- arch/x86/kernel/traps_64.c | 3 --- 2 files changed, 7 deletions(-) diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 556a8df522a7..1f1751dfb2f3 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -1120,10 +1120,6 @@ ENTRY(coprocessor_segment_overrun) zeroentry do_coprocessor_segment_overrun END(coprocessor_segment_overrun) -ENTRY(reserved) - zeroentry do_reserved -END(reserved) - /* runs on exception stack */ ENTRY(double_fault) XCPT_FRAME diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c index adff76ea97c4..ec6d3b2130c4 100644 --- a/arch/x86/kernel/traps_64.c +++ b/arch/x86/kernel/traps_64.c @@ -71,7 +71,6 @@ asmlinkage void general_protection(void); asmlinkage void page_fault(void); asmlinkage void coprocessor_error(void); asmlinkage void simd_coprocessor_error(void); -asmlinkage void reserved(void); asmlinkage void alignment_check(void); asmlinkage void machine_check(void); asmlinkage void spurious_interrupt_bug(void); @@ -702,12 +701,10 @@ DO_ERROR_INFO( 0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip) DO_ERROR( 4, SIGSEGV, "overflow", overflow) DO_ERROR( 5, SIGSEGV, "bounds", bounds) DO_ERROR_INFO( 6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip) -DO_ERROR( 7, SIGSEGV, "device not available", device_not_available) DO_ERROR( 9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun) DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS) DO_ERROR(11, SIGBUS, "segment not present", segment_not_present) DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0) -DO_ERROR(18, SIGSEGV, "reserved", reserved) /* Runs on IST stack */ asmlinkage void do_stack_segment(struct pt_regs *regs, long error_code) From 48e239572271cf79412d90753a721242a765f7d9 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 24 May 2008 17:24:34 +0200 Subject: [PATCH 106/821] x86: fixup the fallout of the bitops changes Signed-off-by: Thomas Gleixner --- arch/x86/mm/pgtable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c index 50159764f694..ee1d6d39edd4 100644 --- a/arch/x86/mm/pgtable.c +++ b/arch/x86/mm/pgtable.c @@ -255,7 +255,7 @@ int ptep_test_and_clear_young(struct vm_area_struct *vma, if (pte_young(*ptep)) ret = test_and_clear_bit(_PAGE_BIT_ACCESSED, - &ptep->pte); + (unsigned long *) &ptep->pte); if (ret) pte_update(vma->vm_mm, addr, ptep); From c9fea78dc9775981bed2da379568c8a8fddd1fb6 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 19 May 2008 13:53:39 +0200 Subject: [PATCH 107/821] x86: make NUMAQ depend on PCI NUMAQ depends on the existence of PCI hardware, and requiring PCI makes this subarch simpler and avoids build failures if PCI is disabled. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index bbafeac89116..029372813ae2 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -270,7 +270,7 @@ config X86_VOYAGER config X86_NUMAQ bool "NUMAQ (IBM/Sequent)" - depends on SMP && X86_32 + depends on SMP && X86_32 && PCI select NUMA help This option is used for getting Linux to run on a (IBM/Sequent) NUMA From 1ac97018169c5a13feaa90d9671f2d6ba2d9e86e Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 19 May 2008 14:10:14 +0200 Subject: [PATCH 108/821] x86: untangle pci dependencies make PCI-less subarches not build with PCI - instead of complicating the PCI dependencies. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 029372813ae2..78700f5faf62 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -258,7 +258,7 @@ config X86_ELAN config X86_VOYAGER bool "Voyager (NCR)" - depends on X86_32 && (SMP || BROKEN) + depends on X86_32 && (SMP || BROKEN) && !PCI help Voyager is an MCA-based 32-way capable SMP architecture proprietary to NCR Corp. Machine classes 345x/35xx/4100/51xx are Voyager-based. @@ -300,7 +300,7 @@ config X86_BIGSMP config X86_VISWS bool "SGI 320/540 (Visual Workstation)" - depends on X86_32 + depends on X86_32 && !PCI help The SGI Visual Workstation series is an IA32-based workstation based on SGI systems chips with some legacy PC hardware attached. @@ -344,7 +344,7 @@ config X86_RDC321X config X86_VSMP bool "Support for ScaleMP vSMP" select PARAVIRT - depends on X86_64 + depends on X86_64 && !PCI help Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is supposed to run on these EM64T-based machines. Only choose this option @@ -1477,8 +1477,7 @@ endmenu menu "Bus options (PCI etc.)" config PCI - bool "PCI support" if !X86_VISWS && !X86_VSMP - depends on !X86_VOYAGER + bool "PCI support" default y select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC) help From 0da72a4aeb4482c64c1142a2e36b556d13374937 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 30 Apr 2008 20:11:51 +0200 Subject: [PATCH 109/821] x86: fix sparse warning in mtrr/generic.c arch/x86/kernel/cpu/mtrr/generic.c:216:12: warning: symbol 'lo' shadows an earlier one Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mtrr/generic.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index 5d241ce94a44..0625d4158e58 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -213,12 +213,12 @@ void __init get_mtrr_state(void) mtrr_state.enabled = (lo & 0xc00) >> 10; if (amd_special_default_mtrr()) { - unsigned lo, hi; + unsigned low, high; /* TOP_MEM2 */ - rdmsr(MSR_K8_TOP_MEM2, lo, hi); - tom2 = hi; + rdmsr(MSR_K8_TOP_MEM2, low, high); + tom2 = high; tom2 <<= 32; - tom2 |= lo; + tom2 |= low; tom2 &= 0xffffff8000000ULL; } if (mtrr_show) { From 0dbfafa5fcd4dd189e2adc7b6ed9e0405e846d79 Mon Sep 17 00:00:00 2001 From: Alexander van Heukelum Date: Wed, 23 Apr 2008 15:09:05 +0200 Subject: [PATCH 110/821] x86: move i386 memory setup code to e820_32.c The x86_64 code has centralized the memory setup code in e820_64.c. This patch copies that approach to i386: - early_param("mem", ...) parsing is moved from setup_32.c to e820_32.c. - setup_memory_map() and finish_e820_parsing() are factored out from setup_arch(), and declarations are added to e820_32.h. - print_memory_map() is made static and removed from e820_32.h. - user_defined_memmap is marked as __initdata. Signed-off-by: Alexander van Heukelum Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/e820_32.c | 60 ++++++++++++++++++++++++++++++++++++-- arch/x86/kernel/setup_32.c | 50 ++----------------------------- include/asm-x86/e820_32.h | 4 ++- 3 files changed, 63 insertions(+), 51 deletions(-) diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c index ed733e7cf4e6..31ea2bb8c91a 100644 --- a/arch/x86/kernel/e820_32.c +++ b/arch/x86/kernel/e820_32.c @@ -30,7 +30,6 @@ unsigned long pci_mem_start = 0x10000000; #ifdef CONFIG_PCI EXPORT_SYMBOL(pci_mem_start); #endif -extern int user_defined_memmap; static struct resource system_rom_resource = { .name = "System ROM", @@ -584,7 +583,7 @@ void __init e820_register_memory(void) pci_mem_start, gapstart, gapsize); } -void __init print_memory_map(char *who) +static void __init print_memory_map(char *who) { int i; @@ -692,6 +691,54 @@ e820_all_mapped(unsigned long s, unsigned long e, unsigned type) return 0; } +/* Overridden in paravirt.c if CONFIG_PARAVIRT */ +char * __init __attribute__((weak)) memory_setup(void) +{ + return machine_specific_memory_setup(); +} + +void __init setup_memory_map(void) +{ + printk(KERN_INFO "BIOS-provided physical RAM map:\n"); + print_memory_map(memory_setup()); +} + +static int __initdata user_defined_memmap; + +/* + * "mem=nopentium" disables the 4MB page tables. + * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM + * to , overriding the bios size. + * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from + * to +, overriding the bios size. + * + * HPA tells me bootloaders need to parse mem=, so no new + * option should be mem= [also see Documentation/i386/boot.txt] + */ +static int __init parse_mem(char *arg) +{ + if (!arg) + return -EINVAL; + + if (strcmp(arg, "nopentium") == 0) { + setup_clear_cpu_cap(X86_FEATURE_PSE); + } else { + /* If the user specifies memory size, we + * limit the BIOS-provided memory map to + * that size. exactmap can be used to specify + * the exact map. mem=number can be used to + * trim the existing memory map. + */ + unsigned long long mem_size; + + mem_size = memparse(arg, &arg); + limit_regions(mem_size); + user_defined_memmap = 1; + } + return 0; +} +early_param("mem", parse_mem); + static int __init parse_memmap(char *arg) { if (!arg) @@ -762,6 +809,15 @@ void __init update_memory_range(u64 start, u64 size, unsigned old_type, new_type); } } + +void __init finish_e820_parsing(void) +{ + if (user_defined_memmap) { + printk(KERN_INFO "user-defined physical RAM map:\n"); + print_memory_map("user"); + } +} + void __init update_e820(void) { u8 nr_map; diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 2c5f8b213e86..b54c79c91efd 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -237,42 +237,6 @@ static inline void copy_edd(void) } #endif -int __initdata user_defined_memmap; - -/* - * "mem=nopentium" disables the 4MB page tables. - * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM - * to , overriding the bios size. - * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from - * to +, overriding the bios size. - * - * HPA tells me bootloaders need to parse mem=, so no new - * option should be mem= [also see Documentation/i386/boot.txt] - */ -static int __init parse_mem(char *arg) -{ - if (!arg) - return -EINVAL; - - if (strcmp(arg, "nopentium") == 0) { - setup_clear_cpu_cap(X86_FEATURE_PSE); - } else { - /* If the user specifies memory size, we - * limit the BIOS-provided memory map to - * that size. exactmap can be used to specify - * the exact map. mem=number can be used to - * trim the existing memory map. - */ - unsigned long long mem_size; - - mem_size = memparse(arg, &arg); - limit_regions(mem_size); - user_defined_memmap = 1; - } - return 0; -} -early_param("mem", parse_mem); - #ifdef CONFIG_PROC_VMCORE /* elfcorehdr= specifies the location of elf core header * stored by the crashed kernel. @@ -725,12 +689,6 @@ static void set_mca_bus(int x) static void set_mca_bus(int x) { } #endif -/* Overridden in paravirt.c if CONFIG_PARAVIRT */ -char * __init __attribute__((weak)) memory_setup(void) -{ - return machine_specific_memory_setup(); -} - #ifdef CONFIG_NUMA /* * In the golden day, when everything among i386 and x86_64 will be @@ -786,8 +744,7 @@ void __init setup_arch(char **cmdline_p) #endif ARCH_SETUP - printk(KERN_INFO "BIOS-provided physical RAM map:\n"); - print_memory_map(memory_setup()); + setup_memory_map(); copy_edd(); @@ -807,10 +764,7 @@ void __init setup_arch(char **cmdline_p) parse_early_param(); - if (user_defined_memmap) { - printk(KERN_INFO "user-defined physical RAM map:\n"); - print_memory_map("user"); - } + finish_e820_parsing(); strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); *cmdline_p = command_line; diff --git a/include/asm-x86/e820_32.h b/include/asm-x86/e820_32.h index a9f7c6ec32bf..e1f10c60901f 100644 --- a/include/asm-x86/e820_32.h +++ b/include/asm-x86/e820_32.h @@ -18,6 +18,9 @@ #ifndef __ASSEMBLY__ +extern void setup_memory_map(void); +extern void finish_e820_parsing(void); + extern struct e820map e820; extern void update_e820(void); @@ -32,7 +35,6 @@ extern void update_memory_range(u64 start, u64 size, unsigned old_type, unsigned new_type); extern void e820_register_memory(void); extern void limit_regions(unsigned long long size); -extern void print_memory_map(char *who); extern void init_iomem_resources(struct resource *code_resource, struct resource *data_resource, struct resource *bss_resource); From 95ffa2438d0e9c48779f0106b1c0eb36165e759c Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 29 Apr 2008 03:52:33 -0700 Subject: [PATCH 111/821] x86: mtrr cleanup for converting continuous to discrete layout, v8 some BIOS like to use continus MTRR layout, and X driver can not add WB entries for graphical cards when 4g or more RAM installed. the patch will change MTRR to discrete. mtrr_chunk_size= could be used to have smaller continuous block to hold holes. default is 256m, could be set according to size of graphics card memory. mtrr_gran_size= could be used to send smallest mtrr block to avoid run out of MTRRs v2: fix -1 for UC checking v3: default to disable, and need use enable_mtrr_cleanup to enable this feature skip the var state change warning. remove next_basek in range_to_mtrr() v4: correct warning mask. v5: CONFIG_MTRR_SANITIZER v6: fix 1g, 2g, 512 aligment with extra hole v7: gran_sizek to prevent running out of MTRRs. v8: fix hole_basek caculation caused when removing next_basek gran_sizek using when basek is 0. need to apply [PATCH] x86: fix trimming e820 with MTRR holes. right after this one. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- Documentation/kernel-parameters.txt | 14 + arch/x86/Kconfig | 26 ++ arch/x86/kernel/cpu/mtrr/generic.c | 32 +- arch/x86/kernel/cpu/mtrr/main.c | 467 +++++++++++++++++++++++++++- arch/x86/kernel/cpu/mtrr/mtrr.h | 3 + 5 files changed, 528 insertions(+), 14 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index e07c432c731f..44427607b7c6 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -599,6 +599,20 @@ and is between 256 and 4096 characters. It is defined in the file See drivers/char/README.epca and Documentation/digiepca.txt. + disable_mtrr_cleanup [X86] + enable_mtrr_cleanup [X86] + The kernel tries to adjust MTRR layout from continuous + to discrete, to make X server driver able to add WB + entry later. This parameter enables/disables that. + + mtrr_chunk_size=nn[KMG] [X86] + used for mtrr cleanup. It is largest continous chunk + that could hold holes aka. UC entries. + + mtrr_gran_size=nn[KMG] [X86] + used for mtrr cleanup. It is granity of mtrr block. + Big value could prevent small alignment use up MTRRs. + disable_mtrr_trim [X86, Intel and AMD only] By default the kernel will trim any uncacheable memory out of your available memory pool based on diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index fe361ae7ef2f..97a1764a3d20 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1092,6 +1092,32 @@ config MTRR See for more information. +config MTRR_SANITIZER + def_bool y + prompt "MTRR cleanup support" + depends on MTRR + help + Convert MTRR layout from continuous to discrete, so some X driver + could add WB entries. + + Say N here if you see bootup problems (boot crash, boot hang, + spontaneous reboots). + + Could be disabled with disable_mtrr_cleanup. Also mtrr_chunk_size + could be used to send largest mtrr entry size for continuous block + to hold holes (aka. UC entries) + + If unsure, say Y. + +config MTRR_SANITIZER_ENABLE_DEFAULT + def_bool y + prompt "Enable MTRR cleanup by default" + depends on MTRR_SANITIZER + help + Enable mtrr cleanup by default + + If unsure, say Y. + config X86_PAT bool prompt "x86 PAT support" diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index 0625d4158e58..5aae648600bf 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -37,7 +37,7 @@ static struct fixed_range_block fixed_range_blocks[] = { static unsigned long smp_changes_mask; static struct mtrr_state mtrr_state = {}; static int mtrr_state_set; -static u64 tom2; +u64 mtrr_tom2; #undef MODULE_PARAM_PREFIX #define MODULE_PARAM_PREFIX "mtrr." @@ -139,8 +139,8 @@ u8 mtrr_type_lookup(u64 start, u64 end) } } - if (tom2) { - if (start >= (1ULL<<32) && (end < tom2)) + if (mtrr_tom2) { + if (start >= (1ULL<<32) && (end < mtrr_tom2)) return MTRR_TYPE_WRBACK; } @@ -158,6 +158,20 @@ get_mtrr_var_range(unsigned int index, struct mtrr_var_range *vr) rdmsr(MTRRphysMask_MSR(index), vr->mask_lo, vr->mask_hi); } +/* fill the MSR pair relating to a var range */ +void fill_mtrr_var_range(unsigned int index, + u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi) +{ + struct mtrr_var_range *vr; + + vr = mtrr_state.var_ranges; + + vr[index].base_lo = base_lo; + vr[index].base_hi = base_hi; + vr[index].mask_lo = mask_lo; + vr[index].mask_hi = mask_hi; +} + static void get_fixed_ranges(mtrr_type * frs) { @@ -216,10 +230,10 @@ void __init get_mtrr_state(void) unsigned low, high; /* TOP_MEM2 */ rdmsr(MSR_K8_TOP_MEM2, low, high); - tom2 = high; - tom2 <<= 32; - tom2 |= low; - tom2 &= 0xffffff8000000ULL; + mtrr_tom2 = high; + mtrr_tom2 <<= 32; + mtrr_tom2 |= low; + mtrr_tom2 &= 0xffffff8000000ULL; } if (mtrr_show) { int high_width; @@ -251,9 +265,9 @@ void __init get_mtrr_state(void) else printk(KERN_INFO "MTRR %u disabled\n", i); } - if (tom2) { + if (mtrr_tom2) { printk(KERN_INFO "TOM2: %016llx aka %lldM\n", - tom2, tom2>>20); + mtrr_tom2, mtrr_tom2>>20); } } mtrr_state_set = 1; diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 6a1e278d9323..8a6f68b45e3e 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include @@ -609,6 +610,452 @@ static struct sysdev_driver mtrr_sysdev_driver = { .resume = mtrr_restore, }; +#ifdef CONFIG_MTRR_SANITIZER + +#ifdef CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT +static int enable_mtrr_cleanup __initdata = 1; +#else +static int enable_mtrr_cleanup __initdata; +#endif + +#else + +static int enable_mtrr_cleanup __initdata = -1; + +#endif + +static int __init disable_mtrr_cleanup_setup(char *str) +{ + if (enable_mtrr_cleanup != -1) + enable_mtrr_cleanup = 0; + return 0; +} +early_param("disable_mtrr_cleanup", disable_mtrr_cleanup_setup); + +static int __init enable_mtrr_cleanup_setup(char *str) +{ + if (enable_mtrr_cleanup != -1) + enable_mtrr_cleanup = 1; + return 0; +} +early_param("enble_mtrr_cleanup", enable_mtrr_cleanup_setup); + +#define RANGE_NUM 256 + +struct res_range { + unsigned long start; + unsigned long end; +}; + +static int __init add_range(struct res_range *range, int nr_range, unsigned long start, + unsigned long end, int merge) +{ + int i; + + if (!merge) + goto addit; + + /* try to merge it with old one */ + for (i = 0; i < nr_range; i++) { + unsigned long final_start, final_end; + unsigned long common_start, common_end; + + if (!range[i].end) + continue; + + common_start = max(range[i].start, start); + common_end = min(range[i].end, end); + if (common_start > common_end + 1) + continue; + + final_start = min(range[i].start, start); + final_end = max(range[i].end, end); + + range[i].start = final_start; + range[i].end = final_end; + return nr_range; + } + +addit: + /* need to add that */ + if (nr_range >= RANGE_NUM) + return nr_range; + + range[nr_range].start = start; + range[nr_range].end = end; + + nr_range++; + + return nr_range; + +} +static void __init subtract_range(struct res_range *range, unsigned long start, + unsigned long end) +{ + int i; + int j; + + for (j = 0; j < RANGE_NUM; j++) { + if (!range[j].end) + continue; + + if (start <= range[j].start && end >= range[j].end) { + range[j].start = 0; + range[j].end = 0; + continue; + } + + if (start <= range[j].start && end < range[j].end && range[j].start < end + 1) { + range[j].start = end + 1; + continue; + } + + + if (start > range[j].start && end >= range[j].end && range[j].end > start - 1) { + range[j].end = start - 1; + continue; + } + + if (start > range[j].start && end < range[j].end) { + /* find the new spare */ + for (i = 0; i < RANGE_NUM; i++) { + if (range[i].end == 0) + break; + } + if (i < RANGE_NUM) { + range[i].end = range[j].end; + range[i].start = end + 1; + } else { + printk(KERN_ERR "run of slot in ranges\n"); + } + range[j].end = start - 1; + continue; + } + } +} + +static int __init cmp_range(const void *x1, const void *x2) +{ + const struct res_range *r1 = x1; + const struct res_range *r2 = x2; + long start1, start2; + + start1 = r1->start; + start2 = r2->start; + + return start1 - start2; +} + +struct var_mtrr_state { + unsigned long range_startk, range_sizek; + unsigned long chunk_sizek; + unsigned long gran_sizek; + unsigned int reg; + unsigned address_bits; +}; + +static void __init set_var_mtrr( + unsigned int reg, unsigned long basek, unsigned long sizek, + unsigned char type, unsigned address_bits) +{ + u32 base_lo, base_hi, mask_lo, mask_hi; + unsigned address_mask_high; + + if (!sizek) { + fill_mtrr_var_range(reg, 0, 0, 0, 0); + return; + } + + address_mask_high = ((1u << (address_bits - 32u)) - 1u); + + base_hi = basek >> 22; + base_lo = basek << 10; + + if (sizek < 4*1024*1024) { + mask_hi = address_mask_high; + mask_lo = ~((sizek << 10) - 1); + } else { + mask_hi = address_mask_high & (~((sizek >> 22) - 1)); + mask_lo = 0; + } + + base_lo |= type; + mask_lo |= 0x800; + fill_mtrr_var_range(reg, base_lo, base_hi, mask_lo, mask_hi); +} + +static unsigned int __init range_to_mtrr(unsigned int reg, + unsigned long range_startk, unsigned long range_sizek, + unsigned char type, unsigned address_bits) +{ + if (!range_sizek || (reg >= num_var_ranges)) + return reg; + + while (range_sizek) { + unsigned long max_align, align; + unsigned long sizek; + /* Compute the maximum size I can make a range */ + if (range_startk) + max_align = ffs(range_startk) - 1; + else + max_align = 32; + align = fls(range_sizek) - 1; + if (align > max_align) + align = max_align; + + sizek = 1 << align; + printk(KERN_INFO "Setting variable MTRR %d, base: %ldMB, range: %ldMB, type %s\n", + reg, range_startk >> 10, sizek >> 10, + (type == MTRR_TYPE_UNCACHABLE)?"UC": + ((type == MTRR_TYPE_WRBACK)?"WB":"Other") + ); + set_var_mtrr(reg++, range_startk, sizek, type, address_bits); + range_startk += sizek; + range_sizek -= sizek; + if (reg >= num_var_ranges) + break; + } + return reg; +} + +static void __init range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek) +{ + unsigned long hole_basek, hole_sizek; + unsigned long range0_basek, range0_sizek; + unsigned long range_basek, range_sizek; + unsigned long chunk_sizek; + unsigned long gran_sizek; + + hole_basek = 0; + hole_sizek = 0; + chunk_sizek = state->chunk_sizek; + gran_sizek = state->gran_sizek; + + /* align with gran size, prevent small block used up MTRRs */ + range_basek = ALIGN(state->range_startk, gran_sizek); + if ((range_basek > basek) && basek) + return; + range_sizek = ALIGN(state->range_sizek - (range_basek - state->range_startk), gran_sizek); + + while (range_basek + range_sizek > (state->range_startk + state->range_sizek)) { + range_sizek -= gran_sizek; + if (!range_sizek) + return; + } + state->range_startk = range_basek; + state->range_sizek = range_sizek; + + /* try to append some small hole */ + range0_basek = state->range_startk; + range0_sizek = ALIGN(state->range_sizek, chunk_sizek); + if ((range0_sizek == state->range_sizek) || + ((range0_basek + range0_sizek - chunk_sizek > basek) && basek)) { + printk(KERN_INFO "rangeX: %016lx - %016lx\n", range0_basek<<10, (range0_basek + state->range_sizek)<<10); + state->reg = range_to_mtrr(state->reg, range0_basek, + state->range_sizek, MTRR_TYPE_WRBACK, state->address_bits); + return; + } + + + range0_sizek -= chunk_sizek; + printk(KERN_INFO "range0: %016lx - %016lx\n", range0_basek<<10, (range0_basek + range0_sizek)<<10); + state->reg = range_to_mtrr(state->reg, range0_basek, + range0_sizek, MTRR_TYPE_WRBACK, state->address_bits); + + range_basek = range0_basek + range0_sizek; + range_sizek = chunk_sizek; + if (range_sizek - (state->range_sizek - range0_sizek) < (chunk_sizek >> 1)) { + hole_sizek = range_sizek - (state->range_sizek - range0_sizek); + hole_basek = range_basek + range_sizek - hole_sizek; + } else + range_sizek = state->range_sizek - range0_sizek; + + printk(KERN_INFO "range: %016lx - %016lx\n", range_basek<<10, (range_basek + range_sizek)<<10); + state->reg = range_to_mtrr(state->reg, range_basek, + range_sizek, MTRR_TYPE_WRBACK, state->address_bits); + if (hole_sizek) { + printk(KERN_INFO "hole: %016lx - %016lx\n", hole_basek<<10, (hole_basek + hole_sizek)<<10); + state->reg = range_to_mtrr(state->reg, hole_basek, + hole_sizek, MTRR_TYPE_UNCACHABLE, state->address_bits); + } +} + +static void __init set_var_mtrr_range(struct var_mtrr_state *state, unsigned long base_pfn, unsigned long size_pfn) +{ + unsigned long basek, sizek; + + if (state->reg >= num_var_ranges) + return; + + basek = base_pfn << (PAGE_SHIFT - 10); + sizek = size_pfn << (PAGE_SHIFT - 10); + + /* See if I can merge with the last range */ + if ((basek <= 1024) || (state->range_startk + state->range_sizek == basek)) { + unsigned long endk = basek + sizek; + state->range_sizek = endk - state->range_startk; + return; + } + /* Write the range mtrrs */ + if (state->range_sizek != 0) { + range_to_mtrr_with_hole(state, basek); + + state->range_startk = 0; + state->range_sizek = 0; + } + /* Allocate an msr */ + state->range_startk = basek; + state->range_sizek = sizek; +} + +/* mininum size of mtrr block that can take hole */ +static u64 mtrr_chunk_size __initdata = (256ULL<<20); + +static int __init parse_mtrr_chunk_size_opt(char *p) +{ + if (!p) + return -EINVAL; + mtrr_chunk_size = memparse(p, &p); + return 0; +} +early_param("mtrr_chunk_size", parse_mtrr_chunk_size_opt); + +/* granity of mtrr of block */ +static u64 mtrr_gran_size __initdata = (64ULL<<20); + +static int __init parse_mtrr_gran_size_opt(char *p) +{ + if (!p) + return -EINVAL; + mtrr_gran_size = memparse(p, &p); + return 0; +} +early_param("mtrr_gran_size", parse_mtrr_gran_size_opt); + +static void __init x86_setup_var_mtrrs(struct res_range *range, int nr_range, unsigned address_bits) +{ + struct var_mtrr_state var_state; + int i; + + var_state.range_startk = 0; + var_state.range_sizek = 0; + var_state.reg = 0; + var_state.address_bits = address_bits; + var_state.chunk_sizek = mtrr_chunk_size >> 10; + var_state.gran_sizek = mtrr_gran_size >> 10; + + /* Write the range etc */ + for (i = 0; i < nr_range; i++) + set_var_mtrr_range(&var_state, range[i].start, range[i].end - range[i].start + 1); + + /* Write the last range */ + range_to_mtrr_with_hole(&var_state, 0); + printk(KERN_INFO "DONE variable MTRRs\n"); + /* Clear out the extra MTRR's */ + while (var_state.reg < num_var_ranges) + set_var_mtrr(var_state.reg++, 0, 0, 0, var_state.address_bits); +} + +static int __init x86_get_mtrr_mem_range(struct res_range *range, int nr_range, unsigned long extra_remove_base, unsigned long extra_remove_size) +{ + unsigned long i, base, size; + mtrr_type type; + + for (i = 0; i < num_var_ranges; i++) { + mtrr_if->get(i, &base, &size, &type); + if (type != MTRR_TYPE_WRBACK) + continue; + nr_range = add_range(range, nr_range, base, base + size - 1, 1); + } + printk(KERN_INFO "After WB checking\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_INFO "MTRR MAP PFN: %016lx - %016lx\n", range[i].start, range[i].end + 1); + + /* take out UC ranges */ + for (i = 0; i < num_var_ranges; i++) { + mtrr_if->get(i, &base, &size, &type); + if (type != MTRR_TYPE_UNCACHABLE) + continue; + if (!size) + continue; + subtract_range(range, base, base + size - 1); + } + if (extra_remove_size) + subtract_range(range, extra_remove_base, extra_remove_base + extra_remove_size - 1); + + /* get new range num */ + nr_range = 0; + for (i = 0; i < RANGE_NUM; i++) { + if (!range[i].end) + continue; + nr_range++; + } + printk(KERN_INFO "After UC checking\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_INFO "MTRR MAP PFN: %016lx - %016lx\n", range[i].start, range[i].end + 1); + + /* sort the ranges */ + sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL); + printk(KERN_INFO "After sorting\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_INFO "MTRR MAP PFN: %016lx - %016lx\n", range[i].start, range[i].end + 1); + + return nr_range; +} + +static int __init mtrr_cleanup(unsigned address_bits) +{ + unsigned long i, base, size, def, dummy; + mtrr_type type; + struct res_range range[RANGE_NUM]; + int nr_range; + unsigned long extra_remove_base, extra_remove_size; + + /* extra one for all 0 */ + int num[MTRR_NUM_TYPES + 1]; + + if (!is_cpu(INTEL) || enable_mtrr_cleanup < 1) + return 0; + rdmsr(MTRRdefType_MSR, def, dummy); + def &= 0xff; + if (def != MTRR_TYPE_UNCACHABLE) + return 0; + + /* check entries number */ + memset(num, 0, sizeof(num)); + for (i = 0; i < num_var_ranges; i++) { + mtrr_if->get(i, &base, &size, &type); + if (type >= MTRR_NUM_TYPES) + continue; + if (!size) + type = MTRR_NUM_TYPES; + num[type]++; + } + + /* check if we got UC entries */ + if (!num[MTRR_TYPE_UNCACHABLE]) + return 0; + + /* check if we only had WB and UC */ + if (num[MTRR_TYPE_WRBACK] + num[MTRR_TYPE_UNCACHABLE] != + num_var_ranges - num[MTRR_NUM_TYPES]) + return 0; + + memset(range, 0, sizeof(range)); + extra_remove_size = 0; + if (mtrr_tom2) { + extra_remove_base = 1 << (32 - PAGE_SHIFT); + extra_remove_size = (mtrr_tom2>>PAGE_SHIFT) - extra_remove_base; + } + nr_range = x86_get_mtrr_mem_range(range, 0, extra_remove_base, extra_remove_size); + + /* convert ranges to var ranges state */ + x86_setup_var_mtrrs(range, nr_range, address_bits); + + return 1; + +} + static int disable_mtrr_trim; static int __init disable_mtrr_trim_setup(char *str) @@ -729,18 +1176,21 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) */ void __init mtrr_bp_init(void) { + u32 phys_addr; init_ifs(); + phys_addr = 32; + if (cpu_has_mtrr) { mtrr_if = &generic_mtrr_ops; size_or_mask = 0xff000000; /* 36 bits */ size_and_mask = 0x00f00000; + phys_addr = 36; /* This is an AMD specific MSR, but we assume(hope?) that Intel will implement it to when they extend the address bus of the Xeon. */ if (cpuid_eax(0x80000000) >= 0x80000008) { - u32 phys_addr; phys_addr = cpuid_eax(0x80000008) & 0xff; /* CPUID workaround for Intel 0F33/0F34 CPU */ if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && @@ -758,6 +1208,7 @@ void __init mtrr_bp_init(void) don't support PAE */ size_or_mask = 0xfff00000; /* 32 bits */ size_and_mask = 0; + phys_addr = 32; } } else { switch (boot_cpu_data.x86_vendor) { @@ -791,8 +1242,13 @@ void __init mtrr_bp_init(void) if (mtrr_if) { set_num_var_ranges(); init_table(); - if (use_intel()) + if (use_intel()) { get_mtrr_state(); + + if (mtrr_cleanup(phys_addr)) + mtrr_if->set_all(); + + } } } @@ -829,9 +1285,10 @@ static int __init mtrr_init_finialize(void) { if (!mtrr_if) return 0; - if (use_intel()) - mtrr_state_warn(); - else { + if (use_intel()) { + if (enable_mtrr_cleanup < 1) + mtrr_state_warn(); + } else { /* The CPUs haven't MTRR and seem to not support SMP. They have * specific drivers, we use a tricky method to support * suspend/resume for them. diff --git a/arch/x86/kernel/cpu/mtrr/mtrr.h b/arch/x86/kernel/cpu/mtrr/mtrr.h index 2cc77eb6fea3..2dc4ec656b23 100644 --- a/arch/x86/kernel/cpu/mtrr/mtrr.h +++ b/arch/x86/kernel/cpu/mtrr/mtrr.h @@ -81,6 +81,8 @@ void set_mtrr_done(struct set_mtrr_context *ctxt); void set_mtrr_cache_disable(struct set_mtrr_context *ctxt); void set_mtrr_prepare_save(struct set_mtrr_context *ctxt); +void fill_mtrr_var_range(unsigned int index, + u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi); void get_mtrr_state(void); extern void set_mtrr_ops(struct mtrr_ops * ops); @@ -92,6 +94,7 @@ extern struct mtrr_ops * mtrr_if; #define use_intel() (mtrr_if && mtrr_if->use_intel_if == 1) extern unsigned int num_var_ranges; +extern u64 mtrr_tom2; void mtrr_state_warn(void); const char *mtrr_attrib_to_str(int x); From 42651f15824d003e8357693ab72c4dbb3e280836 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 29 Apr 2008 01:59:49 -0700 Subject: [PATCH 112/821] x86: fix trimming e820 with MTRR holes. converting MTRR layout from continous to discrete, some time could run out of MTRRs. So add gran_sizek to prevent that by dumpping small RAM piece less than gran_sizek. previous trimming only can handle highest_pfn from mtrr to end_pfn from e820. when have more than 4g RAM installed, there will be holes below 4g. so need to check ram below 4g is coverred well. need to be applied after [PATCH] x86: mtrr cleanup for converting continuous to discrete layout v7 Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/mtrr/main.c | 101 ++++++++++++++++++++++++++------ arch/x86/kernel/e820_32.c | 7 ++- arch/x86/kernel/e820_64.c | 6 +- include/asm-x86/e820_32.h | 2 +- include/asm-x86/e820_64.h | 2 +- 5 files changed, 97 insertions(+), 21 deletions(-) diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 8a6f68b45e3e..9ab5c16b0d52 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -1095,6 +1095,17 @@ int __init amd_special_default_mtrr(void) return 0; } +static u64 __init real_trim_memory(unsigned long start_pfn, unsigned long limit_pfn) +{ + u64 trim_start, trim_size; + trim_start = start_pfn; + trim_start <<= PAGE_SHIFT; + trim_size = limit_pfn; + trim_size <<= PAGE_SHIFT; + trim_size -= trim_start; + return update_memory_range(trim_start, trim_size, E820_RAM, + E820_RESERVED); +} /** * mtrr_trim_uncached_memory - trim RAM not covered by MTRRs * @end_pfn: ending page frame number @@ -1110,8 +1121,13 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) { unsigned long i, base, size, highest_pfn = 0, def, dummy; mtrr_type type; - u64 trim_start, trim_size; + struct res_range range[RANGE_NUM]; + int nr_range; + u64 total_real_trim_size; + int changed; + /* extra one for all 0 */ + int num[MTRR_NUM_TYPES + 1]; /* * Make sure we only trim uncachable memory on machines that * support the Intel MTRR architecture: @@ -1123,9 +1139,6 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) if (def != MTRR_TYPE_UNCACHABLE) return 0; - if (amd_special_default_mtrr()) - return 0; - /* Find highest cached pfn */ for (i = 0; i < num_var_ranges; i++) { mtrr_if->get(i, &base, &size, &type); @@ -1145,26 +1158,80 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) return 0; } - if (highest_pfn < end_pfn) { + /* check entries number */ + memset(num, 0, sizeof(num)); + for (i = 0; i < num_var_ranges; i++) { + mtrr_if->get(i, &base, &size, &type); + if (type >= MTRR_NUM_TYPES) + continue; + if (!size) + type = MTRR_NUM_TYPES; + num[type]++; + } + + /* no entry for WB? */ + if (!num[MTRR_TYPE_WRBACK]) + return 0; + + /* check if we only had WB and UC */ + if (num[MTRR_TYPE_WRBACK] + num[MTRR_TYPE_UNCACHABLE] != + num_var_ranges - num[MTRR_NUM_TYPES]) + return 0; + + memset(range, 0, sizeof(range)); + nr_range = 0; + if (mtrr_tom2) { + range[nr_range].start = (1ULL<<(32 - PAGE_SHIFT)); + range[nr_range].end = (mtrr_tom2 >> PAGE_SHIFT) - 1; + if (highest_pfn < range[nr_range].end + 1) + highest_pfn = range[nr_range].end + 1; + nr_range++; + } + nr_range = x86_get_mtrr_mem_range(range, nr_range, 0, 0); + + changed = 0; + total_real_trim_size = 0; + + /* check the top at first */ + i = nr_range - 1; + if (range[i].end + 1 < end_pfn) { + total_real_trim_size += real_trim_memory(range[i].end + 1, end_pfn); + } + + if (total_real_trim_size) { printk(KERN_WARNING "WARNING: BIOS bug: CPU MTRRs don't cover" - " all of memory, losing %luMB of RAM.\n", - (end_pfn - highest_pfn) >> (20 - PAGE_SHIFT)); + " all of memory, losing %lluMB of RAM.\n", + total_real_trim_size >> 20); WARN_ON(1); - printk(KERN_INFO "update e820 for mtrr\n"); - trim_start = highest_pfn; - trim_start <<= PAGE_SHIFT; - trim_size = end_pfn; - trim_size <<= PAGE_SHIFT; - trim_size -= trim_start; - update_memory_range(trim_start, trim_size, E820_RAM, - E820_RESERVED); + printk(KERN_INFO "update e820 for mtrr -- end_pfn\n"); update_e820(); - return 1; + changed = 1; } - return 0; + total_real_trim_size = 0; + if (range[0].start) + total_real_trim_size += real_trim_memory(0, range[0].start); + + for (i = 0; i < nr_range - 1; i--) { + if (range[i].end + 1 < range[i+1].start) + total_real_trim_size += real_trim_memory(range[i].end + 1, range[i+1].start); + } + + if (total_real_trim_size) { + printk(KERN_WARNING "WARNING: BIOS bug: CPU MTRRs don't cover" + " all of memory, losing %lluMB of RAM.\n", + total_real_trim_size >> 20); + + WARN_ON(1); + + printk(KERN_INFO "update e820 for mtrr -- holes\n"); + update_e820(); + changed = 1; + } + + return changed; } /** diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c index 31ea2bb8c91a..857f706273a8 100644 --- a/arch/x86/kernel/e820_32.c +++ b/arch/x86/kernel/e820_32.c @@ -783,10 +783,11 @@ static int __init parse_memmap(char *arg) return 0; } early_param("memmap", parse_memmap); -void __init update_memory_range(u64 start, u64 size, unsigned old_type, +u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, unsigned new_type) { int i; + u64 real_updated_size = 0; BUG_ON(old_type == new_type); @@ -798,6 +799,7 @@ void __init update_memory_range(u64 start, u64 size, unsigned old_type, /* totally covered? */ if (ei->addr >= start && ei->size <= size) { ei->type = new_type; + real_updated_size += ei->size; continue; } /* partially covered */ @@ -807,7 +809,10 @@ void __init update_memory_range(u64 start, u64 size, unsigned old_type, continue; add_memory_region(final_start, final_end - final_start, new_type); + real_updated_size += final_end - final_start; } + + return real_updated_size; } void __init finish_e820_parsing(void) diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 124480c0008d..848b2cd2d1dd 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -829,10 +829,11 @@ void __init finish_e820_parsing(void) } } -void __init update_memory_range(u64 start, u64 size, unsigned old_type, +u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, unsigned new_type) { int i; + u64 real_updated_size = 0; BUG_ON(old_type == new_type); @@ -844,6 +845,7 @@ void __init update_memory_range(u64 start, u64 size, unsigned old_type, /* totally covered? */ if (ei->addr >= start && ei->size <= size) { ei->type = new_type; + real_updated_size += ei->size; continue; } /* partially covered */ @@ -853,7 +855,9 @@ void __init update_memory_range(u64 start, u64 size, unsigned old_type, continue; add_memory_region(final_start, final_end - final_start, new_type); + real_updated_size += final_end - final_start; } + return real_updated_size; } void __init update_e820(void) diff --git a/include/asm-x86/e820_32.h b/include/asm-x86/e820_32.h index e1f10c60901f..af0711b220df 100644 --- a/include/asm-x86/e820_32.h +++ b/include/asm-x86/e820_32.h @@ -31,7 +31,7 @@ extern void propagate_e820_map(void); extern void register_bootmem_low_pages(unsigned long max_low_pfn); extern void add_memory_region(unsigned long long start, unsigned long long size, int type); -extern void update_memory_range(u64 start, u64 size, unsigned old_type, +extern u64 update_memory_range(u64 start, u64 size, unsigned old_type, unsigned new_type); extern void e820_register_memory(void); extern void limit_regions(unsigned long long size); diff --git a/include/asm-x86/e820_64.h b/include/asm-x86/e820_64.h index 71c4d685d30d..6ae3e2803286 100644 --- a/include/asm-x86/e820_64.h +++ b/include/asm-x86/e820_64.h @@ -21,7 +21,7 @@ extern unsigned long find_e820_area_size(unsigned long start, unsigned long align); extern void add_memory_region(unsigned long start, unsigned long size, int type); -extern void update_memory_range(u64 start, u64 size, unsigned old_type, +extern u64 update_memory_range(u64 start, u64 size, unsigned old_type, unsigned new_type); extern void setup_memory_region(void); extern void contig_e820_setup(void); From 8a374026c265476b1acfc3c186a66d59ebdb2cda Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 29 Apr 2008 20:25:16 -0700 Subject: [PATCH 113/821] x86: fix trimming e820 with MTRR holes. - fix v2: process hole then end_pfn fix update_memory_range with whole cover comparing Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/mtrr/main.c | 44 +++++++++++---------------------- arch/x86/kernel/e820_32.c | 3 ++- arch/x86/kernel/e820_64.c | 3 ++- 3 files changed, 19 insertions(+), 31 deletions(-) diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 9ab5c16b0d52..5a2a4c146333 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -1098,11 +1098,12 @@ int __init amd_special_default_mtrr(void) static u64 __init real_trim_memory(unsigned long start_pfn, unsigned long limit_pfn) { u64 trim_start, trim_size; - trim_start = start_pfn; + trim_start = start_pfn; trim_start <<= PAGE_SHIFT; trim_size = limit_pfn; trim_size <<= PAGE_SHIFT; trim_size -= trim_start; + return update_memory_range(trim_start, trim_size, E820_RAM, E820_RESERVED); } @@ -1124,7 +1125,6 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) struct res_range range[RANGE_NUM]; int nr_range; u64 total_real_trim_size; - int changed; /* extra one for all 0 */ int num[MTRR_NUM_TYPES + 1]; @@ -1189,49 +1189,35 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) } nr_range = x86_get_mtrr_mem_range(range, nr_range, 0, 0); - changed = 0; - total_real_trim_size = 0; - - /* check the top at first */ - i = nr_range - 1; - if (range[i].end + 1 < end_pfn) { - total_real_trim_size += real_trim_memory(range[i].end + 1, end_pfn); - } - - if (total_real_trim_size) { - printk(KERN_WARNING "WARNING: BIOS bug: CPU MTRRs don't cover" - " all of memory, losing %lluMB of RAM.\n", - total_real_trim_size >> 20); - - WARN_ON(1); - - printk(KERN_INFO "update e820 for mtrr -- end_pfn\n"); - update_e820(); - changed = 1; - } - total_real_trim_size = 0; + /* check the head */ if (range[0].start) total_real_trim_size += real_trim_memory(0, range[0].start); - - for (i = 0; i < nr_range - 1; i--) { + /* check the holes */ + for (i = 0; i < nr_range - 1; i++) { if (range[i].end + 1 < range[i+1].start) total_real_trim_size += real_trim_memory(range[i].end + 1, range[i+1].start); } + /* check the top */ + i = nr_range - 1; + if (range[i].end + 1 < end_pfn) + total_real_trim_size += real_trim_memory(range[i].end + 1, end_pfn); if (total_real_trim_size) { printk(KERN_WARNING "WARNING: BIOS bug: CPU MTRRs don't cover" " all of memory, losing %lluMB of RAM.\n", total_real_trim_size >> 20); - WARN_ON(1); + if (enable_mtrr_cleanup < 1) + WARN_ON(1); - printk(KERN_INFO "update e820 for mtrr -- holes\n"); + printk(KERN_INFO "update e820 for mtrr\n"); update_e820(); - changed = 1; + + return 1; } - return changed; + return 0; } /** diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c index 857f706273a8..751d517d802c 100644 --- a/arch/x86/kernel/e820_32.c +++ b/arch/x86/kernel/e820_32.c @@ -797,7 +797,8 @@ u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, if (ei->type != old_type) continue; /* totally covered? */ - if (ei->addr >= start && ei->size <= size) { + if (ei->addr >= start && + (ei->addr + ei->size) <= (start + size)) { ei->type = new_type; real_updated_size += ei->size; continue; diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 848b2cd2d1dd..c45b4dea4055 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -843,7 +843,8 @@ u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, if (ei->type != old_type) continue; /* totally covered? */ - if (ei->addr >= start && ei->size <= size) { + if (ei->addr >= start && + (ei->addr + ei->size) <= (start + size)) { ei->type = new_type; real_updated_size += ei->size; continue; From f5098d62c1d1cede8ff23d01bbf50a421f110562 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 29 Apr 2008 20:25:58 -0700 Subject: [PATCH 114/821] x86: mtrr cleanup for converting continuous to discrete layout v8 - fix v9: address format change requests by Ingo more case handling in range_to_var_with_hole Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 9 +- arch/x86/kernel/cpu/mtrr/main.c | 168 +++++++++++++++++--------------- 2 files changed, 96 insertions(+), 81 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 97a1764a3d20..f417fe33d852 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1110,13 +1110,12 @@ config MTRR_SANITIZER If unsure, say Y. config MTRR_SANITIZER_ENABLE_DEFAULT - def_bool y - prompt "Enable MTRR cleanup by default" + int "MTRR cleanup enable value (0-1)" + range 0 1 + default "0" depends on MTRR_SANITIZER help - Enable mtrr cleanup by default - - If unsure, say Y. + Enable mtrr cleanup default value config X86_PAT bool diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 5a2a4c146333..79597d3c3431 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -611,17 +611,9 @@ static struct sysdev_driver mtrr_sysdev_driver = { }; #ifdef CONFIG_MTRR_SANITIZER - -#ifdef CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT -static int enable_mtrr_cleanup __initdata = 1; +static int enable_mtrr_cleanup __initdata = CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT; #else -static int enable_mtrr_cleanup __initdata; -#endif - -#else - static int enable_mtrr_cleanup __initdata = -1; - #endif static int __init disable_mtrr_cleanup_setup(char *str) @@ -640,6 +632,7 @@ static int __init enable_mtrr_cleanup_setup(char *str) } early_param("enble_mtrr_cleanup", enable_mtrr_cleanup_setup); +/* should be related to MTRR_VAR_RANGES nums */ #define RANGE_NUM 256 struct res_range { @@ -647,14 +640,28 @@ struct res_range { unsigned long end; }; -static int __init add_range(struct res_range *range, int nr_range, unsigned long start, - unsigned long end, int merge) +static int __init +add_range(struct res_range *range, int nr_range, unsigned long start, + unsigned long end) +{ + /* out of slots */ + if (nr_range >= RANGE_NUM) + return nr_range; + + range[nr_range].start = start; + range[nr_range].end = end; + + nr_range++; + + return nr_range; +} + +static int __init +add_range_with_merge(struct res_range *range, int nr_range, unsigned long start, + unsigned long end) { int i; - if (!merge) - goto addit; - /* try to merge it with old one */ for (i = 0; i < nr_range; i++) { unsigned long final_start, final_end; @@ -676,24 +683,14 @@ static int __init add_range(struct res_range *range, int nr_range, unsigned long return nr_range; } -addit: /* need to add that */ - if (nr_range >= RANGE_NUM) - return nr_range; - - range[nr_range].start = start; - range[nr_range].end = end; - - nr_range++; - - return nr_range; - + return add_range(range, nr_range, start, end); } -static void __init subtract_range(struct res_range *range, unsigned long start, - unsigned long end) + +static void __init +subtract_range(struct res_range *range, unsigned long start, unsigned long end) { - int i; - int j; + int i, j; for (j = 0; j < RANGE_NUM; j++) { if (!range[j].end) @@ -747,46 +744,47 @@ static int __init cmp_range(const void *x1, const void *x2) } struct var_mtrr_state { - unsigned long range_startk, range_sizek; - unsigned long chunk_sizek; - unsigned long gran_sizek; - unsigned int reg; - unsigned address_bits; + unsigned long range_startk; + unsigned long range_sizek; + unsigned long chunk_sizek; + unsigned long gran_sizek; + unsigned int reg; + unsigned int address_bits; }; -static void __init set_var_mtrr( - unsigned int reg, unsigned long basek, unsigned long sizek, - unsigned char type, unsigned address_bits) +static void __init +set_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek, + unsigned char type, unsigned address_bits) { u32 base_lo, base_hi, mask_lo, mask_hi; - unsigned address_mask_high; + u64 base, mask; if (!sizek) { fill_mtrr_var_range(reg, 0, 0, 0, 0); return; } - address_mask_high = ((1u << (address_bits - 32u)) - 1u); + mask = (1ULL << address_bits) - 1; + mask &= ~((((u64)sizek) << 10) - 1); - base_hi = basek >> 22; - base_lo = basek << 10; + base = ((u64)basek) << 10; - if (sizek < 4*1024*1024) { - mask_hi = address_mask_high; - mask_lo = ~((sizek << 10) - 1); - } else { - mask_hi = address_mask_high & (~((sizek >> 22) - 1)); - mask_lo = 0; - } + base |= type; + mask |= 0x800; + + base_lo = base & ((1ULL<<32) - 1); + base_hi = base >> 32; + + mask_lo = mask & ((1ULL<<32) - 1); + mask_hi = mask >> 32; - base_lo |= type; - mask_lo |= 0x800; fill_mtrr_var_range(reg, base_lo, base_hi, mask_lo, mask_hi); } -static unsigned int __init range_to_mtrr(unsigned int reg, - unsigned long range_startk, unsigned long range_sizek, - unsigned char type, unsigned address_bits) +static unsigned int __init +range_to_mtrr(unsigned int reg, unsigned long range_startk, + unsigned long range_sizek, unsigned char type, + unsigned address_bits) { if (!range_sizek || (reg >= num_var_ranges)) return reg; @@ -794,6 +792,7 @@ static unsigned int __init range_to_mtrr(unsigned int reg, while (range_sizek) { unsigned long max_align, align; unsigned long sizek; + /* Compute the maximum size I can make a range */ if (range_startk) max_align = ffs(range_startk) - 1; @@ -818,7 +817,8 @@ static unsigned int __init range_to_mtrr(unsigned int reg, return reg; } -static void __init range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek) +static void __init +range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek) { unsigned long hole_basek, hole_sizek; unsigned long range0_basek, range0_sizek; @@ -848,23 +848,31 @@ static void __init range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigne /* try to append some small hole */ range0_basek = state->range_startk; range0_sizek = ALIGN(state->range_sizek, chunk_sizek); - if ((range0_sizek == state->range_sizek) || - ((range0_basek + range0_sizek - chunk_sizek > basek) && basek)) { + if (range0_sizek == state->range_sizek) { printk(KERN_INFO "rangeX: %016lx - %016lx\n", range0_basek<<10, (range0_basek + state->range_sizek)<<10); state->reg = range_to_mtrr(state->reg, range0_basek, state->range_sizek, MTRR_TYPE_WRBACK, state->address_bits); return; + } else if (basek) { + while (range0_basek + range0_sizek - chunk_sizek > basek) { + range0_sizek -= chunk_sizek; + if (!range0_sizek) + break; + } } - range0_sizek -= chunk_sizek; + if (range0_sizek > chunk_sizek) + range0_sizek -= chunk_sizek; printk(KERN_INFO "range0: %016lx - %016lx\n", range0_basek<<10, (range0_basek + range0_sizek)<<10); state->reg = range_to_mtrr(state->reg, range0_basek, range0_sizek, MTRR_TYPE_WRBACK, state->address_bits); range_basek = range0_basek + range0_sizek; range_sizek = chunk_sizek; - if (range_sizek - (state->range_sizek - range0_sizek) < (chunk_sizek >> 1)) { + + if ((range_sizek - (state->range_sizek - range0_sizek) < (chunk_sizek >> 1)) && + (range_basek + range_sizek <= basek)) { hole_sizek = range_sizek - (state->range_sizek - range0_sizek); hole_basek = range_basek + range_sizek - hole_sizek; } else @@ -880,7 +888,9 @@ static void __init range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigne } } -static void __init set_var_mtrr_range(struct var_mtrr_state *state, unsigned long base_pfn, unsigned long size_pfn) +static void __init +set_var_mtrr_range(struct var_mtrr_state *state, unsigned long base_pfn, + unsigned long size_pfn) { unsigned long basek, sizek; @@ -921,7 +931,7 @@ static int __init parse_mtrr_chunk_size_opt(char *p) early_param("mtrr_chunk_size", parse_mtrr_chunk_size_opt); /* granity of mtrr of block */ -static u64 mtrr_gran_size __initdata = (64ULL<<20); +static u64 mtrr_gran_size __initdata = (1ULL<<20); static int __init parse_mtrr_gran_size_opt(char *p) { @@ -932,17 +942,19 @@ static int __init parse_mtrr_gran_size_opt(char *p) } early_param("mtrr_gran_size", parse_mtrr_gran_size_opt); -static void __init x86_setup_var_mtrrs(struct res_range *range, int nr_range, unsigned address_bits) +static void __init +x86_setup_var_mtrrs(struct res_range *range, int nr_range, + unsigned address_bits) { struct var_mtrr_state var_state; int i; - var_state.range_startk = 0; - var_state.range_sizek = 0; - var_state.reg = 0; - var_state.address_bits = address_bits; - var_state.chunk_sizek = mtrr_chunk_size >> 10; - var_state.gran_sizek = mtrr_gran_size >> 10; + var_state.range_startk = 0; + var_state.range_sizek = 0; + var_state.reg = 0; + var_state.address_bits = address_bits; + var_state.chunk_sizek = mtrr_chunk_size >> 10; + var_state.gran_sizek = mtrr_gran_size >> 10; /* Write the range etc */ for (i = 0; i < nr_range; i++) @@ -952,11 +964,16 @@ static void __init x86_setup_var_mtrrs(struct res_range *range, int nr_range, un range_to_mtrr_with_hole(&var_state, 0); printk(KERN_INFO "DONE variable MTRRs\n"); /* Clear out the extra MTRR's */ - while (var_state.reg < num_var_ranges) - set_var_mtrr(var_state.reg++, 0, 0, 0, var_state.address_bits); + while (var_state.reg < num_var_ranges) { + set_var_mtrr(var_state.reg, 0, 0, 0, var_state.address_bits); + var_state.reg++; + } } -static int __init x86_get_mtrr_mem_range(struct res_range *range, int nr_range, unsigned long extra_remove_base, unsigned long extra_remove_size) +static int __init +x86_get_mtrr_mem_range(struct res_range *range, int nr_range, + unsigned long extra_remove_base, + unsigned long extra_remove_size) { unsigned long i, base, size; mtrr_type type; @@ -965,7 +982,7 @@ static int __init x86_get_mtrr_mem_range(struct res_range *range, int nr_range, mtrr_if->get(i, &base, &size, &type); if (type != MTRR_TYPE_WRBACK) continue; - nr_range = add_range(range, nr_range, base, base + size - 1, 1); + nr_range = add_range_with_merge(range, nr_range, base, base + size - 1); } printk(KERN_INFO "After WB checking\n"); for (i = 0; i < nr_range; i++) @@ -1005,11 +1022,11 @@ static int __init x86_get_mtrr_mem_range(struct res_range *range, int nr_range, static int __init mtrr_cleanup(unsigned address_bits) { - unsigned long i, base, size, def, dummy; - mtrr_type type; - struct res_range range[RANGE_NUM]; - int nr_range; unsigned long extra_remove_base, extra_remove_size; + unsigned long i, base, size, def, dummy; + struct res_range range[RANGE_NUM]; + mtrr_type type; + int nr_range; /* extra one for all 0 */ int num[MTRR_NUM_TYPES + 1]; @@ -1053,7 +1070,6 @@ static int __init mtrr_cleanup(unsigned address_bits) x86_setup_var_mtrrs(range, nr_range, address_bits); return 1; - } static int disable_mtrr_trim; From 12031a624af7816ec7660b82be648aa3703b4ebe Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 2 May 2008 02:40:22 -0700 Subject: [PATCH 115/821] x86: mtrr cleanup for converting continuous to discrete - auto detect v4 Loop through mtrr chunk_size and gran_size from 1M to 2G to find out the optimal value so user does not need to add mtrr_chunk_size and mtrr_gran_size to the kernel command line. If optimal value is not found, print out all list to help select less optimal value. Add mtrr_spare_reg_nr= so user could set 2 instead of 1, if the card need more entries. v2: find the one with more spare entries v3: fix hole_basek offset v4: tight the compare between range and range_new loop stop with 4g Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Gabriel C Cc: Mika Fischer Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 13 +- arch/x86/Kconfig | 9 + arch/x86/kernel/cpu/mtrr/main.c | 616 +++++++++++++++++++++------- 3 files changed, 487 insertions(+), 151 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 44427607b7c6..2000977af776 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -610,8 +610,17 @@ and is between 256 and 4096 characters. It is defined in the file that could hold holes aka. UC entries. mtrr_gran_size=nn[KMG] [X86] - used for mtrr cleanup. It is granity of mtrr block. - Big value could prevent small alignment use up MTRRs. + Used for mtrr cleanup. It is granularity of mtrr block. + Default is 1. + Large value could prevent small alignment from + using up MTRRs. + + mtrr_spare_reg_nr=n [X86] + Format: + Range: 0,7 : spare reg number + Default : 1 + Used for mtrr cleanup. It is spare mtrr entries number. + Set to 2 or more if your graphical card needs more. disable_mtrr_trim [X86, Intel and AMD only] By default the kernel will trim any uncacheable diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index f417fe33d852..9e9761504422 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1117,6 +1117,15 @@ config MTRR_SANITIZER_ENABLE_DEFAULT help Enable mtrr cleanup default value +config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT + int "MTRR cleanup spare reg num (0-7)" + range 0 7 + default "1" + depends on MTRR_SANITIZER + help + mtrr cleanup spare entries default, it can be changed via + mtrr_spare_reg_nr= + config X86_PAT bool prompt "x86 PAT support" diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 79597d3c3431..e6c162c379ac 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -610,28 +610,6 @@ static struct sysdev_driver mtrr_sysdev_driver = { .resume = mtrr_restore, }; -#ifdef CONFIG_MTRR_SANITIZER -static int enable_mtrr_cleanup __initdata = CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT; -#else -static int enable_mtrr_cleanup __initdata = -1; -#endif - -static int __init disable_mtrr_cleanup_setup(char *str) -{ - if (enable_mtrr_cleanup != -1) - enable_mtrr_cleanup = 0; - return 0; -} -early_param("disable_mtrr_cleanup", disable_mtrr_cleanup_setup); - -static int __init enable_mtrr_cleanup_setup(char *str) -{ - if (enable_mtrr_cleanup != -1) - enable_mtrr_cleanup = 1; - return 0; -} -early_param("enble_mtrr_cleanup", enable_mtrr_cleanup_setup); - /* should be related to MTRR_VAR_RANGES nums */ #define RANGE_NUM 256 @@ -702,13 +680,15 @@ subtract_range(struct res_range *range, unsigned long start, unsigned long end) continue; } - if (start <= range[j].start && end < range[j].end && range[j].start < end + 1) { + if (start <= range[j].start && end < range[j].end && + range[j].start < end + 1) { range[j].start = end + 1; continue; } - if (start > range[j].start && end >= range[j].end && range[j].end > start - 1) { + if (start > range[j].start && end >= range[j].end && + range[j].end > start - 1) { range[j].end = start - 1; continue; } @@ -743,18 +723,123 @@ static int __init cmp_range(const void *x1, const void *x2) return start1 - start2; } +struct var_mtrr_range_state { + unsigned long base_pfn; + unsigned long size_pfn; + mtrr_type type; +}; + +struct var_mtrr_range_state __initdata range_state[RANGE_NUM]; + +static int __init +x86_get_mtrr_mem_range(struct res_range *range, int nr_range, + unsigned long extra_remove_base, + unsigned long extra_remove_size) +{ + unsigned long i, base, size; + mtrr_type type; + + for (i = 0; i < num_var_ranges; i++) { + type = range_state[i].type; + if (type != MTRR_TYPE_WRBACK) + continue; + base = range_state[i].base_pfn; + size = range_state[i].size_pfn; + nr_range = add_range_with_merge(range, nr_range, base, + base + size - 1); + } + printk(KERN_DEBUG "After WB checking\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", + range[i].start, range[i].end + 1); + + /* take out UC ranges */ + for (i = 0; i < num_var_ranges; i++) { + type = range_state[i].type; + if (type != MTRR_TYPE_UNCACHABLE) + continue; + size = range_state[i].size_pfn; + if (!size) + continue; + base = range_state[i].base_pfn; + subtract_range(range, base, base + size - 1); + } + if (extra_remove_size) + subtract_range(range, extra_remove_base, + extra_remove_base + extra_remove_size - 1); + + /* get new range num */ + nr_range = 0; + for (i = 0; i < RANGE_NUM; i++) { + if (!range[i].end) + continue; + nr_range++; + } + printk(KERN_DEBUG "After UC checking\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", + range[i].start, range[i].end + 1); + + /* sort the ranges */ + sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL); + printk(KERN_DEBUG "After sorting\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", + range[i].start, range[i].end + 1); + + /* clear those is not used */ + for (i = nr_range; i < RANGE_NUM; i++) + memset(&range[i], 0, sizeof(range[i])); + + return nr_range; +} + +static struct res_range __initdata range[RANGE_NUM]; + +#ifdef CONFIG_MTRR_SANITIZER + +static unsigned long __init sum_ranges(struct res_range *range, int nr_range) +{ + unsigned long sum; + int i; + + sum = 0; + for (i = 0; i < nr_range; i++) + sum += range[i].end + 1 - range[i].start; + + return sum; +} + +static int enable_mtrr_cleanup __initdata = + CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT; + +static int __init disable_mtrr_cleanup_setup(char *str) +{ + if (enable_mtrr_cleanup != -1) + enable_mtrr_cleanup = 0; + return 0; +} +early_param("disable_mtrr_cleanup", disable_mtrr_cleanup_setup); + +static int __init enable_mtrr_cleanup_setup(char *str) +{ + if (enable_mtrr_cleanup != -1) + enable_mtrr_cleanup = 1; + return 0; +} +early_param("enble_mtrr_cleanup", enable_mtrr_cleanup_setup); + struct var_mtrr_state { unsigned long range_startk; unsigned long range_sizek; unsigned long chunk_sizek; unsigned long gran_sizek; unsigned int reg; - unsigned int address_bits; }; static void __init set_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek, - unsigned char type, unsigned address_bits) + unsigned char type, unsigned int address_bits) { u32 base_lo, base_hi, mask_lo, mask_hi; u64 base, mask; @@ -781,10 +866,34 @@ set_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek, fill_mtrr_var_range(reg, base_lo, base_hi, mask_lo, mask_hi); } +static void __init +save_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek, + unsigned char type) +{ + range_state[reg].base_pfn = basek >> (PAGE_SHIFT - 10); + range_state[reg].size_pfn = sizek >> (PAGE_SHIFT - 10); + range_state[reg].type = type; +} + +static void __init +set_var_mtrr_all(unsigned int address_bits) +{ + unsigned long basek, sizek; + unsigned char type; + unsigned int reg; + + for (reg = 0; reg < num_var_ranges; reg++) { + basek = range_state[reg].base_pfn << (PAGE_SHIFT - 10); + sizek = range_state[reg].size_pfn << (PAGE_SHIFT - 10); + type = range_state[reg].type; + + set_var_mtrr(reg, basek, sizek, type, address_bits); + } +} + static unsigned int __init range_to_mtrr(unsigned int reg, unsigned long range_startk, - unsigned long range_sizek, unsigned char type, - unsigned address_bits) + unsigned long range_sizek, unsigned char type) { if (!range_sizek || (reg >= num_var_ranges)) return reg; @@ -803,12 +912,13 @@ range_to_mtrr(unsigned int reg, unsigned long range_startk, align = max_align; sizek = 1 << align; - printk(KERN_INFO "Setting variable MTRR %d, base: %ldMB, range: %ldMB, type %s\n", + printk(KERN_DEBUG "Setting variable MTRR %d, base: %ldMB, " + "range: %ldMB, type %s\n", reg, range_startk >> 10, sizek >> 10, (type == MTRR_TYPE_UNCACHABLE)?"UC": ((type == MTRR_TYPE_WRBACK)?"WB":"Other") ); - set_var_mtrr(reg++, range_startk, sizek, type, address_bits); + save_var_mtrr(reg++, range_startk, sizek, type); range_startk += sizek; range_sizek -= sizek; if (reg >= num_var_ranges) @@ -817,10 +927,12 @@ range_to_mtrr(unsigned int reg, unsigned long range_startk, return reg; } -static void __init -range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek) +static unsigned __init +range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek, + unsigned long sizek) { unsigned long hole_basek, hole_sizek; + unsigned long second_basek, second_sizek; unsigned long range0_basek, range0_sizek; unsigned long range_basek, range_sizek; unsigned long chunk_sizek; @@ -828,64 +940,95 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek) hole_basek = 0; hole_sizek = 0; + second_basek = 0; + second_sizek = 0; chunk_sizek = state->chunk_sizek; gran_sizek = state->gran_sizek; /* align with gran size, prevent small block used up MTRRs */ range_basek = ALIGN(state->range_startk, gran_sizek); if ((range_basek > basek) && basek) - return; - range_sizek = ALIGN(state->range_sizek - (range_basek - state->range_startk), gran_sizek); + return second_sizek; + state->range_sizek -= (range_basek - state->range_startk); + range_sizek = ALIGN(state->range_sizek, gran_sizek); - while (range_basek + range_sizek > (state->range_startk + state->range_sizek)) { + while (range_sizek > state->range_sizek) { range_sizek -= gran_sizek; if (!range_sizek) - return; + return 0; } - state->range_startk = range_basek; state->range_sizek = range_sizek; /* try to append some small hole */ range0_basek = state->range_startk; range0_sizek = ALIGN(state->range_sizek, chunk_sizek); if (range0_sizek == state->range_sizek) { - printk(KERN_INFO "rangeX: %016lx - %016lx\n", range0_basek<<10, (range0_basek + state->range_sizek)<<10); - state->reg = range_to_mtrr(state->reg, range0_basek, - state->range_sizek, MTRR_TYPE_WRBACK, state->address_bits); - return; - } else if (basek) { - while (range0_basek + range0_sizek - chunk_sizek > basek) { + printk(KERN_DEBUG "rangeX: %016lx - %016lx\n", range0_basek<<10, + (range0_basek + state->range_sizek)<<10); + state->reg = range_to_mtrr(state->reg, range0_basek, + state->range_sizek, MTRR_TYPE_WRBACK); + return 0; + } + + range0_sizek -= chunk_sizek; + if (range0_sizek && sizek) { + while (range0_basek + range0_sizek > (basek + sizek)) { range0_sizek -= chunk_sizek; if (!range0_sizek) break; } } + if (range0_sizek) { + printk(KERN_DEBUG "range0: %016lx - %016lx\n", range0_basek<<10, + (range0_basek + range0_sizek)<<10); + state->reg = range_to_mtrr(state->reg, range0_basek, + range0_sizek, MTRR_TYPE_WRBACK); - if (range0_sizek > chunk_sizek) - range0_sizek -= chunk_sizek; - printk(KERN_INFO "range0: %016lx - %016lx\n", range0_basek<<10, (range0_basek + range0_sizek)<<10); - state->reg = range_to_mtrr(state->reg, range0_basek, - range0_sizek, MTRR_TYPE_WRBACK, state->address_bits); + } range_basek = range0_basek + range0_sizek; range_sizek = chunk_sizek; - if ((range_sizek - (state->range_sizek - range0_sizek) < (chunk_sizek >> 1)) && - (range_basek + range_sizek <= basek)) { - hole_sizek = range_sizek - (state->range_sizek - range0_sizek); - hole_basek = range_basek + range_sizek - hole_sizek; - } else - range_sizek = state->range_sizek - range0_sizek; - - printk(KERN_INFO "range: %016lx - %016lx\n", range_basek<<10, (range_basek + range_sizek)<<10); - state->reg = range_to_mtrr(state->reg, range_basek, - range_sizek, MTRR_TYPE_WRBACK, state->address_bits); - if (hole_sizek) { - printk(KERN_INFO "hole: %016lx - %016lx\n", hole_basek<<10, (hole_basek + hole_sizek)<<10); - state->reg = range_to_mtrr(state->reg, hole_basek, - hole_sizek, MTRR_TYPE_UNCACHABLE, state->address_bits); + if (range_basek + range_sizek > basek && + range_basek + range_sizek <= (basek + sizek)) { + /* one hole */ + second_basek = basek; + second_sizek = range_basek + range_sizek - basek; } + + /* if last piece, only could one hole near end */ + if ((second_basek || !basek) && + range_sizek - (state->range_sizek - range0_sizek) - second_sizek < + (chunk_sizek >> 1)) { + /* + * one hole in middle (second_sizek is 0) or at end + * (second_sizek is 0 ) + */ + hole_sizek = range_sizek - (state->range_sizek - range0_sizek) + - second_sizek; + hole_basek = range_basek + range_sizek - hole_sizek + - second_sizek; + } else { + /* fallback for big hole, or several holes */ + range_sizek = state->range_sizek - range0_sizek; + second_basek = 0; + second_sizek = 0; + } + + printk(KERN_DEBUG "range: %016lx - %016lx\n", range_basek<<10, + (range_basek + range_sizek)<<10); + state->reg = range_to_mtrr(state->reg, range_basek, range_sizek, + MTRR_TYPE_WRBACK); + if (hole_sizek) { + printk(KERN_DEBUG "hole: %016lx - %016lx\n", hole_basek<<10, + (hole_basek + hole_sizek)<<10); + state->reg = range_to_mtrr(state->reg, hole_basek, hole_sizek, + MTRR_TYPE_UNCACHABLE); + + } + + return second_sizek; } static void __init @@ -893,6 +1036,7 @@ set_var_mtrr_range(struct var_mtrr_state *state, unsigned long base_pfn, unsigned long size_pfn) { unsigned long basek, sizek; + unsigned long second_sizek = 0; if (state->reg >= num_var_ranges) return; @@ -901,21 +1045,19 @@ set_var_mtrr_range(struct var_mtrr_state *state, unsigned long base_pfn, sizek = size_pfn << (PAGE_SHIFT - 10); /* See if I can merge with the last range */ - if ((basek <= 1024) || (state->range_startk + state->range_sizek == basek)) { + if ((basek <= 1024) || + (state->range_startk + state->range_sizek == basek)) { unsigned long endk = basek + sizek; state->range_sizek = endk - state->range_startk; return; } /* Write the range mtrrs */ - if (state->range_sizek != 0) { - range_to_mtrr_with_hole(state, basek); + if (state->range_sizek != 0) + second_sizek = range_to_mtrr_with_hole(state, basek, sizek); - state->range_startk = 0; - state->range_sizek = 0; - } /* Allocate an msr */ - state->range_startk = basek; - state->range_sizek = sizek; + state->range_startk = basek + second_sizek; + state->range_sizek = sizek - second_sizek; } /* mininum size of mtrr block that can take hole */ @@ -931,7 +1073,7 @@ static int __init parse_mtrr_chunk_size_opt(char *p) early_param("mtrr_chunk_size", parse_mtrr_chunk_size_opt); /* granity of mtrr of block */ -static u64 mtrr_gran_size __initdata = (1ULL<<20); +static u64 mtrr_gran_size __initdata; static int __init parse_mtrr_gran_size_opt(char *p) { @@ -942,91 +1084,84 @@ static int __init parse_mtrr_gran_size_opt(char *p) } early_param("mtrr_gran_size", parse_mtrr_gran_size_opt); -static void __init +static int nr_mtrr_spare_reg __initdata = + CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT; + +static int __init parse_mtrr_spare_reg(char *arg) +{ + if (arg) + nr_mtrr_spare_reg = simple_strtoul(arg, NULL, 0); + return 0; +} + +early_param("mtrr_spare_reg_nr", parse_mtrr_spare_reg); + +static int __init x86_setup_var_mtrrs(struct res_range *range, int nr_range, - unsigned address_bits) + u64 chunk_size, u64 gran_size) { struct var_mtrr_state var_state; int i; + int num_reg; var_state.range_startk = 0; var_state.range_sizek = 0; var_state.reg = 0; - var_state.address_bits = address_bits; - var_state.chunk_sizek = mtrr_chunk_size >> 10; - var_state.gran_sizek = mtrr_gran_size >> 10; + var_state.chunk_sizek = chunk_size >> 10; + var_state.gran_sizek = gran_size >> 10; + + memset(range_state, 0, sizeof(range_state)); /* Write the range etc */ for (i = 0; i < nr_range; i++) - set_var_mtrr_range(&var_state, range[i].start, range[i].end - range[i].start + 1); + set_var_mtrr_range(&var_state, range[i].start, + range[i].end - range[i].start + 1); /* Write the last range */ - range_to_mtrr_with_hole(&var_state, 0); - printk(KERN_INFO "DONE variable MTRRs\n"); + if (var_state.range_sizek != 0) + range_to_mtrr_with_hole(&var_state, 0, 0); + printk(KERN_DEBUG "DONE variable MTRRs\n"); + + num_reg = var_state.reg; /* Clear out the extra MTRR's */ while (var_state.reg < num_var_ranges) { - set_var_mtrr(var_state.reg, 0, 0, 0, var_state.address_bits); + save_var_mtrr(var_state.reg, 0, 0, 0); var_state.reg++; } + + return num_reg; } -static int __init -x86_get_mtrr_mem_range(struct res_range *range, int nr_range, - unsigned long extra_remove_base, - unsigned long extra_remove_size) -{ - unsigned long i, base, size; - mtrr_type type; +struct mtrr_cleanup_result { + unsigned long gran_sizek; + unsigned long chunk_sizek; + unsigned long lose_cover_sizek; + unsigned int num_reg; + int bad; +}; - for (i = 0; i < num_var_ranges; i++) { - mtrr_if->get(i, &base, &size, &type); - if (type != MTRR_TYPE_WRBACK) - continue; - nr_range = add_range_with_merge(range, nr_range, base, base + size - 1); - } - printk(KERN_INFO "After WB checking\n"); - for (i = 0; i < nr_range; i++) - printk(KERN_INFO "MTRR MAP PFN: %016lx - %016lx\n", range[i].start, range[i].end + 1); +/* + * gran_size: 1M, 2M, ..., 2G + * chunk size: gran_size, ..., 4G + * so we need (2+13)*6 + */ +#define NUM_RESULT 90 +#define PSHIFT (PAGE_SHIFT - 10) - /* take out UC ranges */ - for (i = 0; i < num_var_ranges; i++) { - mtrr_if->get(i, &base, &size, &type); - if (type != MTRR_TYPE_UNCACHABLE) - continue; - if (!size) - continue; - subtract_range(range, base, base + size - 1); - } - if (extra_remove_size) - subtract_range(range, extra_remove_base, extra_remove_base + extra_remove_size - 1); - - /* get new range num */ - nr_range = 0; - for (i = 0; i < RANGE_NUM; i++) { - if (!range[i].end) - continue; - nr_range++; - } - printk(KERN_INFO "After UC checking\n"); - for (i = 0; i < nr_range; i++) - printk(KERN_INFO "MTRR MAP PFN: %016lx - %016lx\n", range[i].start, range[i].end + 1); - - /* sort the ranges */ - sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL); - printk(KERN_INFO "After sorting\n"); - for (i = 0; i < nr_range; i++) - printk(KERN_INFO "MTRR MAP PFN: %016lx - %016lx\n", range[i].start, range[i].end + 1); - - return nr_range; -} +static struct mtrr_cleanup_result __initdata result[NUM_RESULT]; +static struct res_range __initdata range_new[RANGE_NUM]; +static unsigned long __initdata min_loss_pfn[RANGE_NUM]; static int __init mtrr_cleanup(unsigned address_bits) { unsigned long extra_remove_base, extra_remove_size; unsigned long i, base, size, def, dummy; - struct res_range range[RANGE_NUM]; mtrr_type type; - int nr_range; + int nr_range, nr_range_new; + u64 chunk_size, gran_size; + unsigned long range_sums, range_sums_new; + int index_good; + int num_reg_good; /* extra one for all 0 */ int num[MTRR_NUM_TYPES + 1]; @@ -1038,10 +1173,20 @@ static int __init mtrr_cleanup(unsigned address_bits) if (def != MTRR_TYPE_UNCACHABLE) return 0; + /* get it and store it aside */ + memset(range_state, 0, sizeof(range_state)); + for (i = 0; i < num_var_ranges; i++) { + mtrr_if->get(i, &base, &size, &type); + range_state[i].base_pfn = base; + range_state[i].size_pfn = size; + range_state[i].type = type; + } + /* check entries number */ memset(num, 0, sizeof(num)); for (i = 0; i < num_var_ranges; i++) { - mtrr_if->get(i, &base, &size, &type); + type = range_state[i].type; + size = range_state[i].size_pfn; if (type >= MTRR_NUM_TYPES) continue; if (!size) @@ -1062,15 +1207,172 @@ static int __init mtrr_cleanup(unsigned address_bits) extra_remove_size = 0; if (mtrr_tom2) { extra_remove_base = 1 << (32 - PAGE_SHIFT); - extra_remove_size = (mtrr_tom2>>PAGE_SHIFT) - extra_remove_base; + extra_remove_size = + (mtrr_tom2 >> PAGE_SHIFT) - extra_remove_base; } - nr_range = x86_get_mtrr_mem_range(range, 0, extra_remove_base, extra_remove_size); + nr_range = x86_get_mtrr_mem_range(range, 0, extra_remove_base, + extra_remove_size); + range_sums = sum_ranges(range, nr_range); + printk(KERN_INFO "total RAM coverred: %ldM\n", + range_sums >> (20 - PAGE_SHIFT)); - /* convert ranges to var ranges state */ - x86_setup_var_mtrrs(range, nr_range, address_bits); + if (mtrr_chunk_size && mtrr_gran_size) { + int num_reg; - return 1; + /* convert ranges to var ranges state */ + num_reg = x86_setup_var_mtrrs(range, nr_range, mtrr_chunk_size, + mtrr_gran_size); + + /* we got new setting in range_state, check it */ + memset(range_new, 0, sizeof(range_new)); + nr_range_new = x86_get_mtrr_mem_range(range_new, 0, + extra_remove_base, + extra_remove_size); + range_sums_new = sum_ranges(range_new, nr_range_new); + + i = 0; + result[i].chunk_sizek = mtrr_chunk_size >> 10; + result[i].gran_sizek = mtrr_gran_size >> 10; + result[i].num_reg = num_reg; + if (range_sums < range_sums_new) { + result[i].lose_cover_sizek = + (range_sums_new - range_sums) << PSHIFT; + result[i].bad = 1; + } else + result[i].lose_cover_sizek = + (range_sums - range_sums_new) << PSHIFT; + + printk(KERN_INFO " %sgran_size: %ldM \tchunk_size: %ldM \t", + result[i].bad?" BAD ":"", result[i].gran_sizek >> 10, + result[i].chunk_sizek >> 10); + printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ldM \n", + result[i].num_reg, result[i].bad?"-":"", + result[i].lose_cover_sizek >> 10); + if (!result[i].bad) { + set_var_mtrr_all(address_bits); + return 1; + } + printk(KERN_INFO "invalid mtrr_gran_size or mtrr_chunk_size, " + "will find optimal one\n"); + memset(result, 0, sizeof(result[0])); + } + + i = 0; + memset(min_loss_pfn, 0xff, sizeof(min_loss_pfn)); + memset(result, 0, sizeof(result)); + for (gran_size = (1ULL<<20); gran_size < (1ULL<<32); gran_size <<= 1) { + for (chunk_size = gran_size; chunk_size < (1ULL<<33); + chunk_size <<= 1) { + int num_reg; + + printk(KERN_INFO + "\ngran_size: %lldM chunk_size_size: %lldM\n", + gran_size >> 20, chunk_size >> 20); + if (i >= NUM_RESULT) + continue; + + /* convert ranges to var ranges state */ + num_reg = x86_setup_var_mtrrs(range, nr_range, + chunk_size, gran_size); + + /* we got new setting in range_state, check it */ + memset(range_new, 0, sizeof(range_new)); + nr_range_new = x86_get_mtrr_mem_range(range_new, 0, + extra_remove_base, extra_remove_size); + range_sums_new = sum_ranges(range_new, nr_range_new); + + result[i].chunk_sizek = chunk_size >> 10; + result[i].gran_sizek = gran_size >> 10; + result[i].num_reg = num_reg; + if (range_sums < range_sums_new) { + result[i].lose_cover_sizek = + (range_sums_new - range_sums) << PSHIFT; + result[i].bad = 1; + } else + result[i].lose_cover_sizek = + (range_sums - range_sums_new) << PSHIFT; + + /* double check it */ + if (!result[i].bad && !result[i].lose_cover_sizek) { + if (nr_range_new != nr_range || + memcmp(range, range_new, sizeof(range))) + result[i].bad = 1; + } + + if (!result[i].bad && (range_sums - range_sums_new < + min_loss_pfn[num_reg])) { + min_loss_pfn[num_reg] = + range_sums - range_sums_new; + } + i++; + } + } + + /* print out all */ + for (i = 0; i < NUM_RESULT; i++) { + printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t", + result[i].bad?"*BAD* ":" ", result[i].gran_sizek >> 10, + result[i].chunk_sizek >> 10); + printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ldM \n", + result[i].num_reg, result[i].bad?"-":"", + result[i].lose_cover_sizek >> 10); + } + + /* try to find the optimal index */ + if (nr_mtrr_spare_reg >= num_var_ranges) + nr_mtrr_spare_reg = num_var_ranges - 1; + num_reg_good = -1; + for (i = 1; i < num_var_ranges + 1 - nr_mtrr_spare_reg; i++) { + if (!min_loss_pfn[i]) { + num_reg_good = i; + break; + } + } + + index_good = -1; + if (num_reg_good != -1) { + for (i = 0; i < NUM_RESULT; i++) { + if (!result[i].bad && + result[i].num_reg == num_reg_good && + !result[i].lose_cover_sizek) { + index_good = i; + break; + } + } + } + + if (index_good != -1) { + printk(KERN_INFO "Found optimal setting for mtrr clean up\n"); + i = index_good; + printk(KERN_INFO "gran_size: %ldM \tchunk_size: %ldM \t", + result[i].gran_sizek >> 10, + result[i].chunk_sizek >> 10); + printk(KERN_CONT "num_reg: %d \tlose cover RAM: %ldM \n", + result[i].num_reg, + result[i].lose_cover_sizek >> 10); + /* convert ranges to var ranges state */ + chunk_size = result[i].chunk_sizek; + chunk_size <<= 10; + gran_size = result[i].gran_sizek; + gran_size <<= 10; + x86_setup_var_mtrrs(range, nr_range, chunk_size, gran_size); + set_var_mtrr_all(address_bits); + return 1; + } + + printk(KERN_INFO "mtrr_cleanup: can not find optimal value\n"); + printk(KERN_INFO "please specify mtrr_gran_size/mtrr_chunk_size\n"); + + return 0; } +#else +static int __init mtrr_cleanup(unsigned address_bits) +{ + return 0; +} +#endif + +static int __initdata changed_by_mtrr_cleanup; static int disable_mtrr_trim; @@ -1111,7 +1413,8 @@ int __init amd_special_default_mtrr(void) return 0; } -static u64 __init real_trim_memory(unsigned long start_pfn, unsigned long limit_pfn) +static u64 __init real_trim_memory(unsigned long start_pfn, + unsigned long limit_pfn) { u64 trim_start, trim_size; trim_start = start_pfn; @@ -1138,9 +1441,8 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) { unsigned long i, base, size, highest_pfn = 0, def, dummy; mtrr_type type; - struct res_range range[RANGE_NUM]; int nr_range; - u64 total_real_trim_size; + u64 total_trim_size; /* extra one for all 0 */ int num[MTRR_NUM_TYPES + 1]; @@ -1155,11 +1457,22 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) if (def != MTRR_TYPE_UNCACHABLE) return 0; - /* Find highest cached pfn */ + /* get it and store it aside */ + memset(range_state, 0, sizeof(range_state)); for (i = 0; i < num_var_ranges; i++) { mtrr_if->get(i, &base, &size, &type); + range_state[i].base_pfn = base; + range_state[i].size_pfn = size; + range_state[i].type = type; + } + + /* Find highest cached pfn */ + for (i = 0; i < num_var_ranges; i++) { + type = range_state[i].type; if (type != MTRR_TYPE_WRBACK) continue; + base = range_state[i].base_pfn; + size = range_state[i].size_pfn; if (highest_pfn < base + size) highest_pfn = base + size; } @@ -1177,9 +1490,10 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) /* check entries number */ memset(num, 0, sizeof(num)); for (i = 0; i < num_var_ranges; i++) { - mtrr_if->get(i, &base, &size, &type); + type = range_state[i].type; if (type >= MTRR_NUM_TYPES) continue; + size = range_state[i].size_pfn; if (!size) type = MTRR_NUM_TYPES; num[type]++; @@ -1205,26 +1519,28 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) } nr_range = x86_get_mtrr_mem_range(range, nr_range, 0, 0); - total_real_trim_size = 0; + total_trim_size = 0; /* check the head */ if (range[0].start) - total_real_trim_size += real_trim_memory(0, range[0].start); + total_trim_size += real_trim_memory(0, range[0].start); /* check the holes */ for (i = 0; i < nr_range - 1; i++) { if (range[i].end + 1 < range[i+1].start) - total_real_trim_size += real_trim_memory(range[i].end + 1, range[i+1].start); + total_trim_size += real_trim_memory(range[i].end + 1, + range[i+1].start); } /* check the top */ i = nr_range - 1; if (range[i].end + 1 < end_pfn) - total_real_trim_size += real_trim_memory(range[i].end + 1, end_pfn); + total_trim_size += real_trim_memory(range[i].end + 1, + end_pfn); - if (total_real_trim_size) { + if (total_trim_size) { printk(KERN_WARNING "WARNING: BIOS bug: CPU MTRRs don't cover" " all of memory, losing %lluMB of RAM.\n", - total_real_trim_size >> 20); + total_trim_size >> 20); - if (enable_mtrr_cleanup < 1) + if (!changed_by_mtrr_cleanup) WARN_ON(1); printk(KERN_INFO "update e820 for mtrr\n"); @@ -1314,8 +1630,10 @@ void __init mtrr_bp_init(void) if (use_intel()) { get_mtrr_state(); - if (mtrr_cleanup(phys_addr)) + if (mtrr_cleanup(phys_addr)) { + changed_by_mtrr_cleanup = 1; mtrr_if->set_all(); + } } } @@ -1355,7 +1673,7 @@ static int __init mtrr_init_finialize(void) if (!mtrr_if) return 0; if (use_intel()) { - if (enable_mtrr_cleanup < 1) + if (!changed_by_mtrr_cleanup) mtrr_state_warn(); } else { /* The CPUs haven't MTRR and seem to not support SMP. They have From 833e78bfeeef628f0201349a0a05a54f48f07884 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 5 May 2008 15:57:38 -0700 Subject: [PATCH 116/821] x86: process fam 10h like k8 with fixed mtrr setting otherwise fixed MTRR for family 10h may not be changed. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/mtrr/generic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index 5aae648600bf..a83f5cd78885 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -342,7 +342,7 @@ static void set_fixed_range(int msr, bool *changed, unsigned int *msrwords) if (lo != msrwords[0] || hi != msrwords[1]) { if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD && - boot_cpu_data.x86 == 15 && + (boot_cpu_data.x86 >= 0x0f && boot_cpu_data.x86 <= 0x11) && ((msrwords[0] | msrwords[1]) & K8_MTRR_RDMEM_WRMEM_MASK)) k8_enable_fixed_iorrs(); mtrr_wrmsr(msr, msrwords[0], msrwords[1]); From b79cd8f1268bab57ff85b19d131f7f23deab2dee Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 11 May 2008 00:30:15 -0700 Subject: [PATCH 117/821] x86: make e820.c to have common functions remove the duplicated copy of these functions. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/e820.c | 475 +++++++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_32.c | 411 +------------------------------- arch/x86/kernel/e820_64.c | 444 ---------------------------------- arch/x86/kernel/setup_32.c | 2 +- include/asm-x86/e820.h | 14 ++ include/asm-x86/e820_32.h | 12 - include/asm-x86/e820_64.h | 12 - 8 files changed, 496 insertions(+), 876 deletions(-) create mode 100644 arch/x86/kernel/e820.c diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 5e618c3b4720..5369a4e36f17 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -22,7 +22,7 @@ obj-y += setup_$(BITS).o i8259_$(BITS).o setup.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o -obj-y += bootflag.o e820_$(BITS).o +obj-y += bootflag.o e820_$(BITS).o e820.o obj-y += pci-dma.o quirks.o i8237.o topology.o kdebugfs.o obj-y += alternative.o i8253.o pci-nommu.o obj-$(CONFIG_X86_64) += bugs_64.o diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c new file mode 100644 index 000000000000..2cb686f60d0d --- /dev/null +++ b/arch/x86/kernel/e820.c @@ -0,0 +1,475 @@ +/* + * Handle the memory map. + * The functions here do the job until bootmem takes over. + * + * Getting sanitize_e820_map() in sync with i386 version by applying change: + * - Provisions for empty E820 memory regions (reported by certain BIOSes). + * Alex Achenbach , December 2002. + * Venkatesh Pallipadi + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +struct e820map e820; + +/* For PCI or other memory-mapped resources */ +unsigned long pci_mem_start = 0xaeedbabe; +#ifdef CONFIG_PCI +EXPORT_SYMBOL(pci_mem_start); +#endif + +/* + * This function checks if any part of the range is mapped + * with type. + */ +int +e820_any_mapped(u64 start, u64 end, unsigned type) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + + if (type && ei->type != type) + continue; + if (ei->addr >= end || ei->addr + ei->size <= start) + continue; + return 1; + } + return 0; +} +EXPORT_SYMBOL_GPL(e820_any_mapped); + +/* + * This function checks if the entire range is mapped with type. + * + * Note: this function only works correct if the e820 table is sorted and + * not-overlapping, which is the case + */ +int __init e820_all_mapped(u64 start, u64 end, unsigned type) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + + if (type && ei->type != type) + continue; + /* is the region (part) in overlap with the current region ?*/ + if (ei->addr >= end || ei->addr + ei->size <= start) + continue; + + /* if the region is at the beginning of we move + * start to the end of the region since it's ok until there + */ + if (ei->addr <= start) + start = ei->addr + ei->size; + /* + * if start is now at or beyond end, we're done, full + * coverage + */ + if (start >= end) + return 1; + } + return 0; +} + +/* + * Add a memory region to the kernel e820 map. + */ +void __init add_memory_region(u64 start, u64 size, int type) +{ + int x = e820.nr_map; + + if (x == E820MAX) { + printk(KERN_ERR "Ooops! Too many entries in the memory map!\n"); + return; + } + + e820.map[x].addr = start; + e820.map[x].size = size; + e820.map[x].type = type; + e820.nr_map++; +} + +void __init e820_print_map(char *who) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + printk(KERN_INFO " %s: %016Lx - %016Lx ", who, + (unsigned long long) e820.map[i].addr, + (unsigned long long) + (e820.map[i].addr + e820.map[i].size)); + switch (e820.map[i].type) { + case E820_RAM: + printk(KERN_CONT "(usable)\n"); + break; + case E820_RESERVED: + printk(KERN_CONT "(reserved)\n"); + break; + case E820_ACPI: + printk(KERN_CONT "(ACPI data)\n"); + break; + case E820_NVS: + printk(KERN_CONT "(ACPI NVS)\n"); + break; + default: + printk(KERN_CONT "type %u\n", e820.map[i].type); + break; + } + } +} + +/* + * Sanitize the BIOS e820 map. + * + * Some e820 responses include overlapping entries. The following + * replaces the original e820 map with a new one, removing overlaps. + * + */ +int __init sanitize_e820_map(struct e820entry *biosmap, char *pnr_map) +{ + struct change_member { + struct e820entry *pbios; /* pointer to original bios entry */ + unsigned long long addr; /* address for this change point */ + }; + static struct change_member change_point_list[2*E820MAX] __initdata; + static struct change_member *change_point[2*E820MAX] __initdata; + static struct e820entry *overlap_list[E820MAX] __initdata; + static struct e820entry new_bios[E820MAX] __initdata; + struct change_member *change_tmp; + unsigned long current_type, last_type; + unsigned long long last_addr; + int chgidx, still_changing; + int overlap_entries; + int new_bios_entry; + int old_nr, new_nr, chg_nr; + int i; + + /* + Visually we're performing the following + (1,2,3,4 = memory types)... + + Sample memory map (w/overlaps): + ____22__________________ + ______________________4_ + ____1111________________ + _44_____________________ + 11111111________________ + ____________________33__ + ___________44___________ + __________33333_________ + ______________22________ + ___________________2222_ + _________111111111______ + _____________________11_ + _________________4______ + + Sanitized equivalent (no overlap): + 1_______________________ + _44_____________________ + ___1____________________ + ____22__________________ + ______11________________ + _________1______________ + __________3_____________ + ___________44___________ + _____________33_________ + _______________2________ + ________________1_______ + _________________4______ + ___________________2____ + ____________________33__ + ______________________4_ + */ + + /* if there's only one memory region, don't bother */ + if (*pnr_map < 2) + return -1; + + old_nr = *pnr_map; + + /* bail out if we find any unreasonable addresses in bios map */ + for (i = 0; i < old_nr; i++) + if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr) + return -1; + + /* create pointers for initial change-point information (for sorting) */ + for (i = 0; i < 2 * old_nr; i++) + change_point[i] = &change_point_list[i]; + + /* record all known change-points (starting and ending addresses), + omitting those that are for empty memory regions */ + chgidx = 0; + for (i = 0; i < old_nr; i++) { + if (biosmap[i].size != 0) { + change_point[chgidx]->addr = biosmap[i].addr; + change_point[chgidx++]->pbios = &biosmap[i]; + change_point[chgidx]->addr = biosmap[i].addr + + biosmap[i].size; + change_point[chgidx++]->pbios = &biosmap[i]; + } + } + chg_nr = chgidx; + + /* sort change-point list by memory addresses (low -> high) */ + still_changing = 1; + while (still_changing) { + still_changing = 0; + for (i = 1; i < chg_nr; i++) { + unsigned long long curaddr, lastaddr; + unsigned long long curpbaddr, lastpbaddr; + + curaddr = change_point[i]->addr; + lastaddr = change_point[i - 1]->addr; + curpbaddr = change_point[i]->pbios->addr; + lastpbaddr = change_point[i - 1]->pbios->addr; + + /* + * swap entries, when: + * + * curaddr > lastaddr or + * curaddr == lastaddr and curaddr == curpbaddr and + * lastaddr != lastpbaddr + */ + if (curaddr < lastaddr || + (curaddr == lastaddr && curaddr == curpbaddr && + lastaddr != lastpbaddr)) { + change_tmp = change_point[i]; + change_point[i] = change_point[i-1]; + change_point[i-1] = change_tmp; + still_changing = 1; + } + } + } + + /* create a new bios memory map, removing overlaps */ + overlap_entries = 0; /* number of entries in the overlap table */ + new_bios_entry = 0; /* index for creating new bios map entries */ + last_type = 0; /* start with undefined memory type */ + last_addr = 0; /* start with 0 as last starting address */ + + /* loop through change-points, determining affect on the new bios map */ + for (chgidx = 0; chgidx < chg_nr; chgidx++) { + /* keep track of all overlapping bios entries */ + if (change_point[chgidx]->addr == + change_point[chgidx]->pbios->addr) { + /* + * add map entry to overlap list (> 1 entry + * implies an overlap) + */ + overlap_list[overlap_entries++] = + change_point[chgidx]->pbios; + } else { + /* + * remove entry from list (order independent, + * so swap with last) + */ + for (i = 0; i < overlap_entries; i++) { + if (overlap_list[i] == + change_point[chgidx]->pbios) + overlap_list[i] = + overlap_list[overlap_entries-1]; + } + overlap_entries--; + } + /* + * if there are overlapping entries, decide which + * "type" to use (larger value takes precedence -- + * 1=usable, 2,3,4,4+=unusable) + */ + current_type = 0; + for (i = 0; i < overlap_entries; i++) + if (overlap_list[i]->type > current_type) + current_type = overlap_list[i]->type; + /* + * continue building up new bios map based on this + * information + */ + if (current_type != last_type) { + if (last_type != 0) { + new_bios[new_bios_entry].size = + change_point[chgidx]->addr - last_addr; + /* + * move forward only if the new size + * was non-zero + */ + if (new_bios[new_bios_entry].size != 0) + /* + * no more space left for new + * bios entries ? + */ + if (++new_bios_entry >= E820MAX) + break; + } + if (current_type != 0) { + new_bios[new_bios_entry].addr = + change_point[chgidx]->addr; + new_bios[new_bios_entry].type = current_type; + last_addr = change_point[chgidx]->addr; + } + last_type = current_type; + } + } + /* retain count for new bios entries */ + new_nr = new_bios_entry; + + /* copy new bios mapping into original location */ + memcpy(biosmap, new_bios, new_nr * sizeof(struct e820entry)); + *pnr_map = new_nr; + + return 0; +} + +/* + * Copy the BIOS e820 map into a safe place. + * + * Sanity-check it while we're at it.. + * + * If we're lucky and live on a modern system, the setup code + * will have given us a memory map that we can use to properly + * set up memory. If we aren't, we'll fake a memory map. + */ +int __init copy_e820_map(struct e820entry *biosmap, int nr_map) +{ + /* Only one memory region (or negative)? Ignore it */ + if (nr_map < 2) + return -1; + + do { + u64 start = biosmap->addr; + u64 size = biosmap->size; + u64 end = start + size; + u32 type = biosmap->type; + + /* Overflow in 64 bits? Ignore the memory map. */ + if (start > end) + return -1; + + add_memory_region(start, size, type); + } while (biosmap++, --nr_map); + return 0; +} + +u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, + unsigned new_type) +{ + int i; + u64 real_updated_size = 0; + + BUG_ON(old_type == new_type); + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + u64 final_start, final_end; + if (ei->type != old_type) + continue; + /* totally covered? */ + if (ei->addr >= start && + (ei->addr + ei->size) <= (start + size)) { + ei->type = new_type; + real_updated_size += ei->size; + continue; + } + /* partially covered */ + final_start = max(start, ei->addr); + final_end = min(start + size, ei->addr + ei->size); + if (final_start >= final_end) + continue; + add_memory_region(final_start, final_end - final_start, + new_type); + real_updated_size += final_end - final_start; + } + return real_updated_size; +} + +void __init update_e820(void) +{ + u8 nr_map; + + nr_map = e820.nr_map; + if (sanitize_e820_map(e820.map, &nr_map)) + return; + e820.nr_map = nr_map; + printk(KERN_INFO "modified physical RAM map:\n"); + e820_print_map("modified"); +} + +/* + * Search for the biggest gap in the low 32 bits of the e820 + * memory space. We pass this space to PCI to assign MMIO resources + * for hotplug or unconfigured devices in. + * Hopefully the BIOS let enough space left. + */ +__init void e820_setup_gap(void) +{ + unsigned long gapstart, gapsize, round; + unsigned long long last; + int i; + int found = 0; + + last = 0x100000000ull; + gapstart = 0x10000000; + gapsize = 0x400000; + i = e820.nr_map; + while (--i >= 0) { + unsigned long long start = e820.map[i].addr; + unsigned long long end = start + e820.map[i].size; + + /* + * Since "last" is at most 4GB, we know we'll + * fit in 32 bits if this condition is true + */ + if (last > end) { + unsigned long gap = last - end; + + if (gap > gapsize) { + gapsize = gap; + gapstart = end; + found = 1; + } + } + if (start < last) + last = start; + } + +#ifdef CONFIG_X86_64 + if (!found) { + gapstart = (end_pfn << PAGE_SHIFT) + 1024*1024; + printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit " + "address range\n" + KERN_ERR "PCI: Unassigned devices with 32bit resource " + "registers may break!\n"); + } +#endif + + /* + * See how much we want to round up: start off with + * rounding to the next 1MB area. + */ + round = 0x100000; + while ((gapsize >> 4) > round) + round += round; + /* Fun with two's complement */ + pci_mem_start = (gapstart + round) & -round; + + printk(KERN_INFO + "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n", + pci_mem_start, gapstart, gapsize); +} + diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c index 751d517d802c..dfe25751038b 100644 --- a/arch/x86/kernel/e820_32.c +++ b/arch/x86/kernel/e820_32.c @@ -16,21 +16,6 @@ #include #include -struct e820map e820; -struct change_member { - struct e820entry *pbios; /* pointer to original bios entry */ - unsigned long long addr; /* address for this change point */ -}; -static struct change_member change_point_list[2*E820MAX] __initdata; -static struct change_member *change_point[2*E820MAX] __initdata; -static struct e820entry *overlap_list[E820MAX] __initdata; -static struct e820entry new_bios[E820MAX] __initdata; -/* For PCI or other memory-mapped resources */ -unsigned long pci_mem_start = 0x10000000; -#ifdef CONFIG_PCI -EXPORT_SYMBOL(pci_mem_start); -#endif - static struct resource system_rom_resource = { .name = "System ROM", .start = 0xf0000, @@ -254,223 +239,6 @@ void __init e820_mark_nosave_regions(void) } #endif -void __init add_memory_region(unsigned long long start, - unsigned long long size, int type) -{ - int x; - - x = e820.nr_map; - - if (x == E820MAX) { - printk(KERN_ERR "Ooops! Too many entries in the memory map!\n"); - return; - } - - e820.map[x].addr = start; - e820.map[x].size = size; - e820.map[x].type = type; - e820.nr_map++; -} /* add_memory_region */ - -/* - * Sanitize the BIOS e820 map. - * - * Some e820 responses include overlapping entries. The following - * replaces the original e820 map with a new one, removing overlaps. - * - */ -int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map) -{ - struct change_member *change_tmp; - unsigned long current_type, last_type; - unsigned long long last_addr; - int chgidx, still_changing; - int overlap_entries; - int new_bios_entry; - int old_nr, new_nr, chg_nr; - int i; - - /* - Visually we're performing the following (1,2,3,4 = memory types)... - - Sample memory map (w/overlaps): - ____22__________________ - ______________________4_ - ____1111________________ - _44_____________________ - 11111111________________ - ____________________33__ - ___________44___________ - __________33333_________ - ______________22________ - ___________________2222_ - _________111111111______ - _____________________11_ - _________________4______ - - Sanitized equivalent (no overlap): - 1_______________________ - _44_____________________ - ___1____________________ - ____22__________________ - ______11________________ - _________1______________ - __________3_____________ - ___________44___________ - _____________33_________ - _______________2________ - ________________1_______ - _________________4______ - ___________________2____ - ____________________33__ - ______________________4_ - */ - /* if there's only one memory region, don't bother */ - if (*pnr_map < 2) { - return -1; - } - - old_nr = *pnr_map; - - /* bail out if we find any unreasonable addresses in bios map */ - for (i=0; iaddr = biosmap[i].addr; - change_point[chgidx++]->pbios = &biosmap[i]; - change_point[chgidx]->addr = biosmap[i].addr + biosmap[i].size; - change_point[chgidx++]->pbios = &biosmap[i]; - } - } - chg_nr = chgidx; /* true number of change-points */ - - /* sort change-point list by memory addresses (low -> high) */ - still_changing = 1; - while (still_changing) { - still_changing = 0; - for (i=1; i < chg_nr; i++) { - /* if > , swap */ - /* or, if current= & last=, swap */ - if ((change_point[i]->addr < change_point[i-1]->addr) || - ((change_point[i]->addr == change_point[i-1]->addr) && - (change_point[i]->addr == change_point[i]->pbios->addr) && - (change_point[i-1]->addr != change_point[i-1]->pbios->addr)) - ) - { - change_tmp = change_point[i]; - change_point[i] = change_point[i-1]; - change_point[i-1] = change_tmp; - still_changing=1; - } - } - } - - /* create a new bios memory map, removing overlaps */ - overlap_entries=0; /* number of entries in the overlap table */ - new_bios_entry=0; /* index for creating new bios map entries */ - last_type = 0; /* start with undefined memory type */ - last_addr = 0; /* start with 0 as last starting address */ - /* loop through change-points, determining affect on the new bios map */ - for (chgidx=0; chgidx < chg_nr; chgidx++) - { - /* keep track of all overlapping bios entries */ - if (change_point[chgidx]->addr == change_point[chgidx]->pbios->addr) - { - /* add map entry to overlap list (> 1 entry implies an overlap) */ - overlap_list[overlap_entries++]=change_point[chgidx]->pbios; - } - else - { - /* remove entry from list (order independent, so swap with last) */ - for (i=0; ipbios) - overlap_list[i] = overlap_list[overlap_entries-1]; - } - overlap_entries--; - } - /* if there are overlapping entries, decide which "type" to use */ - /* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */ - current_type = 0; - for (i=0; itype > current_type) - current_type = overlap_list[i]->type; - /* continue building up new bios map based on this information */ - if (current_type != last_type) { - if (last_type != 0) { - new_bios[new_bios_entry].size = - change_point[chgidx]->addr - last_addr; - /* move forward only if the new size was non-zero */ - if (new_bios[new_bios_entry].size != 0) - if (++new_bios_entry >= E820MAX) - break; /* no more space left for new bios entries */ - } - if (current_type != 0) { - new_bios[new_bios_entry].addr = change_point[chgidx]->addr; - new_bios[new_bios_entry].type = current_type; - last_addr=change_point[chgidx]->addr; - } - last_type = current_type; - } - } - new_nr = new_bios_entry; /* retain count for new bios entries */ - - /* copy new bios mapping into original location */ - memcpy(biosmap, new_bios, new_nr*sizeof(struct e820entry)); - *pnr_map = new_nr; - - return 0; -} - -/* - * Copy the BIOS e820 map into a safe place. - * - * Sanity-check it while we're at it.. - * - * If we're lucky and live on a modern system, the setup code - * will have given us a memory map that we can use to properly - * set up memory. If we aren't, we'll fake a memory map. - * - * We check to see that the memory map contains at least 2 elements - * before we'll use it, because the detection code in setup.S may - * not be perfect and most every PC known to man has two memory - * regions: one from 0 to 640k, and one from 1mb up. (The IBM - * thinkpad 560x, for example, does not cooperate with the memory - * detection code.) - */ -int __init copy_e820_map(struct e820entry *biosmap, int nr_map) -{ - /* Only one memory region (or negative)? Ignore it */ - if (nr_map < 2) - return -1; - - do { - u64 start = biosmap->addr; - u64 size = biosmap->size; - u64 end = start + size; - u32 type = biosmap->type; - - /* Overflow in 64 bits? Ignore the memory map. */ - if (start > end) - return -1; - - add_memory_region(start, size, type); - } while (biosmap++, --nr_map); - - return 0; -} - /* * Find the highest page frame number we have available */ @@ -535,86 +303,12 @@ void __init register_bootmem_low_pages(unsigned long max_low_pfn) } } -void __init e820_register_memory(void) -{ - unsigned long gapstart, gapsize, round; - unsigned long long last; - int i; - - /* - * Search for the biggest gap in the low 32 bits of the e820 - * memory space. - */ - last = 0x100000000ull; - gapstart = 0x10000000; - gapsize = 0x400000; - i = e820.nr_map; - while (--i >= 0) { - unsigned long long start = e820.map[i].addr; - unsigned long long end = start + e820.map[i].size; - - /* - * Since "last" is at most 4GB, we know we'll - * fit in 32 bits if this condition is true - */ - if (last > end) { - unsigned long gap = last - end; - - if (gap > gapsize) { - gapsize = gap; - gapstart = end; - } - } - if (start < last) - last = start; - } - - /* - * See how much we want to round up: start off with - * rounding to the next 1MB area. - */ - round = 0x100000; - while ((gapsize >> 4) > round) - round += round; - /* Fun with two's complement */ - pci_mem_start = (gapstart + round) & -round; - - printk("Allocating PCI resources starting at %08lx (gap: %08lx:%08lx)\n", - pci_mem_start, gapstart, gapsize); -} - -static void __init print_memory_map(char *who) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - printk(" %s: %016Lx - %016Lx ", who, - e820.map[i].addr, - e820.map[i].addr + e820.map[i].size); - switch (e820.map[i].type) { - case E820_RAM: printk("(usable)\n"); - break; - case E820_RESERVED: - printk("(reserved)\n"); - break; - case E820_ACPI: - printk("(ACPI data)\n"); - break; - case E820_NVS: - printk("(ACPI NVS)\n"); - break; - default: printk("type %u\n", e820.map[i].type); - break; - } - } -} - void __init limit_regions(unsigned long long size) { unsigned long long current_addr; int i; - print_memory_map("limit_regions start"); + e820_print_map("limit_regions start"); for (i = 0; i < e820.nr_map; i++) { current_addr = e820.map[i].addr + e820.map[i].size; if (current_addr < size) @@ -633,62 +327,10 @@ void __init limit_regions(unsigned long long size) e820.nr_map = i + 1; e820.map[i].size -= current_addr - size; } - print_memory_map("limit_regions endfor"); + e820_print_map("limit_regions endfor"); return; } - print_memory_map("limit_regions endfunc"); -} - -/* - * This function checks if any part of the range is mapped - * with type. - */ -int -e820_any_mapped(u64 start, u64 end, unsigned type) -{ - int i; - for (i = 0; i < e820.nr_map; i++) { - const struct e820entry *ei = &e820.map[i]; - if (type && ei->type != type) - continue; - if (ei->addr >= end || ei->addr + ei->size <= start) - continue; - return 1; - } - return 0; -} -EXPORT_SYMBOL_GPL(e820_any_mapped); - - /* - * This function checks if the entire range is mapped with type. - * - * Note: this function only works correct if the e820 table is sorted and - * not-overlapping, which is the case - */ -int __init -e820_all_mapped(unsigned long s, unsigned long e, unsigned type) -{ - u64 start = s; - u64 end = e; - int i; - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - if (type && ei->type != type) - continue; - /* is the region (part) in overlap with the current region ?*/ - if (ei->addr >= end || ei->addr + ei->size <= start) - continue; - /* if the region is at the beginning of we move - * start to the end of the region since it's ok until there - */ - if (ei->addr <= start) - start = ei->addr + ei->size; - /* if start is now at or beyond end, we're done, full - * coverage */ - if (start >= end) - return 1; /* we're done */ - } - return 0; + e820_print_map("limit_regions endfunc"); } /* Overridden in paravirt.c if CONFIG_PARAVIRT */ @@ -700,7 +342,7 @@ char * __init __attribute__((weak)) memory_setup(void) void __init setup_memory_map(void) { printk(KERN_INFO "BIOS-provided physical RAM map:\n"); - print_memory_map(memory_setup()); + e820_print_map(memory_setup()); } static int __initdata user_defined_memmap; @@ -783,55 +425,12 @@ static int __init parse_memmap(char *arg) return 0; } early_param("memmap", parse_memmap); -u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, - unsigned new_type) -{ - int i; - u64 real_updated_size = 0; - - BUG_ON(old_type == new_type); - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - u64 final_start, final_end; - if (ei->type != old_type) - continue; - /* totally covered? */ - if (ei->addr >= start && - (ei->addr + ei->size) <= (start + size)) { - ei->type = new_type; - real_updated_size += ei->size; - continue; - } - /* partially covered */ - final_start = max(start, ei->addr); - final_end = min(start + size, ei->addr + ei->size); - if (final_start >= final_end) - continue; - add_memory_region(final_start, final_end - final_start, - new_type); - real_updated_size += final_end - final_start; - } - - return real_updated_size; -} void __init finish_e820_parsing(void) { if (user_defined_memmap) { printk(KERN_INFO "user-defined physical RAM map:\n"); - print_memory_map("user"); + e820_print_map("user"); } } -void __init update_e820(void) -{ - u8 nr_map; - - nr_map = e820.nr_map; - if (sanitize_e820_map(e820.map, &nr_map)) - return; - e820.nr_map = nr_map; - printk(KERN_INFO "modified physical RAM map:\n"); - print_memory_map("modified"); -} diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index c45b4dea4055..28a14eb65d3d 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -29,8 +29,6 @@ #include #include -struct e820map e820; - /* * PFN of last memory page. */ @@ -176,62 +174,6 @@ again: } return changed; } -/* - * This function checks if any part of the range is mapped - * with type. - */ -int -e820_any_mapped(unsigned long start, unsigned long end, unsigned type) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - - if (type && ei->type != type) - continue; - if (ei->addr >= end || ei->addr + ei->size <= start) - continue; - return 1; - } - return 0; -} -EXPORT_SYMBOL_GPL(e820_any_mapped); - -/* - * This function checks if the entire range is mapped with type. - * - * Note: this function only works correct if the e820 table is sorted and - * not-overlapping, which is the case - */ -int __init e820_all_mapped(unsigned long start, unsigned long end, - unsigned type) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - - if (type && ei->type != type) - continue; - /* is the region (part) in overlap with the current region ?*/ - if (ei->addr >= end || ei->addr + ei->size <= start) - continue; - - /* if the region is at the beginning of we move - * start to the end of the region since it's ok until there - */ - if (ei->addr <= start) - start = ei->addr + ei->size; - /* - * if start is now at or beyond end, we're done, full - * coverage - */ - if (start >= end) - return 1; - } - return 0; -} /* * Find a free area with specified alignment in a specific range. @@ -434,24 +376,6 @@ e820_register_active_regions(int nid, unsigned long start_pfn, add_active_range(nid, ei_startpfn, ei_endpfn); } -/* - * Add a memory region to the kernel e820 map. - */ -void __init add_memory_region(unsigned long start, unsigned long size, int type) -{ - int x = e820.nr_map; - - if (x == E820MAX) { - printk(KERN_ERR "Ooops! Too many entries in the memory map!\n"); - return; - } - - e820.map[x].addr = start; - e820.map[x].size = size; - e820.map[x].type = type; - e820.nr_map++; -} - /* * Find the hole size (in bytes) in the memory range. * @start: starting address of the memory range to scan @@ -473,266 +397,6 @@ unsigned long __init e820_hole_size(unsigned long start, unsigned long end) return end - start - (ram << PAGE_SHIFT); } -static void __init e820_print_map(char *who) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - printk(KERN_INFO " %s: %016Lx - %016Lx ", who, - (unsigned long long) e820.map[i].addr, - (unsigned long long) - (e820.map[i].addr + e820.map[i].size)); - switch (e820.map[i].type) { - case E820_RAM: - printk(KERN_CONT "(usable)\n"); - break; - case E820_RESERVED: - printk(KERN_CONT "(reserved)\n"); - break; - case E820_ACPI: - printk(KERN_CONT "(ACPI data)\n"); - break; - case E820_NVS: - printk(KERN_CONT "(ACPI NVS)\n"); - break; - default: - printk(KERN_CONT "type %u\n", e820.map[i].type); - break; - } - } -} - -/* - * Sanitize the BIOS e820 map. - * - * Some e820 responses include overlapping entries. The following - * replaces the original e820 map with a new one, removing overlaps. - * - */ -static int __init sanitize_e820_map(struct e820entry *biosmap, char *pnr_map) -{ - struct change_member { - struct e820entry *pbios; /* pointer to original bios entry */ - unsigned long long addr; /* address for this change point */ - }; - static struct change_member change_point_list[2*E820MAX] __initdata; - static struct change_member *change_point[2*E820MAX] __initdata; - static struct e820entry *overlap_list[E820MAX] __initdata; - static struct e820entry new_bios[E820MAX] __initdata; - struct change_member *change_tmp; - unsigned long current_type, last_type; - unsigned long long last_addr; - int chgidx, still_changing; - int overlap_entries; - int new_bios_entry; - int old_nr, new_nr, chg_nr; - int i; - - /* - Visually we're performing the following - (1,2,3,4 = memory types)... - - Sample memory map (w/overlaps): - ____22__________________ - ______________________4_ - ____1111________________ - _44_____________________ - 11111111________________ - ____________________33__ - ___________44___________ - __________33333_________ - ______________22________ - ___________________2222_ - _________111111111______ - _____________________11_ - _________________4______ - - Sanitized equivalent (no overlap): - 1_______________________ - _44_____________________ - ___1____________________ - ____22__________________ - ______11________________ - _________1______________ - __________3_____________ - ___________44___________ - _____________33_________ - _______________2________ - ________________1_______ - _________________4______ - ___________________2____ - ____________________33__ - ______________________4_ - */ - - /* if there's only one memory region, don't bother */ - if (*pnr_map < 2) - return -1; - - old_nr = *pnr_map; - - /* bail out if we find any unreasonable addresses in bios map */ - for (i = 0; i < old_nr; i++) - if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr) - return -1; - - /* create pointers for initial change-point information (for sorting) */ - for (i = 0; i < 2 * old_nr; i++) - change_point[i] = &change_point_list[i]; - - /* record all known change-points (starting and ending addresses), - omitting those that are for empty memory regions */ - chgidx = 0; - for (i = 0; i < old_nr; i++) { - if (biosmap[i].size != 0) { - change_point[chgidx]->addr = biosmap[i].addr; - change_point[chgidx++]->pbios = &biosmap[i]; - change_point[chgidx]->addr = biosmap[i].addr + - biosmap[i].size; - change_point[chgidx++]->pbios = &biosmap[i]; - } - } - chg_nr = chgidx; - - /* sort change-point list by memory addresses (low -> high) */ - still_changing = 1; - while (still_changing) { - still_changing = 0; - for (i = 1; i < chg_nr; i++) { - unsigned long long curaddr, lastaddr; - unsigned long long curpbaddr, lastpbaddr; - - curaddr = change_point[i]->addr; - lastaddr = change_point[i - 1]->addr; - curpbaddr = change_point[i]->pbios->addr; - lastpbaddr = change_point[i - 1]->pbios->addr; - - /* - * swap entries, when: - * - * curaddr > lastaddr or - * curaddr == lastaddr and curaddr == curpbaddr and - * lastaddr != lastpbaddr - */ - if (curaddr < lastaddr || - (curaddr == lastaddr && curaddr == curpbaddr && - lastaddr != lastpbaddr)) { - change_tmp = change_point[i]; - change_point[i] = change_point[i-1]; - change_point[i-1] = change_tmp; - still_changing = 1; - } - } - } - - /* create a new bios memory map, removing overlaps */ - overlap_entries = 0; /* number of entries in the overlap table */ - new_bios_entry = 0; /* index for creating new bios map entries */ - last_type = 0; /* start with undefined memory type */ - last_addr = 0; /* start with 0 as last starting address */ - - /* loop through change-points, determining affect on the new bios map */ - for (chgidx = 0; chgidx < chg_nr; chgidx++) { - /* keep track of all overlapping bios entries */ - if (change_point[chgidx]->addr == - change_point[chgidx]->pbios->addr) { - /* - * add map entry to overlap list (> 1 entry - * implies an overlap) - */ - overlap_list[overlap_entries++] = - change_point[chgidx]->pbios; - } else { - /* - * remove entry from list (order independent, - * so swap with last) - */ - for (i = 0; i < overlap_entries; i++) { - if (overlap_list[i] == - change_point[chgidx]->pbios) - overlap_list[i] = - overlap_list[overlap_entries-1]; - } - overlap_entries--; - } - /* - * if there are overlapping entries, decide which - * "type" to use (larger value takes precedence -- - * 1=usable, 2,3,4,4+=unusable) - */ - current_type = 0; - for (i = 0; i < overlap_entries; i++) - if (overlap_list[i]->type > current_type) - current_type = overlap_list[i]->type; - /* - * continue building up new bios map based on this - * information - */ - if (current_type != last_type) { - if (last_type != 0) { - new_bios[new_bios_entry].size = - change_point[chgidx]->addr - last_addr; - /* - * move forward only if the new size - * was non-zero - */ - if (new_bios[new_bios_entry].size != 0) - /* - * no more space left for new - * bios entries ? - */ - if (++new_bios_entry >= E820MAX) - break; - } - if (current_type != 0) { - new_bios[new_bios_entry].addr = - change_point[chgidx]->addr; - new_bios[new_bios_entry].type = current_type; - last_addr = change_point[chgidx]->addr; - } - last_type = current_type; - } - } - /* retain count for new bios entries */ - new_nr = new_bios_entry; - - /* copy new bios mapping into original location */ - memcpy(biosmap, new_bios, new_nr * sizeof(struct e820entry)); - *pnr_map = new_nr; - - return 0; -} - -/* - * Copy the BIOS e820 map into a safe place. - * - * Sanity-check it while we're at it.. - * - * If we're lucky and live on a modern system, the setup code - * will have given us a memory map that we can use to properly - * set up memory. If we aren't, we'll fake a memory map. - */ -static int __init copy_e820_map(struct e820entry *biosmap, int nr_map) -{ - /* Only one memory region (or negative)? Ignore it */ - if (nr_map < 2) - return -1; - - do { - u64 start = biosmap->addr; - u64 size = biosmap->size; - u64 end = start + size; - u32 type = biosmap->type; - - /* Overflow in 64 bits? Ignore the memory map. */ - if (start > end) - return -1; - - add_memory_region(start, size, type); - } while (biosmap++, --nr_map); - return 0; -} - static void early_panic(char *msg) { early_printk(msg); @@ -829,114 +493,6 @@ void __init finish_e820_parsing(void) } } -u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, - unsigned new_type) -{ - int i; - u64 real_updated_size = 0; - - BUG_ON(old_type == new_type); - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - u64 final_start, final_end; - if (ei->type != old_type) - continue; - /* totally covered? */ - if (ei->addr >= start && - (ei->addr + ei->size) <= (start + size)) { - ei->type = new_type; - real_updated_size += ei->size; - continue; - } - /* partially covered */ - final_start = max(start, ei->addr); - final_end = min(start + size, ei->addr + ei->size); - if (final_start >= final_end) - continue; - add_memory_region(final_start, final_end - final_start, - new_type); - real_updated_size += final_end - final_start; - } - return real_updated_size; -} - -void __init update_e820(void) -{ - u8 nr_map; - - nr_map = e820.nr_map; - if (sanitize_e820_map(e820.map, &nr_map)) - return; - e820.nr_map = nr_map; - printk(KERN_INFO "modified physical RAM map:\n"); - e820_print_map("modified"); -} - -unsigned long pci_mem_start = 0xaeedbabe; -EXPORT_SYMBOL(pci_mem_start); - -/* - * Search for the biggest gap in the low 32 bits of the e820 - * memory space. We pass this space to PCI to assign MMIO resources - * for hotplug or unconfigured devices in. - * Hopefully the BIOS let enough space left. - */ -__init void e820_setup_gap(void) -{ - unsigned long gapstart, gapsize, round; - unsigned long last; - int i; - int found = 0; - - last = 0x100000000ull; - gapstart = 0x10000000; - gapsize = 0x400000; - i = e820.nr_map; - while (--i >= 0) { - unsigned long long start = e820.map[i].addr; - unsigned long long end = start + e820.map[i].size; - - /* - * Since "last" is at most 4GB, we know we'll - * fit in 32 bits if this condition is true - */ - if (last > end) { - unsigned long gap = last - end; - - if (gap > gapsize) { - gapsize = gap; - gapstart = end; - found = 1; - } - } - if (start < last) - last = start; - } - - if (!found) { - gapstart = (end_pfn << PAGE_SHIFT) + 1024*1024; - printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit " - "address range\n" - KERN_ERR "PCI: Unassigned devices with 32bit resource " - "registers may break!\n"); - } - - /* - * See how much we want to round up: start off with - * rounding to the next 1MB area. - */ - round = 0x100000; - while ((gapsize >> 4) > round) - round += round; - /* Fun with two's complement */ - pci_mem_start = (gapstart + round) & -round; - - printk(KERN_INFO - "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n", - pci_mem_start, gapstart, gapsize); -} - int __init arch_get_ram_range(int slot, u64 *addr, u64 *size) { int i; diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index b54c79c91efd..5faeab69edd9 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -875,7 +875,7 @@ void __init setup_arch(char **cmdline_p) get_smp_config(); #endif - e820_register_memory(); + e820_setup_gap(); e820_mark_nosave_regions(); #ifdef CONFIG_VT diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h index 7004251fc66b..b5b519feba1d 100644 --- a/include/asm-x86/e820.h +++ b/include/asm-x86/e820.h @@ -20,6 +20,20 @@ struct e820map { __u32 nr_map; struct e820entry map[E820MAX]; }; + +extern struct e820map e820; + +extern int e820_any_mapped(u64 start, u64 end, unsigned type); +extern int e820_all_mapped(u64 start, u64 end, unsigned type); +extern void add_memory_region(u64 start, u64 size, int type); +extern void e820_print_map(char *who); +extern int sanitize_e820_map(struct e820entry *biosmap, char *pnr_map); +extern int copy_e820_map(struct e820entry *biosmap, int nr_map); +extern u64 update_memory_range(u64 start, u64 size, unsigned old_type, + unsigned new_type); +extern void update_e820(void); +extern void e820_setup_gap(void); + #endif /* __ASSEMBLY__ */ #define ISA_START_ADDRESS 0xa0000 diff --git a/include/asm-x86/e820_32.h b/include/asm-x86/e820_32.h index af0711b220df..9576b438fbd9 100644 --- a/include/asm-x86/e820_32.h +++ b/include/asm-x86/e820_32.h @@ -21,19 +21,8 @@ extern void setup_memory_map(void); extern void finish_e820_parsing(void); -extern struct e820map e820; -extern void update_e820(void); - -extern int e820_all_mapped(unsigned long start, unsigned long end, - unsigned type); -extern int e820_any_mapped(u64 start, u64 end, unsigned type); extern void propagate_e820_map(void); extern void register_bootmem_low_pages(unsigned long max_low_pfn); -extern void add_memory_region(unsigned long long start, - unsigned long long size, int type); -extern u64 update_memory_range(u64 start, u64 size, unsigned old_type, - unsigned new_type); -extern void e820_register_memory(void); extern void limit_regions(unsigned long long size); extern void init_iomem_resources(struct resource *code_resource, struct resource *data_resource, @@ -47,6 +36,5 @@ static inline void e820_mark_nosave_regions(void) } #endif - #endif/*!__ASSEMBLY__*/ #endif/*__E820_HEADER*/ diff --git a/include/asm-x86/e820_64.h b/include/asm-x86/e820_64.h index 6ae3e2803286..9fac77e01441 100644 --- a/include/asm-x86/e820_64.h +++ b/include/asm-x86/e820_64.h @@ -19,34 +19,22 @@ extern unsigned long find_e820_area(unsigned long start, unsigned long end, extern unsigned long find_e820_area_size(unsigned long start, unsigned long *sizep, unsigned long align); -extern void add_memory_region(unsigned long start, unsigned long size, - int type); -extern u64 update_memory_range(u64 start, u64 size, unsigned old_type, - unsigned new_type); extern void setup_memory_region(void); extern void contig_e820_setup(void); extern unsigned long e820_end_of_ram(void); extern void e820_reserve_resources(void); extern void e820_mark_nosave_regions(void); -extern int e820_any_mapped(unsigned long start, unsigned long end, - unsigned type); -extern int e820_all_mapped(unsigned long start, unsigned long end, - unsigned type); extern int e820_any_non_reserved(unsigned long start, unsigned long end); extern int is_memory_any_valid(unsigned long start, unsigned long end); extern int e820_all_non_reserved(unsigned long start, unsigned long end); extern int is_memory_all_valid(unsigned long start, unsigned long end); extern unsigned long e820_hole_size(unsigned long start, unsigned long end); -extern void e820_setup_gap(void); extern void e820_register_active_regions(int nid, unsigned long start_pfn, unsigned long end_pfn); extern void finish_e820_parsing(void); -extern struct e820map e820; -extern void update_e820(void); - extern void reserve_early(unsigned long start, unsigned long end, char *name); extern void free_early(unsigned long start, unsigned long end); extern void early_res_to_bootmem(unsigned long start, unsigned long end); From 8004dd965b13b01a96def054d420f6df7ff22d53 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 12 May 2008 17:40:39 -0700 Subject: [PATCH 118/821] x86: amd opteron TOM2 mask val fix there is a typo in the mask value, need to remove that extra 0, to avoid 4bit clearing. Signed-off-by: Yinghal Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mtrr/generic.c | 2 +- arch/x86/pci/k8-bus_64.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index a83f5cd78885..509bd3d9eacd 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -233,7 +233,7 @@ void __init get_mtrr_state(void) mtrr_tom2 = high; mtrr_tom2 <<= 32; mtrr_tom2 |= low; - mtrr_tom2 &= 0xffffff8000000ULL; + mtrr_tom2 &= 0xffffff800000ULL; } if (mtrr_show) { int high_width; diff --git a/arch/x86/pci/k8-bus_64.c b/arch/x86/pci/k8-bus_64.c index 5c2799c20e47..bfefdf0f40d4 100644 --- a/arch/x86/pci/k8-bus_64.c +++ b/arch/x86/pci/k8-bus_64.c @@ -384,7 +384,7 @@ static int __init early_fill_mp_bus_info(void) /* need to take out [0, TOM) for RAM*/ address = MSR_K8_TOP_MEM1; rdmsrl(address, val); - end = (val & 0xffffff8000000ULL); + end = (val & 0xffffff800000ULL); printk(KERN_INFO "TOM: %016lx aka %ldM\n", end, end>>20); if (end < (1ULL<<32)) update_range(range, 0, end - 1); @@ -478,7 +478,7 @@ static int __init early_fill_mp_bus_info(void) /* TOP_MEM2 */ address = MSR_K8_TOP_MEM2; rdmsrl(address, val); - end = (val & 0xffffff8000000ULL); + end = (val & 0xffffff800000ULL); printk(KERN_INFO "TOM2: %016lx aka %ldM\n", end, end>>20); update_range(range, 1ULL<<32, end - 1); } From 3f03c54a34fa3da680b3341dd3ba965ef3394bd1 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 9 May 2008 22:40:52 -0700 Subject: [PATCH 119/821] x86: mtrr cleanup for converting continuous to discrete layout - fix #2 disable the noisy print out. also use the one the less spare mtrr reg. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mtrr/main.c | 79 ++++++++++++++++++++------------- 1 file changed, 48 insertions(+), 31 deletions(-) diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index e6c162c379ac..0642201784e0 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -730,6 +730,7 @@ struct var_mtrr_range_state { }; struct var_mtrr_range_state __initdata range_state[RANGE_NUM]; +static int __initdata debug_print; static int __init x86_get_mtrr_mem_range(struct res_range *range, int nr_range, @@ -748,10 +749,12 @@ x86_get_mtrr_mem_range(struct res_range *range, int nr_range, nr_range = add_range_with_merge(range, nr_range, base, base + size - 1); } - printk(KERN_DEBUG "After WB checking\n"); - for (i = 0; i < nr_range; i++) - printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", + if (debug_print) { + printk(KERN_DEBUG "After WB checking\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", range[i].start, range[i].end + 1); + } /* take out UC ranges */ for (i = 0; i < num_var_ranges; i++) { @@ -775,17 +778,21 @@ x86_get_mtrr_mem_range(struct res_range *range, int nr_range, continue; nr_range++; } - printk(KERN_DEBUG "After UC checking\n"); - for (i = 0; i < nr_range; i++) - printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", - range[i].start, range[i].end + 1); + if (debug_print) { + printk(KERN_DEBUG "After UC checking\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", + range[i].start, range[i].end + 1); + } /* sort the ranges */ sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL); - printk(KERN_DEBUG "After sorting\n"); - for (i = 0; i < nr_range; i++) - printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", + if (debug_print) { + printk(KERN_DEBUG "After sorting\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", range[i].start, range[i].end + 1); + } /* clear those is not used */ for (i = nr_range; i < RANGE_NUM; i++) @@ -912,12 +919,13 @@ range_to_mtrr(unsigned int reg, unsigned long range_startk, align = max_align; sizek = 1 << align; - printk(KERN_DEBUG "Setting variable MTRR %d, base: %ldMB, " - "range: %ldMB, type %s\n", - reg, range_startk >> 10, sizek >> 10, - (type == MTRR_TYPE_UNCACHABLE)?"UC": - ((type == MTRR_TYPE_WRBACK)?"WB":"Other") - ); + if (debug_print) + printk(KERN_DEBUG "Setting variable MTRR %d, " + "base: %ldMB, range: %ldMB, type %s\n", + reg, range_startk >> 10, sizek >> 10, + (type == MTRR_TYPE_UNCACHABLE)?"UC": + ((type == MTRR_TYPE_WRBACK)?"WB":"Other") + ); save_var_mtrr(reg++, range_startk, sizek, type); range_startk += sizek; range_sizek -= sizek; @@ -963,7 +971,9 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek, range0_basek = state->range_startk; range0_sizek = ALIGN(state->range_sizek, chunk_sizek); if (range0_sizek == state->range_sizek) { - printk(KERN_DEBUG "rangeX: %016lx - %016lx\n", range0_basek<<10, + if (debug_print) + printk(KERN_DEBUG "rangeX: %016lx - %016lx\n", + range0_basek<<10, (range0_basek + state->range_sizek)<<10); state->reg = range_to_mtrr(state->reg, range0_basek, state->range_sizek, MTRR_TYPE_WRBACK); @@ -980,7 +990,9 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek, } if (range0_sizek) { - printk(KERN_DEBUG "range0: %016lx - %016lx\n", range0_basek<<10, + if (debug_print) + printk(KERN_DEBUG "range0: %016lx - %016lx\n", + range0_basek<<10, (range0_basek + range0_sizek)<<10); state->reg = range_to_mtrr(state->reg, range0_basek, range0_sizek, MTRR_TYPE_WRBACK); @@ -1016,13 +1028,15 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek, second_sizek = 0; } - printk(KERN_DEBUG "range: %016lx - %016lx\n", range_basek<<10, + if (debug_print) + printk(KERN_DEBUG "range: %016lx - %016lx\n", range_basek<<10, (range_basek + range_sizek)<<10); state->reg = range_to_mtrr(state->reg, range_basek, range_sizek, MTRR_TYPE_WRBACK); if (hole_sizek) { - printk(KERN_DEBUG "hole: %016lx - %016lx\n", hole_basek<<10, - (hole_basek + hole_sizek)<<10); + if (debug_print) + printk(KERN_DEBUG "hole: %016lx - %016lx\n", + hole_basek<<10, (hole_basek + hole_sizek)<<10); state->reg = range_to_mtrr(state->reg, hole_basek, hole_sizek, MTRR_TYPE_UNCACHABLE); @@ -1120,7 +1134,6 @@ x86_setup_var_mtrrs(struct res_range *range, int nr_range, /* Write the last range */ if (var_state.range_sizek != 0) range_to_mtrr_with_hole(&var_state, 0, 0); - printk(KERN_DEBUG "DONE variable MTRRs\n"); num_reg = var_state.reg; /* Clear out the extra MTRR's */ @@ -1219,6 +1232,7 @@ static int __init mtrr_cleanup(unsigned address_bits) if (mtrr_chunk_size && mtrr_gran_size) { int num_reg; + debug_print = 1; /* convert ranges to var ranges state */ num_reg = x86_setup_var_mtrrs(range, nr_range, mtrr_chunk_size, mtrr_gran_size); @@ -1242,8 +1256,8 @@ static int __init mtrr_cleanup(unsigned address_bits) result[i].lose_cover_sizek = (range_sums - range_sums_new) << PSHIFT; - printk(KERN_INFO " %sgran_size: %ldM \tchunk_size: %ldM \t", - result[i].bad?" BAD ":"", result[i].gran_sizek >> 10, + printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t", + result[i].bad?"*BAD*":" ", result[i].gran_sizek >> 10, result[i].chunk_sizek >> 10); printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ldM \n", result[i].num_reg, result[i].bad?"-":"", @@ -1254,6 +1268,7 @@ static int __init mtrr_cleanup(unsigned address_bits) } printk(KERN_INFO "invalid mtrr_gran_size or mtrr_chunk_size, " "will find optimal one\n"); + debug_print = 0; memset(result, 0, sizeof(result[0])); } @@ -1265,9 +1280,10 @@ static int __init mtrr_cleanup(unsigned address_bits) chunk_size <<= 1) { int num_reg; - printk(KERN_INFO + if (debug_print) + printk(KERN_INFO "\ngran_size: %lldM chunk_size_size: %lldM\n", - gran_size >> 20, chunk_size >> 20); + gran_size >> 20, chunk_size >> 20); if (i >= NUM_RESULT) continue; @@ -1310,10 +1326,10 @@ static int __init mtrr_cleanup(unsigned address_bits) /* print out all */ for (i = 0; i < NUM_RESULT; i++) { - printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t", + printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t", result[i].bad?"*BAD* ":" ", result[i].gran_sizek >> 10, result[i].chunk_sizek >> 10); - printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ldM \n", + printk(KERN_CONT "num_reg: %d \tlose RAM: %s%ldM\n", result[i].num_reg, result[i].bad?"-":"", result[i].lose_cover_sizek >> 10); } @@ -1322,7 +1338,7 @@ static int __init mtrr_cleanup(unsigned address_bits) if (nr_mtrr_spare_reg >= num_var_ranges) nr_mtrr_spare_reg = num_var_ranges - 1; num_reg_good = -1; - for (i = 1; i < num_var_ranges + 1 - nr_mtrr_spare_reg; i++) { + for (i = num_var_ranges - nr_mtrr_spare_reg; i > 0; i--) { if (!min_loss_pfn[i]) { num_reg_good = i; break; @@ -1344,10 +1360,10 @@ static int __init mtrr_cleanup(unsigned address_bits) if (index_good != -1) { printk(KERN_INFO "Found optimal setting for mtrr clean up\n"); i = index_good; - printk(KERN_INFO "gran_size: %ldM \tchunk_size: %ldM \t", + printk(KERN_INFO "gran_size: %ldM \tchunk_size: %ldM \t", result[i].gran_sizek >> 10, result[i].chunk_sizek >> 10); - printk(KERN_CONT "num_reg: %d \tlose cover RAM: %ldM \n", + printk(KERN_CONT "num_reg: %d \tlose RAM: %ldM\n", result[i].num_reg, result[i].lose_cover_sizek >> 10); /* convert ranges to var ranges state */ @@ -1355,6 +1371,7 @@ static int __init mtrr_cleanup(unsigned address_bits) chunk_size <<= 10; gran_size = result[i].gran_sizek; gran_size <<= 10; + debug_print = 1; x86_setup_var_mtrrs(range, nr_range, chunk_size, gran_size); set_var_mtrr_all(address_bits); return 1; From e3f8ba81fdce852abe36a33eed7b243c4a0acfac Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:04 -0700 Subject: [PATCH 120/821] x86 boot: include missing smp.h header The patch: x86: convert cpu_to_apicid to be a per cpu variable introduced a dependency of ipi.h on smp.h in x86 builds with an allnoconfig. Including smp.h in ipi.h fixes the build error: In file included from arch/x86/kernel/traps_64.c:48: include/asm/ipi.h: In function 'send_IPI_mask_sequence': include/asm/ipi.h:114: error: 'per_cpu__x86_cpu_to_apicid' undeclared (first use in this function) Signed-off-by: Paul Jackson Cc: Mike Travis Signed-off-by: Ingo Molnar --- include/asm-x86/ipi.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/asm-x86/ipi.h b/include/asm-x86/ipi.h index ecc80f341f37..196d63c28aa4 100644 --- a/include/asm-x86/ipi.h +++ b/include/asm-x86/ipi.h @@ -20,6 +20,7 @@ #include #include +#include /* * the following functions deal with sending IPIs between CPUs. From e9197bf0114661195bee35e7795cfc42164d9b2c Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:10 -0700 Subject: [PATCH 121/821] x86 boot: remove some unused extern function declarations Remove three extern declarations for routines that don't exist. Fix a typo in a comment. Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- arch/x86/mm/numa_64.c | 2 +- include/linux/efi.h | 4 ---- 2 files changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index c5066d519e5d..afb07ffb931d 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -233,7 +233,7 @@ void __init setup_node_bootmem(int nodeid, unsigned long start, else bootmap_start = round_up(start, PAGE_SIZE); /* - * SMP_CAHCE_BYTES could be enough, but init_bootmem_node like + * SMP_CACHE_BYTES could be enough, but init_bootmem_node like * to use that to align to PAGE_SIZE */ bootmap = early_node_mem(nodeid, bootmap_start, end, diff --git a/include/linux/efi.h b/include/linux/efi.h index a5f359a7ad0e..807373d467f7 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -287,7 +287,6 @@ efi_guid_unparse(efi_guid_t *guid, char *out) extern void efi_init (void); extern void *efi_get_pal_addr (void); extern void efi_map_pal_code (void); -extern void efi_map_memmap(void); extern void efi_memmap_walk (efi_freemem_callback_t callback, void *arg); extern void efi_gettimeofday (struct timespec *ts); extern void efi_enter_virtual_mode (void); /* switch EFI to virtual mode, if possible */ @@ -295,14 +294,11 @@ extern u64 efi_get_iobase (void); extern u32 efi_mem_type (unsigned long phys_addr); extern u64 efi_mem_attributes (unsigned long phys_addr); extern u64 efi_mem_attribute (unsigned long phys_addr, unsigned long size); -extern int efi_mem_attribute_range (unsigned long phys_addr, unsigned long size, - u64 attr); extern int __init efi_uart_console_only (void); extern void efi_initialize_iomem_resources(struct resource *code_resource, struct resource *data_resource, struct resource *bss_resource); extern unsigned long efi_get_time(void); extern int efi_set_rtc_mmss(unsigned long nowtime); -extern int is_available_memory(efi_memory_desc_t * md); extern struct efi_memory_map memmap; /** From cb5dd7c104c64d7ba8ff4dd3eec3d9b92c378937 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:16 -0700 Subject: [PATCH 122/821] x86 boot: add header comment to dmi.h stating what it is The "dmi.h" file did not state anywhere in the file what "DMI" was. For those who know, it's obvious. For the rest of us, I added a brief opening comment. Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- drivers/firmware/dmi_scan.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index c5e3ed7e903b..455575be3560 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -8,6 +8,11 @@ #include #include +/* + * DMI stands for "Desktop Management Interface". It is part + * of and an antecedent to, SMBIOS, which stands for System + * Management BIOS. See further: http://www.dmtf.org/standards + */ static char dmi_empty_string[] = " "; static const char * __init dmi_string_nosave(const struct dmi_header *dm, u8 s) From c801ed3860fe2f84281d4cae4c3e6ca87e81e890 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:23 -0700 Subject: [PATCH 123/821] x86 boot: simplify pageblock_bits enum declaration The use of #defines with '##' pre-processor concatenation is a useful way to form several symbol names with a common pattern. But when there is just a single name obtained from that #define, it's just obfuscation. Better to just write the plain symbol name, as is. The following patch is a result of my wasting ten minutes looking through the kernel to figure out what 'PB_migrate_end' meant, and forgetting what I came to do, by the time I figured out that the #define PB_range macro defined it. Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- include/linux/pageblock-flags.h | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/include/linux/pageblock-flags.h b/include/linux/pageblock-flags.h index e875905f7b12..e8c06122be36 100644 --- a/include/linux/pageblock-flags.h +++ b/include/linux/pageblock-flags.h @@ -25,13 +25,11 @@ #include -/* Macro to aid the definition of ranges of bits */ -#define PB_range(name, required_bits) \ - name, name ## _end = (name + required_bits) - 1 - /* Bit indices that affect a whole block of pages */ enum pageblock_bits { - PB_range(PB_migrate, 3), /* 3 bits required for migrate types */ + PB_migrate, + PB_migrate_end = PB_migrate + 3 - 1, + /* 3 bits required for migrate types */ NR_PAGEBLOCK_BITS }; From b25e31cec7788ccba5749d10f8f4343fffff4750 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:28 -0700 Subject: [PATCH 124/821] x86 boot: minor code format fixes in e820 and efi routines Standardize a few pointer declarations to not have the extra space after the '*' character. Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820_64.c | 2 +- arch/x86/kernel/efi_64.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 28a14eb65d3d..c10b4aece5e4 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -404,7 +404,7 @@ static void early_panic(char *msg) } /* We're not void only for x86 32-bit compat */ -char * __init machine_specific_memory_setup(void) +char *__init machine_specific_memory_setup(void) { char *who = "BIOS-e820"; /* diff --git a/arch/x86/kernel/efi_64.c b/arch/x86/kernel/efi_64.c index d0060fdcccac..21a7b759687a 100644 --- a/arch/x86/kernel/efi_64.c +++ b/arch/x86/kernel/efi_64.c @@ -103,7 +103,7 @@ void __init efi_reserve_bootmem(void) memmap.nr_map * memmap.desc_size); } -void __iomem * __init efi_ioremap(unsigned long phys_addr, unsigned long size) +void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size) { static unsigned pages_mapped __initdata; unsigned i, pages; From c3965bd15118742d72b4bc1a290d37b3f081eb98 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:34 -0700 Subject: [PATCH 125/821] x86 boot: proper use of ARRAY_SIZE instead of repeated E820MAX constant This patch is motivated by a subsequent patch which will allow for more memory map entries on EFI supported systems than can be passed via the x86 legacy BIOS E820 interface. The legacy interface is limited to E820MAX == 128 memory entries, and that "E820MAX" manifest constant was used as the size for several arrays and loops over those arrays. The primary change in this patch is to change code loop sizes over those arrays from using the constant E820MAX, to using the ARRAY_SIZE() macro evaluated for the array being looped. That way, a subsequent patch can change the size of some of these arrays, without breaking this code. This patch also adds a parameter to the sanitize_e820_map() routine, which had an implicit size for the array passed it of E820MAX entries. This new parameter explicitly passes the size of said array. Once again, this will allow a subsequent patch to change that array size for some calls to sanitize_e820_map() without breaking the code. As part of enhancing the sanitize_e820_map() interface this way, I further combined the unnecessarily distinct x86_32 and x86_64 declarations for this routine into a single, commonly used, declaration. This patch in itself should make no difference to the resulting kernel binary. [ mingo@elte.hu: merged to -tip ] Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- arch/x86/boot/memory.c | 3 ++- arch/x86/kernel/e820.c | 9 +++++---- arch/x86/kernel/e820_64.c | 6 ++++-- arch/x86/mach-default/setup.c | 4 +++- arch/x86/mach-voyager/setup.c | 4 +++- include/asm-x86/e820.h | 3 ++- include/asm-x86/setup.h | 1 - 7 files changed, 19 insertions(+), 11 deletions(-) diff --git a/arch/x86/boot/memory.c b/arch/x86/boot/memory.c index acad32eb4290..53165c97336b 100644 --- a/arch/x86/boot/memory.c +++ b/arch/x86/boot/memory.c @@ -13,6 +13,7 @@ */ #include "boot.h" +#include #define SMAP 0x534d4150 /* ASCII "SMAP" */ @@ -53,7 +54,7 @@ static int detect_memory_e820(void) count++; desc++; - } while (next && count < E820MAX); + } while (next && count < ARRAY_SIZE(boot_params.e820_map)); return boot_params.e820_entries = count; } diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 2cb686f60d0d..2396b9da8027 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -95,7 +95,7 @@ void __init add_memory_region(u64 start, u64 size, int type) { int x = e820.nr_map; - if (x == E820MAX) { + if (x == ARRAY_SIZE(e820.map)) { printk(KERN_ERR "Ooops! Too many entries in the memory map!\n"); return; } @@ -142,7 +142,8 @@ void __init e820_print_map(char *who) * replaces the original e820 map with a new one, removing overlaps. * */ -int __init sanitize_e820_map(struct e820entry *biosmap, char *pnr_map) +int __init sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, + char *pnr_map) { struct change_member { struct e820entry *pbios; /* pointer to original bios entry */ @@ -314,7 +315,7 @@ int __init sanitize_e820_map(struct e820entry *biosmap, char *pnr_map) * no more space left for new * bios entries ? */ - if (++new_bios_entry >= E820MAX) + if (++new_bios_entry >= max_nr_map) break; } if (current_type != 0) { @@ -403,7 +404,7 @@ void __init update_e820(void) u8 nr_map; nr_map = e820.nr_map; - if (sanitize_e820_map(e820.map, &nr_map)) + if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr_map)) return; e820.nr_map = nr_map; printk(KERN_INFO "modified physical RAM map:\n"); diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index c10b4aece5e4..58dc6eee4d4f 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -413,7 +413,9 @@ char *__init machine_specific_memory_setup(void) * Otherwise fake a memory map; one section from 0k->640k, * the next section from 1mb->appropriate_mem_k */ - sanitize_e820_map(boot_params.e820_map, &boot_params.e820_entries); + sanitize_e820_map(boot_params.e820_map, + ARRAY_SIZE(boot_params.e820_map), + &boot_params.e820_entries); if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0) early_panic("Cannot find a valid memory map"); printk(KERN_INFO "BIOS-provided physical RAM map:\n"); @@ -484,7 +486,7 @@ void __init finish_e820_parsing(void) if (userdef) { char nr = e820.nr_map; - if (sanitize_e820_map(e820.map, &nr) < 0) + if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr) < 0) early_panic("Invalid user supplied memory map"); e820.nr_map = nr; diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c index 0c28a071824c..38a856c4fc07 100644 --- a/arch/x86/mach-default/setup.c +++ b/arch/x86/mach-default/setup.c @@ -163,7 +163,9 @@ char * __init machine_specific_memory_setup(void) * Otherwise fake a memory map; one section from 0k->640k, * the next section from 1mb->appropriate_mem_k */ - sanitize_e820_map(boot_params.e820_map, &boot_params.e820_entries); + sanitize_e820_map(boot_params.e820_map, + ARRAY_SIZE(boot_params.e820_map), + &boot_params.e820_entries); if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0) { unsigned long mem_size; diff --git a/arch/x86/mach-voyager/setup.c b/arch/x86/mach-voyager/setup.c index 5ae5466b9eb9..662b5c0a77d6 100644 --- a/arch/x86/mach-voyager/setup.c +++ b/arch/x86/mach-voyager/setup.c @@ -111,7 +111,9 @@ char *__init machine_specific_memory_setup(void) * Otherwise fake a memory map; one section from 0k->640k, * the next section from 1mb->appropriate_mem_k */ - sanitize_e820_map(boot_params.e820_map, &boot_params.e820_entries); + sanitize_e820_map(boot_params.e820_map, + ARRAY_SIZE(boot_params.e820_map), + &boot_params.e820_entries); if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0) { unsigned long mem_size; diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h index b5b519feba1d..65c891d2a4cb 100644 --- a/include/asm-x86/e820.h +++ b/include/asm-x86/e820.h @@ -27,7 +27,8 @@ extern int e820_any_mapped(u64 start, u64 end, unsigned type); extern int e820_all_mapped(u64 start, u64 end, unsigned type); extern void add_memory_region(u64 start, u64 size, int type); extern void e820_print_map(char *who); -extern int sanitize_e820_map(struct e820entry *biosmap, char *pnr_map); +extern int +sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, char *pnr_map); extern int copy_e820_map(struct e820entry *biosmap, int nr_map); extern u64 update_memory_range(u64 start, u64 size, unsigned old_type, unsigned new_type); diff --git a/include/asm-x86/setup.h b/include/asm-x86/setup.h index fa6763af8d26..ffa0f540fc7f 100644 --- a/include/asm-x86/setup.h +++ b/include/asm-x86/setup.h @@ -56,7 +56,6 @@ char * __init machine_specific_memory_setup(void); char *memory_setup(void); int __init copy_e820_map(struct e820entry *biosmap, int nr_map); -int __init sanitize_e820_map(struct e820entry *biosmap, char *pnr_map); void __init add_memory_region(unsigned long long start, unsigned long long size, int type); From 028b785888c523baccdf27af0cdbf1deb92edec0 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:40 -0700 Subject: [PATCH 126/821] x86 boot: extend some internal memory map arrays to handle larger EFI input Extend internal boot time memory tables to allow for up to three entries per node, which may be larger than the 128 E820MAX entries handled by the legacy BIOS E820 interface. The EFI interface, if present, is capable of passing memory map entries for these larger node counts. This patch requires an earlier patch that rewrote code depending on these array sizes from using E820MAX explicitly to size loops, to instead using ARRAY_SIZE() of the applicable array. Another patch following this one will provide the code to pick up additional memory entries passed via the EFI interface from the BIOS and insert them in the following, now enlarged, arrays. Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820.c | 8 ++++---- include/asm-x86/e820.h | 37 ++++++++++++++++++++++++++++++++++++- 2 files changed, 40 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 2396b9da8027..3f7777b255aa 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -149,10 +149,10 @@ int __init sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, struct e820entry *pbios; /* pointer to original bios entry */ unsigned long long addr; /* address for this change point */ }; - static struct change_member change_point_list[2*E820MAX] __initdata; - static struct change_member *change_point[2*E820MAX] __initdata; - static struct e820entry *overlap_list[E820MAX] __initdata; - static struct e820entry new_bios[E820MAX] __initdata; +static struct change_member change_point_list[2*E820_X_MAX] __initdata; +static struct change_member *change_point[2*E820_X_MAX] __initdata; +static struct e820entry *overlap_list[E820_X_MAX] __initdata; +static struct e820entry new_bios[E820_X_MAX] __initdata; struct change_member *change_tmp; unsigned long current_type, last_type; unsigned long long last_addr; diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h index 65c891d2a4cb..ab18457a95c0 100644 --- a/include/asm-x86/e820.h +++ b/include/asm-x86/e820.h @@ -2,6 +2,41 @@ #define __ASM_E820_H #define E820MAP 0x2d0 /* our map */ #define E820MAX 128 /* number of entries in E820MAP */ + +/* + * Legacy E820 BIOS limits us to 128 (E820MAX) nodes due to the + * constrained space in the zeropage. If we have more nodes than + * that, and if we've booted off EFI firmware, then the EFI tables + * passed us from the EFI firmware can list more nodes. Size our + * internal memory map tables to have room for these additional + * nodes, based on up to three entries per node for which the + * kernel was built: MAX_NUMNODES == (1 << CONFIG_NODES_SHIFT), + * plus E820MAX, allowing space for the possible duplicate E820 + * entries that might need room in the same arrays, prior to the + * call to sanitize_e820_map() to remove duplicates. The allowance + * of three memory map entries per node is "enough" entries for + * the initial hardware platform motivating this mechanism to make + * use of additional EFI map entries. Future platforms may want + * to allow more than three entries per node or otherwise refine + * this size. + */ + +/* + * Odd: 'make headers_check' complains about numa.h if I try + * to collapse the next two #ifdef lines to a single line: + * #if defined(__KERNEL__) && defined(CONFIG_EFI) + */ +#ifdef __KERNEL__ +#ifdef CONFIG_EFI +#include +#define E820_X_MAX (E820MAX + 3 * MAX_NUMNODES) +#else /* ! CONFIG_EFI */ +#define E820_X_MAX E820MAX +#endif +#else /* ! __KERNEL__ */ +#define E820_X_MAX E820MAX +#endif + #define E820NR 0x1e8 /* # entries in E820MAP */ #define E820_RAM 1 @@ -18,7 +53,7 @@ struct e820entry { struct e820map { __u32 nr_map; - struct e820entry map[E820MAX]; + struct e820entry map[E820_X_MAX]; }; extern struct e820map e820; From 6e9bcc796b120d17b08dde7ab958b82ddb899889 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:46 -0700 Subject: [PATCH 127/821] x86 boot: change sanitize_e820_map parameter from byte to int to allow bigger memory maps The map size counter passed into, and back out of, sanitize_e820_map(), was an eight bit type (char or u8), as derived from its origins in legacy BIOS E820 structures. This patch changes that type to an 'int', to allow this sanitize routine to also be used on larger maps (larger than the 256 count that fits in a char). The legacy BIOS E820 interface of course does not change; that remains at 8 bits for this count, holding up to E820MAX == 128 entries. But the kernel internals can handle more when those additional memory map entries are passed from the BIOS via EFI interfaces. Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820.c | 5 +++-- arch/x86/kernel/e820_64.c | 7 +++++-- arch/x86/mach-default/setup.c | 5 ++++- arch/x86/mach-voyager/setup.c | 5 ++++- include/asm-x86/e820.h | 2 +- 5 files changed, 17 insertions(+), 7 deletions(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 3f7777b255aa..91abf5b2fb94 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -143,7 +143,7 @@ void __init e820_print_map(char *who) * */ int __init sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, - char *pnr_map) + int *pnr_map) { struct change_member { struct e820entry *pbios; /* pointer to original bios entry */ @@ -204,6 +204,7 @@ static struct e820entry new_bios[E820_X_MAX] __initdata; return -1; old_nr = *pnr_map; + BUG_ON(old_nr > max_nr_map); /* bail out if we find any unreasonable addresses in bios map */ for (i = 0; i < old_nr; i++) @@ -401,7 +402,7 @@ u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, void __init update_e820(void) { - u8 nr_map; + int nr_map; nr_map = e820.nr_map; if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr_map)) diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 58dc6eee4d4f..354fbb221709 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -407,15 +407,18 @@ static void early_panic(char *msg) char *__init machine_specific_memory_setup(void) { char *who = "BIOS-e820"; + int new_nr; /* * Try to copy the BIOS-supplied E820-map. * * Otherwise fake a memory map; one section from 0k->640k, * the next section from 1mb->appropriate_mem_k */ + new_nr = boot_params.e820_entries; sanitize_e820_map(boot_params.e820_map, ARRAY_SIZE(boot_params.e820_map), - &boot_params.e820_entries); + &new_nr); + boot_params.e820_entries = new_nr; if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0) early_panic("Cannot find a valid memory map"); printk(KERN_INFO "BIOS-provided physical RAM map:\n"); @@ -484,7 +487,7 @@ early_param("memmap", parse_memmap_opt); void __init finish_e820_parsing(void) { if (userdef) { - char nr = e820.nr_map; + int nr = e820.nr_map; if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr) < 0) early_panic("Invalid user supplied memory map"); diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c index 38a856c4fc07..56b4c39cb7fa 100644 --- a/arch/x86/mach-default/setup.c +++ b/arch/x86/mach-default/setup.c @@ -153,6 +153,7 @@ late_initcall(print_ipi_mode); char * __init machine_specific_memory_setup(void) { char *who; + int new_nr; who = "BIOS-e820"; @@ -163,9 +164,11 @@ char * __init machine_specific_memory_setup(void) * Otherwise fake a memory map; one section from 0k->640k, * the next section from 1mb->appropriate_mem_k */ + new_nr = boot_params.e820_entries; sanitize_e820_map(boot_params.e820_map, ARRAY_SIZE(boot_params.e820_map), - &boot_params.e820_entries); + &new_nr); + boot_params.e820_entries = new_nr; if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0) { unsigned long mem_size; diff --git a/arch/x86/mach-voyager/setup.c b/arch/x86/mach-voyager/setup.c index 662b5c0a77d6..f4aca9fa9546 100644 --- a/arch/x86/mach-voyager/setup.c +++ b/arch/x86/mach-voyager/setup.c @@ -62,6 +62,7 @@ void __init time_init_hook(void) char *__init machine_specific_memory_setup(void) { char *who; + int new_nr; who = "NOT VOYAGER"; @@ -111,9 +112,11 @@ char *__init machine_specific_memory_setup(void) * Otherwise fake a memory map; one section from 0k->640k, * the next section from 1mb->appropriate_mem_k */ + new_nr = boot_params.e820_entries; sanitize_e820_map(boot_params.e820_map, ARRAY_SIZE(boot_params.e820_map), - &boot_params.e820_entries); + &new_nr); + boot_params.e820_entries = new_nr; if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0) { unsigned long mem_size; diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h index ab18457a95c0..1eb13b881437 100644 --- a/include/asm-x86/e820.h +++ b/include/asm-x86/e820.h @@ -63,7 +63,7 @@ extern int e820_all_mapped(u64 start, u64 end, unsigned type); extern void add_memory_region(u64 start, u64 size, int type); extern void e820_print_map(char *who); extern int -sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, char *pnr_map); +sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, int *pnr_map); extern int copy_e820_map(struct e820entry *biosmap, int nr_map); extern u64 update_memory_range(u64 start, u64 size, unsigned old_type, unsigned new_type); From 5b7eb2e9ef4e467a1248537b47a63bab265be3cc Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:52 -0700 Subject: [PATCH 128/821] x86 boot: longer comment explaining sanitize_e820_map routine Elaborate on the comment for sanitize_e820_map(), epxlaining more what it does, what it inputs, and what it returns. Rearrange the placement of this comment to fit kernel conventions, before the routine's code rather than buried inside it. Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820.c | 94 +++++++++++++++++++++++++----------------- 1 file changed, 56 insertions(+), 38 deletions(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 91abf5b2fb94..41c480ae47df 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -139,9 +139,64 @@ void __init e820_print_map(char *who) * Sanitize the BIOS e820 map. * * Some e820 responses include overlapping entries. The following - * replaces the original e820 map with a new one, removing overlaps. + * replaces the original e820 map with a new one, removing overlaps, + * and resolving conflicting memory types in favor of highest + * numbered type. * + * The input parameter biosmap points to an array of 'struct + * e820entry' which on entry has elements in the range [0, *pnr_map) + * valid, and which has space for up to max_nr_map entries. + * On return, the resulting sanitized e820 map entries will be in + * overwritten in the same location, starting at biosmap. + * + * The integer pointed to by pnr_map must be valid on entry (the + * current number of valid entries located at biosmap) and will + * be updated on return, with the new number of valid entries + * (something no more than max_nr_map.) + * + * The return value from sanitize_e820_map() is zero if it + * successfully 'sanitized' the map entries passed in, and is -1 + * if it did nothing, which can happen if either of (1) it was + * only passed one map entry, or (2) any of the input map entries + * were invalid (start + size < start, meaning that the size was + * so big the described memory range wrapped around through zero.) + * + * Visually we're performing the following + * (1,2,3,4 = memory types)... + * + * Sample memory map (w/overlaps): + * ____22__________________ + * ______________________4_ + * ____1111________________ + * _44_____________________ + * 11111111________________ + * ____________________33__ + * ___________44___________ + * __________33333_________ + * ______________22________ + * ___________________2222_ + * _________111111111______ + * _____________________11_ + * _________________4______ + * + * Sanitized equivalent (no overlap): + * 1_______________________ + * _44_____________________ + * ___1____________________ + * ____22__________________ + * ______11________________ + * _________1______________ + * __________3_____________ + * ___________44___________ + * _____________33_________ + * _______________2________ + * ________________1_______ + * _________________4______ + * ___________________2____ + * ____________________33__ + * ______________________4_ */ + int __init sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, int *pnr_map) { @@ -162,43 +217,6 @@ static struct e820entry new_bios[E820_X_MAX] __initdata; int old_nr, new_nr, chg_nr; int i; - /* - Visually we're performing the following - (1,2,3,4 = memory types)... - - Sample memory map (w/overlaps): - ____22__________________ - ______________________4_ - ____1111________________ - _44_____________________ - 11111111________________ - ____________________33__ - ___________44___________ - __________33333_________ - ______________22________ - ___________________2222_ - _________111111111______ - _____________________11_ - _________________4______ - - Sanitized equivalent (no overlap): - 1_______________________ - _44_____________________ - ___1____________________ - ____22__________________ - ______11________________ - _________1______________ - __________3_____________ - ___________44___________ - _____________33_________ - _______________2________ - ________________1_______ - _________________4______ - ___________________2____ - ____________________33__ - ______________________4_ - */ - /* if there's only one memory region, don't bother */ if (*pnr_map < 2) return -1; From 69c9189320c46b14e5ae3ad4b3a0d35cc63cba20 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:58 -0700 Subject: [PATCH 129/821] x86 boot: add code to add BIOS provided EFI memory entries to kernel Add to the kernels boot memory map 'memmap' entries found in the EFI memory descriptors passed in from the BIOS. On EFI systems, up to E820MAX == 128 memory map entries can be passed via the legacy E820 interface (limited by the size of the 'zeropage'). These entries can be duplicated in the EFI descriptors also passed from the BIOS, and possibly more entries passed by the EFI interface, which does not have the E820MAX limit on number of memory map entries. This code doesn't worry about the likely duplicate, overlapping or (unlikely) conflicting entries between the EFI map and the E820 map. It just dumps all the EFI entries into the memmap[] array (which already has the E820 entries) and lets the existing routine sanitize_e820_map() sort the mess out. Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- arch/x86/kernel/efi.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c index 77d424cf68b3..4a1a26d5931f 100644 --- a/arch/x86/kernel/efi.c +++ b/arch/x86/kernel/efi.c @@ -213,6 +213,31 @@ unsigned long efi_get_time(void) eft.minute, eft.second); } +/* + * Tell the kernel about the EFI memory map. This might include + * more than the max 128 entries that can fit in the e820 legacy + * (zeropage) memory map. + */ + +static void __init add_efi_memmap(void) +{ + void *p; + + for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { + efi_memory_desc_t *md = p; + unsigned long long start = md->phys_addr; + unsigned long long size = md->num_pages << EFI_PAGE_SHIFT; + int e820_type; + + if (md->attribute & EFI_MEMORY_WB) + e820_type = E820_RAM; + else + e820_type = E820_RESERVED; + add_memory_region(start, size, e820_type); + } + sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); +} + #if EFI_DEBUG static void __init print_efi_memmap(void) { @@ -370,6 +395,7 @@ void __init efi_init(void) if (memmap.desc_size != sizeof(efi_memory_desc_t)) printk(KERN_WARNING "Kernel-defined memdesc" "doesn't match the one from EFI!\n"); + add_efi_memmap(); /* Setup for EFI runtime service */ reboot_type = BOOT_EFI; From a4c81cf684350797939416c99effb9d3ae46bca6 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 18 May 2008 01:18:57 -0700 Subject: [PATCH 130/821] x86: extend e820 ealy_res support 32bit move early_res related from e820_64.c to e820.c make edba detection to be done in head32.c remove smp_alloc_memory, because we have fixed trampoline address now. Signed-off-by: Yinghai Lu arch/x86/kernel/e820.c | 214 ++++++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_64.c | 196 -------------------------------- arch/x86/kernel/head32.c | 76 ++++++++++++ arch/x86/kernel/setup_32.c | 109 +++--------------- arch/x86/kernel/smpboot.c | 17 -- arch/x86/kernel/trampoline.c | 2 arch/x86/mach-voyager/voyager_smp.c | 9 - include/asm-x86/e820.h | 6 + include/asm-x86/e820_64.h | 9 - include/asm-x86/smp.h | 1 arch/x86/kernel/e820.c | 214 ++++++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_64.c | 196 -------------------------------- arch/x86/kernel/head32.c | 76 ++++++++++++ arch/x86/kernel/setup_32.c | 109 +++--------------- arch/x86/kernel/smpboot.c | 17 -- arch/x86/kernel/trampoline.c | 2 arch/x86/mach-voyager/voyager_smp.c | 9 - include/asm-x86/e820.h | 6 + include/asm-x86/e820_64.h | 9 - include/asm-x86/smp.h | 1 arch/x86/kernel/e820.c | 214 ++++++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_64.c | 196 -------------------------------- arch/x86/kernel/head32.c | 76 ++++++++++++ arch/x86/kernel/setup_32.c | 109 +++--------------- arch/x86/kernel/smpboot.c | 17 -- arch/x86/kernel/trampoline.c | 2 arch/x86/mach-voyager/voyager_smp.c | 9 - include/asm-x86/e820.h | 6 + include/asm-x86/e820_64.h | 9 - include/asm-x86/smp.h | 1 10 files changed, 320 insertions(+), 319 deletions(-) Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820.c | 214 ++++++++++++++++++++++++++++ arch/x86/kernel/e820_64.c | 196 ------------------------- arch/x86/kernel/head32.c | 76 ++++++++++ arch/x86/kernel/setup_32.c | 109 +++----------- arch/x86/kernel/smpboot.c | 17 --- arch/x86/kernel/trampoline.c | 2 +- arch/x86/mach-voyager/voyager_smp.c | 9 -- include/asm-x86/e820.h | 6 + include/asm-x86/e820_64.h | 9 -- include/asm-x86/smp.h | 1 - 10 files changed, 320 insertions(+), 319 deletions(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 41c480ae47df..35da8cdbe5e6 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -22,7 +22,9 @@ #include #include #include +#include #include +#include struct e820map e820; @@ -493,3 +495,215 @@ __init void e820_setup_gap(void) pci_mem_start, gapstart, gapsize); } + +/* + * Early reserved memory areas. + */ +#define MAX_EARLY_RES 20 + +struct early_res { + u64 start, end; + char name[16]; +}; +static struct early_res early_res[MAX_EARLY_RES] __initdata = { + { 0, PAGE_SIZE, "BIOS data page" }, /* BIOS data page */ +#if defined(CONFIG_X86_64) && defined(CONFIG_X86_TRAMPOLINE) + { TRAMPOLINE_BASE, TRAMPOLINE_BASE + 2 * PAGE_SIZE, "TRAMPOLINE" }, +#endif +#if defined(CONFIG_X86_32) && defined(CONFIG_SMP) + /* + * But first pinch a few for the stack/trampoline stuff + * FIXME: Don't need the extra page at 4K, but need to fix + * trampoline before removing it. (see the GDT stuff) + */ + { PAGE_SIZE, PAGE_SIZE + PAGE_SIZE, "EX TRAMPOLINE" }, + /* + * Has to be in very low memory so we can execute + * real-mode AP code. + */ + { TRAMPOLINE_BASE, TRAMPOLINE_BASE + PAGE_SIZE, "TRAMPOLINE" }, +#endif + {} +}; + +void __init reserve_early(u64 start, u64 end, char *name) +{ + int i; + struct early_res *r; + for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { + r = &early_res[i]; + if (end > r->start && start < r->end) + panic("Overlapping early reservations %llx-%llx %s to %llx-%llx %s\n", + start, end - 1, name?name:"", r->start, + r->end - 1, r->name); + } + if (i >= MAX_EARLY_RES) + panic("Too many early reservations"); + r = &early_res[i]; + r->start = start; + r->end = end; + if (name) + strncpy(r->name, name, sizeof(r->name) - 1); +} + +void __init free_early(u64 start, u64 end) +{ + struct early_res *r; + int i, j; + + for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { + r = &early_res[i]; + if (start == r->start && end == r->end) + break; + } + if (i >= MAX_EARLY_RES || !early_res[i].end) + panic("free_early on not reserved area: %llx-%llx!", + start, end); + + for (j = i + 1; j < MAX_EARLY_RES && early_res[j].end; j++) + ; + + memmove(&early_res[i], &early_res[i + 1], + (j - 1 - i) * sizeof(struct early_res)); + + early_res[j - 1].end = 0; +} + +void __init early_res_to_bootmem(u64 start, u64 end) +{ + int i; + u64 final_start, final_end; + for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { + struct early_res *r = &early_res[i]; + final_start = max(start, r->start); + final_end = min(end, r->end); + if (final_start >= final_end) + continue; + printk(KERN_INFO " early res: %d [%llx-%llx] %s\n", i, + final_start, final_end - 1, r->name); +#ifdef CONFIG_X86_64 + reserve_bootmem_generic(final_start, final_end - final_start); +#else + reserve_bootmem(final_start, final_end - final_start, + BOOTMEM_DEFAULT); +#endif + } +} + +/* Check for already reserved areas */ +static inline int __init bad_addr(u64 *addrp, u64 size, u64 align) +{ + int i; + u64 addr = *addrp, last; + int changed = 0; +again: + last = addr + size; + for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { + struct early_res *r = &early_res[i]; + if (last >= r->start && addr < r->end) { + *addrp = addr = round_up(r->end, align); + changed = 1; + goto again; + } + } + return changed; +} + +/* Check for already reserved areas */ +static inline int __init bad_addr_size(u64 *addrp, u64 *sizep, u64 align) +{ + int i; + u64 addr = *addrp, last; + u64 size = *sizep; + int changed = 0; +again: + last = addr + size; + for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { + struct early_res *r = &early_res[i]; + if (last > r->start && addr < r->start) { + size = r->start - addr; + changed = 1; + goto again; + } + if (last > r->end && addr < r->end) { + addr = round_up(r->end, align); + size = last - addr; + changed = 1; + goto again; + } + if (last <= r->end && addr >= r->start) { + (*sizep)++; + return 0; + } + } + if (changed) { + *addrp = addr; + *sizep = size; + } + return changed; +} + +/* + * Find a free area with specified alignment in a specific range. + */ +u64 __init find_e820_area(u64 start, u64 end, u64 size, u64 align) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + u64 addr, last; + u64 ei_last; + + if (ei->type != E820_RAM) + continue; + addr = round_up(ei->addr, align); + ei_last = ei->addr + ei->size; + if (addr < start) + addr = round_up(start, align); + if (addr >= ei_last) + continue; + while (bad_addr(&addr, size, align) && addr+size <= ei_last) + ; + last = addr + size; + if (last > ei_last) + continue; + if (last > end) + continue; + return addr; + } + return -1ULL; +} + +/* + * Find next free range after *start + */ +u64 __init find_e820_area_size(u64 start, u64 *sizep, u64 align) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + u64 addr, last; + u64 ei_last; + + if (ei->type != E820_RAM) + continue; + addr = round_up(ei->addr, align); + ei_last = ei->addr + ei->size; + if (addr < start) + addr = round_up(start, align); + if (addr >= ei_last) + continue; + *sizep = ei_last - addr; + while (bad_addr_size(&addr, sizep, align) && + addr + *sizep <= ei_last) + ; + last = addr + *sizep; + if (last > ei_last) + continue; + return addr; + } + return -1UL; + +} diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 354fbb221709..07941b554519 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -46,202 +46,6 @@ unsigned long max_pfn_mapped; */ static unsigned long __initdata end_user_pfn = MAXMEM>>PAGE_SHIFT; -/* - * Early reserved memory areas. - */ -#define MAX_EARLY_RES 20 - -struct early_res { - unsigned long start, end; - char name[16]; -}; -static struct early_res early_res[MAX_EARLY_RES] __initdata = { - { 0, PAGE_SIZE, "BIOS data page" }, /* BIOS data page */ -#ifdef CONFIG_X86_TRAMPOLINE - { TRAMPOLINE_BASE, TRAMPOLINE_BASE + 2 * PAGE_SIZE, "TRAMPOLINE" }, -#endif - {} -}; - -void __init reserve_early(unsigned long start, unsigned long end, char *name) -{ - int i; - struct early_res *r; - for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { - r = &early_res[i]; - if (end > r->start && start < r->end) - panic("Overlapping early reservations %lx-%lx %s to %lx-%lx %s\n", - start, end - 1, name?name:"", r->start, r->end - 1, r->name); - } - if (i >= MAX_EARLY_RES) - panic("Too many early reservations"); - r = &early_res[i]; - r->start = start; - r->end = end; - if (name) - strncpy(r->name, name, sizeof(r->name) - 1); -} - -void __init free_early(unsigned long start, unsigned long end) -{ - struct early_res *r; - int i, j; - - for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { - r = &early_res[i]; - if (start == r->start && end == r->end) - break; - } - if (i >= MAX_EARLY_RES || !early_res[i].end) - panic("free_early on not reserved area: %lx-%lx!", start, end); - - for (j = i + 1; j < MAX_EARLY_RES && early_res[j].end; j++) - ; - - memmove(&early_res[i], &early_res[i + 1], - (j - 1 - i) * sizeof(struct early_res)); - - early_res[j - 1].end = 0; -} - -void __init early_res_to_bootmem(unsigned long start, unsigned long end) -{ - int i; - unsigned long final_start, final_end; - for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { - struct early_res *r = &early_res[i]; - final_start = max(start, r->start); - final_end = min(end, r->end); - if (final_start >= final_end) - continue; - printk(KERN_INFO " early res: %d [%lx-%lx] %s\n", i, - final_start, final_end - 1, r->name); - reserve_bootmem_generic(final_start, final_end - final_start); - } -} - -/* Check for already reserved areas */ -static inline int __init -bad_addr(unsigned long *addrp, unsigned long size, unsigned long align) -{ - int i; - unsigned long addr = *addrp, last; - int changed = 0; -again: - last = addr + size; - for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { - struct early_res *r = &early_res[i]; - if (last >= r->start && addr < r->end) { - *addrp = addr = round_up(r->end, align); - changed = 1; - goto again; - } - } - return changed; -} - -/* Check for already reserved areas */ -static inline int __init -bad_addr_size(unsigned long *addrp, unsigned long *sizep, unsigned long align) -{ - int i; - unsigned long addr = *addrp, last; - unsigned long size = *sizep; - int changed = 0; -again: - last = addr + size; - for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { - struct early_res *r = &early_res[i]; - if (last > r->start && addr < r->start) { - size = r->start - addr; - changed = 1; - goto again; - } - if (last > r->end && addr < r->end) { - addr = round_up(r->end, align); - size = last - addr; - changed = 1; - goto again; - } - if (last <= r->end && addr >= r->start) { - (*sizep)++; - return 0; - } - } - if (changed) { - *addrp = addr; - *sizep = size; - } - return changed; -} - -/* - * Find a free area with specified alignment in a specific range. - */ -unsigned long __init find_e820_area(unsigned long start, unsigned long end, - unsigned long size, unsigned long align) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - unsigned long addr, last; - unsigned long ei_last; - - if (ei->type != E820_RAM) - continue; - addr = round_up(ei->addr, align); - ei_last = ei->addr + ei->size; - if (addr < start) - addr = round_up(start, align); - if (addr >= ei_last) - continue; - while (bad_addr(&addr, size, align) && addr+size <= ei_last) - ; - last = addr + size; - if (last > ei_last) - continue; - if (last > end) - continue; - return addr; - } - return -1UL; -} - -/* - * Find next free range after *start - */ -unsigned long __init find_e820_area_size(unsigned long start, - unsigned long *sizep, - unsigned long align) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - unsigned long addr, last; - unsigned long ei_last; - - if (ei->type != E820_RAM) - continue; - addr = round_up(ei->addr, align); - ei_last = ei->addr + ei->size; - if (addr < start) - addr = round_up(start, align); - if (addr >= ei_last) - continue; - *sizep = ei_last - addr; - while (bad_addr_size(&addr, sizep, align) && - addr + *sizep <= ei_last) - ; - last = addr + *sizep; - if (last > ei_last) - continue; - return addr; - } - return -1UL; - -} /* * Find the highest page frame number we have available */ diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index 3db059058927..c216d3c2a991 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -8,7 +8,83 @@ #include #include +#include +#include +#include +#include + +#define BIOS_LOWMEM_KILOBYTES 0x413 + +/* + * The BIOS places the EBDA/XBDA at the top of conventional + * memory, and usually decreases the reported amount of + * conventional memory (int 0x12) too. This also contains a + * workaround for Dell systems that neglect to reserve EBDA. + * The same workaround also avoids a problem with the AMD768MPX + * chipset: reserve a page before VGA to prevent PCI prefetch + * into it (errata #56). Usually the page is reserved anyways, + * unless you have no PS/2 mouse plugged in. + */ +static void __init reserve_ebda_region(void) +{ + unsigned int lowmem, ebda_addr; + + /* To determine the position of the EBDA and the */ + /* end of conventional memory, we need to look at */ + /* the BIOS data area. In a paravirtual environment */ + /* that area is absent. We'll just have to assume */ + /* that the paravirt case can handle memory setup */ + /* correctly, without our help. */ + if (paravirt_enabled()) + return; + + /* end of low (conventional) memory */ + lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES); + lowmem <<= 10; + + /* start of EBDA area */ + ebda_addr = get_bios_ebda(); + + /* Fixup: bios puts an EBDA in the top 64K segment */ + /* of conventional memory, but does not adjust lowmem. */ + if ((lowmem - ebda_addr) <= 0x10000) + lowmem = ebda_addr; + + /* Fixup: bios does not report an EBDA at all. */ + /* Some old Dells seem to need 4k anyhow (bugzilla 2990) */ + if ((ebda_addr == 0) && (lowmem >= 0x9f000)) + lowmem = 0x9f000; + + /* Paranoia: should never happen, but... */ + if ((lowmem == 0) || (lowmem >= 0x100000)) + lowmem = 0x9f000; + + /* reserve all memory between lowmem and the 1MB mark */ + reserve_early(lowmem, 0x100000, "BIOS reserved"); +} + void __init i386_start_kernel(void) { + reserve_early(__pa_symbol(&_text), __pa_symbol(&_end), "TEXT DATA BSS"); + +#ifdef CONFIG_BLK_DEV_INITRD + /* Reserve INITRD */ + if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) { + u64 ramdisk_image = boot_params.hdr.ramdisk_image; + u64 ramdisk_size = boot_params.hdr.ramdisk_size; + u64 ramdisk_end = ramdisk_image + ramdisk_size; + reserve_early(ramdisk_image, ramdisk_end, "RAMDISK"); + } +#endif + reserve_early(__pa_symbol(&_end), init_pg_tables_end, "INIT_PG_TABLE"); + + reserve_ebda_region(); + + /* + * At this point everything still needed from the boot loader + * or BIOS or kernel text should be early reserved or marked not + * RAM in e820. All other memory is free game. + */ + start_kernel(); } diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 5faeab69edd9..fed482c62450 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -359,56 +359,6 @@ unsigned long __init find_max_low_pfn(void) return max_low_pfn; } -#define BIOS_LOWMEM_KILOBYTES 0x413 - -/* - * The BIOS places the EBDA/XBDA at the top of conventional - * memory, and usually decreases the reported amount of - * conventional memory (int 0x12) too. This also contains a - * workaround for Dell systems that neglect to reserve EBDA. - * The same workaround also avoids a problem with the AMD768MPX - * chipset: reserve a page before VGA to prevent PCI prefetch - * into it (errata #56). Usually the page is reserved anyways, - * unless you have no PS/2 mouse plugged in. - */ -static void __init reserve_ebda_region(void) -{ - unsigned int lowmem, ebda_addr; - - /* To determine the position of the EBDA and the */ - /* end of conventional memory, we need to look at */ - /* the BIOS data area. In a paravirtual environment */ - /* that area is absent. We'll just have to assume */ - /* that the paravirt case can handle memory setup */ - /* correctly, without our help. */ - if (paravirt_enabled()) - return; - - /* end of low (conventional) memory */ - lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES); - lowmem <<= 10; - - /* start of EBDA area */ - ebda_addr = get_bios_ebda(); - - /* Fixup: bios puts an EBDA in the top 64K segment */ - /* of conventional memory, but does not adjust lowmem. */ - if ((lowmem - ebda_addr) <= 0x10000) - lowmem = ebda_addr; - - /* Fixup: bios does not report an EBDA at all. */ - /* Some old Dells seem to need 4k anyhow (bugzilla 2990) */ - if ((ebda_addr == 0) && (lowmem >= 0x9f000)) - lowmem = 0x9f000; - - /* Paranoia: should never happen, but... */ - if ((lowmem == 0) || (lowmem >= 0x100000)) - lowmem = 0x9f000; - - /* reserve all memory between lowmem and the 1MB mark */ - reserve_bootmem(lowmem, 0x100000 - lowmem, BOOTMEM_DEFAULT); -} - #ifndef CONFIG_NEED_MULTIPLE_NODES static void __init setup_bootmem_allocator(void); static unsigned long __init setup_memory(void) @@ -522,25 +472,32 @@ static void __init reserve_initrd(void) unsigned long end_of_lowmem = max_low_pfn << PAGE_SHIFT; unsigned long ramdisk_here; - initrd_start = 0; - if (!boot_params.hdr.type_of_loader || !ramdisk_image || !ramdisk_size) return; /* No initrd provided by bootloader */ + initrd_start = 0; + if (ramdisk_end < ramdisk_image) { + free_bootmem(ramdisk_image, ramdisk_size); printk(KERN_ERR "initrd wraps around end of memory, " "disabling initrd\n"); return; } if (ramdisk_size >= end_of_lowmem/2) { + free_bootmem(ramdisk_image, ramdisk_size); printk(KERN_ERR "initrd too large to handle, " "disabling initrd\n"); return; } + if (ramdisk_end <= end_of_lowmem) { /* All in lowmem, easy case */ - reserve_bootmem(ramdisk_image, ramdisk_size, BOOTMEM_DEFAULT); + /* + * don't need to reserve again, already reserved early + * in i386_start_kernel, and early_res_to_bootmem + * convert that to reserved in bootmem + */ initrd_start = ramdisk_image + PAGE_OFFSET; initrd_end = initrd_start+ramdisk_size; return; @@ -582,6 +539,8 @@ static void __init relocate_initrd(void) p = (char *)__va(ramdisk_image); memcpy(q, p, clen); q += clen; + /* need to free these low pages...*/ + free_bootmem(ramdisk_image, clen); ramdisk_image += clen; ramdisk_size -= clen; } @@ -600,47 +559,28 @@ static void __init relocate_initrd(void) ramdisk_image += clen; ramdisk_size -= clen; } + /* high pages is not converted by early_res_to_bootmem */ } #endif /* CONFIG_BLK_DEV_INITRD */ void __init setup_bootmem_allocator(void) { - unsigned long bootmap_size; + unsigned long bootmap_size, bootmap; /* * Initialize the boot-time allocator (with low memory only): */ - bootmap_size = init_bootmem(min_low_pfn, max_low_pfn); - + bootmap_size = bootmem_bootmap_pages(max_low_pfn)<> PAGE_SHIFT, max_low_pfn); register_bootmem_low_pages(max_low_pfn); + early_res_to_bootmem(0, max_low_pfn<llc_shared_map; } -#ifdef CONFIG_X86_32 -/* - * We are called very early to get the low memory for the - * SMP bootup trampoline page. - */ -void __init smp_alloc_memory(void) -{ - trampoline_base = alloc_bootmem_low_pages(PAGE_SIZE); - /* - * Has to be in very low memory so we can execute - * real-mode AP code. - */ - if (__pa(trampoline_base) >= 0x9F000) - BUG(); -} -#endif - static void impress_friends(void) { int cpu; diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c index abbf199adebb..1106fac6024d 100644 --- a/arch/x86/kernel/trampoline.c +++ b/arch/x86/kernel/trampoline.c @@ -2,7 +2,7 @@ #include -/* ready for x86_64, no harm for x86, since it will overwrite after alloc */ +/* ready for x86_64 and x86 */ unsigned char *trampoline_base = __va(TRAMPOLINE_BASE); /* diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c index 8acbf0cdf1a5..7bbebbfe8c4e 100644 --- a/arch/x86/mach-voyager/voyager_smp.c +++ b/arch/x86/mach-voyager/voyager_smp.c @@ -1137,15 +1137,6 @@ void flush_tlb_all(void) on_each_cpu(do_flush_tlb_all, 0, 1, 1); } -/* used to set up the trampoline for other CPUs when the memory manager - * is sorted out */ -void __init smp_alloc_memory(void) -{ - trampoline_base = alloc_bootmem_low_pages(PAGE_SIZE); - if (__pa(trampoline_base) >= 0x93000) - BUG(); -} - /* send a reschedule CPI to one CPU by physical CPU number*/ static void voyager_smp_send_reschedule(int cpu) { diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h index 1eb13b881437..5a58e2bb1d78 100644 --- a/include/asm-x86/e820.h +++ b/include/asm-x86/e820.h @@ -70,6 +70,12 @@ extern u64 update_memory_range(u64 start, u64 size, unsigned old_type, extern void update_e820(void); extern void e820_setup_gap(void); +extern u64 find_e820_area(u64 start, u64 end, u64 size, u64 align); +extern u64 find_e820_area_size(u64 start, u64 *sizep, u64 align); +extern void reserve_early(u64 start, u64 end, char *name); +extern void free_early(u64 start, u64 end); +extern void early_res_to_bootmem(u64 start, u64 end); + #endif /* __ASSEMBLY__ */ #define ISA_START_ADDRESS 0xa0000 diff --git a/include/asm-x86/e820_64.h b/include/asm-x86/e820_64.h index 9fac77e01441..37f176a02bc6 100644 --- a/include/asm-x86/e820_64.h +++ b/include/asm-x86/e820_64.h @@ -14,11 +14,6 @@ #include #ifndef __ASSEMBLY__ -extern unsigned long find_e820_area(unsigned long start, unsigned long end, - unsigned long size, unsigned long align); -extern unsigned long find_e820_area_size(unsigned long start, - unsigned long *sizep, - unsigned long align); extern void setup_memory_region(void); extern void contig_e820_setup(void); extern unsigned long e820_end_of_ram(void); @@ -35,10 +30,6 @@ extern void e820_register_active_regions(int nid, unsigned long start_pfn, extern void finish_e820_parsing(void); -extern void reserve_early(unsigned long start, unsigned long end, char *name); -extern void free_early(unsigned long start, unsigned long end); -extern void early_res_to_bootmem(unsigned long start, unsigned long end); - #endif/*!__ASSEMBLY__*/ #endif/*__E820_HEADER*/ diff --git a/include/asm-x86/smp.h b/include/asm-x86/smp.h index 1ebaa5cd3112..514e52b95cef 100644 --- a/include/asm-x86/smp.h +++ b/include/asm-x86/smp.h @@ -201,7 +201,6 @@ extern void cpu_exit_clear(void); extern void cpu_uninit(void); #endif -extern void smp_alloc_memory(void); extern void lock_ipi_call_lock(void); extern void unlock_ipi_call_lock(void); #endif /* __ASSEMBLY__ */ From ba5b14cc0311af6ed20dc25aa98a1d5ea6f2e6c0 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 21 May 2008 18:40:18 -0700 Subject: [PATCH 131/821] x86: extend e820 ealy_res support 32bit - fix use find_e820_area to find addess for new RAMDISK, instead of using ram blindly also print out low ram and bootmap info Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/kernel/setup_32.c | 55 +++++++++++++++++++++----------------- 1 file changed, 31 insertions(+), 24 deletions(-) diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index fed482c62450..3c451d143eba 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -466,11 +466,11 @@ static bool do_relocate_initrd = false; static void __init reserve_initrd(void) { - unsigned long ramdisk_image = boot_params.hdr.ramdisk_image; - unsigned long ramdisk_size = boot_params.hdr.ramdisk_size; - unsigned long ramdisk_end = ramdisk_image + ramdisk_size; - unsigned long end_of_lowmem = max_low_pfn << PAGE_SHIFT; - unsigned long ramdisk_here; + u64 ramdisk_image = boot_params.hdr.ramdisk_image; + u64 ramdisk_size = boot_params.hdr.ramdisk_size; + u64 ramdisk_end = ramdisk_image + ramdisk_size; + u64 end_of_lowmem = max_low_pfn << PAGE_SHIFT; + u64 ramdisk_here; if (!boot_params.hdr.type_of_loader || !ramdisk_image || !ramdisk_size) @@ -478,14 +478,8 @@ static void __init reserve_initrd(void) initrd_start = 0; - if (ramdisk_end < ramdisk_image) { - free_bootmem(ramdisk_image, ramdisk_size); - printk(KERN_ERR "initrd wraps around end of memory, " - "disabling initrd\n"); - return; - } if (ramdisk_size >= end_of_lowmem/2) { - free_bootmem(ramdisk_image, ramdisk_size); + free_early(ramdisk_image, ramdisk_image + ramdisk_size - 1); printk(KERN_ERR "initrd too large to handle, " "disabling initrd\n"); return; @@ -495,8 +489,7 @@ static void __init reserve_initrd(void) /* All in lowmem, easy case */ /* * don't need to reserve again, already reserved early - * in i386_start_kernel, and early_res_to_bootmem - * convert that to reserved in bootmem + * in i386_start_kernel */ initrd_start = ramdisk_image + PAGE_OFFSET; initrd_end = initrd_start+ramdisk_size; @@ -504,11 +497,14 @@ static void __init reserve_initrd(void) } /* We need to move the initrd down into lowmem */ - ramdisk_here = (end_of_lowmem - ramdisk_size) & PAGE_MASK; + ramdisk_here = find_e820_area(min_low_pfn<> PAGE_SHIFT, max_low_pfn); + printk(KERN_INFO " low ram: %08lx - %08lx\n", + min_low_pfn< Date: Mon, 12 May 2008 15:43:35 +0200 Subject: [PATCH 132/821] x86: move mp_ioapic_routing to mpparse and make it static mpparse is the only user of mp_ioapic_routing. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 2 -- arch/x86/kernel/mpparse.c | 4 ++-- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index c49ebcc6c41e..6f20fa92bbaf 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -331,8 +331,6 @@ acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long e #ifdef CONFIG_X86_IO_APIC -struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; - static int __init acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end) { diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 404683b94e79..bb7213335991 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -1,5 +1,5 @@ /* - * Intel Multiprocessor Specification 1.1 and 1.4 +2 * Intel Multiprocessor Specification 1.1 and 1.4 * compliant MP-table parsing routines. * * (c) 1995 Alan Cox, Building #3 @@ -805,7 +805,7 @@ int es7000_plat; #define MP_ISA_BUS 0 -extern struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; +static struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; static int mp_find_ioapic(int gsi) { From a91eea6df383f26fc4fcbefcbdb5aee8facd17fd Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:37 +0200 Subject: [PATCH 133/821] x86: fix shadow variables of global end_pnf in e820_64.c Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820_64.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 07941b554519..5a9bc9244dc6 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -51,21 +51,21 @@ static unsigned long __initdata end_user_pfn = MAXMEM>>PAGE_SHIFT; */ unsigned long __init e820_end_of_ram(void) { - unsigned long end_pfn; + unsigned long last_pfn; - end_pfn = find_max_pfn_with_active_regions(); + last_pfn = find_max_pfn_with_active_regions(); - if (end_pfn > max_pfn_mapped) - max_pfn_mapped = end_pfn; + if (last_pfn > max_pfn_mapped) + max_pfn_mapped = last_pfn; if (max_pfn_mapped > MAXMEM>>PAGE_SHIFT) max_pfn_mapped = MAXMEM>>PAGE_SHIFT; - if (end_pfn > end_user_pfn) - end_pfn = end_user_pfn; - if (end_pfn > max_pfn_mapped) - end_pfn = max_pfn_mapped; + if (last_pfn > end_user_pfn) + last_pfn = end_user_pfn; + if (last_pfn > max_pfn_mapped) + last_pfn = max_pfn_mapped; printk(KERN_INFO "max_pfn_mapped = %lu\n", max_pfn_mapped); - return end_pfn; + return last_pfn; } /* @@ -124,12 +124,12 @@ void __init e820_mark_nosave_regions(void) } /* - * Finds an active region in the address range from start_pfn to end_pfn and + * Finds an active region in the address range from start_pfn to last_pfn and * returns its range in ei_startpfn and ei_endpfn for the e820 entry. */ static int __init e820_find_active_region(const struct e820entry *ei, unsigned long start_pfn, - unsigned long end_pfn, + unsigned long last_pfn, unsigned long *ei_startpfn, unsigned long *ei_endpfn) { @@ -146,14 +146,14 @@ static int __init e820_find_active_region(const struct e820entry *ei, /* Skip if map is outside the node */ if (ei->type != E820_RAM || *ei_endpfn <= start_pfn || - *ei_startpfn >= end_pfn) + *ei_startpfn >= last_pfn) return 0; /* Check for overlaps */ if (*ei_startpfn < start_pfn) *ei_startpfn = start_pfn; - if (*ei_endpfn > end_pfn) - *ei_endpfn = end_pfn; + if (*ei_endpfn > last_pfn) + *ei_endpfn = last_pfn; /* Obey end_user_pfn to save on memmap */ if (*ei_startpfn >= end_user_pfn) @@ -167,7 +167,7 @@ static int __init e820_find_active_region(const struct e820entry *ei, /* Walk the e820 map and register active regions within a node */ void __init e820_register_active_regions(int nid, unsigned long start_pfn, - unsigned long end_pfn) + unsigned long last_pfn) { unsigned long ei_startpfn; unsigned long ei_endpfn; @@ -175,7 +175,7 @@ e820_register_active_regions(int nid, unsigned long start_pfn, for (i = 0; i < e820.nr_map; i++) if (e820_find_active_region(&e820.map[i], - start_pfn, end_pfn, + start_pfn, last_pfn, &ei_startpfn, &ei_endpfn)) add_active_range(nid, ei_startpfn, ei_endpfn); } @@ -188,13 +188,13 @@ e820_register_active_regions(int nid, unsigned long start_pfn, unsigned long __init e820_hole_size(unsigned long start, unsigned long end) { unsigned long start_pfn = start >> PAGE_SHIFT; - unsigned long end_pfn = end >> PAGE_SHIFT; + unsigned long last_pfn = end >> PAGE_SHIFT; unsigned long ei_startpfn, ei_endpfn, ram = 0; int i; for (i = 0; i < e820.nr_map; i++) { if (e820_find_active_region(&e820.map[i], - start_pfn, end_pfn, + start_pfn, last_pfn, &ei_startpfn, &ei_endpfn)) ram += ei_endpfn - ei_startpfn; } From 4a139a7fdec8964cecf7a3564ee7ae327141d495 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:37 +0200 Subject: [PATCH 134/821] x86: include pci.h in e820_64.c global pci_mem_start needs a declaration. include pci.h Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820_64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 5a9bc9244dc6..3b2e0b1bb49b 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include From 11a62a056093a7f25f1595fbd8bd5f93559572b6 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 12 May 2008 15:43:38 +0200 Subject: [PATCH 135/821] x86: cleanup print out for mptable the new output is: MPTABLE: OEM ID: SUN MPTABLE: Product ID: 4600 M2 MPTABLE: APIC at: 0x instead of it all in one line with <6> and double Product ID... Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/mpparse.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index bb7213335991..5a18b2b9852e 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -113,7 +113,7 @@ static void __init MP_bus_info(struct mpc_config_bus *m) #ifdef CONFIG_X86_NUMAQ mpc_oem_bus_info(m, str, translation_table[mpc_record]); #else - Dprintk("Bus #%d is %s\n", m->mpc_busid, str); + printk(KERN_INFO "Bus #%d is %s\n", m->mpc_busid, str); #endif #if MAX_MP_BUSSES < 256 @@ -183,7 +183,7 @@ static void __init MP_ioapic_info(struct mpc_config_ioapic *m) static void __init MP_intsrc_info(struct mpc_config_intsrc *m) { mp_irqs[mp_irq_entries] = *m; - Dprintk("Int: type %d, pol %d, trig %d, bus %d," + printk(KERN_INFO "Int: type %d, pol %d, trig %d, bus %02x," " IRQ %02x, APIC ID %x, APIC INT %02x\n", m->mpc_irqtype, m->mpc_irqflag & 3, (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus, @@ -196,7 +196,7 @@ static void __init MP_intsrc_info(struct mpc_config_intsrc *m) static void __init MP_lintsrc_info(struct mpc_config_lintsrc *m) { - Dprintk("Lint: type %d, pol %d, trig %d, bus %d," + printk(KERN_INFO "Lint: type %d, pol %d, trig %d, bus %02x," " IRQ %02x, APIC ID %x, APIC LINT %02x\n", m->mpc_irqtype, m->mpc_irqflag & 3, (m->mpc_irqflag >> 2) & 3, m->mpc_srcbusid, @@ -309,16 +309,15 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early) } memcpy(oem, mpc->mpc_oem, 8); oem[8] = 0; - printk(KERN_INFO "MPTABLE: OEM ID: %s ", oem); + printk(KERN_INFO "MPTABLE: OEM ID: %s\n", oem); memcpy(str, mpc->mpc_productid, 12); str[12] = 0; - printk("Product ID: %s ", str); #ifdef CONFIG_X86_32 mps_oem_check(mpc, oem, str); #endif - printk(KERN_INFO "MPTABLE: Product ID: %s ", str); + printk(KERN_INFO "MPTABLE: Product ID: %s\n", str); printk(KERN_INFO "MPTABLE: APIC at: 0x%X\n", mpc->mpc_lapic); @@ -689,7 +688,7 @@ static int __init smp_scan_config(unsigned long base, unsigned long length, unsigned int *bp = phys_to_virt(base); struct intel_mp_floating *mpf; - Dprintk("Scan SMP from %p for %ld bytes.\n", bp, length); + printk(KERN_DEBUG "Scan SMP from %p for %ld bytes.\n", bp, length); BUILD_BUG_ON(sizeof(*mpf) != 16); while (length > 0) { From 32c5061265caf201d6a2c0d02181e2b68769c22c Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 14 May 2008 19:02:51 +0400 Subject: [PATCH 136/821] x86: move es7000_plat out of mpparse.c Signed-off-by: Alexey Starikovskiy Signed-off-by: Ingo Molnar --- arch/x86/kernel/mpparse.c | 11 ++++++----- arch/x86/mach-es7000/es7000plat.c | 2 ++ include/asm-x86/system.h | 1 - 3 files changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 5a18b2b9852e..ff1342325efc 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -793,15 +793,14 @@ void __init find_smp_config(void) ACPI-based MP Configuration -------------------------------------------------------------------------- */ -/* - * Keep this outside and initialized to 0, for !CONFIG_ACPI builds: - */ -int es7000_plat; - #ifdef CONFIG_ACPI #ifdef CONFIG_X86_IO_APIC +#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH) +extern int es7000_plat; +#endif + #define MP_ISA_BUS 0 static struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; @@ -928,11 +927,13 @@ void __init mp_config_acpi_legacy_irqs(void) set_bit(MP_ISA_BUS, mp_bus_not_pci); Dprintk("Bus #%d is ISA\n", MP_ISA_BUS); +#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH) /* * Older generations of ES7000 have no legacy identity mappings */ if (es7000_plat == 1) return; +#endif /* * Locate the IOAPIC that manages the ISA IRQs (0-15). diff --git a/arch/x86/mach-es7000/es7000plat.c b/arch/x86/mach-es7000/es7000plat.c index f5d6f7d8b86e..a41c77a47227 100644 --- a/arch/x86/mach-es7000/es7000plat.c +++ b/arch/x86/mach-es7000/es7000plat.c @@ -52,6 +52,8 @@ static struct mip_reg *host_reg; static int mip_port; static unsigned long mip_addr, host_addr; +int es7000_plat; + /* * GSI override for ES7000 platforms. */ diff --git a/include/asm-x86/system.h b/include/asm-x86/system.h index a2f04cd79b29..9f7f63ba0042 100644 --- a/include/asm-x86/system.h +++ b/include/asm-x86/system.h @@ -303,7 +303,6 @@ static inline void clflush(volatile void *__p) void disable_hlt(void); void enable_hlt(void); -extern int es7000_plat; void cpu_idle_wait(void); extern unsigned long arch_align_stack(unsigned long sp); From 11113f84c72bd832dc4e76122e613b0e623e2346 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 14 May 2008 19:02:57 +0400 Subject: [PATCH 137/821] x86: complete move ACPI from mpparse.c Signed-off-by: Alexey Starikovskiy Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 304 ++++++++++++++++++++++++++++++++++++ arch/x86/kernel/mpparse.c | 299 +---------------------------------- 2 files changed, 305 insertions(+), 298 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 6f20fa92bbaf..b2ad09c4c6ae 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -846,6 +846,310 @@ static int __init acpi_parse_madt_lapic_entries(void) #endif /* CONFIG_X86_LOCAL_APIC */ #ifdef CONFIG_X86_IO_APIC +#define MP_ISA_BUS 0 + +#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH) +extern int es7000_plat; +#endif + +static struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; + +static int mp_find_ioapic(int gsi) +{ + int i = 0; + + /* Find the IOAPIC that manages this GSI. */ + for (i = 0; i < nr_ioapics; i++) { + if ((gsi >= mp_ioapic_routing[i].gsi_base) + && (gsi <= mp_ioapic_routing[i].gsi_end)) + return i; + } + + printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); + return -1; +} + +static u8 __init uniq_ioapic_id(u8 id) +{ +#ifdef CONFIG_X86_32 + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && + !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) + return io_apic_get_unique_id(nr_ioapics, id); + else + return id; +#else + int i; + DECLARE_BITMAP(used, 256); + bitmap_zero(used, 256); + for (i = 0; i < nr_ioapics; i++) { + struct mpc_config_ioapic *ia = &mp_ioapics[i]; + __set_bit(ia->mpc_apicid, used); + } + if (!test_bit(id, used)) + return id; + return find_first_zero_bit(used, 256); +#endif +} + +static int bad_ioapic(unsigned long address) +{ + if (nr_ioapics >= MAX_IO_APICS) { + printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " + "(found %d)\n", MAX_IO_APICS, nr_ioapics); + panic("Recompile kernel with bigger MAX_IO_APICS!\n"); + } + if (!address) { + printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address" + " found in table, skipping!\n"); + return 1; + } + return 0; +} + +void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) +{ + int idx = 0; + + if (bad_ioapic(address)) + return; + + idx = nr_ioapics; + + mp_ioapics[idx].mpc_type = MP_IOAPIC; + mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE; + mp_ioapics[idx].mpc_apicaddr = address; + + set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); + mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id); +#ifdef CONFIG_X86_32 + mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); +#else + mp_ioapics[idx].mpc_apicver = 0; +#endif + /* + * Build basic GSI lookup table to facilitate gsi->io_apic lookups + * and to prevent reprogramming of IOAPIC pins (PCI GSIs). + */ + mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid; + mp_ioapic_routing[idx].gsi_base = gsi_base; + mp_ioapic_routing[idx].gsi_end = gsi_base + + io_apic_get_redir_entries(idx); + + printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, " + "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, + mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr, + mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end); + + nr_ioapics++; +} + +void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) +{ + int ioapic = -1; + int pin = -1; + + /* + * Convert 'gsi' to 'ioapic.pin'. + */ + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) + return; + pin = gsi - mp_ioapic_routing[ioapic].gsi_base; + + /* + * TBD: This check is for faulty timer entries, where the override + * erroneously sets the trigger to level, resulting in a HUGE + * increase of timer interrupts! + */ + if ((bus_irq == 0) && (trigger == 3)) + trigger = 1; + + mp_irqs[mp_irq_entries].mpc_type = MP_INTSRC; + mp_irqs[mp_irq_entries].mpc_irqtype = mp_INT; + mp_irqs[mp_irq_entries].mpc_irqflag = (trigger << 2) | polarity; + mp_irqs[mp_irq_entries].mpc_srcbus = MP_ISA_BUS; + mp_irqs[mp_irq_entries].mpc_srcbusirq = bus_irq; /* IRQ */ + mp_irqs[mp_irq_entries].mpc_dstapic = + mp_ioapics[ioapic].mpc_apicid; /* APIC ID */ + mp_irqs[mp_irq_entries].mpc_dstirq = pin; /* INTIN# */ + + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!!\n"); + +} + +void __init mp_config_acpi_legacy_irqs(void) +{ + int i = 0; + int ioapic = -1; + +#if defined (CONFIG_MCA) || defined (CONFIG_EISA) + /* + * Fabricate the legacy ISA bus (bus #31). + */ + mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA; +#endif + set_bit(MP_ISA_BUS, mp_bus_not_pci); + Dprintk("Bus #%d is ISA\n", MP_ISA_BUS); + +#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH) + /* + * Older generations of ES7000 have no legacy identity mappings + */ + if (es7000_plat == 1) + return; +#endif + + /* + * Locate the IOAPIC that manages the ISA IRQs (0-15). + */ + ioapic = mp_find_ioapic(0); + if (ioapic < 0) + return; + + mp_irqs[mp_irq_entries].mpc_type = MP_INTSRC; + mp_irqs[mp_irq_entries].mpc_irqflag = 0; /* Conforming */ + mp_irqs[mp_irq_entries].mpc_srcbus = MP_ISA_BUS; +#ifdef CONFIG_X86_IO_APIC + mp_irqs[mp_irq_entries].mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; +#endif + /* + * Use the default configuration for the IRQs 0-15. Unless + * overridden by (MADT) interrupt source override entries. + */ + for (i = 0; i < 16; i++) { + int idx; + + for (idx = 0; idx < mp_irq_entries; idx++) { + struct mpc_config_intsrc *irq = mp_irqs + idx; + + /* Do we already have a mapping for this ISA IRQ? */ + if (irq->mpc_srcbus == MP_ISA_BUS + && irq->mpc_srcbusirq == i) + break; + + /* Do we already have a mapping for this IOAPIC pin */ + if ((irq->mpc_dstapic == + mp_irqs[mp_irq_entries].mpc_dstapic) && + (irq->mpc_dstirq == i)) + break; + } + + if (idx != mp_irq_entries) { + printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i); + continue; /* IRQ already used */ + } + + mp_irqs[mp_irq_entries].mpc_irqtype = mp_INT; + mp_irqs[mp_irq_entries].mpc_srcbusirq = i; /* Identity mapped */ + mp_irqs[mp_irq_entries].mpc_dstirq = i; + + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!!\n"); + } +} + +int mp_register_gsi(u32 gsi, int triggering, int polarity) +{ + int ioapic; + int ioapic_pin; +#ifdef CONFIG_X86_32 +#define MAX_GSI_NUM 4096 +#define IRQ_COMPRESSION_START 64 + + static int pci_irq = IRQ_COMPRESSION_START; + /* + * Mapping between Global System Interrupts, which + * represent all possible interrupts, and IRQs + * assigned to actual devices. + */ + static int gsi_to_irq[MAX_GSI_NUM]; +#else + + if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) + return gsi; +#endif + + /* Don't set up the ACPI SCI because it's already set up */ + if (acpi_gbl_FADT.sci_interrupt == gsi) + return gsi; + + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) { + printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi); + return gsi; + } + + ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base; + +#ifdef CONFIG_X86_32 + if (ioapic_renumber_irq) + gsi = ioapic_renumber_irq(ioapic, gsi); +#endif + + /* + * Avoid pin reprogramming. PRTs typically include entries + * with redundant pin->gsi mappings (but unique PCI devices); + * we only program the IOAPIC on the first. + */ + if (ioapic_pin > MP_MAX_IOAPIC_PIN) { + printk(KERN_ERR "Invalid reference to IOAPIC pin " + "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, + ioapic_pin); + return gsi; + } + if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) { + Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n", + mp_ioapic_routing[ioapic].apic_id, ioapic_pin); +#ifdef CONFIG_X86_32 + return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]); +#else + return gsi; +#endif + } + + set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed); +#ifdef CONFIG_X86_32 + /* + * For GSI >= 64, use IRQ compression + */ + if ((gsi >= IRQ_COMPRESSION_START) + && (triggering == ACPI_LEVEL_SENSITIVE)) { + /* + * For PCI devices assign IRQs in order, avoiding gaps + * due to unused I/O APIC pins. + */ + int irq = gsi; + if (gsi < MAX_GSI_NUM) { + /* + * Retain the VIA chipset work-around (gsi > 15), but + * avoid a problem where the 8254 timer (IRQ0) is setup + * via an override (so it's not on pin 0 of the ioapic), + * and at the same time, the pin 0 interrupt is a PCI + * type. The gsi > 15 test could cause these two pins + * to be shared as IRQ0, and they are not shareable. + * So test for this condition, and if necessary, avoid + * the pin collision. + */ + gsi = pci_irq++; + /* + * Don't assign IRQ used by ACPI SCI + */ + if (gsi == acpi_gbl_FADT.sci_interrupt) + gsi = pci_irq++; + gsi_to_irq[irq] = gsi; + } else { + printk(KERN_ERR "GSI %u is too high\n", gsi); + return gsi; + } + } +#endif + io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, + triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, + polarity == ACPI_ACTIVE_HIGH ? 0 : 1); + return gsi; +} + /* * Parse IOAPIC related entries in MADT * returns 0 on success, < 0 on error diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index ff1342325efc..d05b70c329c4 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -1,5 +1,5 @@ /* -2 * Intel Multiprocessor Specification 1.1 and 1.4 + * Intel Multiprocessor Specification 1.1 and 1.4 * compliant MP-table parsing routines. * * (c) 1995 Alan Cox, Building #3 @@ -788,300 +788,3 @@ void __init find_smp_config(void) { __find_smp_config(1); } - -/* -------------------------------------------------------------------------- - ACPI-based MP Configuration - -------------------------------------------------------------------------- */ - -#ifdef CONFIG_ACPI - -#ifdef CONFIG_X86_IO_APIC - -#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH) -extern int es7000_plat; -#endif - -#define MP_ISA_BUS 0 - -static struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; - -static int mp_find_ioapic(int gsi) -{ - int i = 0; - - /* Find the IOAPIC that manages this GSI. */ - for (i = 0; i < nr_ioapics; i++) { - if ((gsi >= mp_ioapic_routing[i].gsi_base) - && (gsi <= mp_ioapic_routing[i].gsi_end)) - return i; - } - - printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); - return -1; -} - -static u8 __init uniq_ioapic_id(u8 id) -{ -#ifdef CONFIG_X86_32 - if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && - !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) - return io_apic_get_unique_id(nr_ioapics, id); - else - return id; -#else - int i; - DECLARE_BITMAP(used, 256); - bitmap_zero(used, 256); - for (i = 0; i < nr_ioapics; i++) { - struct mpc_config_ioapic *ia = &mp_ioapics[i]; - __set_bit(ia->mpc_apicid, used); - } - if (!test_bit(id, used)) - return id; - return find_first_zero_bit(used, 256); -#endif -} - -void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) -{ - int idx = 0; - - if (bad_ioapic(address)) - return; - - idx = nr_ioapics; - - mp_ioapics[idx].mpc_type = MP_IOAPIC; - mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE; - mp_ioapics[idx].mpc_apicaddr = address; - - set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); - mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id); -#ifdef CONFIG_X86_32 - mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); -#else - mp_ioapics[idx].mpc_apicver = 0; -#endif - /* - * Build basic GSI lookup table to facilitate gsi->io_apic lookups - * and to prevent reprogramming of IOAPIC pins (PCI GSIs). - */ - mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid; - mp_ioapic_routing[idx].gsi_base = gsi_base; - mp_ioapic_routing[idx].gsi_end = gsi_base + - io_apic_get_redir_entries(idx); - - printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, " - "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, - mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr, - mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end); - - nr_ioapics++; -} - -void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) -{ - struct mpc_config_intsrc intsrc; - int ioapic = -1; - int pin = -1; - - /* - * Convert 'gsi' to 'ioapic.pin'. - */ - ioapic = mp_find_ioapic(gsi); - if (ioapic < 0) - return; - pin = gsi - mp_ioapic_routing[ioapic].gsi_base; - - /* - * TBD: This check is for faulty timer entries, where the override - * erroneously sets the trigger to level, resulting in a HUGE - * increase of timer interrupts! - */ - if ((bus_irq == 0) && (trigger == 3)) - trigger = 1; - - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqtype = mp_INT; - intsrc.mpc_irqflag = (trigger << 2) | polarity; - intsrc.mpc_srcbus = MP_ISA_BUS; - intsrc.mpc_srcbusirq = bus_irq; /* IRQ */ - intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */ - intsrc.mpc_dstirq = pin; /* INTIN# */ - - MP_intsrc_info(&intsrc); -} - -void __init mp_config_acpi_legacy_irqs(void) -{ - struct mpc_config_intsrc intsrc; - int i = 0; - int ioapic = -1; - -#if defined (CONFIG_MCA) || defined (CONFIG_EISA) - /* - * Fabricate the legacy ISA bus (bus #31). - */ - mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA; -#endif - set_bit(MP_ISA_BUS, mp_bus_not_pci); - Dprintk("Bus #%d is ISA\n", MP_ISA_BUS); - -#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH) - /* - * Older generations of ES7000 have no legacy identity mappings - */ - if (es7000_plat == 1) - return; -#endif - - /* - * Locate the IOAPIC that manages the ISA IRQs (0-15). - */ - ioapic = mp_find_ioapic(0); - if (ioapic < 0) - return; - - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqflag = 0; /* Conforming */ - intsrc.mpc_srcbus = MP_ISA_BUS; -#ifdef CONFIG_X86_IO_APIC - intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; -#endif - /* - * Use the default configuration for the IRQs 0-15. Unless - * overridden by (MADT) interrupt source override entries. - */ - for (i = 0; i < 16; i++) { - int idx; - - for (idx = 0; idx < mp_irq_entries; idx++) { - struct mpc_config_intsrc *irq = mp_irqs + idx; - - /* Do we already have a mapping for this ISA IRQ? */ - if (irq->mpc_srcbus == MP_ISA_BUS - && irq->mpc_srcbusirq == i) - break; - - /* Do we already have a mapping for this IOAPIC pin */ - if ((irq->mpc_dstapic == intsrc.mpc_dstapic) && - (irq->mpc_dstirq == i)) - break; - } - - if (idx != mp_irq_entries) { - printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i); - continue; /* IRQ already used */ - } - - intsrc.mpc_irqtype = mp_INT; - intsrc.mpc_srcbusirq = i; /* Identity mapped */ - intsrc.mpc_dstirq = i; - - MP_intsrc_info(&intsrc); - } -} - -int mp_register_gsi(u32 gsi, int triggering, int polarity) -{ - int ioapic; - int ioapic_pin; -#ifdef CONFIG_X86_32 -#define MAX_GSI_NUM 4096 -#define IRQ_COMPRESSION_START 64 - - static int pci_irq = IRQ_COMPRESSION_START; - /* - * Mapping between Global System Interrupts, which - * represent all possible interrupts, and IRQs - * assigned to actual devices. - */ - static int gsi_to_irq[MAX_GSI_NUM]; -#else - - if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) - return gsi; -#endif - - /* Don't set up the ACPI SCI because it's already set up */ - if (acpi_gbl_FADT.sci_interrupt == gsi) - return gsi; - - ioapic = mp_find_ioapic(gsi); - if (ioapic < 0) { - printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi); - return gsi; - } - - ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base; - -#ifdef CONFIG_X86_32 - if (ioapic_renumber_irq) - gsi = ioapic_renumber_irq(ioapic, gsi); -#endif - - /* - * Avoid pin reprogramming. PRTs typically include entries - * with redundant pin->gsi mappings (but unique PCI devices); - * we only program the IOAPIC on the first. - */ - if (ioapic_pin > MP_MAX_IOAPIC_PIN) { - printk(KERN_ERR "Invalid reference to IOAPIC pin " - "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, - ioapic_pin); - return gsi; - } - if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) { - Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n", - mp_ioapic_routing[ioapic].apic_id, ioapic_pin); -#ifdef CONFIG_X86_32 - return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]); -#else - return gsi; -#endif - } - - set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed); -#ifdef CONFIG_X86_32 - /* - * For GSI >= 64, use IRQ compression - */ - if ((gsi >= IRQ_COMPRESSION_START) - && (triggering == ACPI_LEVEL_SENSITIVE)) { - /* - * For PCI devices assign IRQs in order, avoiding gaps - * due to unused I/O APIC pins. - */ - int irq = gsi; - if (gsi < MAX_GSI_NUM) { - /* - * Retain the VIA chipset work-around (gsi > 15), but - * avoid a problem where the 8254 timer (IRQ0) is setup - * via an override (so it's not on pin 0 of the ioapic), - * and at the same time, the pin 0 interrupt is a PCI - * type. The gsi > 15 test could cause these two pins - * to be shared as IRQ0, and they are not shareable. - * So test for this condition, and if necessary, avoid - * the pin collision. - */ - gsi = pci_irq++; - /* - * Don't assign IRQ used by ACPI SCI - */ - if (gsi == acpi_gbl_FADT.sci_interrupt) - gsi = pci_irq++; - gsi_to_irq[irq] = gsi; - } else { - printk(KERN_ERR "GSI %u is too high\n", gsi); - return gsi; - } - } -#endif - io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, - triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, - polarity == ACPI_ACTIVE_HIGH ? 0 : 1); - return gsi; -} - -#endif /* CONFIG_X86_IO_APIC */ -#endif /* CONFIG_ACPI */ From 5f8951487ddbacbc949e9ffae574f94791f9b4dd Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 14 May 2008 19:03:04 +0400 Subject: [PATCH 138/821] x86: make mp_ioapic_routing definition local Signed-off-by: Alexey Starikovskiy Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 7 ++++++- include/asm-x86/io_apic.h | 7 ------- 2 files changed, 6 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index b2ad09c4c6ae..f75c2030f4b5 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -852,7 +852,12 @@ static int __init acpi_parse_madt_lapic_entries(void) extern int es7000_plat; #endif -static struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; +static struct { + int apic_id; + int gsi_base; + int gsi_end; + DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1); +} mp_ioapic_routing[MAX_IO_APICS]; static int mp_find_ioapic(int gsi) { diff --git a/include/asm-x86/io_apic.h b/include/asm-x86/io_apic.h index d593e14f0341..2ef96f0596e2 100644 --- a/include/asm-x86/io_apic.h +++ b/include/asm-x86/io_apic.h @@ -112,13 +112,6 @@ extern int nr_ioapic_registers[MAX_IO_APICS]; #define MP_MAX_IOAPIC_PIN 127 -struct mp_ioapic_routing { - int apic_id; - int gsi_base; - int gsi_end; - DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1); -}; - /* I/O APIC entries */ extern struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS]; From ec2cd0a22e2715f776a934e01c4f8ea098324fe1 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 14 May 2008 19:03:10 +0400 Subject: [PATCH 139/821] x86: make struct config_ioapic not MPspec specific Signed-off-by: Alexey Starikovskiy Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 28 +++++++++---------- arch/x86/kernel/apic_32.c | 2 +- arch/x86/kernel/io_apic_32.c | 52 ++++++++++++++++++------------------ arch/x86/kernel/io_apic_64.c | 26 +++++++++--------- arch/x86/kernel/mpparse.c | 8 ++++-- include/asm-x86/io_apic.h | 10 ++++++- 6 files changed, 69 insertions(+), 57 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index f75c2030f4b5..a26dd91faf0f 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -887,8 +887,8 @@ static u8 __init uniq_ioapic_id(u8 id) DECLARE_BITMAP(used, 256); bitmap_zero(used, 256); for (i = 0; i < nr_ioapics; i++) { - struct mpc_config_ioapic *ia = &mp_ioapics[i]; - __set_bit(ia->mpc_apicid, used); + struct mp_config_ioapic *ia = &mp_ioapics[i]; + __set_bit(ia->mp_apicid, used); } if (!test_bit(id, used)) return id; @@ -920,29 +920,29 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) idx = nr_ioapics; - mp_ioapics[idx].mpc_type = MP_IOAPIC; - mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE; - mp_ioapics[idx].mpc_apicaddr = address; + mp_ioapics[idx].mp_type = MP_IOAPIC; + mp_ioapics[idx].mp_flags = MPC_APIC_USABLE; + mp_ioapics[idx].mp_apicaddr = address; set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); - mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id); + mp_ioapics[idx].mp_apicid = uniq_ioapic_id(id); #ifdef CONFIG_X86_32 - mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); + mp_ioapics[idx].mp_apicver = io_apic_get_version(idx); #else - mp_ioapics[idx].mpc_apicver = 0; + mp_ioapics[idx].mp_apicver = 0; #endif /* * Build basic GSI lookup table to facilitate gsi->io_apic lookups * and to prevent reprogramming of IOAPIC pins (PCI GSIs). */ - mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid; + mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mp_apicid; mp_ioapic_routing[idx].gsi_base = gsi_base; mp_ioapic_routing[idx].gsi_end = gsi_base + io_apic_get_redir_entries(idx); - printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, " - "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, - mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr, + printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%lx, " + "GSI %d-%d\n", idx, mp_ioapics[idx].mp_apicid, + mp_ioapics[idx].mp_apicver, mp_ioapics[idx].mp_apicaddr, mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end); nr_ioapics++; @@ -975,7 +975,7 @@ void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) mp_irqs[mp_irq_entries].mpc_srcbus = MP_ISA_BUS; mp_irqs[mp_irq_entries].mpc_srcbusirq = bus_irq; /* IRQ */ mp_irqs[mp_irq_entries].mpc_dstapic = - mp_ioapics[ioapic].mpc_apicid; /* APIC ID */ + mp_ioapics[ioapic].mp_apicid; /* APIC ID */ mp_irqs[mp_irq_entries].mpc_dstirq = pin; /* INTIN# */ if (++mp_irq_entries == MAX_IRQ_SOURCES) @@ -1016,7 +1016,7 @@ void __init mp_config_acpi_legacy_irqs(void) mp_irqs[mp_irq_entries].mpc_irqflag = 0; /* Conforming */ mp_irqs[mp_irq_entries].mpc_srcbus = MP_ISA_BUS; #ifdef CONFIG_X86_IO_APIC - mp_irqs[mp_irq_entries].mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; + mp_irqs[mp_irq_entries].mpc_dstapic = mp_ioapics[ioapic].mp_apicid; #endif /* * Use the default configuration for the IRQs 0-15. Unless diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 4b99b1bdeb6c..fa1be1d62916 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -1202,7 +1202,7 @@ void __init init_apic_mappings(void) for (i = 0; i < nr_ioapics; i++) { if (smp_found_config) { - ioapic_phys = mp_ioapics[i].mpc_apicaddr; + ioapic_phys = mp_ioapics[i].mp_apicaddr; if (!ioapic_phys) { printk(KERN_ERR "WARNING: bogus zero IO-APIC " diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index a40d54fc1fdd..5af1b717236c 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -72,7 +72,7 @@ int sis_apic_bug = -1; int nr_ioapic_registers[MAX_IO_APICS]; /* I/O APIC entries */ -struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS]; +struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; int nr_ioapics; /* MP IRQ source entries */ @@ -110,7 +110,7 @@ struct io_apic { static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) { return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx) - + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK); + + (mp_ioapics[idx].mp_apicaddr & ~PAGE_MASK); } static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg) @@ -802,7 +802,7 @@ static int find_irq_entry(int apic, int pin, int type) for (i = 0; i < mp_irq_entries; i++) if (mp_irqs[i].mpc_irqtype == type && - (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid || + (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mp_apicid || mp_irqs[i].mpc_dstapic == MP_APIC_ALL) && mp_irqs[i].mpc_dstirq == pin) return i; @@ -844,7 +844,7 @@ static int __init find_isa_irq_apic(int irq, int type) if (i < mp_irq_entries) { int apic; for(apic = 0; apic < nr_ioapics; apic++) { - if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic) + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mpc_dstapic) return apic; } } @@ -872,7 +872,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) int lbus = mp_irqs[i].mpc_srcbus; for (apic = 0; apic < nr_ioapics; apic++) - if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic || + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mpc_dstapic || mp_irqs[i].mpc_dstapic == MP_APIC_ALL) break; @@ -1250,12 +1250,12 @@ static void __init setup_IO_APIC_irqs(void) if (first_notcon) { apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", - mp_ioapics[apic].mpc_apicid, + mp_ioapics[apic].mp_apicid, pin); first_notcon = 0; } else apic_printk(APIC_VERBOSE, ", %d-%d", - mp_ioapics[apic].mpc_apicid, pin); + mp_ioapics[apic].mp_apicid, pin); continue; } @@ -1357,7 +1357,7 @@ void __init print_IO_APIC(void) printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); for (i = 0; i < nr_ioapics; i++) printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", - mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]); + mp_ioapics[i].mp_apicid, nr_ioapic_registers[i]); /* * We are a bit conservative about what we expect. We have to @@ -1376,7 +1376,7 @@ void __init print_IO_APIC(void) reg_03.raw = io_apic_read(apic, 3); spin_unlock_irqrestore(&ioapic_lock, flags); - printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid); + printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mp_apicid); printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type); @@ -1749,14 +1749,14 @@ static void __init setup_ioapic_ids_from_mpc(void) reg_00.raw = io_apic_read(apic, 0); spin_unlock_irqrestore(&ioapic_lock, flags); - old_id = mp_ioapics[apic].mpc_apicid; + old_id = mp_ioapics[apic].mp_apicid; - if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) { + if (mp_ioapics[apic].mp_apicid >= get_physical_broadcast()) { printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n", - apic, mp_ioapics[apic].mpc_apicid); + apic, mp_ioapics[apic].mp_apicid); printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", reg_00.bits.ID); - mp_ioapics[apic].mpc_apicid = reg_00.bits.ID; + mp_ioapics[apic].mp_apicid = reg_00.bits.ID; } /* @@ -1765,9 +1765,9 @@ static void __init setup_ioapic_ids_from_mpc(void) * 'stuck on smp_invalidate_needed IPI wait' messages. */ if (check_apicid_used(phys_id_present_map, - mp_ioapics[apic].mpc_apicid)) { + mp_ioapics[apic].mp_apicid)) { printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n", - apic, mp_ioapics[apic].mpc_apicid); + apic, mp_ioapics[apic].mp_apicid); for (i = 0; i < get_physical_broadcast(); i++) if (!physid_isset(i, phys_id_present_map)) break; @@ -1776,13 +1776,13 @@ static void __init setup_ioapic_ids_from_mpc(void) printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", i); physid_set(i, phys_id_present_map); - mp_ioapics[apic].mpc_apicid = i; + mp_ioapics[apic].mp_apicid = i; } else { physid_mask_t tmp; - tmp = apicid_to_cpu_present(mp_ioapics[apic].mpc_apicid); + tmp = apicid_to_cpu_present(mp_ioapics[apic].mp_apicid); apic_printk(APIC_VERBOSE, "Setting %d in the " "phys_id_present_map\n", - mp_ioapics[apic].mpc_apicid); + mp_ioapics[apic].mp_apicid); physids_or(phys_id_present_map, phys_id_present_map, tmp); } @@ -1791,11 +1791,11 @@ static void __init setup_ioapic_ids_from_mpc(void) * We need to adjust the IRQ routing table * if the ID changed. */ - if (old_id != mp_ioapics[apic].mpc_apicid) + if (old_id != mp_ioapics[apic].mp_apicid) for (i = 0; i < mp_irq_entries; i++) if (mp_irqs[i].mpc_dstapic == old_id) mp_irqs[i].mpc_dstapic - = mp_ioapics[apic].mpc_apicid; + = mp_ioapics[apic].mp_apicid; /* * Read the right value from the MPC table and @@ -1803,9 +1803,9 @@ static void __init setup_ioapic_ids_from_mpc(void) */ apic_printk(APIC_VERBOSE, KERN_INFO "...changing IO-APIC physical APIC ID to %d ...", - mp_ioapics[apic].mpc_apicid); + mp_ioapics[apic].mp_apicid); - reg_00.bits.ID = mp_ioapics[apic].mpc_apicid; + reg_00.bits.ID = mp_ioapics[apic].mp_apicid; spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(apic, 0, reg_00.raw); spin_unlock_irqrestore(&ioapic_lock, flags); @@ -1816,7 +1816,7 @@ static void __init setup_ioapic_ids_from_mpc(void) spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(apic, 0); spin_unlock_irqrestore(&ioapic_lock, flags); - if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid) + if (reg_00.bits.ID != mp_ioapics[apic].mp_apicid) printk("could not set ID!\n"); else apic_printk(APIC_VERBOSE, " ok.\n"); @@ -2355,8 +2355,8 @@ static int ioapic_resume(struct sys_device *dev) spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(dev->id, 0); - if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) { - reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid; + if (reg_00.bits.ID != mp_ioapics[dev->id].mp_apicid) { + reg_00.bits.ID = mp_ioapics[dev->id].mp_apicid; io_apic_write(dev->id, 0, reg_00.raw); } spin_unlock_irqrestore(&ioapic_lock, flags); @@ -2789,7 +2789,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a apic_printk(APIC_DEBUG, KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry " "(%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i)\n", ioapic, - mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq, + mp_ioapics[ioapic].mp_apicid, pin, entry.vector, irq, edge_level, active_high_low); ioapic_register_intr(irq, entry.vector, edge_level); diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index ef1a8dfcc529..4555ad8c2070 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -104,7 +104,7 @@ DEFINE_SPINLOCK(vector_lock); int nr_ioapic_registers[MAX_IO_APICS]; /* I/O APIC entries */ -struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS]; +struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; int nr_ioapics; /* MP IRQ source entries */ @@ -140,7 +140,7 @@ struct io_apic { static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) { return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx) - + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK); + + (mp_ioapics[idx].mp_apicaddr & ~PAGE_MASK); } static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg) @@ -454,7 +454,7 @@ static int find_irq_entry(int apic, int pin, int type) for (i = 0; i < mp_irq_entries; i++) if (mp_irqs[i].mpc_irqtype == type && - (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid || + (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mp_apicid || mp_irqs[i].mpc_dstapic == MP_APIC_ALL) && mp_irqs[i].mpc_dstirq == pin) return i; @@ -496,7 +496,7 @@ static int __init find_isa_irq_apic(int irq, int type) if (i < mp_irq_entries) { int apic; for(apic = 0; apic < nr_ioapics; apic++) { - if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic) + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mpc_dstapic) return apic; } } @@ -524,7 +524,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) int lbus = mp_irqs[i].mpc_srcbus; for (apic = 0; apic < nr_ioapics; apic++) - if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic || + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mpc_dstapic || mp_irqs[i].mpc_dstapic == MP_APIC_ALL) break; @@ -846,7 +846,7 @@ static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq, apic_printk(APIC_VERBOSE,KERN_DEBUG "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> " "IRQ %d Mode:%i Active:%i)\n", - apic, mp_ioapics[apic].mpc_apicid, pin, cfg->vector, + apic, mp_ioapics[apic].mp_apicid, pin, cfg->vector, irq, trigger, polarity); /* @@ -887,10 +887,10 @@ static void __init setup_IO_APIC_irqs(void) idx = find_irq_entry(apic,pin,mp_INT); if (idx == -1) { if (first_notcon) { - apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mpc_apicid, pin); + apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mp_apicid, pin); first_notcon = 0; } else - apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mpc_apicid, pin); + apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mp_apicid, pin); continue; } if (!first_notcon) { @@ -965,7 +965,7 @@ void __apicdebuginit print_IO_APIC(void) printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); for (i = 0; i < nr_ioapics; i++) printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", - mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]); + mp_ioapics[i].mp_apicid, nr_ioapic_registers[i]); /* * We are a bit conservative about what we expect. We have to @@ -983,7 +983,7 @@ void __apicdebuginit print_IO_APIC(void) spin_unlock_irqrestore(&ioapic_lock, flags); printk("\n"); - printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid); + printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mp_apicid); printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); @@ -1841,8 +1841,8 @@ static int ioapic_resume(struct sys_device *dev) spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(dev->id, 0); - if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) { - reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid; + if (reg_00.bits.ID != mp_ioapics[dev->id].mp_apicid) { + reg_00.bits.ID = mp_ioapics[dev->id].mp_apicid; io_apic_write(dev->id, 0, reg_00.raw); } spin_unlock_irqrestore(&ioapic_lock, flags); @@ -2336,7 +2336,7 @@ void __init ioapic_init_mappings(void) ioapic_res = ioapic_setup_resources(); for (i = 0; i < nr_ioapics; i++) { if (smp_found_config) { - ioapic_phys = mp_ioapics[i].mpc_apicaddr; + ioapic_phys = mp_ioapics[i].mp_apicaddr; } else { ioapic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE); diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index d05b70c329c4..9f1e5bf7f0fb 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -176,7 +176,11 @@ static void __init MP_ioapic_info(struct mpc_config_ioapic *m) if (bad_ioapic(m->mpc_apicaddr)) return; - mp_ioapics[nr_ioapics] = *m; + mp_ioapics[nr_ioapics].mp_apicaddr = m->mpc_apicaddr; + mp_ioapics[nr_ioapics].mp_apicid = m->mpc_apicid; + mp_ioapics[nr_ioapics].mp_type = m->mpc_type; + mp_ioapics[nr_ioapics].mp_apicver = m->mpc_apicver; + mp_ioapics[nr_ioapics].mp_flags = m->mpc_flags; nr_ioapics++; } @@ -426,7 +430,7 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type) intsrc.mpc_type = MP_INTSRC; intsrc.mpc_irqflag = 0; /* conforming */ intsrc.mpc_srcbus = 0; - intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid; + intsrc.mpc_dstapic = mp_ioapics[0].mp_apicid; intsrc.mpc_irqtype = mp_INT; diff --git a/include/asm-x86/io_apic.h b/include/asm-x86/io_apic.h index 2ef96f0596e2..ade76c0d03ae 100644 --- a/include/asm-x86/io_apic.h +++ b/include/asm-x86/io_apic.h @@ -112,8 +112,16 @@ extern int nr_ioapic_registers[MAX_IO_APICS]; #define MP_MAX_IOAPIC_PIN 127 +struct mp_config_ioapic { + unsigned long mp_apicaddr; + unsigned int mp_apicid; + unsigned char mp_type; + unsigned char mp_apicver; + unsigned char mp_flags; +}; + /* I/O APIC entries */ -extern struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS]; +extern struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; /* # of MP IRQ source entries */ extern int mp_irq_entries; From 2fddb6e28e903a3ab1704cc5aac01be5a59dc05b Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 14 May 2008 19:03:17 +0400 Subject: [PATCH 140/821] x86: make config_irqsrc not MPspec specific Signed-off-by: Alexey Starikovskiy Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 43 ++++++++++++------------ arch/x86/kernel/io_apic_32.c | 64 ++++++++++++++++++------------------ arch/x86/kernel/io_apic_64.c | 58 ++++++++++++++++---------------- arch/x86/kernel/mpparse.c | 8 ++++- include/asm-x86/io_apic.h | 12 ++++++- 5 files changed, 100 insertions(+), 85 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index a26dd91faf0f..276ec058f683 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -969,14 +969,14 @@ void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) if ((bus_irq == 0) && (trigger == 3)) trigger = 1; - mp_irqs[mp_irq_entries].mpc_type = MP_INTSRC; - mp_irqs[mp_irq_entries].mpc_irqtype = mp_INT; - mp_irqs[mp_irq_entries].mpc_irqflag = (trigger << 2) | polarity; - mp_irqs[mp_irq_entries].mpc_srcbus = MP_ISA_BUS; - mp_irqs[mp_irq_entries].mpc_srcbusirq = bus_irq; /* IRQ */ - mp_irqs[mp_irq_entries].mpc_dstapic = + mp_irqs[mp_irq_entries].mp_type = MP_INTSRC; + mp_irqs[mp_irq_entries].mp_irqtype = mp_INT; + mp_irqs[mp_irq_entries].mp_irqflag = (trigger << 2) | polarity; + mp_irqs[mp_irq_entries].mp_srcbus = MP_ISA_BUS; + mp_irqs[mp_irq_entries].mp_srcbusirq = bus_irq; /* IRQ */ + mp_irqs[mp_irq_entries].mp_dstapic = mp_ioapics[ioapic].mp_apicid; /* APIC ID */ - mp_irqs[mp_irq_entries].mpc_dstirq = pin; /* INTIN# */ + mp_irqs[mp_irq_entries].mp_dstirq = pin; /* INTIN# */ if (++mp_irq_entries == MAX_IRQ_SOURCES) panic("Max # of irq sources exceeded!!\n"); @@ -1012,12 +1012,11 @@ void __init mp_config_acpi_legacy_irqs(void) if (ioapic < 0) return; - mp_irqs[mp_irq_entries].mpc_type = MP_INTSRC; - mp_irqs[mp_irq_entries].mpc_irqflag = 0; /* Conforming */ - mp_irqs[mp_irq_entries].mpc_srcbus = MP_ISA_BUS; -#ifdef CONFIG_X86_IO_APIC - mp_irqs[mp_irq_entries].mpc_dstapic = mp_ioapics[ioapic].mp_apicid; -#endif + mp_irqs[mp_irq_entries].mp_type = MP_INTSRC; + mp_irqs[mp_irq_entries].mp_irqflag = 0; /* Conforming */ + mp_irqs[mp_irq_entries].mp_srcbus = MP_ISA_BUS; + mp_irqs[mp_irq_entries].mp_dstapic = mp_ioapics[ioapic].mp_apicid; + /* * Use the default configuration for the IRQs 0-15. Unless * overridden by (MADT) interrupt source override entries. @@ -1026,17 +1025,17 @@ void __init mp_config_acpi_legacy_irqs(void) int idx; for (idx = 0; idx < mp_irq_entries; idx++) { - struct mpc_config_intsrc *irq = mp_irqs + idx; + struct mp_config_intsrc *irq = mp_irqs + idx; /* Do we already have a mapping for this ISA IRQ? */ - if (irq->mpc_srcbus == MP_ISA_BUS - && irq->mpc_srcbusirq == i) + if (irq->mp_srcbus == MP_ISA_BUS + && irq->mp_srcbusirq == i) break; /* Do we already have a mapping for this IOAPIC pin */ - if ((irq->mpc_dstapic == - mp_irqs[mp_irq_entries].mpc_dstapic) && - (irq->mpc_dstirq == i)) + if ((irq->mp_dstapic == + mp_irqs[mp_irq_entries].mp_dstapic) && + (irq->mp_dstirq == i)) break; } @@ -1045,9 +1044,9 @@ void __init mp_config_acpi_legacy_irqs(void) continue; /* IRQ already used */ } - mp_irqs[mp_irq_entries].mpc_irqtype = mp_INT; - mp_irqs[mp_irq_entries].mpc_srcbusirq = i; /* Identity mapped */ - mp_irqs[mp_irq_entries].mpc_dstirq = i; + mp_irqs[mp_irq_entries].mp_irqtype = mp_INT; + mp_irqs[mp_irq_entries].mp_srcbusirq = i; /* Identity mapped */ + mp_irqs[mp_irq_entries].mp_dstirq = i; if (++mp_irq_entries == MAX_IRQ_SOURCES) panic("Max # of irq sources exceeded!!\n"); diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 5af1b717236c..ea68c3e5ba1d 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -76,7 +76,7 @@ struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; int nr_ioapics; /* MP IRQ source entries */ -struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; +struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; /* # of MP IRQ source entries */ int mp_irq_entries; @@ -801,10 +801,10 @@ static int find_irq_entry(int apic, int pin, int type) int i; for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_irqtype == type && - (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mp_apicid || - mp_irqs[i].mpc_dstapic == MP_APIC_ALL) && - mp_irqs[i].mpc_dstirq == pin) + if (mp_irqs[i].mp_irqtype == type && + (mp_irqs[i].mp_dstapic == mp_ioapics[apic].mp_apicid || + mp_irqs[i].mp_dstapic == MP_APIC_ALL) && + mp_irqs[i].mp_dstirq == pin) return i; return -1; @@ -818,13 +818,13 @@ static int __init find_isa_irq_pin(int irq, int type) int i; for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; + int lbus = mp_irqs[i].mp_srcbus; if (test_bit(lbus, mp_bus_not_pci) && - (mp_irqs[i].mpc_irqtype == type) && - (mp_irqs[i].mpc_srcbusirq == irq)) + (mp_irqs[i].mp_irqtype == type) && + (mp_irqs[i].mp_srcbusirq == irq)) - return mp_irqs[i].mpc_dstirq; + return mp_irqs[i].mp_dstirq; } return -1; } @@ -834,17 +834,17 @@ static int __init find_isa_irq_apic(int irq, int type) int i; for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; + int lbus = mp_irqs[i].mp_srcbus; if (test_bit(lbus, mp_bus_not_pci) && - (mp_irqs[i].mpc_irqtype == type) && - (mp_irqs[i].mpc_srcbusirq == irq)) + (mp_irqs[i].mp_irqtype == type) && + (mp_irqs[i].mp_srcbusirq == irq)) break; } if (i < mp_irq_entries) { int apic; for(apic = 0; apic < nr_ioapics; apic++) { - if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mpc_dstapic) + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic) return apic; } } @@ -869,23 +869,23 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) return -1; } for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; + int lbus = mp_irqs[i].mp_srcbus; for (apic = 0; apic < nr_ioapics; apic++) - if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mpc_dstapic || - mp_irqs[i].mpc_dstapic == MP_APIC_ALL) + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic || + mp_irqs[i].mp_dstapic == MP_APIC_ALL) break; if (!test_bit(lbus, mp_bus_not_pci) && - !mp_irqs[i].mpc_irqtype && + !mp_irqs[i].mp_irqtype && (bus == lbus) && - (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) { - int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq); + (slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) { + int irq = pin_2_irq(i,apic,mp_irqs[i].mp_dstirq); if (!(apic || IO_APIC_IRQ(irq))) continue; - if (pin == (mp_irqs[i].mpc_srcbusirq & 3)) + if (pin == (mp_irqs[i].mp_srcbusirq & 3)) return irq; /* * Use the first all-but-pin matching entry as a @@ -952,7 +952,7 @@ static int EISA_ELCR(unsigned int irq) * EISA conforming in the MP table, that means its trigger type must * be read in from the ELCR */ -#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mpc_srcbusirq)) +#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mp_srcbusirq)) #define default_EISA_polarity(idx) default_ISA_polarity(idx) /* PCI interrupts are always polarity one level triggered, @@ -969,13 +969,13 @@ static int EISA_ELCR(unsigned int irq) static int MPBIOS_polarity(int idx) { - int bus = mp_irqs[idx].mpc_srcbus; + int bus = mp_irqs[idx].mp_srcbus; int polarity; /* * Determine IRQ line polarity (high active or low active): */ - switch (mp_irqs[idx].mpc_irqflag & 3) + switch (mp_irqs[idx].mp_irqflag & 3) { case 0: /* conforms, ie. bus-type dependent polarity */ { @@ -1012,13 +1012,13 @@ static int MPBIOS_polarity(int idx) static int MPBIOS_trigger(int idx) { - int bus = mp_irqs[idx].mpc_srcbus; + int bus = mp_irqs[idx].mp_srcbus; int trigger; /* * Determine IRQ trigger mode (edge or level sensitive): */ - switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) + switch ((mp_irqs[idx].mp_irqflag>>2) & 3) { case 0: /* conforms, ie. bus-type dependent */ { @@ -1097,16 +1097,16 @@ static inline int irq_trigger(int idx) static int pin_2_irq(int idx, int apic, int pin) { int irq, i; - int bus = mp_irqs[idx].mpc_srcbus; + int bus = mp_irqs[idx].mp_srcbus; /* * Debugging check, we are in big trouble if this message pops up! */ - if (mp_irqs[idx].mpc_dstirq != pin) + if (mp_irqs[idx].mp_dstirq != pin) printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n"); if (test_bit(bus, mp_bus_not_pci)) - irq = mp_irqs[idx].mpc_srcbusirq; + irq = mp_irqs[idx].mp_srcbusirq; else { /* * PCI IRQs are mapped in order @@ -1793,8 +1793,8 @@ static void __init setup_ioapic_ids_from_mpc(void) */ if (old_id != mp_ioapics[apic].mp_apicid) for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_dstapic == old_id) - mp_irqs[i].mpc_dstapic + if (mp_irqs[i].mp_dstapic == old_id) + mp_irqs[i].mp_dstapic = mp_ioapics[apic].mp_apicid; /* @@ -2810,8 +2810,8 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity) return -1; for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_irqtype == mp_INT && - mp_irqs[i].mpc_srcbusirq == bus_irq) + if (mp_irqs[i].mp_irqtype == mp_INT && + mp_irqs[i].mp_srcbusirq == bus_irq) break; if (i >= mp_irq_entries) return -1; diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 4555ad8c2070..e7f1476ed537 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -108,7 +108,7 @@ struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; int nr_ioapics; /* MP IRQ source entries */ -struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; +struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; /* # of MP IRQ source entries */ int mp_irq_entries; @@ -453,10 +453,10 @@ static int find_irq_entry(int apic, int pin, int type) int i; for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_irqtype == type && - (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mp_apicid || - mp_irqs[i].mpc_dstapic == MP_APIC_ALL) && - mp_irqs[i].mpc_dstirq == pin) + if (mp_irqs[i].mp_irqtype == type && + (mp_irqs[i].mp_dstapic == mp_ioapics[apic].mp_apicid || + mp_irqs[i].mp_dstapic == MP_APIC_ALL) && + mp_irqs[i].mp_dstirq == pin) return i; return -1; @@ -470,13 +470,13 @@ static int __init find_isa_irq_pin(int irq, int type) int i; for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; + int lbus = mp_irqs[i].mp_srcbus; if (test_bit(lbus, mp_bus_not_pci) && - (mp_irqs[i].mpc_irqtype == type) && - (mp_irqs[i].mpc_srcbusirq == irq)) + (mp_irqs[i].mp_irqtype == type) && + (mp_irqs[i].mp_srcbusirq == irq)) - return mp_irqs[i].mpc_dstirq; + return mp_irqs[i].mp_dstirq; } return -1; } @@ -486,17 +486,17 @@ static int __init find_isa_irq_apic(int irq, int type) int i; for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; + int lbus = mp_irqs[i].mp_srcbus; if (test_bit(lbus, mp_bus_not_pci) && - (mp_irqs[i].mpc_irqtype == type) && - (mp_irqs[i].mpc_srcbusirq == irq)) + (mp_irqs[i].mp_irqtype == type) && + (mp_irqs[i].mp_srcbusirq == irq)) break; } if (i < mp_irq_entries) { int apic; for(apic = 0; apic < nr_ioapics; apic++) { - if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mpc_dstapic) + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic) return apic; } } @@ -521,23 +521,23 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) return -1; } for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; + int lbus = mp_irqs[i].mp_srcbus; for (apic = 0; apic < nr_ioapics; apic++) - if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mpc_dstapic || - mp_irqs[i].mpc_dstapic == MP_APIC_ALL) + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic || + mp_irqs[i].mp_dstapic == MP_APIC_ALL) break; if (!test_bit(lbus, mp_bus_not_pci) && - !mp_irqs[i].mpc_irqtype && + !mp_irqs[i].mp_irqtype && (bus == lbus) && - (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) { - int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq); + (slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) { + int irq = pin_2_irq(i,apic,mp_irqs[i].mp_dstirq); if (!(apic || IO_APIC_IRQ(irq))) continue; - if (pin == (mp_irqs[i].mpc_srcbusirq & 3)) + if (pin == (mp_irqs[i].mp_srcbusirq & 3)) return irq; /* * Use the first all-but-pin matching entry as a @@ -565,13 +565,13 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) static int MPBIOS_polarity(int idx) { - int bus = mp_irqs[idx].mpc_srcbus; + int bus = mp_irqs[idx].mp_srcbus; int polarity; /* * Determine IRQ line polarity (high active or low active): */ - switch (mp_irqs[idx].mpc_irqflag & 3) + switch (mp_irqs[idx].mp_irqflag & 3) { case 0: /* conforms, ie. bus-type dependent polarity */ if (test_bit(bus, mp_bus_not_pci)) @@ -607,13 +607,13 @@ static int MPBIOS_polarity(int idx) static int MPBIOS_trigger(int idx) { - int bus = mp_irqs[idx].mpc_srcbus; + int bus = mp_irqs[idx].mp_srcbus; int trigger; /* * Determine IRQ trigger mode (edge or level sensitive): */ - switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) + switch ((mp_irqs[idx].mp_irqflag>>2) & 3) { case 0: /* conforms, ie. bus-type dependent */ if (test_bit(bus, mp_bus_not_pci)) @@ -660,16 +660,16 @@ static inline int irq_trigger(int idx) static int pin_2_irq(int idx, int apic, int pin) { int irq, i; - int bus = mp_irqs[idx].mpc_srcbus; + int bus = mp_irqs[idx].mp_srcbus; /* * Debugging check, we are in big trouble if this message pops up! */ - if (mp_irqs[idx].mpc_dstirq != pin) + if (mp_irqs[idx].mp_dstirq != pin) printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n"); if (test_bit(bus, mp_bus_not_pci)) { - irq = mp_irqs[idx].mpc_srcbusirq; + irq = mp_irqs[idx].mp_srcbusirq; } else { /* * PCI IRQs are mapped in order @@ -2242,8 +2242,8 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity) return -1; for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_irqtype == mp_INT && - mp_irqs[i].mpc_srcbusirq == bus_irq) + if (mp_irqs[i].mp_irqtype == mp_INT && + mp_irqs[i].mp_srcbusirq == bus_irq) break; if (i >= mp_irq_entries) return -1; diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 9f1e5bf7f0fb..59f051db236d 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -186,12 +186,18 @@ static void __init MP_ioapic_info(struct mpc_config_ioapic *m) static void __init MP_intsrc_info(struct mpc_config_intsrc *m) { - mp_irqs[mp_irq_entries] = *m; printk(KERN_INFO "Int: type %d, pol %d, trig %d, bus %02x," " IRQ %02x, APIC ID %x, APIC INT %02x\n", m->mpc_irqtype, m->mpc_irqflag & 3, (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus, m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq); + mp_irqs[mp_irq_entries].mp_dstapic = m->mpc_dstapic; + mp_irqs[mp_irq_entries].mp_type = m->mpc_type; + mp_irqs[mp_irq_entries].mp_irqtype = m->mpc_irqtype; + mp_irqs[mp_irq_entries].mp_irqflag = m->mpc_irqflag; + mp_irqs[mp_irq_entries].mp_srcbus = m->mpc_srcbus; + mp_irqs[mp_irq_entries].mp_srcbusirq = m->mpc_srcbusirq; + mp_irqs[mp_irq_entries].mp_dstirq = m->mpc_dstirq; if (++mp_irq_entries == MAX_IRQ_SOURCES) panic("Max # of irq sources exceeded!!\n"); } diff --git a/include/asm-x86/io_apic.h b/include/asm-x86/io_apic.h index ade76c0d03ae..86d8c3bdcca4 100644 --- a/include/asm-x86/io_apic.h +++ b/include/asm-x86/io_apic.h @@ -120,6 +120,16 @@ struct mp_config_ioapic { unsigned char mp_flags; }; +struct mp_config_intsrc { + unsigned int mp_dstapic; + unsigned char mp_type; + unsigned char mp_irqtype; + unsigned short mp_irqflag; + unsigned char mp_srcbus; + unsigned char mp_srcbusirq; + unsigned char mp_dstirq; +}; + /* I/O APIC entries */ extern struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; @@ -127,7 +137,7 @@ extern struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; extern int mp_irq_entries; /* MP IRQ source entries */ -extern struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; +extern struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; /* non-0 if default (table-less) MP configuration */ extern int mpc_default_type; From 59f4519ad7ade61123e90085b0dadb2ea197bd87 Mon Sep 17 00:00:00 2001 From: Soeren Sandmann Date: Sun, 18 May 2008 05:24:41 +0200 Subject: [PATCH 141/821] x86: initialize all fields of mp_irqs[mp_irq_entries] Commit "x86: make config_irqsrc not MPspec specific" introduced some uses of uninitialized fields in mp_config_acpi_legacy_irqs(). I need the following patch to get sched-devel/master to boot. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/acpi/boot.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 276ec058f683..6170c6aeaf79 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1012,11 +1012,6 @@ void __init mp_config_acpi_legacy_irqs(void) if (ioapic < 0) return; - mp_irqs[mp_irq_entries].mp_type = MP_INTSRC; - mp_irqs[mp_irq_entries].mp_irqflag = 0; /* Conforming */ - mp_irqs[mp_irq_entries].mp_srcbus = MP_ISA_BUS; - mp_irqs[mp_irq_entries].mp_dstapic = mp_ioapics[ioapic].mp_apicid; - /* * Use the default configuration for the IRQs 0-15. Unless * overridden by (MADT) interrupt source override entries. @@ -1044,6 +1039,10 @@ void __init mp_config_acpi_legacy_irqs(void) continue; /* IRQ already used */ } + mp_irqs[mp_irq_entries].mp_type = MP_INTSRC; + mp_irqs[mp_irq_entries].mp_irqflag = 0; /* Conforming */ + mp_irqs[mp_irq_entries].mp_srcbus = MP_ISA_BUS; + mp_irqs[mp_irq_entries].mp_dstapic = mp_ioapics[ioapic].mp_apicid; mp_irqs[mp_irq_entries].mp_irqtype = mp_INT; mp_irqs[mp_irq_entries].mp_srcbusirq = i; /* Identity mapped */ mp_irqs[mp_irq_entries].mp_dstirq = i; From aafbdf71f1d3aeffd679b1a86e1b28f71515856c Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Thu, 22 May 2008 12:26:15 +0400 Subject: [PATCH 142/821] x86: fix mpparse/acpi interaction Sitsofe Wheeler reported boot problems on linux-next. It looks like the same issue as found by Soeren Sandman in 7575217f656a93, "x86: initialize all fields of mp_irqs[mp_irq_entries]". But his fix is also not complete, as dstapic is used before it assigned. Reported-by: Sitsofe Wheeler Bisected-by: Sitsofe Wheeler Signed-off-by: Alexey Starikovskiy Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/acpi/boot.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 6170c6aeaf79..2ddfabae382b 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1019,6 +1019,11 @@ void __init mp_config_acpi_legacy_irqs(void) for (i = 0; i < 16; i++) { int idx; + mp_irqs[mp_irq_entries].mp_type = MP_INTSRC; + mp_irqs[mp_irq_entries].mp_irqflag = 0; /* Conforming */ + mp_irqs[mp_irq_entries].mp_srcbus = MP_ISA_BUS; + mp_irqs[mp_irq_entries].mp_dstapic = mp_ioapics[ioapic].mp_apicid; + for (idx = 0; idx < mp_irq_entries; idx++) { struct mp_config_intsrc *irq = mp_irqs + idx; @@ -1039,10 +1044,6 @@ void __init mp_config_acpi_legacy_irqs(void) continue; /* IRQ already used */ } - mp_irqs[mp_irq_entries].mp_type = MP_INTSRC; - mp_irqs[mp_irq_entries].mp_irqflag = 0; /* Conforming */ - mp_irqs[mp_irq_entries].mp_srcbus = MP_ISA_BUS; - mp_irqs[mp_irq_entries].mp_dstapic = mp_ioapics[ioapic].mp_apicid; mp_irqs[mp_irq_entries].mp_irqtype = mp_INT; mp_irqs[mp_irq_entries].mp_srcbusirq = i; /* Identity mapped */ mp_irqs[mp_irq_entries].mp_dstirq = i; From bf62f3981c7076714e3b9f5fa6989a806cad02bf Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 20 May 2008 20:10:58 -0700 Subject: [PATCH 143/821] x86: move e820_mark_nosave_regions to e820.c and make e820_mark_nosave_regions to take limit_pfn to use max_low_pfn for 32bit and end_pfn for 64bit Signed-off-by: Yinghai Lu Cc: Andrew Morton Signed-off-by: Thomas Gleixner --- arch/x86/kernel/e820.c | 32 ++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_32.c | 32 -------------------------------- arch/x86/kernel/e820_64.c | 32 -------------------------------- arch/x86/kernel/setup_32.c | 2 +- arch/x86/kernel/setup_64.c | 2 +- include/asm-x86/e820.h | 9 +++++++++ include/asm-x86/e820_32.h | 8 -------- include/asm-x86/e820_64.h | 1 - 8 files changed, 43 insertions(+), 75 deletions(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 35da8cdbe5e6..0cd9132c9450 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -495,6 +496,37 @@ __init void e820_setup_gap(void) pci_mem_start, gapstart, gapsize); } +#if defined(CONFIG_X86_64) || \ + (defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION)) +/** + * Find the ranges of physical addresses that do not correspond to + * e820 RAM areas and mark the corresponding pages as nosave for + * hibernation (32 bit) or software suspend and suspend to RAM (64 bit). + * + * This function requires the e820 map to be sorted and without any + * overlapping entries and assumes the first e820 area to be RAM. + */ +void __init e820_mark_nosave_regions(unsigned long limit_pfn) +{ + int i; + unsigned long pfn; + + pfn = PFN_DOWN(e820.map[0].addr + e820.map[0].size); + for (i = 1; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + + if (pfn < PFN_UP(ei->addr)) + register_nosave_region(pfn, PFN_UP(ei->addr)); + + pfn = PFN_DOWN(ei->addr + ei->size); + if (ei->type != E820_RAM) + register_nosave_region(PFN_UP(ei->addr), pfn); + + if (pfn >= limit_pfn) + break; + } +} +#endif /* * Early reserved memory areas. diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c index dfe25751038b..db760d4706af 100644 --- a/arch/x86/kernel/e820_32.c +++ b/arch/x86/kernel/e820_32.c @@ -9,7 +9,6 @@ #include #include #include -#include #include #include @@ -208,37 +207,6 @@ void __init init_iomem_resources(struct resource *code_resource, } } -#if defined(CONFIG_PM) && defined(CONFIG_HIBERNATION) -/** - * e820_mark_nosave_regions - Find the ranges of physical addresses that do not - * correspond to e820 RAM areas and mark the corresponding pages as nosave for - * hibernation. - * - * This function requires the e820 map to be sorted and without any - * overlapping entries and assumes the first e820 area to be RAM. - */ -void __init e820_mark_nosave_regions(void) -{ - int i; - unsigned long pfn; - - pfn = PFN_DOWN(e820.map[0].addr + e820.map[0].size); - for (i = 1; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - - if (pfn < PFN_UP(ei->addr)) - register_nosave_region(pfn, PFN_UP(ei->addr)); - - pfn = PFN_DOWN(ei->addr + ei->size); - if (ei->type != E820_RAM) - register_nosave_region(PFN_UP(ei->addr), pfn); - - if (pfn >= max_low_pfn) - break; - } -} -#endif - /* * Find the highest page frame number we have available */ diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 3b2e0b1bb49b..5e063e72b24a 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include @@ -93,37 +92,6 @@ void __init e820_reserve_resources(void) } } -/* - * Find the ranges of physical addresses that do not correspond to - * e820 RAM areas and mark the corresponding pages as nosave for software - * suspend and suspend to RAM. - * - * This function requires the e820 map to be sorted and without any - * overlapping entries and assumes the first e820 area to be RAM. - */ -void __init e820_mark_nosave_regions(void) -{ - int i; - unsigned long paddr; - - paddr = round_down(e820.map[0].addr + e820.map[0].size, PAGE_SIZE); - for (i = 1; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - - if (paddr < ei->addr) - register_nosave_region(PFN_DOWN(paddr), - PFN_UP(ei->addr)); - - paddr = round_down(ei->addr + ei->size, PAGE_SIZE); - if (ei->type != E820_RAM) - register_nosave_region(PFN_UP(ei->addr), - PFN_DOWN(paddr)); - - if (paddr >= (end_pfn << PAGE_SHIFT)) - break; - } -} - /* * Finds an active region in the address range from start_pfn to last_pfn and * returns its range in ei_startpfn and ei_endpfn for the e820 entry. diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 3c451d143eba..e1173aecf69a 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -820,7 +820,7 @@ void __init setup_arch(char **cmdline_p) #endif e820_setup_gap(); - e820_mark_nosave_regions(); + e820_mark_nosave_regions(max_low_pfn); #ifdef CONFIG_VT #if defined(CONFIG_VGA_CONSOLE) diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 6dff1286ad8a..975a5da46e49 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -516,7 +516,7 @@ void __init setup_arch(char **cmdline_p) * We trust e820 completely. No explicit ROM probing in memory. */ e820_reserve_resources(); - e820_mark_nosave_regions(); + e820_mark_nosave_regions(end_pfn); /* request I/O space for devices used on all i[345]86 PCs */ for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++) diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h index 5a58e2bb1d78..4266a2c5f2e8 100644 --- a/include/asm-x86/e820.h +++ b/include/asm-x86/e820.h @@ -70,6 +70,15 @@ extern u64 update_memory_range(u64 start, u64 size, unsigned old_type, extern void update_e820(void); extern void e820_setup_gap(void); +#if defined(CONFIG_X86_64) || \ + (defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION)) +extern void e820_mark_nosave_regions(unsigned long limit_pfn); +#else +static inline void e820_mark_nosave_regions(unsigned long limit_pfn) +{ +} +#endif + extern u64 find_e820_area(u64 start, u64 end, u64 size, u64 align); extern u64 find_e820_area_size(u64 start, u64 *sizep, u64 align); extern void reserve_early(u64 start, u64 end, char *name); diff --git a/include/asm-x86/e820_32.h b/include/asm-x86/e820_32.h index 9576b438fbd9..7ace82570a36 100644 --- a/include/asm-x86/e820_32.h +++ b/include/asm-x86/e820_32.h @@ -28,13 +28,5 @@ extern void init_iomem_resources(struct resource *code_resource, struct resource *data_resource, struct resource *bss_resource); -#if defined(CONFIG_PM) && defined(CONFIG_HIBERNATION) -extern void e820_mark_nosave_regions(void); -#else -static inline void e820_mark_nosave_regions(void) -{ -} -#endif - #endif/*!__ASSEMBLY__*/ #endif/*__E820_HEADER*/ diff --git a/include/asm-x86/e820_64.h b/include/asm-x86/e820_64.h index 37f176a02bc6..917963ccab69 100644 --- a/include/asm-x86/e820_64.h +++ b/include/asm-x86/e820_64.h @@ -18,7 +18,6 @@ extern void setup_memory_region(void); extern void contig_e820_setup(void); extern unsigned long e820_end_of_ram(void); extern void e820_reserve_resources(void); -extern void e820_mark_nosave_regions(void); extern int e820_any_non_reserved(unsigned long start, unsigned long end); extern int is_memory_any_valid(unsigned long start, unsigned long end); extern int e820_all_non_reserved(unsigned long start, unsigned long end); From b3e2416465bc9140bfd209f247e6a789f68f0d19 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 23 May 2008 01:54:44 +0400 Subject: [PATCH 144/821] x86: Set pic_mode only if local apic code is present --- arch/x86/kernel/mpparse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 59f051db236d..e61523a13ecd 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -609,7 +609,7 @@ static void __init __get_smp_config(unsigned early) printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification); -#ifdef CONFIG_X86_32 +#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32) if (mpf->mpf_feature2 & (1 << 7)) { printk(KERN_INFO " IMCR and PIC compatibility mode.\n"); pic_mode = 1; From f3918352909f839a7b0dbf9b3f81d2e183c46f88 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 23 May 2008 01:54:51 +0400 Subject: [PATCH 145/821] x86: move pic_mode to apic_32.c --- arch/x86/kernel/apic_32.c | 2 ++ arch/x86/kernel/mpparse.c | 2 -- arch/x86/mach-visws/mpparse.c | 2 -- 3 files changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index fa1be1d62916..848c603457fe 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -76,6 +76,8 @@ EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); */ int apic_verbosity; +int pic_mode; + static unsigned int calibration_result; static int lapic_next_event(unsigned long delta, diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index e61523a13ecd..b72c04602ad2 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -48,8 +48,6 @@ int mp_bus_id_to_pci_bus[MAX_MP_BUSSES] = {[0 ... MAX_MP_BUSSES - 1] = -1 }; static int mp_current_pci_id; -int pic_mode; - /* * Intel MP BIOS table parsing routines: */ diff --git a/arch/x86/mach-visws/mpparse.c b/arch/x86/mach-visws/mpparse.c index 57484e91ab90..b7d063e7de1f 100644 --- a/arch/x86/mach-visws/mpparse.c +++ b/arch/x86/mach-visws/mpparse.c @@ -11,8 +11,6 @@ /* Have we found an MP table */ int smp_found_config; -int pic_mode; - extern unsigned int __cpuinitdata maxcpus; /* From bab4b27c00c4880737c18bb91138b1a7dd94164c Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Mon, 19 May 2008 19:47:03 +0400 Subject: [PATCH 146/821] x86: move smp_found_config --- arch/x86/kernel/apic_32.c | 3 +++ arch/x86/kernel/apic_64.c | 3 +++ arch/x86/kernel/mpparse.c | 8 ++++---- arch/x86/mach-visws/mpparse.c | 5 ++--- arch/x86/mach-voyager/voyager_smp.c | 5 ----- 5 files changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 848c603457fe..c304759f0834 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -78,6 +78,9 @@ int apic_verbosity; int pic_mode; +/* Have we found an MP table */ +int smp_found_config; + static unsigned int calibration_result; static int lapic_next_event(unsigned long delta, diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index 5910020c3f24..54087f920f2f 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -56,6 +56,9 @@ EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); */ int apic_verbosity; +/* Have we found an MP table */ +int smp_found_config; + static struct resource lapic_resource = { .name = "Local APIC", .flags = IORESOURCE_MEM | IORESOURCE_BUSY, diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index b72c04602ad2..d67cd7600a21 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -32,9 +32,6 @@ #include #endif -/* Have we found an MP table */ -int smp_found_config; - /* * Various Linux-internal data structures created from the * MP-table. @@ -639,7 +636,9 @@ static void __init __get_smp_config(unsigned early) * override the defaults. */ if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr), early)) { +#ifdef CONFIG_X86_LOCAL_APIC smp_found_config = 0; +#endif printk(KERN_ERR "BIOS bug, MP table errors detected!...\n"); printk(KERN_ERR "... disabling SMP support. " @@ -706,8 +705,9 @@ static int __init smp_scan_config(unsigned long base, unsigned long length, !mpf_checksum((unsigned char *)bp, 16) && ((mpf->mpf_specification == 1) || (mpf->mpf_specification == 4))) { - +#ifdef CONFIG_X86_LOCAL_APIC smp_found_config = 1; +#endif mpf_found = mpf; #ifdef CONFIG_X86_32 printk(KERN_INFO "found SMP MP-table at [%p] %08lx\n", diff --git a/arch/x86/mach-visws/mpparse.c b/arch/x86/mach-visws/mpparse.c index b7d063e7de1f..a2fb78c0d154 100644 --- a/arch/x86/mach-visws/mpparse.c +++ b/arch/x86/mach-visws/mpparse.c @@ -8,9 +8,6 @@ #include "cobalt.h" #include "mach_apic.h" -/* Have we found an MP table */ -int smp_found_config; - extern unsigned int __cpuinitdata maxcpus; /* @@ -74,7 +71,9 @@ void __init find_smp_config(void) if (ncpus > maxcpus) ncpus = maxcpus; +#ifdef CONFIG_X86_LOCAL_APIC smp_found_config = 1; +#endif while (ncpus--) MP_processor_info(mp++); diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c index 7bbebbfe8c4e..8dedd01e909f 100644 --- a/arch/x86/mach-voyager/voyager_smp.c +++ b/arch/x86/mach-voyager/voyager_smp.c @@ -59,11 +59,6 @@ __u32 voyager_quad_processors = 0; * activity count. Finally exported by i386_ksyms.c */ static int voyager_extended_cpus = 1; -/* Have we found an SMP box - used by time.c to do the profiling - interrupt for timeslicing; do not set to 1 until the per CPU timer - interrupt is active */ -int smp_found_config = 0; - /* Used for the invalidate map that's also checked in the spinlock */ static volatile unsigned long smp_invalidate_needed; From ce6444d39fdea29dcf145d2d95fe9cdc850aa53c Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Mon, 19 May 2008 19:47:09 +0400 Subject: [PATCH 147/821] x86: mp_bus_id_to_pci_bus is not needed --- arch/x86/kernel/io_apic_32.c | 2 +- arch/x86/kernel/io_apic_64.c | 2 +- arch/x86/kernel/mpparse.c | 10 ---------- include/asm-x86/mpspec.h | 2 -- 4 files changed, 2 insertions(+), 14 deletions(-) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index ea68c3e5ba1d..17b2e8f862d3 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -864,7 +864,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, " "slot:%d, pin:%d.\n", bus, slot, pin); - if (mp_bus_id_to_pci_bus[bus] == -1) { + if (test_bit(bus, mp_bus_not_pci)) { printk(KERN_WARNING "PCI BIOS passed nonexistent PCI bus %d!\n", bus); return -1; } diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index e7f1476ed537..9637675ea555 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -516,7 +516,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n", bus, slot, pin); - if (mp_bus_id_to_pci_bus[bus] == -1) { + if (test_bit(bus, mp_bus_not_pci)) { apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus); return -1; } diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index d67cd7600a21..83dfd6696c2a 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -41,13 +41,6 @@ int mp_bus_id_to_type[MAX_MP_BUSSES]; #endif DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); -int mp_bus_id_to_pci_bus[MAX_MP_BUSSES] = {[0 ... MAX_MP_BUSSES - 1] = -1 }; - -static int mp_current_pci_id; - -/* - * Intel MP BIOS table parsing routines: - */ /* * Checksum an MP configuration block. @@ -101,7 +94,6 @@ static void __cpuinit MP_processor_info(struct mpc_config_processor *m) static void __init MP_bus_info(struct mpc_config_bus *m) { char str[7]; - memcpy(str, m->mpc_bustype, 6); str[6] = 0; @@ -130,8 +122,6 @@ static void __init MP_bus_info(struct mpc_config_bus *m) mpc_oem_pci_bus(m, translation_table[mpc_record]); #endif clear_bit(m->mpc_busid, mp_bus_not_pci); - mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id; - mp_current_pci_id++; #if defined(CONFIG_EISA) || defined (CONFIG_MCA) mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI; } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) { diff --git a/include/asm-x86/mpspec.h b/include/asm-x86/mpspec.h index 57a991b9c053..b785ddd8d761 100644 --- a/include/asm-x86/mpspec.h +++ b/include/asm-x86/mpspec.h @@ -32,8 +32,6 @@ extern int mp_bus_id_to_type[MAX_MP_BUSSES]; extern DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); -extern int mp_bus_id_to_pci_bus[MAX_MP_BUSSES]; - extern unsigned int boot_cpu_physical_apicid; extern int smp_found_config; extern int mpc_default_type; From 8732fc4b237fca3bd3cb0ec87ca8fb90271b0baf Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Mon, 19 May 2008 19:47:16 +0400 Subject: [PATCH 148/821] x86: move mp_bus_not_pci from mpparse.c --- arch/x86/kernel/io_apic_32.c | 6 ++++++ arch/x86/kernel/io_apic_64.c | 2 ++ arch/x86/kernel/mpparse.c | 10 ---------- 3 files changed, 8 insertions(+), 10 deletions(-) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 17b2e8f862d3..2285b81ad1d5 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -81,6 +81,12 @@ struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; /* # of MP IRQ source entries */ int mp_irq_entries; +#if defined (CONFIG_MCA) || defined (CONFIG_EISA) +int mp_bus_id_to_type[MAX_MP_BUSSES]; +#endif + +DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); + static int disable_timer_pin_1 __initdata; /* diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 9637675ea555..339cf6f926dc 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -113,6 +113,8 @@ struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; /* # of MP IRQ source entries */ int mp_irq_entries; +DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); + /* * Rough estimation of how many shared IRQs there are, can * be changed anytime. diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 83dfd6696c2a..e8e041ed84d6 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -32,16 +32,6 @@ #include #endif -/* - * Various Linux-internal data structures created from the - * MP-table. - */ -#if defined (CONFIG_MCA) || defined (CONFIG_EISA) -int mp_bus_id_to_type[MAX_MP_BUSSES]; -#endif - -DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); - /* * Checksum an MP configuration block. */ From 136ef671df04dc157afa0d4b96c7bd23ba072c9c Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Tue, 20 May 2008 00:29:59 +0400 Subject: [PATCH 149/821] x86: allow MPPARSE to be deselected in SMP configs --- arch/x86/Kconfig.debug | 2 +- arch/x86/kernel/setup_32.c | 2 +- arch/x86/kernel/setup_64.c | 4 ++++ 3 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index ac1e31ba4795..d5b364b43a02 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -127,7 +127,7 @@ config 4KSTACKS config X86_FIND_SMP_CONFIG def_bool y - depends on X86_LOCAL_APIC || X86_VOYAGER + depends on X86_MPPARSE || X86_VOYAGER || X86_VISWS depends on X86_32 config X86_MPPARSE diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index e1173aecf69a..c04e8c91daf7 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -814,7 +814,7 @@ void __init setup_arch(char **cmdline_p) "CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n"); #endif #endif -#ifdef CONFIG_X86_LOCAL_APIC +#if defined(CONFIG_X86_MPPARSE) || defined(CONFIG_X86_VISWS) if (smp_found_config) get_smp_config(); #endif diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 975a5da46e49..89e6cca5d693 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -456,10 +456,12 @@ void __init setup_arch(char **cmdline_p) if (efi_enabled) efi_reserve_bootmem(); +#ifdef CONFIG_X86_MPPARSE /* * Find and reserve possible boot-time SMP configuration: */ find_smp_config(); +#endif #ifdef CONFIG_BLK_DEV_INITRD if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) { unsigned long ramdisk_image = boot_params.hdr.ramdisk_image; @@ -502,11 +504,13 @@ void __init setup_arch(char **cmdline_p) init_cpu_to_node(); +#ifdef CONFIG_X86_MPPARSE /* * get boot-time SMP configuration: */ if (smp_found_config) get_smp_config(); +#endif init_apic_mappings(); ioapic_init_mappings(); From b764a15f679942a7bc9d4f9645299e1defcc5b43 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 22 May 2008 21:22:04 +0100 Subject: [PATCH 150/821] x86: Switch apm to unlocked_kernel This pushes the lock a fair way down and the final kill looks like it should be an easy project for someone who wants to have a shot at it. Signed-off-by: Alan Cox Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/apm_32.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index bf9290e29013..00e6d1370954 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -228,6 +228,7 @@ #include #include #include +#include #include #include @@ -1149,7 +1150,7 @@ static void queue_event(apm_event_t event, struct apm_user *sender) as->event_tail = 0; } as->events[as->event_head] = event; - if ((!as->suser) || (!as->writer)) + if (!as->suser || !as->writer) continue; switch (event) { case APM_SYS_SUSPEND: @@ -1396,7 +1397,7 @@ static void apm_mainloop(void) static int check_apm_user(struct apm_user *as, const char *func) { - if ((as == NULL) || (as->magic != APM_BIOS_MAGIC)) { + if (as == NULL || as->magic != APM_BIOS_MAGIC) { printk(KERN_ERR "apm: %s passed bad filp\n", func); return 1; } @@ -1459,18 +1460,19 @@ static unsigned int do_poll(struct file *fp, poll_table *wait) return 0; } -static int do_ioctl(struct inode *inode, struct file *filp, - u_int cmd, u_long arg) +static long do_ioctl(struct file *filp, u_int cmd, u_long arg) { struct apm_user *as; + int ret; as = filp->private_data; if (check_apm_user(as, "ioctl")) return -EIO; - if ((!as->suser) || (!as->writer)) + if (!as->suser || !as->writer) return -EPERM; switch (cmd) { case APM_IOC_STANDBY: + lock_kernel(); if (as->standbys_read > 0) { as->standbys_read--; as->standbys_pending--; @@ -1479,8 +1481,10 @@ static int do_ioctl(struct inode *inode, struct file *filp, queue_event(APM_USER_STANDBY, as); if (standbys_pending <= 0) standby(); + unlock_kernel(); break; case APM_IOC_SUSPEND: + lock_kernel(); if (as->suspends_read > 0) { as->suspends_read--; as->suspends_pending--; @@ -1488,16 +1492,17 @@ static int do_ioctl(struct inode *inode, struct file *filp, } else queue_event(APM_USER_SUSPEND, as); if (suspends_pending <= 0) { - return suspend(1); + ret = suspend(1); } else { as->suspend_wait = 1; wait_event_interruptible(apm_suspend_waitqueue, as->suspend_wait == 0); - return as->suspend_result; + ret = as->suspend_result; } - break; + unlock_kernel(); + return ret; default: - return -EINVAL; + return -ENOTTY; } return 0; } @@ -1860,7 +1865,7 @@ static const struct file_operations apm_bios_fops = { .owner = THIS_MODULE, .read = do_read, .poll = do_poll, - .ioctl = do_ioctl, + .unlocked_ioctl = do_ioctl, .open = do_open, .release = do_release, }; From 2e4db9d2c5db9c9dd3e1d1ec3263bc4a990ff8df Mon Sep 17 00:00:00 2001 From: Fernando Luis Vazquez Cao Date: Mon, 19 May 2008 14:23:44 -0700 Subject: [PATCH 151/821] x86: remove duplicate declaration of unknown_nmi_panic Signed-off-by: Fernando Luis Vazquez Cao Signed-off-by: Andrew Morton Signed-off-by: Thomas Gleixner --- include/asm-x86/nmi.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/asm-x86/nmi.h b/include/asm-x86/nmi.h index 1e363021e72f..8455bf36d8df 100644 --- a/include/asm-x86/nmi.h +++ b/include/asm-x86/nmi.h @@ -46,7 +46,6 @@ extern void nmi_watchdog_default(void); extern int check_nmi_watchdog(void); extern int nmi_watchdog_enabled; -extern int unknown_nmi_panic; extern int avail_to_resrv_perfctr_nmi_bit(unsigned int); extern int avail_to_resrv_perfctr_nmi(unsigned int); extern int reserve_perfctr_nmi(unsigned int); From 85cc35fa7255d113b5383a9c8536c363274bb475 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 25 May 2008 21:21:36 +0200 Subject: [PATCH 152/821] x86: fix mpparse fallout UP builds with LOCAL_APIC=y and IO_APIC=n fail with a missing reference to mp_bus_not_pci. Distangle the mpparse code some more and move the ioapic specific bus check into a separate function. This code needs sume urgent un#ifdef surgery all over the place. Signed-off-by: Thomas Gleixner --- arch/x86/kernel/mpparse.c | 73 ++++++++++++++++++++++----------------- 1 file changed, 41 insertions(+), 32 deletions(-) diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index e8e041ed84d6..9f3792d55044 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -81,6 +81,7 @@ static void __cpuinit MP_processor_info(struct mpc_config_processor *m) generic_processor_info(apicid, m->mpc_apicver); } +#ifdef CONFIG_X86_IO_APIC static void __init MP_bus_info(struct mpc_config_bus *m) { char str[7]; @@ -122,6 +123,7 @@ static void __init MP_bus_info(struct mpc_config_bus *m) } else printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str); } +#endif #ifdef CONFIG_X86_IO_APIC @@ -336,7 +338,9 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early) { struct mpc_config_bus *m = (struct mpc_config_bus *)mpt; +#ifdef CONFIG_X86_IO_APIC MP_bus_info(m); +#endif mpt += sizeof(*m); count += sizeof(*m); break; @@ -472,40 +476,11 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type) MP_intsrc_info(&intsrc); } -#endif -static inline void __init construct_default_ISA_mptable(int mpc_default_type) +static void construct_ioapic_table(int mpc_default_type) { - struct mpc_config_processor processor; - struct mpc_config_bus bus; -#ifdef CONFIG_X86_IO_APIC struct mpc_config_ioapic ioapic; -#endif - struct mpc_config_lintsrc lintsrc; - int linttypes[2] = { mp_ExtINT, mp_NMI }; - int i; - - /* - * local APIC has default address - */ - mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; - - /* - * 2 CPUs, numbered 0 & 1. - */ - processor.mpc_type = MP_PROCESSOR; - /* Either an integrated APIC or a discrete 82489DX. */ - processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; - processor.mpc_cpuflag = CPU_ENABLED; - processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | - (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask; - processor.mpc_featureflag = boot_cpu_data.x86_capability[0]; - processor.mpc_reserved[0] = 0; - processor.mpc_reserved[1] = 0; - for (i = 0; i < 2; i++) { - processor.mpc_apicid = i; - MP_processor_info(&processor); - } + struct mpc_config_bus bus; bus.mpc_type = MP_BUS; bus.mpc_busid = 0; @@ -534,7 +509,6 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type) MP_bus_info(&bus); } -#ifdef CONFIG_X86_IO_APIC ioapic.mpc_type = MP_IOAPIC; ioapic.mpc_apicid = 2; ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; @@ -546,7 +520,42 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type) * We set up most of the low 16 IO-APIC pins according to MPS rules. */ construct_default_ioirq_mptable(mpc_default_type); +} +#else +static inline void construct_ioapic_table(int mpc_default_type) { } #endif + +static inline void __init construct_default_ISA_mptable(int mpc_default_type) +{ + struct mpc_config_processor processor; + struct mpc_config_lintsrc lintsrc; + int linttypes[2] = { mp_ExtINT, mp_NMI }; + int i; + + /* + * local APIC has default address + */ + mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; + + /* + * 2 CPUs, numbered 0 & 1. + */ + processor.mpc_type = MP_PROCESSOR; + /* Either an integrated APIC or a discrete 82489DX. */ + processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; + processor.mpc_cpuflag = CPU_ENABLED; + processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | + (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask; + processor.mpc_featureflag = boot_cpu_data.x86_capability[0]; + processor.mpc_reserved[0] = 0; + processor.mpc_reserved[1] = 0; + for (i = 0; i < 2; i++) { + processor.mpc_apicid = i; + MP_processor_info(&processor); + } + + construct_ioapic_table(mpc_default_type); + lintsrc.mpc_type = MP_LINTSRC; lintsrc.mpc_irqflag = 0; /* conforming */ lintsrc.mpc_srcbusid = 0; From ddca03c98a7f7ad5ab09967ff52d4ed60358c896 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:31 +0400 Subject: [PATCH 153/821] x86: nmi - unify die_nmi() interface By slightly changing 32bit mode die_nmi() we may unify the interface and make it common for both (32/64bit) modes Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_32.c | 7 +++---- arch/x86/kernel/traps_32.c | 8 +++++--- include/asm-x86/nmi.h | 2 +- 3 files changed, 9 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index 69bdae555c18..bd04a28f7a5c 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -320,8 +320,6 @@ void touch_nmi_watchdog(void) } EXPORT_SYMBOL(touch_nmi_watchdog); -extern void die_nmi(struct pt_regs *, const char *msg); - notrace __kprobes int nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) { @@ -375,7 +373,8 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) /* * die_nmi will return ONLY if NOTIFY_STOP happens.. */ - die_nmi(regs, "BUG: NMI Watchdog detected LOCKUP"); + die_nmi("BUG: NMI Watchdog detected LOCKUP", + regs, 0); } else { __get_cpu_var(last_irq_sum) = sum; local_set(&__get_cpu_var(alert_counter), 0); @@ -406,7 +405,7 @@ static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) char buf[64]; sprintf(buf, "NMI received for unknown reason %02x\n", reason); - die_nmi(regs, buf); + die_nmi(buf, regs, 0); return 0; } diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c index bde6f63e15d5..f31e6651fa6f 100644 --- a/arch/x86/kernel/traps_32.c +++ b/arch/x86/kernel/traps_32.c @@ -755,9 +755,9 @@ unknown_nmi_error(unsigned char reason, struct pt_regs *regs) static DEFINE_SPINLOCK(nmi_print_lock); -void notrace __kprobes die_nmi(struct pt_regs *regs, const char *msg) +void notrace __kprobes die_nmi(char *str, struct pt_regs *regs, int do_panic) { - if (notify_die(DIE_NMIWATCHDOG, msg, regs, 0, 2, SIGINT) == NOTIFY_STOP) + if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, 2, SIGINT) == NOTIFY_STOP) return; spin_lock(&nmi_print_lock); @@ -766,10 +766,12 @@ void notrace __kprobes die_nmi(struct pt_regs *regs, const char *msg) * to get a message out: */ bust_spinlocks(1); - printk(KERN_EMERG "%s", msg); + printk(KERN_EMERG "%s", str); printk(" on CPU%d, ip %08lx, registers:\n", smp_processor_id(), regs->ip); show_registers(regs); + if (do_panic) + panic("Non maskable interrupt"); console_silent(); spin_unlock(&nmi_print_lock); bust_spinlocks(0); diff --git a/include/asm-x86/nmi.h b/include/asm-x86/nmi.h index 8455bf36d8df..7cd5b6a88138 100644 --- a/include/asm-x86/nmi.h +++ b/include/asm-x86/nmi.h @@ -38,12 +38,12 @@ static inline void unset_nmi_pm_callback(struct pm_dev *dev) #ifdef CONFIG_X86_64 extern void default_do_nmi(struct pt_regs *); -extern void die_nmi(char *str, struct pt_regs *regs, int do_panic); extern void nmi_watchdog_default(void); #else #define nmi_watchdog_default() do {} while (0) #endif +extern void die_nmi(char *str, struct pt_regs *regs, int do_panic); extern int check_nmi_watchdog(void); extern int nmi_watchdog_enabled; extern int avail_to_resrv_perfctr_nmi_bit(unsigned int); From e56b3a12c45e439169f2d1f7194be397667320a6 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:32 +0400 Subject: [PATCH 154/821] x86: nmi - die_nmi() output message unification Make 64bit die_nmi() to produce the same message as 32bit mode has Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_64.c | 4 ++-- arch/x86/kernel/traps_64.c | 4 +++- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index 33cb8ecbb6dd..1a98705270a2 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -358,8 +358,8 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) */ local_inc(&__get_cpu_var(alert_counter)); if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) - die_nmi("NMI Watchdog detected LOCKUP on CPU %d\n", regs, - panic_on_timeout); + die_nmi("NMI Watchdog detected LOCKUP", + regs, panic_on_timeout); } else { __get_cpu_var(last_irq_sum) = sum; local_set(&__get_cpu_var(alert_counter), 0); diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c index adff76ea97c4..6a048ce3c787 100644 --- a/arch/x86/kernel/traps_64.c +++ b/arch/x86/kernel/traps_64.c @@ -614,7 +614,9 @@ die_nmi(char *str, struct pt_regs *regs, int do_panic) * We are in trouble anyway, lets at least try * to get a message out. */ - printk(str, smp_processor_id()); + printk(KERN_EMERG "%s", str); + printk(" on CPU%d, ip %08lx, registers:\n", + smp_processor_id(), regs->ip); show_registers(regs); if (kexec_should_crash(current)) crash_kexec(regs); From c6425b9f143a75bbcd0a7684b4df40e20d0b2f32 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:33 +0400 Subject: [PATCH 155/821] x86: move do_nmi(), stop_nmi() and restart_nmi() to traps_64.c traps_32.c already holds these functions so do the same for traps_64.c Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_64.c | 25 ------------------------- arch/x86/kernel/traps_64.c | 24 ++++++++++++++++++++++++ 2 files changed, 24 insertions(+), 25 deletions(-) diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index 1a98705270a2..c1ea671525e5 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -30,7 +30,6 @@ int unknown_nmi_panic; int nmi_watchdog_enabled; -int panic_on_unrecovered_nmi; static cpumask_t backtrace_mask = CPU_MASK_NONE; @@ -383,30 +382,6 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) return rc; } -static unsigned ignore_nmis; - -asmlinkage notrace __kprobes void -do_nmi(struct pt_regs *regs, long error_code) -{ - nmi_enter(); - add_pda(__nmi_count,1); - if (!ignore_nmis) - default_do_nmi(regs); - nmi_exit(); -} - -void stop_nmi(void) -{ - acpi_nmi_disable(); - ignore_nmis++; -} - -void restart_nmi(void) -{ - ignore_nmis--; - acpi_nmi_enable(); -} - #ifdef CONFIG_SYSCTL static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c index 6a048ce3c787..e4a380797dc1 100644 --- a/arch/x86/kernel/traps_64.c +++ b/arch/x86/kernel/traps_64.c @@ -76,7 +76,9 @@ asmlinkage void alignment_check(void); asmlinkage void machine_check(void); asmlinkage void spurious_interrupt_bug(void); +int panic_on_unrecovered_nmi; static unsigned int code_bytes = 64; +static unsigned ignore_nmis; static inline void conditional_sti(struct pt_regs *regs) { @@ -867,6 +869,28 @@ asmlinkage notrace __kprobes void default_do_nmi(struct pt_regs *regs) io_check_error(reason, regs); } +asmlinkage notrace __kprobes void +do_nmi(struct pt_regs *regs, long error_code) +{ + nmi_enter(); + add_pda(__nmi_count, 1); + if (!ignore_nmis) + default_do_nmi(regs); + nmi_exit(); +} + +void stop_nmi(void) +{ + acpi_nmi_disable(); + ignore_nmis++; +} + +void restart_nmi(void) +{ + ignore_nmis--; + acpi_nmi_enable(); +} + /* runs on IST stack. */ asmlinkage void __kprobes do_int3(struct pt_regs * regs, long error_code) { From d1b946b97d71423f365fa797d1428e1847c0bec1 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:34 +0400 Subject: [PATCH 156/821] x86: nmi_32.c - add "panic" option Allow to pass "panic" option in 32bit mode Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_32.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index bd04a28f7a5c..4437fe1edabc 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -42,6 +42,7 @@ static cpumask_t backtrace_mask = CPU_MASK_NONE; * 0: the lapic NMI watchdog is disabled, but can be enabled */ atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ +static int panic_on_timeout; unsigned int nmi_watchdog = NMI_DEFAULT; static unsigned int nmi_hz = HZ; @@ -140,6 +141,14 @@ static int __init setup_nmi_watchdog(char *str) { int nmi; + if (!strncmp(str, "panic", 5)) { + panic_on_timeout = 1; + str = strchr(str, ','); + if (!str) + return 1; + ++str; + } + get_option(&str, &nmi); if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE)) @@ -374,7 +383,7 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) * die_nmi will return ONLY if NOTIFY_STOP happens.. */ die_nmi("BUG: NMI Watchdog detected LOCKUP", - regs, 0); + regs, panic_on_timeout); } else { __get_cpu_var(last_irq_sum) = sum; local_set(&__get_cpu_var(alert_counter), 0); From 4b82b277707a39b97271439c475f186f63ec4692 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:35 +0400 Subject: [PATCH 157/821] x86: nmi_32.c - add nmi_watchdog_default helper Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_32.c | 19 +++++++++++++------ include/asm-x86/nmi.h | 4 +--- 2 files changed, 14 insertions(+), 9 deletions(-) diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index 4437fe1edabc..7714e8478213 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -51,6 +51,17 @@ static DEFINE_PER_CPU(short, wd_enabled); static int endflag __initdata = 0; +/* Run after command line and cpu_init init, but before all other checks */ +void nmi_watchdog_default(void) +{ + if (nmi_watchdog != NMI_DEFAULT) + return; + if (lapic_watchdog_ok()) + nmi_watchdog = NMI_LOCAL_APIC; + else + nmi_watchdog = NMI_IO_APIC; +} + #ifdef CONFIG_SMP /* The performance counters used by NMI_LOCAL_APIC don't trigger when * the CPU is idle. To make sure the NMI watchdog really ticks on all @@ -437,12 +448,8 @@ int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, return -EIO; } - if (nmi_watchdog == NMI_DEFAULT) { - if (lapic_watchdog_ok()) - nmi_watchdog = NMI_LOCAL_APIC; - else - nmi_watchdog = NMI_IO_APIC; - } + /* if nmi_watchdog is not set yet, then set it */ + nmi_watchdog_default(); if (nmi_watchdog == NMI_LOCAL_APIC) { if (nmi_watchdog_enabled) diff --git a/include/asm-x86/nmi.h b/include/asm-x86/nmi.h index 7cd5b6a88138..1e8f34d7ab68 100644 --- a/include/asm-x86/nmi.h +++ b/include/asm-x86/nmi.h @@ -38,11 +38,9 @@ static inline void unset_nmi_pm_callback(struct pm_dev *dev) #ifdef CONFIG_X86_64 extern void default_do_nmi(struct pt_regs *); -extern void nmi_watchdog_default(void); -#else -#define nmi_watchdog_default() do {} while (0) #endif +extern void nmi_watchdog_default(void); extern void die_nmi(char *str, struct pt_regs *regs, int do_panic); extern int check_nmi_watchdog(void); extern int nmi_watchdog_enabled; From ad63ba169d45ccb6594eb35a6c31c421fe70ff45 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:36 +0400 Subject: [PATCH 158/821] x86: nmi_32/64.c - use apic_write_around instead of apic_write apic_write_around will be expanded to apic_write in 64bit mode anyway. Only a few CPUs (well, old CPUs to be precise) requires such an action. In general it should not hurt and could be cleaned up for apic_write (just in case) Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_32.c | 2 +- arch/x86/kernel/nmi_64.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index 7714e8478213..ec5842b4dd68 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -248,7 +248,7 @@ void acpi_nmi_enable(void) static void __acpi_nmi_disable(void *__unused) { - apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); + apic_write_around(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); } /* diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index c1ea671525e5..f546e3164a74 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -215,7 +215,7 @@ late_initcall(init_lapic_nmi_sysfs); static void __acpi_nmi_enable(void *__unused) { - apic_write(APIC_LVT0, APIC_DM_NMI); + apic_write_around(APIC_LVT0, APIC_DM_NMI); } /* @@ -229,7 +229,7 @@ void acpi_nmi_enable(void) static void __acpi_nmi_disable(void *__unused) { - apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); + apic_write_around(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); } /* From 6c8decdf14b17d42f6eb817d310642f4d6598a19 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:37 +0400 Subject: [PATCH 159/821] x86: nmi_32.c - unknown_nmi_panic_callback should always panic Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index ec5842b4dd68..d0b0684bde9e 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -425,7 +425,7 @@ static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) char buf[64]; sprintf(buf, "NMI received for unknown reason %02x\n", reason); - die_nmi(buf, regs, 0); + die_nmi(buf, regs, 1); /* Always panic here */ return 0; } From 96f9dcb10755e96eae706b9e869c0dc25adb3d74 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:38 +0400 Subject: [PATCH 160/821] x86: nmi_64.c - use for_each_possible_cpu helper Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index f546e3164a74..d98b21cd4928 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -98,7 +98,7 @@ int __init check_nmi_watchdog(void) smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0); #endif - for (cpu = 0; cpu < NR_CPUS; cpu++) + for_each_possible_cpu(cpu) prev_nmi_count[cpu] = cpu_pda(cpu)->__nmi_count; local_irq_enable(); mdelay((20*1000)/nmi_hz); // wait 20 ticks From 7c2ba83f9a479eee6f302147767a30f3187fbd4b Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:39 +0400 Subject: [PATCH 161/821] x86: nmi_32.c cleanup - use for_each_online_cpu helper Since cpu_online_map is touched (by for_each_online_cpu) at moment when cpu_callin_map is already filled up we can get rid of its checking at all Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_32.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index d0b0684bde9e..c6d0777aaf90 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -108,13 +108,7 @@ int __init check_nmi_watchdog(void) local_irq_enable(); mdelay((20*1000)/nmi_hz); // wait 20 ticks - for_each_possible_cpu(cpu) { -#ifdef CONFIG_SMP - /* Check cpu_callin_map here because that is set - after the timer is started. */ - if (!cpu_isset(cpu, cpu_callin_map)) - continue; -#endif + for_each_online_cpu(cpu) { if (!per_cpu(wd_enabled, cpu)) continue; if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { From fd5cea02de100197a4c26d9e103508cf09b50a82 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:40 +0400 Subject: [PATCH 162/821] x86: nmi_32/64.c - add helper functions to hide arch specific data Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_32.c | 44 +++++++++++++++++++++++++++++----------- arch/x86/kernel/nmi_64.c | 42 ++++++++++++++++++++++++++++---------- 2 files changed, 63 insertions(+), 23 deletions(-) diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index c6d0777aaf90..a94dbedf2b74 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -51,6 +51,26 @@ static DEFINE_PER_CPU(short, wd_enabled); static int endflag __initdata = 0; +static inline unsigned int get_nmi_count(int cpu) +{ + return nmi_count(cpu); +} + +static inline int mce_in_progress(void) +{ + return 0; +} + +/* + * Take the local apic timer and PIT/HPET into account. We don't + * know which one is active, when we have highres/dyntick on + */ +static inline unsigned int get_timer_irqs(int cpu) +{ + return per_cpu(irq_stat, cpu).apic_timer_irqs + + per_cpu(irq_stat, cpu).irq0_irqs; +} + /* Run after command line and cpu_init init, but before all other checks */ void nmi_watchdog_default(void) { @@ -104,19 +124,19 @@ int __init check_nmi_watchdog(void) #endif for_each_possible_cpu(cpu) - prev_nmi_count[cpu] = nmi_count(cpu); + prev_nmi_count[cpu] = get_nmi_count(cpu); local_irq_enable(); mdelay((20*1000)/nmi_hz); // wait 20 ticks for_each_online_cpu(cpu) { if (!per_cpu(wd_enabled, cpu)) continue; - if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { + if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { printk(KERN_WARNING "WARNING: CPU#%d: NMI " "appears to be stuck (%d->%d)!\n", cpu, prev_nmi_count[cpu], - nmi_count(cpu)); + get_nmi_count(cpu)); per_cpu(wd_enabled, cpu) = 0; atomic_dec(&nmi_active); } @@ -355,6 +375,13 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) touched = 1; } + sum = get_timer_irqs(cpu); + + if (__get_cpu_var(nmi_touch)) { + __get_cpu_var(nmi_touch) = 0; + touched = 1; + } + if (cpu_isset(cpu, backtrace_mask)) { static DEFINE_SPINLOCK(lock); /* Serialise the printks */ @@ -365,16 +392,9 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) cpu_clear(cpu, backtrace_mask); } - /* - * Take the local apic timer and PIT/HPET into account. We don't - * know which one is active, when we have highres/dyntick on - */ - sum = per_cpu(irq_stat, cpu).apic_timer_irqs + - per_cpu(irq_stat, cpu).irq0_irqs; - if (__get_cpu_var(nmi_touch)) { - __get_cpu_var(nmi_touch) = 0; + /* Could check oops_in_progress here too, but it's safer not to */ + if (mce_in_progress()) touched = 1; - } /* if the none of the timers isn't firing, this cpu isn't doing much */ if (!touched && __get_cpu_var(last_irq_sum) == sum) { diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index d98b21cd4928..c6802447262c 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -47,6 +47,30 @@ static unsigned int nmi_hz = HZ; static DEFINE_PER_CPU(short, wd_enabled); +static int endflag __initdata = 0; + +static inline unsigned int get_nmi_count(int cpu) +{ + return cpu_pda(cpu)->__nmi_count; +} + +static inline int mce_in_progress(void) +{ +#ifdef CONFIG_X86_MCE + return atomic_read(&mce_entry) > 0; +#endif + return 0; +} + +/* + * Take the local apic timer and PIT/HPET into account. We don't + * know which one is active, when we have highres/dyntick on + */ +static inline unsigned int get_timer_irqs(int cpu) +{ + return read_pda(apic_timer_irqs) + read_pda(irq0_irqs); +} + /* Run after command line and cpu_init init, but before all other checks */ void nmi_watchdog_default(void) { @@ -55,8 +79,6 @@ void nmi_watchdog_default(void) nmi_watchdog = NMI_NONE; } -static int endflag __initdata = 0; - #ifdef CONFIG_SMP /* The performance counters used by NMI_LOCAL_APIC don't trigger when * the CPU is idle. To make sure the NMI watchdog really ticks on all @@ -99,19 +121,19 @@ int __init check_nmi_watchdog(void) #endif for_each_possible_cpu(cpu) - prev_nmi_count[cpu] = cpu_pda(cpu)->__nmi_count; + prev_nmi_count[cpu] = get_nmi_count(cpu); local_irq_enable(); mdelay((20*1000)/nmi_hz); // wait 20 ticks for_each_online_cpu(cpu) { if (!per_cpu(wd_enabled, cpu)) continue; - if (cpu_pda(cpu)->__nmi_count - prev_nmi_count[cpu] <= 5) { + if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { printk(KERN_WARNING "WARNING: CPU#%d: NMI " "appears to be stuck (%d->%d)!\n", cpu, prev_nmi_count[cpu], - cpu_pda(cpu)->__nmi_count); + get_nmi_count(cpu)); per_cpu(wd_enabled, cpu) = 0; atomic_dec(&nmi_active); } @@ -327,7 +349,8 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) touched = 1; } - sum = read_pda(apic_timer_irqs) + read_pda(irq0_irqs); + sum = get_timer_irqs(cpu); + if (__get_cpu_var(nmi_touch)) { __get_cpu_var(nmi_touch) = 0; touched = 1; @@ -343,12 +366,9 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) cpu_clear(cpu, backtrace_mask); } -#ifdef CONFIG_X86_MCE - /* Could check oops_in_progress here too, but it's safer - not too */ - if (atomic_read(&mce_entry) > 0) + if (mce_in_progress()) touched = 1; -#endif + /* if the apic timer isn't firing, this cpu isn't doing much */ if (!touched && __get_cpu_var(last_irq_sum) == sum) { /* From 1798bc22b2790bf2a956588e6b17c36ef79ceff7 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:41 +0400 Subject: [PATCH 163/821] x86: nmi_32/64.c - merge down nmi_32.c and nmi_64.c to nmi.c Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/{nmi_32.c => nmi.c} | 103 +++--- arch/x86/kernel/nmi_64.c | 477 ---------------------------- 3 files changed, 66 insertions(+), 516 deletions(-) rename arch/x86/kernel/{nmi_32.c => nmi.c} (85%) delete mode 100644 arch/x86/kernel/nmi_64.c diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 5e618c3b4720..d5dd6668225f 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -53,7 +53,7 @@ obj-$(CONFIG_X86_32_SMP) += smpcommon.o obj-$(CONFIG_X86_64_SMP) += tsc_sync.o smpcommon.o obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_$(BITS).o obj-$(CONFIG_X86_MPPARSE) += mpparse.o -obj-$(CONFIG_X86_LOCAL_APIC) += apic_$(BITS).o nmi_$(BITS).o +obj-$(CONFIG_X86_LOCAL_APIC) += apic_$(BITS).o nmi.o obj-$(CONFIG_X86_IO_APIC) += io_apic_$(BITS).o obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o obj-$(CONFIG_KEXEC) += machine_kexec_$(BITS).o diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi.c similarity index 85% rename from arch/x86/kernel/nmi_32.c rename to arch/x86/kernel/nmi.c index a94dbedf2b74..69a839fc1eb0 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi.c @@ -11,10 +11,11 @@ * Mikael Pettersson : PM converted to driver model. Disable/enable API. */ +#include +#include #include #include #include -#include #include #include #include @@ -22,13 +23,15 @@ #include #include #include -#include #include #include +#include #include -#include "mach_traps.h" +#include + +#include int unknown_nmi_panic; int nmi_watchdog_enabled; @@ -45,19 +48,25 @@ atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ static int panic_on_timeout; unsigned int nmi_watchdog = NMI_DEFAULT; + static unsigned int nmi_hz = HZ; - static DEFINE_PER_CPU(short, wd_enabled); - static int endflag __initdata = 0; static inline unsigned int get_nmi_count(int cpu) { +#ifdef CONFIG_X86_64 + return cpu_pda(cpu)->__nmi_count; +#else return nmi_count(cpu); +#endif } static inline int mce_in_progress(void) { +#if defined(CONFIX_X86_64) && defined(CONFIG_X86_MCE) + return atomic_read(&mce_entry) > 0; +#endif return 0; } @@ -67,8 +76,12 @@ static inline int mce_in_progress(void) */ static inline unsigned int get_timer_irqs(int cpu) { +#ifdef CONFIG_X86_64 + return read_pda(apic_timer_irqs) + read_pda(irq0_irqs); +#else return per_cpu(irq_stat, cpu).apic_timer_irqs + per_cpu(irq_stat, cpu).irq0_irqs; +#endif } /* Run after command line and cpu_init init, but before all other checks */ @@ -76,26 +89,33 @@ void nmi_watchdog_default(void) { if (nmi_watchdog != NMI_DEFAULT) return; +#ifdef CONFIG_X86_64 + nmi_watchdog = NMI_NONE; +#else if (lapic_watchdog_ok()) nmi_watchdog = NMI_LOCAL_APIC; else nmi_watchdog = NMI_IO_APIC; +#endif } #ifdef CONFIG_SMP -/* The performance counters used by NMI_LOCAL_APIC don't trigger when +/* + * The performance counters used by NMI_LOCAL_APIC don't trigger when * the CPU is idle. To make sure the NMI watchdog really ticks on all * CPUs during the test make them busy. */ static __init void nmi_cpu_busy(void *data) { local_irq_enable_in_hardirq(); - /* Intentionally don't use cpu_relax here. This is - to make sure that the performance counter really ticks, - even if there is a simulator or similar that catches the - pause instruction. On a real HT machine this is fine because - all other CPUs are busy with "useless" delay loops and don't - care if they get somewhat less cycles. */ + /* + * Intentionally don't use cpu_relax here. This is + * to make sure that the performance counter really ticks, + * even if there is a simulator or similar that catches the + * pause instruction. On a real HT machine this is fine because + * all other CPUs are busy with "useless" delay loops and don't + * care if they get somewhat less cycles. + */ while (endflag == 0) mb(); } @@ -106,7 +126,7 @@ int __init check_nmi_watchdog(void) unsigned int *prev_nmi_count; int cpu; - if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED)) + if (nmi_watchdog == NMI_NONE || nmi_watchdog == NMI_DISABLED) return 0; if (!atomic_read(&nmi_active)) @@ -126,7 +146,7 @@ int __init check_nmi_watchdog(void) for_each_possible_cpu(cpu) prev_nmi_count[cpu] = get_nmi_count(cpu); local_irq_enable(); - mdelay((20*1000)/nmi_hz); // wait 20 ticks + mdelay((20 * 1000) / nmi_hz); /* wait 20 ticks */ for_each_online_cpu(cpu) { if (!per_cpu(wd_enabled, cpu)) @@ -149,16 +169,20 @@ int __init check_nmi_watchdog(void) } printk("OK.\n"); - /* now that we know it works we can reduce NMI frequency to - something more reasonable; makes a difference in some configs */ + /* + * now that we know it works we can reduce NMI frequency to + * something more reasonable; makes a difference in some configs + */ if (nmi_watchdog == NMI_LOCAL_APIC) nmi_hz = lapic_adjust_nmi_hz(1); kfree(prev_nmi_count); return 0; -error: - timer_ack = !cpu_has_tsc; +error: +#ifdef CONFIG_X86_32 + timer_ack = !cpu_has_tsc; +#endif return -1; } @@ -176,18 +200,17 @@ static int __init setup_nmi_watchdog(char *str) get_option(&str, &nmi); - if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE)) + if (nmi >= NMI_INVALID || nmi < NMI_NONE) return 0; nmi_watchdog = nmi; return 1; } - __setup("nmi_watchdog=", setup_nmi_watchdog); - -/* Suspend/resume support */ - +/* + * Suspend/resume support + */ #ifdef CONFIG_PM static int nmi_pm_active; /* nmi_active before suspend */ @@ -211,7 +234,6 @@ static int lapic_nmi_resume(struct sys_device *dev) return 0; } - static struct sysdev_class nmi_sysclass = { .name = "lapic_nmi", .resume = lapic_nmi_resume, @@ -227,7 +249,8 @@ static int __init init_lapic_nmi_sysfs(void) { int error; - /* should really be a BUG_ON but b/c this is an + /* + * should really be a BUG_ON but b/c this is an * init call, it just doesn't work. -dcz */ if (nmi_watchdog != NMI_LOCAL_APIC) @@ -241,6 +264,7 @@ static int __init init_lapic_nmi_sysfs(void) error = sysdev_register(&device_lapic_nmi); return error; } + /* must come after the local APIC's device_initcall() */ late_initcall(init_lapic_nmi_sysfs); @@ -281,12 +305,13 @@ void setup_apic_nmi_watchdog(void *unused) /* cheap hack to support suspend/resume */ /* if cpu0 is not active neither should the other cpus */ - if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0)) + if (smp_processor_id() != 0 && atomic_read(&nmi_active) <= 0) return; switch (nmi_watchdog) { case NMI_LOCAL_APIC: - __get_cpu_var(wd_enabled) = 1; /* enable it before to avoid race with handler */ + /* enable it before to avoid race with handler */ + __get_cpu_var(wd_enabled) = 1; if (lapic_watchdog_init(nmi_hz) < 0) { __get_cpu_var(wd_enabled) = 0; return; @@ -301,9 +326,9 @@ void setup_apic_nmi_watchdog(void *unused) void stop_apic_nmi_watchdog(void *unused) { /* only support LOCAL and IO APICs for now */ - if ((nmi_watchdog != NMI_LOCAL_APIC) && - (nmi_watchdog != NMI_IO_APIC)) - return; + if (nmi_watchdog != NMI_LOCAL_APIC && + nmi_watchdog != NMI_IO_APIC) + return; if (__get_cpu_var(wd_enabled) == 0) return; if (nmi_watchdog == NMI_LOCAL_APIC) @@ -323,8 +348,7 @@ void stop_apic_nmi_watchdog(void *unused) * since NMIs don't listen to _any_ locks, we have to be extremely * careful not to rely on unsafe variables. The printk might lock * up though, so we have to break up any console locks first ... - * [when there will be more tty-related locks, break them up - * here too!] + * [when there will be more tty-related locks, break them up here too!] */ static DEFINE_PER_CPU(unsigned, last_irq_sum); @@ -357,7 +381,6 @@ EXPORT_SYMBOL(touch_nmi_watchdog); notrace __kprobes int nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) { - /* * Since current_thread_info()-> is always on the stack, and we * always switch the stack NMI-atomically, it's safe to use @@ -403,7 +426,7 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) * wait a few IRQs (5 seconds) before doing the oops ... */ local_inc(&__get_cpu_var(alert_counter)); - if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) + if (local_read(&__get_cpu_var(alert_counter)) == 5 * nmi_hz) /* * die_nmi will return ONLY if NOTIFY_STOP happens.. */ @@ -413,6 +436,7 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) __get_cpu_var(last_irq_sum) = sum; local_set(&__get_cpu_var(alert_counter), 0); } + /* see if the nmi watchdog went off */ if (!__get_cpu_var(wd_enabled)) return rc; @@ -421,7 +445,8 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) rc |= lapic_wd_event(nmi_hz); break; case NMI_IO_APIC: - /* don't know how to accurately check for this. + /* + * don't know how to accurately check for this. * just assume it was a watchdog timer interrupt * This matches the old behaviour. */ @@ -458,7 +483,8 @@ int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, return 0; if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) { - printk( KERN_WARNING "NMI watchdog is permanently disabled\n"); + printk(KERN_WARNING + "NMI watchdog is permanently disabled\n"); return -EIO; } @@ -471,14 +497,14 @@ int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, else disable_lapic_nmi_watchdog(); } else { - printk( KERN_WARNING + printk(KERN_WARNING "NMI watchdog doesn't know what hardware to touch\n"); return -EIO; } return 0; } -#endif +#endif /* CONFIG_SYSCTL */ int do_nmi_callback(struct pt_regs *regs, int cpu) { @@ -504,3 +530,4 @@ void __trigger_all_cpu_backtrace(void) EXPORT_SYMBOL(nmi_active); EXPORT_SYMBOL(nmi_watchdog); + diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c deleted file mode 100644 index c6802447262c..000000000000 --- a/arch/x86/kernel/nmi_64.c +++ /dev/null @@ -1,477 +0,0 @@ -/* - * NMI watchdog support on APIC systems - * - * Started by Ingo Molnar - * - * Fixes: - * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog. - * Mikael Pettersson : Power Management for local APIC NMI watchdog. - * Pavel Machek and - * Mikael Pettersson : PM converted to driver model. Disable/enable API. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include - -int unknown_nmi_panic; -int nmi_watchdog_enabled; - -static cpumask_t backtrace_mask = CPU_MASK_NONE; - -/* nmi_active: - * >0: the lapic NMI watchdog is active, but can be disabled - * <0: the lapic NMI watchdog has not been set up, and cannot - * be enabled - * 0: the lapic NMI watchdog is disabled, but can be enabled - */ -atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ -static int panic_on_timeout; - -unsigned int nmi_watchdog = NMI_DEFAULT; -static unsigned int nmi_hz = HZ; - -static DEFINE_PER_CPU(short, wd_enabled); - -static int endflag __initdata = 0; - -static inline unsigned int get_nmi_count(int cpu) -{ - return cpu_pda(cpu)->__nmi_count; -} - -static inline int mce_in_progress(void) -{ -#ifdef CONFIG_X86_MCE - return atomic_read(&mce_entry) > 0; -#endif - return 0; -} - -/* - * Take the local apic timer and PIT/HPET into account. We don't - * know which one is active, when we have highres/dyntick on - */ -static inline unsigned int get_timer_irqs(int cpu) -{ - return read_pda(apic_timer_irqs) + read_pda(irq0_irqs); -} - -/* Run after command line and cpu_init init, but before all other checks */ -void nmi_watchdog_default(void) -{ - if (nmi_watchdog != NMI_DEFAULT) - return; - nmi_watchdog = NMI_NONE; -} - -#ifdef CONFIG_SMP -/* The performance counters used by NMI_LOCAL_APIC don't trigger when - * the CPU is idle. To make sure the NMI watchdog really ticks on all - * CPUs during the test make them busy. - */ -static __init void nmi_cpu_busy(void *data) -{ - local_irq_enable_in_hardirq(); - /* Intentionally don't use cpu_relax here. This is - to make sure that the performance counter really ticks, - even if there is a simulator or similar that catches the - pause instruction. On a real HT machine this is fine because - all other CPUs are busy with "useless" delay loops and don't - care if they get somewhat less cycles. */ - while (endflag == 0) - mb(); -} -#endif - -int __init check_nmi_watchdog(void) -{ - unsigned int *prev_nmi_count; - int cpu; - - if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED)) - return 0; - - if (!atomic_read(&nmi_active)) - return 0; - - prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); - if (!prev_nmi_count) - return -1; - - printk(KERN_INFO "Testing NMI watchdog ... "); - -#ifdef CONFIG_SMP - if (nmi_watchdog == NMI_LOCAL_APIC) - smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0); -#endif - - for_each_possible_cpu(cpu) - prev_nmi_count[cpu] = get_nmi_count(cpu); - local_irq_enable(); - mdelay((20*1000)/nmi_hz); // wait 20 ticks - - for_each_online_cpu(cpu) { - if (!per_cpu(wd_enabled, cpu)) - continue; - if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { - printk(KERN_WARNING "WARNING: CPU#%d: NMI " - "appears to be stuck (%d->%d)!\n", - cpu, - prev_nmi_count[cpu], - get_nmi_count(cpu)); - per_cpu(wd_enabled, cpu) = 0; - atomic_dec(&nmi_active); - } - } - endflag = 1; - if (!atomic_read(&nmi_active)) { - kfree(prev_nmi_count); - atomic_set(&nmi_active, -1); - return -1; - } - printk("OK.\n"); - - /* now that we know it works we can reduce NMI frequency to - something more reasonable; makes a difference in some configs */ - if (nmi_watchdog == NMI_LOCAL_APIC) - nmi_hz = lapic_adjust_nmi_hz(1); - - kfree(prev_nmi_count); - return 0; -} - -static int __init setup_nmi_watchdog(char *str) -{ - int nmi; - - if (!strncmp(str,"panic",5)) { - panic_on_timeout = 1; - str = strchr(str, ','); - if (!str) - return 1; - ++str; - } - - get_option(&str, &nmi); - - if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE)) - return 0; - - nmi_watchdog = nmi; - return 1; -} - -__setup("nmi_watchdog=", setup_nmi_watchdog); - -#ifdef CONFIG_PM - -static int nmi_pm_active; /* nmi_active before suspend */ - -static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state) -{ - /* only CPU0 goes here, other CPUs should be offline */ - nmi_pm_active = atomic_read(&nmi_active); - stop_apic_nmi_watchdog(NULL); - BUG_ON(atomic_read(&nmi_active) != 0); - return 0; -} - -static int lapic_nmi_resume(struct sys_device *dev) -{ - /* only CPU0 goes here, other CPUs should be offline */ - if (nmi_pm_active > 0) { - setup_apic_nmi_watchdog(NULL); - touch_nmi_watchdog(); - } - return 0; -} - -static struct sysdev_class nmi_sysclass = { - .name = "lapic_nmi", - .resume = lapic_nmi_resume, - .suspend = lapic_nmi_suspend, -}; - -static struct sys_device device_lapic_nmi = { - .id = 0, - .cls = &nmi_sysclass, -}; - -static int __init init_lapic_nmi_sysfs(void) -{ - int error; - - /* should really be a BUG_ON but b/c this is an - * init call, it just doesn't work. -dcz - */ - if (nmi_watchdog != NMI_LOCAL_APIC) - return 0; - - if (atomic_read(&nmi_active) < 0) - return 0; - - error = sysdev_class_register(&nmi_sysclass); - if (!error) - error = sysdev_register(&device_lapic_nmi); - return error; -} -/* must come after the local APIC's device_initcall() */ -late_initcall(init_lapic_nmi_sysfs); - -#endif /* CONFIG_PM */ - -static void __acpi_nmi_enable(void *__unused) -{ - apic_write_around(APIC_LVT0, APIC_DM_NMI); -} - -/* - * Enable timer based NMIs on all CPUs: - */ -void acpi_nmi_enable(void) -{ - if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) - on_each_cpu(__acpi_nmi_enable, NULL, 0, 1); -} - -static void __acpi_nmi_disable(void *__unused) -{ - apic_write_around(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); -} - -/* - * Disable timer based NMIs on all CPUs: - */ -void acpi_nmi_disable(void) -{ - if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) - on_each_cpu(__acpi_nmi_disable, NULL, 0, 1); -} - -void setup_apic_nmi_watchdog(void *unused) -{ - if (__get_cpu_var(wd_enabled)) - return; - - /* cheap hack to support suspend/resume */ - /* if cpu0 is not active neither should the other cpus */ - if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0)) - return; - - switch (nmi_watchdog) { - case NMI_LOCAL_APIC: - __get_cpu_var(wd_enabled) = 1; - if (lapic_watchdog_init(nmi_hz) < 0) { - __get_cpu_var(wd_enabled) = 0; - return; - } - /* FALL THROUGH */ - case NMI_IO_APIC: - __get_cpu_var(wd_enabled) = 1; - atomic_inc(&nmi_active); - } -} - -void stop_apic_nmi_watchdog(void *unused) -{ - /* only support LOCAL and IO APICs for now */ - if ((nmi_watchdog != NMI_LOCAL_APIC) && - (nmi_watchdog != NMI_IO_APIC)) - return; - if (__get_cpu_var(wd_enabled) == 0) - return; - if (nmi_watchdog == NMI_LOCAL_APIC) - lapic_watchdog_stop(); - __get_cpu_var(wd_enabled) = 0; - atomic_dec(&nmi_active); -} - -/* - * the best way to detect whether a CPU has a 'hard lockup' problem - * is to check it's local APIC timer IRQ counts. If they are not - * changing then that CPU has some problem. - * - * as these watchdog NMI IRQs are generated on every CPU, we only - * have to check the current processor. - */ - -static DEFINE_PER_CPU(unsigned, last_irq_sum); -static DEFINE_PER_CPU(local_t, alert_counter); -static DEFINE_PER_CPU(int, nmi_touch); - -void touch_nmi_watchdog(void) -{ - if (nmi_watchdog > 0) { - unsigned cpu; - - /* - * Tell other CPUs to reset their alert counters. We cannot - * do it ourselves because the alert count increase is not - * atomic. - */ - for_each_present_cpu(cpu) { - if (per_cpu(nmi_touch, cpu) != 1) - per_cpu(nmi_touch, cpu) = 1; - } - } - - touch_softlockup_watchdog(); -} -EXPORT_SYMBOL(touch_nmi_watchdog); - -notrace __kprobes int -nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) -{ - unsigned int sum; - int touched = 0; - int cpu = smp_processor_id(); - int rc = 0; - - /* check for other users first */ - if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) - == NOTIFY_STOP) { - rc = 1; - touched = 1; - } - - sum = get_timer_irqs(cpu); - - if (__get_cpu_var(nmi_touch)) { - __get_cpu_var(nmi_touch) = 0; - touched = 1; - } - - if (cpu_isset(cpu, backtrace_mask)) { - static DEFINE_SPINLOCK(lock); /* Serialise the printks */ - - spin_lock(&lock); - printk("NMI backtrace for cpu %d\n", cpu); - dump_stack(); - spin_unlock(&lock); - cpu_clear(cpu, backtrace_mask); - } - - if (mce_in_progress()) - touched = 1; - - /* if the apic timer isn't firing, this cpu isn't doing much */ - if (!touched && __get_cpu_var(last_irq_sum) == sum) { - /* - * Ayiee, looks like this CPU is stuck ... - * wait a few IRQs (5 seconds) before doing the oops ... - */ - local_inc(&__get_cpu_var(alert_counter)); - if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) - die_nmi("NMI Watchdog detected LOCKUP", - regs, panic_on_timeout); - } else { - __get_cpu_var(last_irq_sum) = sum; - local_set(&__get_cpu_var(alert_counter), 0); - } - - /* see if the nmi watchdog went off */ - if (!__get_cpu_var(wd_enabled)) - return rc; - switch (nmi_watchdog) { - case NMI_LOCAL_APIC: - rc |= lapic_wd_event(nmi_hz); - break; - case NMI_IO_APIC: - /* don't know how to accurately check for this. - * just assume it was a watchdog timer interrupt - * This matches the old behaviour. - */ - rc = 1; - break; - } - return rc; -} - -#ifdef CONFIG_SYSCTL - -static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) -{ - unsigned char reason = get_nmi_reason(); - char buf[64]; - - sprintf(buf, "NMI received for unknown reason %02x\n", reason); - die_nmi(buf, regs, 1); /* Always panic here */ - return 0; -} - -/* - * proc handler for /proc/sys/kernel/nmi - */ -int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, - void __user *buffer, size_t *length, loff_t *ppos) -{ - int old_state; - - nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0; - old_state = nmi_watchdog_enabled; - proc_dointvec(table, write, file, buffer, length, ppos); - if (!!old_state == !!nmi_watchdog_enabled) - return 0; - - if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) { - printk( KERN_WARNING "NMI watchdog is permanently disabled\n"); - return -EIO; - } - - /* if nmi_watchdog is not set yet, then set it */ - nmi_watchdog_default(); - - if (nmi_watchdog == NMI_LOCAL_APIC) { - if (nmi_watchdog_enabled) - enable_lapic_nmi_watchdog(); - else - disable_lapic_nmi_watchdog(); - } else { - printk( KERN_WARNING - "NMI watchdog doesn't know what hardware to touch\n"); - return -EIO; - } - return 0; -} - -#endif - -int do_nmi_callback(struct pt_regs *regs, int cpu) -{ -#ifdef CONFIG_SYSCTL - if (unknown_nmi_panic) - return unknown_nmi_panic_callback(regs, cpu); -#endif - return 0; -} - -void __trigger_all_cpu_backtrace(void) -{ - int i; - - backtrace_mask = cpu_online_map; - /* Wait for up to 10 seconds for all CPUs to do the backtrace */ - for (i = 0; i < 10 * 1000; i++) { - if (cpus_empty(backtrace_mask)) - break; - mdelay(1); - } -} - -EXPORT_SYMBOL(nmi_active); -EXPORT_SYMBOL(nmi_watchdog); From 4b6011bc6ec71660859139ac8d28b7d0badd681c Mon Sep 17 00:00:00 2001 From: Sven Wegener Date: Sun, 25 May 2008 21:16:36 +0200 Subject: [PATCH 164/821] x86: Remove obsolete LOCK macro from include/asm-x86/atomic_64.h Commit d167a518 "[PATCH] x86_64: x86_64 version of the smp alternative patch." has left the LOCK macro in include/asm-x86_64/atomic.h, which is now include/asm-x86/atomic_64.h. Its scope should be local to the file, other architectures don't provide it, I couldn't find an in-tree user of it and allyesconfig, allmodconfig and allnoconfig build fine without it, so this patch removes it. Signed-off-by: Sven Wegener Signed-off-by: Thomas Gleixner --- include/asm-x86/atomic_64.h | 6 ------ 1 file changed, 6 deletions(-) diff --git a/include/asm-x86/atomic_64.h b/include/asm-x86/atomic_64.h index 3e0cd7d38335..fe589c153db8 100644 --- a/include/asm-x86/atomic_64.h +++ b/include/asm-x86/atomic_64.h @@ -11,12 +11,6 @@ * resource counting etc.. */ -#ifdef CONFIG_SMP -#define LOCK "lock ; " -#else -#define LOCK "" -#endif - /* * Make sure gcc doesn't try to be clever and move things around * on us. We need to use _exactly_ the address the user gave us, From 1a20d3ecf5c2a6435df2b756435b1eb1c657d45b Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 26 May 2008 13:36:53 -0700 Subject: [PATCH 165/821] x86: string_32.h: workaround for broken gcc 4.0 gcc 4.0 fails to allocate %eax for the pattern operand in the rep store instructions used by memset; force it to do so by declaring a register variable. Signed-off-by: H. Peter Anvin --- include/asm-x86/string_32.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/include/asm-x86/string_32.h b/include/asm-x86/string_32.h index 8d0c593c4413..193578cd1fd9 100644 --- a/include/asm-x86/string_32.h +++ b/include/asm-x86/string_32.h @@ -267,11 +267,18 @@ void *__constant_c_and_count_memset(void *s, unsigned long pattern, asm volatile("rep ; stosl" \ x \ : "=&c" (d0), "=&D" (d1) \ - : "a" (pattern), "0" (count/4), "1" ((long)s) \ + : "a" (eax), "0" (count/4), "1" ((long)s) \ : "memory") { int d0, d1; +#if __GNUC__ == 4 && __GNUC_MINOR__ == 0 + /* Workaround for broken gcc 4.0 */ + register unsigned long eax asm("%eax") = pattern; +#else + unsigned long eax = pattern; +#endif + switch (count % 4) { case 0: COMMON(""); From 4226ab93d8ae3fd895abe45879fe34d489a98718 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:30:58 +0100 Subject: [PATCH 166/821] x86: use pteval_t for _PAGE_FOO Rather than making _PAGE_* constants signed, and then relying on sign-extension to make sure that masks derived from them are wide enough, just explicitly type them pteval_t. This guarantees that they and any derived values are the right size for the current pte format. The reliance on sign extension is fragile, and invokes some very subtle corners of the C type system. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- include/asm-x86/pgtable.h | 49 ++++++++++++++++++--------------------- 1 file changed, 22 insertions(+), 27 deletions(-) diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h index 97c271b2910b..fab3ecb54b68 100644 --- a/include/asm-x86/pgtable.h +++ b/include/asm-x86/pgtable.h @@ -20,30 +20,25 @@ #define _PAGE_BIT_PAT_LARGE 12 /* On 2MB or 1GB pages */ #define _PAGE_BIT_NX 63 /* No execute: only valid after cpuid check */ -/* - * Note: we use _AC(1, L) instead of _AC(1, UL) so that we get a - * sign-extended value on 32-bit with all 1's in the upper word, - * which preserves the upper pte values on 64-bit ptes: - */ -#define _PAGE_PRESENT (_AC(1, L)<<_PAGE_BIT_PRESENT) -#define _PAGE_RW (_AC(1, L)<<_PAGE_BIT_RW) -#define _PAGE_USER (_AC(1, L)<<_PAGE_BIT_USER) -#define _PAGE_PWT (_AC(1, L)<<_PAGE_BIT_PWT) -#define _PAGE_PCD (_AC(1, L)<<_PAGE_BIT_PCD) -#define _PAGE_ACCESSED (_AC(1, L)<<_PAGE_BIT_ACCESSED) -#define _PAGE_DIRTY (_AC(1, L)<<_PAGE_BIT_DIRTY) -#define _PAGE_PSE (_AC(1, L)<<_PAGE_BIT_PSE) /* 2MB page */ -#define _PAGE_GLOBAL (_AC(1, L)<<_PAGE_BIT_GLOBAL) /* Global TLB entry */ -#define _PAGE_UNUSED1 (_AC(1, L)<<_PAGE_BIT_UNUSED1) -#define _PAGE_UNUSED2 (_AC(1, L)<<_PAGE_BIT_UNUSED2) -#define _PAGE_UNUSED3 (_AC(1, L)<<_PAGE_BIT_UNUSED3) -#define _PAGE_PAT (_AC(1, L)<<_PAGE_BIT_PAT) -#define _PAGE_PAT_LARGE (_AC(1, L)<<_PAGE_BIT_PAT_LARGE) +#define _PAGE_PRESENT (_AT(pteval_t, 1) << _PAGE_BIT_PRESENT) +#define _PAGE_RW (_AT(pteval_t, 1) << _PAGE_BIT_RW) +#define _PAGE_USER (_AT(pteval_t, 1) << _PAGE_BIT_USER) +#define _PAGE_PWT (_AT(pteval_t, 1) << _PAGE_BIT_PWT) +#define _PAGE_PCD (_AT(pteval_t, 1) << _PAGE_BIT_PCD) +#define _PAGE_ACCESSED (_AT(pteval_t, 1) << _PAGE_BIT_ACCESSED) +#define _PAGE_DIRTY (_AT(pteval_t, 1) << _PAGE_BIT_DIRTY) +#define _PAGE_PSE (_AT(pteval_t, 1) << _PAGE_BIT_PSE) +#define _PAGE_GLOBAL (_AT(pteval_t, 1) << _PAGE_BIT_GLOBAL) +#define _PAGE_UNUSED1 (_AT(pteval_t, 1) << _PAGE_BIT_UNUSED1) +#define _PAGE_UNUSED2 (_AT(pteval_t, 1) << _PAGE_BIT_UNUSED2) +#define _PAGE_UNUSED3 (_AT(pteval_t, 1) << _PAGE_BIT_UNUSED3) +#define _PAGE_PAT (_AT(pteval_t, 1) << _PAGE_BIT_PAT) +#define _PAGE_PAT_LARGE (_AT(pteval_t, 1) << _PAGE_BIT_PAT_LARGE) #if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE) -#define _PAGE_NX (_AC(1, ULL) << _PAGE_BIT_NX) +#define _PAGE_NX (_AT(pteval_t, 1) << _PAGE_BIT_NX) #else -#define _PAGE_NX 0 +#define _PAGE_NX (_AT(pteval_t, 0)) #endif /* If _PAGE_PRESENT is clear, we use these: */ @@ -210,22 +205,22 @@ static inline int pmd_large(pmd_t pte) static inline pte_t pte_mkclean(pte_t pte) { - return __pte(pte_val(pte) & ~(pteval_t)_PAGE_DIRTY); + return __pte(pte_val(pte) & ~_PAGE_DIRTY); } static inline pte_t pte_mkold(pte_t pte) { - return __pte(pte_val(pte) & ~(pteval_t)_PAGE_ACCESSED); + return __pte(pte_val(pte) & ~_PAGE_ACCESSED); } static inline pte_t pte_wrprotect(pte_t pte) { - return __pte(pte_val(pte) & ~(pteval_t)_PAGE_RW); + return __pte(pte_val(pte) & ~_PAGE_RW); } static inline pte_t pte_mkexec(pte_t pte) { - return __pte(pte_val(pte) & ~(pteval_t)_PAGE_NX); + return __pte(pte_val(pte) & ~_PAGE_NX); } static inline pte_t pte_mkdirty(pte_t pte) @@ -250,7 +245,7 @@ static inline pte_t pte_mkhuge(pte_t pte) static inline pte_t pte_clrhuge(pte_t pte) { - return __pte(pte_val(pte) & ~(pteval_t)_PAGE_PSE); + return __pte(pte_val(pte) & ~_PAGE_PSE); } static inline pte_t pte_mkglobal(pte_t pte) @@ -260,7 +255,7 @@ static inline pte_t pte_mkglobal(pte_t pte) static inline pte_t pte_clrglobal(pte_t pte) { - return __pte(pte_val(pte) & ~(pteval_t)_PAGE_GLOBAL); + return __pte(pte_val(pte) & ~_PAGE_GLOBAL); } static inline pte_t pte_mkspecial(pte_t pte) From 4e09e21ccb0dfe7ee8d5641192e0072e83bd916b Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:03 +0100 Subject: [PATCH 167/821] x86: use symbolic constant in stts() Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- include/asm-x86/system.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-x86/system.h b/include/asm-x86/system.h index a2f04cd79b29..7e4c133795a1 100644 --- a/include/asm-x86/system.h +++ b/include/asm-x86/system.h @@ -289,7 +289,7 @@ static inline void native_wbinvd(void) #endif/* CONFIG_PARAVIRT */ -#define stts() write_cr0(8 | read_cr0()) +#define stts() write_cr0(read_cr0() | X86_CR0_TS) #endif /* __KERNEL__ */ From 0acf10d8fbd52926217d3933d196b33fe2468f18 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:30:59 +0100 Subject: [PATCH 168/821] xen: add raw console write functions for debug Add a couple of functions which can write directly to the Xen console for debugging. This output ends up on the host's dom0 console (assuming it allows the domain to write there). Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- drivers/char/hvc_xen.c | 26 ++++++++++++++++++++++++++ include/xen/hvc-console.h | 3 +++ 2 files changed, 29 insertions(+) diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c index dd68f8541c2d..e97d9d168325 100644 --- a/drivers/char/hvc_xen.c +++ b/drivers/char/hvc_xen.c @@ -157,3 +157,29 @@ struct console xenboot_console = { .write = xenboot_write_console, .flags = CON_PRINTBUFFER | CON_BOOT, }; + +void xen_raw_console_write(const char *str) +{ + int len = strlen(str); + + while(len > 0) { + int rc = HYPERVISOR_console_io(CONSOLEIO_write, len, (char *)str); + if (rc <= 0) + break; + + str += rc; + len -= rc; + } +} + +void xen_raw_printk(const char *fmt, ...) +{ + static char buf[512]; + va_list ap; + + va_start(ap, fmt); + vsnprintf(buf, sizeof(buf), fmt, ap); + va_end(ap); + + xen_raw_console_write(buf); +} diff --git a/include/xen/hvc-console.h b/include/xen/hvc-console.h index 21c0ecfd786d..efc3237ab990 100644 --- a/include/xen/hvc-console.h +++ b/include/xen/hvc-console.h @@ -3,4 +3,7 @@ extern struct console xenboot_console; +void xen_raw_console_write(const char *str); +void xen_raw_printk(const char *fmt, ...); + #endif /* XEN_HVC_CONSOLE_H */ From 0922abdc3982ae54cbe1b24ac5aa91a260eca1bb Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:00 +0100 Subject: [PATCH 169/821] xen: make early console also write to debug console When using "earlyprintk=xen", also write the console output to the raw debug console. This will appear on dom0's console if the hypervisor has been compiled to allow it. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- drivers/char/hvc_xen.c | 29 ++++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-) diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c index e97d9d168325..2413af342a81 100644 --- a/drivers/char/hvc_xen.c +++ b/drivers/char/hvc_xen.c @@ -134,12 +134,27 @@ module_init(xen_init); module_exit(xen_fini); console_initcall(xen_cons_init); +static void raw_console_write(const char *str, int len) +{ + while(len > 0) { + int rc = HYPERVISOR_console_io(CONSOLEIO_write, len, (char *)str); + if (rc <= 0) + break; + + str += rc; + len -= rc; + } +} + +#ifdef CONFIG_EARLY_PRINTK static void xenboot_write_console(struct console *console, const char *string, unsigned len) { unsigned int linelen, off = 0; const char *pos; + raw_console_write(string, len); + while (off < len && NULL != (pos = strchr(string+off, '\n'))) { linelen = pos-string+off; if (off + linelen > len) @@ -155,21 +170,13 @@ static void xenboot_write_console(struct console *console, const char *string, struct console xenboot_console = { .name = "xenboot", .write = xenboot_write_console, - .flags = CON_PRINTBUFFER | CON_BOOT, + .flags = CON_PRINTBUFFER | CON_BOOT | CON_ANYTIME, }; +#endif /* CONFIG_EARLY_PRINTK */ void xen_raw_console_write(const char *str) { - int len = strlen(str); - - while(len > 0) { - int rc = HYPERVISOR_console_io(CONSOLEIO_write, len, (char *)str); - if (rc <= 0) - break; - - str += rc; - len -= rc; - } + raw_console_write(str, strlen(str)); } void xen_raw_printk(const char *fmt, ...) From 7b1333aa4cb546ddeb9c05098a53d9a777623a05 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:01 +0100 Subject: [PATCH 170/821] xen: use hypercall rather than clts Xen will trap and emulate clts, but its better to use a hypercall. Also, xenner doesn't handle clts. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/enlighten.c | 28 ++++++++++++++++++++++++++-- include/asm-x86/xen/hypercall.h | 7 +++++++ 2 files changed, 33 insertions(+), 2 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index a05b7721bc81..446f4cd649e6 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -607,6 +607,30 @@ static void xen_flush_tlb_others(const cpumask_t *cpus, struct mm_struct *mm, xen_mc_issue(PARAVIRT_LAZY_MMU); } +static void xen_clts(void) +{ + struct multicall_space mcs; + + mcs = xen_mc_entry(0); + + MULTI_fpu_taskswitch(mcs.mc, 0); + + xen_mc_issue(PARAVIRT_LAZY_CPU); +} + +static void xen_write_cr0(unsigned long cr0) +{ + struct multicall_space mcs; + + /* Only pay attention to cr0.TS; everything else is + ignored. */ + mcs = xen_mc_entry(0); + + MULTI_fpu_taskswitch(mcs.mc, (cr0 & X86_CR0_TS) != 0); + + xen_mc_issue(PARAVIRT_LAZY_CPU); +} + static void xen_write_cr2(unsigned long cr2) { x86_read_percpu(xen_vcpu)->arch.cr2 = cr2; @@ -978,10 +1002,10 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = { .set_debugreg = xen_set_debugreg, .get_debugreg = xen_get_debugreg, - .clts = native_clts, + .clts = xen_clts, .read_cr0 = native_read_cr0, - .write_cr0 = native_write_cr0, + .write_cr0 = xen_write_cr0, .read_cr4 = native_read_cr4, .read_cr4_safe = native_read_cr4_safe, diff --git a/include/asm-x86/xen/hypercall.h b/include/asm-x86/xen/hypercall.h index c2ccd997ed35..897ff79cca3b 100644 --- a/include/asm-x86/xen/hypercall.h +++ b/include/asm-x86/xen/hypercall.h @@ -314,6 +314,13 @@ HYPERVISOR_nmi_op(unsigned long op, unsigned long arg) return _hypercall2(int, nmi_op, op, arg); } +static inline void +MULTI_fpu_taskswitch(struct multicall_entry *mcl, int set) +{ + mcl->op = __HYPERVISOR_fpu_taskswitch; + mcl->args[0] = set; +} + static inline void MULTI_update_va_mapping(struct multicall_entry *mcl, unsigned long va, pte_t new_val, unsigned long flags) From 349c709f42453707f74bece0d9d35ee5b3842893 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:02 +0100 Subject: [PATCH 171/821] xen: use new sched_op Use the new sched_op hypercall, mainly because xenner doesn't support the old one. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/enlighten.c | 6 ++++-- include/asm-x86/xen/hypercall.h | 4 ++-- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 446f4cd649e6..35ddaf50180a 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -254,7 +254,7 @@ static void xen_irq_enable(void) static void xen_safe_halt(void) { /* Blocking includes an implicit local_irq_enable(). */ - if (HYPERVISOR_sched_op(SCHEDOP_block, 0) != 0) + if (HYPERVISOR_sched_op(SCHEDOP_block, NULL) != 0) BUG(); } @@ -1138,11 +1138,13 @@ static const struct smp_ops xen_smp_ops __initdata = { static void xen_reboot(int reason) { + struct sched_shutdown r = { .reason = reason }; + #ifdef CONFIG_SMP smp_send_stop(); #endif - if (HYPERVISOR_sched_op(SCHEDOP_shutdown, reason)) + if (HYPERVISOR_sched_op(SCHEDOP_shutdown, &r)) BUG(); } diff --git a/include/asm-x86/xen/hypercall.h b/include/asm-x86/xen/hypercall.h index 897ff79cca3b..2a4f9b41d684 100644 --- a/include/asm-x86/xen/hypercall.h +++ b/include/asm-x86/xen/hypercall.h @@ -176,9 +176,9 @@ HYPERVISOR_fpu_taskswitch(int set) } static inline int -HYPERVISOR_sched_op(int cmd, unsigned long arg) +HYPERVISOR_sched_op(int cmd, void *arg) { - return _hypercall2(int, sched_op, cmd, arg); + return _hypercall2(int, sched_op_new, cmd, arg); } static inline long From 2956a3511c8c5dccb1d4739ead17c7c3c23a24b7 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:04 +0100 Subject: [PATCH 172/821] xen: allow some cr4 updates The guest can legitimately change things like cr4.OSFXSR and OSXMMEXCPT, so let it. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/enlighten.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 35ddaf50180a..f6876485ee7d 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -648,8 +648,10 @@ static unsigned long xen_read_cr2_direct(void) static void xen_write_cr4(unsigned long cr4) { - /* Just ignore cr4 changes; Xen doesn't allow us to do - anything anyway. */ + cr4 &= ~X86_CR4_PGE; + cr4 &= ~X86_CR4_PSE; + + native_write_cr4(cr4); } static unsigned long xen_read_cr3(void) From 239d1fc04ed0b58d638096b12a7f6d50269d30c9 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:05 +0100 Subject: [PATCH 173/821] xen: don't worry about preempt during xen_irq_enable() When enabling interrupts, we don't need to worry about preemption, because we either enter with interrupts disabled - so no preemption - or the caller is confused and is re-enabling interrupts on some indeterminate processor. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/enlighten.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index f6876485ee7d..4a372b71239d 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -235,13 +235,13 @@ static void xen_irq_enable(void) { struct vcpu_info *vcpu; - /* There's a one instruction preempt window here. We need to - make sure we're don't switch CPUs between getting the vcpu - pointer and updating the mask. */ - preempt_disable(); + /* We don't need to worry about being preempted here, since + either a) interrupts are disabled, so no preemption, or b) + the caller is confused and is trying to re-enable interrupts + on an indeterminate processor. */ + vcpu = x86_read_percpu(xen_vcpu); vcpu->evtchn_upcall_mask = 0; - preempt_enable_no_resched(); /* Doesn't matter if we get preempted here, because any pending event will get dealt with anyway. */ From a15af1c9ea2750a9ff01e51615c45950bad8221b Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:06 +0100 Subject: [PATCH 174/821] x86/paravirt: add pte_flags to just get pte flags Add pte_flags() to extract the flags from a pte. This is a special case of pte_val() which is only guaranteed to return the pte's flags correctly; the page number may be corrupted or missing. The intent is to allow paravirt implementations to return pte flags without having to do any translation of the page number (most notably, Xen). Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/kernel/paravirt.c | 1 + arch/x86/xen/enlighten.c | 1 + drivers/lguest/lg.h | 1 - include/asm-x86/page.h | 1 + include/asm-x86/paravirt.h | 15 +++++++++++++++ include/asm-x86/pgtable.h | 16 ++++++++-------- 6 files changed, 26 insertions(+), 9 deletions(-) diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c index 74f0c5ea2a03..c98d54688180 100644 --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -403,6 +403,7 @@ struct pv_mmu_ops pv_mmu_ops = { #endif /* PAGETABLE_LEVELS >= 3 */ .pte_val = native_pte_val, + .pte_flags = native_pte_val, .pgd_val = native_pgd_val, .make_pte = native_make_pte, diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 4a372b71239d..1b4b5fa498b3 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1101,6 +1101,7 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .set_pmd = xen_set_pmd, .pte_val = xen_pte_val, + .pte_flags = native_pte_val, .pgd_val = xen_pgd_val, .make_pte = xen_make_pte, diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h index 005bd045d2eb..5faefeaf6790 100644 --- a/drivers/lguest/lg.h +++ b/drivers/lguest/lg.h @@ -136,7 +136,6 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user); * first step in the migration to the kernel types. pte_pfn is already defined * in the kernel. */ #define pgd_flags(x) (pgd_val(x) & ~PAGE_MASK) -#define pte_flags(x) (pte_val(x) & ~PAGE_MASK) #define pgd_pfn(x) (pgd_val(x) >> PAGE_SHIFT) /* interrupts_and_traps.c: */ diff --git a/include/asm-x86/page.h b/include/asm-x86/page.h index dc936dddf161..a1e2b9470f25 100644 --- a/include/asm-x86/page.h +++ b/include/asm-x86/page.h @@ -160,6 +160,7 @@ static inline pteval_t native_pte_val(pte_t pte) #endif #define pte_val(x) native_pte_val(x) +#define pte_flags(x) native_pte_val(x) #define __pte(x) native_make_pte(x) #endif /* CONFIG_PARAVIRT */ diff --git a/include/asm-x86/paravirt.h b/include/asm-x86/paravirt.h index 0f13b945e240..5ea37a48eecb 100644 --- a/include/asm-x86/paravirt.h +++ b/include/asm-x86/paravirt.h @@ -239,6 +239,7 @@ struct pv_mmu_ops { unsigned long addr, pte_t *ptep); pteval_t (*pte_val)(pte_t); + pteval_t (*pte_flags)(pte_t); pte_t (*make_pte)(pteval_t pte); pgdval_t (*pgd_val)(pgd_t); @@ -996,6 +997,20 @@ static inline pteval_t pte_val(pte_t pte) return ret; } +static inline pteval_t pte_flags(pte_t pte) +{ + pteval_t ret; + + if (sizeof(pteval_t) > sizeof(long)) + ret = PVOP_CALL2(pteval_t, pv_mmu_ops.pte_flags, + pte.pte, (u64)pte.pte >> 32); + else + ret = PVOP_CALL1(pteval_t, pv_mmu_ops.pte_flags, + pte.pte); + + return ret; +} + static inline pgd_t __pgd(pgdval_t val) { pgdval_t ret; diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h index 97c271b2910b..47a852cb8c92 100644 --- a/include/asm-x86/pgtable.h +++ b/include/asm-x86/pgtable.h @@ -164,37 +164,37 @@ extern struct list_head pgd_list; */ static inline int pte_dirty(pte_t pte) { - return pte_val(pte) & _PAGE_DIRTY; + return pte_flags(pte) & _PAGE_DIRTY; } static inline int pte_young(pte_t pte) { - return pte_val(pte) & _PAGE_ACCESSED; + return pte_flags(pte) & _PAGE_ACCESSED; } static inline int pte_write(pte_t pte) { - return pte_val(pte) & _PAGE_RW; + return pte_flags(pte) & _PAGE_RW; } static inline int pte_file(pte_t pte) { - return pte_val(pte) & _PAGE_FILE; + return pte_flags(pte) & _PAGE_FILE; } static inline int pte_huge(pte_t pte) { - return pte_val(pte) & _PAGE_PSE; + return pte_flags(pte) & _PAGE_PSE; } static inline int pte_global(pte_t pte) { - return pte_val(pte) & _PAGE_GLOBAL; + return pte_flags(pte) & _PAGE_GLOBAL; } static inline int pte_exec(pte_t pte) { - return !(pte_val(pte) & _PAGE_NX); + return !(pte_flags(pte) & _PAGE_NX); } static inline int pte_special(pte_t pte) @@ -305,7 +305,7 @@ static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot) return __pgprot(preservebits | addbits); } -#define pte_pgprot(x) __pgprot(pte_val(x) & ~PTE_MASK) +#define pte_pgprot(x) __pgprot(pte_flags(x) & ~PTE_MASK) #define canon_pgprot(p) __pgprot(pgprot_val(p) & __supported_pte_mask) From 9e124fe16ff24746d6de5a2ad685266d7bce0e08 Mon Sep 17 00:00:00 2001 From: Markus Armbruster Date: Mon, 26 May 2008 23:31:07 +0100 Subject: [PATCH 175/821] xen: Enable console tty by default in domU if it's not a dummy Without console= arguments on the kernel command line, the first console to register becomes enabled and the preferred console (the one behind /dev/console). This is normally tty (assuming CONFIG_VT_CONSOLE is enabled, which it commonly is). This is okay as long tty is a useful console. But unless we have the PV framebuffer, and it is enabled for this domain, tty0 in domU is merely a dummy. In that case, we want the preferred console to be the Xen console hvc0, and we want it without having to fiddle with the kernel command line. Commit b8c2d3dfbc117dff26058fbac316b8acfc2cb5f7 did that for us. Since we now have the PV framebuffer, we want to enable and prefer tty again, but only when PVFB is enabled. But even then we still want to enable the Xen console as well. Problem: when tty registers, we can't yet know whether the PVFB is enabled. By the time we can know (xenstore is up), the console setup game is over. Solution: enable console tty by default, but keep hvc as the preferred console. Change the preferred console to tty when PVFB probes successfully, unless we've been given console kernel parameters. Signed-off-by: Markus Armbruster Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/enlighten.c | 4 +++- drivers/video/xen-fbfront.c | 25 +++++++++++++++++++++++++ include/linux/console.h | 2 ++ kernel/printk.c | 3 +++ 4 files changed, 33 insertions(+), 1 deletion(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 1b4b5fa498b3..6cfb708408e9 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1256,8 +1256,10 @@ asmlinkage void __init xen_start_kernel(void) ? __pa(xen_start_info->mod_start) : 0; boot_params.hdr.ramdisk_size = xen_start_info->mod_len; - if (!is_initial_xendomain()) + if (!is_initial_xendomain()) { + add_preferred_console("tty", 0, NULL); add_preferred_console("hvc", 0, NULL); + } /* Start the world */ start_kernel(); diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c index 619a6f8d65a2..4e10876e62fc 100644 --- a/drivers/video/xen-fbfront.c +++ b/drivers/video/xen-fbfront.c @@ -18,6 +18,7 @@ * frame buffer. */ +#include #include #include #include @@ -48,6 +49,7 @@ struct xenfb_info { static u32 xenfb_mem_len = XENFB_WIDTH * XENFB_HEIGHT * XENFB_DEPTH / 8; +static void xenfb_make_preferred_console(void); static int xenfb_remove(struct xenbus_device *); static void xenfb_init_shared_page(struct xenfb_info *); static int xenfb_connect_backend(struct xenbus_device *, struct xenfb_info *); @@ -348,6 +350,7 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, if (ret < 0) goto error; + xenfb_make_preferred_console(); return 0; error_nomem: @@ -358,6 +361,28 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, return ret; } +static __devinit void +xenfb_make_preferred_console(void) +{ + struct console *c; + + if (console_set_on_cmdline) + return; + + acquire_console_sem(); + for (c = console_drivers; c; c = c->next) { + if (!strcmp(c->name, "tty") && c->index == 0) + break; + } + release_console_sem(); + if (c) { + unregister_console(c); + c->flags |= CON_CONSDEV; + c->flags &= ~CON_PRINTBUFFER; /* don't print again */ + register_console(c); + } +} + static int xenfb_resume(struct xenbus_device *dev) { struct xenfb_info *info = dev->dev.driver_data; diff --git a/include/linux/console.h b/include/linux/console.h index a4f27fbdf549..248e6e3b9b73 100644 --- a/include/linux/console.h +++ b/include/linux/console.h @@ -108,6 +108,8 @@ struct console { struct console *next; }; +extern int console_set_on_cmdline; + extern int add_preferred_console(char *name, int idx, char *options); extern int update_console_cmdline(char *name, int idx, char *name_new, int idx_new, char *options); extern void register_console(struct console *); diff --git a/kernel/printk.c b/kernel/printk.c index 8fb01c32aa3b..028ed75d4864 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -121,6 +121,8 @@ struct console_cmdline static struct console_cmdline console_cmdline[MAX_CMDLINECONSOLES]; static int selected_console = -1; static int preferred_console = -1; +int console_set_on_cmdline; +EXPORT_SYMBOL(console_set_on_cmdline); /* Flag: console code may call schedule() */ static int console_may_schedule; @@ -890,6 +892,7 @@ static int __init console_setup(char *str) *s = 0; __add_preferred_console(buf, idx, options, brl_options); + console_set_on_cmdline = 1; return 1; } __setup("console=", console_setup); From 6ba0e7b36c7cc1745b3cbeda244d14edae3ad058 Mon Sep 17 00:00:00 2001 From: Markus Armbruster Date: Mon, 26 May 2008 23:31:08 +0100 Subject: [PATCH 176/821] xen pvfb: Pointer z-axis (mouse wheel) support Add z-axis motion to pointer events. Backward compatible, because there's space for the z-axis in union xenkbd_in_event, and old backends zero it. Derived from http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/57dfe0098000 http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/1edfea26a2a9 http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/c3ff0b26f664 Signed-off-by: Pat Campbell Signed-off-by: Markus Armbruster Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- drivers/input/xen-kbdfront.c | 8 +++++++- include/xen/interface/io/kbdif.h | 2 ++ 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c index 0f47f4697cdf..9da4452786fa 100644 --- a/drivers/input/xen-kbdfront.c +++ b/drivers/input/xen-kbdfront.c @@ -66,6 +66,9 @@ static irqreturn_t input_handler(int rq, void *dev_id) case XENKBD_TYPE_MOTION: input_report_rel(dev, REL_X, event->motion.rel_x); input_report_rel(dev, REL_Y, event->motion.rel_y); + if (event->motion.rel_z) + input_report_rel(dev, REL_WHEEL, + -event->motion.rel_z); break; case XENKBD_TYPE_KEY: dev = NULL; @@ -84,6 +87,9 @@ static irqreturn_t input_handler(int rq, void *dev_id) case XENKBD_TYPE_POS: input_report_abs(dev, ABS_X, event->pos.abs_x); input_report_abs(dev, ABS_Y, event->pos.abs_y); + if (event->pos.rel_z) + input_report_rel(dev, REL_WHEEL, + -event->pos.rel_z); break; } if (dev) @@ -152,7 +158,7 @@ static int __devinit xenkbd_probe(struct xenbus_device *dev, ptr->evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_ABS); for (i = BTN_LEFT; i <= BTN_TASK; i++) set_bit(i, ptr->keybit); - ptr->relbit[0] = BIT(REL_X) | BIT(REL_Y); + ptr->relbit[0] = BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL); input_set_abs_params(ptr, ABS_X, 0, XENFB_WIDTH, 0, 0); input_set_abs_params(ptr, ABS_Y, 0, XENFB_HEIGHT, 0, 0); diff --git a/include/xen/interface/io/kbdif.h b/include/xen/interface/io/kbdif.h index fb97f4284ffd..8066c7849fbe 100644 --- a/include/xen/interface/io/kbdif.h +++ b/include/xen/interface/io/kbdif.h @@ -49,6 +49,7 @@ struct xenkbd_motion { uint8_t type; /* XENKBD_TYPE_MOTION */ int32_t rel_x; /* relative X motion */ int32_t rel_y; /* relative Y motion */ + int32_t rel_z; /* relative Z motion (wheel) */ }; struct xenkbd_key { @@ -61,6 +62,7 @@ struct xenkbd_position { uint8_t type; /* XENKBD_TYPE_POS */ int32_t abs_x; /* absolute X position (in FB pixels) */ int32_t abs_y; /* absolute Y position (in FB pixels) */ + int32_t rel_z; /* relative Z motion (wheel) */ }; #define XENKBD_IN_EVENT_SIZE 40 From 1e892c959da42278e60b21f5ecfd6fba0efff313 Mon Sep 17 00:00:00 2001 From: Markus Armbruster Date: Mon, 26 May 2008 23:31:09 +0100 Subject: [PATCH 177/821] xen pvfb: Module aliases to support module autoloading These are mostly for completeness and consistency with the other frontends, as PVFB is typically compiled in rather than a module. Derived from http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/5e294e29a43e While there, add module descriptions. Signed-off-by: Markus Armbruster Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- drivers/input/xen-kbdfront.c | 2 ++ drivers/video/xen-fbfront.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c index 9da4452786fa..eaf69cf5b444 100644 --- a/drivers/input/xen-kbdfront.c +++ b/drivers/input/xen-kbdfront.c @@ -343,4 +343,6 @@ static void __exit xenkbd_cleanup(void) module_init(xenkbd_init); module_exit(xenkbd_cleanup); +MODULE_DESCRIPTION("Xen virtual keyboard/pointer device frontend"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("xen:vkbd"); diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c index 4e10876e62fc..5553e517563e 100644 --- a/drivers/video/xen-fbfront.c +++ b/drivers/video/xen-fbfront.c @@ -572,4 +572,6 @@ static void __exit xenfb_cleanup(void) module_init(xenfb_init); module_exit(xenfb_cleanup); +MODULE_DESCRIPTION("Xen virtual framebuffer device frontend"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("xen:vfb"); From f4ad1ebd7a0fae2782ef9f76c0b94b536742c3e8 Mon Sep 17 00:00:00 2001 From: Markus Armbruster Date: Mon, 26 May 2008 23:31:10 +0100 Subject: [PATCH 178/821] xen pvfb: Zero unused bytes in events sent to backend This isn't a security flaw (the backend can see all our memory anyway). But it's the right thing to do all the same. Signed-off-by: Markus Armbruster Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- drivers/video/xen-fbfront.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c index 5553e517563e..291eef695594 100644 --- a/drivers/video/xen-fbfront.c +++ b/drivers/video/xen-fbfront.c @@ -61,6 +61,7 @@ static void xenfb_do_update(struct xenfb_info *info, union xenfb_out_event event; u32 prod; + memset(&event, 0, sizeof(event)); event.type = XENFB_TYPE_UPDATE; event.update.x = x; event.update.y = y; From e4dcff1f6e7582f76c2c9990b1d9111bbc8e26ef Mon Sep 17 00:00:00 2001 From: Markus Armbruster Date: Mon, 26 May 2008 23:31:11 +0100 Subject: [PATCH 179/821] xen pvfb: Dynamic mode support (screen resizing) The pvfb backend indicates dynamic mode support by creating node feature_resize with a non-zero value in its xenstore directory. xen-fbfront sends a resize notification event on mode change. Fully backwards compatible both ways. Framebuffer size and initial resolution can be controlled through kernel parameter xen_fbfront.video. The backend enforces a separate size limit, which it advertises in node videoram in its xenstore directory. xen-kbdfront gets the maximum screen resolution from nodes width and height in the backend's xenstore directory instead of hardcoding it. Additional goodie: support for larger framebuffers (512M on a 64-bit system with 4K pages). Changing the number of bits per pixels dynamically is not supported, yet. Ported from http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/92f7b3144f41 http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/bfc040135633 Signed-off-by: Pat Campbell Signed-off-by: Markus Armbruster Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- drivers/input/xen-kbdfront.c | 10 ++ drivers/video/xen-fbfront.c | 183 +++++++++++++++++++++++++++----- include/xen/interface/io/fbif.h | 29 ++++- 3 files changed, 188 insertions(+), 34 deletions(-) diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c index eaf69cf5b444..9ce3b3baf3a2 100644 --- a/drivers/input/xen-kbdfront.c +++ b/drivers/input/xen-kbdfront.c @@ -300,6 +300,16 @@ InitWait: */ if (dev->state != XenbusStateConnected) goto InitWait; /* no InitWait seen yet, fudge it */ + + /* Set input abs params to match backend screen res */ + if (xenbus_scanf(XBT_NIL, info->xbdev->otherend, + "width", "%d", &val) > 0) + input_set_abs_params(info->ptr, ABS_X, 0, val, 0, 0); + + if (xenbus_scanf(XBT_NIL, info->xbdev->otherend, + "height", "%d", &val) > 0) + input_set_abs_params(info->ptr, ABS_Y, 0, val, 0, 0); + break; case XenbusStateClosing: diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c index 291eef695594..47ed39b52f9c 100644 --- a/drivers/video/xen-fbfront.c +++ b/drivers/video/xen-fbfront.c @@ -43,23 +43,47 @@ struct xenfb_info { struct xenfb_page *page; unsigned long *mfns; int update_wanted; /* XENFB_TYPE_UPDATE wanted */ + int feature_resize; /* XENFB_TYPE_RESIZE ok */ + struct xenfb_resize resize; /* protected by resize_lock */ + int resize_dpy; /* ditto */ + spinlock_t resize_lock; struct xenbus_device *xbdev; }; -static u32 xenfb_mem_len = XENFB_WIDTH * XENFB_HEIGHT * XENFB_DEPTH / 8; +#define XENFB_DEFAULT_FB_LEN (XENFB_WIDTH * XENFB_HEIGHT * XENFB_DEPTH / 8) + +enum { KPARAM_MEM, KPARAM_WIDTH, KPARAM_HEIGHT, KPARAM_CNT }; +static int video[KPARAM_CNT] = { 2, XENFB_WIDTH, XENFB_HEIGHT }; +module_param_array(video, int, NULL, 0); +MODULE_PARM_DESC(video, + "Video memory size in MB, width, height in pixels (default 2,800,600)"); static void xenfb_make_preferred_console(void); static int xenfb_remove(struct xenbus_device *); -static void xenfb_init_shared_page(struct xenfb_info *); +static void xenfb_init_shared_page(struct xenfb_info *, struct fb_info *); static int xenfb_connect_backend(struct xenbus_device *, struct xenfb_info *); static void xenfb_disconnect_backend(struct xenfb_info *); +static void xenfb_send_event(struct xenfb_info *info, + union xenfb_out_event *event) +{ + u32 prod; + + prod = info->page->out_prod; + /* caller ensures !xenfb_queue_full() */ + mb(); /* ensure ring space available */ + XENFB_OUT_RING_REF(info->page, prod) = *event; + wmb(); /* ensure ring contents visible */ + info->page->out_prod = prod + 1; + + notify_remote_via_irq(info->irq); +} + static void xenfb_do_update(struct xenfb_info *info, int x, int y, int w, int h) { union xenfb_out_event event; - u32 prod; memset(&event, 0, sizeof(event)); event.type = XENFB_TYPE_UPDATE; @@ -68,14 +92,19 @@ static void xenfb_do_update(struct xenfb_info *info, event.update.width = w; event.update.height = h; - prod = info->page->out_prod; /* caller ensures !xenfb_queue_full() */ - mb(); /* ensure ring space available */ - XENFB_OUT_RING_REF(info->page, prod) = event; - wmb(); /* ensure ring contents visible */ - info->page->out_prod = prod + 1; + xenfb_send_event(info, &event); +} - notify_remote_via_irq(info->irq); +static void xenfb_do_resize(struct xenfb_info *info) +{ + union xenfb_out_event event; + + memset(&event, 0, sizeof(event)); + event.resize = info->resize; + + /* caller ensures !xenfb_queue_full() */ + xenfb_send_event(info, &event); } static int xenfb_queue_full(struct xenfb_info *info) @@ -87,12 +116,28 @@ static int xenfb_queue_full(struct xenfb_info *info) return prod - cons == XENFB_OUT_RING_LEN; } +static void xenfb_handle_resize_dpy(struct xenfb_info *info) +{ + unsigned long flags; + + spin_lock_irqsave(&info->resize_lock, flags); + if (info->resize_dpy) { + if (!xenfb_queue_full(info)) { + info->resize_dpy = 0; + xenfb_do_resize(info); + } + } + spin_unlock_irqrestore(&info->resize_lock, flags); +} + static void xenfb_refresh(struct xenfb_info *info, int x1, int y1, int w, int h) { unsigned long flags; - int y2 = y1 + h - 1; int x2 = x1 + w - 1; + int y2 = y1 + h - 1; + + xenfb_handle_resize_dpy(info); if (!info->update_wanted) return; @@ -225,6 +270,57 @@ static ssize_t xenfb_write(struct fb_info *p, const char __user *buf, return res; } +static int +xenfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +{ + struct xenfb_info *xenfb_info; + int required_mem_len; + + xenfb_info = info->par; + + if (!xenfb_info->feature_resize) { + if (var->xres == video[KPARAM_WIDTH] && + var->yres == video[KPARAM_HEIGHT] && + var->bits_per_pixel == xenfb_info->page->depth) { + return 0; + } + return -EINVAL; + } + + /* Can't resize past initial width and height */ + if (var->xres > video[KPARAM_WIDTH] || var->yres > video[KPARAM_HEIGHT]) + return -EINVAL; + + required_mem_len = var->xres * var->yres * xenfb_info->page->depth / 8; + if (var->bits_per_pixel == xenfb_info->page->depth && + var->xres <= info->fix.line_length / (XENFB_DEPTH / 8) && + required_mem_len <= info->fix.smem_len) { + var->xres_virtual = var->xres; + var->yres_virtual = var->yres; + return 0; + } + return -EINVAL; +} + +static int xenfb_set_par(struct fb_info *info) +{ + struct xenfb_info *xenfb_info; + unsigned long flags; + + xenfb_info = info->par; + + spin_lock_irqsave(&xenfb_info->resize_lock, flags); + xenfb_info->resize.type = XENFB_TYPE_RESIZE; + xenfb_info->resize.width = info->var.xres; + xenfb_info->resize.height = info->var.yres; + xenfb_info->resize.stride = info->fix.line_length; + xenfb_info->resize.depth = info->var.bits_per_pixel; + xenfb_info->resize.offset = 0; + xenfb_info->resize_dpy = 1; + spin_unlock_irqrestore(&xenfb_info->resize_lock, flags); + return 0; +} + static struct fb_ops xenfb_fb_ops = { .owner = THIS_MODULE, .fb_read = fb_sys_read, @@ -233,6 +329,8 @@ static struct fb_ops xenfb_fb_ops = { .fb_fillrect = xenfb_fillrect, .fb_copyarea = xenfb_copyarea, .fb_imageblit = xenfb_imageblit, + .fb_check_var = xenfb_check_var, + .fb_set_par = xenfb_set_par, }; static irqreturn_t xenfb_event_handler(int rq, void *dev_id) @@ -261,6 +359,8 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, { struct xenfb_info *info; struct fb_info *fb_info; + int fb_size; + int val; int ret; info = kzalloc(sizeof(*info), GFP_KERNEL); @@ -268,18 +368,35 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, xenbus_dev_fatal(dev, -ENOMEM, "allocating info structure"); return -ENOMEM; } + + /* Limit kernel param videoram amount to what is in xenstore */ + if (xenbus_scanf(XBT_NIL, dev->otherend, "videoram", "%d", &val) == 1) { + if (val < video[KPARAM_MEM]) + video[KPARAM_MEM] = val; + } + + /* If requested res does not fit in available memory, use default */ + fb_size = video[KPARAM_MEM] * 1024 * 1024; + if (video[KPARAM_WIDTH] * video[KPARAM_HEIGHT] * XENFB_DEPTH / 8 + > fb_size) { + video[KPARAM_WIDTH] = XENFB_WIDTH; + video[KPARAM_HEIGHT] = XENFB_HEIGHT; + fb_size = XENFB_DEFAULT_FB_LEN; + } + dev->dev.driver_data = info; info->xbdev = dev; info->irq = -1; info->x1 = info->y1 = INT_MAX; spin_lock_init(&info->dirty_lock); + spin_lock_init(&info->resize_lock); - info->fb = vmalloc(xenfb_mem_len); + info->fb = vmalloc(fb_size); if (info->fb == NULL) goto error_nomem; - memset(info->fb, 0, xenfb_mem_len); + memset(info->fb, 0, fb_size); - info->nr_pages = (xenfb_mem_len + PAGE_SIZE - 1) >> PAGE_SHIFT; + info->nr_pages = (fb_size + PAGE_SIZE - 1) >> PAGE_SHIFT; info->mfns = vmalloc(sizeof(unsigned long) * info->nr_pages); if (!info->mfns) @@ -290,8 +407,6 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, if (!info->page) goto error_nomem; - xenfb_init_shared_page(info); - /* abusing framebuffer_alloc() to allocate pseudo_palette */ fb_info = framebuffer_alloc(sizeof(u32) * 256, NULL); if (fb_info == NULL) @@ -304,9 +419,9 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, fb_info->screen_base = info->fb; fb_info->fbops = &xenfb_fb_ops; - fb_info->var.xres_virtual = fb_info->var.xres = info->page->width; - fb_info->var.yres_virtual = fb_info->var.yres = info->page->height; - fb_info->var.bits_per_pixel = info->page->depth; + fb_info->var.xres_virtual = fb_info->var.xres = video[KPARAM_WIDTH]; + fb_info->var.yres_virtual = fb_info->var.yres = video[KPARAM_HEIGHT]; + fb_info->var.bits_per_pixel = XENFB_DEPTH; fb_info->var.red = (struct fb_bitfield){16, 8, 0}; fb_info->var.green = (struct fb_bitfield){8, 8, 0}; @@ -318,9 +433,9 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, fb_info->var.vmode = FB_VMODE_NONINTERLACED; fb_info->fix.visual = FB_VISUAL_TRUECOLOR; - fb_info->fix.line_length = info->page->line_length; + fb_info->fix.line_length = fb_info->var.xres * XENFB_DEPTH / 8; fb_info->fix.smem_start = 0; - fb_info->fix.smem_len = xenfb_mem_len; + fb_info->fix.smem_len = fb_size; strcpy(fb_info->fix.id, "xen"); fb_info->fix.type = FB_TYPE_PACKED_PIXELS; fb_info->fix.accel = FB_ACCEL_NONE; @@ -337,6 +452,8 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, fb_info->fbdefio = &xenfb_defio; fb_deferred_io_init(fb_info); + xenfb_init_shared_page(info, fb_info); + ret = register_framebuffer(fb_info); if (ret) { fb_deferred_io_cleanup(fb_info); @@ -389,7 +506,7 @@ static int xenfb_resume(struct xenbus_device *dev) struct xenfb_info *info = dev->dev.driver_data; xenfb_disconnect_backend(info); - xenfb_init_shared_page(info); + xenfb_init_shared_page(info, info->fb_info); return xenfb_connect_backend(dev, info); } @@ -417,20 +534,23 @@ static unsigned long vmalloc_to_mfn(void *address) return pfn_to_mfn(vmalloc_to_pfn(address)); } -static void xenfb_init_shared_page(struct xenfb_info *info) +static void xenfb_init_shared_page(struct xenfb_info *info, + struct fb_info *fb_info) { int i; + int epd = PAGE_SIZE / sizeof(info->mfns[0]); for (i = 0; i < info->nr_pages; i++) info->mfns[i] = vmalloc_to_mfn(info->fb + i * PAGE_SIZE); - info->page->pd[0] = vmalloc_to_mfn(info->mfns); - info->page->pd[1] = 0; - info->page->width = XENFB_WIDTH; - info->page->height = XENFB_HEIGHT; - info->page->depth = XENFB_DEPTH; - info->page->line_length = (info->page->depth / 8) * info->page->width; - info->page->mem_length = xenfb_mem_len; + for (i = 0; i * epd < info->nr_pages; i++) + info->page->pd[i] = vmalloc_to_mfn(&info->mfns[i * epd]); + + info->page->width = fb_info->var.xres; + info->page->height = fb_info->var.yres; + info->page->depth = fb_info->var.bits_per_pixel; + info->page->line_length = fb_info->fix.line_length; + info->page->mem_length = fb_info->fix.smem_len; info->page->in_cons = info->page->in_prod = 0; info->page->out_cons = info->page->out_prod = 0; } @@ -530,6 +650,11 @@ InitWait: val = 0; if (val) info->update_wanted = 1; + + if (xenbus_scanf(XBT_NIL, dev->otherend, + "feature-resize", "%d", &val) < 0) + val = 0; + info->feature_resize = val; break; case XenbusStateClosing: diff --git a/include/xen/interface/io/fbif.h b/include/xen/interface/io/fbif.h index 5a934dd7796d..974a51ed9165 100644 --- a/include/xen/interface/io/fbif.h +++ b/include/xen/interface/io/fbif.h @@ -49,11 +49,27 @@ struct xenfb_update { int32_t height; /* rect height */ }; +/* + * Framebuffer resize notification event + * Capable backend sets feature-resize in xenstore. + */ +#define XENFB_TYPE_RESIZE 3 + +struct xenfb_resize { + uint8_t type; /* XENFB_TYPE_RESIZE */ + int32_t width; /* width in pixels */ + int32_t height; /* height in pixels */ + int32_t stride; /* stride in bytes */ + int32_t depth; /* depth in bits */ + int32_t offset; /* start offset within framebuffer */ +}; + #define XENFB_OUT_EVENT_SIZE 40 union xenfb_out_event { uint8_t type; struct xenfb_update update; + struct xenfb_resize resize; char pad[XENFB_OUT_EVENT_SIZE]; }; @@ -105,15 +121,18 @@ struct xenfb_page { * Each directory page holds PAGE_SIZE / sizeof(*pd) * framebuffer pages, and can thus map up to PAGE_SIZE * * PAGE_SIZE / sizeof(*pd) bytes. With PAGE_SIZE == 4096 and - * sizeof(unsigned long) == 4, that's 4 Megs. Two directory - * pages should be enough for a while. + * sizeof(unsigned long) == 4/8, that's 4 Megs 32 bit and 2 + * Megs 64 bit. 256 directories give enough room for a 512 + * Meg framebuffer with a max resolution of 12,800x10,240. + * Should be enough for a while with room leftover for + * expansion. */ - unsigned long pd[2]; + unsigned long pd[256]; }; /* - * Wart: xenkbd needs to know resolution. Put it here until a better - * solution is found, but don't leak it to the backend. + * Wart: xenkbd needs to know default resolution. Put it here until a + * better solution is found, but don't leak it to the backend. */ #ifdef __KERNEL__ #define XENFB_WIDTH 800 From 83abc70a4c6e306f4c1672e25884322f797e4fcb Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:12 +0100 Subject: [PATCH 180/821] xen: make earlyprintk=xen work again For some perverse reason, if you call add_preferred_console() it prevents setup_early_printk() from successfully enabling the boot console - unless you make it a preferred console too... Also, make xenboot console output distinct from normal console output, since it gets repeated when the console handover happens, and the duplicated output is confusing without disambiguation. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner Cc: Markus Armbruster Cc: Gerd Hoffmann --- arch/x86/xen/enlighten.c | 1 + drivers/char/hvc_xen.c | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 6cfb708408e9..5c0635a8bffd 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1257,6 +1257,7 @@ asmlinkage void __init xen_start_kernel(void) boot_params.hdr.ramdisk_size = xen_start_info->mod_len; if (!is_initial_xendomain()) { + add_preferred_console("xenboot", 0, NULL); add_preferred_console("tty", 0, NULL); add_preferred_console("hvc", 0, NULL); } diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c index 2413af342a81..d5fe0a8952fa 100644 --- a/drivers/char/hvc_xen.c +++ b/drivers/char/hvc_xen.c @@ -155,6 +155,7 @@ static void xenboot_write_console(struct console *console, const char *string, raw_console_write(string, len); + write_console(0, "(early) ", 8); while (off < len && NULL != (pos = strchr(string+off, '\n'))) { linelen = pos-string+off; if (off + linelen > len) From ec9b2065d4d3b797604c09a569083dd9ff951b1b Mon Sep 17 00:00:00 2001 From: Isaku Yamahata Date: Mon, 26 May 2008 23:31:13 +0100 Subject: [PATCH 181/821] xen: Move manage.c to drivers/xen for ia64/xen support move arch/x86/xen/manage.c under drivers/xen/to share codes with x86 and ia64. ia64/xen also uses manage.c Signed-off-by: Isaku Yamahata Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/Makefile | 2 +- drivers/xen/Makefile | 2 +- {arch/x86 => drivers}/xen/manage.c | 0 3 files changed, 2 insertions(+), 2 deletions(-) rename {arch/x86 => drivers}/xen/manage.c (100%) diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile index 3d8df981d5fd..40b119b6b103 100644 --- a/arch/x86/xen/Makefile +++ b/arch/x86/xen/Makefile @@ -1,4 +1,4 @@ obj-y := enlighten.o setup.o multicalls.o mmu.o \ - time.o manage.o xen-asm.o grant-table.o + time.o xen-asm.o grant-table.o obj-$(CONFIG_SMP) += smp.o diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile index 37af04f1ffd9..363286c54290 100644 --- a/drivers/xen/Makefile +++ b/drivers/xen/Makefile @@ -1,4 +1,4 @@ -obj-y += grant-table.o features.o events.o +obj-y += grant-table.o features.o events.o manage.o obj-y += xenbus/ obj-$(CONFIG_XEN_XENCOMM) += xencomm.o obj-$(CONFIG_XEN_BALLOON) += balloon.o diff --git a/arch/x86/xen/manage.c b/drivers/xen/manage.c similarity index 100% rename from arch/x86/xen/manage.c rename to drivers/xen/manage.c From a90971ebddc81330f59203dee9803512aa4e2ef6 Mon Sep 17 00:00:00 2001 From: Isaku Yamahata Date: Mon, 26 May 2008 23:31:14 +0100 Subject: [PATCH 182/821] xen: compilation fix to balloon driver for ia64 support fix compilation error of ballon driver on ia64. extent_start member is pointer argument. On x86 pointer argument for xen hypercall is passed as virtual address. On the other hand, ia64 and ppc, pointer argument is passed in pseudo physical address. (guest physicall address.) So they must be passed as handle and convert right before issuing hypercall. CC drivers/xen/balloon.o linux-2.6-x86/drivers/xen/balloon.c: In function 'increase_reservation': linux-2.6-x86/drivers/xen/balloon.c:228: error: incompatible types in assignment linux-2.6-x86/drivers/xen/balloon.c: In function 'decrease_reservation': linux-2.6-x86/drivers/xen/balloon.c:324: error: incompatible types in assignment linux-2.6-x86/drivers/xen/balloon.c: In function 'dealloc_pte_fn': linux-2.6-x86/drivers/xen/balloon.c:486: error: incompatible types in assignment linux-2.6-x86/drivers/xen/balloon.c: In function 'alloc_empty_pages_and_pagevec': linux-2.6-x86/drivers/xen/balloon.c:522: error: incompatible types in assignment make[2]: *** [drivers/xen/balloon.o] Error 1 Signed-off-by: Isaku Yamahata Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- drivers/xen/balloon.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index ab25ba6cbbb9..097ba02ac809 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -225,7 +225,7 @@ static int increase_reservation(unsigned long nr_pages) page = balloon_next_page(page); } - reservation.extent_start = (unsigned long)frame_list; + set_xen_guest_handle(reservation.extent_start, frame_list); reservation.nr_extents = nr_pages; rc = HYPERVISOR_memory_op( XENMEM_populate_physmap, &reservation); @@ -321,7 +321,7 @@ static int decrease_reservation(unsigned long nr_pages) balloon_append(pfn_to_page(pfn)); } - reservation.extent_start = (unsigned long)frame_list; + set_xen_guest_handle(reservation.extent_start, frame_list); reservation.nr_extents = nr_pages; ret = HYPERVISOR_memory_op(XENMEM_decrease_reservation, &reservation); BUG_ON(ret != nr_pages); @@ -483,7 +483,7 @@ static int dealloc_pte_fn( .extent_order = 0, .domid = DOMID_SELF }; - reservation.extent_start = (unsigned long)&mfn; + set_xen_guest_handle(reservation.extent_start, &mfn); set_pte_at(&init_mm, addr, pte, __pte_ma(0ull)); set_phys_to_machine(__pa(addr) >> PAGE_SHIFT, INVALID_P2M_ENTRY); ret = HYPERVISOR_memory_op(XENMEM_decrease_reservation, &reservation); @@ -519,7 +519,7 @@ static struct page **alloc_empty_pages_and_pagevec(int nr_pages) .extent_order = 0, .domid = DOMID_SELF }; - reservation.extent_start = (unsigned long)&gmfn; + set_xen_guest_handle(reservation.extent_start, &gmfn); ret = HYPERVISOR_memory_op(XENMEM_decrease_reservation, &reservation); if (ret == 1) From bfdab126cfa6fe3c2ddb8b6007a38202b510b6c1 Mon Sep 17 00:00:00 2001 From: Isaku Yamahata Date: Mon, 26 May 2008 23:31:15 +0100 Subject: [PATCH 183/821] xen: add missing definitions in include/xen/interface/memory.h which ia64/xen needs Add xen handles realted definitions for xen memory which ia64/xen needs. Pointer argumsnts for ia64/xen hypercall are passed in pseudo physical address (guest physical address) so that it is required to convert guest kernel virtual address into pseudo physical address. The xen guest handle represents such arguments. Signed-off-by: Isaku Yamahata Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- include/xen/interface/memory.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/include/xen/interface/memory.h b/include/xen/interface/memory.h index da768469aa92..af36ead16817 100644 --- a/include/xen/interface/memory.h +++ b/include/xen/interface/memory.h @@ -29,7 +29,7 @@ struct xen_memory_reservation { * OUT: GMFN bases of extents that were allocated * (NB. This command also updates the mach_to_phys translation table) */ - ulong extent_start; + GUEST_HANDLE(ulong) extent_start; /* Number of extents, and size/alignment of each (2^extent_order pages). */ unsigned long nr_extents; @@ -50,6 +50,7 @@ struct xen_memory_reservation { domid_t domid; }; +DEFINE_GUEST_HANDLE_STRUCT(xen_memory_reservation); /* * Returns the maximum machine frame number of mapped RAM in this system. @@ -85,7 +86,7 @@ struct xen_machphys_mfn_list { * any large discontiguities in the machine address space, 2MB gaps in * the machphys table will be represented by an MFN base of zero. */ - ulong extent_start; + GUEST_HANDLE(ulong) extent_start; /* * Number of extents written to the above array. This will be smaller @@ -93,6 +94,7 @@ struct xen_machphys_mfn_list { */ unsigned int nr_extents; }; +DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mfn_list); /* * Sets the GPFN at which a particular page appears in the specified guest's @@ -115,6 +117,7 @@ struct xen_add_to_physmap { /* GPFN where the source mapping page should appear. */ unsigned long gpfn; }; +DEFINE_GUEST_HANDLE_STRUCT(xen_add_to_physmap); /* * Translates a list of domain-specific GPFNs into MFNs. Returns a -ve error @@ -129,13 +132,14 @@ struct xen_translate_gpfn_list { unsigned long nr_gpfns; /* List of GPFNs to translate. */ - ulong gpfn_list; + GUEST_HANDLE(ulong) gpfn_list; /* * Output list to contain MFN translations. May be the same as the input * list (in which case each input GPFN is overwritten with the output MFN). */ - ulong mfn_list; + GUEST_HANDLE(ulong) mfn_list; }; +DEFINE_GUEST_HANDLE_STRUCT(xen_translate_gpfn_list); #endif /* __XEN_PUBLIC_MEMORY_H__ */ From 38bb5ab4179572f4d24d3ca7188172a31ca51a69 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:16 +0100 Subject: [PATCH 184/821] xen: count resched interrupts properly Make sure resched interrupts appear in /proc/interrupts in the proper place. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/smp.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 94e69000f982..74ab8968c525 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -65,6 +65,12 @@ static struct call_data_struct *call_data; */ static irqreturn_t xen_reschedule_interrupt(int irq, void *dev_id) { +#ifdef CONFIG_X86_32 + __get_cpu_var(irq_stat).irq_resched_count++; +#else + add_pda(irq_resched_count, 1); +#endif + return IRQ_HANDLED; } From 955d6f1778da5a9795f2dfb07f760006f194609a Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 26 May 2008 23:31:17 +0100 Subject: [PATCH 185/821] xen: drivers/xen/balloon.c: make a function static Make the needlessly global balloon_set_new_target() static. Signed-off-by: Adrian Bunk Acked-by: Chris Wright Signed-off-by: Andrew Morton Signed-off-by: Thomas Gleixner --- drivers/xen/balloon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index 097ba02ac809..591bc29b55f5 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -368,7 +368,7 @@ static void balloon_process(struct work_struct *work) } /* Resets the Xen limit, sets new target, and kicks off processing. */ -void balloon_set_new_target(unsigned long target) +static void balloon_set_new_target(unsigned long target) { /* No need for lock. Not read-modify-write updates. */ balloon_stats.hard_limit = ~0UL; From d451bb7aa852627bdf7be7937dc3d9d9f261b235 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:18 +0100 Subject: [PATCH 186/821] xen: make phys_to_machine structure dynamic We now support the use of memory hotplug, so the physical to machine page mapping structure must be dynamic. This is implemented as a two-level radix tree structure, which allows us to efficiently incrementally allocate memory for the p2m table as new pages are added. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/enlighten.c | 2 +- arch/x86/xen/mmu.c | 85 ++++++++++++++++++++++++++++++++++++++ arch/x86/xen/setup.c | 2 - arch/x86/xen/xen-ops.h | 2 + include/asm-x86/xen/page.h | 20 +++------ 5 files changed, 94 insertions(+), 17 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 5c0635a8bffd..73d3c84a3495 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1221,7 +1221,7 @@ asmlinkage void __init xen_start_kernel(void) /* Get mfn list */ if (!xen_feature(XENFEAT_auto_translated_physmap)) - phys_to_machine_mapping = (unsigned long *)xen_start_info->mfn_list; + xen_build_dynamic_phys_to_machine(); pgd = (pgd_t *)xen_start_info->pt_base; diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 07c2653ec335..c3b27dec6f03 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -56,6 +56,91 @@ #include "multicalls.h" #include "mmu.h" +/* + * This should probably be a config option. On 32-bit, it costs 1 + * page/gig of memory; on 64-bit its 2 pages/gig. If we want it to be + * completely unbounded we can add another level to the p2m structure. + */ +#define MAX_GUEST_PAGES (16ull * 1024*1024*1024 / PAGE_SIZE) +#define P2M_ENTRIES_PER_PAGE (PAGE_SIZE / sizeof(unsigned long)) + +static unsigned long *p2m_top[MAX_GUEST_PAGES / P2M_ENTRIES_PER_PAGE]; + +static inline unsigned p2m_top_index(unsigned long pfn) +{ + BUG_ON(pfn >= MAX_GUEST_PAGES); + return pfn / P2M_ENTRIES_PER_PAGE; +} + +static inline unsigned p2m_index(unsigned long pfn) +{ + return pfn % P2M_ENTRIES_PER_PAGE; +} + +void __init xen_build_dynamic_phys_to_machine(void) +{ + unsigned pfn; + unsigned long *mfn_list = (unsigned long *)xen_start_info->mfn_list; + + BUG_ON(xen_start_info->nr_pages >= MAX_GUEST_PAGES); + + for(pfn = 0; + pfn < xen_start_info->nr_pages; + pfn += P2M_ENTRIES_PER_PAGE) { + unsigned topidx = p2m_top_index(pfn); + + p2m_top[topidx] = &mfn_list[pfn]; + } +} + +unsigned long get_phys_to_machine(unsigned long pfn) +{ + unsigned topidx, idx; + + topidx = p2m_top_index(pfn); + if (p2m_top[topidx] == NULL) + return INVALID_P2M_ENTRY; + + idx = p2m_index(pfn); + return p2m_top[topidx][idx]; +} + +static void alloc_p2m(unsigned long **pp) +{ + unsigned long *p; + unsigned i; + + p = (void *)__get_free_page(GFP_KERNEL | __GFP_NOFAIL); + BUG_ON(p == NULL); + + for(i = 0; i < P2M_ENTRIES_PER_PAGE; i++) + p[i] = INVALID_P2M_ENTRY; + + if (cmpxchg(pp, NULL, p) != NULL) + free_page((unsigned long)p); +} + +void set_phys_to_machine(unsigned long pfn, unsigned long mfn) +{ + unsigned topidx, idx; + + if (unlikely(xen_feature(XENFEAT_auto_translated_physmap))) { + BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY); + return; + } + + topidx = p2m_top_index(pfn); + if (p2m_top[topidx] == NULL) { + /* no need to allocate a page to store an invalid entry */ + if (mfn == INVALID_P2M_ENTRY) + return; + alloc_p2m(&p2m_top[topidx]); + } + + idx = p2m_index(pfn); + p2m_top[topidx][idx] = mfn; +} + xmaddr_t arbitrary_virt_to_machine(unsigned long address) { unsigned int level; diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 82517e4a752a..37f8f0b8f743 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -27,8 +27,6 @@ extern const char xen_hypervisor_callback[]; extern const char xen_failsafe_callback[]; -unsigned long *phys_to_machine_mapping; -EXPORT_SYMBOL(phys_to_machine_mapping); /** * machine_specific_memory_setup - Hook for machine specific memory setup. diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index f1063ae08037..7bdc8c5c9244 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -22,6 +22,8 @@ void __init xen_arch_setup(void); void __init xen_init_IRQ(void); void xen_enable_sysenter(void); +void __init xen_build_dynamic_phys_to_machine(void); + void xen_setup_timer(int cpu); void xen_setup_cpu_clockevents(void); unsigned long xen_cpu_khz(void); diff --git a/include/asm-x86/xen/page.h b/include/asm-x86/xen/page.h index e11f24038b1d..293344f8102e 100644 --- a/include/asm-x86/xen/page.h +++ b/include/asm-x86/xen/page.h @@ -26,15 +26,15 @@ typedef struct xpaddr { #define FOREIGN_FRAME_BIT (1UL<<31) #define FOREIGN_FRAME(m) ((m) | FOREIGN_FRAME_BIT) -extern unsigned long *phys_to_machine_mapping; +extern unsigned long get_phys_to_machine(unsigned long pfn); +extern void set_phys_to_machine(unsigned long pfn, unsigned long mfn); static inline unsigned long pfn_to_mfn(unsigned long pfn) { if (xen_feature(XENFEAT_auto_translated_physmap)) return pfn; - return phys_to_machine_mapping[(unsigned int)(pfn)] & - ~FOREIGN_FRAME_BIT; + return get_phys_to_machine(pfn) & ~FOREIGN_FRAME_BIT; } static inline int phys_to_machine_mapping_valid(unsigned long pfn) @@ -42,7 +42,7 @@ static inline int phys_to_machine_mapping_valid(unsigned long pfn) if (xen_feature(XENFEAT_auto_translated_physmap)) return 1; - return (phys_to_machine_mapping[pfn] != INVALID_P2M_ENTRY); + return get_phys_to_machine(pfn) != INVALID_P2M_ENTRY; } static inline unsigned long mfn_to_pfn(unsigned long mfn) @@ -106,20 +106,12 @@ static inline unsigned long mfn_to_local_pfn(unsigned long mfn) unsigned long pfn = mfn_to_pfn(mfn); if ((pfn < max_mapnr) && !xen_feature(XENFEAT_auto_translated_physmap) - && (phys_to_machine_mapping[pfn] != mfn)) + && (get_phys_to_machine(pfn) != mfn)) return max_mapnr; /* force !pfn_valid() */ + /* XXX fixme; not true with sparsemem */ return pfn; } -static inline void set_phys_to_machine(unsigned long pfn, unsigned long mfn) -{ - if (xen_feature(XENFEAT_auto_translated_physmap)) { - BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY); - return; - } - phys_to_machine_mapping[pfn] = mfn; -} - /* VIRT <-> MACHINE conversion */ #define virt_to_machine(v) (phys_to_machine(XPADDR(__pa(v)))) #define virt_to_mfn(v) (pfn_to_mfn(PFN_DOWN(__pa(v)))) From 8006ec3e911f93d702e1d4a4e387e244ab434924 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:19 +0100 Subject: [PATCH 187/821] xen: add configurable max domain size Add a config option to set the max size of a Xen domain. This is used to scale the size of the physical-to-machine array; it ends up using around 1 page/GByte, so there's no reason to be very restrictive. For a 32-bit guest, the default value of 8GB is probably sufficient; there's not much point in giving a 32-bit machine much more memory than that. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/Kconfig | 10 ++++++++++ arch/x86/xen/mmu.c | 25 ++++++++++++------------- arch/x86/xen/setup.c | 3 +++ include/asm-x86/xen/page.h | 5 +++++ 4 files changed, 30 insertions(+), 13 deletions(-) diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig index 525b108411bd..d0f1c7c5dc3d 100644 --- a/arch/x86/xen/Kconfig +++ b/arch/x86/xen/Kconfig @@ -11,3 +11,13 @@ config XEN This is the Linux Xen port. Enabling this will allow the kernel to boot in a paravirtualized environment under the Xen hypervisor. + +config XEN_MAX_DOMAIN_MEMORY + int "Maximum allowed size of a domain in gigabytes" + default 8 + depends on XEN + help + The pseudo-physical to machine address array is sized + according to the maximum possible memory size of a Xen + domain. This array uses 1 page per gigabyte, so there's no + need to be too stingy here. \ No newline at end of file diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index c3b27dec6f03..644232aa7bfb 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -56,19 +56,13 @@ #include "multicalls.h" #include "mmu.h" -/* - * This should probably be a config option. On 32-bit, it costs 1 - * page/gig of memory; on 64-bit its 2 pages/gig. If we want it to be - * completely unbounded we can add another level to the p2m structure. - */ -#define MAX_GUEST_PAGES (16ull * 1024*1024*1024 / PAGE_SIZE) #define P2M_ENTRIES_PER_PAGE (PAGE_SIZE / sizeof(unsigned long)) -static unsigned long *p2m_top[MAX_GUEST_PAGES / P2M_ENTRIES_PER_PAGE]; +static unsigned long *p2m_top[MAX_DOMAIN_PAGES / P2M_ENTRIES_PER_PAGE]; static inline unsigned p2m_top_index(unsigned long pfn) { - BUG_ON(pfn >= MAX_GUEST_PAGES); + BUG_ON(pfn >= MAX_DOMAIN_PAGES); return pfn / P2M_ENTRIES_PER_PAGE; } @@ -81,12 +75,9 @@ void __init xen_build_dynamic_phys_to_machine(void) { unsigned pfn; unsigned long *mfn_list = (unsigned long *)xen_start_info->mfn_list; + unsigned long max_pfn = min(MAX_DOMAIN_PAGES, xen_start_info->nr_pages); - BUG_ON(xen_start_info->nr_pages >= MAX_GUEST_PAGES); - - for(pfn = 0; - pfn < xen_start_info->nr_pages; - pfn += P2M_ENTRIES_PER_PAGE) { + for(pfn = 0; pfn < max_pfn; pfn += P2M_ENTRIES_PER_PAGE) { unsigned topidx = p2m_top_index(pfn); p2m_top[topidx] = &mfn_list[pfn]; @@ -97,6 +88,9 @@ unsigned long get_phys_to_machine(unsigned long pfn) { unsigned topidx, idx; + if (unlikely(pfn >= MAX_DOMAIN_PAGES)) + return INVALID_P2M_ENTRY; + topidx = p2m_top_index(pfn); if (p2m_top[topidx] == NULL) return INVALID_P2M_ENTRY; @@ -129,6 +123,11 @@ void set_phys_to_machine(unsigned long pfn, unsigned long mfn) return; } + if (unlikely(pfn >= MAX_DOMAIN_PAGES)) { + BUG_ON(mfn != INVALID_P2M_ENTRY); + return; + } + topidx = p2m_top_index(pfn); if (p2m_top[topidx] == NULL) { /* no need to allocate a page to store an invalid entry */ diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 37f8f0b8f743..488447878a9d 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -16,6 +16,7 @@ #include #include +#include #include #include #include @@ -36,6 +37,8 @@ char * __init xen_memory_setup(void) { unsigned long max_pfn = xen_start_info->nr_pages; + max_pfn = min(MAX_DOMAIN_PAGES, max_pfn); + e820.nr_map = 0; add_memory_region(0, LOWMEMSIZE(), E820_RAM); add_memory_region(HIGH_MEMORY, PFN_PHYS(max_pfn)-HIGH_MEMORY, E820_RAM); diff --git a/include/asm-x86/xen/page.h b/include/asm-x86/xen/page.h index 293344f8102e..377c04591c15 100644 --- a/include/asm-x86/xen/page.h +++ b/include/asm-x86/xen/page.h @@ -26,6 +26,11 @@ typedef struct xpaddr { #define FOREIGN_FRAME_BIT (1UL<<31) #define FOREIGN_FRAME(m) ((m) | FOREIGN_FRAME_BIT) +/* Maximum amount of memory we can handle in a domain in pages */ +#define MAX_DOMAIN_PAGES \ + ((unsigned long)((u64)CONFIG_XEN_MAX_DOMAIN_MEMORY * 1024 * 1024 * 1024 / PAGE_SIZE)) + + extern unsigned long get_phys_to_machine(unsigned long pfn); extern void set_phys_to_machine(unsigned long pfn, unsigned long mfn); From cf0923ea295ba08ae656ef04164a43cb6553ba99 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:20 +0100 Subject: [PATCH 188/821] xen: efficiently support a holey p2m table When using sparsemem and memory hotplug, the kernel's pseudo-physical address space can be discontigious. Previously this was dealt with by having the upper parts of the radix tree stubbed off. Unfortunately, this is incompatible with save/restore, which requires a complete p2m table. The solution is to have a special distinguished all-invalid p2m leaf page, which we can point all the hole areas at. This allows the tools to see a complete p2m table, but it only costs a page for all memory holes. It also simplifies the code since it removes a few special cases. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/mmu.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 644232aa7bfb..da7b45b05066 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -57,8 +57,17 @@ #include "mmu.h" #define P2M_ENTRIES_PER_PAGE (PAGE_SIZE / sizeof(unsigned long)) +#define TOP_ENTRIES (MAX_DOMAIN_PAGES / P2M_ENTRIES_PER_PAGE) -static unsigned long *p2m_top[MAX_DOMAIN_PAGES / P2M_ENTRIES_PER_PAGE]; +/* Placeholder for holes in the address space */ +static unsigned long p2m_missing[P2M_ENTRIES_PER_PAGE] + __attribute__((section(".data.page_aligned"))) = + { [ 0 ... P2M_ENTRIES_PER_PAGE-1 ] = ~0UL }; + + /* Array of pointers to pages containing p2m entries */ +static unsigned long *p2m_top[TOP_ENTRIES] + __attribute__((section(".data.page_aligned"))) = + { [ 0 ... TOP_ENTRIES - 1] = &p2m_missing[0] }; static inline unsigned p2m_top_index(unsigned long pfn) { @@ -92,9 +101,6 @@ unsigned long get_phys_to_machine(unsigned long pfn) return INVALID_P2M_ENTRY; topidx = p2m_top_index(pfn); - if (p2m_top[topidx] == NULL) - return INVALID_P2M_ENTRY; - idx = p2m_index(pfn); return p2m_top[topidx][idx]; } @@ -110,7 +116,7 @@ static void alloc_p2m(unsigned long **pp) for(i = 0; i < P2M_ENTRIES_PER_PAGE; i++) p[i] = INVALID_P2M_ENTRY; - if (cmpxchg(pp, NULL, p) != NULL) + if (cmpxchg(pp, p2m_missing, p) != p2m_missing) free_page((unsigned long)p); } @@ -129,7 +135,7 @@ void set_phys_to_machine(unsigned long pfn, unsigned long mfn) } topidx = p2m_top_index(pfn); - if (p2m_top[topidx] == NULL) { + if (p2m_top[topidx] == p2m_missing) { /* no need to allocate a page to store an invalid entry */ if (mfn == INVALID_P2M_ENTRY) return; From a0d695c821544947342a2d372ec4108bc813b979 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:21 +0100 Subject: [PATCH 189/821] xen: make dummy_shared_info non-static Rename dummy_shared_info to xen_dummy_shared_info and make it non-static, in anticipation of users outside of enlighten.c Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/enlighten.c | 6 +++--- arch/x86/xen/xen-ops.h | 1 + 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 73d3c84a3495..d9faaa26c104 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -75,13 +75,13 @@ DEFINE_PER_CPU(unsigned long, xen_current_cr3); /* actual vcpu cr3 */ struct start_info *xen_start_info; EXPORT_SYMBOL_GPL(xen_start_info); -static /* __initdata */ struct shared_info dummy_shared_info; +struct shared_info xen_dummy_shared_info; /* * Point at some empty memory to start with. We map the real shared_info * page as soon as fixmap is up and running. */ -struct shared_info *HYPERVISOR_shared_info = (void *)&dummy_shared_info; +struct shared_info *HYPERVISOR_shared_info = (void *)&xen_dummy_shared_info; /* * Flag to determine whether vcpu info placement is available on all @@ -104,7 +104,7 @@ static void __init xen_vcpu_setup(int cpu) int err; struct vcpu_info *vcpup; - BUG_ON(HYPERVISOR_shared_info == &dummy_shared_info); + BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info); per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu]; if (!have_vcpu_info_placement) diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 7bdc8c5c9244..826d6e4c3dac 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -15,6 +15,7 @@ DECLARE_PER_CPU(unsigned long, xen_cr3); DECLARE_PER_CPU(unsigned long, xen_current_cr3); extern struct start_info *xen_start_info; +extern struct shared_info xen_dummy_shared_info; extern struct shared_info *HYPERVISOR_shared_info; char * __init xen_memory_setup(void); From d5edbc1f75420935b1ec7e65df10c8f81cea82de Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:22 +0100 Subject: [PATCH 190/821] xen: add p2m mfn_list_list When saving a domain, the Xen tools need to remap all our mfns to portable pfns. In order to remap our p2m table, it needs to know where all its pages are, so maintain the references to the p2m table for it to use. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/enlighten.c | 2 ++ arch/x86/xen/mmu.c | 39 ++++++++++++++++++++++++++++++++++++--- arch/x86/xen/xen-ops.h | 2 ++ 3 files changed, 40 insertions(+), 3 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index d9faaa26c104..ce67dc8f36af 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -880,6 +880,8 @@ static __init void setup_shared_info(void) /* In UP this is as good a place as any to set up shared info */ xen_setup_vcpu_info_placement(); #endif + + xen_setup_mfn_list_list(); } static __init void xen_pagetable_setup_done(pgd_t *base) diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index da7b45b05066..4740cda36563 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -69,6 +69,13 @@ static unsigned long *p2m_top[TOP_ENTRIES] __attribute__((section(".data.page_aligned"))) = { [ 0 ... TOP_ENTRIES - 1] = &p2m_missing[0] }; +/* Arrays of p2m arrays expressed in mfns used for save/restore */ +static unsigned long p2m_top_mfn[TOP_ENTRIES] + __attribute__((section(".bss.page_aligned"))); + +static unsigned long p2m_top_mfn_list[TOP_ENTRIES / P2M_ENTRIES_PER_PAGE] + __attribute__((section(".bss.page_aligned"))); + static inline unsigned p2m_top_index(unsigned long pfn) { BUG_ON(pfn >= MAX_DOMAIN_PAGES); @@ -80,11 +87,35 @@ static inline unsigned p2m_index(unsigned long pfn) return pfn % P2M_ENTRIES_PER_PAGE; } +/* Build the parallel p2m_top_mfn structures */ +void xen_setup_mfn_list_list(void) +{ + unsigned pfn, idx; + + for(pfn = 0; pfn < MAX_DOMAIN_PAGES; pfn += P2M_ENTRIES_PER_PAGE) { + unsigned topidx = p2m_top_index(pfn); + + p2m_top_mfn[topidx] = virt_to_mfn(p2m_top[topidx]); + } + + for(idx = 0; idx < ARRAY_SIZE(p2m_top_mfn_list); idx++) { + unsigned topidx = idx * P2M_ENTRIES_PER_PAGE; + p2m_top_mfn_list[idx] = virt_to_mfn(&p2m_top_mfn[topidx]); + } + + BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info); + + HYPERVISOR_shared_info->arch.pfn_to_mfn_frame_list_list = + virt_to_mfn(p2m_top_mfn_list); + HYPERVISOR_shared_info->arch.max_pfn = xen_start_info->nr_pages; +} + +/* Set up p2m_top to point to the domain-builder provided p2m pages */ void __init xen_build_dynamic_phys_to_machine(void) { - unsigned pfn; unsigned long *mfn_list = (unsigned long *)xen_start_info->mfn_list; unsigned long max_pfn = min(MAX_DOMAIN_PAGES, xen_start_info->nr_pages); + unsigned pfn; for(pfn = 0; pfn < max_pfn; pfn += P2M_ENTRIES_PER_PAGE) { unsigned topidx = p2m_top_index(pfn); @@ -105,7 +136,7 @@ unsigned long get_phys_to_machine(unsigned long pfn) return p2m_top[topidx][idx]; } -static void alloc_p2m(unsigned long **pp) +static void alloc_p2m(unsigned long **pp, unsigned long *mfnp) { unsigned long *p; unsigned i; @@ -118,6 +149,8 @@ static void alloc_p2m(unsigned long **pp) if (cmpxchg(pp, p2m_missing, p) != p2m_missing) free_page((unsigned long)p); + else + *mfnp = virt_to_mfn(p); } void set_phys_to_machine(unsigned long pfn, unsigned long mfn) @@ -139,7 +172,7 @@ void set_phys_to_machine(unsigned long pfn, unsigned long mfn) /* no need to allocate a page to store an invalid entry */ if (mfn == INVALID_P2M_ENTRY) return; - alloc_p2m(&p2m_top[topidx]); + alloc_p2m(&p2m_top[topidx], &p2m_top_mfn[topidx]); } idx = p2m_index(pfn); diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 826d6e4c3dac..a1bc89a8f169 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -18,6 +18,8 @@ extern struct start_info *xen_start_info; extern struct shared_info xen_dummy_shared_info; extern struct shared_info *HYPERVISOR_shared_info; +void xen_setup_mfn_list_list(void); + char * __init xen_memory_setup(void); void __init xen_arch_setup(void); void __init xen_init_IRQ(void); From eb1e305f4ef201e549ffd475b7dcbcd4ec36d7dc Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:23 +0100 Subject: [PATCH 191/821] xen: add rebind_evtchn_irq Add rebind_evtchn_irq(), which will rebind an device driver's existing irq to a new event channel on restore. Since the new event channel will be masked and bound to vcpu0, we update the state accordingly and unmask the irq once everything is set up. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- drivers/xen/events.c | 27 +++++++++++++++++++++++++++ include/xen/events.h | 1 + 2 files changed, 28 insertions(+) diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 4f0f22b020ea..f64e9798129c 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -557,6 +557,33 @@ out: put_cpu(); } +/* Rebind a new event channel to an existing irq. */ +void rebind_evtchn_irq(int evtchn, int irq) +{ + /* Make sure the irq is masked, since the new event channel + will also be masked. */ + disable_irq(irq); + + spin_lock(&irq_mapping_update_lock); + + /* After resume the irq<->evtchn mappings are all cleared out */ + BUG_ON(evtchn_to_irq[evtchn] != -1); + /* Expect irq to have been bound before, + so the bindcount should be non-0 */ + BUG_ON(irq_bindcount[irq] == 0); + + evtchn_to_irq[evtchn] = irq; + irq_info[irq] = mk_irq_info(IRQT_EVTCHN, 0, evtchn); + + spin_unlock(&irq_mapping_update_lock); + + /* new event channels are always bound to cpu 0 */ + irq_set_affinity(irq, cpumask_of_cpu(0)); + + /* Unmask the event channel. */ + enable_irq(irq); +} + /* Rebind an evtchn so that it gets delivered to a specific cpu */ static void rebind_irq_to_cpu(unsigned irq, unsigned tcpu) { diff --git a/include/xen/events.h b/include/xen/events.h index acd8e062c85f..a82ec0c45c38 100644 --- a/include/xen/events.h +++ b/include/xen/events.h @@ -32,6 +32,7 @@ void unbind_from_irqhandler(unsigned int irq, void *dev_id); void xen_send_IPI_one(unsigned int cpu, enum ipi_vector vector); int resend_irq_on_evtchn(unsigned int irq); +void rebind_evtchn_irq(int evtchn, int irq); static inline void notify_remote_via_evtchn(int port) { From 0f2287ad7c61f10b2a22a06e2a66cdbbbfc44ad0 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:24 +0100 Subject: [PATCH 192/821] xen: fix unbind_from_irq() Rearrange the tests in unbind_from_irq() so that we can still unbind an irq even if the underlying event channel is bad. This allows a device driver to shuffle its irqs on save/restore before the underlying event channels have been fixed up. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- drivers/xen/events.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/xen/events.c b/drivers/xen/events.c index f64e9798129c..70375a690761 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -355,7 +355,7 @@ static void unbind_from_irq(unsigned int irq) spin_lock(&irq_mapping_update_lock); - if (VALID_EVTCHN(evtchn) && (--irq_bindcount[irq] == 0)) { + if ((--irq_bindcount[irq] == 0) && VALID_EVTCHN(evtchn)) { close.port = evtchn; if (HYPERVISOR_event_channel_op(EVTCHNOP_close, &close) != 0) BUG(); @@ -375,7 +375,7 @@ static void unbind_from_irq(unsigned int irq) evtchn_to_irq[evtchn] = -1; irq_info[irq] = IRQ_UNBOUND; - dynamic_irq_init(irq); + dynamic_irq_cleanup(irq); } spin_unlock(&irq_mapping_update_lock); From 6b9b732d0e396a3f1a95977162a8624aafce38a1 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:25 +0100 Subject: [PATCH 193/821] xen-console: add save/restore Add code to: 1. Deal with the console page being canonicalized. During save, the console's mfn in the start_info structure is canonicalized to a pfn. In order to deal with that, we always use a copy of the pfn and indirect off that all the time. However, we fall back to using the mfn if the pfn hasn't been initialized yet. 2. Restore the console event channel, and rebind it to the existing irq. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- drivers/char/hvc_xen.c | 25 +++++++++++++++++++++---- include/xen/hvc-console.h | 2 ++ 2 files changed, 23 insertions(+), 4 deletions(-) diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c index d5fe0a8952fa..db2ae4216279 100644 --- a/drivers/char/hvc_xen.c +++ b/drivers/char/hvc_xen.c @@ -39,9 +39,14 @@ static int xencons_irq; /* ------------------------------------------------------------------ */ +static unsigned long console_pfn = ~0ul; + static inline struct xencons_interface *xencons_interface(void) { - return mfn_to_virt(xen_start_info->console.domU.mfn); + if (console_pfn == ~0ul) + return mfn_to_virt(xen_start_info->console.domU.mfn); + else + return __va(console_pfn << PAGE_SHIFT); } static inline void notify_daemon(void) @@ -101,20 +106,32 @@ static int __init xen_init(void) { struct hvc_struct *hp; - if (!is_running_on_xen()) - return 0; + if (!is_running_on_xen() || + is_initial_xendomain() || + !xen_start_info->console.domU.evtchn) + return -ENODEV; xencons_irq = bind_evtchn_to_irq(xen_start_info->console.domU.evtchn); if (xencons_irq < 0) - xencons_irq = 0 /* NO_IRQ */; + xencons_irq = 0; /* NO_IRQ */ + hp = hvc_alloc(HVC_COOKIE, xencons_irq, &hvc_ops, 256); if (IS_ERR(hp)) return PTR_ERR(hp); hvc = hp; + + console_pfn = mfn_to_pfn(xen_start_info->console.domU.mfn); + return 0; } +void xen_console_resume(void) +{ + if (xencons_irq) + rebind_evtchn_irq(xen_start_info->console.domU.evtchn, xencons_irq); +} + static void __exit xen_fini(void) { if (hvc) diff --git a/include/xen/hvc-console.h b/include/xen/hvc-console.h index efc3237ab990..fd5483a059bb 100644 --- a/include/xen/hvc-console.h +++ b/include/xen/hvc-console.h @@ -3,6 +3,8 @@ extern struct console xenboot_console; +void xen_console_resume(void); + void xen_raw_console_write(const char *str); void xen_raw_printk(const char *fmt, ...); From 7d88d32a4670af583c896e5ecd3929b78538ca62 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:26 +0100 Subject: [PATCH 194/821] xenbus: rebind irq on restore When restoring, rebind the existing xenbus irq to the new xenbus event channel. (It turns out in practice that this is always the same, and is never updated on restore. That's a bug, but Xeno-linux has been like this for a long time, so it can't really be fixed.) Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- drivers/xen/xenbus/xenbus_comms.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/xen/xenbus/xenbus_comms.c b/drivers/xen/xenbus/xenbus_comms.c index 6efbe3f29ca5..090c61ee8fd0 100644 --- a/drivers/xen/xenbus/xenbus_comms.c +++ b/drivers/xen/xenbus/xenbus_comms.c @@ -203,7 +203,6 @@ int xb_read(void *data, unsigned len) int xb_init_comms(void) { struct xenstore_domain_interface *intf = xen_store_interface; - int err; if (intf->req_prod != intf->req_cons) printk(KERN_ERR "XENBUS request ring is not quiescent " @@ -216,18 +215,20 @@ int xb_init_comms(void) intf->rsp_cons = intf->rsp_prod; } - if (xenbus_irq) - unbind_from_irqhandler(xenbus_irq, &xb_waitq); + if (xenbus_irq) { + /* Already have an irq; assume we're resuming */ + rebind_evtchn_irq(xen_store_evtchn, xenbus_irq); + } else { + int err; + err = bind_evtchn_to_irqhandler(xen_store_evtchn, wake_waiting, + 0, "xenbus", &xb_waitq); + if (err <= 0) { + printk(KERN_ERR "XENBUS request irq failed %i\n", err); + return err; + } - err = bind_evtchn_to_irqhandler( - xen_store_evtchn, wake_waiting, - 0, "xenbus", &xb_waitq); - if (err <= 0) { - printk(KERN_ERR "XENBUS request irq failed %i\n", err); - return err; + xenbus_irq = err; } - xenbus_irq = err; - return 0; } From 0e91398f2a5d4eb6b07df8115917d0d1cf3e9b58 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:27 +0100 Subject: [PATCH 195/821] xen: implement save/restore This patch implements Xen save/restore and migration. Saving is triggered via xenbus, which is polled in drivers/xen/manage.c. When a suspend request comes in, the kernel prepares itself for saving by: 1 - Freeze all processes. This is primarily to prevent any partially-completed pagetable updates from confusing the suspend process. If CONFIG_PREEMPT isn't defined, then this isn't necessary. 2 - Suspend xenbus and other devices 3 - Stop_machine, to make sure all the other vcpus are quiescent. The Xen tools require the domain to run its save off vcpu0. 4 - Within the stop_machine state, it pins any unpinned pgds (under construction or destruction), performs canonicalizes various other pieces of state (mostly converting mfns to pfns), and finally 5 - Suspend the domain Restore reverses the steps used to save the domain, ending when all the frozen processes are thawed. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/Makefile | 2 +- arch/x86/xen/enlighten.c | 6 +- arch/x86/xen/mmu.c | 46 ++++++++++++++ arch/x86/xen/smp.c | 2 +- arch/x86/xen/suspend.c | 42 +++++++++++++ arch/x86/xen/time.c | 8 +++ arch/x86/xen/xen-ops.h | 4 ++ drivers/xen/events.c | 83 +++++++++++++++++++++++++ drivers/xen/grant-table.c | 4 +- drivers/xen/manage.c | 124 +++++++++++++++++++++++++++++++++---- include/linux/page-flags.h | 1 + include/xen/events.h | 3 + include/xen/grant_table.h | 3 + include/xen/xen-ops.h | 9 +++ 14 files changed, 317 insertions(+), 20 deletions(-) create mode 100644 arch/x86/xen/suspend.c diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile index 40b119b6b103..2ba2d1649131 100644 --- a/arch/x86/xen/Makefile +++ b/arch/x86/xen/Makefile @@ -1,4 +1,4 @@ obj-y := enlighten.o setup.o multicalls.o mmu.o \ - time.o xen-asm.o grant-table.o + time.o xen-asm.o grant-table.o suspend.o obj-$(CONFIG_SMP) += smp.o diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index ce67dc8f36af..b94f63ac228b 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -857,7 +857,7 @@ static __init void xen_pagetable_setup_start(pgd_t *base) PFN_DOWN(__pa(xen_start_info->pt_base))); } -static __init void setup_shared_info(void) +void xen_setup_shared_info(void) { if (!xen_feature(XENFEAT_auto_translated_physmap)) { unsigned long addr = fix_to_virt(FIX_PARAVIRT_BOOTMAP); @@ -894,7 +894,7 @@ static __init void xen_pagetable_setup_done(pgd_t *base) pv_mmu_ops.release_pmd = xen_release_pmd; pv_mmu_ops.set_pte = xen_set_pte; - setup_shared_info(); + xen_setup_shared_info(); /* Actually pin the pagetable down, but we can't set PG_pinned yet because the page structures don't exist yet. */ @@ -902,7 +902,7 @@ static __init void xen_pagetable_setup_done(pgd_t *base) } /* This is called once we have the cpu_possible_map */ -void __init xen_setup_vcpu_info_placement(void) +void xen_setup_vcpu_info_placement(void) { int cpu; diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 4740cda36563..e95955968ba3 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -560,6 +560,29 @@ void xen_pgd_pin(pgd_t *pgd) xen_mc_issue(0); } +/* + * On save, we need to pin all pagetables to make sure they get their + * mfns turned into pfns. Search the list for any unpinned pgds and pin + * them (unpinned pgds are not currently in use, probably because the + * process is under construction or destruction). + */ +void xen_mm_pin_all(void) +{ + unsigned long flags; + struct page *page; + + spin_lock_irqsave(&pgd_lock, flags); + + list_for_each_entry(page, &pgd_list, lru) { + if (!PagePinned(page)) { + xen_pgd_pin((pgd_t *)page_address(page)); + SetPageSavePinned(page); + } + } + + spin_unlock_irqrestore(&pgd_lock, flags); +} + /* The init_mm pagetable is really pinned as soon as its created, but that's before we have page structures to store the bits. So do all the book-keeping now. */ @@ -617,6 +640,29 @@ static void xen_pgd_unpin(pgd_t *pgd) xen_mc_issue(0); } +/* + * On resume, undo any pinning done at save, so that the rest of the + * kernel doesn't see any unexpected pinned pagetables. + */ +void xen_mm_unpin_all(void) +{ + unsigned long flags; + struct page *page; + + spin_lock_irqsave(&pgd_lock, flags); + + list_for_each_entry(page, &pgd_list, lru) { + if (PageSavePinned(page)) { + BUG_ON(!PagePinned(page)); + printk("unpinning pinned %p\n", page_address(page)); + xen_pgd_unpin((pgd_t *)page_address(page)); + ClearPageSavePinned(page); + } + } + + spin_unlock_irqrestore(&pgd_lock, flags); +} + void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next) { spin_lock(&next->page_table_lock); diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 74ab8968c525..d2e3c20127d7 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -35,7 +35,7 @@ #include "xen-ops.h" #include "mmu.h" -static cpumask_t xen_cpu_initialized_map; +cpumask_t xen_cpu_initialized_map; static DEFINE_PER_CPU(int, resched_irq) = -1; static DEFINE_PER_CPU(int, callfunc_irq) = -1; static DEFINE_PER_CPU(int, debug_irq) = -1; diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c new file mode 100644 index 000000000000..7620a16fe535 --- /dev/null +++ b/arch/x86/xen/suspend.c @@ -0,0 +1,42 @@ +#include + +#include +#include +#include + +#include +#include + +#include "xen-ops.h" +#include "mmu.h" + +void xen_pre_suspend(void) +{ + xen_start_info->store_mfn = mfn_to_pfn(xen_start_info->store_mfn); + xen_start_info->console.domU.mfn = + mfn_to_pfn(xen_start_info->console.domU.mfn); + + BUG_ON(!irqs_disabled()); + + HYPERVISOR_shared_info = &xen_dummy_shared_info; + if (HYPERVISOR_update_va_mapping(fix_to_virt(FIX_PARAVIRT_BOOTMAP), + __pte_ma(0), 0)) + BUG(); +} + +void xen_post_suspend(int suspend_cancelled) +{ + if (suspend_cancelled) { + xen_start_info->store_mfn = + pfn_to_mfn(xen_start_info->store_mfn); + xen_start_info->console.domU.mfn = + pfn_to_mfn(xen_start_info->console.domU.mfn); + } else { +#ifdef CONFIG_SMP + xen_cpu_initialized_map = cpu_online_map; +#endif + } + + xen_setup_shared_info(); +} + diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index c39e1a5aa241..0bef256e5f2d 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -572,6 +572,14 @@ void xen_setup_cpu_clockevents(void) clockevents_register_device(&__get_cpu_var(xen_clock_events)); } +void xen_time_suspend(void) +{ +} + +void xen_time_resume(void) +{ +} + __init void xen_time_init(void) { int cpu = smp_processor_id(); diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index a1bc89a8f169..a0503acad664 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -9,6 +9,7 @@ extern const char xen_hypervisor_callback[]; extern const char xen_failsafe_callback[]; +struct trap_info; void xen_copy_trap_info(struct trap_info *traps); DECLARE_PER_CPU(unsigned long, xen_cr3); @@ -19,6 +20,7 @@ extern struct shared_info xen_dummy_shared_info; extern struct shared_info *HYPERVISOR_shared_info; void xen_setup_mfn_list_list(void); +void xen_setup_shared_info(void); char * __init xen_memory_setup(void); void __init xen_arch_setup(void); @@ -59,6 +61,8 @@ int xen_smp_call_function_single(int cpu, void (*func) (void *info), void *info, int xen_smp_call_function_mask(cpumask_t mask, void (*func)(void *), void *info, int wait); +extern cpumask_t xen_cpu_initialized_map; + /* Declare an asm function, along with symbols needed to make it inlineable */ diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 70375a690761..73d78dc9b875 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -674,6 +674,89 @@ static int retrigger_dynirq(unsigned int irq) return ret; } +static void restore_cpu_virqs(unsigned int cpu) +{ + struct evtchn_bind_virq bind_virq; + int virq, irq, evtchn; + + for (virq = 0; virq < NR_VIRQS; virq++) { + if ((irq = per_cpu(virq_to_irq, cpu)[virq]) == -1) + continue; + + BUG_ON(irq_info[irq].type != IRQT_VIRQ); + BUG_ON(irq_info[irq].index != virq); + + /* Get a new binding from Xen. */ + bind_virq.virq = virq; + bind_virq.vcpu = cpu; + if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_virq, + &bind_virq) != 0) + BUG(); + evtchn = bind_virq.port; + + /* Record the new mapping. */ + evtchn_to_irq[evtchn] = irq; + irq_info[irq] = mk_irq_info(IRQT_VIRQ, virq, evtchn); + bind_evtchn_to_cpu(evtchn, cpu); + + /* Ready for use. */ + unmask_evtchn(evtchn); + } +} + +static void restore_cpu_ipis(unsigned int cpu) +{ + struct evtchn_bind_ipi bind_ipi; + int ipi, irq, evtchn; + + for (ipi = 0; ipi < XEN_NR_IPIS; ipi++) { + if ((irq = per_cpu(ipi_to_irq, cpu)[ipi]) == -1) + continue; + + BUG_ON(irq_info[irq].type != IRQT_IPI); + BUG_ON(irq_info[irq].index != ipi); + + /* Get a new binding from Xen. */ + bind_ipi.vcpu = cpu; + if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_ipi, + &bind_ipi) != 0) + BUG(); + evtchn = bind_ipi.port; + + /* Record the new mapping. */ + evtchn_to_irq[evtchn] = irq; + irq_info[irq] = mk_irq_info(IRQT_IPI, ipi, evtchn); + bind_evtchn_to_cpu(evtchn, cpu); + + /* Ready for use. */ + unmask_evtchn(evtchn); + + } +} + +void xen_irq_resume(void) +{ + unsigned int cpu, irq, evtchn; + + init_evtchn_cpu_bindings(); + + /* New event-channel space is not 'live' yet. */ + for (evtchn = 0; evtchn < NR_EVENT_CHANNELS; evtchn++) + mask_evtchn(evtchn); + + /* No IRQ <-> event-channel mappings. */ + for (irq = 0; irq < NR_IRQS; irq++) + irq_info[irq].evtchn = 0; /* zap event-channel binding */ + + for (evtchn = 0; evtchn < NR_EVENT_CHANNELS; evtchn++) + evtchn_to_irq[evtchn] = -1; + + for_each_possible_cpu(cpu) { + restore_cpu_virqs(cpu); + restore_cpu_ipis(cpu); + } +} + static struct irq_chip xen_dynamic_chip __read_mostly = { .name = "xen-dyn", .mask = disable_dynirq, diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index 52b6b41b909d..e9e11168616a 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -471,14 +471,14 @@ static int gnttab_map(unsigned int start_idx, unsigned int end_idx) return 0; } -static int gnttab_resume(void) +int gnttab_resume(void) { if (max_nr_grant_frames() < nr_grant_frames) return -ENOSYS; return gnttab_map(0, nr_grant_frames - 1); } -static int gnttab_suspend(void) +int gnttab_suspend(void) { arch_gnttab_unmap_shared(shared, nr_grant_frames); return 0; diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index aa7af9e6abc0..ba85fa2cff33 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -5,21 +5,113 @@ #include #include #include +#include +#include #include +#include +#include +#include +#include -#define SHUTDOWN_INVALID -1 -#define SHUTDOWN_POWEROFF 0 -#define SHUTDOWN_SUSPEND 2 -/* Code 3 is SHUTDOWN_CRASH, which we don't use because the domain can only - * report a crash, not be instructed to crash! - * HALT is the same as POWEROFF, as far as we're concerned. The tools use - * the distinction when we return the reason code to them. - */ -#define SHUTDOWN_HALT 4 +#include +#include + +enum shutdown_state { + SHUTDOWN_INVALID = -1, + SHUTDOWN_POWEROFF = 0, + SHUTDOWN_SUSPEND = 2, + /* Code 3 is SHUTDOWN_CRASH, which we don't use because the domain can only + report a crash, not be instructed to crash! + HALT is the same as POWEROFF, as far as we're concerned. The tools use + the distinction when we return the reason code to them. */ + SHUTDOWN_HALT = 4, +}; /* Ignore multiple shutdown requests. */ -static int shutting_down = SHUTDOWN_INVALID; +static enum shutdown_state shutting_down = SHUTDOWN_INVALID; + +static int xen_suspend(void *data) +{ + int *cancelled = data; + + BUG_ON(!irqs_disabled()); + + load_cr3(swapper_pg_dir); + + xen_mm_pin_all(); + gnttab_suspend(); + xen_time_suspend(); + xen_pre_suspend(); + + /* + * This hypercall returns 1 if suspend was cancelled + * or the domain was merely checkpointed, and 0 if it + * is resuming in a new domain. + */ + *cancelled = HYPERVISOR_suspend(virt_to_mfn(xen_start_info)); + + xen_post_suspend(*cancelled); + xen_time_resume(); + gnttab_resume(); + xen_mm_unpin_all(); + + if (!*cancelled) { + xen_irq_resume(); + xen_console_resume(); + } + + return 0; +} + +static void do_suspend(void) +{ + int err; + int cancelled = 1; + + shutting_down = SHUTDOWN_SUSPEND; + +#ifdef CONFIG_PREEMPT + /* If the kernel is preemptible, we need to freeze all the processes + to prevent them from being in the middle of a pagetable update + during suspend. */ + err = freeze_processes(); + if (err) { + printk(KERN_ERR "xen suspend: freeze failed %d\n", err); + return; + } +#endif + + err = device_suspend(PMSG_SUSPEND); + if (err) { + printk(KERN_ERR "xen suspend: device_suspend %d\n", err); + goto out; + } + + printk("suspending xenbus...\n"); + /* XXX use normal device tree? */ + xenbus_suspend(); + + err = stop_machine_run(xen_suspend, &cancelled, 0); + if (err) { + printk(KERN_ERR "failed to start xen_suspend: %d\n", err); + goto out; + } + + if (!cancelled) + xenbus_resume(); + else + xenbus_suspend_cancel(); + + device_resume(); + + +out: +#ifdef CONFIG_PREEMPT + thaw_processes(); +#endif + shutting_down = SHUTDOWN_INVALID; +} static void shutdown_handler(struct xenbus_watch *watch, const char **vec, unsigned int len) @@ -52,11 +144,17 @@ static void shutdown_handler(struct xenbus_watch *watch, } if (strcmp(str, "poweroff") == 0 || - strcmp(str, "halt") == 0) + strcmp(str, "halt") == 0) { + shutting_down = SHUTDOWN_POWEROFF; orderly_poweroff(false); - else if (strcmp(str, "reboot") == 0) + } else if (strcmp(str, "reboot") == 0) { + shutting_down = SHUTDOWN_POWEROFF; /* ? */ ctrl_alt_del(); - else { +#ifdef CONFIG_PM_SLEEP + } else if (strcmp(str, "suspend") == 0) { + do_suspend(); +#endif + } else { printk(KERN_INFO "Ignoring shutdown request: %s\n", str); shutting_down = SHUTDOWN_INVALID; } diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index 590cff32415d..02955a1c3d76 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -157,6 +157,7 @@ PAGEFLAG(Active, active) __CLEARPAGEFLAG(Active, active) __PAGEFLAG(Slab, slab) PAGEFLAG(Checked, owner_priv_1) /* Used by some filesystems */ PAGEFLAG(Pinned, owner_priv_1) TESTSCFLAG(Pinned, owner_priv_1) /* Xen */ +PAGEFLAG(SavePinned, dirty); /* Xen */ PAGEFLAG(Reserved, reserved) __CLEARPAGEFLAG(Reserved, reserved) PAGEFLAG(Private, private) __CLEARPAGEFLAG(Private, private) __SETPAGEFLAG(Private, private) diff --git a/include/xen/events.h b/include/xen/events.h index a82ec0c45c38..67c4436554a9 100644 --- a/include/xen/events.h +++ b/include/xen/events.h @@ -41,4 +41,7 @@ static inline void notify_remote_via_evtchn(int port) } extern void notify_remote_via_irq(int irq); + +extern void xen_irq_resume(void); + #endif /* _XEN_EVENTS_H */ diff --git a/include/xen/grant_table.h b/include/xen/grant_table.h index 466204846121..a40f1cd91be1 100644 --- a/include/xen/grant_table.h +++ b/include/xen/grant_table.h @@ -51,6 +51,9 @@ struct gnttab_free_callback { u16 count; }; +int gnttab_suspend(void); +int gnttab_resume(void); + int gnttab_grant_foreign_access(domid_t domid, unsigned long frame, int readonly); diff --git a/include/xen/xen-ops.h b/include/xen/xen-ops.h index 10ddfe0142d0..5d7a6db54a8c 100644 --- a/include/xen/xen-ops.h +++ b/include/xen/xen-ops.h @@ -5,4 +5,13 @@ DECLARE_PER_CPU(struct vcpu_info *, xen_vcpu); +void xen_pre_suspend(void); +void xen_post_suspend(int suspend_cancelled); + +void xen_mm_pin_all(void); +void xen_mm_unpin_all(void); + +void xen_time_suspend(void); +void xen_time_resume(void); + #endif /* INCLUDE_XEN_OPS_H */ From 359cdd3f866b6219a6729e313faf2221397f3278 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:28 +0100 Subject: [PATCH 196/821] xen: maintain clock offset over save/restore Hook into the device model to make sure that timekeeping's resume handler is called. This deals with our clocksource's non-monotonicity over the save/restore. Explicitly call clock_has_changed() to make sure that all the timers get retriggered properly. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/time.c | 8 -------- drivers/xen/manage.c | 15 ++++++++++++--- include/xen/xen-ops.h | 3 --- 3 files changed, 12 insertions(+), 14 deletions(-) diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index 0bef256e5f2d..c39e1a5aa241 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -572,14 +572,6 @@ void xen_setup_cpu_clockevents(void) clockevents_register_device(&__get_cpu_var(xen_clock_events)); } -void xen_time_suspend(void) -{ -} - -void xen_time_resume(void) -{ -} - __init void xen_time_init(void) { int cpu = smp_processor_id(); diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index ba85fa2cff33..675c3dd23962 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -34,14 +34,21 @@ static enum shutdown_state shutting_down = SHUTDOWN_INVALID; static int xen_suspend(void *data) { int *cancelled = data; + int err; BUG_ON(!irqs_disabled()); load_cr3(swapper_pg_dir); + err = device_power_down(PMSG_SUSPEND); + if (err) { + printk(KERN_ERR "xen_suspend: device_power_down failed: %d\n", + err); + return err; + } + xen_mm_pin_all(); gnttab_suspend(); - xen_time_suspend(); xen_pre_suspend(); /* @@ -52,10 +59,11 @@ static int xen_suspend(void *data) *cancelled = HYPERVISOR_suspend(virt_to_mfn(xen_start_info)); xen_post_suspend(*cancelled); - xen_time_resume(); gnttab_resume(); xen_mm_unpin_all(); + device_power_up(); + if (!*cancelled) { xen_irq_resume(); xen_console_resume(); @@ -105,7 +113,8 @@ static void do_suspend(void) device_resume(); - + /* Make sure timer events get retriggered on all CPUs */ + clock_was_set(); out: #ifdef CONFIG_PREEMPT thaw_processes(); diff --git a/include/xen/xen-ops.h b/include/xen/xen-ops.h index 5d7a6db54a8c..a706d6a78960 100644 --- a/include/xen/xen-ops.h +++ b/include/xen/xen-ops.h @@ -11,7 +11,4 @@ void xen_post_suspend(int suspend_cancelled); void xen_mm_pin_all(void); void xen_mm_unpin_all(void); -void xen_time_suspend(void); -void xen_time_resume(void); - #endif /* INCLUDE_XEN_OPS_H */ From 3945e2c9abf8e00c2edc4aa29215ddfad1cd8cf7 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 25 May 2008 10:00:09 -0700 Subject: [PATCH 197/821] x86: extend e820 ealy_res support 32bit - fix #2 remove extra -1 in reseve_early calling panic if can not find space for new RAMDISK Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/kernel/setup_32.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index c04e8c91daf7..08b47a2f7af0 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -479,7 +479,7 @@ static void __init reserve_initrd(void) initrd_start = 0; if (ramdisk_size >= end_of_lowmem/2) { - free_early(ramdisk_image, ramdisk_image + ramdisk_size - 1); + free_early(ramdisk_image, ramdisk_end); printk(KERN_ERR "initrd too large to handle, " "disabling initrd\n"); return; @@ -501,9 +501,13 @@ static void __init reserve_initrd(void) end_of_lowmem, ramdisk_size, PAGE_SIZE); + if (ramdisk_here == -1ULL) + panic("Cannot find place for new RAMDISK of size %lld\n", + ramdisk_size); + /* Note: this includes all the lowmem currently occupied by the initrd, we rely on that fact to keep the data intact. */ - reserve_early(ramdisk_here, ramdisk_here + ramdisk_size - 1, + reserve_early(ramdisk_here, ramdisk_here + ramdisk_size, "NEW RAMDISK"); initrd_start = ramdisk_here + PAGE_OFFSET; initrd_end = initrd_start + ramdisk_size; @@ -579,15 +583,15 @@ void __init setup_bootmem_allocator(void) PAGE_SIZE); if (bootmap == -1L) panic("Cannot find bootmem map of size %ld\n", bootmap_size); - reserve_early(bootmap, bootmap + bootmap_size - 1, "BOOTMAP"); + reserve_early(bootmap, bootmap + bootmap_size, "BOOTMAP"); #ifdef CONFIG_BLK_DEV_INITRD reserve_initrd(); #endif bootmap_size = init_bootmem(bootmap >> PAGE_SHIFT, max_low_pfn); printk(KERN_INFO " low ram: %08lx - %08lx\n", min_low_pfn< Date: Tue, 27 May 2008 18:03:56 +0200 Subject: [PATCH 198/821] x86: aperture_64.c: cleanups Some small cleanups for aperture_64.c; they should not really change any code. Signed-off-by: Pavel Machek Cc: Dave Jones Cc: Andi Kleen Signed-off-by: Thomas Gleixner --- arch/x86/kernel/aperture_64.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 5373f7834d8a..6eea42eb287b 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -111,7 +111,7 @@ static u32 __init allocate_aperture(void) /* Find a PCI capability */ -static __u32 __init find_cap(int bus, int slot, int func, int cap) +static u32 __init find_cap(int bus, int slot, int func, int cap) { int bytes; u8 pos; @@ -137,7 +137,7 @@ static __u32 __init find_cap(int bus, int slot, int func, int cap) } /* Read a standard AGPv3 bridge header */ -static __u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order) +static u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order) { u32 apsize; u32 apsizereg; @@ -202,7 +202,7 @@ static __u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order) * the AGP bridges should be always an own bus on the HT hierarchy, * but do it here for future safety. */ -static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) +static u32 __init search_agp_bridge(u32 *order, int *valid_agp) { int bus, slot, func; From b20aeccd6ad42ccb6be1b3d1d32618ddd2b31bf0 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 28 May 2008 14:24:38 +0200 Subject: [PATCH 199/821] xen: fix early bootup crash on native hardware -tip tree auto-testing found the following early bootup hang: --------------> get_memcfg_from_srat: assigning address to rsdp RSD PTR v0 [Nvidia] BUG: Int 14: CR2 ffd00040 EDI 8092fbfe ESI ffd00040 EBP 80b0aee8 ESP 80b0aed0 EBX 000f76f0 EDX 0000000e ECX 00000003 EAX ffd00040 err 00000000 EIP 802c055a CS 00000060 flg 00010006 Stack: ffd00040 80bc78d0 80b0af6c 80b1dbfe 8093d8ba 00000008 80b42810 80b4ddb4 80b42842 00000000 80b0af1c 801079c8 808e724e 00000000 80b42871 802c0531 00000100 00000000 0003fff0 80b0af40 80129999 00040100 00040100 00000000 Pid: 0, comm: swapper Not tainted 2.6.26-rc4-sched-devel.git #570 [<802c055a>] ? strncmp+0x11/0x25 [<80b1dbfe>] ? get_memcfg_from_srat+0xb4/0x568 [<801079c8>] ? mcount_call+0x5/0x9 [<802c0531>] ? strcmp+0xa/0x22 [<80129999>] ? printk+0x38/0x3a [<80129999>] ? printk+0x38/0x3a [<8011b122>] ? memory_present+0x66/0x6f [<80b216b4>] ? setup_memory+0x13/0x40c [<80b16b47>] ? propagate_e820_map+0x80/0x97 [<80b1622a>] ? setup_arch+0x248/0x477 [<80129999>] ? printk+0x38/0x3a [<80b11759>] ? start_kernel+0x6e/0x2eb [<80b110fc>] ? i386_start_kernel+0xeb/0xf2 ======================= <------ with this config: http://redhat.com/~mingo/misc/config-Wed_May_28_01_33_33_CEST_2008.bad The thing is, the crash makes little sense at first sight. We crash on a benign-looking printk. The code around it got changed in -tip but checking those topic branches individually did not reproduce the bug. Bisection led to this commit: | d5edbc1f75420935b1ec7e65df10c8f81cea82de is first bad commit | commit d5edbc1f75420935b1ec7e65df10c8f81cea82de | Author: Jeremy Fitzhardinge | Date: Mon May 26 23:31:22 2008 +0100 | | xen: add p2m mfn_list_list Which is somewhat surprising, as on native hardware Xen client side should have little to no side-effects. After some head scratching, it turns out the following happened: randconfig enabled the following Xen options: CONFIG_XEN=y CONFIG_XEN_MAX_DOMAIN_MEMORY=8 # CONFIG_XEN_BLKDEV_FRONTEND is not set # CONFIG_XEN_NETDEV_FRONTEND is not set CONFIG_HVC_XEN=y # CONFIG_XEN_BALLOON is not set which activated this piece of code in arch/x86/xen/mmu.c: > @@ -69,6 +69,13 @@ > __attribute__((section(".data.page_aligned"))) = > { [ 0 ... TOP_ENTRIES - 1] = &p2m_missing[0] }; > > +/* Arrays of p2m arrays expressed in mfns used for save/restore */ > +static unsigned long p2m_top_mfn[TOP_ENTRIES] > + __attribute__((section(".bss.page_aligned"))); > + > +static unsigned long p2m_top_mfn_list[TOP_ENTRIES / P2M_ENTRIES_PER_PAGE] > + __attribute__((section(".bss.page_aligned"))); The problem is, you must only put variables into .bss.page_aligned that have a _size_ that is _exactly_ page aligned. In this case the size of p2m_top_mfn_list is not page aligned: 80b8d000 b p2m_top_mfn 80b8f000 b p2m_top_mfn_list 80b8f008 b softirq_stack 80b97008 b hardirq_stack 80b9f008 b bm_pte So all subsequent variables get unaligned which, depending on luck, breaks the kernel in various funny ways. In this case what killed the kernel first was the misaligned bootmap pte page, resulting in that creative crash above. Anyway, this was a fun bug to track down :-) I think the moral is that .bss.page_aligned is a dangerous construct in its current form, and the symptoms of breakage are very non-trivial, so i think we need build-time checks to make sure all symbols in .bss.page_aligned are truly page aligned. The Xen fix below gets the kernel booting again. Signed-off-by: Ingo Molnar --- arch/x86/xen/mmu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index e95955968ba3..eef3b5c6e2fe 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -73,7 +73,8 @@ static unsigned long *p2m_top[TOP_ENTRIES] static unsigned long p2m_top_mfn[TOP_ENTRIES] __attribute__((section(".bss.page_aligned"))); -static unsigned long p2m_top_mfn_list[TOP_ENTRIES / P2M_ENTRIES_PER_PAGE] +static unsigned long p2m_top_mfn_list[ + PAGE_ALIGN(TOP_ENTRIES / P2M_ENTRIES_PER_PAGE)] __attribute__((section(".bss.page_aligned"))); static inline unsigned p2m_top_index(unsigned long pfn) From c7d624d1ee7b77622305bd638755394e4d3f2d2f Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Wed, 28 May 2008 12:57:13 -0400 Subject: [PATCH 200/821] x86: Fix up silly i1586 boot message. Trying to boot a 64-bit kernel on a 32bit Pentium 4 gets you an amusing message along the lines of. "you need an x86-64, but you only have an i1586" due to the P4 being family F. Munge it to be 686. Signed-off-by: Dave Jones Signed-off-by: H. Peter Anvin --- arch/x86/boot/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/boot/cpu.c b/arch/x86/boot/cpu.c index 00e19edd852c..92d6fd73dc7d 100644 --- a/arch/x86/boot/cpu.c +++ b/arch/x86/boot/cpu.c @@ -28,6 +28,8 @@ static char *cpu_name(int level) if (level == 64) { return "x86-64"; } else { + if (level == 15) + level = 6; sprintf(buf, "i%d86", level); return buf; } From 19ec673ced067316b9732bc6d1c4ff4052e5f795 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Wed, 28 May 2008 23:00:47 +0400 Subject: [PATCH 201/821] x86: nmi - fix incorrect NMI watchdog used by default The commit commit 4b82b277707a39b97271439c475f186f63ec4692 Author: Cyrill Gorcunov Date: Sat May 24 19:36:35 2008 +0400 set nmi_watchdog to NMI_IO_APIC as by default. This causes hangs on some machines with buggy watchdogs. Fix it - i.e. restore old behaviour. Thanks to Sitsofe Wheeler and Adrian Bunk for catching the problem and Maciej W. Rozycki for explanation what is going on there. Signed-off-by: Cyrill Gorcunov CC: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- arch/x86/kernel/nmi.c | 16 +++++++++------- include/asm-x86/nmi.h | 4 +++- 2 files changed, 12 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c index 69a839fc1eb0..3671a9f3564b 100644 --- a/arch/x86/kernel/nmi.c +++ b/arch/x86/kernel/nmi.c @@ -84,20 +84,15 @@ static inline unsigned int get_timer_irqs(int cpu) #endif } +#ifdef CONFIG_X86_64 /* Run after command line and cpu_init init, but before all other checks */ void nmi_watchdog_default(void) { if (nmi_watchdog != NMI_DEFAULT) return; -#ifdef CONFIG_X86_64 nmi_watchdog = NMI_NONE; -#else - if (lapic_watchdog_ok()) - nmi_watchdog = NMI_LOCAL_APIC; - else - nmi_watchdog = NMI_IO_APIC; -#endif } +#endif #ifdef CONFIG_SMP /* @@ -488,8 +483,15 @@ int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, return -EIO; } +#ifdef CONFIG_X86_64 /* if nmi_watchdog is not set yet, then set it */ nmi_watchdog_default(); +#else + if (lapic_watchdog_ok()) + nmi_watchdog = NMI_LOCAL_APIC; + else + nmi_watchdog = NMI_IO_APIC; +#endif if (nmi_watchdog == NMI_LOCAL_APIC) { if (nmi_watchdog_enabled) diff --git a/include/asm-x86/nmi.h b/include/asm-x86/nmi.h index 1e8f34d7ab68..6f4d44fc051f 100644 --- a/include/asm-x86/nmi.h +++ b/include/asm-x86/nmi.h @@ -38,9 +38,11 @@ static inline void unset_nmi_pm_callback(struct pm_dev *dev) #ifdef CONFIG_X86_64 extern void default_do_nmi(struct pt_regs *); +extern void nmi_watchdog_default(void); +#else +#define nmi_watchdog_default(void) do {} while (0) #endif -extern void nmi_watchdog_default(void); extern void die_nmi(char *str, struct pt_regs *regs, int do_panic); extern int check_nmi_watchdog(void); extern int nmi_watchdog_enabled; From 0261ac5f2f43a1906cfacfb19d62ed643d162cbe Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 29 May 2008 09:31:50 +0200 Subject: [PATCH 202/821] xen: fix "xen: implement save/restore" -tip testing found the following build breakage: drivers/built-in.o: In function `xen_suspend': manage.c:(.text+0x4390f): undefined reference to `xen_console_resume' with this config: http://redhat.com/~mingo/misc/config-Thu_May_29_09_23_16_CEST_2008.bad i have bisected it down to: | commit 0e91398f2a5d4eb6b07df8115917d0d1cf3e9b58 | Author: Jeremy Fitzhardinge | Date: Mon May 26 23:31:27 2008 +0100 | | xen: implement save/restore the problem is that drivers/xen/manage.c is built unconditionally if CONFIG_XEN is enabled and makes use of xen_suspend(), but drivers/char/hvc_xen.c, where the xen_suspend() method is implemented, is only build if CONFIG_HVC_XEN=y as well. i have solved this by providing a NOP implementation for xen_suspend() in the !CONFIG_HVC_XEN case. Signed-off-by: Ingo Molnar --- include/xen/hvc-console.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/xen/hvc-console.h b/include/xen/hvc-console.h index fd5483a059bb..98b79bc404dd 100644 --- a/include/xen/hvc-console.h +++ b/include/xen/hvc-console.h @@ -3,7 +3,11 @@ extern struct console xenboot_console; +#ifdef CONFIG_HVC_XEN void xen_console_resume(void); +#else +static inline void xen_console_resume(void) { } +#endif void xen_raw_console_write(const char *str); void xen_raw_printk(const char *fmt, ...); From ba3a5974239293d921235e6fa82b09b670e674ef Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 30 May 2008 14:55:47 +0200 Subject: [PATCH 203/821] - fix typo in include/asm-x86/nmi.h --- include/asm-x86/nmi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-x86/nmi.h b/include/asm-x86/nmi.h index 6f4d44fc051f..972a4f6f799a 100644 --- a/include/asm-x86/nmi.h +++ b/include/asm-x86/nmi.h @@ -40,7 +40,7 @@ static inline void unset_nmi_pm_callback(struct pm_dev *dev) extern void default_do_nmi(struct pt_regs *); extern void nmi_watchdog_default(void); #else -#define nmi_watchdog_default(void) do {} while (0) +#define nmi_watchdog_default() do { } while (0) #endif extern void die_nmi(char *str, struct pt_regs *regs, int do_panic); From d364319b989967b74e57fef5c8017fd56a16c392 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 May 2008 23:42:01 +0200 Subject: [PATCH 204/821] x86: move mmconfig declarations to header arch/x86/kernel/mmconf-fam10h_64.c is missing the prototypes, which are decalred in arch/x86/kernel/setup_64.c. Move the prototypes and the inline stubs to the appropriate header file. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/mmconf-fam10h_64.c | 1 + arch/x86/kernel/setup_64.c | 13 +------------ include/asm-x86/mmconfig.h | 12 ++++++++++++ 3 files changed, 14 insertions(+), 12 deletions(-) create mode 100644 include/asm-x86/mmconfig.h diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c index edc5fbfe85c0..fdfdc550b366 100644 --- a/arch/x86/kernel/mmconf-fam10h_64.c +++ b/arch/x86/kernel/mmconf-fam10h_64.c @@ -12,6 +12,7 @@ #include #include #include +#include #include "../pci/pci.h" diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 6dff1286ad8a..341230db74e1 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -71,6 +71,7 @@ #include #include #include +#include #include #ifdef CONFIG_PARAVIRT @@ -293,18 +294,6 @@ static void __init parse_setup_data(void) } } -#ifdef CONFIG_PCI_MMCONFIG -extern void __cpuinit fam10h_check_enable_mmcfg(void); -extern void __init check_enable_amd_mmconf_dmi(void); -#else -void __cpuinit fam10h_check_enable_mmcfg(void) -{ -} -void __init check_enable_amd_mmconf_dmi(void) -{ -} -#endif - /* * setup_arch - architecture-specific boot-time initializations * diff --git a/include/asm-x86/mmconfig.h b/include/asm-x86/mmconfig.h new file mode 100644 index 000000000000..95beda07c6fa --- /dev/null +++ b/include/asm-x86/mmconfig.h @@ -0,0 +1,12 @@ +#ifndef _ASM_MMCONFIG_H +#define _ASM_MMCONFIG_H + +#ifdef CONFIG_PCI_MMCONFIG +extern void __cpuinit fam10h_check_enable_mmcfg(void); +extern void __init check_enable_amd_mmconf_dmi(void); +#else +static inline void fam10h_check_enable_mmcfg(void) { } +static inline void check_enable_amd_mmconf_dmi(void) { } +#endif + +#endif From 4d285878564bb46cf64e54be18eeffe33ca583a0 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 22 May 2008 18:48:32 -0400 Subject: [PATCH 205/821] x86: Move the AMD64 specific parts out of setup_64.c Create a separate amd_64.c file in the cpu/ dir for the useful parts to live in. Signed-off-by: Dave Jones Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/Makefile | 1 + arch/x86/kernel/cpu/amd_64.c | 235 +++++++++++++++++++++++++++++++++++ arch/x86/kernel/setup_64.c | 232 +--------------------------------- 3 files changed, 242 insertions(+), 226 deletions(-) create mode 100644 arch/x86/kernel/cpu/amd_64.c diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index a0c6f8190887..ef065c1a2e1a 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -7,6 +7,7 @@ obj-y += proc.o feature_names.o obj-$(CONFIG_X86_32) += common.o bugs.o obj-$(CONFIG_X86_32) += amd.o +obj-$(CONFIG_X86_64) += amd_64.o obj-$(CONFIG_X86_32) += cyrix.o obj-$(CONFIG_X86_32) += centaur.o obj-$(CONFIG_X86_32) += transmeta.o diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c new file mode 100644 index 000000000000..1746f6f95726 --- /dev/null +++ b/arch/x86/kernel/cpu/amd_64.c @@ -0,0 +1,235 @@ +#include +#include + +#include +#include +#include + +#include + +extern int __cpuinit get_model_name(struct cpuinfo_x86 *c); +extern void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c); + +int force_mwait __cpuinitdata; + +#ifdef CONFIG_NUMA +static int __cpuinit nearby_node(int apicid) +{ + int i, node; + + for (i = apicid - 1; i >= 0; i--) { + node = apicid_to_node[i]; + if (node != NUMA_NO_NODE && node_online(node)) + return node; + } + for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { + node = apicid_to_node[i]; + if (node != NUMA_NO_NODE && node_online(node)) + return node; + } + return first_node(node_online_map); /* Shouldn't happen */ +} +#endif + +/* + * On a AMD dual core setup the lower bits of the APIC id distingush the cores. + * Assumes number of cores is a power of two. + */ +static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_SMP + unsigned bits; +#ifdef CONFIG_NUMA + int cpu = smp_processor_id(); + int node = 0; + unsigned apicid = hard_smp_processor_id(); +#endif + bits = c->x86_coreid_bits; + + /* Low order bits define the core id (index of core in socket) */ + c->cpu_core_id = c->initial_apicid & ((1 << bits)-1); + /* Convert the initial APIC ID into the socket ID */ + c->phys_proc_id = c->initial_apicid >> bits; + +#ifdef CONFIG_NUMA + node = c->phys_proc_id; + if (apicid_to_node[apicid] != NUMA_NO_NODE) + node = apicid_to_node[apicid]; + if (!node_online(node)) { + /* Two possibilities here: + - The CPU is missing memory and no node was created. + In that case try picking one from a nearby CPU + - The APIC IDs differ from the HyperTransport node IDs + which the K8 northbridge parsing fills in. + Assume they are all increased by a constant offset, + but in the same order as the HT nodeids. + If that doesn't result in a usable node fall back to the + path for the previous case. */ + + int ht_nodeid = c->initial_apicid; + + if (ht_nodeid >= 0 && + apicid_to_node[ht_nodeid] != NUMA_NO_NODE) + node = apicid_to_node[ht_nodeid]; + /* Pick a nearby node */ + if (!node_online(node)) + node = nearby_node(apicid); + } + numa_set_node(cpu, node); + + printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); +#endif +#endif +} + +static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_SMP + unsigned bits, ecx; + + /* Multi core CPU? */ + if (c->extended_cpuid_level < 0x80000008) + return; + + ecx = cpuid_ecx(0x80000008); + + c->x86_max_cores = (ecx & 0xff) + 1; + + /* CPU telling us the core id bits shift? */ + bits = (ecx >> 12) & 0xF; + + /* Otherwise recompute */ + if (bits == 0) { + while ((1 << bits) < c->x86_max_cores) + bits++; + } + + c->x86_coreid_bits = bits; + +#endif +} + +#define ENABLE_C1E_MASK 0x18000000 +#define CPUID_PROCESSOR_SIGNATURE 1 +#define CPUID_XFAM 0x0ff00000 +#define CPUID_XFAM_K8 0x00000000 +#define CPUID_XFAM_10H 0x00100000 +#define CPUID_XFAM_11H 0x00200000 +#define CPUID_XMOD 0x000f0000 +#define CPUID_XMOD_REV_F 0x00040000 + +/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */ +static __cpuinit int amd_apic_timer_broken(void) +{ + u32 lo, hi, eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); + + switch (eax & CPUID_XFAM) { + case CPUID_XFAM_K8: + if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F) + break; + case CPUID_XFAM_10H: + case CPUID_XFAM_11H: + rdmsr(MSR_K8_ENABLE_C1E, lo, hi); + if (lo & ENABLE_C1E_MASK) + return 1; + break; + default: + /* err on the side of caution */ + return 1; + } + return 0; +} + +void __cpuinit early_init_amd(struct cpuinfo_x86 *c) +{ + early_init_amd_mc(c); + + /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */ + if (c->x86_power & (1<<8)) + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); +} + +void __cpuinit init_amd(struct cpuinfo_x86 *c) +{ + unsigned level; + +#ifdef CONFIG_SMP + unsigned long value; + + /* + * Disable TLB flush filter by setting HWCR.FFDIS on K8 + * bit 6 of msr C001_0015 + * + * Errata 63 for SH-B3 steppings + * Errata 122 for all steppings (F+ have it disabled by default) + */ + if (c->x86 == 15) { + rdmsrl(MSR_K8_HWCR, value); + value |= 1 << 6; + wrmsrl(MSR_K8_HWCR, value); + } +#endif + + /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; + 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ + clear_cpu_cap(c, 0*32+31); + + /* On C+ stepping K8 rep microcode works well for copy/memset */ + level = cpuid_eax(1); + if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) || + level >= 0x0f58)) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + if (c->x86 == 0x10 || c->x86 == 0x11) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + + /* Enable workaround for FXSAVE leak */ + if (c->x86 >= 6) + set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK); + + level = get_model_name(c); + if (!level) { + switch (c->x86) { + case 15: + /* Should distinguish Models here, but this is only + a fallback anyways. */ + strcpy(c->x86_model_id, "Hammer"); + break; + } + } + display_cacheinfo(c); + + /* Multi core CPU? */ + if (c->extended_cpuid_level >= 0x80000008) + amd_detect_cmp(c); + + if (c->extended_cpuid_level >= 0x80000006 && + (cpuid_edx(0x80000006) & 0xf000)) + num_cache_leaves = 4; + else + num_cache_leaves = 3; + + if (c->x86 == 0xf || c->x86 == 0x10 || c->x86 == 0x11) + set_cpu_cap(c, X86_FEATURE_K8); + + /* MFENCE stops RDTSC speculation */ + set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); + + if (c->x86 == 0x10) + fam10h_check_enable_mmcfg(); + + if (amd_apic_timer_broken()) + disable_apic_timer = 1; + + if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) { + unsigned long long tseg; + + /* + * Split up direct mapping around the TSEG SMM area. + * Don't do it for gbpages because there seems very little + * benefit in doing so. + */ + if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg) && + (tseg >> PMD_SHIFT) < (max_pfn_mapped >> (PMD_SHIFT-PAGE_SHIFT))) + set_memory_4k((unsigned long)__va(tseg), 1); + } +} diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 341230db74e1..b07b1997ed97 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -96,8 +96,6 @@ int bootloader_type; unsigned long saved_video_mode; -int force_mwait __cpuinitdata; - /* * Early DMI memory */ @@ -526,7 +524,7 @@ void __init setup_arch(char **cmdline_p) check_enable_amd_mmconf_dmi(); } -static int __cpuinit get_model_name(struct cpuinfo_x86 *c) +int __cpuinit get_model_name(struct cpuinfo_x86 *c) { unsigned int *v; @@ -542,7 +540,7 @@ static int __cpuinit get_model_name(struct cpuinfo_x86 *c) } -static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) +void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) { unsigned int n, dummy, eax, ebx, ecx, edx; @@ -574,228 +572,6 @@ static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) } } -#ifdef CONFIG_NUMA -static int __cpuinit nearby_node(int apicid) -{ - int i, node; - - for (i = apicid - 1; i >= 0; i--) { - node = apicid_to_node[i]; - if (node != NUMA_NO_NODE && node_online(node)) - return node; - } - for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { - node = apicid_to_node[i]; - if (node != NUMA_NO_NODE && node_online(node)) - return node; - } - return first_node(node_online_map); /* Shouldn't happen */ -} -#endif - -/* - * On a AMD dual core setup the lower bits of the APIC id distingush the cores. - * Assumes number of cores is a power of two. - */ -static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - unsigned bits; -#ifdef CONFIG_NUMA - int cpu = smp_processor_id(); - int node = 0; - unsigned apicid = hard_smp_processor_id(); -#endif - bits = c->x86_coreid_bits; - - /* Low order bits define the core id (index of core in socket) */ - c->cpu_core_id = c->initial_apicid & ((1 << bits)-1); - /* Convert the initial APIC ID into the socket ID */ - c->phys_proc_id = c->initial_apicid >> bits; - -#ifdef CONFIG_NUMA - node = c->phys_proc_id; - if (apicid_to_node[apicid] != NUMA_NO_NODE) - node = apicid_to_node[apicid]; - if (!node_online(node)) { - /* Two possibilities here: - - The CPU is missing memory and no node was created. - In that case try picking one from a nearby CPU - - The APIC IDs differ from the HyperTransport node IDs - which the K8 northbridge parsing fills in. - Assume they are all increased by a constant offset, - but in the same order as the HT nodeids. - If that doesn't result in a usable node fall back to the - path for the previous case. */ - - int ht_nodeid = c->initial_apicid; - - if (ht_nodeid >= 0 && - apicid_to_node[ht_nodeid] != NUMA_NO_NODE) - node = apicid_to_node[ht_nodeid]; - /* Pick a nearby node */ - if (!node_online(node)) - node = nearby_node(apicid); - } - numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); -#endif -#endif -} - -static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - unsigned bits, ecx; - - /* Multi core CPU? */ - if (c->extended_cpuid_level < 0x80000008) - return; - - ecx = cpuid_ecx(0x80000008); - - c->x86_max_cores = (ecx & 0xff) + 1; - - /* CPU telling us the core id bits shift? */ - bits = (ecx >> 12) & 0xF; - - /* Otherwise recompute */ - if (bits == 0) { - while ((1 << bits) < c->x86_max_cores) - bits++; - } - - c->x86_coreid_bits = bits; - -#endif -} - -#define ENABLE_C1E_MASK 0x18000000 -#define CPUID_PROCESSOR_SIGNATURE 1 -#define CPUID_XFAM 0x0ff00000 -#define CPUID_XFAM_K8 0x00000000 -#define CPUID_XFAM_10H 0x00100000 -#define CPUID_XFAM_11H 0x00200000 -#define CPUID_XMOD 0x000f0000 -#define CPUID_XMOD_REV_F 0x00040000 - -/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */ -static __cpuinit int amd_apic_timer_broken(void) -{ - u32 lo, hi, eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); - - switch (eax & CPUID_XFAM) { - case CPUID_XFAM_K8: - if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F) - break; - case CPUID_XFAM_10H: - case CPUID_XFAM_11H: - rdmsr(MSR_K8_ENABLE_C1E, lo, hi); - if (lo & ENABLE_C1E_MASK) - return 1; - break; - default: - /* err on the side of caution */ - return 1; - } - return 0; -} - -static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) -{ - early_init_amd_mc(c); - - /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */ - if (c->x86_power & (1<<8)) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); -} - -static void __cpuinit init_amd(struct cpuinfo_x86 *c) -{ - unsigned level; - -#ifdef CONFIG_SMP - unsigned long value; - - /* - * Disable TLB flush filter by setting HWCR.FFDIS on K8 - * bit 6 of msr C001_0015 - * - * Errata 63 for SH-B3 steppings - * Errata 122 for all steppings (F+ have it disabled by default) - */ - if (c->x86 == 15) { - rdmsrl(MSR_K8_HWCR, value); - value |= 1 << 6; - wrmsrl(MSR_K8_HWCR, value); - } -#endif - - /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; - 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ - clear_cpu_cap(c, 0*32+31); - - /* On C+ stepping K8 rep microcode works well for copy/memset */ - level = cpuid_eax(1); - if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) || - level >= 0x0f58)) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - if (c->x86 == 0x10 || c->x86 == 0x11) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - - /* Enable workaround for FXSAVE leak */ - if (c->x86 >= 6) - set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK); - - level = get_model_name(c); - if (!level) { - switch (c->x86) { - case 15: - /* Should distinguish Models here, but this is only - a fallback anyways. */ - strcpy(c->x86_model_id, "Hammer"); - break; - } - } - display_cacheinfo(c); - - /* Multi core CPU? */ - if (c->extended_cpuid_level >= 0x80000008) - amd_detect_cmp(c); - - if (c->extended_cpuid_level >= 0x80000006 && - (cpuid_edx(0x80000006) & 0xf000)) - num_cache_leaves = 4; - else - num_cache_leaves = 3; - - if (c->x86 == 0xf || c->x86 == 0x10 || c->x86 == 0x11) - set_cpu_cap(c, X86_FEATURE_K8); - - /* MFENCE stops RDTSC speculation */ - set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); - - if (c->x86 == 0x10) - fam10h_check_enable_mmcfg(); - - if (amd_apic_timer_broken()) - disable_apic_timer = 1; - - if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) { - unsigned long long tseg; - - /* - * Split up direct mapping around the TSEG SMM area. - * Don't do it for gbpages because there seems very little - * benefit in doing so. - */ - if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg) && - (tseg >> PMD_SHIFT) < (max_pfn_mapped >> (PMD_SHIFT-PAGE_SHIFT))) - set_memory_4k((unsigned long)__va(tseg), 1); - } -} - void __cpuinit detect_ht(struct cpuinfo_x86 *c) { #ifdef CONFIG_SMP @@ -977,6 +753,10 @@ static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) c->x86_vendor = X86_VENDOR_UNKNOWN; } +// FIXME: Needs to use cpu_vendor_dev_register +extern void __cpuinit early_init_amd(struct cpuinfo_x86 *c); +extern void __cpuinit init_amd(struct cpuinfo_x86 *c); + /* Do some early cpuid on the boot CPU to get some parameter that are needed before check_bugs. Everything advanced is in identify_cpu below. */ From a82fbe31cb387bb246e2d3b3c177f551bb991135 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 22 May 2008 18:54:32 -0400 Subject: [PATCH 206/821] x86: Move the 64-bit Intel specific parts out of setup_64.c Create a separate intel_64.c file in the cpu/ dir for the useful parts to live in. Signed-off-by: Dave Jones Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/Makefile | 1 + arch/x86/kernel/cpu/intel_64.c | 97 ++++++++++++++++++++++++++++++++++ arch/x86/kernel/setup_64.c | 93 +------------------------------- 3 files changed, 100 insertions(+), 91 deletions(-) create mode 100644 arch/x86/kernel/cpu/intel_64.c diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index ef065c1a2e1a..b7a11924fed7 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_X86_32) += cyrix.o obj-$(CONFIG_X86_32) += centaur.o obj-$(CONFIG_X86_32) += transmeta.o obj-$(CONFIG_X86_32) += intel.o +obj-$(CONFIG_X86_64) += intel_64.o obj-$(CONFIG_X86_32) += umc.o obj-$(CONFIG_X86_MCE) += mcheck/ diff --git a/arch/x86/kernel/cpu/intel_64.c b/arch/x86/kernel/cpu/intel_64.c new file mode 100644 index 000000000000..e5f929f6c3d4 --- /dev/null +++ b/arch/x86/kernel/cpu/intel_64.c @@ -0,0 +1,97 @@ +#include +#include +#include +#include +#include +#include + +void __cpuinit early_init_intel(struct cpuinfo_x86 *c) +{ + if ((c->x86 == 0xf && c->x86_model >= 0x03) || + (c->x86 == 0x6 && c->x86_model >= 0x0e)) + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); +} + +/* + * find out the number of processor cores on the die + */ +static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) +{ + unsigned int eax, t; + + if (c->cpuid_level < 4) + return 1; + + cpuid_count(4, 0, &eax, &t, &t, &t); + + if (eax & 0x1f) + return ((eax >> 26) + 1); + else + return 1; +} + +static void __cpuinit srat_detect_node(void) +{ +#ifdef CONFIG_NUMA + unsigned node; + int cpu = smp_processor_id(); + int apicid = hard_smp_processor_id(); + + /* Don't do the funky fallback heuristics the AMD version employs + for now. */ + node = apicid_to_node[apicid]; + if (node == NUMA_NO_NODE || !node_online(node)) + node = first_node(node_online_map); + numa_set_node(cpu, node); + + printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); +#endif +} + +void __cpuinit init_intel(struct cpuinfo_x86 *c) +{ + /* Cache sizes */ + unsigned n; + + init_intel_cacheinfo(c); + if (c->cpuid_level > 9) { + unsigned eax = cpuid_eax(10); + /* Check for version and the number of counters */ + if ((eax & 0xff) && (((eax>>8) & 0xff) > 1)) + set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON); + } + + if (cpu_has_ds) { + unsigned int l1, l2; + rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); + if (!(l1 & (1<<11))) + set_cpu_cap(c, X86_FEATURE_BTS); + if (!(l1 & (1<<12))) + set_cpu_cap(c, X86_FEATURE_PEBS); + } + + + if (cpu_has_bts) + ds_init_intel(c); + + n = c->extended_cpuid_level; + if (n >= 0x80000008) { + unsigned eax = cpuid_eax(0x80000008); + c->x86_virt_bits = (eax >> 8) & 0xff; + c->x86_phys_bits = eax & 0xff; + /* CPUID workaround for Intel 0F34 CPU */ + if (c->x86_vendor == X86_VENDOR_INTEL && + c->x86 == 0xF && c->x86_model == 0x3 && + c->x86_mask == 0x4) + c->x86_phys_bits = 36; + } + + if (c->x86 == 15) + c->x86_cache_alignment = c->x86_clflush_size * 2; + if (c->x86 == 6) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); + c->x86_max_cores = intel_num_cpu_cores(c); + + srat_detect_node(); +} diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index b07b1997ed97..c4e6a0b6c303 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -622,97 +622,6 @@ out: #endif } -/* - * find out the number of processor cores on the die - */ -static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) -{ - unsigned int eax, t; - - if (c->cpuid_level < 4) - return 1; - - cpuid_count(4, 0, &eax, &t, &t, &t); - - if (eax & 0x1f) - return ((eax >> 26) + 1); - else - return 1; -} - -static void __cpuinit srat_detect_node(void) -{ -#ifdef CONFIG_NUMA - unsigned node; - int cpu = smp_processor_id(); - int apicid = hard_smp_processor_id(); - - /* Don't do the funky fallback heuristics the AMD version employs - for now. */ - node = apicid_to_node[apicid]; - if (node == NUMA_NO_NODE || !node_online(node)) - node = first_node(node_online_map); - numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); -#endif -} - -static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) -{ - if ((c->x86 == 0xf && c->x86_model >= 0x03) || - (c->x86 == 0x6 && c->x86_model >= 0x0e)) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); -} - -static void __cpuinit init_intel(struct cpuinfo_x86 *c) -{ - /* Cache sizes */ - unsigned n; - - init_intel_cacheinfo(c); - if (c->cpuid_level > 9) { - unsigned eax = cpuid_eax(10); - /* Check for version and the number of counters */ - if ((eax & 0xff) && (((eax>>8) & 0xff) > 1)) - set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON); - } - - if (cpu_has_ds) { - unsigned int l1, l2; - rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); - if (!(l1 & (1<<11))) - set_cpu_cap(c, X86_FEATURE_BTS); - if (!(l1 & (1<<12))) - set_cpu_cap(c, X86_FEATURE_PEBS); - } - - - if (cpu_has_bts) - ds_init_intel(c); - - n = c->extended_cpuid_level; - if (n >= 0x80000008) { - unsigned eax = cpuid_eax(0x80000008); - c->x86_virt_bits = (eax >> 8) & 0xff; - c->x86_phys_bits = eax & 0xff; - /* CPUID workaround for Intel 0F34 CPU */ - if (c->x86_vendor == X86_VENDOR_INTEL && - c->x86 == 0xF && c->x86_model == 0x3 && - c->x86_mask == 0x4) - c->x86_phys_bits = 36; - } - - if (c->x86 == 15) - c->x86_cache_alignment = c->x86_clflush_size * 2; - if (c->x86 == 6) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); - c->x86_max_cores = intel_num_cpu_cores(c); - - srat_detect_node(); -} - static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) { if (c->x86 == 0x6 && c->x86_model >= 0xf) @@ -756,6 +665,8 @@ static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) // FIXME: Needs to use cpu_vendor_dev_register extern void __cpuinit early_init_amd(struct cpuinfo_x86 *c); extern void __cpuinit init_amd(struct cpuinfo_x86 *c); +extern void __cpuinit early_init_intel(struct cpuinfo_x86 *c); +extern void __cpuinit init_intel(struct cpuinfo_x86 *c); /* Do some early cpuid on the boot CPU to get some parameter that are needed before check_bugs. Everything advanced is in identify_cpu From 7e2191127eb414d7d5a11df6552ab6e3845d17a1 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 22 May 2008 18:55:06 -0400 Subject: [PATCH 207/821] x86: Remove workaround for prescott (32bit P4) from 64-bit code. Signed-off-by: Dave Jones Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/intel_64.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/x86/kernel/cpu/intel_64.c b/arch/x86/kernel/cpu/intel_64.c index e5f929f6c3d4..b33912199484 100644 --- a/arch/x86/kernel/cpu/intel_64.c +++ b/arch/x86/kernel/cpu/intel_64.c @@ -79,11 +79,6 @@ void __cpuinit init_intel(struct cpuinfo_x86 *c) unsigned eax = cpuid_eax(0x80000008); c->x86_virt_bits = (eax >> 8) & 0xff; c->x86_phys_bits = eax & 0xff; - /* CPUID workaround for Intel 0F34 CPU */ - if (c->x86_vendor == X86_VENDOR_INTEL && - c->x86 == 0xF && c->x86_model == 0x3 && - c->x86_mask == 0x4) - c->x86_phys_bits = 36; } if (c->x86 == 15) From 30a713180b3d08fdec5ca572e5a1cd35253c5d8e Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 22 May 2008 18:57:25 -0400 Subject: [PATCH 208/821] x86: Move the 64-bit Centaur specific parts out of setup_64.c Create a separate centaur_64.c file in the cpu/ dir for the useful parts to live in. Signed-off-by: Dave Jones Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/Makefile | 1 + arch/x86/kernel/cpu/centaur_64.c | 31 +++++++++++++++++++++++++++++++ arch/x86/kernel/setup_64.c | 28 ++-------------------------- 3 files changed, 34 insertions(+), 26 deletions(-) create mode 100644 arch/x86/kernel/cpu/centaur_64.c diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index b7a11924fed7..c77a1c50d944 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_X86_32) += amd.o obj-$(CONFIG_X86_64) += amd_64.o obj-$(CONFIG_X86_32) += cyrix.o obj-$(CONFIG_X86_32) += centaur.o +obj-$(CONFIG_X86_64) += centaur_64.o obj-$(CONFIG_X86_32) += transmeta.o obj-$(CONFIG_X86_32) += intel.o obj-$(CONFIG_X86_64) += intel_64.o diff --git a/arch/x86/kernel/cpu/centaur_64.c b/arch/x86/kernel/cpu/centaur_64.c new file mode 100644 index 000000000000..bac96d187d05 --- /dev/null +++ b/arch/x86/kernel/cpu/centaur_64.c @@ -0,0 +1,31 @@ +#include +#include + +#include +#include + +void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) +{ + if (c->x86 == 0x6 && c->x86_model >= 0xf) + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); +} + +void __cpuinit init_centaur(struct cpuinfo_x86 *c) +{ + /* Cache sizes */ + unsigned n; + + n = c->extended_cpuid_level; + if (n >= 0x80000008) { + unsigned eax = cpuid_eax(0x80000008); + c->x86_virt_bits = (eax >> 8) & 0xff; + c->x86_phys_bits = eax & 0xff; + } + + if (c->x86 == 0x6 && c->x86_model >= 0xf) { + c->x86_cache_alignment = c->x86_clflush_size * 2; + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + } + set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); +} diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index c4e6a0b6c303..25afdd80a3cf 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -622,32 +622,6 @@ out: #endif } -static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) -{ - if (c->x86 == 0x6 && c->x86_model >= 0xf) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); -} - -static void __cpuinit init_centaur(struct cpuinfo_x86 *c) -{ - /* Cache sizes */ - unsigned n; - - n = c->extended_cpuid_level; - if (n >= 0x80000008) { - unsigned eax = cpuid_eax(0x80000008); - c->x86_virt_bits = (eax >> 8) & 0xff; - c->x86_phys_bits = eax & 0xff; - } - - if (c->x86 == 0x6 && c->x86_model >= 0xf) { - c->x86_cache_alignment = c->x86_clflush_size * 2; - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - } - set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); -} - static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) { char *v = c->x86_vendor_id; @@ -667,6 +641,8 @@ extern void __cpuinit early_init_amd(struct cpuinfo_x86 *c); extern void __cpuinit init_amd(struct cpuinfo_x86 *c); extern void __cpuinit early_init_intel(struct cpuinfo_x86 *c); extern void __cpuinit init_intel(struct cpuinfo_x86 *c); +extern void __cpuinit early_init_centaur(struct cpuinfo_x86 *c); +extern void __cpuinit init_centaur(struct cpuinfo_x86 *c); /* Do some early cpuid on the boot CPU to get some parameter that are needed before check_bugs. Everything advanced is in identify_cpu From 1c47cd638e8302bc38be1f6d81067950e038ebd3 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Fri, 30 May 2008 15:42:45 -0700 Subject: [PATCH 209/821] x86: fix overlong line in arch/x86/kernel/cpu/amd_64.c Clean up an overlong line in arch/x86/kernel/cpu/amd_64.c. Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/amd_64.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c index 1746f6f95726..c815c2c0484b 100644 --- a/arch/x86/kernel/cpu/amd_64.c +++ b/arch/x86/kernel/cpu/amd_64.c @@ -229,7 +229,8 @@ void __cpuinit init_amd(struct cpuinfo_x86 *c) * benefit in doing so. */ if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg) && - (tseg >> PMD_SHIFT) < (max_pfn_mapped >> (PMD_SHIFT-PAGE_SHIFT))) + (tseg >> PMD_SHIFT) < + (max_pfn_mapped >> (PMD_SHIFT-PAGE_SHIFT))) set_memory_4k((unsigned long)__va(tseg), 1); } } From 23968f71b26ece45ed52895d41b0208b90a516e7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Kristian=20H=C3=B8gsberg?= Date: Thu, 29 May 2008 18:31:14 -0400 Subject: [PATCH 210/821] x86: Use structs instead of hardcoded offsets in x86 boot decompressor. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Replace hardcoded offsets embedded in macros in arch/x86/boot/compressed with proper structure references. Signed-off-by: Kristian Høgsberg Signed-off-by: H. Peter Anvin --- arch/x86/boot/compressed/misc.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-) diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index 90456cee47c3..74ed3c075ee6 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -30,6 +30,7 @@ #include #include #include +#include /* WARNING!! * This code is compiled with -fPIC and it is relocated dynamically @@ -187,13 +188,7 @@ static void gzip_release(void **); /* * This is set up by the setup-routine at boot-time */ -static unsigned char *real_mode; /* Pointer to real-mode data */ - -#define RM_EXT_MEM_K (*(unsigned short *)(real_mode + 0x2)) -#ifndef STANDARD_MEMORY_BIOS_CALL -#define RM_ALT_MEM_K (*(unsigned long *)(real_mode + 0x1e0)) -#endif -#define RM_SCREEN_INFO (*(struct screen_info *)(real_mode+0)) +static struct boot_params *real_mode; /* Pointer to real-mode data */ extern unsigned char input_data[]; extern int input_len; @@ -276,12 +271,13 @@ static void putstr(const char *s) char c; #ifdef CONFIG_X86_32 - if (RM_SCREEN_INFO.orig_video_mode == 0 && lines == 0 && cols == 0) + if (real_mode->screen_info.orig_video_mode == 0 && + lines == 0 && cols == 0) return; #endif - x = RM_SCREEN_INFO.orig_x; - y = RM_SCREEN_INFO.orig_y; + x = real_mode->screen_info.orig_x; + y = real_mode->screen_info.orig_y; while ((c = *s++) != '\0') { if (c == '\n') { @@ -302,8 +298,8 @@ static void putstr(const char *s) } } - RM_SCREEN_INFO.orig_x = x; - RM_SCREEN_INFO.orig_y = y; + real_mode->screen_info.orig_x = x; + real_mode->screen_info.orig_y = y; pos = (x + cols * y) * 2; /* Update cursor position */ outb(14, vidport); @@ -430,7 +426,7 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap, { real_mode = rmode; - if (RM_SCREEN_INFO.orig_video_mode == 7) { + if (real_mode->screen_info.orig_video_mode == 7) { vidmem = (char *) 0xb0000; vidport = 0x3b4; } else { @@ -438,8 +434,8 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap, vidport = 0x3d4; } - lines = RM_SCREEN_INFO.orig_video_lines; - cols = RM_SCREEN_INFO.orig_video_cols; + lines = real_mode->screen_info.orig_video_lines; + cols = real_mode->screen_info.orig_video_cols; window = output; /* Output buffer (Normally at 1M) */ free_mem_ptr = heap; /* Heap */ From 3b6b9293d0f8e1b11630102013ca2a1dcef17d44 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Kristian=20H=C3=B8gsberg?= Date: Thu, 29 May 2008 18:31:15 -0400 Subject: [PATCH 211/821] x86: Honor 'quiet' command line option in real mode boot decompressor. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch lets the early real mode code look for the 'quiet' option on the kernel command line and pass a loadflag to the decompressor. When this flag is set, we suppress the "Decompressing Linux... Parsing ELF... done." messages. Signed-off-by: Kristian Høgsberg Signed-off-by: H. Peter Anvin --- arch/x86/boot/compressed/misc.c | 13 ++++++++++--- arch/x86/boot/main.c | 4 ++++ include/asm-x86/bootparam.h | 1 + 3 files changed, 15 insertions(+), 3 deletions(-) diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index 74ed3c075ee6..d10e7274e1fc 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -189,6 +189,7 @@ static void gzip_release(void **); * This is set up by the setup-routine at boot-time */ static struct boot_params *real_mode; /* Pointer to real-mode data */ +static int quiet; extern unsigned char input_data[]; extern int input_len; @@ -391,7 +392,8 @@ static void parse_elf(void *output) return; } - putstr("Parsing ELF... "); + if (!quiet) + putstr("Parsing ELF... "); phdrs = malloc(sizeof(*phdrs) * ehdr.e_phnum); if (!phdrs) @@ -426,6 +428,9 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap, { real_mode = rmode; + if (real_mode->hdr.loadflags & QUIET_FLAG) + quiet = 1; + if (real_mode->screen_info.orig_video_mode == 7) { vidmem = (char *) 0xb0000; vidport = 0x3b4; @@ -461,9 +466,11 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap, #endif makecrc(); - putstr("\nDecompressing Linux... "); + if (!quiet) + putstr("\nDecompressing Linux... "); gunzip(); parse_elf(output); - putstr("done.\nBooting the kernel.\n"); + if (!quiet) + putstr("done.\nBooting the kernel.\n"); return; } diff --git a/arch/x86/boot/main.c b/arch/x86/boot/main.c index 77569a4a3be1..2296164b54d2 100644 --- a/arch/x86/boot/main.c +++ b/arch/x86/boot/main.c @@ -165,6 +165,10 @@ void main(void) /* Set the video mode */ set_video(); + /* Parse command line for 'quiet' and pass it to decompressor. */ + if (cmdline_find_option_bool("quiet")) + boot_params.hdr.loadflags |= QUIET_FLAG; + /* Do the last things and invoke protected mode */ go_to_protected_mode(); } diff --git a/include/asm-x86/bootparam.h b/include/asm-x86/bootparam.h index f62f4733606b..3e36ba8f288b 100644 --- a/include/asm-x86/bootparam.h +++ b/include/asm-x86/bootparam.h @@ -40,6 +40,7 @@ struct setup_header { __u8 type_of_loader; __u8 loadflags; #define LOADED_HIGH (1<<0) +#define QUIET_FLAG (1<<5) #define KEEP_SEGMENTS (1<<6) #define CAN_USE_HEAP (1<<7) __u16 setup_move_size; From 4039feb5bae72a5fed9ba6bc1a9cfd8dfe0a8613 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Fri, 30 May 2008 17:16:20 -0700 Subject: [PATCH 212/821] x86: update Documentation/i386/boot.txt Document QUIET_FLAG, correct the definition of several fields, make it clear this applies to the entire x86 architecture, not just i386. Signed-off-by: H. Peter Anvin --- Documentation/i386/boot.txt | 79 +++++++++++++++++++++---------------- 1 file changed, 46 insertions(+), 33 deletions(-) diff --git a/Documentation/i386/boot.txt b/Documentation/i386/boot.txt index 95ad15c3b01f..147bfe511cdd 100644 --- a/Documentation/i386/boot.txt +++ b/Documentation/i386/boot.txt @@ -1,17 +1,14 @@ - THE LINUX/I386 BOOT PROTOCOL - ---------------------------- + THE LINUX/x86 BOOT PROTOCOL + --------------------------- - H. Peter Anvin - Last update 2007-05-23 - -On the i386 platform, the Linux kernel uses a rather complicated boot +On the x86 platform, the Linux kernel uses a rather complicated boot convention. This has evolved partially due to historical aspects, as well as the desire in the early days to have the kernel itself be a bootable image, the complicated PC memory model and due to changed expectations in the PC industry caused by the effective demise of real-mode DOS as a mainstream operating system. -Currently, the following versions of the Linux/i386 boot protocol exist. +Currently, the following versions of the Linux/x86 boot protocol exist. Old kernels: zImage/Image support only. Some very early kernels may not even support a command line. @@ -372,10 +369,17 @@ Protocol: 2.00+ - If 0, the protected-mode code is loaded at 0x10000. - If 1, the protected-mode code is loaded at 0x100000. + Bit 5 (write): QUIET_FLAG + - If 0, print early messages. + - If 1, suppress early messages. + This requests to the kernel (decompressor and early + kernel) to not write early messages that require + accessing the display hardware directly. + Bit 6 (write): KEEP_SEGMENTS Protocol: 2.07+ - - if 0, reload the segment registers in the 32bit entry point. - - if 1, do not reload the segment registers in the 32bit entry point. + - If 0, reload the segment registers in the 32bit entry point. + - If 1, do not reload the segment registers in the 32bit entry point. Assume that %cs %ds %ss %es are all set to flat segments with a base of 0 (or the equivalent for their environment). @@ -504,7 +508,7 @@ Protocol: 2.06+ maximum size was 255. Field name: hardware_subarch -Type: write +Type: write (optional, defaults to x86/PC) Offset/size: 0x23c/4 Protocol: 2.07+ @@ -520,11 +524,13 @@ Protocol: 2.07+ 0x00000002 Xen Field name: hardware_subarch_data -Type: write +Type: write (subarch-dependent) Offset/size: 0x240/8 Protocol: 2.07+ A pointer to data that is specific to hardware subarch + This field is currently unused for the default x86/PC environment, + do not modify. Field name: payload_offset Type: read @@ -545,6 +551,34 @@ Protocol: 2.08+ The length of the payload. +Field name: setup_data +Type: write (special) +Offset/size: 0x250/8 +Protocol: 2.09+ + + The 64-bit physical pointer to NULL terminated single linked list of + struct setup_data. This is used to define a more extensible boot + parameters passing mechanism. The definition of struct setup_data is + as follow: + + struct setup_data { + u64 next; + u32 type; + u32 len; + u8 data[0]; + }; + + Where, the next is a 64-bit physical pointer to the next node of + linked list, the next field of the last node is 0; the type is used + to identify the contents of data; the len is the length of data + field; the data holds the real payload. + + This list may be modified at a number of points during the bootup + process. Therefore, when modifying this list one should always make + sure to consider the case where the linked list already contains + entries. + + **** THE IMAGE CHECKSUM From boot protocol version 2.08 onwards the CRC-32 is calculated over @@ -553,6 +587,7 @@ initial remainder of 0xffffffff. The checksum is appended to the file; therefore the CRC of the file up to the limit specified in the syssize field of the header is always 0. + **** THE KERNEL COMMAND LINE The kernel command line has become an important way for the boot @@ -584,28 +619,6 @@ command line is entered using the following protocol: covered by setup_move_size, so you may need to adjust this field. -Field name: setup_data -Type: write (obligatory) -Offset/size: 0x250/8 -Protocol: 2.09+ - - The 64-bit physical pointer to NULL terminated single linked list of - struct setup_data. This is used to define a more extensible boot - parameters passing mechanism. The definition of struct setup_data is - as follow: - - struct setup_data { - u64 next; - u32 type; - u32 len; - u8 data[0]; - }; - - Where, the next is a 64-bit physical pointer to the next node of - linked list, the next field of the last node is 0; the type is used - to identify the contents of data; the len is the length of data - field; the data holds the real payload. - **** MEMORY LAYOUT OF THE REAL-MODE CODE From 23deb06821442506615f34bd92ccd6a2422629d7 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Fri, 30 May 2008 17:19:03 -0700 Subject: [PATCH 213/821] x86: move x86-specific documentation into Documentation/x86 The current organization of the x86 documentation makes it appear as if the "i386" documentation doesn't apply to x86-64, which is does. Thus, move that documentation into Documentation/x86, and move the x86-64-specific stuff into Documentation/x86/x86_64 with the eventual goal to move stuff that isn't actually 64-bit specific back into Documentation/x86. Signed-off-by: H. Peter Anvin --- Documentation/{ => x86}/i386/IO-APIC.txt | 0 Documentation/{ => x86}/i386/boot.txt | 0 Documentation/{ => x86}/i386/usb-legacy-support.txt | 0 Documentation/{ => x86}/i386/zero-page.txt | 0 Documentation/{ => x86}/x86_64/00-INDEX | 0 Documentation/{ => x86}/x86_64/boot-options.txt | 0 Documentation/{ => x86}/x86_64/cpu-hotplug-spec | 0 Documentation/{ => x86}/x86_64/fake-numa-for-cpusets | 0 Documentation/{ => x86}/x86_64/kernel-stacks | 0 Documentation/{ => x86}/x86_64/machinecheck | 0 Documentation/{ => x86}/x86_64/mm.txt | 0 Documentation/{ => x86}/x86_64/uefi.txt | 0 12 files changed, 0 insertions(+), 0 deletions(-) rename Documentation/{ => x86}/i386/IO-APIC.txt (100%) rename Documentation/{ => x86}/i386/boot.txt (100%) rename Documentation/{ => x86}/i386/usb-legacy-support.txt (100%) rename Documentation/{ => x86}/i386/zero-page.txt (100%) rename Documentation/{ => x86}/x86_64/00-INDEX (100%) rename Documentation/{ => x86}/x86_64/boot-options.txt (100%) rename Documentation/{ => x86}/x86_64/cpu-hotplug-spec (100%) rename Documentation/{ => x86}/x86_64/fake-numa-for-cpusets (100%) rename Documentation/{ => x86}/x86_64/kernel-stacks (100%) rename Documentation/{ => x86}/x86_64/machinecheck (100%) rename Documentation/{ => x86}/x86_64/mm.txt (100%) rename Documentation/{ => x86}/x86_64/uefi.txt (100%) diff --git a/Documentation/i386/IO-APIC.txt b/Documentation/x86/i386/IO-APIC.txt similarity index 100% rename from Documentation/i386/IO-APIC.txt rename to Documentation/x86/i386/IO-APIC.txt diff --git a/Documentation/i386/boot.txt b/Documentation/x86/i386/boot.txt similarity index 100% rename from Documentation/i386/boot.txt rename to Documentation/x86/i386/boot.txt diff --git a/Documentation/i386/usb-legacy-support.txt b/Documentation/x86/i386/usb-legacy-support.txt similarity index 100% rename from Documentation/i386/usb-legacy-support.txt rename to Documentation/x86/i386/usb-legacy-support.txt diff --git a/Documentation/i386/zero-page.txt b/Documentation/x86/i386/zero-page.txt similarity index 100% rename from Documentation/i386/zero-page.txt rename to Documentation/x86/i386/zero-page.txt diff --git a/Documentation/x86_64/00-INDEX b/Documentation/x86/x86_64/00-INDEX similarity index 100% rename from Documentation/x86_64/00-INDEX rename to Documentation/x86/x86_64/00-INDEX diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt similarity index 100% rename from Documentation/x86_64/boot-options.txt rename to Documentation/x86/x86_64/boot-options.txt diff --git a/Documentation/x86_64/cpu-hotplug-spec b/Documentation/x86/x86_64/cpu-hotplug-spec similarity index 100% rename from Documentation/x86_64/cpu-hotplug-spec rename to Documentation/x86/x86_64/cpu-hotplug-spec diff --git a/Documentation/x86_64/fake-numa-for-cpusets b/Documentation/x86/x86_64/fake-numa-for-cpusets similarity index 100% rename from Documentation/x86_64/fake-numa-for-cpusets rename to Documentation/x86/x86_64/fake-numa-for-cpusets diff --git a/Documentation/x86_64/kernel-stacks b/Documentation/x86/x86_64/kernel-stacks similarity index 100% rename from Documentation/x86_64/kernel-stacks rename to Documentation/x86/x86_64/kernel-stacks diff --git a/Documentation/x86_64/machinecheck b/Documentation/x86/x86_64/machinecheck similarity index 100% rename from Documentation/x86_64/machinecheck rename to Documentation/x86/x86_64/machinecheck diff --git a/Documentation/x86_64/mm.txt b/Documentation/x86/x86_64/mm.txt similarity index 100% rename from Documentation/x86_64/mm.txt rename to Documentation/x86/x86_64/mm.txt diff --git a/Documentation/x86_64/uefi.txt b/Documentation/x86/x86_64/uefi.txt similarity index 100% rename from Documentation/x86_64/uefi.txt rename to Documentation/x86/x86_64/uefi.txt From f0d43100f13be0fa5bf52741d7084bb27f00e621 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 29 May 2008 12:56:36 -0700 Subject: [PATCH 214/821] x86: extend e820 early_res support 32bit -fix #3 introduce init_pg_table_start, so xen PV could specify the value. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/head32.c | 3 ++- arch/x86/kernel/head_32.S | 2 ++ arch/x86/kernel/setup_32.c | 7 +++++++ arch/x86/lguest/boot.c | 5 +++-- arch/x86/xen/enlighten.c | 3 ++- include/asm-x86/setup.h | 6 ++++-- 6 files changed, 20 insertions(+), 6 deletions(-) diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index c216d3c2a991..0b6cb9fba71e 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -76,7 +76,8 @@ void __init i386_start_kernel(void) reserve_early(ramdisk_image, ramdisk_end, "RAMDISK"); } #endif - reserve_early(__pa_symbol(&_end), init_pg_tables_end, "INIT_PG_TABLE"); + reserve_early(init_pg_tables_start, init_pg_tables_end, + "INIT_PG_TABLE"); reserve_ebda_region(); diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index b2cc73768a9d..bef4618feadb 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -194,6 +194,7 @@ default_entry: xorl %ebx,%ebx /* %ebx is kept at zero */ movl $pa(pg0), %edi + movl %edi, pa(init_pg_tables_start) movl $pa(swapper_pg_pmd), %edx movl $PTE_ATTR, %eax 10: @@ -228,6 +229,7 @@ default_entry: page_pde_offset = (__PAGE_OFFSET >> 20); movl $pa(pg0), %edi + movl %edi, pa(init_pg_tables_start) movl $pa(swapper_pg_dir), %edx movl $PTE_ATTR, %eax 10: diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 08b47a2f7af0..de9c5ee77d07 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -71,6 +71,7 @@ /* This value is set up by the early boot code to point to the value immediately after the boot time page tables. It contains a *physical* address, and must not be in the .bss segment! */ +unsigned long init_pg_tables_start __initdata = ~0UL; unsigned long init_pg_tables_end __initdata = ~0UL; /* @@ -485,6 +486,10 @@ static void __init reserve_initrd(void) return; } + printk(KERN_INFO "old RAMDISK: %08llx - %08llx\n", ramdisk_image, + ramdisk_end); + + if (ramdisk_end <= end_of_lowmem) { /* All in lowmem, easy case */ /* @@ -511,6 +516,8 @@ static void __init reserve_initrd(void) "NEW RAMDISK"); initrd_start = ramdisk_here + PAGE_OFFSET; initrd_end = initrd_start + ramdisk_size; + printk(KERN_INFO "Allocated new RAMDISK: %08llx - %08llx\n", + ramdisk_here, ramdisk_here + ramdisk_size); do_relocate_initrd = true; } diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index af65b2da3ba0..bf7c34a3aaeb 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -1011,6 +1011,7 @@ __init void lguest_init(void) * clobbered. The Launcher places our initial pagetables somewhere at * the top of our physical memory, so we don't need extra space: set * init_pg_tables_end to the end of the kernel. */ + init_pg_tables_start = __pa(pg0); init_pg_tables_end = __pa(pg0); /* Load the %fs segment register (the per-cpu segment register) with @@ -1064,9 +1065,9 @@ __init void lguest_init(void) pm_power_off = lguest_power_off; machine_ops.restart = lguest_restart; - /* Now we're set up, call start_kernel() in init/main.c and we proceed + /* Now we're set up, call i386_start_kernel() in head32.c and we proceed * to boot as normal. It never returns. */ - start_kernel(); + i386_start_kernel(); } /* * This marks the end of stage II of our journey, The Guest. diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index c8a56e457d61..ccc7b84ddabf 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1211,6 +1211,7 @@ asmlinkage void __init xen_start_kernel(void) pgd = (pgd_t *)xen_start_info->pt_base; + init_pg_tables_start = __pa(pgd); init_pg_tables_end = __pa(pgd) + xen_start_info->nr_pt_frames*PAGE_SIZE; init_mm.pgd = pgd; /* use the Xen pagetables to start */ @@ -1246,5 +1247,5 @@ asmlinkage void __init xen_start_kernel(void) add_preferred_console("hvc", 0, NULL); /* Start the world */ - start_kernel(); + i386_start_kernel(); } diff --git a/include/asm-x86/setup.h b/include/asm-x86/setup.h index ffa0f540fc7f..64f5f0c11d66 100644 --- a/include/asm-x86/setup.h +++ b/include/asm-x86/setup.h @@ -59,10 +59,12 @@ int __init copy_e820_map(struct e820entry *biosmap, int nr_map); void __init add_memory_region(unsigned long long start, unsigned long long size, int type); + +void __init i386_start_kernel(void); + +extern unsigned long init_pg_tables_start; extern unsigned long init_pg_tables_end; - - #endif /* __i386__ */ #endif /* _SETUP */ #endif /* __ASSEMBLY__ */ From 163872950dc856fd23849c27f60049feaac49ae6 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 29 May 2008 12:57:22 -0700 Subject: [PATCH 215/821] x86: extend e820 early_res support 32bit -fix #4 reserve_early pgdata for 32bit numa Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/mm/discontig_32.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index 914ccf983687..47749727907e 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -159,8 +159,13 @@ static void __init allocate_pgdat(int nid) if (nid && node_has_online_mem(nid)) NODE_DATA(nid) = (pg_data_t *)node_remap_start_vaddr[nid]; else { - NODE_DATA(nid) = (pg_data_t *)(pfn_to_kaddr(min_low_pfn)); - min_low_pfn += PFN_UP(sizeof(pg_data_t)); + unsigned long pgdat_phys; + pgdat_phys = find_e820_area(min_low_pfn<>PAGE_SHIFT)); + reserve_early(pgdat_phys, pgdat_phys + sizeof(pg_data_t), + "NODE_DATA"); } } From a5481280b29b6a3db912ec100498bd31eaa6d2db Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 29 May 2008 12:58:37 -0700 Subject: [PATCH 216/821] x86: extend e820 early_res support 32bit -fix #5 reserve early numa kva, so it will not clash with new RAMDISK Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup_32.c | 1 - arch/x86/mm/discontig_32.c | 12 +++++------- include/asm-x86/mmzone_32.h | 4 ---- 3 files changed, 5 insertions(+), 12 deletions(-) diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index de9c5ee77d07..6f40cb560ea9 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -614,7 +614,6 @@ void __init setup_bootmem_allocator(void) */ find_smp_config(); #endif - numa_kva_reserve(); reserve_crashkernel(); reserve_ibft_region(); diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index 47749727907e..55fdbab6b014 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -357,6 +357,11 @@ unsigned long __init setup_memory(void) printk("kva_start_pfn ~ %ld find_max_low_pfn() ~ %ld\n", kva_start_pfn, max_low_pfn); printk("max_pfn = %ld\n", max_pfn); + + /* avoid clash with initrd */ + reserve_early(kva_start_pfn< system_max_low_pfn) @@ -392,13 +397,6 @@ unsigned long __init setup_memory(void) return max_low_pfn; } -void __init numa_kva_reserve(void) -{ - if (kva_pages) - reserve_bootmem(PFN_PHYS(kva_start_pfn), PFN_PHYS(kva_pages), - BOOTMEM_DEFAULT); -} - void __init zone_sizes_init(void) { int nid; diff --git a/include/asm-x86/mmzone_32.h b/include/asm-x86/mmzone_32.h index cb2cad0b65a7..faef751181b7 100644 --- a/include/asm-x86/mmzone_32.h +++ b/include/asm-x86/mmzone_32.h @@ -38,16 +38,12 @@ static inline void get_memcfg_numa(void) } extern int early_pfn_to_nid(unsigned long pfn); -extern void numa_kva_reserve(void); #else /* !CONFIG_NUMA */ #define get_memcfg_numa get_memcfg_numa_flat #define get_zholes_size(n) (0) -static inline void numa_kva_reserve(void) -{ -} #endif /* CONFIG_NUMA */ #ifdef CONFIG_DISCONTIGMEM From 9a73aa81ffb993382afed2ed404bc2b330d75427 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 29 May 2008 16:25:56 -0700 Subject: [PATCH 217/821] x86: 32bit numa srat fix early_ioremap leak on two node system (16g RAM) with numa config I got this crash: get_memcfg_from_srat: assigning address to rsdp RSD PTR v0 [ACPIAM] ACPI: Too big length in RSDT: 92 failed to get NUMA memory information from SRAT table NUMA - single node, flat memory mode Node: 0, start_pfn: 0, end_pfn: 153 Setting physnode_map array to node 0 for pfns: 0 ... Pid: 0, comm: swapper Not tainted 2.6.26-rc4 #4 [<80b41289>] hlt_loop+0x0/0x3 [<8011efa0>] ? alloc_remap+0x50/0x70 [<8079e32e>] alloc_node_mem_map+0x5e/0xa0 [<8012e77b>] ? printk+0x1b/0x20 [<80b590f6>] free_area_init_node+0xc6/0x470 [<80b588fc>] ? __alloc_bootmem_node+0x2c/0x50 [<80b58ad8>] ? find_min_pfn_for_node+0x38/0x70 [<8012e77b>] ? printk+0x1b/0x20 [<80b597c4>] free_area_init_nodes+0x254/0x2d0 [<80b544d7>] zone_sizes_init+0x97/0xa0 [<80b48a03>] setup_arch+0x383/0x530 [<8012e77b>] ? printk+0x1b/0x20 [<80b41aa4>] start_kernel+0x64/0x350 [<80b412d8>] i386_start_kernel+0x8/0x10 ======================= this patch increases the acpi table limit to 32. Also match early_ioremap() with early_iounmap(). Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/srat_32.c | 37 ++++++++++++++++++++++++++----------- 1 file changed, 26 insertions(+), 11 deletions(-) diff --git a/arch/x86/kernel/srat_32.c b/arch/x86/kernel/srat_32.c index 70e4a374b4e8..88971ee166d4 100644 --- a/arch/x86/kernel/srat_32.c +++ b/arch/x86/kernel/srat_32.c @@ -261,7 +261,7 @@ out_fail: struct acpi_static_rsdt { struct acpi_table_rsdt table; - u32 padding[7]; /* Allow for 7 more table entries */ + u32 padding[32]; /* Allow for 32 more table entries */ }; int __init get_memcfg_from_srat(void) @@ -297,7 +297,7 @@ int __init get_memcfg_from_srat(void) } rsdt = (struct acpi_table_rsdt *) - early_ioremap(rsdp->rsdt_physical_address, sizeof(struct acpi_table_rsdt)); + early_ioremap(rsdp->rsdt_physical_address, sizeof(saved_rsdt)); if (!rsdt) { printk(KERN_WARNING @@ -310,6 +310,7 @@ int __init get_memcfg_from_srat(void) if (strncmp(header->signature, ACPI_SIG_RSDT, strlen(ACPI_SIG_RSDT))) { printk(KERN_WARNING "ACPI: RSDT signature incorrect\n"); + early_iounmap(rsdt, sizeof(saved_rsdt)); goto out_err; } @@ -319,37 +320,51 @@ int __init get_memcfg_from_srat(void) * size of RSDT) divided by the size of each entry * (4-byte table pointers). */ - tables = (header->length - sizeof(struct acpi_table_header)) / 4; + tables = (header->length - sizeof(struct acpi_table_header)) / sizeof(u32); if (!tables) goto out_err; memcpy(&saved_rsdt, rsdt, sizeof(saved_rsdt)); - + early_iounmap(rsdt, sizeof(saved_rsdt)); if (saved_rsdt.table.header.length > sizeof(saved_rsdt)) { printk(KERN_WARNING "ACPI: Too big length in RSDT: %d\n", saved_rsdt.table.header.length); goto out_err; } - printk("Begin SRAT table scan....\n"); + printk("Begin SRAT table scan....%d\n", tables); - for (i = 0; i < tables; i++) { + for (i = 0; i < tables; i++){ + int result; + u32 length; /* Map in header, then map in full table length. */ header = (struct acpi_table_header *) early_ioremap(saved_rsdt.table.table_offset_entry[i], sizeof(struct acpi_table_header)); if (!header) break; + + printk(KERN_INFO "ACPI: %4.4s %08lX, %04X\n", + header->signature, + (unsigned long)saved_rsdt.table.table_offset_entry[i], + header->length); + + if (strncmp((char *) &header->signature, ACPI_SIG_SRAT, 4)) { + early_iounmap(header, sizeof(struct acpi_table_header)); + continue; + } + + length = header->length; + early_iounmap(header, sizeof(struct acpi_table_header)); header = (struct acpi_table_header *) - early_ioremap(saved_rsdt.table.table_offset_entry[i], header->length); + early_ioremap(saved_rsdt.table.table_offset_entry[i], length); if (!header) break; - if (strncmp((char *) &header->signature, ACPI_SIG_SRAT, 4)) - continue; - /* we've found the srat table. don't need to look at any more tables */ - return acpi20_parse_srat((struct acpi_table_srat *)header); + result = acpi20_parse_srat((struct acpi_table_srat *)header); + early_iounmap(header, length); + return result; } out_err: remove_all_active_ranges(); From 831d991821daedd4839073dbca55514432ef1768 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Mon, 3 Sep 2007 10:17:39 +0200 Subject: [PATCH 218/821] x86: add PCI extended config space access for AMD Barcelona This patch implements PCI extended configuration space access for AMD's Barcelona CPUs. It extends the method using CF8/CFC IO addresses. An x86 capability bit has been introduced that is set for CPUs supporting PCI extended config space accesses. Signed-off-by: Robert Richter Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/amd.c | 4 ++++ arch/x86/kernel/cpu/amd_64.c | 3 +++ arch/x86/kernel/setup.c | 13 +++++++++++++ arch/x86/kernel/setup.h | 26 ++++++++++++++++++++++++++ arch/x86/kernel/setup_64.c | 2 ++ arch/x86/pci/direct.c | 21 +++++++++++++++------ include/asm-x86/cpufeature.h | 2 ++ 7 files changed, 65 insertions(+), 6 deletions(-) create mode 100644 arch/x86/kernel/setup.h diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 245866828294..99221f9834e4 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -6,6 +6,7 @@ #include #include +#include "../setup.h" #include "cpu.h" /* @@ -308,6 +309,9 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) if (cpu_has_xmm2) set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); + + if (c->x86 == 0x10) + amd_enable_pci_ext_cfg(c); } static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int size) diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c index c815c2c0484b..180097e99219 100644 --- a/arch/x86/kernel/cpu/amd_64.c +++ b/arch/x86/kernel/cpu/amd_64.c @@ -217,6 +217,9 @@ void __cpuinit init_amd(struct cpuinfo_x86 *c) if (c->x86 == 0x10) fam10h_check_enable_mmcfg(); + if (c->x86 == 0x10) + amd_enable_pci_ext_cfg(c); + if (amd_apic_timer_broken()) disable_apic_timer = 1; diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 6f80b852a196..d8f171234013 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -136,4 +136,17 @@ void __init setup_per_cpu_areas(void) setup_cpumask_of_cpu(); } +#define ENABLE_CF8_EXT_CFG (1ULL << 46) + +void __cpuinit amd_enable_pci_ext_cfg(struct cpuinfo_x86 *c) +{ + u64 reg; + rdmsrl(MSR_AMD64_NB_CFG, reg); + if (!(reg & ENABLE_CF8_EXT_CFG)) { + reg |= ENABLE_CF8_EXT_CFG; + wrmsrl(MSR_AMD64_NB_CFG, reg); + } + set_cpu_cap(c, X86_FEATURE_PCI_EXT_CFG); +} + #endif diff --git a/arch/x86/kernel/setup.h b/arch/x86/kernel/setup.h new file mode 100644 index 000000000000..66cc2c7f961d --- /dev/null +++ b/arch/x86/kernel/setup.h @@ -0,0 +1,26 @@ +/* + * Internal declarations for shared x86 setup code. + * + * Copyright (c) 2008 Advanced Micro Devices, Inc. + * Contributed by Robert Richter + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public + * License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#ifndef _ARCH_X86_KERNEL_SETUP_H + +extern void __cpuinit amd_enable_pci_ext_cfg(struct cpuinfo_x86 *c); + +#endif /* _ARCH_X86_KERNEL_SETUP_H */ diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 25afdd80a3cf..215bd67e5b6c 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -73,6 +73,8 @@ #include #include +#include "setup.h" + #include #ifdef CONFIG_PARAVIRT #include diff --git a/arch/x86/pci/direct.c b/arch/x86/pci/direct.c index 21d1e0e0d535..27d61b63def6 100644 --- a/arch/x86/pci/direct.c +++ b/arch/x86/pci/direct.c @@ -8,18 +8,21 @@ #include "pci.h" /* - * Functions for accessing PCI configuration space with type 1 accesses + * Functions for accessing PCI base (first 256 bytes) and extended + * (4096 bytes per PCI function) configuration space with type 1 + * accesses. */ #define PCI_CONF1_ADDRESS(bus, devfn, reg) \ - (0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3)) + (0x80000000 | ((reg & 0xF00) << 16) | (bus << 16) \ + | (devfn << 8) | (reg & 0xFC)) static int pci_conf1_read(unsigned int seg, unsigned int bus, unsigned int devfn, int reg, int len, u32 *value) { unsigned long flags; - if ((bus > 255) || (devfn > 255) || (reg > 255)) { + if ((bus > 255) || (devfn > 255) || (reg > 4095)) { *value = -1; return -EINVAL; } @@ -50,7 +53,7 @@ static int pci_conf1_write(unsigned int seg, unsigned int bus, { unsigned long flags; - if ((bus > 255) || (devfn > 255) || (reg > 255)) + if ((bus > 255) || (devfn > 255) || (reg > 4095)) return -EINVAL; spin_lock_irqsave(&pci_config_lock, flags); @@ -260,10 +263,16 @@ void __init pci_direct_init(int type) return; printk(KERN_INFO "PCI: Using configuration type %d for base access\n", type); - if (type == 1) + if (type == 1) { raw_pci_ops = &pci_direct_conf1; - else + if (!raw_pci_ext_ops && cpu_has_pci_ext_cfg) { + printk(KERN_INFO "PCI: Using configuration type 1 " + "for extended access\n"); + raw_pci_ext_ops = &pci_direct_conf1; + } + } else { raw_pci_ops = &pci_direct_conf2; + } } int __init pci_direct_probe(void) diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h index 0d609c837a41..40fcbba00f15 100644 --- a/include/asm-x86/cpufeature.h +++ b/include/asm-x86/cpufeature.h @@ -79,6 +79,7 @@ #define X86_FEATURE_REP_GOOD (3*32+16) /* rep microcode works well on this CPU */ #define X86_FEATURE_MFENCE_RDTSC (3*32+17) /* Mfence synchronizes RDTSC */ #define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* Lfence synchronizes RDTSC */ +#define X86_FEATURE_PCI_EXT_CFG (3*32+19) /* PCI extended cfg access */ /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */ #define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */ @@ -187,6 +188,7 @@ extern const char * const x86_power_flags[32]; #define cpu_has_gbpages boot_cpu_has(X86_FEATURE_GBPAGES) #define cpu_has_arch_perfmon boot_cpu_has(X86_FEATURE_ARCH_PERFMON) #define cpu_has_pat boot_cpu_has(X86_FEATURE_PAT) +#define cpu_has_pci_ext_cfg boot_cpu_has(X86_FEATURE_PCI_EXT_CFG) #if defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_64) # define cpu_has_invlpg 1 From 6fc92866a4a6778a9732a14b61f70cb9014b2a1a Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 2 Jun 2008 10:54:16 +0200 Subject: [PATCH 219/821] fix build bug in "x86: add PCI extended config space access for AMD Barcelona" Signed-off-by: Ingo Molnar --- include/asm-x86/mmconfig.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/asm-x86/mmconfig.h b/include/asm-x86/mmconfig.h index 95beda07c6fa..46d6bb135df4 100644 --- a/include/asm-x86/mmconfig.h +++ b/include/asm-x86/mmconfig.h @@ -9,4 +9,6 @@ static inline void fam10h_check_enable_mmcfg(void) { } static inline void check_enable_amd_mmconf_dmi(void) { } #endif +extern void __cpuinit amd_enable_pci_ext_cfg(struct cpuinfo_x86 *c); + #endif From c46e62f73569d7ef42255bd6f31e35925b7f1492 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 28 May 2008 12:42:57 +0200 Subject: [PATCH 220/821] i8259: fix final ugliness Introduce IRQx_VECTOR on 32-bit, so that #ifdef noise is kept down. There should be no object code change. [ mingo@elte.hu: merged to x86/irq not x86/i8259 due to x86/irq having restructured the vector code into asm-x86/irq_vectors.h, which this patch touches. ] Signed-off-by: Pavel Machek Signed-off-by: Ingo Molnar --- arch/x86/kernel/i8259.c | 22 ++++++++-------------- include/asm-x86/irq_vectors.h | 9 ++++++--- 2 files changed, 14 insertions(+), 17 deletions(-) diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 7a0fda8f01b5..dc92b49d9204 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -297,34 +297,28 @@ void init_8259A(int auto_eoi) * outb_pic - this has to work on a wide range of PC hardware. */ outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ -#ifndef CONFIG_X86_64 - outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ - outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ -#else /* CONFIG_X86_64 */ - /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ + + /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 on x86-64, + to 0x20-0x27 on i386 */ outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); + /* 8259A-1 (the master) has a slave on IR2 */ - outb_pic(0x04, PIC_MASTER_IMR); -#endif /* CONFIG_X86_64 */ + outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); + if (auto_eoi) /* master does Auto EOI */ outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); else /* master expects normal EOI */ outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ -#ifndef CONFIG_X86_64 - outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ - outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ - outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ -#else /* CONFIG_X86_64 */ - /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ + + /* ICW2: 8259A-2 IR0-7 mapped to IRQ8_VECTOR */ outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); -#endif /* CONFIG_X86_64 */ if (auto_eoi) /* * In AEOI mode we just have to mask the interrupt diff --git a/include/asm-x86/irq_vectors.h b/include/asm-x86/irq_vectors.h index 3cb6d8c77b39..b58581e2e24e 100644 --- a/include/asm-x86/irq_vectors.h +++ b/include/asm-x86/irq_vectors.h @@ -18,17 +18,20 @@ #endif /* - * Vectors 0x20-0x2f are used for ISA interrupts on 32 bit. - * * Reserve the lowest usable priority level 0x20 - 0x2f for triggering * cleanup after irq migration on 64 bit. */ #define IRQ_MOVE_CLEANUP_VECTOR FIRST_EXTERNAL_VECTOR /* - * Vectors 0x30-0x3f are used for ISA interrupts on 64 bit + * Vectors 0x20-0x2f are used for ISA interrupts on 32 bit. + * Vectors 0x30-0x3f are used for ISA interrupts on 64 bit. */ +#ifdef CONFIG_X86_32 +#define IRQ0_VECTOR (FIRST_EXTERNAL_VECTOR) +#else #define IRQ0_VECTOR (FIRST_EXTERNAL_VECTOR + 0x10) +#endif #define IRQ1_VECTOR (IRQ0_VECTOR + 1) #define IRQ2_VECTOR (IRQ0_VECTOR + 2) #define IRQ3_VECTOR (IRQ0_VECTOR + 3) From c78277288e3d561d55fb48bc0fe8d6e2cf4d0880 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 29 May 2008 09:02:19 +0100 Subject: [PATCH 221/821] CONFIG_PM_SLEEP fix: xen: fix compilation when CONFIG_PM_SLEEP is disabled Xen save/restore depends on CONFIG_PM_SLEEP being set for device_power_up/down. Signed-off-by: Jeremy Fitzhardinge Acked-by: Randy Dunlap Signed-off-by: Ingo Molnar --- drivers/xen/manage.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index 675c3dd23962..5b546e365f00 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -31,6 +31,7 @@ enum shutdown_state { /* Ignore multiple shutdown requests. */ static enum shutdown_state shutting_down = SHUTDOWN_INVALID; +#ifdef CONFIG_PM_SLEEP static int xen_suspend(void *data) { int *cancelled = data; @@ -121,6 +122,7 @@ out: #endif shutting_down = SHUTDOWN_INVALID; } +#endif /* CONFIG_PM_SLEEP */ static void shutdown_handler(struct xenbus_watch *watch, const char **vec, unsigned int len) From 1a5726528a70bb239bdd149aef7f2155cd2b1699 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 2 Jun 2008 12:21:36 +0200 Subject: [PATCH 222/821] fix build bug in "x86: add PCI extended config space access for AMD Barcelona" --- arch/x86/kernel/cpu/amd.c | 1 + include/asm-x86/mmconfig.h | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 99221f9834e4..656b40aed647 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -4,6 +4,7 @@ #include #include #include +#include #include #include "../setup.h" diff --git a/include/asm-x86/mmconfig.h b/include/asm-x86/mmconfig.h index 46d6bb135df4..691798fbee10 100644 --- a/include/asm-x86/mmconfig.h +++ b/include/asm-x86/mmconfig.h @@ -9,6 +9,10 @@ static inline void fam10h_check_enable_mmcfg(void) { } static inline void check_enable_amd_mmconf_dmi(void) { } #endif +#if defined(CONFIG_SMP) && defined(CONFIG_X86_64) extern void __cpuinit amd_enable_pci_ext_cfg(struct cpuinfo_x86 *c); +#else +static inline void amd_enable_pci_ext_cfg(struct cpuinfo_x86 *c) { } +#endif #endif From c1f64a58003fd2efaa725a857e269a15f765791a Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 27 May 2008 09:47:13 -0700 Subject: [PATCH 223/821] x86: MMIO and gcc re-ordering issue On Tue, 27 May 2008, Linus Torvalds wrote: > > Expecting people to fix up all drivers is simply not going to happen. And > serializing things shouldn't be *that* expensive. People who cannot take > the expense can continue to use the magic __raw_writel() etc stuff. Of course, for non-x86, you kind of have to expect drivers to be well-behaved, so non-x86 can probably avoid this simply because there are less relevant drivers involved. Here's a UNTESTED patch for x86 that may or may not compile and work, and which serializes (on a compiler level) the IO accesses against regular memory accesses. __read[bwlq]()/__write[bwlq]() are not serialized with a :"memory" barrier, although since they still use "asm volatile" I suspect that i practice they are probably serial too. Did not look very closely at any generated code (only did a trivial test to see that the code looks *roughly* correct). Signed-off-by: Ingo Molnar --- include/asm-x86/io.h | 56 ++++++++++++++++++++++++++++++++ include/asm-x86/io_32.h | 49 ---------------------------- include/asm-x86/io_64.h | 71 ----------------------------------------- 3 files changed, 56 insertions(+), 120 deletions(-) diff --git a/include/asm-x86/io.h b/include/asm-x86/io.h index d5b11f60dbd0..8e9eca93f9b9 100644 --- a/include/asm-x86/io.h +++ b/include/asm-x86/io.h @@ -3,6 +3,62 @@ #define ARCH_HAS_IOREMAP_WC +#include + +#define build_mmio_read(name, size, type, reg, barrier) \ +static inline type name(const volatile void __iomem *addr) \ +{ type ret; asm volatile("mov" size " %1,%0":"=" reg (ret) \ +:"m" (*(volatile type __force *)addr) barrier); return ret; } + +#define build_mmio_write(name, size, type, reg, barrier) \ +static inline void name(type val, volatile void __iomem *addr) \ +{ asm volatile("mov" size " %0,%1": :reg (val), \ +"m" (*(volatile type __force *)addr) barrier); } + +build_mmio_read(readb, "b", unsigned char, "q", :"memory") +build_mmio_read(readw, "w", unsigned short, "r", :"memory") +build_mmio_read(readl, "l", unsigned int, "r", :"memory") + +build_mmio_read(__readb, "b", unsigned char, "q", ) +build_mmio_read(__readw, "w", unsigned short, "r", ) +build_mmio_read(__readl, "l", unsigned int, "r", ) + +build_mmio_write(writeb, "b", unsigned char, "q", :"memory") +build_mmio_write(writew, "w", unsigned short, "r", :"memory") +build_mmio_write(writel, "l", unsigned int, "r", :"memory") + +build_mmio_write(__writeb, "b", unsigned char, "q", ) +build_mmio_write(__writew, "w", unsigned short, "r", ) +build_mmio_write(__writel, "l", unsigned int, "r", ) + +#define readb_relaxed(a) __readb(a) +#define readw_relaxed(a) __readw(a) +#define readl_relaxed(a) __readl(a) +#define __raw_readb __readb +#define __raw_readw __readw +#define __raw_readl __readl + +#define __raw_writeb __writeb +#define __raw_writew __writew +#define __raw_writel __writel + +#define mmiowb() barrier() + +#ifdef CONFIG_X86_64 +build_mmio_read(readq, "q", unsigned long, "r", :"memory") +build_mmio_read(__readq, "q", unsigned long, "r", ) +build_mmio_write(writeq, "q", unsigned long, "r", :"memory") +build_mmio_write(__writeq, "q", unsigned long, "r", ) + +#define readq_relaxed(a) __readq(a) +#define __raw_readq __readq +#define __raw_writeq writeq + +/* Let people know we have them */ +#define readq readq +#define writeq writeq +#endif + #ifdef CONFIG_X86_32 # include "io_32.h" #else diff --git a/include/asm-x86/io_32.h b/include/asm-x86/io_32.h index 049e81e797a0..d71be8df9797 100644 --- a/include/asm-x86/io_32.h +++ b/include/asm-x86/io_32.h @@ -149,55 +149,6 @@ extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys); #define virt_to_bus virt_to_phys #define bus_to_virt phys_to_virt -/* - * readX/writeX() are used to access memory mapped devices. On some - * architectures the memory mapped IO stuff needs to be accessed - * differently. On the x86 architecture, we just read/write the - * memory location directly. - */ - -static inline unsigned char readb(const volatile void __iomem *addr) -{ - return *(volatile unsigned char __force *)addr; -} - -static inline unsigned short readw(const volatile void __iomem *addr) -{ - return *(volatile unsigned short __force *)addr; -} - -static inline unsigned int readl(const volatile void __iomem *addr) -{ - return *(volatile unsigned int __force *) addr; -} - -#define readb_relaxed(addr) readb(addr) -#define readw_relaxed(addr) readw(addr) -#define readl_relaxed(addr) readl(addr) -#define __raw_readb readb -#define __raw_readw readw -#define __raw_readl readl - -static inline void writeb(unsigned char b, volatile void __iomem *addr) -{ - *(volatile unsigned char __force *)addr = b; -} - -static inline void writew(unsigned short b, volatile void __iomem *addr) -{ - *(volatile unsigned short __force *)addr = b; -} - -static inline void writel(unsigned int b, volatile void __iomem *addr) -{ - *(volatile unsigned int __force *)addr = b; -} -#define __raw_writeb writeb -#define __raw_writew writew -#define __raw_writel writel - -#define mmiowb() - static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count) { diff --git a/include/asm-x86/io_64.h b/include/asm-x86/io_64.h index 0930bedf9e4d..ddd8058a5026 100644 --- a/include/asm-x86/io_64.h +++ b/include/asm-x86/io_64.h @@ -204,77 +204,6 @@ extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys); #define virt_to_bus virt_to_phys #define bus_to_virt phys_to_virt -/* - * readX/writeX() are used to access memory mapped devices. On some - * architectures the memory mapped IO stuff needs to be accessed - * differently. On the x86 architecture, we just read/write the - * memory location directly. - */ - -static inline __u8 __readb(const volatile void __iomem *addr) -{ - return *(__force volatile __u8 *)addr; -} - -static inline __u16 __readw(const volatile void __iomem *addr) -{ - return *(__force volatile __u16 *)addr; -} - -static __always_inline __u32 __readl(const volatile void __iomem *addr) -{ - return *(__force volatile __u32 *)addr; -} - -static inline __u64 __readq(const volatile void __iomem *addr) -{ - return *(__force volatile __u64 *)addr; -} - -#define readb(x) __readb(x) -#define readw(x) __readw(x) -#define readl(x) __readl(x) -#define readq(x) __readq(x) -#define readb_relaxed(a) readb(a) -#define readw_relaxed(a) readw(a) -#define readl_relaxed(a) readl(a) -#define readq_relaxed(a) readq(a) -#define __raw_readb readb -#define __raw_readw readw -#define __raw_readl readl -#define __raw_readq readq - -#define mmiowb() - -static inline void __writel(__u32 b, volatile void __iomem *addr) -{ - *(__force volatile __u32 *)addr = b; -} - -static inline void __writeq(__u64 b, volatile void __iomem *addr) -{ - *(__force volatile __u64 *)addr = b; -} - -static inline void __writeb(__u8 b, volatile void __iomem *addr) -{ - *(__force volatile __u8 *)addr = b; -} - -static inline void __writew(__u16 b, volatile void __iomem *addr) -{ - *(__force volatile __u16 *)addr = b; -} - -#define writeq(val, addr) __writeq((val), (addr)) -#define writel(val, addr) __writel((val), (addr)) -#define writew(val, addr) __writew((val), (addr)) -#define writeb(val, addr) __writeb((val), (addr)) -#define __raw_writeb writeb -#define __raw_writew writew -#define __raw_writel writel -#define __raw_writeq writeq - void __memcpy_fromio(void *, unsigned long, unsigned); void __memcpy_toio(unsigned long, const void *, unsigned); From 83bea8e1fa0c47b30664b6f92397c016c22f77fb Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Tue, 27 May 2008 21:03:46 +0200 Subject: [PATCH 224/821] x86: fix incomplete include guard in include/asm-x86/seccomp_32.h Signed-off-by: Vegard Nossum Signed-off-by: Ingo Molnar --- include/asm-x86/seccomp_32.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/asm-x86/seccomp_32.h b/include/asm-x86/seccomp_32.h index 18da19e89bff..36e71c5f306f 100644 --- a/include/asm-x86/seccomp_32.h +++ b/include/asm-x86/seccomp_32.h @@ -1,4 +1,5 @@ #ifndef _ASM_SECCOMP_H +#define _ASM_SECCOMP_H #include From 6330a30a76c1e62d4b4ec238368957f8febf9113 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Wed, 28 May 2008 09:46:19 +0200 Subject: [PATCH 225/821] x86: break mutual header inclusion This breaks up the mutual inclusion between headers ptrace.h and vm86.h by moving some small part of vm86.h which is needed by ptrace.h into processor-flags.h. We also try to move #include lines to the top. This has been compile tested on x86_32 and x86_64 defconfig, and run through 'make headers_check'. Cc: Adrian Bunk Signed-off-by: Vegard Nossum Signed-off-by: Ingo Molnar --- include/asm-x86/processor-flags.h | 6 ++++++ include/asm-x86/ptrace.h | 8 +++++--- include/asm-x86/vm86.h | 8 +------- 3 files changed, 12 insertions(+), 10 deletions(-) diff --git a/include/asm-x86/processor-flags.h b/include/asm-x86/processor-flags.h index 199cab107d85..092b39b3a7e6 100644 --- a/include/asm-x86/processor-flags.h +++ b/include/asm-x86/processor-flags.h @@ -88,4 +88,10 @@ #define CX86_ARR_BASE 0xc4 #define CX86_RCR_BASE 0xdc +#ifdef CONFIG_VM86 +#define X86_VM_MASK X86_EFLAGS_VM +#else +#define X86_VM_MASK 0 /* No VM86 support */ +#endif + #endif /* __ASM_I386_PROCESSOR_FLAGS_H */ diff --git a/include/asm-x86/ptrace.h b/include/asm-x86/ptrace.h index 9f922b0b95d6..8a71db803da6 100644 --- a/include/asm-x86/ptrace.h +++ b/include/asm-x86/ptrace.h @@ -3,7 +3,12 @@ #include /* For __user */ #include +#include +#ifdef __KERNEL__ +#include /* the DS BTS struct is used for ptrace too */ +#include +#endif #ifndef __ASSEMBLY__ @@ -55,9 +60,6 @@ struct pt_regs { unsigned long ss; }; -#include -#include - #endif /* __KERNEL__ */ #else /* __i386__ */ diff --git a/include/asm-x86/vm86.h b/include/asm-x86/vm86.h index cbf4a0effa75..5ce351325e01 100644 --- a/include/asm-x86/vm86.h +++ b/include/asm-x86/vm86.h @@ -115,7 +115,6 @@ struct vm86plus_info_struct { unsigned long is_vm86pus:1; /* for vm86 internal use */ unsigned char vm86dbg_intxxtab[32]; /* for debugger */ }; - struct vm86plus_struct { struct vm86_regs regs; unsigned long flags; @@ -128,11 +127,7 @@ struct vm86plus_struct { #ifdef __KERNEL__ -#ifdef CONFIG_VM86 -#define X86_VM_MASK X86_EFLAGS_VM -#else -#define X86_VM_MASK 0 /* No VM86 support */ -#endif +#include /* * This is the (kernel) stack-layout when we have done a "SAVE_ALL" from vm86 @@ -142,7 +137,6 @@ struct vm86plus_struct { * at the end of the structure. Look at ptrace.h to see the "normal" * setup. For user space layout see 'struct vm86_regs' above. */ -#include struct kernel_vm86_regs { /* From fb093eab6d8963a085f112773284f2bcb3d7907b Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 27 May 2008 16:29:20 -0700 Subject: [PATCH 226/821] x86: remove duplicated e820 func in setup.h we already have them in e820.h Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- include/asm-x86/setup.h | 6 ------ 1 file changed, 6 deletions(-) diff --git a/include/asm-x86/setup.h b/include/asm-x86/setup.h index 64f5f0c11d66..9e163fc3e984 100644 --- a/include/asm-x86/setup.h +++ b/include/asm-x86/setup.h @@ -50,15 +50,9 @@ extern struct boot_params boot_params; */ #define LOWMEMSIZE() (0x9f000) -struct e820entry; - char * __init machine_specific_memory_setup(void); char *memory_setup(void); -int __init copy_e820_map(struct e820entry *biosmap, int nr_map); -void __init add_memory_region(unsigned long long start, - unsigned long long size, int type); - void __init i386_start_kernel(void); From 88ff0a474e98f869d8c321e29481f298320100d6 Mon Sep 17 00:00:00 2001 From: Hiroshi Shimamoto Date: Tue, 27 May 2008 18:49:39 -0700 Subject: [PATCH 227/821] x86: coding style fixes for nmi.c before total: 1 errors, 6 warnings, 534 lines checked after total: 0 errors, 1 warnings, 532 lines checked Signed-off-by: Hiroshi Shimamoto Signed-off-by: Ingo Molnar --- arch/x86/kernel/nmi.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c index 3671a9f3564b..bf143f191fb1 100644 --- a/arch/x86/kernel/nmi.c +++ b/arch/x86/kernel/nmi.c @@ -23,9 +23,8 @@ #include #include #include +#include -#include -#include #include #include @@ -45,13 +44,16 @@ static cpumask_t backtrace_mask = CPU_MASK_NONE; * 0: the lapic NMI watchdog is disabled, but can be enabled */ atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ -static int panic_on_timeout; +EXPORT_SYMBOL(nmi_active); unsigned int nmi_watchdog = NMI_DEFAULT; +EXPORT_SYMBOL(nmi_watchdog); + +static int panic_on_timeout; static unsigned int nmi_hz = HZ; static DEFINE_PER_CPU(short, wd_enabled); -static int endflag __initdata = 0; +static int endflag __initdata; static inline unsigned int get_nmi_count(int cpu) { @@ -404,7 +406,7 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) static DEFINE_SPINLOCK(lock); /* Serialise the printks */ spin_lock(&lock); - printk("NMI backtrace for cpu %d\n", cpu); + printk(KERN_WARNING "NMI backtrace for cpu %d\n", cpu); dump_stack(); spin_unlock(&lock); cpu_clear(cpu, backtrace_mask); @@ -529,7 +531,3 @@ void __trigger_all_cpu_backtrace(void) mdelay(1); } } - -EXPORT_SYMBOL(nmi_active); -EXPORT_SYMBOL(nmi_watchdog); - From 9f5314fb4d556d3132c784d0df47352b2830ca53 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Wed, 28 May 2008 09:51:18 -0500 Subject: [PATCH 228/821] x86, uv: update macros used by UV platform Update the UV address macros to better describe the fields of UV physical addresses. Improve comments in the header files. Add additional MMR definitions. Signed-off-by: Jack Steiner Signed-off-by: Ingo Molnar --- arch/x86/kernel/genx2apic_uv_x.c | 141 ++++++--- include/asm-x86/uv/uv_hub.h | 188 ++++++++---- include/asm-x86/uv/uv_mmrs.h | 509 ++++++++++++++++++++++++++++++- 3 files changed, 731 insertions(+), 107 deletions(-) diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c index ebf13908a743..45e84acca8a9 100644 --- a/arch/x86/kernel/genx2apic_uv_x.c +++ b/arch/x86/kernel/genx2apic_uv_x.c @@ -5,7 +5,7 @@ * * SGI UV APIC functions (note: not an Intel compatible APIC) * - * Copyright (C) 2007 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved. */ #include @@ -55,37 +55,37 @@ static cpumask_t uv_vector_allocation_domain(int cpu) int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip) { unsigned long val; - int nasid; + int pnode; - nasid = uv_apicid_to_nasid(phys_apicid); + pnode = uv_apicid_to_pnode(phys_apicid); val = (1UL << UVH_IPI_INT_SEND_SHFT) | (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) | (((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) | APIC_DM_INIT; - uv_write_global_mmr64(nasid, UVH_IPI_INT, val); + uv_write_global_mmr64(pnode, UVH_IPI_INT, val); mdelay(10); val = (1UL << UVH_IPI_INT_SEND_SHFT) | (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) | (((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) | APIC_DM_STARTUP; - uv_write_global_mmr64(nasid, UVH_IPI_INT, val); + uv_write_global_mmr64(pnode, UVH_IPI_INT, val); return 0; } static void uv_send_IPI_one(int cpu, int vector) { unsigned long val, apicid, lapicid; - int nasid; + int pnode; apicid = per_cpu(x86_cpu_to_apicid, cpu); /* ZZZ - cache node-local ? */ lapicid = apicid & 0x3f; /* ZZZ macro needed */ - nasid = uv_apicid_to_nasid(apicid); + pnode = uv_apicid_to_pnode(apicid); val = (1UL << UVH_IPI_INT_SEND_SHFT) | (lapicid << UVH_IPI_INT_APIC_ID_SHFT) | (vector << UVH_IPI_INT_VECTOR_SHFT); - uv_write_global_mmr64(nasid, UVH_IPI_INT, val); + uv_write_global_mmr64(pnode, UVH_IPI_INT, val); } static void uv_send_IPI_mask(cpumask_t mask, int vector) @@ -159,39 +159,81 @@ struct genapic apic_x2apic_uv_x = { .phys_pkg_id = phys_pkg_id, /* Fixme ZZZ */ }; -static __cpuinit void set_x2apic_extra_bits(int nasid) +static __cpuinit void set_x2apic_extra_bits(int pnode) { - __get_cpu_var(x2apic_extra_bits) = ((nasid >> 1) << 6); + __get_cpu_var(x2apic_extra_bits) = (pnode << 6); } /* * Called on boot cpu. */ +static __init int boot_pnode_to_blade(int pnode) +{ + int blade; + + for (blade = 0; blade < uv_num_possible_blades(); blade++) + if (pnode == uv_blade_info[blade].pnode) + return blade; + BUG(); +} + +struct redir_addr { + unsigned long redirect; + unsigned long alias; +}; + +#define DEST_SHIFT UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT + +static __initdata struct redir_addr redir_addrs[] = { + {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_SI_ALIAS0_OVERLAY_CONFIG}, + {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_SI_ALIAS1_OVERLAY_CONFIG}, + {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_SI_ALIAS2_OVERLAY_CONFIG}, +}; + +static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size) +{ + union uvh_si_alias0_overlay_config_u alias; + union uvh_rh_gam_alias210_redirect_config_2_mmr_u redirect; + int i; + + for (i = 0; i < ARRAY_SIZE(redir_addrs); i++) { + alias.v = uv_read_local_mmr(redir_addrs[i].alias); + if (alias.s.base == 0) { + *size = (1UL << alias.s.m_alias); + redirect.v = uv_read_local_mmr(redir_addrs[i].redirect); + *base = (unsigned long)redirect.s.dest_base << DEST_SHIFT; + return; + } + } + BUG(); +} + static __init void uv_system_init(void) { union uvh_si_addr_map_config_u m_n_config; - int bytes, nid, cpu, lcpu, nasid, last_nasid, blade; - unsigned long mmr_base; + union uvh_node_id_u node_id; + unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size; + int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val; + unsigned long mmr_base, present; m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG); + m_val = m_n_config.s.m_skt; + n_val = m_n_config.s.n_skt; mmr_base = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) & ~UV_MMR_ENABLE; printk(KERN_DEBUG "UV: global MMR base 0x%lx\n", mmr_base); - last_nasid = -1; - for_each_possible_cpu(cpu) { - nid = cpu_to_node(cpu); - nasid = uv_apicid_to_nasid(per_cpu(x86_cpu_to_apicid, cpu)); - if (nasid != last_nasid) - uv_possible_blades++; - last_nasid = nasid; - } + for(i = 0; i < UVH_NODE_PRESENT_TABLE_DEPTH; i++) + uv_possible_blades += + hweight64(uv_read_local_mmr( UVH_NODE_PRESENT_TABLE + i * 8)); printk(KERN_DEBUG "UV: Found %d blades\n", uv_num_possible_blades()); bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades(); uv_blade_info = alloc_bootmem_pages(bytes); + get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size); + bytes = sizeof(uv_node_to_blade[0]) * num_possible_nodes(); uv_node_to_blade = alloc_bootmem_pages(bytes); memset(uv_node_to_blade, 255, bytes); @@ -200,43 +242,56 @@ static __init void uv_system_init(void) uv_cpu_to_blade = alloc_bootmem_pages(bytes); memset(uv_cpu_to_blade, 255, bytes); - last_nasid = -1; - blade = -1; - lcpu = -1; - for_each_possible_cpu(cpu) { - nid = cpu_to_node(cpu); - nasid = uv_apicid_to_nasid(per_cpu(x86_cpu_to_apicid, cpu)); - if (nasid != last_nasid) { - blade++; - lcpu = -1; - uv_blade_info[blade].nr_posible_cpus = 0; + blade = 0; + for (i = 0; i < UVH_NODE_PRESENT_TABLE_DEPTH; i++) { + present = uv_read_local_mmr(UVH_NODE_PRESENT_TABLE + i * 8); + for (j = 0; j < 64; j++) { + if (!test_bit(j, &present)) + continue; + uv_blade_info[blade].pnode = (i * 64 + j); + uv_blade_info[blade].nr_possible_cpus = 0; uv_blade_info[blade].nr_online_cpus = 0; + blade++; } - last_nasid = nasid; - lcpu++; + } - uv_cpu_hub_info(cpu)->m_val = m_n_config.s.m_skt; - uv_cpu_hub_info(cpu)->n_val = m_n_config.s.n_skt; + node_id.v = uv_read_local_mmr(UVH_NODE_ID); + gnode_upper = (((unsigned long)node_id.s.node_id) & + ~((1 << n_val) - 1)) << m_val; + + for_each_present_cpu(cpu) { + nid = cpu_to_node(cpu); + pnode = uv_apicid_to_pnode(per_cpu(x86_cpu_to_apicid, cpu)); + blade = boot_pnode_to_blade(pnode); + lcpu = uv_blade_info[blade].nr_possible_cpus; + uv_blade_info[blade].nr_possible_cpus++; + + uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base; + uv_cpu_hub_info(cpu)->lowmem_remap_top = + lowmem_redir_base + lowmem_redir_size; + uv_cpu_hub_info(cpu)->m_val = m_val; + uv_cpu_hub_info(cpu)->n_val = m_val; uv_cpu_hub_info(cpu)->numa_blade_id = blade; uv_cpu_hub_info(cpu)->blade_processor_id = lcpu; - uv_cpu_hub_info(cpu)->local_nasid = nasid; - uv_cpu_hub_info(cpu)->gnode_upper = - nasid & ~((1 << uv_hub_info->n_val) - 1); + uv_cpu_hub_info(cpu)->pnode = pnode; + uv_cpu_hub_info(cpu)->pnode_mask = (1 << n_val) - 1; + uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1; + uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper; uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base; uv_cpu_hub_info(cpu)->coherency_domain_number = 0;/* ZZZ */ - uv_blade_info[blade].nasid = nasid; - uv_blade_info[blade].nr_posible_cpus++; uv_node_to_blade[nid] = blade; uv_cpu_to_blade[cpu] = blade; - printk(KERN_DEBUG "UV cpu %d, apicid 0x%x, nasid %d, nid %d\n", - cpu, per_cpu(x86_cpu_to_apicid, cpu), nasid, nid); - printk(KERN_DEBUG "UV lcpu %d, blade %d\n", lcpu, blade); + printk(KERN_DEBUG "UV cpu %d, apicid 0x%x, pnode %d, nid %d, " + "lcpu %d, blade %d\n", + cpu, per_cpu(x86_cpu_to_apicid, cpu), pnode, nid, + lcpu, blade); } } /* * Called on each cpu to initialize the per_cpu UV data area. + * ZZZ hotplug not supported yet */ void __cpuinit uv_cpu_init(void) { @@ -246,5 +301,5 @@ void __cpuinit uv_cpu_init(void) uv_blade_info[uv_numa_blade_id()].nr_online_cpus++; if (get_uv_system_type() == UV_NON_UNIQUE_APIC) - set_x2apic_extra_bits(uv_hub_info->local_nasid); + set_x2apic_extra_bits(uv_hub_info->pnode); } diff --git a/include/asm-x86/uv/uv_hub.h b/include/asm-x86/uv/uv_hub.h index 26b9240d1e23..65004881de5f 100644 --- a/include/asm-x86/uv/uv_hub.h +++ b/include/asm-x86/uv/uv_hub.h @@ -5,7 +5,7 @@ * * SGI UV architectural definitions * - * Copyright (C) 2007 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved. */ #ifndef __ASM_X86_UV_HUB_H__ @@ -20,26 +20,49 @@ /* * Addressing Terminology * - * NASID - network ID of a router, Mbrick or Cbrick. Nasid values of - * routers always have low bit of 1, C/MBricks have low bit - * equal to 0. Most addressing macros that target UV hub chips - * right shift the NASID by 1 to exclude the always-zero bit. + * M - The low M bits of a physical address represent the offset + * into the blade local memory. RAM memory on a blade is physically + * contiguous (although various IO spaces may punch holes in + * it).. * - * SNASID - NASID right shifted by 1 bit. + * N - Number of bits in the node portion of a socket physical + * address. + * + * NASID - network ID of a router, Mbrick or Cbrick. Nasid values of + * routers always have low bit of 1, C/MBricks have low bit + * equal to 0. Most addressing macros that target UV hub chips + * right shift the NASID by 1 to exclude the always-zero bit. + * NASIDs contain up to 15 bits. + * + * GNODE - NASID right shifted by 1 bit. Most mmrs contain gnodes instead + * of nasids. + * + * PNODE - the low N bits of the GNODE. The PNODE is the most useful variant + * of the nasid for socket usage. + * + * + * NumaLink Global Physical Address Format: + * +--------------------------------+---------------------+ + * |00..000| GNODE | NodeOffset | + * +--------------------------------+---------------------+ + * |<-------53 - M bits --->|<--------M bits -----> + * + * M - number of node offset bits (35 .. 40) * * * Memory/UV-HUB Processor Socket Address Format: - * +--------+---------------+---------------------+ - * |00..0000| SNASID | NodeOffset | - * +--------+---------------+---------------------+ - * <--- N bits --->|<--------M bits -----> + * +----------------+---------------+---------------------+ + * |00..000000000000| PNODE | NodeOffset | + * +----------------+---------------+---------------------+ + * <--- N bits --->|<--------M bits -----> * - * M number of node offset bits (35 .. 40) - * N number of SNASID bits (0 .. 10) + * M - number of node offset bits (35 .. 40) + * N - number of PNODE bits (0 .. 10) * * Note: M + N cannot currently exceed 44 (x86_64) or 46 (IA64). * The actual values are configuration dependent and are set at - * boot time + * boot time. M & N values are set by the hardware/BIOS at boot. + * * * APICID format * NOTE!!!!!! This is the current format of the APICID. However, code @@ -48,14 +71,14 @@ * * 1111110000000000 * 5432109876543210 - * nnnnnnnnnnlc0cch + * pppppppppplc0cch * sssssssssss * - * n = snasid bits + * p = pnode bits * l = socket number on board * c = core * h = hyperthread - * s = bits that are in the socket CSR + * s = bits that are in the SOCKET_ID CSR * * Note: Processor only supports 12 bits in the APICID register. The ACPI * tables hold all 16 bits. Software needs to be aware of this. @@ -74,7 +97,7 @@ * This value is also the value of the maximum number of non-router NASIDs * in the numalink fabric. * - * NOTE: a brick may be 1 or 2 OS nodes. Don't get these confused. + * NOTE: a brick may contain 1 or 2 OS nodes. Don't get these confused. */ #define UV_MAX_NUMALINK_BLADES 16384 @@ -96,8 +119,12 @@ */ struct uv_hub_info_s { unsigned long global_mmr_base; - unsigned short local_nasid; - unsigned short gnode_upper; + unsigned long gpa_mask; + unsigned long gnode_upper; + unsigned long lowmem_remap_top; + unsigned long lowmem_remap_base; + unsigned short pnode; + unsigned short pnode_mask; unsigned short coherency_domain_number; unsigned short numa_blade_id; unsigned char blade_processor_id; @@ -112,83 +139,124 @@ DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info); * Local & Global MMR space macros. * Note: macros are intended to be used ONLY by inline functions * in this file - not by other kernel code. + * n - NASID (full 15-bit global nasid) + * g - GNODE (full 15-bit global nasid, right shifted 1) + * p - PNODE (local part of nsids, right shifted 1) */ -#define UV_SNASID(n) ((n) >> 1) -#define UV_NASID(n) ((n) << 1) +#define UV_NASID_TO_PNODE(n) (((n) >> 1) & uv_hub_info->pnode_mask) +#define UV_PNODE_TO_NASID(p) (((p) << 1) | uv_hub_info->gnode_upper) #define UV_LOCAL_MMR_BASE 0xf4000000UL #define UV_GLOBAL_MMR32_BASE 0xf8000000UL #define UV_GLOBAL_MMR64_BASE (uv_hub_info->global_mmr_base) -#define UV_GLOBAL_MMR32_SNASID_MASK 0x3ff -#define UV_GLOBAL_MMR32_SNASID_SHIFT 15 -#define UV_GLOBAL_MMR64_SNASID_SHIFT 26 +#define UV_GLOBAL_MMR32_PNODE_SHIFT 15 +#define UV_GLOBAL_MMR64_PNODE_SHIFT 26 -#define UV_GLOBAL_MMR32_NASID_BITS(n) \ - (((UV_SNASID(n) & UV_GLOBAL_MMR32_SNASID_MASK)) << \ - (UV_GLOBAL_MMR32_SNASID_SHIFT)) +#define UV_GLOBAL_MMR32_PNODE_BITS(p) ((p) << (UV_GLOBAL_MMR32_PNODE_SHIFT)) -#define UV_GLOBAL_MMR64_NASID_BITS(n) \ - ((unsigned long)UV_SNASID(n) << UV_GLOBAL_MMR64_SNASID_SHIFT) +#define UV_GLOBAL_MMR64_PNODE_BITS(p) \ + ((unsigned long)(p) << UV_GLOBAL_MMR64_PNODE_SHIFT) -#define UV_APIC_NASID_SHIFT 6 +#define UV_APIC_PNODE_SHIFT 6 /* - * Extract a NASID from an APICID (full apicid, not processor subset) + * Macros for converting between kernel virtual addresses, socket local physical + * addresses, and UV global physical addresses. + * Note: use the standard __pa() & __va() macros for converting + * between socket virtual and socket physical addresses. */ -static inline int uv_apicid_to_nasid(int apicid) + +/* socket phys RAM --> UV global physical address */ +static inline unsigned long uv_soc_phys_ram_to_gpa(unsigned long paddr) { - return (UV_NASID(apicid >> UV_APIC_NASID_SHIFT)); + if (paddr < uv_hub_info->lowmem_remap_top) + paddr += uv_hub_info->lowmem_remap_base; + return paddr | uv_hub_info->gnode_upper; +} + + +/* socket virtual --> UV global physical address */ +static inline unsigned long uv_gpa(void *v) +{ + return __pa(v) | uv_hub_info->gnode_upper; +} + +/* socket virtual --> UV global physical address */ +static inline void *uv_vgpa(void *v) +{ + return (void *)uv_gpa(v); +} + +/* UV global physical address --> socket virtual */ +static inline void *uv_va(unsigned long gpa) +{ + return __va(gpa & uv_hub_info->gpa_mask); +} + +/* pnode, offset --> socket virtual */ +static inline void *uv_pnode_offset_to_vaddr(int pnode, unsigned long offset) +{ + return __va(((unsigned long)pnode << uv_hub_info->m_val) | offset); +} + + +/* + * Extract a PNODE from an APICID (full apicid, not processor subset) + */ +static inline int uv_apicid_to_pnode(int apicid) +{ + return (apicid >> UV_APIC_PNODE_SHIFT); } /* * Access global MMRs using the low memory MMR32 space. This region supports * faster MMR access but not all MMRs are accessible in this space. */ -static inline unsigned long *uv_global_mmr32_address(int nasid, +static inline unsigned long *uv_global_mmr32_address(int pnode, unsigned long offset) { return __va(UV_GLOBAL_MMR32_BASE | - UV_GLOBAL_MMR32_NASID_BITS(nasid) | offset); + UV_GLOBAL_MMR32_PNODE_BITS(pnode) | offset); } -static inline void uv_write_global_mmr32(int nasid, unsigned long offset, +static inline void uv_write_global_mmr32(int pnode, unsigned long offset, unsigned long val) { - *uv_global_mmr32_address(nasid, offset) = val; + *uv_global_mmr32_address(pnode, offset) = val; } -static inline unsigned long uv_read_global_mmr32(int nasid, +static inline unsigned long uv_read_global_mmr32(int pnode, unsigned long offset) { - return *uv_global_mmr32_address(nasid, offset); + return *uv_global_mmr32_address(pnode, offset); } /* * Access Global MMR space using the MMR space located at the top of physical * memory. */ -static inline unsigned long *uv_global_mmr64_address(int nasid, +static inline unsigned long *uv_global_mmr64_address(int pnode, unsigned long offset) { return __va(UV_GLOBAL_MMR64_BASE | - UV_GLOBAL_MMR64_NASID_BITS(nasid) | offset); + UV_GLOBAL_MMR64_PNODE_BITS(pnode) | offset); } -static inline void uv_write_global_mmr64(int nasid, unsigned long offset, +static inline void uv_write_global_mmr64(int pnode, unsigned long offset, unsigned long val) { - *uv_global_mmr64_address(nasid, offset) = val; + *uv_global_mmr64_address(pnode, offset) = val; } -static inline unsigned long uv_read_global_mmr64(int nasid, +static inline unsigned long uv_read_global_mmr64(int pnode, unsigned long offset) { - return *uv_global_mmr64_address(nasid, offset); + return *uv_global_mmr64_address(pnode, offset); } /* - * Access node local MMRs. Faster than using global space but only local MMRs + * Access hub local MMRs. Faster than using global space but only local MMRs * are accessible. */ static inline unsigned long *uv_local_mmr_address(unsigned long offset) @@ -207,15 +275,15 @@ static inline void uv_write_local_mmr(unsigned long offset, unsigned long val) } /* - * Structures and definitions for converting between cpu, node, and blade + * Structures and definitions for converting between cpu, node, pnode, and blade * numbers. */ struct uv_blade_info { - unsigned short nr_posible_cpus; + unsigned short nr_possible_cpus; unsigned short nr_online_cpus; - unsigned short nasid; + unsigned short pnode; }; -struct uv_blade_info *uv_blade_info; +extern struct uv_blade_info *uv_blade_info; extern short *uv_node_to_blade; extern short *uv_cpu_to_blade; extern short uv_possible_blades; @@ -244,16 +312,16 @@ static inline int uv_node_to_blade_id(int nid) return uv_node_to_blade[nid]; } -/* Convert a blade id to the NASID of the blade */ -static inline int uv_blade_to_nasid(int bid) +/* Convert a blade id to the PNODE of the blade */ +static inline int uv_blade_to_pnode(int bid) { - return uv_blade_info[bid].nasid; + return uv_blade_info[bid].pnode; } /* Determine the number of possible cpus on a blade */ static inline int uv_blade_nr_possible_cpus(int bid) { - return uv_blade_info[bid].nr_posible_cpus; + return uv_blade_info[bid].nr_possible_cpus; } /* Determine the number of online cpus on a blade */ @@ -262,16 +330,16 @@ static inline int uv_blade_nr_online_cpus(int bid) return uv_blade_info[bid].nr_online_cpus; } -/* Convert a cpu id to the NASID of the blade containing the cpu */ -static inline int uv_cpu_to_nasid(int cpu) +/* Convert a cpu id to the PNODE of the blade containing the cpu */ +static inline int uv_cpu_to_pnode(int cpu) { - return uv_blade_info[uv_cpu_to_blade_id(cpu)].nasid; + return uv_blade_info[uv_cpu_to_blade_id(cpu)].pnode; } -/* Convert a node number to the NASID of the blade */ -static inline int uv_node_to_nasid(int nid) +/* Convert a linux node number to the PNODE of the blade */ +static inline int uv_node_to_pnode(int nid) { - return uv_blade_info[uv_node_to_blade_id(nid)].nasid; + return uv_blade_info[uv_node_to_blade_id(nid)].pnode; } /* Maximum possible number of blades */ diff --git a/include/asm-x86/uv/uv_mmrs.h b/include/asm-x86/uv/uv_mmrs.h index 3b69fe6b6376..ac9846076521 100644 --- a/include/asm-x86/uv/uv_mmrs.h +++ b/include/asm-x86/uv/uv_mmrs.h @@ -11,11 +11,46 @@ #ifndef __ASM_X86_UV_MMRS__ #define __ASM_X86_UV_MMRS__ -/* - * AUTO GENERATED - Do not edit - */ +#define UV_MMR_ENABLE (1UL << 63) - #define UV_MMR_ENABLE (1UL << 63) +/* ========================================================================= */ +/* UVH_BAU_DATA_CONFIG */ +/* ========================================================================= */ +#define UVH_BAU_DATA_CONFIG 0x61680UL +#define UVH_BAU_DATA_CONFIG_32 0x0450 + +#define UVH_BAU_DATA_CONFIG_VECTOR_SHFT 0 +#define UVH_BAU_DATA_CONFIG_VECTOR_MASK 0x00000000000000ffUL +#define UVH_BAU_DATA_CONFIG_DM_SHFT 8 +#define UVH_BAU_DATA_CONFIG_DM_MASK 0x0000000000000700UL +#define UVH_BAU_DATA_CONFIG_DESTMODE_SHFT 11 +#define UVH_BAU_DATA_CONFIG_DESTMODE_MASK 0x0000000000000800UL +#define UVH_BAU_DATA_CONFIG_STATUS_SHFT 12 +#define UVH_BAU_DATA_CONFIG_STATUS_MASK 0x0000000000001000UL +#define UVH_BAU_DATA_CONFIG_P_SHFT 13 +#define UVH_BAU_DATA_CONFIG_P_MASK 0x0000000000002000UL +#define UVH_BAU_DATA_CONFIG_T_SHFT 15 +#define UVH_BAU_DATA_CONFIG_T_MASK 0x0000000000008000UL +#define UVH_BAU_DATA_CONFIG_M_SHFT 16 +#define UVH_BAU_DATA_CONFIG_M_MASK 0x0000000000010000UL +#define UVH_BAU_DATA_CONFIG_APIC_ID_SHFT 32 +#define UVH_BAU_DATA_CONFIG_APIC_ID_MASK 0xffffffff00000000UL + +union uvh_bau_data_config_u { + unsigned long v; + struct uvh_bau_data_config_s { + unsigned long vector_ : 8; /* RW */ + unsigned long dm : 3; /* RW */ + unsigned long destmode : 1; /* RW */ + unsigned long status : 1; /* RO */ + unsigned long p : 1; /* RO */ + unsigned long rsvd_14 : 1; /* */ + unsigned long t : 1; /* RO */ + unsigned long m : 1; /* RW */ + unsigned long rsvd_17_31: 15; /* */ + unsigned long apic_id : 32; /* RW */ + } s; +}; /* ========================================================================= */ /* UVH_IPI_INT */ @@ -109,6 +144,7 @@ union uvh_lb_bau_intd_payload_queue_tail_u { /* UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE */ /* ========================================================================= */ #define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE 0x320080UL +#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_32 0x0aa0 #define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_0_SHFT 0 #define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_0_MASK 0x0000000000000001UL @@ -169,6 +205,7 @@ union uvh_lb_bau_intd_software_acknowledge_u { /* UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS */ /* ========================================================================= */ #define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS 0x0000000000320088UL +#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS_32 0x0aa8 /* ========================================================================= */ /* UVH_LB_BAU_SB_ACTIVATION_CONTROL */ @@ -247,6 +284,331 @@ union uvh_lb_bau_sb_descriptor_base_u { } s; }; +/* ========================================================================= */ +/* UVH_LB_MCAST_AOERR0_RPT_ENABLE */ +/* ========================================================================= */ +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE 0x50b20UL + +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_OBESE_MSG_SHFT 0 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_OBESE_MSG_MASK 0x0000000000000001UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_DATA_SB_ERR_SHFT 1 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_DATA_SB_ERR_MASK 0x0000000000000002UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_NACK_BUFF_PARITY_SHFT 2 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_NACK_BUFF_PARITY_MASK 0x0000000000000004UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_TIMEOUT_SHFT 3 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_TIMEOUT_MASK 0x0000000000000008UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_INACTIVE_REPLY_SHFT 4 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_INACTIVE_REPLY_MASK 0x0000000000000010UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_UPGRADE_ERROR_SHFT 5 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_UPGRADE_ERROR_MASK 0x0000000000000020UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REG_COUNT_UNDERFLOW_SHFT 6 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REG_COUNT_UNDERFLOW_MASK 0x0000000000000040UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REP_OBESE_MSG_SHFT 7 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REP_OBESE_MSG_MASK 0x0000000000000080UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_RUNT_MSG_SHFT 8 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_RUNT_MSG_MASK 0x0000000000000100UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_OBESE_MSG_SHFT 9 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_OBESE_MSG_MASK 0x0000000000000200UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_DATA_SB_ERR_SHFT 10 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_DATA_SB_ERR_MASK 0x0000000000000400UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_RUNT_MSG_SHFT 11 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_RUNT_MSG_MASK 0x0000000000000800UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_OBESE_MSG_SHFT 12 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_OBESE_MSG_MASK 0x0000000000001000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_DATA_SB_ERR_SHFT 13 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_DATA_SB_ERR_MASK 0x0000000000002000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_COMMAND_ERR_SHFT 14 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_COMMAND_ERR_MASK 0x0000000000004000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_PEND_TIMEOUT_SHFT 15 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_PEND_TIMEOUT_MASK 0x0000000000008000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_RUNT_MSG_SHFT 16 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_RUNT_MSG_MASK 0x0000000000010000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_OBESE_MSG_SHFT 17 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_OBESE_MSG_MASK 0x0000000000020000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_DATA_SB_ERR_SHFT 18 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_DATA_SB_ERR_MASK 0x0000000000040000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_RUNT_MSG_SHFT 19 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_RUNT_MSG_MASK 0x0000000000080000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_OBESE_MSG_SHFT 20 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_OBESE_MSG_MASK 0x0000000000100000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_DATA_SB_ERR_SHFT 21 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_DATA_SB_ERR_MASK 0x0000000000200000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_TIMEOUT_SHFT 22 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_TIMEOUT_MASK 0x0000000000400000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_SPURIOUS_EVENT_SHFT 23 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_SPURIOUS_EVENT_MASK 0x0000000000800000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IOH_DESTINATION_TABLE_PARITY_SHFT 24 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IOH_DESTINATION_TABLE_PARITY_MASK 0x0000000001000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_HAD_ERROR_REPLY_SHFT 25 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_HAD_ERROR_REPLY_MASK 0x0000000002000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_TIMEOUT_SHFT 26 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_TIMEOUT_MASK 0x0000000004000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_LOCK_MANAGER_HAD_ERROR_REPLY_SHFT 27 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_LOCK_MANAGER_HAD_ERROR_REPLY_MASK 0x0000000008000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_HAD_ERROR_REPLY_SHFT 28 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_HAD_ERROR_REPLY_MASK 0x0000000010000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_TIMEOUT_SHFT 29 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_TIMEOUT_MASK 0x0000000020000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SB_ACTIVATION_OVERRUN_SHFT 30 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SB_ACTIVATION_OVERRUN_MASK 0x0000000040000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_HAD_ERROR_REPLY_SHFT 31 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_HAD_ERROR_REPLY_MASK 0x0000000080000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_TIMEOUT_SHFT 32 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_TIMEOUT_MASK 0x0000000100000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_0_PARITY_SHFT 33 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_0_PARITY_MASK 0x0000000200000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_1_PARITY_SHFT 34 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_1_PARITY_MASK 0x0000000400000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SOCKET_DESTINATION_TABLE_PARITY_SHFT 35 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SOCKET_DESTINATION_TABLE_PARITY_MASK 0x0000000800000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_BAU_REPLY_PAYLOAD_CORRUPTION_SHFT 36 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_BAU_REPLY_PAYLOAD_CORRUPTION_MASK 0x0000001000000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IO_PORT_DESTINATION_TABLE_PARITY_SHFT 37 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IO_PORT_DESTINATION_TABLE_PARITY_MASK 0x0000002000000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INTD_SOFT_ACK_TIMEOUT_SHFT 38 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INTD_SOFT_ACK_TIMEOUT_MASK 0x0000004000000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_OBESE_MSG_SHFT 39 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_OBESE_MSG_MASK 0x0000008000000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_COMMAND_ERR_SHFT 40 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_COMMAND_ERR_MASK 0x0000010000000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_TIMEOUT_SHFT 41 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_TIMEOUT_MASK 0x0000020000000000UL + +union uvh_lb_mcast_aoerr0_rpt_enable_u { + unsigned long v; + struct uvh_lb_mcast_aoerr0_rpt_enable_s { + unsigned long mcast_obese_msg : 1; /* RW */ + unsigned long mcast_data_sb_err : 1; /* RW */ + unsigned long mcast_nack_buff_parity : 1; /* RW */ + unsigned long mcast_timeout : 1; /* RW */ + unsigned long mcast_inactive_reply : 1; /* RW */ + unsigned long mcast_upgrade_error : 1; /* RW */ + unsigned long mcast_reg_count_underflow : 1; /* RW */ + unsigned long mcast_rep_obese_msg : 1; /* RW */ + unsigned long ucache_req_runt_msg : 1; /* RW */ + unsigned long ucache_req_obese_msg : 1; /* RW */ + unsigned long ucache_req_data_sb_err : 1; /* RW */ + unsigned long ucache_rep_runt_msg : 1; /* RW */ + unsigned long ucache_rep_obese_msg : 1; /* RW */ + unsigned long ucache_rep_data_sb_err : 1; /* RW */ + unsigned long ucache_rep_command_err : 1; /* RW */ + unsigned long ucache_pend_timeout : 1; /* RW */ + unsigned long macc_req_runt_msg : 1; /* RW */ + unsigned long macc_req_obese_msg : 1; /* RW */ + unsigned long macc_req_data_sb_err : 1; /* RW */ + unsigned long macc_rep_runt_msg : 1; /* RW */ + unsigned long macc_rep_obese_msg : 1; /* RW */ + unsigned long macc_rep_data_sb_err : 1; /* RW */ + unsigned long macc_timeout : 1; /* RW */ + unsigned long macc_spurious_event : 1; /* RW */ + unsigned long ioh_destination_table_parity : 1; /* RW */ + unsigned long get_had_error_reply : 1; /* RW */ + unsigned long get_timeout : 1; /* RW */ + unsigned long lock_manager_had_error_reply : 1; /* RW */ + unsigned long put_had_error_reply : 1; /* RW */ + unsigned long put_timeout : 1; /* RW */ + unsigned long sb_activation_overrun : 1; /* RW */ + unsigned long completed_gb_activation_had_error_reply : 1; /* RW */ + unsigned long completed_gb_activation_timeout : 1; /* RW */ + unsigned long descriptor_buffer_0_parity : 1; /* RW */ + unsigned long descriptor_buffer_1_parity : 1; /* RW */ + unsigned long socket_destination_table_parity : 1; /* RW */ + unsigned long bau_reply_payload_corruption : 1; /* RW */ + unsigned long io_port_destination_table_parity : 1; /* RW */ + unsigned long intd_soft_ack_timeout : 1; /* RW */ + unsigned long int_rep_obese_msg : 1; /* RW */ + unsigned long int_rep_command_err : 1; /* RW */ + unsigned long int_timeout : 1; /* RW */ + unsigned long rsvd_42_63 : 22; /* */ + } s; +}; + +/* ========================================================================= */ +/* UVH_LOCAL_INT0_CONFIG */ +/* ========================================================================= */ +#define UVH_LOCAL_INT0_CONFIG 0x61000UL + +#define UVH_LOCAL_INT0_CONFIG_VECTOR_SHFT 0 +#define UVH_LOCAL_INT0_CONFIG_VECTOR_MASK 0x00000000000000ffUL +#define UVH_LOCAL_INT0_CONFIG_DM_SHFT 8 +#define UVH_LOCAL_INT0_CONFIG_DM_MASK 0x0000000000000700UL +#define UVH_LOCAL_INT0_CONFIG_DESTMODE_SHFT 11 +#define UVH_LOCAL_INT0_CONFIG_DESTMODE_MASK 0x0000000000000800UL +#define UVH_LOCAL_INT0_CONFIG_STATUS_SHFT 12 +#define UVH_LOCAL_INT0_CONFIG_STATUS_MASK 0x0000000000001000UL +#define UVH_LOCAL_INT0_CONFIG_P_SHFT 13 +#define UVH_LOCAL_INT0_CONFIG_P_MASK 0x0000000000002000UL +#define UVH_LOCAL_INT0_CONFIG_T_SHFT 15 +#define UVH_LOCAL_INT0_CONFIG_T_MASK 0x0000000000008000UL +#define UVH_LOCAL_INT0_CONFIG_M_SHFT 16 +#define UVH_LOCAL_INT0_CONFIG_M_MASK 0x0000000000010000UL +#define UVH_LOCAL_INT0_CONFIG_APIC_ID_SHFT 32 +#define UVH_LOCAL_INT0_CONFIG_APIC_ID_MASK 0xffffffff00000000UL + +union uvh_local_int0_config_u { + unsigned long v; + struct uvh_local_int0_config_s { + unsigned long vector_ : 8; /* RW */ + unsigned long dm : 3; /* RW */ + unsigned long destmode : 1; /* RW */ + unsigned long status : 1; /* RO */ + unsigned long p : 1; /* RO */ + unsigned long rsvd_14 : 1; /* */ + unsigned long t : 1; /* RO */ + unsigned long m : 1; /* RW */ + unsigned long rsvd_17_31: 15; /* */ + unsigned long apic_id : 32; /* RW */ + } s; +}; + +/* ========================================================================= */ +/* UVH_LOCAL_INT0_ENABLE */ +/* ========================================================================= */ +#define UVH_LOCAL_INT0_ENABLE 0x65000UL + +#define UVH_LOCAL_INT0_ENABLE_LB_HCERR_SHFT 0 +#define UVH_LOCAL_INT0_ENABLE_LB_HCERR_MASK 0x0000000000000001UL +#define UVH_LOCAL_INT0_ENABLE_GR0_HCERR_SHFT 1 +#define UVH_LOCAL_INT0_ENABLE_GR0_HCERR_MASK 0x0000000000000002UL +#define UVH_LOCAL_INT0_ENABLE_GR1_HCERR_SHFT 2 +#define UVH_LOCAL_INT0_ENABLE_GR1_HCERR_MASK 0x0000000000000004UL +#define UVH_LOCAL_INT0_ENABLE_LH_HCERR_SHFT 3 +#define UVH_LOCAL_INT0_ENABLE_LH_HCERR_MASK 0x0000000000000008UL +#define UVH_LOCAL_INT0_ENABLE_RH_HCERR_SHFT 4 +#define UVH_LOCAL_INT0_ENABLE_RH_HCERR_MASK 0x0000000000000010UL +#define UVH_LOCAL_INT0_ENABLE_XN_HCERR_SHFT 5 +#define UVH_LOCAL_INT0_ENABLE_XN_HCERR_MASK 0x0000000000000020UL +#define UVH_LOCAL_INT0_ENABLE_SI_HCERR_SHFT 6 +#define UVH_LOCAL_INT0_ENABLE_SI_HCERR_MASK 0x0000000000000040UL +#define UVH_LOCAL_INT0_ENABLE_LB_AOERR0_SHFT 7 +#define UVH_LOCAL_INT0_ENABLE_LB_AOERR0_MASK 0x0000000000000080UL +#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR0_SHFT 8 +#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR0_MASK 0x0000000000000100UL +#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR0_SHFT 9 +#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR0_MASK 0x0000000000000200UL +#define UVH_LOCAL_INT0_ENABLE_LH_AOERR0_SHFT 10 +#define UVH_LOCAL_INT0_ENABLE_LH_AOERR0_MASK 0x0000000000000400UL +#define UVH_LOCAL_INT0_ENABLE_RH_AOERR0_SHFT 11 +#define UVH_LOCAL_INT0_ENABLE_RH_AOERR0_MASK 0x0000000000000800UL +#define UVH_LOCAL_INT0_ENABLE_XN_AOERR0_SHFT 12 +#define UVH_LOCAL_INT0_ENABLE_XN_AOERR0_MASK 0x0000000000001000UL +#define UVH_LOCAL_INT0_ENABLE_SI_AOERR0_SHFT 13 +#define UVH_LOCAL_INT0_ENABLE_SI_AOERR0_MASK 0x0000000000002000UL +#define UVH_LOCAL_INT0_ENABLE_LB_AOERR1_SHFT 14 +#define UVH_LOCAL_INT0_ENABLE_LB_AOERR1_MASK 0x0000000000004000UL +#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR1_SHFT 15 +#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR1_MASK 0x0000000000008000UL +#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR1_SHFT 16 +#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR1_MASK 0x0000000000010000UL +#define UVH_LOCAL_INT0_ENABLE_LH_AOERR1_SHFT 17 +#define UVH_LOCAL_INT0_ENABLE_LH_AOERR1_MASK 0x0000000000020000UL +#define UVH_LOCAL_INT0_ENABLE_RH_AOERR1_SHFT 18 +#define UVH_LOCAL_INT0_ENABLE_RH_AOERR1_MASK 0x0000000000040000UL +#define UVH_LOCAL_INT0_ENABLE_XN_AOERR1_SHFT 19 +#define UVH_LOCAL_INT0_ENABLE_XN_AOERR1_MASK 0x0000000000080000UL +#define UVH_LOCAL_INT0_ENABLE_SI_AOERR1_SHFT 20 +#define UVH_LOCAL_INT0_ENABLE_SI_AOERR1_MASK 0x0000000000100000UL +#define UVH_LOCAL_INT0_ENABLE_RH_VPI_INT_SHFT 21 +#define UVH_LOCAL_INT0_ENABLE_RH_VPI_INT_MASK 0x0000000000200000UL +#define UVH_LOCAL_INT0_ENABLE_SYSTEM_SHUTDOWN_INT_SHFT 22 +#define UVH_LOCAL_INT0_ENABLE_SYSTEM_SHUTDOWN_INT_MASK 0x0000000000400000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_0_SHFT 23 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_0_MASK 0x0000000000800000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_1_SHFT 24 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_1_MASK 0x0000000001000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_2_SHFT 25 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_2_MASK 0x0000000002000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_3_SHFT 26 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_3_MASK 0x0000000004000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_4_SHFT 27 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_4_MASK 0x0000000008000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_5_SHFT 28 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_5_MASK 0x0000000010000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_6_SHFT 29 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_6_MASK 0x0000000020000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_7_SHFT 30 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_7_MASK 0x0000000040000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_8_SHFT 31 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_8_MASK 0x0000000080000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_9_SHFT 32 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_9_MASK 0x0000000100000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_10_SHFT 33 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_10_MASK 0x0000000200000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_11_SHFT 34 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_11_MASK 0x0000000400000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_12_SHFT 35 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_12_MASK 0x0000000800000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_13_SHFT 36 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_13_MASK 0x0000001000000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_14_SHFT 37 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_14_MASK 0x0000002000000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_15_SHFT 38 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_15_MASK 0x0000004000000000UL +#define UVH_LOCAL_INT0_ENABLE_L1_NMI_INT_SHFT 39 +#define UVH_LOCAL_INT0_ENABLE_L1_NMI_INT_MASK 0x0000008000000000UL +#define UVH_LOCAL_INT0_ENABLE_STOP_CLOCK_SHFT 40 +#define UVH_LOCAL_INT0_ENABLE_STOP_CLOCK_MASK 0x0000010000000000UL +#define UVH_LOCAL_INT0_ENABLE_ASIC_TO_L1_SHFT 41 +#define UVH_LOCAL_INT0_ENABLE_ASIC_TO_L1_MASK 0x0000020000000000UL +#define UVH_LOCAL_INT0_ENABLE_L1_TO_ASIC_SHFT 42 +#define UVH_LOCAL_INT0_ENABLE_L1_TO_ASIC_MASK 0x0000040000000000UL +#define UVH_LOCAL_INT0_ENABLE_LTC_INT_SHFT 43 +#define UVH_LOCAL_INT0_ENABLE_LTC_INT_MASK 0x0000080000000000UL +#define UVH_LOCAL_INT0_ENABLE_LA_SEQ_TRIGGER_SHFT 44 +#define UVH_LOCAL_INT0_ENABLE_LA_SEQ_TRIGGER_MASK 0x0000100000000000UL + +union uvh_local_int0_enable_u { + unsigned long v; + struct uvh_local_int0_enable_s { + unsigned long lb_hcerr : 1; /* RW */ + unsigned long gr0_hcerr : 1; /* RW */ + unsigned long gr1_hcerr : 1; /* RW */ + unsigned long lh_hcerr : 1; /* RW */ + unsigned long rh_hcerr : 1; /* RW */ + unsigned long xn_hcerr : 1; /* RW */ + unsigned long si_hcerr : 1; /* RW */ + unsigned long lb_aoerr0 : 1; /* RW */ + unsigned long gr0_aoerr0 : 1; /* RW */ + unsigned long gr1_aoerr0 : 1; /* RW */ + unsigned long lh_aoerr0 : 1; /* RW */ + unsigned long rh_aoerr0 : 1; /* RW */ + unsigned long xn_aoerr0 : 1; /* RW */ + unsigned long si_aoerr0 : 1; /* RW */ + unsigned long lb_aoerr1 : 1; /* RW */ + unsigned long gr0_aoerr1 : 1; /* RW */ + unsigned long gr1_aoerr1 : 1; /* RW */ + unsigned long lh_aoerr1 : 1; /* RW */ + unsigned long rh_aoerr1 : 1; /* RW */ + unsigned long xn_aoerr1 : 1; /* RW */ + unsigned long si_aoerr1 : 1; /* RW */ + unsigned long rh_vpi_int : 1; /* RW */ + unsigned long system_shutdown_int : 1; /* RW */ + unsigned long lb_irq_int_0 : 1; /* RW */ + unsigned long lb_irq_int_1 : 1; /* RW */ + unsigned long lb_irq_int_2 : 1; /* RW */ + unsigned long lb_irq_int_3 : 1; /* RW */ + unsigned long lb_irq_int_4 : 1; /* RW */ + unsigned long lb_irq_int_5 : 1; /* RW */ + unsigned long lb_irq_int_6 : 1; /* RW */ + unsigned long lb_irq_int_7 : 1; /* RW */ + unsigned long lb_irq_int_8 : 1; /* RW */ + unsigned long lb_irq_int_9 : 1; /* RW */ + unsigned long lb_irq_int_10 : 1; /* RW */ + unsigned long lb_irq_int_11 : 1; /* RW */ + unsigned long lb_irq_int_12 : 1; /* RW */ + unsigned long lb_irq_int_13 : 1; /* RW */ + unsigned long lb_irq_int_14 : 1; /* RW */ + unsigned long lb_irq_int_15 : 1; /* RW */ + unsigned long l1_nmi_int : 1; /* RW */ + unsigned long stop_clock : 1; /* RW */ + unsigned long asic_to_l1 : 1; /* RW */ + unsigned long l1_to_asic : 1; /* RW */ + unsigned long ltc_int : 1; /* RW */ + unsigned long la_seq_trigger : 1; /* RW */ + unsigned long rsvd_45_63 : 19; /* */ + } s; +}; + /* ========================================================================= */ /* UVH_NODE_ID */ /* ========================================================================= */ @@ -283,6 +645,73 @@ union uvh_node_id_u { } s; }; +/* ========================================================================= */ +/* UVH_NODE_PRESENT_TABLE */ +/* ========================================================================= */ +#define UVH_NODE_PRESENT_TABLE 0x1400UL +#define UVH_NODE_PRESENT_TABLE_DEPTH 16 + +#define UVH_NODE_PRESENT_TABLE_NODES_SHFT 0 +#define UVH_NODE_PRESENT_TABLE_NODES_MASK 0xffffffffffffffffUL + +union uvh_node_present_table_u { + unsigned long v; + struct uvh_node_present_table_s { + unsigned long nodes : 64; /* RW */ + } s; +}; + +/* ========================================================================= */ +/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR */ +/* ========================================================================= */ +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR 0x16000d0UL + +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT 24 +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_MASK 0x00003fffff000000UL + +union uvh_rh_gam_alias210_redirect_config_0_mmr_u { + unsigned long v; + struct uvh_rh_gam_alias210_redirect_config_0_mmr_s { + unsigned long rsvd_0_23 : 24; /* */ + unsigned long dest_base : 22; /* RW */ + unsigned long rsvd_46_63: 18; /* */ + } s; +}; + +/* ========================================================================= */ +/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR */ +/* ========================================================================= */ +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR 0x16000e0UL + +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_SHFT 24 +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_MASK 0x00003fffff000000UL + +union uvh_rh_gam_alias210_redirect_config_1_mmr_u { + unsigned long v; + struct uvh_rh_gam_alias210_redirect_config_1_mmr_s { + unsigned long rsvd_0_23 : 24; /* */ + unsigned long dest_base : 22; /* RW */ + unsigned long rsvd_46_63: 18; /* */ + } s; +}; + +/* ========================================================================= */ +/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR */ +/* ========================================================================= */ +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR 0x16000f0UL + +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_SHFT 24 +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_MASK 0x00003fffff000000UL + +union uvh_rh_gam_alias210_redirect_config_2_mmr_u { + unsigned long v; + struct uvh_rh_gam_alias210_redirect_config_2_mmr_s { + unsigned long rsvd_0_23 : 24; /* */ + unsigned long dest_base : 22; /* RW */ + unsigned long rsvd_46_63: 18; /* */ + } s; +}; + /* ========================================================================= */ /* UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR */ /* ========================================================================= */ @@ -369,5 +798,77 @@ union uvh_si_addr_map_config_u { } s; }; +/* ========================================================================= */ +/* UVH_SI_ALIAS0_OVERLAY_CONFIG */ +/* ========================================================================= */ +#define UVH_SI_ALIAS0_OVERLAY_CONFIG 0xc80008UL + +#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_SHFT 24 +#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL +#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_SHFT 48 +#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL +#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_SHFT 63 +#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL + +union uvh_si_alias0_overlay_config_u { + unsigned long v; + struct uvh_si_alias0_overlay_config_s { + unsigned long rsvd_0_23: 24; /* */ + unsigned long base : 8; /* RW */ + unsigned long rsvd_32_47: 16; /* */ + unsigned long m_alias : 5; /* RW */ + unsigned long rsvd_53_62: 10; /* */ + unsigned long enable : 1; /* RW */ + } s; +}; + +/* ========================================================================= */ +/* UVH_SI_ALIAS1_OVERLAY_CONFIG */ +/* ========================================================================= */ +#define UVH_SI_ALIAS1_OVERLAY_CONFIG 0xc80010UL + +#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_SHFT 24 +#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL +#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_SHFT 48 +#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL +#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_SHFT 63 +#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL + +union uvh_si_alias1_overlay_config_u { + unsigned long v; + struct uvh_si_alias1_overlay_config_s { + unsigned long rsvd_0_23: 24; /* */ + unsigned long base : 8; /* RW */ + unsigned long rsvd_32_47: 16; /* */ + unsigned long m_alias : 5; /* RW */ + unsigned long rsvd_53_62: 10; /* */ + unsigned long enable : 1; /* RW */ + } s; +}; + +/* ========================================================================= */ +/* UVH_SI_ALIAS2_OVERLAY_CONFIG */ +/* ========================================================================= */ +#define UVH_SI_ALIAS2_OVERLAY_CONFIG 0xc80018UL + +#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_SHFT 24 +#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL +#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_SHFT 48 +#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL +#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_SHFT 63 +#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL + +union uvh_si_alias2_overlay_config_u { + unsigned long v; + struct uvh_si_alias2_overlay_config_s { + unsigned long rsvd_0_23: 24; /* */ + unsigned long base : 8; /* RW */ + unsigned long rsvd_32_47: 16; /* */ + unsigned long m_alias : 5; /* RW */ + unsigned long rsvd_53_62: 10; /* */ + unsigned long enable : 1; /* RW */ + } s; +}; + #endif /* __ASM_X86_UV_MMRS__ */ From 15ce60056b24a65b65e28de973a9fd8ac0750a2f Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 2 Jun 2008 13:20:11 +0200 Subject: [PATCH 229/821] xen: export get_phys_to_machine -tip testing found the following xen-console symbols trouble: ERROR: "get_phys_to_machine" [drivers/video/xen-fbfront.ko] undefined! ERROR: "get_phys_to_machine" [drivers/net/xen-netfront.ko] undefined! ERROR: "get_phys_to_machine" [drivers/input/xen-kbdfront.ko] undefined! with: http://redhat.com/~mingo/misc/config-Mon_Jun__2_12_25_13_CEST_2008.bad --- arch/x86/xen/mmu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index eef3b5c6e2fe..17f374eb1faa 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -136,6 +136,7 @@ unsigned long get_phys_to_machine(unsigned long pfn) idx = p2m_index(pfn); return p2m_top[topidx][idx]; } +EXPORT_SYMBOL_GPL(get_phys_to_machine); static void alloc_p2m(unsigned long **pp, unsigned long *mfnp) { From e2426cf85f8db5891fb5831323d2d0c176c4dadc Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Sat, 31 May 2008 01:24:27 +0100 Subject: [PATCH 230/821] xen: avoid hypercalls when updating unpinned pud/pmd When operating on an unpinned pagetable (ie, one under construction or destruction), it isn't necessary to use a hypercall to update a pud/pmd entry. Jan Beulich observed that a similar optimisation avoided many thousands of hypercalls while doing a kernel build. One tricky part is that early in the kernel boot there's no page structure, so we can't check to see if the page is pinned. In that case, we just always use the hypercall. Signed-off-by: Jeremy Fitzhardinge Cc: Jan Beulich Signed-off-by: Ingo Molnar --- arch/x86/xen/enlighten.c | 14 +++++++++++--- arch/x86/xen/mmu.c | 39 +++++++++++++++++++++++++++++++++++---- arch/x86/xen/mmu.h | 8 ++++---- 3 files changed, 50 insertions(+), 11 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index b94f63ac228b..ed9f04b3836d 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -901,6 +901,14 @@ static __init void xen_pagetable_setup_done(pgd_t *base) pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(base))); } +static __init void xen_post_allocator_init(void) +{ + pv_mmu_ops.set_pmd = xen_set_pmd; + pv_mmu_ops.set_pud = xen_set_pud; + + xen_mark_init_mm_pinned(); +} + /* This is called once we have the cpu_possible_map */ void xen_setup_vcpu_info_placement(void) { @@ -988,7 +996,7 @@ static const struct pv_init_ops xen_init_ops __initdata = { .banner = xen_banner, .memory_setup = xen_memory_setup, .arch_setup = xen_arch_setup, - .post_allocator_init = xen_mark_init_mm_pinned, + .post_allocator_init = xen_post_allocator_init, }; static const struct pv_time_ops xen_time_ops __initdata = { @@ -1100,7 +1108,7 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .set_pte = NULL, /* see xen_pagetable_setup_* */ .set_pte_at = xen_set_pte_at, - .set_pmd = xen_set_pmd, + .set_pmd = xen_set_pmd_hyper, .pte_val = xen_pte_val, .pte_flags = native_pte_val, @@ -1111,7 +1119,7 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .set_pte_atomic = xen_set_pte_atomic, .set_pte_present = xen_set_pte_at, - .set_pud = xen_set_pud, + .set_pud = xen_set_pud_hyper, .pte_clear = xen_pte_clear, .pmd_clear = xen_pmd_clear, diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 17f374eb1faa..4fa0934db925 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -223,7 +223,14 @@ void make_lowmem_page_readwrite(void *vaddr) } -void xen_set_pmd(pmd_t *ptr, pmd_t val) +static bool page_pinned(void *ptr) +{ + struct page *page = virt_to_page(ptr); + + return PagePinned(page); +} + +void xen_set_pmd_hyper(pmd_t *ptr, pmd_t val) { struct multicall_space mcs; struct mmu_update *u; @@ -241,6 +248,18 @@ void xen_set_pmd(pmd_t *ptr, pmd_t val) preempt_enable(); } +void xen_set_pmd(pmd_t *ptr, pmd_t val) +{ + /* If page is not pinned, we can just update the entry + directly */ + if (!page_pinned(ptr)) { + *ptr = val; + return; + } + + xen_set_pmd_hyper(ptr, val); +} + /* * Associate a virtual page frame with a given physical page frame * and protection flags for that frame. @@ -348,7 +367,7 @@ pmdval_t xen_pmd_val(pmd_t pmd) return ret; } -void xen_set_pud(pud_t *ptr, pud_t val) +void xen_set_pud_hyper(pud_t *ptr, pud_t val) { struct multicall_space mcs; struct mmu_update *u; @@ -366,6 +385,18 @@ void xen_set_pud(pud_t *ptr, pud_t val) preempt_enable(); } +void xen_set_pud(pud_t *ptr, pud_t val) +{ + /* If page is not pinned, we can just update the entry + directly */ + if (!page_pinned(ptr)) { + *ptr = val; + return; + } + + xen_set_pud_hyper(ptr, val); +} + void xen_set_pte(pte_t *ptep, pte_t pte) { ptep->pte_high = pte.pte_high; @@ -387,7 +418,7 @@ void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) void xen_pmd_clear(pmd_t *pmdp) { - xen_set_pmd(pmdp, __pmd(0)); + set_pmd(pmdp, __pmd(0)); } pmd_t xen_make_pmd(pmdval_t pmd) @@ -758,7 +789,7 @@ void xen_exit_mmap(struct mm_struct *mm) spin_lock(&mm->page_table_lock); /* pgd may not be pinned in the error exit path of execve */ - if (PagePinned(virt_to_page(mm->pgd))) + if (page_pinned(mm->pgd)) xen_pgd_unpin(mm->pgd); spin_unlock(&mm->page_table_lock); diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h index 5fe961caffd4..e3dd09e25c63 100644 --- a/arch/x86/xen/mmu.h +++ b/arch/x86/xen/mmu.h @@ -25,10 +25,6 @@ enum pt_level { void set_pte_mfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags); -void xen_set_pte(pte_t *ptep, pte_t pteval); -void xen_set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pteval); -void xen_set_pmd(pmd_t *pmdp, pmd_t pmdval); void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next); void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm); @@ -45,10 +41,14 @@ pte_t xen_make_pte(pteval_t); pmd_t xen_make_pmd(pmdval_t); pgd_t xen_make_pgd(pgdval_t); +void xen_set_pte(pte_t *ptep, pte_t pteval); void xen_set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval); void xen_set_pte_atomic(pte_t *ptep, pte_t pte); +void xen_set_pmd(pmd_t *pmdp, pmd_t pmdval); void xen_set_pud(pud_t *ptr, pud_t val); +void xen_set_pmd_hyper(pmd_t *pmdp, pmd_t pmdval); +void xen_set_pud_hyper(pud_t *ptr, pud_t val); void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep); void xen_pmd_clear(pmd_t *pmdp); From 9c7a794209f8a91f47697c3be20597eb60531e6d Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Sat, 31 May 2008 01:33:02 +0100 Subject: [PATCH 231/821] xen: restore vcpu_info mapping If we're using vcpu_info mapping, then make sure its restored on all processors before relasing them from stop_machine. The only complication is that if this fails, we can't continue because we've already made assumptions that the mapping is available (baked in calls to the _direct versions of the functions, for example). Fortunately this can only happen with a 32-bit hypervisor, which may possibly run out of mapping space. On a 64-bit hypervisor, this is a non-issue. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- arch/x86/xen/enlighten.c | 30 +++++++++++++++++++++++++++++- arch/x86/xen/suspend.c | 4 +++- arch/x86/xen/xen-ops.h | 1 + 3 files changed, 33 insertions(+), 2 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index ed9f04b3836d..8e6152e6ed88 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -98,7 +98,7 @@ struct shared_info *HYPERVISOR_shared_info = (void *)&xen_dummy_shared_info; */ static int have_vcpu_info_placement = 1; -static void __init xen_vcpu_setup(int cpu) +static void xen_vcpu_setup(int cpu) { struct vcpu_register_vcpu_info info; int err; @@ -136,6 +136,34 @@ static void __init xen_vcpu_setup(int cpu) } } +/* + * On restore, set the vcpu placement up again. + * If it fails, then we're in a bad state, since + * we can't back out from using it... + */ +void xen_vcpu_restore(void) +{ + if (have_vcpu_info_placement) { + int cpu; + + for_each_online_cpu(cpu) { + bool other_cpu = (cpu != smp_processor_id()); + + if (other_cpu && + HYPERVISOR_vcpu_op(VCPUOP_down, cpu, NULL)) + BUG(); + + xen_vcpu_setup(cpu); + + if (other_cpu && + HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL)) + BUG(); + } + + BUG_ON(!have_vcpu_info_placement); + } +} + static void __init xen_banner(void) { printk(KERN_INFO "Booting paravirtualized kernel on %s\n", diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index 7620a16fe535..7ab10f6b39a5 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -26,6 +26,8 @@ void xen_pre_suspend(void) void xen_post_suspend(int suspend_cancelled) { + xen_setup_shared_info(); + if (suspend_cancelled) { xen_start_info->store_mfn = pfn_to_mfn(xen_start_info->store_mfn); @@ -35,8 +37,8 @@ void xen_post_suspend(int suspend_cancelled) #ifdef CONFIG_SMP xen_cpu_initialized_map = cpu_online_map; #endif + xen_vcpu_restore(); } - xen_setup_shared_info(); } diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index a0503acad664..a457e03e1b21 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -26,6 +26,7 @@ char * __init xen_memory_setup(void); void __init xen_arch_setup(void); void __init xen_init_IRQ(void); void xen_enable_sysenter(void); +void xen_vcpu_restore(void); void __init xen_build_dynamic_phys_to_machine(void); From d07af1f0e3a3e378074fc36322dd7b0e72d9a3e2 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Sat, 31 May 2008 01:33:03 +0100 Subject: [PATCH 232/821] xen: resume timers on all vcpus On resume, the vcpu timer modes will not be restored. The timer infrastructure doesn't do this for us, since it assumes the cpus are offline. We can just poke the other vcpus into the right mode directly though. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- arch/x86/xen/suspend.c | 1 + arch/x86/xen/time.c | 13 +++++++++++++ arch/x86/xen/xen-ops.h | 1 + 3 files changed, 15 insertions(+) diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index 7ab10f6b39a5..251669a932d4 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -38,6 +38,7 @@ void xen_post_suspend(int suspend_cancelled) xen_cpu_initialized_map = cpu_online_map; #endif xen_vcpu_restore(); + xen_timer_resume(); } } diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index c39e1a5aa241..ea137fb660c0 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -572,6 +572,19 @@ void xen_setup_cpu_clockevents(void) clockevents_register_device(&__get_cpu_var(xen_clock_events)); } +void xen_timer_resume(void) +{ + int cpu; + + if (xen_clockevent != &xen_vcpuop_clockevent) + return; + + for_each_online_cpu(cpu) { + if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL)) + BUG(); + } +} + __init void xen_time_init(void) { int cpu = smp_processor_id(); diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index a457e03e1b21..9a055592a307 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -37,6 +37,7 @@ void __init xen_time_init(void); unsigned long xen_get_wallclock(void); int xen_set_wallclock(unsigned long time); unsigned long long xen_sched_clock(void); +void xen_timer_resume(void); irqreturn_t xen_debug_interrupt(int irq, void *dev_id); From 7e0edc1bc343231029084761ebf59e522902eb49 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Sat, 31 May 2008 01:33:04 +0100 Subject: [PATCH 233/821] xen: add new Xen elfnote types and use them appropriately Define recently added XEN_ELFNOTEs, and use them appropriately. Most significantly, this enables domain checkpointing (xm save -c). Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- arch/x86/xen/xen-head.S | 5 +++++ include/xen/interface/elfnote.h | 20 ++++++++++++++++++++ 2 files changed, 25 insertions(+) diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S index 2ab5f42f34d8..ef6c9e005f90 100644 --- a/arch/x86/xen/xen-head.S +++ b/arch/x86/xen/xen-head.S @@ -7,6 +7,7 @@ #include #include #include +#include __INIT ENTRY(startup_xen) @@ -32,5 +33,9 @@ ENTRY(hypercall_page) ELFNOTE(Xen, XEN_ELFNOTE_FEATURES, .asciz "!writable_page_tables|pae_pgdir_above_4gb") ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz "yes") ELFNOTE(Xen, XEN_ELFNOTE_LOADER, .asciz "generic") + ELFNOTE(Xen, XEN_ELFNOTE_L1_MFN_VALID, + .quad _PAGE_PRESENT; .quad _PAGE_PRESENT) + ELFNOTE(Xen, XEN_ELFNOTE_SUSPEND_CANCEL, .long 1) + ELFNOTE(Xen, XEN_ELFNOTE_HV_START_LOW, .long __HYPERVISOR_VIRT_START) #endif /*CONFIG_XEN */ diff --git a/include/xen/interface/elfnote.h b/include/xen/interface/elfnote.h index a64d3df5bd95..7a8262c375cc 100644 --- a/include/xen/interface/elfnote.h +++ b/include/xen/interface/elfnote.h @@ -120,6 +120,26 @@ */ #define XEN_ELFNOTE_BSD_SYMTAB 11 +/* + * The lowest address the hypervisor hole can begin at (numeric). + * + * This must not be set higher than HYPERVISOR_VIRT_START. Its presence + * also indicates to the hypervisor that the kernel can deal with the + * hole starting at a higher address. + */ +#define XEN_ELFNOTE_HV_START_LOW 12 + +/* + * List of maddr_t-sized mask/value pairs describing how to recognize + * (non-present) L1 page table entries carrying valid MFNs (numeric). + */ +#define XEN_ELFNOTE_L1_MFN_VALID 13 + +/* + * Whether or not the guest supports cooperative suspend cancellation. + */ +#define XEN_ELFNOTE_SUSPEND_CANCEL 14 + #endif /* __XEN_PUBLIC_ELFNOTE_H__ */ /* From 3d1ba1da2b4ff4ace7801e99fb9a3095b182d847 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 2 Jun 2008 13:50:10 +0200 Subject: [PATCH 234/821] x86: fix nmi.c build bug apic.h needs to be included for the apic_write_around() definition. --- arch/x86/kernel/nmi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c index bf143f191fb1..cbd4fa3c475b 100644 --- a/arch/x86/kernel/nmi.c +++ b/arch/x86/kernel/nmi.c @@ -11,6 +11,8 @@ * Mikael Pettersson : PM converted to driver model. Disable/enable API. */ +#include + #include #include #include From 4c1cbafb88490757a38119c41229251369bcecbc Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 3 Jun 2008 09:28:52 +0200 Subject: [PATCH 235/821] x86 mpparse: build fix fix this build bug: drivers/acpi/pci_irq.c: In function 'acpi_pci_irq_enable': drivers/acpi/pci_irq.c:574: error: implicit declaration of function 'mp_config_acpi_gsi' Signed-off-by: Ingo Molnar --- include/asm-x86/acpi.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/asm-x86/acpi.h b/include/asm-x86/acpi.h index 14411c9de46f..73ce5b32443f 100644 --- a/include/asm-x86/acpi.h +++ b/include/asm-x86/acpi.h @@ -28,6 +28,7 @@ #include #include #include +#include #define COMPILER_DEPENDENT_INT64 long long #define COMPILER_DEPENDENT_UINT64 unsigned long long From 2772f54bf37b033263abe4a2314c40a308a1a5cd Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 3 Jun 2008 10:09:45 +0200 Subject: [PATCH 236/821] x86: add acpi_numa_slit_init() dummy implementation on 32-bit allow CONFIG_ACPI_NUMA builds to succeed on 32-bit. --- arch/x86/mm/discontig_32.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index 435c343c14bc..d28987a2f2bb 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -454,3 +454,12 @@ int memory_add_physaddr_to_nid(u64 addr) EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid); #endif + +#ifdef CONFIG_ACPI_NUMA +/* + * Dummy on 32-bit, for now: + */ +void __init acpi_numa_slit_init(struct acpi_table_slit *slit) +{ +} +#endif From b28852d6703e4b72ce363c5168ea8d3fb28b9c57 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 3 Jun 2008 10:11:07 +0200 Subject: [PATCH 237/821] x86: add dummy acpi_numa_processor_affinity_init() implementation on 32-bit allow CONFIG_ACPI_NUMA builds to succeed. --- arch/x86/mm/discontig_32.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index d28987a2f2bb..bb8544a7cb9d 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -462,4 +462,9 @@ EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid); void __init acpi_numa_slit_init(struct acpi_table_slit *slit) { } + +void __init +acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) +{ +} #endif From f3294690979634ee10398bb0beadfe1d4edb881d Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 3 Jun 2008 10:16:10 +0200 Subject: [PATCH 238/821] x86, numaq: add pci_acpi_scan_root() stub allow 32-bit numaq build to succeed with ACPI enabled. --- arch/x86/kernel/numaq_32.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c index e65281b1634b..992f53cb79b6 100644 --- a/arch/x86/kernel/numaq_32.c +++ b/arch/x86/kernel/numaq_32.c @@ -87,3 +87,14 @@ static int __init numaq_tsc_disable(void) return 0; } arch_initcall(numaq_tsc_disable); + +#ifdef CONFIG_ACPI +/* + * Dummy implementation: + */ +struct pci_bus * __devinit +pci_acpi_scan_root(struct acpi_device *device, int domain, int busnum) +{ + return NULL; +} +#endif From cf3d0cb8a10a4fd19439bb34995d9ad28854739a Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 3 Jun 2008 11:36:56 +0200 Subject: [PATCH 239/821] x86: 32-bit numa, build fix on Summit it's possible to have: CONFIG_ACPI_SRAT=y CONFIG_HAVE_ARCH_PARSE_SRAT=y in which case acpi.h defines the acpi_numa_slit_init() and acpi_numa_processor_affinity_init() methods as a macro. --- arch/x86/mm/discontig_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index bb8544a7cb9d..0d28b4bff817 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -455,7 +455,7 @@ int memory_add_physaddr_to_nid(u64 addr) EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid); #endif -#ifdef CONFIG_ACPI_NUMA +#if defined(CONFIG_ACPI_NUMA) && !defined(CONFIG_HAVE_ARCH_PARSE_SRAT) /* * Dummy on 32-bit, for now: */ From 471b3c1b011f807d16f1e19d1d4ecf703f1e7d1a Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 3 Jun 2008 12:39:43 +0200 Subject: [PATCH 240/821] x86, numaq 32-bit: build fix fix: drivers/built-in.o: In function `acpi_numa_init': : undefined reference to `acpi_numa_arch_fixup' which can happen with ACPI && NUMAQ. --- arch/x86/mm/discontig_32.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index 0d28b4bff817..8b4eac0ca07d 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -467,4 +467,8 @@ void __init acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) { } + +void __init acpi_numa_arch_fixup(void) +{ +} #endif From ba924c81dd5a7a7fb5ded025af7fdd3b61f8ca67 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 31 May 2008 22:51:51 -0700 Subject: [PATCH 241/821] x86, numa, 32-bit: increase max_elements to 1024 so every element will represent 64M instead of 256M. AMD opteron could have HW memory hole remapping, so could have [0, 8g + 64M) on node0. Reduce element size to 64M to keep that on node 0 Later we need to use find_e820_area() to allocate memory_node_map like on 64-bit. But need to move memory_present out of populate_mem_map... Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/mm/discontig_32.c | 14 +++++++------- include/asm-x86/mmzone_32.h | 4 ++-- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index 55fdbab6b014..922af20d1d29 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -59,14 +59,14 @@ unsigned long node_end_pfn[MAX_NUMNODES] __read_mostly; /* * 4) physnode_map - the mapping between a pfn and owning node * physnode_map keeps track of the physical memory layout of a generic - * numa node on a 256Mb break (each element of the array will - * represent 256Mb of memory and will be marked by the node id. so, + * numa node on a 64Mb break (each element of the array will + * represent 64Mb of memory and will be marked by the node id. so, * if the first gig is on node 0, and the second gig is on node 1 * physnode_map will contain: * - * physnode_map[0-3] = 0; - * physnode_map[4-7] = 1; - * physnode_map[8- ] = -1; + * physnode_map[0-15] = 0; + * physnode_map[16-31] = 1; + * physnode_map[32- ] = -1; */ s8 physnode_map[MAX_ELEMENTS] __read_mostly = { [0 ... (MAX_ELEMENTS - 1)] = -1}; EXPORT_SYMBOL(physnode_map); @@ -81,9 +81,9 @@ void memory_present(int nid, unsigned long start, unsigned long end) printk(KERN_DEBUG " "); for (pfn = start; pfn < end; pfn += PAGES_PER_ELEMENT) { physnode_map[pfn / PAGES_PER_ELEMENT] = nid; - printk("%ld ", pfn); + printk(KERN_CONT "%ld ", pfn); } - printk("\n"); + printk(KERN_CONT "\n"); } unsigned long node_memmap_size_bytes(int nid, unsigned long start_pfn, diff --git a/include/asm-x86/mmzone_32.h b/include/asm-x86/mmzone_32.h index faef751181b7..ab0012888c44 100644 --- a/include/asm-x86/mmzone_32.h +++ b/include/asm-x86/mmzone_32.h @@ -51,14 +51,14 @@ extern int early_pfn_to_nid(unsigned long pfn); /* * generic node memory support, the following assumptions apply: * - * 1) memory comes in 256Mb contigious chunks which are either present or not + * 1) memory comes in 64Mb contigious chunks which are either present or not * 2) we will not have more than 64Gb in total * * for now assume that 64Gb is max amount of RAM for whole system * 64Gb / 4096bytes/page = 16777216 pages */ #define MAX_NR_PAGES 16777216 -#define MAX_ELEMENTS 256 +#define MAX_ELEMENTS 1024 #define PAGES_PER_ELEMENT (MAX_NR_PAGES/MAX_ELEMENTS) extern s8 physnode_map[]; From b66cd7207387b9b428aaf1988e21dd263c6a4928 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 31 May 2008 22:53:47 -0700 Subject: [PATCH 242/821] x86: set node_remap_size[0] in fallback path ... otherwise alloc_remap will not get node_mem_map from kva area, and alloc_node_mem_map has to alloc_bootmem_node to get mem_map. It will use two low address copies ... Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/mm/discontig_32.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index 922af20d1d29..98b099eeab3a 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -124,6 +124,7 @@ int __init get_memcfg_numa_flat(void) node_start_pfn[0] = 0; node_end_pfn[0] = max_pfn; memory_present(0, 0, max_pfn); + node_remap_size[0] = node_memmap_size_bytes(0, 0, max_pfn); /* Indicate there is one node available. */ nodes_clear(node_online_map); From 0596152388e234efebce464355186ad9e16c8cb6 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 31 May 2008 22:52:47 -0700 Subject: [PATCH 243/821] x86, 32-bit: change propagate_e820_map() back to find_max_pfn() we don't need to call memory_present that early. numa and sparse will call memory_present later and might even fail, it will call memory_present for the full range. also for sparse it will call alloc_bootmem ... before we set up bootmem. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820_32.c | 5 ++--- arch/x86/kernel/setup_32.c | 4 ++-- arch/x86/mm/discontig_32.c | 2 +- include/asm-x86/e820_32.h | 2 +- 4 files changed, 6 insertions(+), 7 deletions(-) diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c index db760d4706af..0c025d04fc2e 100644 --- a/arch/x86/kernel/e820_32.c +++ b/arch/x86/kernel/e820_32.c @@ -210,7 +210,7 @@ void __init init_iomem_resources(struct resource *code_resource, /* * Find the highest page frame number we have available */ -void __init propagate_e820_map(void) +void __init find_max_pfn(void) { int i; @@ -227,7 +227,6 @@ void __init propagate_e820_map(void) continue; if (end > max_pfn) max_pfn = end; - memory_present(0, start, end); } } @@ -361,7 +360,7 @@ static int __init parse_memmap(char *arg) * size before original memory map is * reset. */ - propagate_e820_map(); + find_max_pfn(); saved_max_pfn = max_pfn; #endif e820.nr_map = 0; diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 6f40cb560ea9..29010420458d 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -730,10 +730,10 @@ void __init setup_arch(char **cmdline_p) efi_init(); /* update e820 for memory not covered by WB MTRRs */ - propagate_e820_map(); + find_max_pfn(); mtrr_bp_init(); if (mtrr_trim_uncached_memory(max_pfn)) - propagate_e820_map(); + find_max_pfn(); max_low_pfn = setup_memory(); diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index 98b099eeab3a..ebbbba338150 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -120,7 +120,7 @@ int __init get_memcfg_numa_flat(void) printk("NUMA - single node, flat memory mode\n"); /* Run the memory configuration and find the top of memory. */ - propagate_e820_map(); + find_max_pfn(); node_start_pfn[0] = 0; node_end_pfn[0] = max_pfn; memory_present(0, 0, max_pfn); diff --git a/include/asm-x86/e820_32.h b/include/asm-x86/e820_32.h index 7ace82570a36..00fbc60b9d30 100644 --- a/include/asm-x86/e820_32.h +++ b/include/asm-x86/e820_32.h @@ -21,7 +21,7 @@ extern void setup_memory_map(void); extern void finish_e820_parsing(void); -extern void propagate_e820_map(void); +extern void find_max_pfn(void); extern void register_bootmem_low_pages(unsigned long max_low_pfn); extern void limit_regions(unsigned long long size); extern void init_iomem_resources(struct resource *code_resource, From e8c27ac9191ab9e6506ae5cbe70d87ac50f8e960 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 1 Jun 2008 13:15:22 -0700 Subject: [PATCH 244/821] x86, numa, 32-bit: print out debug info on all kvas also fix the print out of node_remap_end_vaddr Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/mm/discontig_32.c | 9 +++++++-- mm/page_alloc.c | 5 +++++ 2 files changed, 12 insertions(+), 2 deletions(-) diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index ebbbba338150..3150ad385672 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -168,6 +168,8 @@ static void __init allocate_pgdat(int nid) reserve_early(pgdat_phys, pgdat_phys + sizeof(pg_data_t), "NODE_DATA"); } + printk(KERN_DEBUG "allocate_pgdat: node %d NODE_DATA %08lx\n", + nid, (unsigned long)NODE_DATA(nid)); } #ifdef CONFIG_DISCONTIGMEM @@ -208,8 +210,12 @@ void __init remap_numa_kva(void) int node; for_each_online_node(node) { + printk(KERN_DEBUG "remap_numa_kva: node %d\n", node); for (pfn=0; pfn < node_remap_size[node]; pfn += PTRS_PER_PTE) { vaddr = node_remap_start_vaddr[node]+(pfn<node_mem_map); +#endif free_area_init_core(pgdat, zones_size, zholes_size); } From 2944e16b25e7fb8b5ee0dd9dc7197a0f9e523cfd Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 1 Jun 2008 13:17:38 -0700 Subject: [PATCH 245/821] x86: update mptable make mptable to be consistent with acpi routing, so we could: 1. kexec kernel with acpi=off 2. work around BIOSes where acpi routing is working, but mptable is not right, so can use kernel/kexec to start other OSes that don't have good acpi support. command line: update_mptable Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 22 ++ arch/x86/kernel/e820.c | 25 +++ arch/x86/kernel/mpparse.c | 401 ++++++++++++++++++++++++++++++++++-- arch/x86/kernel/setup_64.c | 4 + drivers/acpi/pci_irq.c | 5 + include/asm-x86/e820.h | 1 + include/asm-x86/mpspec.h | 4 + 7 files changed, 445 insertions(+), 17 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 2ddfabae382b..f226bdc19f69 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1154,6 +1154,28 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity) return gsi; } +int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin, + u32 gsi, int triggering, int polarity) +{ + struct mpc_config_intsrc intsrc; + int ioapic; + + /* print the entry should happen on mptable identically */ + intsrc.mpc_type = MP_INTSRC; + intsrc.mpc_irqtype = mp_INT; + intsrc.mpc_irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) | + (polarity == ACPI_ACTIVE_HIGH ? 1 : 3); + intsrc.mpc_srcbus = number; + intsrc.mpc_srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3); + ioapic = mp_find_ioapic(gsi); + intsrc.mpc_dstapic = mp_ioapic_routing[ioapic].apic_id; + intsrc.mpc_dstirq = gsi - mp_ioapic_routing[ioapic].gsi_base; + + MP_intsrc_info(&intsrc); + + return 0; +} + /* * Parse IOAPIC related entries in MADT * returns 0 on success, < 0 on error diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 0cd9132c9450..cd2b99e27d43 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -739,3 +739,28 @@ u64 __init find_e820_area_size(u64 start, u64 *sizep, u64 align) return -1UL; } + +/* + * pre allocated 4k and reserved it in e820 + */ +u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align) +{ + u64 size = 0; + u64 addr; + u64 start; + + start = startt; + while (size < sizet) + start = find_e820_area_size(start, &size, align); + + if (size < sizet) + return 0; + + addr = round_down(start + size - sizet, align); + update_memory_range(addr, sizet, E820_RAM, E820_RESERVED); + printk(KERN_INFO "update e820 for early_reserve_e820\n"); + update_e820(); + + return addr; +} + diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 9f3792d55044..8898aa49079d 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -25,6 +25,8 @@ #include #include #include +#include +#include #include #ifdef CONFIG_X86_32 @@ -161,20 +163,81 @@ static void __init MP_ioapic_info(struct mpc_config_ioapic *m) nr_ioapics++; } -static void __init MP_intsrc_info(struct mpc_config_intsrc *m) +static void print_MP_intsrc_info(struct mpc_config_intsrc *m) { - printk(KERN_INFO "Int: type %d, pol %d, trig %d, bus %02x," + printk(KERN_CONT "Int: type %d, pol %d, trig %d, bus %02x," " IRQ %02x, APIC ID %x, APIC INT %02x\n", m->mpc_irqtype, m->mpc_irqflag & 3, (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus, m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq); - mp_irqs[mp_irq_entries].mp_dstapic = m->mpc_dstapic; - mp_irqs[mp_irq_entries].mp_type = m->mpc_type; - mp_irqs[mp_irq_entries].mp_irqtype = m->mpc_irqtype; - mp_irqs[mp_irq_entries].mp_irqflag = m->mpc_irqflag; - mp_irqs[mp_irq_entries].mp_srcbus = m->mpc_srcbus; - mp_irqs[mp_irq_entries].mp_srcbusirq = m->mpc_srcbusirq; - mp_irqs[mp_irq_entries].mp_dstirq = m->mpc_dstirq; +} + +static void __init print_mp_irq_info(struct mp_config_intsrc *mp_irq) +{ + printk(KERN_CONT "Int: type %d, pol %d, trig %d, bus %02x," + " IRQ %02x, APIC ID %x, APIC INT %02x\n", + mp_irq->mp_irqtype, mp_irq->mp_irqflag & 3, + (mp_irq->mp_irqflag >> 2) & 3, mp_irq->mp_srcbus, + mp_irq->mp_srcbusirq, mp_irq->mp_dstapic, mp_irq->mp_dstirq); +} + +static void assign_to_mp_irq(struct mpc_config_intsrc *m, + struct mp_config_intsrc *mp_irq) +{ + mp_irq->mp_dstapic = m->mpc_dstapic; + mp_irq->mp_type = m->mpc_type; + mp_irq->mp_irqtype = m->mpc_irqtype; + mp_irq->mp_irqflag = m->mpc_irqflag; + mp_irq->mp_srcbus = m->mpc_srcbus; + mp_irq->mp_srcbusirq = m->mpc_srcbusirq; + mp_irq->mp_dstirq = m->mpc_dstirq; +} + +static void __init assign_to_mpc_intsrc(struct mp_config_intsrc *mp_irq, + struct mpc_config_intsrc *m) +{ + m->mpc_dstapic = mp_irq->mp_dstapic; + m->mpc_type = mp_irq->mp_type; + m->mpc_irqtype = mp_irq->mp_irqtype; + m->mpc_irqflag = mp_irq->mp_irqflag; + m->mpc_srcbus = mp_irq->mp_srcbus; + m->mpc_srcbusirq = mp_irq->mp_srcbusirq; + m->mpc_dstirq = mp_irq->mp_dstirq; +} + +static int mp_irq_mpc_intsrc_cmp(struct mp_config_intsrc *mp_irq, + struct mpc_config_intsrc *m) +{ + if (mp_irq->mp_dstapic != m->mpc_dstapic) + return 1; + if (mp_irq->mp_type != m->mpc_type) + return 2; + if (mp_irq->mp_irqtype != m->mpc_irqtype) + return 3; + if (mp_irq->mp_irqflag != m->mpc_irqflag) + return 4; + if (mp_irq->mp_srcbus != m->mpc_srcbus) + return 5; + if (mp_irq->mp_srcbusirq != m->mpc_srcbusirq) + return 6; + if (mp_irq->mp_dstirq != m->mpc_dstirq) + return 7; + + return 0; +} + +void MP_intsrc_info(struct mpc_config_intsrc *m) +{ + int i; + + print_MP_intsrc_info(m); + + for (i = 0; i < mp_irq_entries; i++) { + if (!mp_irq_mpc_intsrc_cmp(&mp_irqs[i], m)) + return; + } + + assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]); if (++mp_irq_entries == MAX_IRQ_SOURCES) panic("Max # of irq sources exceeded!!\n"); } @@ -268,12 +331,9 @@ static inline void mps_oem_check(struct mp_config_table *mpc, char *oem, * Read/parse the MPC */ -static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early) +static int __init smp_check_mpc(struct mp_config_table *mpc, char *oem, + char *str) { - char str[16]; - char oem[10]; - int count = sizeof(*mpc); - unsigned char *mpt = ((unsigned char *)mpc) + count; if (memcmp(mpc->mpc_signature, MPC_SIGNATURE, 4)) { printk(KERN_ERR "MPTABLE: bad signature [%c%c%c%c]!\n", @@ -301,13 +361,28 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early) memcpy(str, mpc->mpc_productid, 12); str[12] = 0; -#ifdef CONFIG_X86_32 - mps_oem_check(mpc, oem, str); -#endif printk(KERN_INFO "MPTABLE: Product ID: %s\n", str); printk(KERN_INFO "MPTABLE: APIC at: 0x%X\n", mpc->mpc_lapic); + return 1; +} + +static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early) +{ + char str[16]; + char oem[10]; + + int count = sizeof(*mpc); + unsigned char *mpt = ((unsigned char *)mpc) + count; + + if (!smp_check_mpc(mpc, oem, str)) + return 0; + +#ifdef CONFIG_X86_32 + mps_oem_check(mpc, oem, str); +#endif + /* save the local APIC address, it might be non-default */ if (!acpi_lapic) mp_lapic_addr = mpc->mpc_lapic; @@ -785,3 +860,295 @@ void __init find_smp_config(void) { __find_smp_config(1); } + +#ifdef CONFIG_X86_IO_APIC +static u8 __initdata irq_used[MAX_IRQ_SOURCES]; + +static int __init get_MP_intsrc_index(struct mpc_config_intsrc *m) +{ + int i; + + if (m->mpc_irqtype != mp_INT) + return 0; + + if (m->mpc_irqflag != 0x0f) + return 0; + + /* not legacy */ + + for (i = 0; i < mp_irq_entries; i++) { + if (mp_irqs[i].mp_irqtype != mp_INT) + continue; + + if (mp_irqs[i].mp_irqflag != 0x0f) + continue; + + if (mp_irqs[i].mp_srcbus != m->mpc_srcbus) + continue; + if (mp_irqs[i].mp_srcbusirq != m->mpc_srcbusirq) + continue; + if (irq_used[i]) { + /* already claimed */ + return -2; + } + irq_used[i] = 1; + return i; + } + + /* not found */ + return -1; +} + +#define SPARE_SLOT_NUM 20 + +static struct mpc_config_intsrc __initdata *m_spare[SPARE_SLOT_NUM]; +#endif + +static int __init replace_intsrc_all(struct mp_config_table *mpc, + unsigned long mpc_new_phys, + unsigned long mpc_new_length) +{ +#ifdef CONFIG_X86_IO_APIC + int i; + int nr_m_spare = 0; +#endif + + int count = sizeof(*mpc); + unsigned char *mpt = ((unsigned char *)mpc) + count; + + printk(KERN_INFO "mpc_length %x\n", mpc->mpc_length); + while (count < mpc->mpc_length) { + switch (*mpt) { + case MP_PROCESSOR: + { + struct mpc_config_processor *m = + (struct mpc_config_processor *)mpt; + mpt += sizeof(*m); + count += sizeof(*m); + break; + } + case MP_BUS: + { + struct mpc_config_bus *m = + (struct mpc_config_bus *)mpt; + mpt += sizeof(*m); + count += sizeof(*m); + break; + } + case MP_IOAPIC: + { + mpt += sizeof(struct mpc_config_ioapic); + count += sizeof(struct mpc_config_ioapic); + break; + } + case MP_INTSRC: + { +#ifdef CONFIG_X86_IO_APIC + struct mpc_config_intsrc *m = + (struct mpc_config_intsrc *)mpt; + + printk(KERN_INFO "OLD "); + print_MP_intsrc_info(m); + i = get_MP_intsrc_index(m); + if (i > 0) { + assign_to_mpc_intsrc(&mp_irqs[i], m); + printk(KERN_INFO "NEW "); + print_mp_irq_info(&mp_irqs[i]); + } else if (!i) { + /* legacy, do nothing */ + } else if (nr_m_spare < SPARE_SLOT_NUM) { + /* + * not found (-1), or duplicated (-2) + * are invalid entries, + * we need to use the slot later + */ + m_spare[nr_m_spare] = m; + nr_m_spare++; + } +#endif + mpt += sizeof(struct mpc_config_intsrc); + count += sizeof(struct mpc_config_intsrc); + break; + } + case MP_LINTSRC: + { + struct mpc_config_lintsrc *m = + (struct mpc_config_lintsrc *)mpt; + mpt += sizeof(*m); + count += sizeof(*m); + break; + } + default: + /* wrong mptable */ + printk(KERN_ERR "Your mptable is wrong, contact your HW vendor!\n"); + printk(KERN_ERR "type %x\n", *mpt); + print_hex_dump(KERN_ERR, " ", DUMP_PREFIX_ADDRESS, 16, + 1, mpc, mpc->mpc_length, 1); + goto out; + } + } + +#ifdef CONFIG_X86_IO_APIC + for (i = 0; i < mp_irq_entries; i++) { + if (irq_used[i]) + continue; + + if (mp_irqs[i].mp_irqtype != mp_INT) + continue; + + if (mp_irqs[i].mp_irqflag != 0x0f) + continue; + + if (nr_m_spare > 0) { + printk(KERN_INFO "*NEW* found "); + nr_m_spare--; + assign_to_mpc_intsrc(&mp_irqs[i], m_spare[nr_m_spare]); + m_spare[nr_m_spare] = NULL; + } else { + struct mpc_config_intsrc *m = + (struct mpc_config_intsrc *)mpt; + count += sizeof(struct mpc_config_intsrc); + if (!mpc_new_phys) { + printk(KERN_INFO "No spare slots, try to append...take your risk, new mpc_length %x\n", count); + } else { + if (count <= mpc_new_length) + printk(KERN_INFO "No spare slots, try to append..., new mpc_length %x\n", count); + else { + printk(KERN_ERR "mpc_new_length %lx is too small\n", mpc_new_length); + goto out; + } + } + assign_to_mpc_intsrc(&mp_irqs[i], m); + mpc->mpc_length = count; + mpt += sizeof(struct mpc_config_intsrc); + } + print_mp_irq_info(&mp_irqs[i]); + } +#endif +out: + /* update checksum */ + mpc->mpc_checksum = 0; + mpc->mpc_checksum -= mpf_checksum((unsigned char *)mpc, + mpc->mpc_length); + + return 0; +} + +int __initdata enable_update_mptable; + +static int __init update_mptable_setup(char *str) +{ + enable_update_mptable = 1; + return 0; +} +early_param("update_mptable", update_mptable_setup); + +static unsigned long __initdata mpc_new_phys; +static unsigned long mpc_new_length __initdata = 4096; + +/* alloc_mptable or alloc_mptable=4k */ +static int __initdata alloc_mptable; +static int __init parse_alloc_mptable_opt(char *p) +{ + enable_update_mptable = 1; + alloc_mptable = 1; + if (!p) + return 0; + mpc_new_length = memparse(p, &p); + return 0; +} +early_param("alloc_mptable", parse_alloc_mptable_opt); + +void __init early_reserve_e820_mpc_new(void) +{ + if (enable_update_mptable && alloc_mptable) { + u64 startt = 0; +#ifdef CONFIG_X86_TRAMPOLINE + startt = TRAMPOLINE_BASE; +#endif + mpc_new_phys = early_reserve_e820(startt, mpc_new_length, 4); + } +} + +static int __init update_mp_table(void) +{ + char str[16]; + char oem[10]; + struct intel_mp_floating *mpf; + struct mp_config_table *mpc; + struct mp_config_table *mpc_new; + + if (!enable_update_mptable) + return 0; + + mpf = mpf_found; + if (!mpf) + return 0; + + /* + * Now see if we need to go further. + */ + if (mpf->mpf_feature1 != 0) + return 0; + + if (!mpf->mpf_physptr) + return 0; + + mpc = phys_to_virt(mpf->mpf_physptr); + + if (!smp_check_mpc(mpc, oem, str)) + return 0; + + printk(KERN_INFO "mpf: %lx\n", virt_to_phys(mpf)); + printk(KERN_INFO "mpf_physptr: %x\n", mpf->mpf_physptr); + + if (mpc_new_phys && mpc->mpc_length > mpc_new_length) { + mpc_new_phys = 0; + printk(KERN_INFO "mpc_new_length is %ld, please use alloc_mptable=8k\n", + mpc_new_length); + } + + if (!mpc_new_phys) { + unsigned char old, new; + /* check if we can change the postion */ + mpc->mpc_checksum = 0; + old = mpf_checksum((unsigned char *)mpc, mpc->mpc_length); + mpc->mpc_checksum = 0xff; + new = mpf_checksum((unsigned char *)mpc, mpc->mpc_length); + if (old == new) { + printk(KERN_INFO "mpc is readonly, please try alloc_mptable instead\n"); + return 0; + } + printk(KERN_INFO "use in-positon replacing\n"); + } else { + mpf->mpf_physptr = mpc_new_phys; + mpc_new = phys_to_virt(mpc_new_phys); + memcpy(mpc_new, mpc, mpc->mpc_length); + mpc = mpc_new; + /* check if we can modify that */ + if (mpc_new_phys - mpf->mpf_physptr) { + struct intel_mp_floating *mpf_new; + /* steal 16 bytes from [0, 1k) */ + printk(KERN_INFO "mpf new: %x\n", 0x400 - 16); + mpf_new = phys_to_virt(0x400 - 16); + memcpy(mpf_new, mpf, 16); + mpf = mpf_new; + mpf->mpf_physptr = mpc_new_phys; + } + mpf->mpf_checksum = 0; + mpf->mpf_checksum -= mpf_checksum((unsigned char *)mpf, 16); + printk(KERN_INFO "mpf_physptr new: %x\n", mpf->mpf_physptr); + } + + /* + * only replace the one with mp_INT and + * MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, + * already in mp_irqs , stored by ... and mp_config_acpi_gsi, + * may need pci=routeirq for all coverage + */ + replace_intsrc_all(mpc, mpc_new_phys, mpc_new_length); + + return 0; +} + +late_initcall(update_mp_table); diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 89e6cca5d693..978a0d637f3f 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -56,6 +56,7 @@ #include #include