redonkable
/
remarkable-linux
1
0
Fork 0
Code Releases Activity

Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux 

Pull more i2c updates from Wolfram Sang:
 "Included are two bugfixes needing some bigger refactoring (sh_mobile:
  deferred probe with DMA, mv64xxx: fix offload support) and one
  deprecated driver removal I thought would go in via ppc but I
  misunderstood.  It has a proper ack from BenH"

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: sh_mobile: fix uninitialized var when debug is enabled
  macintosh: therm_pm72: delete deprecated driver
  i2c: sh_mobile: I2C_SH_MOBILE should depend on HAS_DMA
  i2c: sh_mobile: rework deferred probing
  i2c: sh_mobile: refactor DMA setup
  i2c: mv64xxx: rework offload support to fix several problems
  i2c: mv64xxx: use BIT() macro for register value definitions
wifi-calibration
Linus Torvalds 2014-12-20 13:52:52 -08:00
parent cdce6ac277 fe07adec73
commit a4e1328a9d
7 changed files with 253 additions and 2805 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
drivers/i2c/busses/Kconfig
View File

@ -753,6 +753,7 @@ config I2C_SH7760
config I2C_SH_MOBILE
tristate "SuperH Mobile I2C Controller"
depends on HAS_DMA
depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
help
If you say yes to this option, support will be included for the

330
drivers/i2c/busses/i2c-mv64xxx.c
View File

@ -30,12 +30,12 @@
#define MV64XXX_I2C_BAUD_DIV_N(val) (val & 0x7)
#define MV64XXX_I2C_BAUD_DIV_M(val) ((val & 0xf) << 3)
#define MV64XXX_I2C_REG_CONTROL_ACK 0x00000004
#define MV64XXX_I2C_REG_CONTROL_IFLG 0x00000008
#define MV64XXX_I2C_REG_CONTROL_STOP 0x00000010
#define MV64XXX_I2C_REG_CONTROL_START 0x00000020
#define MV64XXX_I2C_REG_CONTROL_TWSIEN 0x00000040
#define MV64XXX_I2C_REG_CONTROL_INTEN 0x00000080
#define MV64XXX_I2C_REG_CONTROL_ACK BIT(2)
#define MV64XXX_I2C_REG_CONTROL_IFLG BIT(3)
#define MV64XXX_I2C_REG_CONTROL_STOP BIT(4)
#define MV64XXX_I2C_REG_CONTROL_START BIT(5)
#define MV64XXX_I2C_REG_CONTROL_TWSIEN BIT(6)
#define MV64XXX_I2C_REG_CONTROL_INTEN BIT(7)
/* Ctlr status values */
#define MV64XXX_I2C_STATUS_BUS_ERR 0x00
@ -68,19 +68,17 @@
#define MV64XXX_I2C_REG_BRIDGE_TIMING 0xe0
/* Bridge Control values */
#define MV64XXX_I2C_BRIDGE_CONTROL_WR 0x00000001
#define MV64XXX_I2C_BRIDGE_CONTROL_RD 0x00000002
#define MV64XXX_I2C_BRIDGE_CONTROL_WR BIT(0)
#define MV64XXX_I2C_BRIDGE_CONTROL_RD BIT(1)
#define MV64XXX_I2C_BRIDGE_CONTROL_ADDR_SHIFT 2
#define MV64XXX_I2C_BRIDGE_CONTROL_ADDR_EXT 0x00001000
#define MV64XXX_I2C_BRIDGE_CONTROL_ADDR_EXT BIT(12)
#define MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT 13
#define MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT 16
#define MV64XXX_I2C_BRIDGE_CONTROL_ENABLE 0x00080000
#define MV64XXX_I2C_BRIDGE_CONTROL_ENABLE BIT(19)
#define MV64XXX_I2C_BRIDGE_CONTROL_REPEATED_START BIT(20)
/* Bridge Status values */
#define MV64XXX_I2C_BRIDGE_STATUS_ERROR 0x00000001
#define MV64XXX_I2C_STATUS_OFFLOAD_ERROR 0xf0000001
#define MV64XXX_I2C_STATUS_OFFLOAD_OK 0xf0000000
#define MV64XXX_I2C_BRIDGE_STATUS_ERROR BIT(0)
/* Driver states */
enum {
@ -99,14 +97,12 @@ enum {
MV64XXX_I2C_ACTION_INVALID,
MV64XXX_I2C_ACTION_CONTINUE,
MV64XXX_I2C_ACTION_SEND_RESTART,
MV64XXX_I2C_ACTION_OFFLOAD_RESTART,
MV64XXX_I2C_ACTION_SEND_ADDR_1,
MV64XXX_I2C_ACTION_SEND_ADDR_2,
MV64XXX_I2C_ACTION_SEND_DATA,
MV64XXX_I2C_ACTION_RCV_DATA,
MV64XXX_I2C_ACTION_RCV_DATA_STOP,
MV64XXX_I2C_ACTION_SEND_STOP,
MV64XXX_I2C_ACTION_OFFLOAD_SEND_STOP,
};
struct mv64xxx_i2c_regs {
@ -193,75 +189,6 @@ mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data,
}
}
static int mv64xxx_i2c_offload_msg(struct mv64xxx_i2c_data *drv_data)
{
unsigned long data_reg_hi = 0;
unsigned long data_reg_lo = 0;
unsigned long ctrl_reg;
struct i2c_msg *msg = drv_data->msgs;
if (!drv_data->offload_enabled)
return -EOPNOTSUPP;
/* Only regular transactions can be offloaded */
if ((msg->flags & ~(I2C_M_TEN | I2C_M_RD)) != 0)
return -EINVAL;
/* Only 1-8 byte transfers can be offloaded */
if (msg->len < 1 || msg->len > 8)
return -EINVAL;
/* Build transaction */
ctrl_reg = MV64XXX_I2C_BRIDGE_CONTROL_ENABLE |
(msg->addr << MV64XXX_I2C_BRIDGE_CONTROL_ADDR_SHIFT);
if ((msg->flags & I2C_M_TEN) != 0)
ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_ADDR_EXT;
if ((msg->flags & I2C_M_RD) == 0) {
u8 local_buf[8] = { 0 };
memcpy(local_buf, msg->buf, msg->len);
data_reg_lo = cpu_to_le32(*((u32 *)local_buf));
data_reg_hi = cpu_to_le32(*((u32 *)(local_buf+4)));
ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_WR |
(msg->len - 1) << MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT;
writel(data_reg_lo,
drv_data->reg_base + MV64XXX_I2C_REG_TX_DATA_LO);
writel(data_reg_hi,
drv_data->reg_base + MV64XXX_I2C_REG_TX_DATA_HI);
} else {
ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_RD |
(msg->len - 1) << MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT;
}
/* Execute transaction */
writel(ctrl_reg, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL);
return 0;
}
static void
mv64xxx_i2c_update_offload_data(struct mv64xxx_i2c_data *drv_data)
{
struct i2c_msg *msg = drv_data->msg;
if (msg->flags & I2C_M_RD) {
u32 data_reg_lo = readl(drv_data->reg_base +
MV64XXX_I2C_REG_RX_DATA_LO);
u32 data_reg_hi = readl(drv_data->reg_base +
MV64XXX_I2C_REG_RX_DATA_HI);
u8 local_buf[8] = { 0 };
*((u32 *)local_buf) = le32_to_cpu(data_reg_lo);
*((u32 *)(local_buf+4)) = le32_to_cpu(data_reg_hi);
memcpy(msg->buf, local_buf, msg->len);
}
}
/*
*****************************************************************************
*
@ -389,16 +316,6 @@ mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
drv_data->rc = -ENXIO;
break;
case MV64XXX_I2C_STATUS_OFFLOAD_OK:
if (drv_data->send_stop || drv_data->aborting) {
drv_data->action = MV64XXX_I2C_ACTION_OFFLOAD_SEND_STOP;
drv_data->state = MV64XXX_I2C_STATE_IDLE;
} else {
drv_data->action = MV64XXX_I2C_ACTION_OFFLOAD_RESTART;
drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_RESTART;
}
break;
default:
dev_err(&drv_data->adapter.dev,
"mv64xxx_i2c_fsm: Ctlr Error -- state: 0x%x, "
@ -419,25 +336,15 @@ static void mv64xxx_i2c_send_start(struct mv64xxx_i2c_data *drv_data)
drv_data->aborting = 0;
drv_data->rc = 0;
/* Can we offload this msg ? */
if (mv64xxx_i2c_offload_msg(drv_data) < 0) {
/* No, switch to standard path */
mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs);
writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START,
drv_data->reg_base + drv_data->reg_offsets.control);
}
mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs);
writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START,
drv_data->reg_base + drv_data->reg_offsets.control);
}
static void
mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
{
switch(drv_data->action) {
case MV64XXX_I2C_ACTION_OFFLOAD_RESTART:
mv64xxx_i2c_update_offload_data(drv_data);
writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL);
writel(0, drv_data->reg_base +
MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
/* FALLTHRU */
case MV64XXX_I2C_ACTION_SEND_RESTART:
/* We should only get here if we have further messages */
BUG_ON(drv_data->num_msgs == 0);
@ -518,18 +425,73 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
drv_data->block = 0;
wake_up(&drv_data->waitq);
break;
case MV64XXX_I2C_ACTION_OFFLOAD_SEND_STOP:
mv64xxx_i2c_update_offload_data(drv_data);
writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL);
writel(0, drv_data->reg_base +
MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
drv_data->block = 0;
wake_up(&drv_data->waitq);
break;
}
}
static void
mv64xxx_i2c_read_offload_rx_data(struct mv64xxx_i2c_data *drv_data,
struct i2c_msg *msg)
{
u32 buf[2];
buf[0] = readl(drv_data->reg_base + MV64XXX_I2C_REG_RX_DATA_LO);
buf[1] = readl(drv_data->reg_base + MV64XXX_I2C_REG_RX_DATA_HI);
memcpy(msg->buf, buf, msg->len);
}
static int
mv64xxx_i2c_intr_offload(struct mv64xxx_i2c_data *drv_data)
{
u32 cause, status;
cause = readl(drv_data->reg_base +
MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
if (!cause)
return IRQ_NONE;
status = readl(drv_data->reg_base +
MV64XXX_I2C_REG_BRIDGE_STATUS);
if (status & MV64XXX_I2C_BRIDGE_STATUS_ERROR) {
drv_data->rc = -EIO;
goto out;
}
drv_data->rc = 0;
/*
* Transaction is a one message read transaction, read data
* for this message.
*/
if (drv_data->num_msgs == 1 && drv_data->msgs[0].flags & I2C_M_RD) {
mv64xxx_i2c_read_offload_rx_data(drv_data, drv_data->msgs);
drv_data->msgs++;
drv_data->num_msgs--;
}
/*
* Transaction is a two messages write/read transaction, read
* data for the second (read) message.
*/
else if (drv_data->num_msgs == 2 &&
!(drv_data->msgs[0].flags & I2C_M_RD) &&
drv_data->msgs[1].flags & I2C_M_RD) {
mv64xxx_i2c_read_offload_rx_data(drv_data, drv_data->msgs + 1);
drv_data->msgs += 2;
drv_data->num_msgs -= 2;
}
out:
writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL);
writel(0, drv_data->reg_base +
MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
drv_data->block = 0;
wake_up(&drv_data->waitq);
return IRQ_HANDLED;
}
static irqreturn_t
mv64xxx_i2c_intr(int irq, void *dev_id)
{
@ -540,20 +502,9 @@ mv64xxx_i2c_intr(int irq, void *dev_id)
spin_lock_irqsave(&drv_data->lock, flags);
if (drv_data->offload_enabled) {
while (readl(drv_data->reg_base +
MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE)) {
int reg_status = readl(drv_data->reg_base +
MV64XXX_I2C_REG_BRIDGE_STATUS);
if (reg_status & MV64XXX_I2C_BRIDGE_STATUS_ERROR)
status = MV64XXX_I2C_STATUS_OFFLOAD_ERROR;
else
status = MV64XXX_I2C_STATUS_OFFLOAD_OK;
mv64xxx_i2c_fsm(drv_data, status);
mv64xxx_i2c_do_action(drv_data);
rc = IRQ_HANDLED;
}
}
if (drv_data->offload_enabled)
rc = mv64xxx_i2c_intr_offload(drv_data);
while (readl(drv_data->reg_base + drv_data->reg_offsets.control) &
MV64XXX_I2C_REG_CONTROL_IFLG) {
status = readl(drv_data->reg_base + drv_data->reg_offsets.status);
@ -635,6 +586,117 @@ mv64xxx_i2c_execute_msg(struct mv64xxx_i2c_data *drv_data, struct i2c_msg *msg,
return drv_data->rc;
}
static void
mv64xxx_i2c_prepare_tx(struct mv64xxx_i2c_data *drv_data)
{
struct i2c_msg *msg = drv_data->msgs;
u32 buf[2];
memcpy(buf, msg->buf, msg->len);
writel(buf[0], drv_data->reg_base + MV64XXX_I2C_REG_TX_DATA_LO);
writel(buf[1], drv_data->reg_base + MV64XXX_I2C_REG_TX_DATA_HI);
}
static int
mv64xxx_i2c_offload_xfer(struct mv64xxx_i2c_data *drv_data)
{
struct i2c_msg *msgs = drv_data->msgs;
int num = drv_data->num_msgs;
unsigned long ctrl_reg;
unsigned long flags;
spin_lock_irqsave(&drv_data->lock, flags);
/* Build transaction */
ctrl_reg = MV64XXX_I2C_BRIDGE_CONTROL_ENABLE |
(msgs[0].addr << MV64XXX_I2C_BRIDGE_CONTROL_ADDR_SHIFT);
if (msgs[0].flags & I2C_M_TEN)
ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_ADDR_EXT;
/* Single write message transaction */
if (num == 1 && !(msgs[0].flags & I2C_M_RD)) {
size_t len = msgs[0].len - 1;
ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_WR |
(len << MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT);
mv64xxx_i2c_prepare_tx(drv_data);
}
/* Single read message transaction */
else if (num == 1 && msgs[0].flags & I2C_M_RD) {
size_t len = msgs[0].len - 1;
ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_RD |
(len << MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT);
}
/*
* Transaction with one write and one read message. This is
* guaranteed by the mv64xx_i2c_can_offload() checks.
*/
else if (num == 2) {
size_t lentx = msgs[0].len - 1;
size_t lenrx = msgs[1].len - 1;
ctrl_reg |=
MV64XXX_I2C_BRIDGE_CONTROL_RD |
MV64XXX_I2C_BRIDGE_CONTROL_WR |
(lentx << MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT) |
(lenrx << MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT) |
MV64XXX_I2C_BRIDGE_CONTROL_REPEATED_START;
mv64xxx_i2c_prepare_tx(drv_data);
}
/* Execute transaction */
drv_data->block = 1;
writel(ctrl_reg, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL);
spin_unlock_irqrestore(&drv_data->lock, flags);
mv64xxx_i2c_wait_for_completion(drv_data);
return drv_data->rc;
}
static bool
mv64xxx_i2c_valid_offload_sz(struct i2c_msg *msg)
{
return msg->len <= 8 && msg->len >= 1;
}
static bool
mv64xxx_i2c_can_offload(struct mv64xxx_i2c_data *drv_data)
{
struct i2c_msg *msgs = drv_data->msgs;
int num = drv_data->num_msgs;
return false;
if (!drv_data->offload_enabled)
return false;
/*
* We can offload a transaction consisting of a single
* message, as long as the message has a length between 1 and
* 8 bytes.
*/
if (num == 1 && mv64xxx_i2c_valid_offload_sz(msgs))
return true;
/*
* We can offload a transaction consisting of two messages, if
* the first is a write and a second is a read, and both have
* a length between 1 and 8 bytes.
*/
if (num == 2 &&
mv64xxx_i2c_valid_offload_sz(msgs) &&
mv64xxx_i2c_valid_offload_sz(msgs + 1) &&
!(msgs[0].flags & I2C_M_RD) &&
msgs[1].flags & I2C_M_RD)
return true;
return false;
}
/*
*****************************************************************************
*
@ -658,7 +720,11 @@ mv64xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
drv_data->msgs = msgs;
drv_data->num_msgs = num;
rc = mv64xxx_i2c_execute_msg(drv_data, &msgs[0], num == 1);
if (mv64xxx_i2c_can_offload(drv_data))
rc = mv64xxx_i2c_offload_xfer(drv_data);
else
rc = mv64xxx_i2c_execute_msg(drv_data, &msgs[0], num == 1);
if (rc < 0)
ret = rc;

112
drivers/i2c/busses/i2c-sh_mobile.c
View File

@ -140,6 +140,7 @@ struct sh_mobile_i2c_data {
int sr;
bool send_stop;
struct resource *res;
struct dma_chan *dma_tx;
struct dma_chan *dma_rx;
struct scatterlist sg;
@ -539,6 +540,42 @@ static void sh_mobile_i2c_dma_callback(void *data)
iic_set_clr(pd, ICIC, 0, ICIC_TDMAE | ICIC_RDMAE);
}
static struct dma_chan *sh_mobile_i2c_request_dma_chan(struct device *dev,
enum dma_transfer_direction dir, dma_addr_t port_addr)
{
struct dma_chan *chan;
struct dma_slave_config cfg;
char *chan_name = dir == DMA_MEM_TO_DEV ? "tx" : "rx";
int ret;
chan = dma_request_slave_channel_reason(dev, chan_name);
if (IS_ERR(chan)) {
ret = PTR_ERR(chan);
dev_dbg(dev, "request_channel failed for %s (%d)\n", chan_name, ret);
return chan;
}
memset(&cfg, 0, sizeof(cfg));
cfg.direction = dir;
if (dir == DMA_MEM_TO_DEV) {
cfg.dst_addr = port_addr;
cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
} else {
cfg.src_addr = port_addr;
cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
}
ret = dmaengine_slave_config(chan, &cfg);
if (ret) {
dev_dbg(dev, "slave_config failed for %s (%d)\n", chan_name, ret);
dma_release_channel(chan);
return ERR_PTR(ret);
}
dev_dbg(dev, "got DMA channel for %s\n", chan_name);
return chan;
}
static void sh_mobile_i2c_xfer_dma(struct sh_mobile_i2c_data *pd)
{
bool read = pd->msg->flags & I2C_M_RD;
@ -548,7 +585,16 @@ static void sh_mobile_i2c_xfer_dma(struct sh_mobile_i2c_data *pd)
dma_addr_t dma_addr;
dma_cookie_t cookie;
if (!chan)
if (PTR_ERR(chan) == -EPROBE_DEFER) {
if (read)
chan = pd->dma_rx = sh_mobile_i2c_request_dma_chan(pd->dev, DMA_DEV_TO_MEM,
pd->res->start + ICDR);
else
chan = pd->dma_tx = sh_mobile_i2c_request_dma_chan(pd->dev, DMA_MEM_TO_DEV,
pd->res->start + ICDR);
}
if (IS_ERR(chan))
return;
dma_addr = dma_map_single(chan->device->dev, pd->msg->buf, pd->msg->len, dir);
@ -747,56 +793,16 @@ static const struct of_device_id sh_mobile_i2c_dt_ids[] = {
};
MODULE_DEVICE_TABLE(of, sh_mobile_i2c_dt_ids);
static int sh_mobile_i2c_request_dma_chan(struct device *dev, enum dma_transfer_direction dir,
dma_addr_t port_addr, struct dma_chan **chan_ptr)
{
struct dma_chan *chan;
struct dma_slave_config cfg;
char *chan_name = dir == DMA_MEM_TO_DEV ? "tx" : "rx";
int ret;
*chan_ptr = NULL;
chan = dma_request_slave_channel_reason(dev, chan_name);
if (IS_ERR(chan)) {
ret = PTR_ERR(chan);
dev_dbg(dev, "request_channel failed for %s (%d)\n", chan_name, ret);
return ret;
}
memset(&cfg, 0, sizeof(cfg));
cfg.direction = dir;
if (dir == DMA_MEM_TO_DEV) {
cfg.dst_addr = port_addr;
cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
} else {
cfg.src_addr = port_addr;
cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
}
ret = dmaengine_slave_config(chan, &cfg);
if (ret) {
dev_dbg(dev, "slave_config failed for %s (%d)\n", chan_name, ret);
dma_release_channel(chan);
return ret;
}
*chan_ptr = chan;
dev_dbg(dev, "got DMA channel for %s\n", chan_name);
return 0;
}
static void sh_mobile_i2c_release_dma(struct sh_mobile_i2c_data *pd)
{
if (pd->dma_tx) {
if (!IS_ERR(pd->dma_tx)) {
dma_release_channel(pd->dma_tx);
pd->dma_tx = NULL;
pd->dma_tx = ERR_PTR(-EPROBE_DEFER);
}
if (pd->dma_rx) {
if (!IS_ERR(pd->dma_rx)) {
dma_release_channel(pd->dma_rx);
pd->dma_rx = NULL;
pd->dma_rx = ERR_PTR(-EPROBE_DEFER);
}
}
@ -849,6 +855,7 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
pd->res = res;
pd->reg = devm_ioremap_resource(&dev->dev, res);
if (IS_ERR(pd->reg))
return PTR_ERR(pd->reg);
@ -889,17 +896,7 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
/* Init DMA */
sg_init_table(&pd->sg, 1);
pd->dma_direction = DMA_NONE;
ret = sh_mobile_i2c_request_dma_chan(pd->dev, DMA_DEV_TO_MEM,
res->start + ICDR, &pd->dma_rx);
if (ret == -EPROBE_DEFER)
return ret;
ret = sh_mobile_i2c_request_dma_chan(pd->dev, DMA_MEM_TO_DEV,
res->start + ICDR, &pd->dma_tx);
if (ret == -EPROBE_DEFER) {
sh_mobile_i2c_release_dma(pd);
return ret;
}
pd->dma_rx = pd->dma_tx = ERR_PTR(-EPROBE_DEFER);
/* Enable Runtime PM for this device.
*
@ -937,8 +934,7 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
return ret;
}
dev_info(&dev->dev, "I2C adapter %d, bus speed %lu Hz, DMA=%c\n",
adap->nr, pd->bus_speed, (pd->dma_rx || pd->dma_tx) ? 'y' : 'n');
dev_info(&dev->dev, "I2C adapter %d, bus speed %lu Hz\n", adap->nr, pd->bus_speed);
return 0;
}

10
drivers/macintosh/Kconfig
View File

@ -204,16 +204,6 @@ config THERM_ADT746X
iBook G4, and the ATI based aluminium PowerBooks, allowing slightly
better fan behaviour by default, and some manual control.
config THERM_PM72
tristate "Support for thermal management on PowerMac G5 (AGP)"
depends on I2C && I2C_POWERMAC && PPC_PMAC64
default n
help
This driver provides thermostat and fan control for the desktop
G5 machines.
This is deprecated, use windfarm instead.
config WINDFARM
tristate "New PowerMac thermal control infrastructure"
depends on PPC

1
drivers/macintosh/Makefile
View File

@ -25,7 +25,6 @@ obj-$(CONFIG_ADB_IOP) += adb-iop.o
obj-$(CONFIG_ADB_PMU68K) += via-pmu68k.o
obj-$(CONFIG_ADB_MACIO) += macio-adb.o
obj-$(CONFIG_THERM_PM72) += therm_pm72.o
obj-$(CONFIG_THERM_WINDTUNNEL) += therm_windtunnel.o
obj-$(CONFIG_THERM_ADT746X) += therm_adt746x.o
obj-$(CONFIG_WINDFARM) += windfarm_core.o

2278
drivers/macintosh/therm_pm72.c
View File

File diff suppressed because it is too large Load Diff

326
drivers/macintosh/therm_pm72.h
View File

@ -1,326 +0,0 @@
#ifndef __THERM_PMAC_7_2_H__
#define __THERM_PMAC_7_2_H__
typedef unsigned short fu16;
typedef int fs32;
typedef short fs16;
struct mpu_data
{
u8 signature; /* 0x00 - EEPROM sig. */
u8 bytes_used; /* 0x01 - Bytes used in eeprom (160 ?) */
u8 size; /* 0x02 - EEPROM size (256 ?) */
u8 version; /* 0x03 - EEPROM version */
u32 data_revision; /* 0x04 - Dataset revision */
u8 processor_bin_code[3]; /* 0x08 - Processor BIN code */
u8 bin_code_expansion; /* 0x0b - ??? (padding ?) */
u8 processor_num; /* 0x0c - Number of CPUs on this MPU */
u8 input_mul_bus_div; /* 0x0d - Clock input multiplier/bus divider */
u8 reserved1[2]; /* 0x0e - */
u32 input_clk_freq_high; /* 0x10 - Input clock frequency high */
u8 cpu_nb_target_cycles; /* 0x14 - ??? */
u8 cpu_statlat; /* 0x15 - ??? */
u8 cpu_snooplat; /* 0x16 - ??? */
u8 cpu_snoopacc; /* 0x17 - ??? */
u8 nb_paamwin; /* 0x18 - ??? */
u8 nb_statlat; /* 0x19 - ??? */
u8 nb_snooplat; /* 0x1a - ??? */
u8 nb_snoopwin; /* 0x1b - ??? */
u8 api_bus_mode; /* 0x1c - ??? */
u8 reserved2[3]; /* 0x1d - */
u32 input_clk_freq_low; /* 0x20 - Input clock frequency low */
u8 processor_card_slot; /* 0x24 - Processor card slot number */
u8 reserved3[2]; /* 0x25 - */
u8 padjmax; /* 0x27 - Max power adjustment (Not in OF!) */
u8 ttarget; /* 0x28 - Target temperature */
u8 tmax; /* 0x29 - Max temperature */
u8 pmaxh; /* 0x2a - Max power */
u8 tguardband; /* 0x2b - Guardband temp ??? Hist. len in OSX */
fs32 pid_gp; /* 0x2c - PID proportional gain */
fs32 pid_gr; /* 0x30 - PID reset gain */
fs32 pid_gd; /* 0x34 - PID derivative gain */
fu16 voph; /* 0x38 - Vop High */
fu16 vopl; /* 0x3a - Vop Low */
fs16 nactual_die; /* 0x3c - nActual Die */
fs16 nactual_heatsink; /* 0x3e - nActual Heatsink */
fs16 nactual_system; /* 0x40 - nActual System */
u16 calibration_flags; /* 0x42 - Calibration flags */
fu16 mdiode; /* 0x44 - Diode M value (scaling factor) */
fs16 bdiode; /* 0x46 - Diode B value (offset) */
fs32 theta_heat_sink; /* 0x48 - Theta heat sink */
u16 rminn_intake_fan; /* 0x4c - Intake fan min RPM */
u16 rmaxn_intake_fan; /* 0x4e - Intake fan max RPM */
u16 rminn_exhaust_fan; /* 0x50 - Exhaust fan min RPM */
u16 rmaxn_exhaust_fan; /* 0x52 - Exhaust fan max RPM */
u8 processor_part_num[8]; /* 0x54 - Processor part number XX pumps min/max */
u32 processor_lot_num; /* 0x5c - Processor lot number */
u8 orig_card_sernum[0x10]; /* 0x60 - Card original serial number */
u8 curr_card_sernum[0x10]; /* 0x70 - Card current serial number */
u8 mlb_sernum[0x18]; /* 0x80 - MLB serial number */
u32 checksum1; /* 0x98 - */
u32 checksum2; /* 0x9c - */
}; /* Total size = 0xa0 */
/* Display a 16.16 fixed point value */
#define FIX32TOPRINT(f) ((f) >> 16),((((f) & 0xffff) * 1000) >> 16)
/*
* Maximum number of seconds to be in critical state (after a
* normal shutdown attempt). If the machine isn't down after
* this counter elapses, we force an immediate machine power
* off.
*/
#define MAX_CRITICAL_STATE 30
static char * critical_overtemp_path = "/sbin/critical_overtemp";
/*
* This option is "weird" :) Basically, if you define this to 1
* the control loop for the RPMs fans (not PWMs) will apply the
* correction factor obtained from the PID to the _actual_ RPM
* speed read from the FCU.
* If you define the below constant to 0, then it will be
* applied to the setpoint RPM speed, that is basically the
* speed we proviously "asked" for.
*
* I'm not sure which of these Apple's algorithm is supposed
* to use
*/
#define RPM_PID_USE_ACTUAL_SPEED 0
/*
* i2c IDs. Currently, we hard code those and assume that
* the FCU is on U3 bus 1 while all sensors are on U3 bus
* 0. This appear to be safe enough for this first version
* of the driver, though I would accept any clean patch
* doing a better use of the device-tree without turning the
* while i2c registration mechanism into a racy mess
*
* Note: Xserve changed this. We have some bits on the K2 bus,
* which I arbitrarily set to 0x200. Ultimately, we really want
* too lookup these in the device-tree though
*/
#define FAN_CTRLER_ID 0x15e
#define SUPPLY_MONITOR_ID 0x58
#define SUPPLY_MONITORB_ID 0x5a
#define DRIVES_DALLAS_ID 0x94
#define BACKSIDE_MAX_ID 0x98
#define XSERVE_DIMMS_LM87 0x25a
#define XSERVE_SLOTS_LM75 0x290
/*
* Some MAX6690, DS1775, LM87 register definitions
*/
#define MAX6690_INT_TEMP 0
#define MAX6690_EXT_TEMP 1
#define DS1775_TEMP 0
#define LM87_INT_TEMP 0x27
/*
* Scaling factors for the AD7417 ADC converters (except
* for the CPU diode which is obtained from the EEPROM).
* Those values are obtained from the property list of
* the darwin driver
*/
#define ADC_12V_CURRENT_SCALE 0x0320 /* _AD2 */
#define ADC_CPU_VOLTAGE_SCALE 0x00a0 /* _AD3 */
#define ADC_CPU_CURRENT_SCALE 0x1f40 /* _AD4 */
/*
* PID factors for the U3/Backside fan control loop. We have 2 sets
* of values here, one set for U3 and one set for U3H
*/
#define BACKSIDE_FAN_PWM_DEFAULT_ID 1
#define BACKSIDE_FAN_PWM_INDEX 0
#define BACKSIDE_PID_U3_G_d 0x02800000
#define BACKSIDE_PID_U3H_G_d 0x01400000
#define BACKSIDE_PID_RACK_G_d 0x00500000
#define BACKSIDE_PID_G_p 0x00500000
#define BACKSIDE_PID_RACK_G_p 0x0004cccc
#define BACKSIDE_PID_G_r 0x00000000
#define BACKSIDE_PID_U3_INPUT_TARGET 0x00410000
#define BACKSIDE_PID_U3H_INPUT_TARGET 0x004b0000
#define BACKSIDE_PID_RACK_INPUT_TARGET 0x00460000
#define BACKSIDE_PID_INTERVAL 5
#define BACKSIDE_PID_RACK_INTERVAL 1
#define BACKSIDE_PID_OUTPUT_MAX 100
#define BACKSIDE_PID_U3_OUTPUT_MIN 20
#define BACKSIDE_PID_U3H_OUTPUT_MIN 20
#define BACKSIDE_PID_HISTORY_SIZE 2
struct basckside_pid_params
{
s32 G_d;
s32 G_p;
s32 G_r;
s32 input_target;
s32 output_min;
s32 output_max;
s32 interval;
int additive;
};
struct backside_pid_state
{
int ticks;
struct i2c_client * monitor;
s32 sample_history[BACKSIDE_PID_HISTORY_SIZE];
s32 error_history[BACKSIDE_PID_HISTORY_SIZE];
int cur_sample;
s32 last_temp;
int pwm;
int first;
};
/*
* PID factors for the Drive Bay fan control loop
*/
#define DRIVES_FAN_RPM_DEFAULT_ID 2
#define DRIVES_FAN_RPM_INDEX 1
#define DRIVES_PID_G_d 0x01e00000
#define DRIVES_PID_G_p 0x00500000
#define DRIVES_PID_G_r 0x00000000
#define DRIVES_PID_INPUT_TARGET 0x00280000
#define DRIVES_PID_INTERVAL 5
#define DRIVES_PID_OUTPUT_MAX 4000
#define DRIVES_PID_OUTPUT_MIN 300
#define DRIVES_PID_HISTORY_SIZE 2
struct drives_pid_state
{
int ticks;
struct i2c_client * monitor;
s32 sample_history[BACKSIDE_PID_HISTORY_SIZE];
s32 error_history[BACKSIDE_PID_HISTORY_SIZE];
int cur_sample;
s32 last_temp;
int rpm;
int first;
};
#define SLOTS_FAN_PWM_DEFAULT_ID 2
#define SLOTS_FAN_PWM_INDEX 2
#define SLOTS_FAN_DEFAULT_PWM 40 /* Do better here ! */
/*
* PID factors for the Xserve DIMM control loop
*/
#define DIMM_PID_G_d 0
#define DIMM_PID_G_p 0
#define DIMM_PID_G_r 0x06553600
#define DIMM_PID_INPUT_TARGET 3276800
#define DIMM_PID_INTERVAL 1
#define DIMM_PID_OUTPUT_MAX 14000
#define DIMM_PID_OUTPUT_MIN 4000
#define DIMM_PID_HISTORY_SIZE 20
struct dimm_pid_state
{
int ticks;
struct i2c_client * monitor;
s32 sample_history[DIMM_PID_HISTORY_SIZE];
s32 error_history[DIMM_PID_HISTORY_SIZE];
int cur_sample;
s32 last_temp;
int first;
int output;
};
/*
* PID factors for the Xserve Slots control loop
*/
#define SLOTS_PID_G_d 0
#define SLOTS_PID_G_p 0
#define SLOTS_PID_G_r 0x00100000
#define SLOTS_PID_INPUT_TARGET 3200000
#define SLOTS_PID_INTERVAL 1
#define SLOTS_PID_OUTPUT_MAX 100
#define SLOTS_PID_OUTPUT_MIN 20
#define SLOTS_PID_HISTORY_SIZE 20
struct slots_pid_state
{
int ticks;
struct i2c_client * monitor;
s32 sample_history[SLOTS_PID_HISTORY_SIZE];
s32 error_history[SLOTS_PID_HISTORY_SIZE];
int cur_sample;
s32 last_temp;
int first;
int pwm;
};
/* Desktops */
#define CPUA_INTAKE_FAN_RPM_DEFAULT_ID 3
#define CPUA_EXHAUST_FAN_RPM_DEFAULT_ID 4
#define CPUB_INTAKE_FAN_RPM_DEFAULT_ID 5
#define CPUB_EXHAUST_FAN_RPM_DEFAULT_ID 6
#define CPUA_INTAKE_FAN_RPM_INDEX 3
#define CPUA_EXHAUST_FAN_RPM_INDEX 4
#define CPUB_INTAKE_FAN_RPM_INDEX 5
#define CPUB_EXHAUST_FAN_RPM_INDEX 6
#define CPU_INTAKE_SCALE 0x0000f852
#define CPU_TEMP_HISTORY_SIZE 2
#define CPU_POWER_HISTORY_SIZE 10
#define CPU_PID_INTERVAL 1
#define CPU_MAX_OVERTEMP 90
#define CPUA_PUMP_RPM_INDEX 7
#define CPUB_PUMP_RPM_INDEX 8
#define CPU_PUMP_OUTPUT_MAX 3200
#define CPU_PUMP_OUTPUT_MIN 1250
/* Xserve */
#define CPU_A1_FAN_RPM_INDEX 9
#define CPU_A2_FAN_RPM_INDEX 10
#define CPU_A3_FAN_RPM_INDEX 11
#define CPU_B1_FAN_RPM_INDEX 12
#define CPU_B2_FAN_RPM_INDEX 13
#define CPU_B3_FAN_RPM_INDEX 14
struct cpu_pid_state
{
int index;
struct i2c_client * monitor;
struct mpu_data mpu;
int overtemp;
s32 temp_history[CPU_TEMP_HISTORY_SIZE];
int cur_temp;
s32 power_history[CPU_POWER_HISTORY_SIZE];
s32 error_history[CPU_POWER_HISTORY_SIZE];
int cur_power;
int count_power;
int rpm;
int intake_rpm;
s32 voltage;
s32 current_a;
s32 last_temp;
s32 last_power;
int first;
u8 adc_config;
s32 pump_min;
s32 pump_max;
};
/* Tickle FCU every 10 seconds */
#define FCU_TICKLE_TICKS 10
/*
* Driver state
*/
enum {
state_detached,
state_attaching,
state_attached,
state_detaching,
};
#endif /* __THERM_PMAC_7_2_H__ */