iio: accel: add support for the Domintech DMARD09 3-axis accelerometer
Minimal implementation of an IIO driver for the Domintech DMARD09 3-axis accelerometer. Only supports reading the x,y,z axes at the moment. Implementation based on the Android driver from the Acer Liquid E2 kernel sources. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This commit is contained in:
parent
b1b79f5327
commit
a4fa6509dd
|
@ -38,6 +38,7 @@ dallas,ds4510 CPU Supervisor with Nonvolatile Memory and Programmable I/O
|
|||
dallas,ds75 Digital Thermometer and Thermostat
|
||||
dlg,da9053 DA9053: flexible system level PMIC with multicore support
|
||||
dlg,da9063 DA9063: system PMIC for quad-core application processors
|
||||
domintech,dmard09 DMARD09: 3-axis Accelerometer
|
||||
epson,rx8010 I2C-BUS INTERFACE REAL TIME CLOCK MODULE
|
||||
epson,rx8025 High-Stability. I2C-Bus INTERFACE REAL TIME CLOCK MODULE
|
||||
epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE
|
||||
|
|
|
@ -61,6 +61,16 @@ config DMARD06
|
|||
To compile this driver as a module, choose M here: the
|
||||
module will be called dmard06.
|
||||
|
||||
config DMARD09
|
||||
tristate "Domintech DMARD09 3-axis Accelerometer Driver"
|
||||
depends on I2C
|
||||
help
|
||||
Say yes here to get support for the Domintech DMARD09 3-axis
|
||||
accelerometer.
|
||||
|
||||
Choosing M will build the driver as a module. If so, the module
|
||||
will be called dmard09.
|
||||
|
||||
config HID_SENSOR_ACCEL_3D
|
||||
depends on HID_SENSOR_HUB
|
||||
select IIO_BUFFER
|
||||
|
|
|
@ -9,6 +9,7 @@ obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o
|
|||
obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o
|
||||
obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o
|
||||
obj-$(CONFIG_DMARD06) += dmard06.o
|
||||
obj-$(CONFIG_DMARD09) += dmard09.o
|
||||
obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
|
||||
obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o
|
||||
obj-$(CONFIG_KXSD9) += kxsd9.o
|
||||
|
|
157
drivers/iio/accel/dmard09.c
Normal file
157
drivers/iio/accel/dmard09.c
Normal file
|
@ -0,0 +1,157 @@
|
|||
/*
|
||||
* IIO driver for the 3-axis accelerometer Domintech DMARD09.
|
||||
*
|
||||
* Copyright (c) 2016, Jelle van der Waa <jelle@vdwaa.nl>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms and conditions of the GNU General Public License,
|
||||
* version 2, as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope it will be useful, but WITHOUT
|
||||
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
||||
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||||
* more details.
|
||||
*/
|
||||
|
||||
#include <asm/unaligned.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/iio/iio.h>
|
||||
|
||||
#define DMARD09_DRV_NAME "dmard09"
|
||||
|
||||
#define DMARD09_REG_CHIPID 0x18
|
||||
#define DMARD09_REG_STAT 0x0A
|
||||
#define DMARD09_REG_X 0x0C
|
||||
#define DMARD09_REG_Y 0x0E
|
||||
#define DMARD09_REG_Z 0x10
|
||||
#define DMARD09_CHIPID 0x95
|
||||
|
||||
#define DMARD09_BUF_LEN 8
|
||||
#define DMARD09_AXIS_X 0
|
||||
#define DMARD09_AXIS_Y 1
|
||||
#define DMARD09_AXIS_Z 2
|
||||
#define DMARD09_AXIS_X_OFFSET ((DMARD09_AXIS_X + 1) * 2)
|
||||
#define DMARD09_AXIS_Y_OFFSET ((DMARD09_AXIS_Y + 1 )* 2)
|
||||
#define DMARD09_AXIS_Z_OFFSET ((DMARD09_AXIS_Z + 1) * 2)
|
||||
|
||||
struct dmard09_data {
|
||||
struct i2c_client *client;
|
||||
};
|
||||
|
||||
#define DMARD09_CHANNEL(_axis, offset) { \
|
||||
.type = IIO_ACCEL, \
|
||||
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
||||
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
||||
.modified = 1, \
|
||||
.address = offset, \
|
||||
.channel2 = IIO_MOD_##_axis, \
|
||||
}
|
||||
|
||||
static const struct iio_chan_spec dmard09_channels[] = {
|
||||
DMARD09_CHANNEL(X, DMARD09_AXIS_X_OFFSET),
|
||||
DMARD09_CHANNEL(Y, DMARD09_AXIS_Y_OFFSET),
|
||||
DMARD09_CHANNEL(Z, DMARD09_AXIS_Z_OFFSET),
|
||||
};
|
||||
|
||||
static int dmard09_read_raw(struct iio_dev *indio_dev,
|
||||
struct iio_chan_spec const *chan,
|
||||
int *val, int *val2, long mask)
|
||||
{
|
||||
struct dmard09_data *data = iio_priv(indio_dev);
|
||||
u8 buf[DMARD09_BUF_LEN];
|
||||
int ret;
|
||||
s16 accel;
|
||||
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_RAW:
|
||||
/*
|
||||
* Read from the DMAR09_REG_STAT register, since the chip
|
||||
* caches reads from the individual X, Y, Z registers.
|
||||
*/
|
||||
ret = i2c_smbus_read_i2c_block_data(data->client,
|
||||
DMARD09_REG_STAT,
|
||||
DMARD09_BUF_LEN, buf);
|
||||
if (ret < 0) {
|
||||
dev_err(&data->client->dev, "Error reading reg %d\n",
|
||||
DMARD09_REG_STAT);
|
||||
return ret;
|
||||
}
|
||||
|
||||
accel = get_unaligned_le16(&buf[chan->address]);
|
||||
|
||||
/* Remove lower 3 bits and sign extend */
|
||||
accel <<= 4;
|
||||
accel >>= 7;
|
||||
|
||||
*val = accel;
|
||||
|
||||
return IIO_VAL_INT;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
static const struct iio_info dmard09_info = {
|
||||
.driver_module = THIS_MODULE,
|
||||
.read_raw = dmard09_read_raw,
|
||||
};
|
||||
|
||||
static int dmard09_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
int ret;
|
||||
struct iio_dev *indio_dev;
|
||||
struct dmard09_data *data;
|
||||
|
||||
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
||||
if (!indio_dev) {
|
||||
dev_err(&client->dev, "iio allocation failed\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
data = iio_priv(indio_dev);
|
||||
data->client = client;
|
||||
|
||||
ret = i2c_smbus_read_byte_data(data->client, DMARD09_REG_CHIPID);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev, "Error reading chip id %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (ret != DMARD09_CHIPID) {
|
||||
dev_err(&client->dev, "Invalid chip id %d\n", ret);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
i2c_set_clientdata(client, indio_dev);
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->name = DMARD09_DRV_NAME;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->channels = dmard09_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(dmard09_channels);
|
||||
indio_dev->info = &dmard09_info;
|
||||
|
||||
return devm_iio_device_register(&client->dev, indio_dev);
|
||||
}
|
||||
|
||||
static const struct i2c_device_id dmard09_id[] = {
|
||||
{ "dmard09", 0},
|
||||
{ },
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(i2c, dmard09_id);
|
||||
|
||||
static struct i2c_driver dmard09_driver = {
|
||||
.driver = {
|
||||
.name = DMARD09_DRV_NAME
|
||||
},
|
||||
.probe = dmard09_probe,
|
||||
.id_table = dmard09_id,
|
||||
};
|
||||
|
||||
module_i2c_driver(dmard09_driver);
|
||||
|
||||
MODULE_AUTHOR("Jelle van der Waa <jelle@vdwaa.nl>");
|
||||
MODULE_DESCRIPTION("DMARD09 3-axis accelerometer driver");
|
||||
MODULE_LICENSE("GPL");
|
Loading…
Reference in a new issue