USB: export <linux/usb_gadgetfs> as <linux/usb/gadgetfs.h>

Make sure gadgetfs userspace interface is properly exported:

 - Move <linux/usb_gadgetfs.h> to <linux/usb/gadgetfs.h>;
 - Export it using Kbuild;
 - Add an #include guard;
 - Correct some internal documentation;
 - Update struct layout so it's the same on 32/64 bit kernels.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
David Brownell 2007-05-14 19:36:41 -07:00 committed by Greg Kroah-Hartman
parent 8234509c39
commit a5262dcfda
3 changed files with 17 additions and 10 deletions

View file

@ -37,7 +37,7 @@
#include <linux/device.h>
#include <linux/moduleparam.h>
#include <linux/usb_gadgetfs.h>
#include <linux/usb/gadgetfs.h>
#include <linux/usb_gadget.h>

View file

@ -1,5 +1,6 @@
unifdef-y += audio.h
unifdef-y += cdc.h
unifdef-y += ch9.h
unifdef-y += gadgetfs.h
unifdef-y += midi.h

View file

@ -1,3 +1,5 @@
#ifndef __LINUX_USB_GADGETFS_H
#define __LINUX_USB_GADGETFS_H
#include <asm/types.h>
#include <asm/ioctl.h>
@ -7,11 +9,12 @@
/*
* Filesystem based user-mode API to USB Gadget controller hardware
*
* Almost everything can be done with only read and write operations,
* Other than ep0 operations, most things are done by read() and write()
* on endpoint files found in one directory. They are configured by
* writing descriptors, and then may be used for normal stream style
* i/o requests. When ep0 is configured, the device can enumerate;
* when it's closed, the device disconnects from usb.
* when it's closed, the device disconnects from usb. Operations on
* ep0 require ioctl() operations.
*
* Configuration and device descriptors get written to /dev/gadget/$CHIP,
* which may then be used to read usb_gadgetfs_event structs. The driver
@ -21,9 +24,9 @@
*/
/*
* Events are delivered on the ep0 file descriptor, if the user mode driver
* Events are delivered on the ep0 file descriptor, when the user mode driver
* reads from this file descriptor after writing the descriptors. Don't
* stop polling this descriptor, if you write that kind of driver.
* stop polling this descriptor.
*/
enum usb_gadgetfs_event_type {
@ -36,8 +39,10 @@ enum usb_gadgetfs_event_type {
// and likely more !
};
/* NOTE: this structure must stay the same size and layout on
* both 32-bit and 64-bit kernels.
*/
struct usb_gadgetfs_event {
enum usb_gadgetfs_event_type type;
union {
// NOP, DISCONNECT, SUSPEND: nothing
// ... some hardware can't report disconnection
@ -46,19 +51,20 @@ struct usb_gadgetfs_event {
enum usb_device_speed speed;
// SETUP: packet; DATA phase i/o precedes next event
// (setup.bmRequestType & USB_DIR_IN) flags direction
// (setup.bmRequestType & USB_DIR_IN) flags direction
// ... includes SET_CONFIGURATION, SET_INTERFACE
struct usb_ctrlrequest setup;
} u;
enum usb_gadgetfs_event_type type;
};
/* endpoint ioctls */
/* IN transfers may be reported to the gadget driver as complete
* when the fifo is loaded, before the host reads the data;
* when the fifo is loaded, before the host reads the data;
* OUT transfers may be reported to the host's "client" driver as
* complete when they're sitting in the FIFO unread.
* complete when they're sitting in the FIFO unread.
* THIS returns how many bytes are "unclaimed" in the endpoint fifo
* (needed for precise fault handling, when the hardware allows it)
*/
@ -72,4 +78,4 @@ struct usb_gadgetfs_event {
*/
#define GADGETFS_CLEAR_HALT _IO('g',3)
#endif /* __LINUX_USB_GADGETFS_H */