redonkable
/
remarkable-linux
1
0
Fork 0
Code Releases Activity

ARM: dts: vf610-bk4: Fix qspi node description 

Before this change the device tree description of qspi node for
second memory on BK4 board was wrong (applicable to old, removed
fsl-quadspi.c driver).

As a result this memory was not recognized correctly when used
with the new spi-fsl-qspi.c driver.

From the dt-bindings:

"Required SPI slave node properties:
  - reg: There are two buses (A and B) with two chip selects each.
This encodes to which bus and CS the flash is connected:
<0>: Bus A, CS 0
<1>: Bus A, CS 1
<2>: Bus B, CS 0
<3>: Bus B, CS 1"

According to above with new driver the second SPI-NOR memory shall
have reg=<2> as it is connected to Bus B, CS 0.

Fixes: a67d2c52a8 ("ARM: dts: Add support for Liebherr's BK4 device (vf610 based)")
Suggested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
zero-colors
Lukasz Majewski 2019-07-31 16:11:51 +02:00 committed by Shawn Guo
parent 8d0148473d
commit a5580eb394
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
arch/arm/boot/dts/vf610-bk4.dts
View File

@ -246,13 +246,13 @@
reg = <0>;
};
n25q128a13_2: flash@1 {
n25q128a13_2: flash@2 {
compatible = "n25q128a13", "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <66000000>;
spi-rx-bus-width = <2>;
reg = <1>;
reg = <2>;
};
};