hwmon: (w83791d) add support for thermal cruise mode
Add support to set target temperature and tolerance for thermal cruise mode. Signed-off-by: Marc Hulsman <m.hulsman@tudelft.nl> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org>
This commit is contained in:
parent
b5938f8c4a
commit
a5a4598cd2
|
@ -77,6 +77,9 @@ readings can be divided by a programmable divider (1, 2, 4, 8, 16,
|
|||
|
||||
Each fan controlled is controlled by PWM. The PWM duty cycle can be read and
|
||||
set for each fan separately. Valid values range from 0 (stop) to 255 (full).
|
||||
PWM 1-3 support Thermal Cruise mode, in which the PWMs are automatically
|
||||
regulated to keep respectively temp 1-3 at a certain target temperature.
|
||||
See below for the description of the sysfs-interface.
|
||||
|
||||
The w83791d has a global bit used to enable beeping from the speaker when an
|
||||
alarm is triggered as well as a bitmask to enable or disable the beep for
|
||||
|
@ -116,9 +119,19 @@ chip-specific options are documented here.
|
|||
pwm[1-3]_enable - this file controls mode of fan/temperature control for
|
||||
fan 1-3. Fan/PWM 4-5 only support manual mode.
|
||||
* 1 Manual mode
|
||||
* 2 Thermal Cruise mode (no further support)
|
||||
* 2 Thermal Cruise mode
|
||||
* 3 Fan Speed Cruise mode (no further support)
|
||||
|
||||
temp[1-3]_target - defines the target temperature for Thermal Cruise mode.
|
||||
Unit: millidegree Celsius
|
||||
RW
|
||||
|
||||
temp[1-3]_tolerance - temperature tolerance for Thermal Cruise mode.
|
||||
Specifies an interval around the target temperature
|
||||
in which the fan speed is not changed.
|
||||
Unit: millidegree Celsius
|
||||
RW
|
||||
|
||||
Alarms bitmap vs. beep_mask bitmask
|
||||
------------------------------------
|
||||
For legacy code using the alarms and beep_mask files:
|
||||
|
@ -146,7 +159,3 @@ tart2 : alarms: 0x020000 beep_mask: 0x080000 <== mismatch
|
|||
tart3 : alarms: 0x040000 beep_mask: 0x100000 <== mismatch
|
||||
case_open : alarms: 0x001000 beep_mask: 0x001000
|
||||
global_enable: alarms: -------- beep_mask: 0x800000 (modified via beep_enable)
|
||||
|
||||
W83791D TODO:
|
||||
---------------
|
||||
Provide a patch for Thermal Cruise registers.
|
||||
|
|
|
@ -125,6 +125,17 @@ static const u8 W83791D_REG_PWM[NUMBER_OF_PWM] = {
|
|||
0xA1, /* PWM 5 duty cycle register in DataSheet */
|
||||
};
|
||||
|
||||
static const u8 W83791D_REG_TEMP_TARGET[3] = {
|
||||
0x85, /* PWM 1 target temperature for temp 1 */
|
||||
0x86, /* PWM 2 target temperature for temp 2 */
|
||||
0x96, /* PWM 3 target temperature for temp 3 */
|
||||
};
|
||||
|
||||
static const u8 W83791D_REG_TEMP_TOL[2] = {
|
||||
0x87, /* PWM 1/2 temperature tolerance */
|
||||
0x97, /* PWM 3 temperature tolerance */
|
||||
};
|
||||
|
||||
static const u8 W83791D_REG_FAN_CFG[2] = {
|
||||
0x84, /* FAN 1/2 configuration */
|
||||
0x95, /* FAN 3 configuration */
|
||||
|
@ -234,6 +245,15 @@ static u8 fan_to_reg(long rpm, int div)
|
|||
(val) < 0 ? ((val) - 250) / 500 * 128 : \
|
||||
((val) + 250) / 500 * 128)
|
||||
|
||||
/* for thermal cruise target temp, 7-bits, LSB = 1 degree Celsius */
|
||||
#define TARGET_TEMP_TO_REG(val) ((val) < 0 ? 0 : \
|
||||
(val) >= 127000 ? 127 : \
|
||||
((val) + 500) / 1000)
|
||||
|
||||
/* for thermal cruise temp tolerance, 4-bits, LSB = 1 degree Celsius */
|
||||
#define TOL_TEMP_TO_REG(val) ((val) < 0 ? 0 : \
|
||||
(val) >= 15000 ? 15 : \
|
||||
((val) + 500) / 1000)
|
||||
|
||||
#define BEEP_MASK_TO_REG(val) ((val) & 0xffffff)
|
||||
#define BEEP_MASK_FROM_REG(val) ((val) & 0xffffff)
|
||||
|
@ -290,6 +310,9 @@ struct w83791d_data {
|
|||
u8 pwm_enable[3]; /* pwm enable status for fan 1-3
|
||||
(fan 4-5 only support manual mode) */
|
||||
|
||||
u8 temp_target[3]; /* pwm 1-3 target temperature */
|
||||
u8 temp_tolerance[3]; /* pwm 1-3 temperature tolerance */
|
||||
|
||||
/* Misc */
|
||||
u32 alarms; /* realtime status register encoding,combined */
|
||||
u8 beep_enable; /* Global beep enable */
|
||||
|
@ -774,6 +797,110 @@ static struct sensor_device_attribute sda_pwmenable[] = {
|
|||
show_pwmenable, store_pwmenable, 2),
|
||||
};
|
||||
|
||||
/* For Smart Fan I / Thermal Cruise */
|
||||
static ssize_t show_temp_target(struct device *dev,
|
||||
struct device_attribute *attr, char *buf)
|
||||
{
|
||||
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
|
||||
struct w83791d_data *data = w83791d_update_device(dev);
|
||||
int nr = sensor_attr->index;
|
||||
return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp_target[nr]));
|
||||
}
|
||||
|
||||
static ssize_t store_temp_target(struct device *dev,
|
||||
struct device_attribute *attr, const char *buf, size_t count)
|
||||
{
|
||||
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
struct w83791d_data *data = i2c_get_clientdata(client);
|
||||
int nr = sensor_attr->index;
|
||||
unsigned long val;
|
||||
u8 target_mask;
|
||||
|
||||
if (strict_strtoul(buf, 10, &val))
|
||||
return -EINVAL;
|
||||
|
||||
mutex_lock(&data->update_lock);
|
||||
data->temp_target[nr] = TARGET_TEMP_TO_REG(val);
|
||||
target_mask = w83791d_read(client,
|
||||
W83791D_REG_TEMP_TARGET[nr]) & 0x80;
|
||||
w83791d_write(client, W83791D_REG_TEMP_TARGET[nr],
|
||||
data->temp_target[nr] | target_mask);
|
||||
mutex_unlock(&data->update_lock);
|
||||
return count;
|
||||
}
|
||||
|
||||
static struct sensor_device_attribute sda_temp_target[] = {
|
||||
SENSOR_ATTR(temp1_target, S_IWUSR | S_IRUGO,
|
||||
show_temp_target, store_temp_target, 0),
|
||||
SENSOR_ATTR(temp2_target, S_IWUSR | S_IRUGO,
|
||||
show_temp_target, store_temp_target, 1),
|
||||
SENSOR_ATTR(temp3_target, S_IWUSR | S_IRUGO,
|
||||
show_temp_target, store_temp_target, 2),
|
||||
};
|
||||
|
||||
static ssize_t show_temp_tolerance(struct device *dev,
|
||||
struct device_attribute *attr, char *buf)
|
||||
{
|
||||
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
|
||||
struct w83791d_data *data = w83791d_update_device(dev);
|
||||
int nr = sensor_attr->index;
|
||||
return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp_tolerance[nr]));
|
||||
}
|
||||
|
||||
static ssize_t store_temp_tolerance(struct device *dev,
|
||||
struct device_attribute *attr, const char *buf, size_t count)
|
||||
{
|
||||
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
struct w83791d_data *data = i2c_get_clientdata(client);
|
||||
int nr = sensor_attr->index;
|
||||
unsigned long val;
|
||||
u8 target_mask;
|
||||
u8 reg_idx = 0;
|
||||
u8 val_shift = 0;
|
||||
u8 keep_mask = 0;
|
||||
|
||||
if (strict_strtoul(buf, 10, &val))
|
||||
return -EINVAL;
|
||||
|
||||
switch (nr) {
|
||||
case 0:
|
||||
reg_idx = 0;
|
||||
val_shift = 0;
|
||||
keep_mask = 0xf0;
|
||||
break;
|
||||
case 1:
|
||||
reg_idx = 0;
|
||||
val_shift = 4;
|
||||
keep_mask = 0x0f;
|
||||
break;
|
||||
case 2:
|
||||
reg_idx = 1;
|
||||
val_shift = 0;
|
||||
keep_mask = 0xf0;
|
||||
break;
|
||||
}
|
||||
|
||||
mutex_lock(&data->update_lock);
|
||||
data->temp_tolerance[nr] = TOL_TEMP_TO_REG(val);
|
||||
target_mask = w83791d_read(client,
|
||||
W83791D_REG_TEMP_TOL[reg_idx]) & keep_mask;
|
||||
w83791d_write(client, W83791D_REG_TEMP_TOL[reg_idx],
|
||||
(data->temp_tolerance[nr] << val_shift) | target_mask);
|
||||
mutex_unlock(&data->update_lock);
|
||||
return count;
|
||||
}
|
||||
|
||||
static struct sensor_device_attribute sda_temp_tolerance[] = {
|
||||
SENSOR_ATTR(temp1_tolerance, S_IWUSR | S_IRUGO,
|
||||
show_temp_tolerance, store_temp_tolerance, 0),
|
||||
SENSOR_ATTR(temp2_tolerance, S_IWUSR | S_IRUGO,
|
||||
show_temp_tolerance, store_temp_tolerance, 1),
|
||||
SENSOR_ATTR(temp3_tolerance, S_IWUSR | S_IRUGO,
|
||||
show_temp_tolerance, store_temp_tolerance, 2),
|
||||
};
|
||||
|
||||
/* read/write the temperature1, includes measured value and limits */
|
||||
static ssize_t show_temp1(struct device *dev, struct device_attribute *devattr,
|
||||
char *buf)
|
||||
|
@ -1044,6 +1171,12 @@ static struct attribute *w83791d_attributes[] = {
|
|||
&sda_pwmenable[0].dev_attr.attr,
|
||||
&sda_pwmenable[1].dev_attr.attr,
|
||||
&sda_pwmenable[2].dev_attr.attr,
|
||||
&sda_temp_target[0].dev_attr.attr,
|
||||
&sda_temp_target[1].dev_attr.attr,
|
||||
&sda_temp_target[2].dev_attr.attr,
|
||||
&sda_temp_tolerance[0].dev_attr.attr,
|
||||
&sda_temp_tolerance[1].dev_attr.attr,
|
||||
&sda_temp_tolerance[2].dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
|
||||
|
@ -1404,6 +1537,21 @@ static struct w83791d_data *w83791d_update_device(struct device *dev)
|
|||
data->pwm_enable[1] = (reg_array_tmp[0] >> 4) & 0x03;
|
||||
data->pwm_enable[2] = (reg_array_tmp[1] >> 2) & 0x03;
|
||||
|
||||
/* Update PWM target temperature */
|
||||
for (i = 0; i < 3; i++) {
|
||||
data->temp_target[i] = w83791d_read(client,
|
||||
W83791D_REG_TEMP_TARGET[i]) & 0x7f;
|
||||
}
|
||||
|
||||
/* Update PWM temperature tolerance */
|
||||
for (i = 0; i < 2; i++) {
|
||||
reg_array_tmp[i] = w83791d_read(client,
|
||||
W83791D_REG_TEMP_TOL[i]);
|
||||
}
|
||||
data->temp_tolerance[0] = reg_array_tmp[0] & 0x0f;
|
||||
data->temp_tolerance[1] = (reg_array_tmp[0] >> 4) & 0x0f;
|
||||
data->temp_tolerance[2] = reg_array_tmp[1] & 0x0f;
|
||||
|
||||
/* Update the first temperature sensor */
|
||||
for (i = 0; i < 3; i++) {
|
||||
data->temp1[i] = w83791d_read(client,
|
||||
|
|
Loading…
Reference in a new issue