Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  OMAP3: PM: ensure IO wakeups are properly disabled
  omap: Fix omap_4430sdp_defconfig for make oldconfig
  omap: Use CONFIG_SMP for test_for_ipi and test_for_ltirq
  omap: Fix sev instruction usage for multi-omap
  OMAP3: Fix a cpu type check problem
  omap3: id: fix 3630 rev detection

arch/arm/configs/omap_4430sdp_defconfig

@@ -13,6 +13,9 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_OMAP=y
 CONFIG_ARCH_OMAP4=y
+# CONFIG_ARCH_OMAP2PLUS_TYPICAL is not set
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
 # CONFIG_OMAP_MUX is not set
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_DM_TIMER=y

arch/arm/mach-omap2/Makefile

@@ -25,6 +25,7 @@ obj-$(CONFIG_LOCAL_TIMERS)		+= timer-mpu.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= omap-hotplug.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap44xx-smc.o omap4-common.o
 
+AFLAGS_omap-headsmp.o			:=-Wa,-march=armv7-a
 AFLAGS_omap44xx-smc.o			:=-Wa,-march=armv7-a
 
 # Functions loaded to SRAM

arch/arm/mach-omap2/clock3xxx_data.c

@@ -3417,7 +3417,13 @@ int __init omap3xxx_clk_init(void)
 	struct omap_clk *c;
 	u32 cpu_clkflg = CK_3XXX;
 
-	if (cpu_is_omap34xx()) {
+	if (cpu_is_omap3517()) {
+		cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS;
+		cpu_clkflg |= CK_3517;
+	} else if (cpu_is_omap3505()) {
+		cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS;
+		cpu_clkflg |= CK_3505;
+	} else if (cpu_is_omap34xx()) {
 		cpu_mask = RATE_IN_3XXX;
 		cpu_clkflg |= CK_343X;
 
@@ -3432,12 +3438,6 @@ int __init omap3xxx_clk_init(void)
 			cpu_mask |= RATE_IN_3430ES2PLUS;
 			cpu_clkflg |= CK_3430ES2;
 		}
-	} else if (cpu_is_omap3517()) {
-		cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS;
-		cpu_clkflg |= CK_3517;
-	} else if (cpu_is_omap3505()) {
-		cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS;
-		cpu_clkflg |= CK_3505;
 	}
 
 	if (omap3_has_192mhz_clk())

arch/arm/mach-omap2/id.c

@@ -284,8 +284,8 @@ static void __init omap3_check_revision(void)
 		default:
 			omap_revision =  OMAP3630_REV_ES1_2;
 			omap_chip.oc |= CHIP_IS_OMAP3630ES1_2;
-			break;
 		}
+		break;
 	default:
 		/* Unknown default to latest silicon rev as default*/
 		omap_revision =  OMAP3630_REV_ES1_2;

arch/arm/mach-omap2/include/mach/entry-macro.S

@@ -177,7 +177,10 @@ omap_irq_base:	.word	0
 		cmpne   \irqnr, \tmp
 		cmpcs   \irqnr, \irqnr
 		.endm
+#endif
+#endif	/* MULTI_OMAP2 */
 
+#ifdef CONFIG_SMP
 		/* We assume that irqstat (the raw value of the IRQ acknowledge
 		 * register) is preserved from the macro above.
 		 * If there is an IPI, we immediately signal end of interrupt
@@ -205,8 +208,7 @@ omap_irq_base:	.word	0
 		streq	\irqstat, [\base, #GIC_CPU_EOI]
 		cmp	\tmp, #0
 		.endm
-#endif
-#endif	/* MULTI_OMAP2 */
+#endif	/* CONFIG_SMP */
 
 		.macro	irq_prio_table
 		.endm

arch/arm/mach-omap2/omap-smp.c

@@ -102,8 +102,7 @@ static void __init wakeup_secondary(void)
 	 * Send a 'sev' to wake the secondary core from WFE.
 	 * Drain the outstanding writes to memory
 	 */
-	dsb();
-	set_event();
+	dsb_sev();
 	mb();
 }
 

arch/arm/mach-omap2/pm34xx.c

@@ -480,7 +480,9 @@ void omap_sram_idle(void)
 	}
 
 	/* Disable IO-PAD and IO-CHAIN wakeup */
-	if (omap3_has_io_wakeup() && core_next_state < PWRDM_POWER_ON) {
+	if (omap3_has_io_wakeup() &&
+	    (per_next_state < PWRDM_POWER_ON ||
+	     core_next_state < PWRDM_POWER_ON)) {
 		prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
 		omap3_disable_io_chain();
 	}

arch/arm/plat-omap/include/plat/smp.h

@@ -19,13 +19,6 @@
 
 #include <asm/hardware/gic.h>
 
-/*
- * set_event() is used to wake up secondary core from wfe using sev. ROM
- * code puts the second core into wfe(standby).
- *
- */
-#define set_event()	__asm__ __volatile__ ("sev" : : : "memory")
-
 /* Needed for secondary core boot */
 extern void omap_secondary_startup(void);
 extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);