diff --git a/arch/cris/arch-v32/kernel/cacheflush.S b/arch/cris/arch-v32/kernel/cacheflush.S
index 956e8fb82f01..6fc3d95d7029 100644
--- a/arch/cris/arch-v32/kernel/cacheflush.S
+++ b/arch/cris/arch-v32/kernel/cacheflush.S
@@ -1,4 +1,5 @@
 	.global cris_flush_cache_range
+	.type	cris_flush_cache_range, @function
 cris_flush_cache_range:
 	move.d 1024, $r12
 	cmp.d $r11, $r12
@@ -80,8 +81,10 @@ cris_flush_1KB:
 	addq 32, $r10
 	ba cris_flush_cache_range
 	sub.d $r12, $r11
+	.size	cris_flush_cache_range, . - cris_flush_cache_range
 
 	.global cris_flush_cache
+	.type	cris_flush_cache, @function
 cris_flush_cache:
 	moveq 0, $r10
 cris_flush_line:
@@ -92,3 +95,5 @@ cris_flush_line:
 	fidxd [$r10]
 	ret
 	nop
+	.size	cris_flush_cache, . - cris_flush_cache
+
diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S
index 1f39861eac8c..7c14acb754a1 100644
--- a/arch/cris/arch-v32/kernel/entry.S
+++ b/arch/cris/arch-v32/kernel/entry.S
@@ -76,12 +76,15 @@ _need_resched:
 
 	; Called at exit from fork. schedule_tail must be called to drop
 	; spinlock if CONFIG_PREEMPT.
+	.type	ret_from_fork,@function
 ret_from_fork:
 	jsr schedule_tail
 	nop
 	ba  ret_from_sys_call
 	nop
+	.size	ret_from_fork, . - ret_from_fork
 
+	.type	ret_from_intr,@function
 ret_from_intr:
 	;; Check for resched if preemptive kernel, or if we're going back to
 	;; user-mode. This test matches the user_regs(regs) macro. Don't simply
@@ -91,9 +94,10 @@ ret_from_intr:
 	move.d	[$acr], $r0
 	btstq	16, $r0			; User-mode flag.
 	bpl	_resume_kernel
+	.size	ret_from_intr, . - ret_from_intr + 2	; +2 includes the dslot.
 
 	; Note that di below is in delay slot.
-
+	.type	_resume_userspace,@function
 _resume_userspace:
 	di			; So need_resched and sigpending don't change.
 
@@ -107,6 +111,7 @@ _resume_userspace:
 	nop
 	ba	_Rexit
 	nop
+	.size	_resume_userspace, . - _resume_userspace
 
 	;; The system_call is called by a BREAK instruction, which looks pretty
 	;; much like any other exception.
@@ -122,6 +127,7 @@ _resume_userspace:
 	;; non-used instructions. Only the non-common cases cause the outlined code
 	;; to run..
 
+	.type	system_call,@function
 system_call:
 	;; Stack-frame similar to the irq heads, which is reversed in
 	;; ret_from_sys_call.
@@ -217,7 +223,9 @@ ret_from_sys_call:
 	and.d	_TIF_ALLWORK_MASK, $r1
 	bne	_syscall_exit_work
 	nop
+	.size	system_call, . - system_call
 
+	.type	_Rexit,@function
 _Rexit:
 	;; This epilogue MUST match the prologues in multiple_interrupt, irq.h
 	;; and ptregs.h.
@@ -234,10 +242,12 @@ _Rexit:
 	addq    8, $sp		; Skip EXS, EDA.
 	jump	$erp
 	rfe			; Restore condition code stack in delay-slot.
+	.size	_Rexit, . - _Rexit
 
 	;; We get here after doing a syscall if extra work might need to be done
 	;; perform syscall exit tracing if needed.
 
+	.type	_syscall_exit_work,@function
 _syscall_exit_work:
 	;; R0 contains current at this point and irq's are disabled.
 
@@ -253,14 +263,18 @@ _syscall_exit_work:
 	move.d	$r1, $r9
 	ba	_resume_userspace
 	nop
+	.size	_syscall_exit_work, . - _syscall_exit_work
 
+	.type	_work_pending,@function
 _work_pending:
 	addoq	+TI_flags, $r0, $acr
 	move.d	[$acr], $r10
 	btstq	TIF_NEED_RESCHED, $r10	; Need resched?
 	bpl	_work_notifysig		; No, must be signal/notify.
 	nop
+	.size	_work_pending, . - _work_pending
 
+	.type	_work_resched,@function
 _work_resched:
 	move.d	$r9, $r1		; Preserve R9.
 	jsr	schedule
@@ -276,7 +290,9 @@ _work_resched:
 	btstq	TIF_NEED_RESCHED, $r1
 	bmi	_work_resched		; current->work.need_resched.
 	nop
+	.size	_work_resched, . - _work_resched
 
+	.type	_work_notifysig,@function
 _work_notifysig:
 	;; Deal with pending signals and notify-resume requests.
 
@@ -288,6 +304,7 @@ _work_notifysig:
 
 	ba _Rexit
 	nop
+	.size	_work_notifysig, . - _work_notifysig
 
 	;; We get here as a sidetrack when we've entered a syscall with the
 	;; trace-bit set. We need to call do_syscall_trace and then continue
@@ -329,6 +346,7 @@ _syscall_trace_entry:
 	;;
 	;; Returns old current in R10.
 
+	.type	resume,@function
 resume:
 	subq	4, $sp
 	move	$srp, [$sp]		; Keep old/new PC on the stack.
@@ -364,6 +382,7 @@ resume:
 	move.d	[$sp+], $acr
 	jump	$acr			; Restore PC.
 	nop
+	.size	resume, . - resume
 
 nmi_interrupt:
 
@@ -426,6 +445,7 @@ spurious_interrupt:
 	;; time. Jump to the first set interrupt bit in a priotiry fashion. The
 	;; hardware will call the unserved interrupts after the handler
 	;; finishes.
+	.type	multiple_interrupt, @function
 multiple_interrupt:
 	;; This prologue MUST match the one in irq.h and the struct in ptregs.h!
 	subq	12, $sp		; Skip EXS, EDA.
@@ -458,6 +478,7 @@ multiple_interrupt:
 	move.d	$sp, $r10
 	jump    ret_from_intr
 	nop
+	.size	multiple_interrupt, . - multiple_interrupt
 
 do_sigtrap:
 	;; Sigtraps the process that executed the BREAK instruction. Creates a
@@ -514,11 +535,13 @@ _ugdb_handle_exception:
 	move.d	[$sp+], $r0		; Restore R0 in delay slot.
 
 	.global kernel_execve
+	.type	kernel_execve,@function
 kernel_execve:
 	move.d __NR_execve, $r9
 	break 13
 	ret
 	nop
+	.size	kernel_execve, . - kernel_execve
 
 	.data