b43: Beaconing fixes

These are some beaconing related fixes. Basically it prevents
the card from triggering the beacon IRQ over and over again.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Michael Buesch 2008-04-04 21:40:06 +02:00 committed by John W. Linville
parent 182e2e66ca
commit a82d992261
2 changed files with 37 additions and 6 deletions

View file

@ -733,6 +733,7 @@ struct b43_wl {
struct sk_buff *current_beacon;
bool beacon0_uploaded;
bool beacon1_uploaded;
struct work_struct beacon_update_trigger;
/* The current QOS parameters for the 4 queues.
* This is protected by the irq_lock. */

View file

@ -1337,7 +1337,8 @@ static void b43_write_beacon_template(struct b43_wldev *dev,
b43warn(dev->wl, "Did not find a valid TIM IE in "
"the beacon template packet. AP or IBSS operation "
"may be broken.\n");
}
} else
b43dbg(dev->wl, "Updated beacon template\n");
}
static void b43_write_probe_resp_plcp(struct b43_wldev *dev,
@ -1447,6 +1448,27 @@ static void b43_write_probe_resp_template(struct b43_wldev *dev,
kfree(probe_resp_data);
}
static void b43_beacon_update_trigger_work(struct work_struct *work)
{
struct b43_wl *wl = container_of(work, struct b43_wl,
beacon_update_trigger);
struct b43_wldev *dev;
mutex_lock(&wl->mutex);
dev = wl->current_dev;
if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) {
/* Force the microcode to trigger the
* beacon update bottom-half IRQ. */
spin_lock_irq(&wl->irq_lock);
b43_write32(dev, B43_MMIO_MACCMD,
b43_read32(dev, B43_MMIO_MACCMD)
| B43_MACCMD_BEACON0_VALID
| B43_MACCMD_BEACON1_VALID);
spin_unlock_irq(&wl->irq_lock);
}
mutex_unlock(&wl->mutex);
}
/* Asynchronously update the packet templates in template RAM.
* Locking: Requires wl->irq_lock to be locked. */
static void b43_update_templates(struct b43_wl *wl, struct sk_buff *beacon)
@ -1462,6 +1484,7 @@ static void b43_update_templates(struct b43_wl *wl, struct sk_buff *beacon)
wl->current_beacon = beacon;
wl->beacon0_uploaded = 0;
wl->beacon1_uploaded = 0;
queue_work(wl->hw->workqueue, &wl->beacon_update_trigger);
}
static void b43_set_ssid(struct b43_wldev *dev, const u8 * ssid, u8 ssid_len)
@ -1487,18 +1510,20 @@ static void b43_set_beacon_int(struct b43_wldev *dev, u16 beacon_int)
{
b43_time_lock(dev);
if (dev->dev->id.revision >= 3) {
b43_write32(dev, 0x188, (beacon_int << 16));
b43_write32(dev, B43_MMIO_TSF_CFP_REP, (beacon_int << 16));
b43_write32(dev, B43_MMIO_TSF_CFP_START, (beacon_int << 10));
} else {
b43_write16(dev, 0x606, (beacon_int >> 6));
b43_write16(dev, 0x610, beacon_int);
}
b43_time_unlock(dev);
b43dbg(dev->wl, "Set beacon interval to %u\n", beacon_int);
}
static void handle_irq_beacon(struct b43_wldev *dev)
{
struct b43_wl *wl = dev->wl;
u32 cmd;
u32 cmd, beacon0_valid, beacon1_valid;
if (!b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
return;
@ -1506,7 +1531,11 @@ static void handle_irq_beacon(struct b43_wldev *dev)
/* This is the bottom half of the asynchronous beacon update. */
cmd = b43_read32(dev, B43_MMIO_MACCMD);
if (!(cmd & B43_MACCMD_BEACON0_VALID)) {
beacon0_valid = (cmd & B43_MACCMD_BEACON0_VALID);
beacon1_valid = (cmd & B43_MACCMD_BEACON1_VALID);
cmd &= ~(B43_MACCMD_BEACON0_VALID | B43_MACCMD_BEACON1_VALID);
if (!beacon0_valid) {
if (!wl->beacon0_uploaded) {
b43_write_beacon_template(dev, 0x68, 0x18,
B43_CCK_RATE_1MB);
@ -1515,8 +1544,7 @@ static void handle_irq_beacon(struct b43_wldev *dev)
wl->beacon0_uploaded = 1;
}
cmd |= B43_MACCMD_BEACON0_VALID;
}
if (!(cmd & B43_MACCMD_BEACON1_VALID)) {
} else if (!beacon1_valid) {
if (!wl->beacon1_uploaded) {
b43_write_beacon_template(dev, 0x468, 0x1A,
B43_CCK_RATE_1MB);
@ -4012,6 +4040,7 @@ static void b43_op_stop(struct ieee80211_hw *hw)
b43_rfkill_exit(dev);
cancel_work_sync(&(wl->qos_update_work));
cancel_work_sync(&(wl->beacon_update_trigger));
mutex_lock(&wl->mutex);
if (b43_status(dev) >= B43_STAT_STARTED)
@ -4389,6 +4418,7 @@ static int b43_wireless_init(struct ssb_device *dev)
mutex_init(&wl->mutex);
INIT_LIST_HEAD(&wl->devlist);
INIT_WORK(&wl->qos_update_work, b43_qos_update_work);
INIT_WORK(&wl->beacon_update_trigger, b43_beacon_update_trigger_work);
ssb_set_devtypedata(dev, wl);
b43info(wl, "Broadcom %04X WLAN found\n", dev->bus->chip_id);