Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (37 commits)
  SH: catch negative denormal_subf1() retval in denormal_add()
  sh: Fix DMAC base address for SH7709S
  sh: update smc91x platform data for se7206.
  sh: Stub in cpu_to_node() and friends for NUMA build.
  sh: intc register modify fix
  sh: no high level trigger on some sh3 cpus
  sh: clean up sh7710 and sh7720 intc tables
  sh: add interrupt ack code to sh3
  sh: unify external irq pin code for sh3
  sh-sci: avoid writing to nonexistent registers
  sh-sci: sh7722 lacks scsptr registers
  sh-sci: improve sh7722 support
  sh: reset hardware from early printk
  sh: drain and wait for early printk
  sh: use sci_out() for early printk
  sh: add memory resources to /proc/iomem
  sh: add kernel bss resource
  sh: fix sh7705 interrupt vector typo
  sh: update smc91x platform data for se7722
  sh: update smc91x platform data for MigoR
  ...
This commit is contained in:
Linus Torvalds 2008-05-09 08:07:58 -07:00
commit a9545ee3c8
63 changed files with 498 additions and 1793 deletions

View file

@ -448,14 +448,6 @@ config SH_DREAMCAST
Select Dreamcast if configuring for a SEGA Dreamcast.
More information at <http://www.linux-sh.org>
config SH_MPC1211
bool "Interface MPC1211"
depends on CPU_SUBTYPE_SH7751 && BROKEN
help
CTP/PCI-SH02 is a CPU module computer that is produced
by Interface Corporation.
More information at <http://www.interface.co.jp>
config SH_SH03
bool "Interface CTP/PCI-SH03"
depends on CPU_SUBTYPE_SH7751
@ -657,8 +649,7 @@ source "arch/sh/drivers/Kconfig"
endmenu
config ISA_DMA_API
def_bool y
depends on SH_MPC1211
bool
menu "Kernel features"
@ -666,7 +657,7 @@ source kernel/Kconfig.hz
config KEXEC
bool "kexec system call (EXPERIMENTAL)"
depends on EXPERIMENTAL
depends on SUPERH32 && EXPERIMENTAL
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
@ -683,7 +674,7 @@ config KEXEC
config CRASH_DUMP
bool "kernel crash dumps (EXPERIMENTAL)"
depends on EXPERIMENTAL
depends on SUPERH32 && EXPERIMENTAL
help
Generate crash dump after being started by kexec.
This should be normally only set in special crash dump kernels
@ -763,7 +754,7 @@ menu "Boot options"
config ZERO_PAGE_OFFSET
hex "Zero page offset"
default "0x00004000" if SH_MPC1211 || SH_SH03
default "0x00004000" if SH_SH03
default "0x00010000" if PAGE_SIZE_64KB
default "0x00002000" if PAGE_SIZE_8KB
default "0x00001000"

View file

@ -7,6 +7,7 @@ source "lib/Kconfig.debug"
config SH_STANDARD_BIOS
bool "Use LinuxSH standard BIOS"
depends on SUPERH32
help
Say Y here if your target has the gdb-sh-stub
package from www.m17n.org (or any conforming standard LinuxSH BIOS)

View file

@ -110,7 +110,6 @@ machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += se/7343
machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE) += se/7721
machdir-$(CONFIG_SH_HP6XX) += hp6xx
machdir-$(CONFIG_SH_DREAMCAST) += dreamcast
machdir-$(CONFIG_SH_MPC1211) += mpc1211
machdir-$(CONFIG_SH_SH03) += sh03
machdir-$(CONFIG_SH_SECUREEDGE5410) += snapgear
machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d

View file

@ -1,8 +0,0 @@
#
# Makefile for the Interface (CTP/PCI/MPC-SH02) specific parts of the kernel
#
obj-y := setup.o rtc.o
obj-$(CONFIG_PCI) += pci.o

View file

@ -1,295 +0,0 @@
/*
* Low-Level PCI Support for the MPC-1211(CTP/PCI/MPC-SH02)
*
* (c) 2002-2003 Saito.K & Jeanne
*
* Dustin McIntire (dustin@sensoria.com)
* Derived from arch/i386/kernel/pci-*.c which bore the message:
* (c) 1999--2000 Martin Mares <mj@ucw.cz>
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/errno.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <asm/machvec.h>
#include <asm/io.h>
#include <asm/mpc1211/pci.h>
static struct resource mpcpci_io_resource = {
"MPCPCI IO",
0x00000000,
0xffffffff,
IORESOURCE_IO
};
static struct resource mpcpci_mem_resource = {
"MPCPCI mem",
0x00000000,
0xffffffff,
IORESOURCE_MEM
};
static struct pci_ops pci_direct_conf1;
struct pci_channel board_pci_channels[] = {
{&pci_direct_conf1, &mpcpci_io_resource, &mpcpci_mem_resource, 0, 256},
{NULL, NULL, NULL, 0, 0},
};
/*
* Direct access to PCI hardware...
*/
#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
/*
* Functions for accessing PCI configuration space with type 1 accesses
*/
static int pci_conf1_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
{
u32 word;
unsigned long flags;
/*
* PCIPDR may only be accessed as 32 bit words,
* so we must do byte alignment by hand
*/
local_irq_save(flags);
writel(CONFIG_CMD(bus,devfn,where), PCIPAR);
word = readl(PCIPDR);
local_irq_restore(flags);
switch (size) {
case 1:
switch (where & 0x3) {
case 3:
*value = (u8)(word >> 24);
break;
case 2:
*value = (u8)(word >> 16);
break;
case 1:
*value = (u8)(word >> 8);
break;
default:
*value = (u8)word;
break;
}
break;
case 2:
switch (where & 0x3) {
case 3:
*value = (u16)(word >> 24);
local_irq_save(flags);
writel(CONFIG_CMD(bus,devfn,(where+1)), PCIPAR);
word = readl(PCIPDR);
local_irq_restore(flags);
*value |= ((word & 0xff) << 8);
break;
case 2:
*value = (u16)(word >> 16);
break;
case 1:
*value = (u16)(word >> 8);
break;
default:
*value = (u16)word;
break;
}
break;
case 4:
*value = word;
break;
}
PCIDBG(4,"pci_conf1_read@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),*value);
return PCIBIOS_SUCCESSFUL;
}
/*
* Since MPC-1211 only does 32bit access we'll have to do a read,mask,write operation.
* We'll allow an odd byte offset, though it should be illegal.
*/
static int pci_conf1_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
{
u32 word,mask = 0;
unsigned long flags;
u32 shift = (where & 3) * 8;
if(size == 1) {
mask = ((1 << 8) - 1) << shift; // create the byte mask
} else if(size == 2){
if(shift == 24)
return PCIBIOS_BAD_REGISTER_NUMBER;
mask = ((1 << 16) - 1) << shift; // create the word mask
}
local_irq_save(flags);
writel(CONFIG_CMD(bus,devfn,where), PCIPAR);
if(size == 4){
writel(value, PCIPDR);
local_irq_restore(flags);
PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),value);
return PCIBIOS_SUCCESSFUL;
}
word = readl(PCIPDR);
word &= ~mask;
word |= ((value << shift) & mask);
writel(word, PCIPDR);
local_irq_restore(flags);
PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),word);
return PCIBIOS_SUCCESSFUL;
}
#undef CONFIG_CMD
static struct pci_ops pci_direct_conf1 = {
.read = pci_conf1_read,
.write = pci_conf1_write,
};
static void __devinit quirk_ali_ide_ports(struct pci_dev *dev)
{
dev->resource[0].start = 0x1f0;
dev->resource[0].end = 0x1f7;
dev->resource[0].flags = IORESOURCE_IO;
dev->resource[1].start = 0x3f6;
dev->resource[1].end = 0x3f6;
dev->resource[1].flags = IORESOURCE_IO;
dev->resource[2].start = 0x170;
dev->resource[2].end = 0x177;
dev->resource[2].flags = IORESOURCE_IO;
dev->resource[3].start = 0x376;
dev->resource[3].end = 0x376;
dev->resource[3].flags = IORESOURCE_IO;
dev->resource[4].start = 0xf000;
dev->resource[4].end = 0xf00f;
dev->resource[4].flags = IORESOURCE_IO;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, quirk_ali_ide_ports);
char * __devinit pcibios_setup(char *str)
{
return str;
}
/*
* Called after each bus is probed, but before its children
* are examined.
*/
void __devinit pcibios_fixup_bus(struct pci_bus *b)
{
pci_read_bridge_bases(b);
}
/*
* IRQ functions
*/
static inline u8 bridge_swizzle(u8 pin, u8 slot)
{
return (((pin-1) + slot) % 4) + 1;
}
static inline u8 bridge_swizzle_pci_1(u8 pin, u8 slot)
{
return (((pin-1) - slot) & 3) + 1;
}
static u8 __init mpc1211_swizzle(struct pci_dev *dev, u8 *pinp)
{
unsigned long flags;
u8 pin = *pinp;
u32 word;
for ( ; dev->bus->self; dev = dev->bus->self) {
if (!pin)
continue;
if (dev->bus->number == 1) {
local_irq_save(flags);
writel(0x80000000 | 0x2c, PCIPAR);
word = readl(PCIPDR);
local_irq_restore(flags);
word >>= 16;
if (word == 0x0001)
pin = bridge_swizzle_pci_1(pin, PCI_SLOT(dev->devfn));
else
pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
} else
pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
}
*pinp = pin;
return PCI_SLOT(dev->devfn);
}
static int __init map_mpc1211_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
int irq = -1;
/* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */
if (dev->bus->number == 0) {
switch (slot) {
case 13: irq = 9; break; /* USB */
case 22: irq = 10; break; /* LAN */
default: irq = 0; break;
}
} else {
switch (pin) {
case 0: irq = 0; break;
case 1: irq = 7; break;
case 2: irq = 9; break;
case 3: irq = 10; break;
case 4: irq = 11; break;
}
}
if( irq < 0 ) {
PCIDBG(3, "PCI: Error mapping IRQ on device %s\n", pci_name(dev));
return irq;
}
PCIDBG(2, "Setting IRQ for slot %s to %d\n", pci_name(dev), irq);
return irq;
}
void __init pcibios_fixup_irqs(void)
{
pci_fixup_irqs(mpc1211_swizzle, map_mpc1211_irq);
}
void pcibios_align_resource(void *data, struct resource *res,
resource_size_t size, resource_size_t align)
{
resource_size_t start = res->start;
if (res->flags & IORESOURCE_IO) {
if (start >= 0x10000UL) {
if ((start & 0xffffUL) < 0x4000UL) {
start = (start & 0xffff0000UL) + 0x4000UL;
} else if ((start & 0xffffUL) >= 0xf000UL) {
start = (start & 0xffff0000UL) + 0x10000UL;
}
res->start = start;
} else {
if (start & 0x300) {
start = (start + 0x3ff) & ~0x3ff;
res->start = start;
}
}
}
}

View file

@ -1,136 +0,0 @@
/*
* linux/arch/sh/kernel/rtc-mpc1211.c -- MPC-1211 on-chip RTC support
*
* Copyright (C) 2002 Saito.K & Jeanne
*
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/time.h>
#include <linux/bcd.h>
#include <linux/mc146818rtc.h>
unsigned long get_cmos_time(void)
{
unsigned int year, mon, day, hour, min, sec;
spin_lock(&rtc_lock);
do {
sec = CMOS_READ(RTC_SECONDS);
min = CMOS_READ(RTC_MINUTES);
hour = CMOS_READ(RTC_HOURS);
day = CMOS_READ(RTC_DAY_OF_MONTH);
mon = CMOS_READ(RTC_MONTH);
year = CMOS_READ(RTC_YEAR);
} while (sec != CMOS_READ(RTC_SECONDS));
if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
BCD_TO_BIN(sec);
BCD_TO_BIN(min);
BCD_TO_BIN(hour);
BCD_TO_BIN(day);
BCD_TO_BIN(mon);
BCD_TO_BIN(year);
}
spin_unlock(&rtc_lock);
year += 1900;
if (year < 1970)
year += 100;
return mktime(year, mon, day, hour, min, sec);
}
void mpc1211_rtc_gettimeofday(struct timeval *tv)
{
tv->tv_sec = get_cmos_time();
tv->tv_usec = 0;
}
/* arc/i386/kernel/time.c */
/*
* In order to set the CMOS clock precisely, set_rtc_mmss has to be
* called 500 ms after the second nowtime has started, because when
* nowtime is written into the registers of the CMOS clock, it will
* jump to the next second precisely 500 ms later. Check the Motorola
* MC146818A or Dallas DS12887 data sheet for details.
*
* BUG: This routine does not handle hour overflow properly; it just
* sets the minutes. Usually you'll only notice that after reboot!
*/
static int set_rtc_mmss(unsigned long nowtime)
{
int retval = 0;
int real_seconds, real_minutes, cmos_minutes;
unsigned char save_control, save_freq_select;
/* gets recalled with irq locally disabled */
spin_lock(&rtc_lock);
save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
cmos_minutes = CMOS_READ(RTC_MINUTES);
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
BCD_TO_BIN(cmos_minutes);
/*
* since we're only adjusting minutes and seconds,
* don't interfere with hour overflow. This avoids
* messing with unknown time zones but requires your
* RTC not to be off by more than 15 minutes
*/
real_seconds = nowtime % 60;
real_minutes = nowtime / 60;
if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
real_minutes += 30; /* correct for half hour time zone */
real_minutes %= 60;
if (abs(real_minutes - cmos_minutes) < 30) {
if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
BIN_TO_BCD(real_seconds);
BIN_TO_BCD(real_minutes);
}
CMOS_WRITE(real_seconds,RTC_SECONDS);
CMOS_WRITE(real_minutes,RTC_MINUTES);
} else {
printk(KERN_WARNING
"set_rtc_mmss: can't update from %d to %d\n",
cmos_minutes, real_minutes);
retval = -1;
}
/* The following flags have to be released exactly in this order,
* otherwise the DS12887 (popular MC146818A clone with integrated
* battery and quartz) will not reset the oscillator and will not
* update precisely 500 ms later. You won't find this mentioned in
* the Dallas Semiconductor data sheets, but who believes data
* sheets anyway ... -- Markus Kuhn
*/
CMOS_WRITE(save_control, RTC_CONTROL);
CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
spin_unlock(&rtc_lock);
return retval;
}
int mpc1211_rtc_settimeofday(const struct timeval *tv)
{
unsigned long nowtime = tv->tv_sec;
return set_rtc_mmss(nowtime);
}
void mpc1211_time_init(void)
{
rtc_sh_get_time = mpc1211_rtc_gettimeofday;
rtc_sh_set_time = mpc1211_rtc_settimeofday;
}

View file

@ -1,347 +0,0 @@
/*
* linux/arch/sh/boards/mpc1211/setup.c
*
* Copyright (C) 2002 Saito.K & Jeanne, Fujii.Y
*
*/
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/machvec.h>
#include <asm/mpc1211/mpc1211.h>
#include <asm/mpc1211/pci.h>
#include <asm/mpc1211/m1543c.h>
/* ALI15X3 SMBus address offsets */
#define SMBHSTSTS (0 + 0x3100)
#define SMBHSTCNT (1 + 0x3100)
#define SMBHSTSTART (2 + 0x3100)
#define SMBHSTCMD (7 + 0x3100)
#define SMBHSTADD (3 + 0x3100)
#define SMBHSTDAT0 (4 + 0x3100)
#define SMBHSTDAT1 (5 + 0x3100)
#define SMBBLKDAT (6 + 0x3100)
/* Other settings */
#define MAX_TIMEOUT 500 /* times 1/100 sec */
/* ALI15X3 command constants */
#define ALI15X3_ABORT 0x04
#define ALI15X3_T_OUT 0x08
#define ALI15X3_QUICK 0x00
#define ALI15X3_BYTE 0x10
#define ALI15X3_BYTE_DATA 0x20
#define ALI15X3_WORD_DATA 0x30
#define ALI15X3_BLOCK_DATA 0x40
#define ALI15X3_BLOCK_CLR 0x80
/* ALI15X3 status register bits */
#define ALI15X3_STS_IDLE 0x04
#define ALI15X3_STS_BUSY 0x08
#define ALI15X3_STS_DONE 0x10
#define ALI15X3_STS_DEV 0x20 /* device error */
#define ALI15X3_STS_COLL 0x40 /* collision or no response */
#define ALI15X3_STS_TERM 0x80 /* terminated by abort */
#define ALI15X3_STS_ERR 0xE0 /* all the bad error bits */
static void __init pci_write_config(unsigned long busNo,
unsigned long devNo,
unsigned long fncNo,
unsigned long cnfAdd,
unsigned long cnfData)
{
ctrl_outl((0x80000000
+ ((busNo & 0xff) << 16)
+ ((devNo & 0x1f) << 11)
+ ((fncNo & 0x07) << 8)
+ (cnfAdd & 0xfc)), PCIPAR);
ctrl_outl(cnfData, PCIPDR);
}
/*
Initialize IRQ setting
*/
static unsigned char m_irq_mask = 0xfb;
static unsigned char s_irq_mask = 0xff;
static void disable_mpc1211_irq(unsigned int irq)
{
if( irq < 8) {
m_irq_mask |= (1 << irq);
outb(m_irq_mask,I8259_M_MR);
} else {
s_irq_mask |= (1 << (irq - 8));
outb(s_irq_mask,I8259_S_MR);
}
}
static void enable_mpc1211_irq(unsigned int irq)
{
if( irq < 8) {
m_irq_mask &= ~(1 << irq);
outb(m_irq_mask,I8259_M_MR);
} else {
s_irq_mask &= ~(1 << (irq - 8));
outb(s_irq_mask,I8259_S_MR);
}
}
static inline int mpc1211_irq_real(unsigned int irq)
{
int value;
int irqmask;
if ( irq < 8) {
irqmask = 1<<irq;
outb(0x0b,I8259_M_CR); /* ISR register */
value = inb(I8259_M_CR) & irqmask;
outb(0x0a,I8259_M_CR); /* back ro the IPR reg */
return value;
}
irqmask = 1<<(irq - 8);
outb(0x0b,I8259_S_CR); /* ISR register */
value = inb(I8259_S_CR) & irqmask;
outb(0x0a,I8259_S_CR); /* back ro the IPR reg */
return value;
}
static void mask_and_ack_mpc1211(unsigned int irq)
{
if(irq < 8) {
if(m_irq_mask & (1<<irq)){
if(!mpc1211_irq_real(irq)){
atomic_inc(&irq_err_count)
printk("spurious 8259A interrupt: IRQ %x\n",irq);
}
} else {
m_irq_mask |= (1<<irq);
}
inb(I8259_M_MR); /* DUMMY */
outb(m_irq_mask,I8259_M_MR); /* disable */
outb(0x60+irq,I8259_M_CR); /* EOI */
} else {
if(s_irq_mask & (1<<(irq - 8))){
if(!mpc1211_irq_real(irq)){
atomic_inc(&irq_err_count);
printk("spurious 8259A interrupt: IRQ %x\n",irq);
}
} else {
s_irq_mask |= (1<<(irq - 8));
}
inb(I8259_S_MR); /* DUMMY */
outb(s_irq_mask,I8259_S_MR); /* disable */
outb(0x60+(irq-8),I8259_S_CR); /* EOI */
outb(0x60+2,I8259_M_CR);
}
}
static void end_mpc1211_irq(unsigned int irq)
{
enable_mpc1211_irq(irq);
}
static unsigned int startup_mpc1211_irq(unsigned int irq)
{
enable_mpc1211_irq(irq);
return 0;
}
static void shutdown_mpc1211_irq(unsigned int irq)
{
disable_mpc1211_irq(irq);
}
static struct hw_interrupt_type mpc1211_irq_type = {
.typename = "MPC1211-IRQ",
.startup = startup_mpc1211_irq,
.shutdown = shutdown_mpc1211_irq,
.enable = enable_mpc1211_irq,
.disable = disable_mpc1211_irq,
.ack = mask_and_ack_mpc1211,
.end = end_mpc1211_irq
};
static void make_mpc1211_irq(unsigned int irq)
{
irq_desc[irq].chip = &mpc1211_irq_type;
irq_desc[irq].status = IRQ_DISABLED;
irq_desc[irq].action = 0;
irq_desc[irq].depth = 1;
disable_mpc1211_irq(irq);
}
int mpc1211_irq_demux(int irq)
{
unsigned int poll;
if( irq == 2 ) {
outb(0x0c,I8259_M_CR);
poll = inb(I8259_M_CR);
if(poll & 0x80) {
irq = (poll & 0x07);
}
if( irq == 2) {
outb(0x0c,I8259_S_CR);
poll = inb(I8259_S_CR);
irq = (poll & 0x07) + 8;
}
}
return irq;
}
static void __init init_mpc1211_IRQ(void)
{
int i;
/*
* Super I/O (Just mimic PC):
* 1: keyboard
* 3: serial 1
* 4: serial 0
* 5: printer
* 6: floppy
* 8: rtc
* 10: lan
* 12: mouse
* 14: ide0
* 15: ide1
*/
pci_write_config(0,0,0,0x54, 0xb0b0002d);
outb(0x11, I8259_M_CR); /* mater icw1 edge trigger */
outb(0x11, I8259_S_CR); /* slave icw1 edge trigger */
outb(0x20, I8259_M_MR); /* m icw2 base vec 0x08 */
outb(0x28, I8259_S_MR); /* s icw2 base vec 0x70 */
outb(0x04, I8259_M_MR); /* m icw3 slave irq2 */
outb(0x02, I8259_S_MR); /* s icw3 slave id */
outb(0x01, I8259_M_MR); /* m icw4 non buf normal eoi*/
outb(0x01, I8259_S_MR); /* s icw4 non buf normal eo1*/
outb(0xfb, I8259_M_MR); /* disable irq0--irq7 */
outb(0xff, I8259_S_MR); /* disable irq8--irq15 */
for ( i=0; i < 16; i++) {
if(i != 2) {
make_mpc1211_irq(i);
}
}
}
static void delay1000(void)
{
int i;
for (i=0; i<1000; i++)
ctrl_delay();
}
static int put_smb_blk(unsigned char *p, int address, int command, int no)
{
int temp;
int timeout;
int i;
outb(0xff, SMBHSTSTS);
temp = inb(SMBHSTSTS);
for (timeout = 0; (timeout < MAX_TIMEOUT) && !(temp & ALI15X3_STS_IDLE); timeout++) {
delay1000();
temp = inb(SMBHSTSTS);
}
if (timeout >= MAX_TIMEOUT){
return -1;
}
outb(((address & 0x7f) << 1), SMBHSTADD);
outb(0xc0, SMBHSTCNT);
outb(command & 0xff, SMBHSTCMD);
outb(no & 0x1f, SMBHSTDAT0);
for(i = 1; i <= no; i++) {
outb(*p++, SMBBLKDAT);
}
outb(0xff, SMBHSTSTART);
temp = inb(SMBHSTSTS);
for (timeout = 0; (timeout < MAX_TIMEOUT) && !(temp & (ALI15X3_STS_ERR | ALI15X3_STS_DONE)); timeout++) {
delay1000();
temp = inb(SMBHSTSTS);
}
if (timeout >= MAX_TIMEOUT) {
return -2;
}
if ( temp & ALI15X3_STS_ERR ){
return -3;
}
return 0;
}
static struct resource heartbeat_resources[] = {
[0] = {
.start = 0xa2000000,
.end = 0xa2000000,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
};
static struct platform_device *mpc1211_devices[] __initdata = {
&heartbeat_device,
};
static int __init mpc1211_devices_setup(void)
{
return platform_add_devices(mpc1211_devices,
ARRAY_SIZE(mpc1211_devices));
}
__initcall(mpc1211_devices_setup);
/* arch/sh/boards/mpc1211/rtc.c */
void mpc1211_time_init(void);
static void __init mpc1211_setup(char **cmdline_p)
{
unsigned char spd_buf[128];
__set_io_port_base(PA_PCI_IO);
pci_write_config(0,0,0,0x54, 0xb0b00000);
do {
outb(ALI15X3_ABORT, SMBHSTCNT);
spd_buf[0] = 0x0c;
spd_buf[1] = 0x43;
spd_buf[2] = 0x7f;
spd_buf[3] = 0x03;
spd_buf[4] = 0x00;
spd_buf[5] = 0x03;
spd_buf[6] = 0x00;
} while (put_smb_blk(spd_buf, 0x69, 0, 7) < 0);
board_time_init = mpc1211_time_init;
return 0;
}
/*
* The Machine Vector
*/
static struct sh_machine_vector mv_mpc1211 __initmv = {
.mv_name = "Interface MPC-1211(CTP/PCI/MPC-SH02)",
.mv_setup = mpc1211_setup,
.mv_nr_irqs = 48,
.mv_irq_demux = mpc1211_irq_demux,
.mv_init_irq = init_mpc1211_IRQ,
};

View file

@ -14,6 +14,7 @@
#include <linux/mtd/physmap.h>
#include <linux/mtd/nand.h>
#include <linux/i2c.h>
#include <linux/smc91x.h>
#include <asm/machvec.h>
#include <asm/io.h>
#include <asm/sh_keysc.h>
@ -27,6 +28,11 @@
* 0x18000000 8GB 8 NAND Flash (K9K8G08U0A)
*/
static struct smc91x_platdata smc91x_info = {
.flags = SMC91X_USE_16BIT,
.irq_flags = IRQF_TRIGGER_HIGH,
};
static struct resource smc91x_eth_resources[] = {
[0] = {
.name = "SMC91C111" ,
@ -36,7 +42,7 @@ static struct resource smc91x_eth_resources[] = {
},
[1] = {
.start = 32, /* IRQ0 */
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
.flags = IORESOURCE_IRQ,
},
};
@ -44,6 +50,9 @@ static struct platform_device smc91x_eth_device = {
.name = "smc91x",
.num_resources = ARRAY_SIZE(smc91x_eth_resources),
.resource = smc91x_eth_resources,
.dev = {
.platform_data = &smc91x_info,
},
};
static struct sh_keysc_info sh_keysc_info = {

View file

@ -62,7 +62,7 @@ static unsigned char irl2irq[HL_NR_IRL] __initdata = {
static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors,
NULL, mask_registers, NULL, NULL);
unsigned char * __init highlander_init_irq_r7780mp(void)
unsigned char * __init highlander_plat_irq_setup(void)
{
if ((ctrl_inw(0xa4000700) & 0xf000) == 0x2000) {
printk(KERN_INFO "Using r7780mp interrupt controller.\n");

View file

@ -55,7 +55,7 @@ static unsigned char irl2irq[HL_NR_IRL] __initdata = {
static DECLARE_INTC_DESC(intc_desc, "r7780rp", vectors,
NULL, mask_registers, NULL, NULL);
unsigned char * __init highlander_init_irq_r7780rp(void)
unsigned char * __init highlander_plat_irq_setup(void)
{
if (ctrl_inw(0xa5000600)) {
printk(KERN_INFO "Using r7780rp interrupt controller.\n");

View file

@ -64,7 +64,7 @@ static unsigned char irl2irq[HL_NR_IRL] __initdata = {
static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors,
NULL, mask_registers, NULL, NULL);
unsigned char * __init highlander_init_irq_r7785rp(void)
unsigned char * __init highlander_plat_irq_setup(void)
{
if ((ctrl_inw(0xa4000158) & 0xf000) != 0x1000)
return NULL;

View file

@ -316,7 +316,7 @@ static void __init highlander_setup(char **cmdline_p)
static unsigned char irl2irq[HL_NR_IRL];
int highlander_irq_demux(int irq)
static int highlander_irq_demux(int irq)
{
if (irq >= HL_NR_IRL || !irl2irq[irq])
return irq;
@ -324,27 +324,9 @@ int highlander_irq_demux(int irq)
return irl2irq[irq];
}
void __init highlander_init_irq(void)
static void __init highlander_init_irq(void)
{
unsigned char *ucp = NULL;
do {
#ifdef CONFIG_SH_R7780MP
ucp = highlander_init_irq_r7780mp();
if (ucp)
break;
#endif
#ifdef CONFIG_SH_R7785RP
ucp = highlander_init_irq_r7785rp();
if (ucp)
break;
#endif
#ifdef CONFIG_SH_R7780RP
ucp = highlander_init_irq_r7780rp();
if (ucp)
break;
#endif
} while (0);
unsigned char *ucp = highlander_plat_irq_setup();
if (ucp) {
plat_irq_setup_pins(IRQ_MODE_IRL3210);

View file

@ -109,7 +109,6 @@ static struct platform_device heartbeat_device = {
.resource = heartbeat_resources,
};
#ifdef CONFIG_MFD_SM501
static struct plat_serial8250_port uart_platform_data[] = {
{
.membase = (void __iomem *)0xb3e30000,
@ -208,13 +207,9 @@ static struct platform_device sm501_device = {
.resource = sm501_resources,
};
#endif /* CONFIG_MFD_SM501 */
static struct platform_device *rts7751r2d_devices[] __initdata = {
#ifdef CONFIG_MFD_SM501
&uart_device,
&sm501_device,
#endif
&heartbeat_device,
&spi_sh_sci_device,
};
@ -234,7 +229,9 @@ static int __init rts7751r2d_devices_setup(void)
{
if (register_trapped_io(&cf_trapped_io) == 0)
platform_device_register(&cf_ide_device);
spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
return platform_add_devices(rts7751r2d_devices,
ARRAY_SIZE(rts7751r2d_devices));
}

View file

@ -3,12 +3,13 @@
* linux/arch/sh/boards/se/7206/setup.c
*
* Copyright (C) 2006 Yoshinori Sato
* Copyright (C) 2007 Paul Mundt
* Copyright (C) 2007 - 2008 Paul Mundt
*
* Hitachi 7206 SolutionEngine Support.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/smc91x.h>
#include <asm/se7206.h>
#include <asm/io.h>
#include <asm/machvec.h>
@ -16,8 +17,9 @@
static struct resource smc91x_resources[] = {
[0] = {
.start = 0x300,
.end = 0x300 + 0x020 - 1,
.name = "smc91x-regs",
.start = PA_SMSC + 0x300,
.end = PA_SMSC + 0x300 + 0x020 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@ -27,9 +29,18 @@ static struct resource smc91x_resources[] = {
},
};
static struct smc91x_platdata smc91x_info = {
.flags = SMC91X_USE_16BIT,
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = -1,
.dev = {
.dma_mask = NULL,
.coherent_dma_mask = 0xffffffff,
.platform_data = &smc91x_info,
},
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};

View file

@ -14,6 +14,7 @@
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/input.h>
#include <linux/smc91x.h>
#include <asm/machvec.h>
#include <asm/se7722.h>
#include <asm/io.h>
@ -44,6 +45,10 @@ static struct platform_device heartbeat_device = {
};
/* SMC91x */
static struct smc91x_platdata smc91x_info = {
.flags = SMC91X_USE_16BIT,
};
static struct resource smc91x_eth_resources[] = {
[0] = {
.name = "smc91x-regs" ,
@ -64,6 +69,7 @@ static struct platform_device smc91x_eth_device = {
.dev = {
.dma_mask = NULL, /* don't use dma */
.coherent_dma_mask = 0xffffffff,
.platform_data = &smc91x_info,
},
.num_resources = ARRAY_SIZE(smc91x_eth_resources),
.resource = smc91x_eth_resources,

View file

@ -6,7 +6,6 @@
targets := vmlinux vmlinux.bin vmlinux.bin.gz \
head_32.o misc_32.o piggy.o
EXTRA_AFLAGS := -traditional
OBJECTS = $(obj)/head_32.o $(obj)/misc_32.o

View file

@ -13,7 +13,6 @@
targets := vmlinux vmlinux.bin vmlinux.bin.gz \
head_64.o misc_64.o cache.o piggy.o
EXTRA_AFLAGS := -traditional
OBJECTS := $(obj)/vmlinux_64.lds $(obj)/head_64.o $(obj)/misc_64.o \
$(obj)/cache.o

View file

@ -184,9 +184,8 @@ int intc_irq_describe(char* p, int irq)
void __init plat_irq_setup(void)
{
unsigned long long __dummy0, __dummy1=~0x00000000100000f0;
unsigned long long __dummy0, __dummy1=~0x00000000100000f0;
unsigned long reg;
unsigned long data;
int i;
intc_virt = onchip_remap(INTC_BASE, 1024, "INTC");
@ -196,11 +195,8 @@ void __init plat_irq_setup(void)
/* Set default: per-line enable/disable, priority driven ack/eoi */
for (i = 0; i < NR_INTC_IRQS; i++) {
if (platform_int_priority[i] != NO_PRIORITY) {
irq_desc[i].chip = &intc_irq_type;
}
}
for (i = 0; i < NR_INTC_IRQS; i++)
irq_desc[i].chip = &intc_irq_type;
/* Disable all interrupts and set all priorities to 0 to avoid trouble */
@ -211,35 +207,42 @@ void __init plat_irq_setup(void)
ctrl_outl( NO_PRIORITY, reg);
/* Set IRLM */
/* If all the priorities are set to 'no priority', then
* assume we are using encoded mode.
*/
irlm = platform_int_priority[IRQ_IRL0] + platform_int_priority[IRQ_IRL1] + \
platform_int_priority[IRQ_IRL2] + platform_int_priority[IRQ_IRL3];
#ifdef CONFIG_SH_CAYMAN
{
unsigned long data;
if (irlm == NO_PRIORITY) {
/* IRLM = 0 */
reg = INTC_ICR_CLEAR;
i = IRQ_INTA;
printk("Trying to use encoded IRL0-3. IRLs unsupported.\n");
} else {
/* IRLM = 1 */
reg = INTC_ICR_SET;
i = IRQ_IRL0;
}
ctrl_outl(INTC_ICR_IRLM, reg);
/* Set interrupt priorities according to platform description */
for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) {
data |= platform_int_priority[i] << ((i % INTC_INTPRI_PPREG) * 4);
if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) {
/* Upon the 7th, set Priority Register */
ctrl_outl(data, reg);
data = 0;
reg += 8;
/* Set IRLM */
/* If all the priorities are set to 'no priority', then
* assume we are using encoded mode.
*/
irlm = platform_int_priority[IRQ_IRL0] +
platform_int_priority[IRQ_IRL1] +
platform_int_priority[IRQ_IRL2] +
platform_int_priority[IRQ_IRL3];
if (irlm == NO_PRIORITY) {
/* IRLM = 0 */
reg = INTC_ICR_CLEAR;
i = IRQ_INTA;
printk("Trying to use encoded IRL0-3. IRLs unsupported.\n");
} else {
/* IRLM = 1 */
reg = INTC_ICR_SET;
i = IRQ_IRL0;
}
}
ctrl_outl(INTC_ICR_IRLM, reg);
/* Set interrupt priorities according to platform description */
for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) {
data |= platform_int_priority[i] <<
((i % INTC_INTPRI_PPREG) * 4);
if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) {
/* Upon the 7th, set Priority Register */
ctrl_outl(data, reg);
data = 0;
reg += 8;
}
}
#endif
/*
* And now let interrupts come in.

View file

@ -1,7 +1,7 @@
/*
* Shared interrupt handling code for IPR and INTC2 types of IRQs.
*
* Copyright (C) 2007 Magnus Damm
* Copyright (C) 2007, 2008 Magnus Damm
*
* Based on intc2.c and ipr.c
*
@ -62,6 +62,9 @@ struct intc_desc_int {
#endif
static unsigned int intc_prio_level[NR_IRQS]; /* for now */
#ifdef CONFIG_CPU_SH3
static unsigned long ack_handle[NR_IRQS];
#endif
static inline struct intc_desc_int *get_intc_desc(unsigned int irq)
{
@ -98,17 +101,26 @@ static void write_32(unsigned long addr, unsigned long h, unsigned long data)
static void modify_8(unsigned long addr, unsigned long h, unsigned long data)
{
unsigned long flags;
local_irq_save(flags);
ctrl_outb(set_field(ctrl_inb(addr), data, h), addr);
local_irq_restore(flags);
}
static void modify_16(unsigned long addr, unsigned long h, unsigned long data)
{
unsigned long flags;
local_irq_save(flags);
ctrl_outw(set_field(ctrl_inw(addr), data, h), addr);
local_irq_restore(flags);
}
static void modify_32(unsigned long addr, unsigned long h, unsigned long data)
{
unsigned long flags;
local_irq_save(flags);
ctrl_outl(set_field(ctrl_inl(addr), data, h), addr);
local_irq_restore(flags);
}
enum { REG_FN_ERR = 0, REG_FN_WRITE_BASE = 1, REG_FN_MODIFY_BASE = 5 };
@ -219,6 +231,25 @@ static void intc_disable(unsigned int irq)
}
}
#ifdef CONFIG_CPU_SH3
static void intc_mask_ack(unsigned int irq)
{
struct intc_desc_int *d = get_intc_desc(irq);
unsigned long handle = ack_handle[irq];
unsigned long addr;
intc_disable(irq);
/* read register and write zero only to the assocaited bit */
if (handle) {
addr = INTC_REG(d, _INTC_ADDR_D(handle), 0);
ctrl_inb(addr);
ctrl_outb(0x3f ^ set_field(0, 1, handle), addr);
}
}
#endif
static struct intc_handle_int *intc_find_irq(struct intc_handle_int *hp,
unsigned int nr_hp,
unsigned int irq)
@ -280,7 +311,12 @@ static unsigned char intc_irq_sense_table[IRQ_TYPE_SENSE_MASK + 1] = {
[IRQ_TYPE_EDGE_FALLING] = VALID(0),
[IRQ_TYPE_EDGE_RISING] = VALID(1),
[IRQ_TYPE_LEVEL_LOW] = VALID(2),
/* SH7706, SH7707 and SH7709 do not support high level triggered */
#if !defined(CONFIG_CPU_SUBTYPE_SH7706) && \
!defined(CONFIG_CPU_SUBTYPE_SH7707) && \
!defined(CONFIG_CPU_SUBTYPE_SH7709)
[IRQ_TYPE_LEVEL_HIGH] = VALID(3),
#endif
};
static int intc_set_sense(unsigned int irq, unsigned int type)
@ -430,6 +466,40 @@ static unsigned int __init intc_prio_data(struct intc_desc *desc,
return 0;
}
#ifdef CONFIG_CPU_SH3
static unsigned int __init intc_ack_data(struct intc_desc *desc,
struct intc_desc_int *d,
intc_enum enum_id)
{
struct intc_mask_reg *mr = desc->ack_regs;
unsigned int i, j, fn, mode;
unsigned long reg_e, reg_d;
for (i = 0; mr && enum_id && i < desc->nr_ack_regs; i++) {
mr = desc->ack_regs + i;
for (j = 0; j < ARRAY_SIZE(mr->enum_ids); j++) {
if (mr->enum_ids[j] != enum_id)
continue;
fn = REG_FN_MODIFY_BASE;
mode = MODE_ENABLE_REG;
reg_e = mr->set_reg;
reg_d = mr->set_reg;
fn += (mr->reg_width >> 3) - 1;
return _INTC_MK(fn, mode,
intc_get_reg(d, reg_e),
intc_get_reg(d, reg_d),
1,
(mr->reg_width - 1) - j);
}
}
return 0;
}
#endif
static unsigned int __init intc_sense_data(struct intc_desc *desc,
struct intc_desc_int *d,
intc_enum enum_id)
@ -530,6 +600,11 @@ static void __init intc_register_irq(struct intc_desc *desc,
/* irq should be disabled by default */
d->chip.mask(irq);
#ifdef CONFIG_CPU_SH3
if (desc->ack_regs)
ack_handle[irq] = intc_ack_data(desc, d, enum_id);
#endif
}
static unsigned int __init save_reg(struct intc_desc_int *d,
@ -560,6 +635,9 @@ void __init register_intc_controller(struct intc_desc *desc)
d->nr_reg += desc->prio_regs ? desc->nr_prio_regs * 2 : 0;
d->nr_reg += desc->sense_regs ? desc->nr_sense_regs : 0;
#ifdef CONFIG_CPU_SH3
d->nr_reg += desc->ack_regs ? desc->nr_ack_regs : 0;
#endif
d->reg = alloc_bootmem(d->nr_reg * sizeof(*d->reg));
#ifdef CONFIG_SMP
d->smp = alloc_bootmem(d->nr_reg * sizeof(*d->smp));
@ -592,14 +670,23 @@ void __init register_intc_controller(struct intc_desc *desc)
}
}
BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */
d->chip.name = desc->name;
d->chip.mask = intc_disable;
d->chip.unmask = intc_enable;
d->chip.mask_ack = intc_disable;
d->chip.set_type = intc_set_sense;
#ifdef CONFIG_CPU_SH3
if (desc->ack_regs) {
for (i = 0; i < desc->nr_ack_regs; i++)
k += save_reg(d, k, desc->ack_regs[i].set_reg, 0);
d->chip.mask_ack = intc_mask_ack;
}
#endif
BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */
for (i = 0; i < desc->nr_vectors; i++) {
struct intc_vect *vect = desc->vectors + i;

View file

@ -300,7 +300,7 @@ static int denormal_addf(int hx, int hy)
iy = hy & 0x7fffffff;
if (iy < 0x00800000) {
ix = denormal_subf1(ix, iy);
if (ix < 0) {
if ((int) ix < 0) {
ix = -ix;
sign ^= 0x80000000;
}
@ -385,7 +385,7 @@ static long long denormal_addd(long long hx, long long hy)
iy = hy & 0x7fffffffffffffffLL;
if (iy < 0x0010000000000000LL) {
ix = denormal_subd1(ix, iy);
if (ix < 0) {
if ((int) ix < 0) {
ix = -ix;
sign ^= 0x8000000000000000LL;
}

View file

@ -2,7 +2,7 @@
# Makefile for the Linux/SuperH SH-3 backends.
#
obj-y := ex.o probe.o entry.o
obj-y := ex.o probe.o entry.o setup-sh3.o
# CPU subtype setup
obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o

View file

@ -0,0 +1,71 @@
/*
* Shared SH3 Setup code
*
* Copyright (C) 2008 Magnus Damm
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
/* All SH3 devices are equipped with IRQ0->5 (except sh7708) */
enum {
UNUSED = 0,
/* interrupt sources */
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
};
static struct intc_vect vectors_irq0123[] __initdata = {
INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
};
static struct intc_vect vectors_irq45[] __initdata = {
INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
};
static struct intc_prio_reg prio_registers[] __initdata = {
{ 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
{ 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } },
};
static struct intc_mask_reg ack_registers[] __initdata = {
{ 0xa4000004, 0, 8, /* IRR0 */
{ 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } },
};
static struct intc_sense_reg sense_registers[] __initdata = {
{ 0xa4000010, 16, 2, { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } },
};
static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh3-irq0123",
vectors_irq0123, NULL, NULL,
prio_registers, sense_registers, ack_registers);
static DECLARE_INTC_DESC_ACK(intc_desc_irq45, "sh3-irq45",
vectors_irq45, NULL, NULL,
prio_registers, sense_registers, ack_registers);
#define INTC_ICR1 0xa4000010UL
#define INTC_ICR1_IRQLVL (1<<14)
void __init plat_irq_setup_pins(int mode)
{
if (mode == IRQ_MODE_IRQ) {
ctrl_outw(ctrl_inw(INTC_ICR1) & ~INTC_ICR1_IRQLVL, INTC_ICR1);
register_intc_controller(&intc_desc_irq0123);
return;
}
BUG();
}
void __init plat_irq_setup_sh3(void)
{
register_intc_controller(&intc_desc_irq45);
}

View file

@ -37,7 +37,7 @@ enum {
};
static struct intc_vect vectors[] __initdata = {
INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
/* IRQ0->5 are handled in setup-sh3.c */
INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720),
INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820),
INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860),
@ -48,7 +48,7 @@ static struct intc_vect vectors[] __initdata = {
INTC_VECT(ADC_ADI, 0x980),
INTC_VECT(USB_USI0, 0xa20), INTC_VECT(USB_USI1, 0xa40),
INTC_VECT(TPU0, 0xc00), INTC_VECT(TPU1, 0xc20),
INTC_VECT(TPU3, 0xc80), INTC_VECT(TPU1, 0xca0),
INTC_VECT(TPU2, 0xc80), INTC_VECT(TPU3, 0xca0),
INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460),
INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0),
@ -81,14 +81,6 @@ static struct intc_prio_reg prio_registers[] __initdata = {
static DECLARE_INTC_DESC(intc_desc, "sh7705", vectors, groups,
NULL, prio_registers, NULL);
static struct intc_vect vectors_irq[] __initdata = {
INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
};
static DECLARE_INTC_DESC(intc_desc_irq, "sh7705-irq", vectors_irq, NULL,
NULL, prio_registers, NULL);
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xa4410000,
@ -159,16 +151,8 @@ static int __init sh7705_devices_setup(void)
}
__initcall(sh7705_devices_setup);
void __init plat_irq_setup_pins(int mode)
{
if (mode == IRQ_MODE_IRQ) {
register_intc_controller(&intc_desc_irq);
return;
}
BUG();
}
void __init plat_irq_setup(void)
{
register_intc_controller(&intc_desc);
plat_irq_setup_sh3();
}

View file

@ -52,7 +52,7 @@ static struct intc_vect vectors[] __initdata = {
#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
defined(CONFIG_CPU_SUBTYPE_SH7707) || \
defined(CONFIG_CPU_SUBTYPE_SH7709)
INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
/* IRQ0->5 are handled in setup-sh3.c */
INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820),
INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860),
INTC_VECT(ADC_ADI, 0x980),
@ -104,18 +104,6 @@ static struct intc_prio_reg prio_registers[] __initdata = {
static DECLARE_INTC_DESC(intc_desc, "sh770x", vectors, groups,
NULL, prio_registers, NULL);
#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
defined(CONFIG_CPU_SUBTYPE_SH7707) || \
defined(CONFIG_CPU_SUBTYPE_SH7709)
static struct intc_vect vectors_irq[] __initdata = {
INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
};
static DECLARE_INTC_DESC(intc_desc_irq, "sh770x-irq", vectors_irq, NULL,
NULL, prio_registers, NULL);
#endif
static struct resource rtc_resources[] = {
[0] = {
.start = 0xfffffec0,
@ -194,24 +182,12 @@ static int __init sh770x_devices_setup(void)
}
__initcall(sh770x_devices_setup);
#define INTC_ICR1 0xa4000010UL
#define INTC_ICR1_IRQLVL (1<<14)
void __init plat_irq_setup_pins(int mode)
{
if (mode == IRQ_MODE_IRQ) {
#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
defined(CONFIG_CPU_SUBTYPE_SH7707) || \
defined(CONFIG_CPU_SUBTYPE_SH7709)
ctrl_outw(ctrl_inw(INTC_ICR1) & ~INTC_ICR1_IRQLVL, INTC_ICR1);
register_intc_controller(&intc_desc_irq);
return;
#endif
}
BUG();
}
void __init plat_irq_setup(void)
{
register_intc_controller(&intc_desc);
#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
defined(CONFIG_CPU_SUBTYPE_SH7707) || \
defined(CONFIG_CPU_SUBTYPE_SH7709)
plat_irq_setup_sh3();
#endif
}

View file

@ -38,7 +38,7 @@ enum {
};
static struct intc_vect vectors[] __initdata = {
INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
/* IRQ0->5 are handled in setup-sh3.c */
INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820),
INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860),
INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0),
@ -79,10 +79,7 @@ static struct intc_prio_reg prio_registers[] __initdata = {
{ 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
{ 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } },
{ 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC1, SCIF0, SCIF1 } },
{ 0xa4080000, 0, 16, 4, /* IPRF */ { 0, DMAC2 } },
#ifdef CONFIG_CPU_SUBTYPE_SH7710
{ 0xa4080000, 0, 16, 4, /* IPRF */ { IPSEC } },
#endif
{ 0xa4080000, 0, 16, 4, /* IPRF */ { IPSEC, DMAC2 } },
{ 0xa4080002, 0, 16, 4, /* IPRG */ { EDMAC0, EDMAC1, EDMAC2 } },
{ 0xa4080004, 0, 16, 4, /* IPRH */ { 0, 0, 0, SIOF0 } },
{ 0xa4080006, 0, 16, 4, /* IPRI */ { 0, 0, SIOF1 } },
@ -91,14 +88,6 @@ static struct intc_prio_reg prio_registers[] __initdata = {
static DECLARE_INTC_DESC(intc_desc, "sh7710", vectors, groups,
NULL, prio_registers, NULL);
static struct intc_vect vectors_irq[] __initdata = {
INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
};
static DECLARE_INTC_DESC(intc_desc_irq, "sh7710-irq", vectors_irq, NULL,
NULL, prio_registers, NULL);
static struct resource rtc_resources[] = {
[0] = {
.start = 0xa413fec0,
@ -170,16 +159,8 @@ static int __init sh7710_devices_setup(void)
}
__initcall(sh7710_devices_setup);
void __init plat_irq_setup_pins(int mode)
{
if (mode == IRQ_MODE_IRQ) {
register_intc_controller(&intc_desc_irq);
return;
}
BUG();
}
void __init plat_irq_setup(void)
{
register_intc_controller(&intc_desc);
plat_irq_setup_sh3();
}

View file

@ -19,10 +19,6 @@
#include <linux/serial_sci.h>
#include <asm/rtc.h>
#define INTC_ICR1 0xA4140010UL
#define INTC_ICR_IRLM 0x4000
#define INTC_ICR_IRQ (~INTC_ICR_IRLM)
static struct resource rtc_resources[] = {
[0] = {
.start = 0xa413fec0,
@ -170,6 +166,7 @@ enum {
};
static struct intc_vect vectors[] __initdata = {
/* IRQ0->5 are handled in setup-sh3.c */
INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
INTC_VECT(TMU2, 0x440), INTC_VECT(RTC_ATI, 0x480),
INTC_VECT(RTC_PRI, 0x4a0), INTC_VECT(RTC_CUI, 0x4c0),
@ -214,11 +211,7 @@ static struct intc_prio_reg prio_registers[] __initdata = {
{ 0xA414FEE4UL, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, SIM, 0 } },
{ 0xA4140016UL, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
{ 0xA4140018UL, 0, 16, 4, /* IPRD */ { USBF_SPD, TMU_SUNI, IRQ5, IRQ4 } },
#if defined(CONFIG_CPU_SUBTYPE_SH7720)
{ 0xA414001AUL, 0, 16, 4, /* IPRE */ { DMAC1, 0, LCDC, SSL } },
#else
{ 0xA414001AUL, 0, 16, 4, /* IPRE */ { DMAC1, 0, LCDC, 0 } },
#endif
{ 0xA4080000UL, 0, 16, 4, /* IPRF */ { ADC, DMAC2, USBFI, CMT } },
{ 0xA4080002UL, 0, 16, 4, /* IPRG */ { SCIF0, SCIF1, 0, 0 } },
{ 0xA4080004UL, 0, 16, 4, /* IPRH */ { PINT07, PINT815, TPU, IIC } },
@ -229,32 +222,8 @@ static struct intc_prio_reg prio_registers[] __initdata = {
static DECLARE_INTC_DESC(intc_desc, "sh7720", vectors, groups,
NULL, prio_registers, NULL);
static struct intc_sense_reg sense_registers[] __initdata = {
{ INTC_ICR1, 16, 2, { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } },
};
static struct intc_vect vectors_irq[] __initdata = {
INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
};
static DECLARE_INTC_DESC(intc_irq_desc, "sh7720-irq", vectors_irq,
NULL, NULL, prio_registers, sense_registers);
void __init plat_irq_setup_pins(int mode)
{
switch (mode) {
case IRQ_MODE_IRQ:
ctrl_outw(ctrl_inw(INTC_ICR1) & INTC_ICR_IRQ, INTC_ICR1);
register_intc_controller(&intc_irq_desc);
break;
default:
BUG();
}
}
void __init plat_irq_setup(void)
{
register_intc_controller(&intc_desc);
plat_irq_setup_sh3();
}

View file

@ -143,12 +143,22 @@ resvec_save_area:
trap_jtable:
.long do_exception_error /* 0x000 */
.long do_exception_error /* 0x020 */
#ifdef CONFIG_MMU
.long tlb_miss_load /* 0x040 */
.long tlb_miss_store /* 0x060 */
#else
.long do_exception_error
.long do_exception_error
#endif
! ARTIFICIAL pseudo-EXPEVT setting
.long do_debug_interrupt /* 0x080 */
#ifdef CONFIG_MMU
.long tlb_miss_load /* 0x0A0 */
.long tlb_miss_store /* 0x0C0 */
#else
.long do_exception_error
.long do_exception_error
#endif
.long do_address_error_load /* 0x0E0 */
.long do_address_error_store /* 0x100 */
#ifdef CONFIG_SH_FPU
@ -185,10 +195,18 @@ trap_jtable:
.endr
.long do_IRQ /* 0xA00 */
.long do_IRQ /* 0xA20 */
#ifdef CONFIG_MMU
.long itlb_miss_or_IRQ /* 0xA40 */
#else
.long do_IRQ
#endif
.long do_IRQ /* 0xA60 */
.long do_IRQ /* 0xA80 */
#ifdef CONFIG_MMU
.long itlb_miss_or_IRQ /* 0xAA0 */
#else
.long do_IRQ
#endif
.long do_exception_error /* 0xAC0 */
.long do_address_error_exec /* 0xAE0 */
.rept 8
@ -274,6 +292,7 @@ not_a_tlb_miss:
* Instead of '.space 1024-TEXT_SIZE' place the RESVEC
* block making sure the final alignment is correct.
*/
#ifdef CONFIG_MMU
tlb_miss:
synco /* TAKum03020 (but probably a good idea anyway.) */
putcon SP, KCR1
@ -377,6 +396,9 @@ fixup_to_invoke_general_handler:
getcon KCR1, SP
pta handle_exception, tr0
blink tr0, ZERO
#else /* CONFIG_MMU */
.balign 256
#endif
/* NB TAKE GREAT CARE HERE TO ENSURE THAT THE INTERRUPT CODE
DOES END UP AT VBR+0x600 */
@ -1103,6 +1125,7 @@ restore_all:
* fpu_error_or_IRQ? is a helper to deflect to the right cause.
*
*/
#ifdef CONFIG_MMU
tlb_miss_load:
or SP, ZERO, r2
or ZERO, ZERO, r3 /* Read */
@ -1132,6 +1155,7 @@ call_do_page_fault:
movi do_page_fault, r6
ptabs r6, tr0
blink tr0, ZERO
#endif /* CONFIG_MMU */
fpu_error_or_IRQA:
pta its_IRQ, tr0
@ -1481,6 +1505,7 @@ poke_real_address_q:
ptabs LINK, tr0
blink tr0, r63
#ifdef CONFIG_MMU
/*
* --- User Access Handling Section
*/
@ -1604,6 +1629,7 @@ ___clear_user_exit:
ptabs LINK, tr0
blink tr0, ZERO
#endif /* CONFIG_MMU */
/*
* int __strncpy_from_user(unsigned long __dest, unsigned long __src,
@ -2014,9 +2040,11 @@ sa_default_restorer:
.global asm_uaccess_start /* Just a marker */
asm_uaccess_start:
#ifdef CONFIG_MMU
.long ___copy_user1, ___copy_user_exit
.long ___copy_user2, ___copy_user_exit
.long ___clear_user1, ___clear_user_exit
#endif
.long ___strncpy_from_user1, ___strncpy_from_user_exit
.long ___strnlen_user1, ___strnlen_user_exit
.long ___get_user_asm_b1, ___get_user_asm_b_exit

View file

@ -15,6 +15,7 @@
#include <linux/string.h>
#include <asm/processor.h>
#include <asm/cache.h>
#include <asm/tlb.h>
int __init detect_cpu_and_cache_system(void)
{
@ -67,5 +68,8 @@ int __init detect_cpu_and_cache_system(void)
set_bit(SH_CACHE_MODE_WB, &(boot_cpu_data.dcache.flags));
#endif
/* Setup some I/D TLB defaults */
sh64_tlb_init();
return 0;
}

View file

@ -141,7 +141,9 @@ static void scif_sercon_init(char *s)
*/
static void scif_sercon_init(char *s)
{
struct uart_port *port = &scif_port;
unsigned baud = DEFAULT_BAUD;
unsigned int status;
char *e;
if (*s == ',')
@ -160,19 +162,25 @@ static void scif_sercon_init(char *s)
baud = DEFAULT_BAUD;
}
ctrl_outw(0, scif_port.mapbase + 8);
ctrl_outw(0, scif_port.mapbase);
do {
status = sci_in(port, SCxSR);
} while (!(status & SCxSR_TEND(port)));
sci_out(port, SCSCR, 0); /* TE=0, RE=0 */
sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
sci_out(port, SCSMR, 0);
/* Set baud rate */
ctrl_outb((CONFIG_SH_PCLK_FREQ + 16 * baud) /
(32 * baud) - 1, scif_port.mapbase + 4);
sci_out(port, SCBRR, (CONFIG_SH_PCLK_FREQ + 16 * baud) /
(32 * baud) - 1);
udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
ctrl_outw(12, scif_port.mapbase + 24);
ctrl_outw(8, scif_port.mapbase + 24);
ctrl_outw(0, scif_port.mapbase + 32);
ctrl_outw(0x60, scif_port.mapbase + 16);
ctrl_outw(0, scif_port.mapbase + 36);
ctrl_outw(0x30, scif_port.mapbase + 8);
sci_out(port, SCSPTR, 0);
sci_out(port, SCxSR, 0x60);
sci_out(port, SCLSR, 0);
sci_out(port, SCFCR, 0);
sci_out(port, SCSCR, 0x30); /* TE=1, RE=1 */
}
#endif /* defined(CONFIG_CPU_SUBTYPE_SH7720) */
#endif /* !defined(CONFIG_SH_STANDARD_BIOS) */

View file

@ -53,6 +53,7 @@ EXPORT_SYMBOL(cpu_data);
* sh_mv= on the command line, prior to .machvec.init teardown.
*/
struct sh_machine_vector sh_mv = { .mv_name = "generic", };
EXPORT_SYMBOL(sh_mv);
#ifdef CONFIG_VT
struct screen_info screen_info;
@ -76,11 +77,18 @@ static struct resource data_resource = {
.flags = IORESOURCE_BUSY | IORESOURCE_MEM,
};
static struct resource bss_resource = {
.name = "Kernel bss",
.flags = IORESOURCE_BUSY | IORESOURCE_MEM,
};
unsigned long memory_start;
EXPORT_SYMBOL(memory_start);
unsigned long memory_end = 0;
EXPORT_SYMBOL(memory_end);
static struct resource mem_resources[MAX_NUMNODES];
int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;
static int __init early_parse_mem(char *p)
@ -169,6 +177,40 @@ static inline void __init reserve_crashkernel(void)
{}
#endif
void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
unsigned long end_pfn)
{
struct resource *res = &mem_resources[nid];
WARN_ON(res->name); /* max one active range per node for now */
res->name = "System RAM";
res->start = start_pfn << PAGE_SHIFT;
res->end = (end_pfn << PAGE_SHIFT) - 1;
res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
if (request_resource(&iomem_resource, res)) {
pr_err("unable to request memory_resource 0x%lx 0x%lx\n",
start_pfn, end_pfn);
return;
}
/*
* We don't know which RAM region contains kernel data,
* so we try it repeatedly and let the resource manager
* test it.
*/
request_resource(res, &code_resource);
request_resource(res, &data_resource);
request_resource(res, &bss_resource);
#ifdef CONFIG_KEXEC
if (crashk_res.start != crashk_res.end)
request_resource(res, &crashk_res);
#endif
add_active_range(nid, start_pfn, end_pfn);
}
void __init setup_bootmem_allocator(unsigned long free_pfn)
{
unsigned long bootmap_size;
@ -181,7 +223,7 @@ void __init setup_bootmem_allocator(unsigned long free_pfn)
bootmap_size = init_bootmem_node(NODE_DATA(0), free_pfn,
min_low_pfn, max_low_pfn);
add_active_range(0, min_low_pfn, max_low_pfn);
__add_active_range(0, min_low_pfn, max_low_pfn);
register_bootmem_low_pages();
node_set_online(0);
@ -267,6 +309,8 @@ void __init setup_arch(char **cmdline_p)
code_resource.end = virt_to_phys(_etext)-1;
data_resource.start = virt_to_phys(_etext);
data_resource.end = virt_to_phys(_edata)-1;
bss_resource.start = virt_to_phys(__bss_start);
bss_resource.end = virt_to_phys(_ebss)-1;
memory_start = (unsigned long)__va(__MEMORY_START);
if (!memory_end)

View file

@ -20,8 +20,6 @@
extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
extern struct hw_interrupt_type no_irq_type;
EXPORT_SYMBOL(sh_mv);
/* platform dependent support */
EXPORT_SYMBOL(dump_fpu);
EXPORT_SYMBOL(kernel_thread);

View file

@ -16,6 +16,7 @@
#include <linux/in6.h>
#include <linux/interrupt.h>
#include <linux/screen_info.h>
#include <asm/cacheflush.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
#include <asm/checksum.h>
@ -29,25 +30,50 @@ extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
EXPORT_SYMBOL(dump_fpu);
EXPORT_SYMBOL(kernel_thread);
#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU)
EXPORT_SYMBOL(clear_user_page);
#endif
#ifndef CONFIG_CACHE_OFF
EXPORT_SYMBOL(flush_dcache_page);
#endif
/* Networking helper routines. */
EXPORT_SYMBOL(csum_partial);
EXPORT_SYMBOL(csum_partial_copy_nocheck);
#ifdef CONFIG_IPV6
EXPORT_SYMBOL(csum_ipv6_magic);
#endif
#ifdef CONFIG_VT
EXPORT_SYMBOL(screen_info);
#endif
EXPORT_SYMBOL(__put_user_asm_b);
EXPORT_SYMBOL(__put_user_asm_w);
EXPORT_SYMBOL(__put_user_asm_l);
EXPORT_SYMBOL(__put_user_asm_q);
EXPORT_SYMBOL(__get_user_asm_b);
EXPORT_SYMBOL(__get_user_asm_w);
EXPORT_SYMBOL(__get_user_asm_l);
EXPORT_SYMBOL(__get_user_asm_q);
EXPORT_SYMBOL(__strnlen_user);
EXPORT_SYMBOL(__strncpy_from_user);
EXPORT_SYMBOL(clear_page);
EXPORT_SYMBOL(__clear_user);
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(__copy_user);
EXPORT_SYMBOL(empty_zero_page);
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(__udelay);
EXPORT_SYMBOL(__ndelay);
EXPORT_SYMBOL(__const_udelay);
/* Ugh. These come in from libgcc.a at link time. */
#define DECLARE_EXPORT(name) extern void name(void);EXPORT_SYMBOL(name)
DECLARE_EXPORT(__sdivsi3);
DECLARE_EXPORT(__sdivsi3_2);
DECLARE_EXPORT(__muldi3);
DECLARE_EXPORT(__udivsi3);
DECLARE_EXPORT(__div_table);

View file

@ -172,6 +172,7 @@ void do_gettimeofday(struct timeval *tv)
tv->tv_sec = sec;
tv->tv_usec = usec;
}
EXPORT_SYMBOL(do_gettimeofday);
int do_settimeofday(struct timespec *tv)
{
@ -240,7 +241,7 @@ static inline void do_timer_interrupt(void)
* the irq version of write_lock because as just said we have irq
* locally disabled. -arca
*/
write_lock(&xtime_lock);
write_seqlock(&xtime_lock);
asm ("getcon cr62, %0" : "=r" (current_ctc));
ctc_last_interrupt = (unsigned long) current_ctc;
@ -266,7 +267,7 @@ static inline void do_timer_interrupt(void)
/* do it again in 60 s */
last_rtc_update = xtime.tv_sec - 600;
}
write_unlock(&xtime_lock);
write_sequnlock(&xtime_lock);
#ifndef CONFIG_SMP
update_process_times(user_mode(get_irq_regs()));

View file

@ -186,8 +186,8 @@ void evt_debug(int evt, int ret_addr, int event, int tra, struct pt_regs *regs)
rr->pc = regs->pc;
if (sp < stack_bottom + 3092) {
printk("evt_debug : stack underflow report\n");
int i, j;
printk("evt_debug : stack underflow report\n");
for (j=0, i = event_ptr; j<16; j++) {
rr = event_ring + i;
printk("evt=%08x event=%08x tra=%08x pid=%5d sp=%08lx pc=%08lx\n",

View file

@ -2,10 +2,11 @@
# Makefile for the Linux SuperH-specific parts of the memory manager.
#
obj-y := init.o extable_64.o consistent.o
obj-y := init.o consistent.o
mmu-y := tlb-nommu.o pg-nommu.o
mmu-$(CONFIG_MMU) := fault_64.o ioremap_64.o tlbflush_64.o tlb-sh5.o
mmu-y := tlb-nommu.o pg-nommu.o extable_32.o
mmu-$(CONFIG_MMU) := fault_64.o ioremap_64.o tlbflush_64.o tlb-sh5.o \
extable_64.o
ifndef CONFIG_CACHE_OFF
obj-y += cache-sh5.o

View file

@ -714,6 +714,7 @@ void flush_cache_sigtramp(unsigned long vaddr)
sh64_icache_inv_current_user_range(vaddr, end);
}
#ifdef CONFIG_MMU
/*
* These *MUST* lie in an area of virtual address space that's otherwise
* unused.
@ -830,3 +831,4 @@ void clear_user_page(void *to, unsigned long address, struct page *page)
else
sh64_clear_user_page_coloured(to, address);
}
#endif

View file

@ -343,6 +343,7 @@ unsigned long onchip_remap(unsigned long phys, unsigned long size, const char *n
return shmedia_alloc_io(phys, size, name);
}
EXPORT_SYMBOL(onchip_remap);
void onchip_unmap(unsigned long vaddr)
{
@ -370,6 +371,7 @@ void onchip_unmap(unsigned long vaddr)
kfree(res);
}
}
EXPORT_SYMBOL(onchip_unmap);
#ifdef CONFIG_PROC_FS
static int

View file

@ -59,7 +59,7 @@ void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
free_pfn = start_pfn = start >> PAGE_SHIFT;
end_pfn = end >> PAGE_SHIFT;
add_active_range(nid, start_pfn, end_pfn);
__add_active_range(nid, start_pfn, end_pfn);
/* Node-local pgdat */
NODE_DATA(nid) = pfn_to_kaddr(free_pfn);

View file

@ -28,7 +28,6 @@ HD64465 HD64465
7751SYSTEMH SH_7751_SYSTEMH
HP6XX SH_HP6XX
DREAMCAST SH_DREAMCAST
MPC1211 SH_MPC1211
SNAPGEAR SH_SECUREEDGE5410
EDOSK7705 SH_EDOSK7705
SH4202_MICRODEV SH_SH4202_MICRODEV

View file

@ -25,7 +25,7 @@
#elif defined(__arm__)
/* defined in include/asm-arm/arch-xxx/irqs.h */
#include <asm/irq.h>
#elif defined(CONFIG_SUPERH64)
#elif defined(CONFIG_SH_CAYMAN)
#include <asm/irq.h>
#else
# define I8042_KBD_IRQ 1

View file

@ -374,7 +374,7 @@ config MTD_REDWOOD
config MTD_SOLUTIONENGINE
tristate "CFI Flash device mapped on Hitachi SolutionEngine"
depends on SUPERH && MTD_CFI && MTD_REDBOOT_PARTS
depends on SUPERH && SOLUTION_ENGINE && MTD_CFI && MTD_REDBOOT_PARTS
help
This enables access to the flash chips on the Hitachi SolutionEngine and
similar boards. Say 'Y' if you are building a kernel for such a board.
@ -480,13 +480,6 @@ config MTD_H720X
This enables access to the flash chips on the Hynix evaluation boards.
If you have such a board, say 'Y'.
config MTD_MPC1211
tristate "CFI Flash device mapped on Interface MPC-1211"
depends on SH_MPC1211 && MTD_CFI
help
This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02).
If you have such a board, say 'Y'.
config MTD_OMAP_NOR
tristate "TI OMAP board mappings"
depends on MTD_CFI && ARCH_OMAP

View file

@ -58,7 +58,6 @@ obj-$(CONFIG_MTD_WALNUT) += walnut.o
obj-$(CONFIG_MTD_H720X) += h720x-flash.o
obj-$(CONFIG_MTD_SBC8240) += sbc8240.o
obj-$(CONFIG_MTD_NOR_TOTO) += omap-toto-flash.o
obj-$(CONFIG_MTD_MPC1211) += mpc1211.o
obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o
obj-$(CONFIG_MTD_IXP2000) += ixp2000.o
obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o

View file

@ -1,80 +0,0 @@
/*
* Flash on MPC-1211
*
* $Id: mpc1211.c,v 1.4 2004/09/16 23:27:13 gleixner Exp $
*
* (C) 2002 Interface, Saito.K & Jeanne
*
* GPL'd
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <asm/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
static struct mtd_info *flash_mtd;
static struct mtd_partition *parsed_parts;
struct map_info mpc1211_flash_map = {
.name = "MPC-1211 FLASH",
.size = 0x80000,
.bankwidth = 1,
};
static struct mtd_partition mpc1211_partitions[] = {
{
.name = "IPL & ETH-BOOT",
.offset = 0x00000000,
.size = 0x10000,
},
{
.name = "Flash FS",
.offset = 0x00010000,
.size = MTDPART_SIZ_FULL,
}
};
static int __init init_mpc1211_maps(void)
{
int nr_parts;
mpc1211_flash_map.phys = 0;
mpc1211_flash_map.virt = (void __iomem *)P2SEGADDR(0);
simple_map_init(&mpc1211_flash_map);
printk(KERN_NOTICE "Probing for flash chips at 0x00000000:\n");
flash_mtd = do_map_probe("jedec_probe", &mpc1211_flash_map);
if (!flash_mtd) {
printk(KERN_NOTICE "Flash chips not detected at either possible location.\n");
return -ENXIO;
}
printk(KERN_NOTICE "MPC-1211: Flash at 0x%08lx\n", mpc1211_flash_map.virt & 0x1fffffff);
flash_mtd->module = THIS_MODULE;
parsed_parts = mpc1211_partitions;
nr_parts = ARRAY_SIZE(mpc1211_partitions);
add_mtd_partitions(flash_mtd, parsed_parts, nr_parts);
return 0;
}
static void __exit cleanup_mpc1211_maps(void)
{
if (parsed_parts)
del_mtd_partitions(flash_mtd);
else
del_mtd_device(flash_mtd);
map_destroy(flash_mtd);
}
module_init(init_mpc1211_maps);
module_exit(cleanup_mpc1211_maps);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Saito.K & Jeanne <ksaito@interface.co.jp>");
MODULE_DESCRIPTION("MTD map driver for MPC-1211 boards. Interface");

View file

@ -616,7 +616,7 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev)
goto err_badres;
}
rtc->regbase = (void __iomem *)rtc->res->start;
rtc->regbase = ioremap_nocache(rtc->res->start, rtc->regsize);
if (unlikely(!rtc->regbase)) {
ret = -EINVAL;
goto err_badmap;
@ -626,7 +626,7 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev)
&sh_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc->rtc_dev)) {
ret = PTR_ERR(rtc->rtc_dev);
goto err_badmap;
goto err_unmap;
}
rtc->capabilities = RTC_DEF_CAPABILITIES;
@ -653,7 +653,7 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev)
dev_err(&pdev->dev,
"request period IRQ failed with %d, IRQ %d\n", ret,
rtc->periodic_irq);
goto err_badmap;
goto err_unmap;
}
ret = request_irq(rtc->carry_irq, sh_rtc_interrupt, IRQF_DISABLED,
@ -663,7 +663,7 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev)
"request carry IRQ failed with %d, IRQ %d\n", ret,
rtc->carry_irq);
free_irq(rtc->periodic_irq, rtc);
goto err_badmap;
goto err_unmap;
}
ret = request_irq(rtc->alarm_irq, sh_rtc_alarm, IRQF_DISABLED,
@ -674,7 +674,7 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev)
rtc->alarm_irq);
free_irq(rtc->carry_irq, rtc);
free_irq(rtc->periodic_irq, rtc);
goto err_badmap;
goto err_unmap;
}
tmp = readb(rtc->regbase + RCR1);
@ -684,6 +684,8 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev)
return 0;
err_unmap:
iounmap(rtc->regbase);
err_badmap:
release_resource(rtc->res);
err_badres:
@ -708,6 +710,8 @@ static int __devexit sh_rtc_remove(struct platform_device *pdev)
release_resource(rtc->res);
iounmap(rtc->regbase);
platform_set_drvdata(pdev, NULL);
kfree(rtc);

View file

@ -42,14 +42,12 @@
#include <linux/console.h>
#include <linux/platform_device.h>
#include <linux/serial_sci.h>
#ifdef CONFIG_CPU_FREQ
#include <linux/notifier.h>
#include <linux/cpufreq.h>
#endif
#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
#include <linux/clk.h>
#include <linux/ctype.h>
#ifdef CONFIG_SUPERH
#include <asm/clock.h>
#include <asm/sh_bios.h>
#include <asm/kgdb.h>
@ -80,7 +78,7 @@ struct sci_port {
struct timer_list break_timer;
int break_flag;
#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
#ifdef CONFIG_SUPERH
/* Port clock */
struct clk *clk;
#endif
@ -365,21 +363,19 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
{
unsigned int fcr_val = 0;
unsigned short data;
if (cflag & CRTSCTS) {
fcr_val |= SCFCR_MCE;
if (port->mapbase == 0xffe00000) {
data = ctrl_inw(PSCR);
data &= ~0x03cf;
if (cflag & CRTSCTS)
fcr_val |= SCFCR_MCE;
else
data |= 0x0340;
ctrl_outw(0x0000, PORT_PSCR);
} else {
unsigned short data;
data = ctrl_inw(PORT_PSCR);
data &= 0x033f;
data |= 0x0400;
ctrl_outw(data, PORT_PSCR);
ctrl_outw(ctrl_inw(SCSPTR0) & 0x17, SCSPTR0);
ctrl_outw(data, PSCR);
}
/* SCIF1 and SCIF2 should be setup by board code */
sci_out(port, SCFCR, fcr_val);
}

View file

@ -76,12 +76,13 @@
# define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */
# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
# define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */
# define SCSPTR0 SCPDR0
# define PADR 0xA4050120
# define PSDR 0xA405013e
# define PWDR 0xA4050166
# define PSCR 0xA405011E
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
# define PORT_PSCR 0xA405011E
#elif defined(CONFIG_CPU_SUBTYPE_SH7366)
# define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */
# define SCSPTR0 SCPDR0
@ -320,7 +321,7 @@
unsigned int addr = port->mapbase + (offset); \
if ((size) == 8) { \
ctrl_outb(value, addr); \
} else { \
} else if ((size) == 16) { \
ctrl_outw(value, addr); \
}
@ -451,7 +452,11 @@ SCIF_FNS(SCSPTR, 0, 0, 0x24, 16)
SCIF_FNS(SCLSR, 0, 0, 0x28, 16)
#else
SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16)
#if defined(CONFIG_CPU_SUBTYPE_SH7722)
SCIF_FNS(SCSPTR, 0, 0, 0, 0)
#else
SCIF_FNS(SCSPTR, 0, 0, 0x20, 16)
#endif
SCIF_FNS(SCLSR, 0, 0, 0x24, 16)
#endif
#endif
@ -593,13 +598,25 @@ static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7722) || defined(CONFIG_CPU_SUBTYPE_SH7366)
#elif defined(CONFIG_CPU_SUBTYPE_SH7366)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xffe00000)
return ctrl_inb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xffe00000)
return ctrl_inb(PSDR) & 0x02 ? 1 : 0; /* SCIF0 */
if (port->mapbase == 0xffe10000)
return ctrl_inb(PADR) & 0x40 ? 1 : 0; /* SCIF1 */
if (port->mapbase == 0xffe20000)
return ctrl_inb(PWDR) & 0x04 ? 1 : 0; /* SCIF2 */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
static inline int sci_rxd_in(struct uart_port *port)
{

View file

@ -3,19 +3,19 @@
#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
defined(CONFIG_CPU_SUBTYPE_SH7709)
defined(CONFIG_CPU_SUBTYPE_SH7721)
#define SH_DMAC_BASE 0xa4010020
#else
#define SH_DMAC_BASE 0xa4000020
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7709)
#define DMTE0_IRQ 48
#define DMTE1_IRQ 49
#define DMTE2_IRQ 50
#define DMTE3_IRQ 51
#define DMTE4_IRQ 76
#define DMTE5_IRQ 77
#else
#define SH_DMAC_BASE 0xa4000020
#endif
/* Definitions for the SuperH DMAC */

View file

@ -79,6 +79,10 @@ struct intc_desc {
struct intc_sense_reg *sense_regs;
unsigned int nr_sense_regs;
char *name;
#ifdef CONFIG_CPU_SH3
struct intc_mask_reg *ack_regs;
unsigned int nr_ack_regs;
#endif
};
#define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a)
@ -91,10 +95,25 @@ struct intc_desc symbol __initdata = { \
chipname, \
}
#ifdef CONFIG_CPU_SH3
#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups, \
mask_regs, prio_regs, sense_regs, ack_regs) \
struct intc_desc symbol __initdata = { \
_INTC_ARRAY(vectors), _INTC_ARRAY(groups), \
_INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs), \
_INTC_ARRAY(sense_regs), \
chipname, \
_INTC_ARRAY(ack_regs), \
}
#endif
void __init register_intc_controller(struct intc_desc *desc);
int intc_set_priority(unsigned int irq, unsigned int prio);
void __init plat_irq_setup(void);
#ifdef CONFIG_CPU_SH3
void __init plat_irq_setup_sh3(void);
#endif
enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210,
IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK,

View file

@ -268,11 +268,6 @@ unsigned long long peek_real_address_q(unsigned long long addr);
unsigned long long poke_real_address_q(unsigned long long addr,
unsigned long long val);
/* arch/sh/mm/ioremap_64.c */
unsigned long onchip_remap(unsigned long addr, unsigned long size,
const char *name);
extern void onchip_unmap(unsigned long vaddr);
#if !defined(CONFIG_MMU)
#define virt_to_phys(address) ((unsigned long)(address))
#define phys_to_virt(address) ((void *)(address))
@ -302,9 +297,16 @@ extern void onchip_unmap(unsigned long vaddr);
void __iomem *__ioremap(unsigned long offset, unsigned long size,
unsigned long flags);
void __iounmap(void __iomem *addr);
/* arch/sh/mm/ioremap_64.c */
unsigned long onchip_remap(unsigned long addr, unsigned long size,
const char *name);
extern void onchip_unmap(unsigned long vaddr);
#else
#define __ioremap(offset, size, flags) ((void __iomem *)(offset))
#define __iounmap(addr) do { } while (0)
#define onchip_remap(addr, size, name) (addr)
#define onchip_unmap(addr) do { } while (0)
#endif /* CONFIG_MMU */
static inline void __iomem *

View file

@ -1,13 +0,0 @@
#ifndef __ASM_SH_KEYBOARD_H
#define __ASM_SH_KEYBOARD_H
/*
* $Id: keyboard.h,v 1.1.1.1 2001/10/15 20:45:09 mrbrown Exp $
*/
#include <linux/kd.h>
#include <asm/machvec.h>
#ifdef CONFIG_SH_MPC1211
#include <asm/mpc1211/keyboard-mpc1211.h>
#endif
#endif

View file

@ -27,6 +27,7 @@
/* ASID is 8-bit value, so it can't be 0x100 */
#define MMU_NO_ASID 0x100
#ifdef CONFIG_MMU
#define asid_cache(cpu) (cpu_data[cpu].asid_cache)
#define cpu_context(cpu, mm) ((mm)->context.id[cpu])
@ -38,7 +39,6 @@
*/
#define MMU_VPN_MASK 0xfffff000
#ifdef CONFIG_MMU
#if defined(CONFIG_SUPERH32)
#include "mmu_context_32.h"
#else
@ -129,6 +129,8 @@ static inline void switch_mm(struct mm_struct *prev,
#define destroy_context(mm) do { } while (0)
#define set_asid(asid) do { } while (0)
#define get_asid() (0)
#define cpu_asid(cpu, mm) ({ (void)cpu; 0; })
#define switch_and_save_asid(asid) (0)
#define set_TTB(pgd) do { } while (0)
#define get_TTB() (0)
#define activate_context(mm,cpu) do { } while (0)

View file

@ -41,6 +41,8 @@ void __init plat_mem_setup(void);
/* arch/sh/kernel/setup.c */
void __init setup_bootmem_allocator(unsigned long start_pfn);
void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
unsigned long end_pfn);
#endif /* __KERNEL__ */
#endif /* __ASM_SH_MMZONE_H */

View file

@ -1,303 +0,0 @@
/* $Id: dma.h,v 1.7 1992/12/14 00:29:34 root Exp root $
* linux/include/asm/dma.h: Defines for using and allocating dma channels.
* Written by Hennus Bergman, 1992.
* High DMA channel support & info by Hannu Savolainen
* and John Boyd, Nov. 1992.
*/
#ifndef _ASM_MPC1211_DMA_H
#define _ASM_MPC1211_DMA_H
#include <linux/spinlock.h> /* And spinlocks */
#include <asm/io.h> /* need byte IO */
#include <linux/delay.h>
#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
#define dma_outb outb_p
#else
#define dma_outb outb
#endif
#define dma_inb inb
/*
* NOTES about DMA transfers:
*
* controller 1: channels 0-3, byte operations, ports 00-1F
* controller 2: channels 4-7, word operations, ports C0-DF
*
* - ALL registers are 8 bits only, regardless of transfer size
* - channel 4 is not used - cascades 1 into 2.
* - channels 0-3 are byte - addresses/counts are for physical bytes
* - channels 5-7 are word - addresses/counts are for physical words
* - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
* - transfer count loaded to registers is 1 less than actual count
* - controller 2 offsets are all even (2x offsets for controller 1)
* - page registers for 5-7 don't use data bit 0, represent 128K pages
* - page registers for 0-3 use bit 0, represent 64K pages
*
* DMA transfers are limited to the lower 16MB of _physical_ memory.
* Note that addresses loaded into registers must be _physical_ addresses,
* not logical addresses (which may differ if paging is active).
*
* Address mapping for channels 0-3:
*
* A23 ... A16 A15 ... A8 A7 ... A0 (Physical addresses)
* | ... | | ... | | ... |
* | ... | | ... | | ... |
* | ... | | ... | | ... |
* P7 ... P0 A7 ... A0 A7 ... A0
* | Page | Addr MSB | Addr LSB | (DMA registers)
*
* Address mapping for channels 5-7:
*
* A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0 (Physical addresses)
* | ... | \ \ ... \ \ \ ... \ \
* | ... | \ \ ... \ \ \ ... \ (not used)
* | ... | \ \ ... \ \ \ ... \
* P7 ... P1 (0) A7 A6 ... A0 A7 A6 ... A0
* | Page | Addr MSB | Addr LSB | (DMA registers)
*
* Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
* and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
* the hardware level, so odd-byte transfers aren't possible).
*
* Transfer count (_not # bytes_) is limited to 64K, represented as actual
* count - 1 : 64K => 0xFFFF, 1 => 0x0000. Thus, count is always 1 or more,
* and up to 128K bytes may be transferred on channels 5-7 in one operation.
*
*/
#define MAX_DMA_CHANNELS 8
/* The maximum address that we can perform a DMA transfer to on this platform */
#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x10000000)
/* 8237 DMA controllers */
#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */
#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */
/* DMA controller registers */
#define DMA1_CMD_REG 0x08 /* command register (w) */
#define DMA1_STAT_REG 0x08 /* status register (r) */
#define DMA1_REQ_REG 0x09 /* request register (w) */
#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */
#define DMA1_MODE_REG 0x0B /* mode register (w) */
#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */
#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */
#define DMA1_RESET_REG 0x0D /* Master Clear (w) */
#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */
#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */
#define DMA2_CMD_REG 0xD0 /* command register (w) */
#define DMA2_STAT_REG 0xD0 /* status register (r) */
#define DMA2_REQ_REG 0xD2 /* request register (w) */
#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */
#define DMA2_MODE_REG 0xD6 /* mode register (w) */
#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */
#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */
#define DMA2_RESET_REG 0xDA /* Master Clear (w) */
#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */
#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */
#define DMA_ADDR_0 0x00 /* DMA address registers */
#define DMA_ADDR_1 0x02
#define DMA_ADDR_2 0x04
#define DMA_ADDR_3 0x06
#define DMA_ADDR_4 0xC0
#define DMA_ADDR_5 0xC4
#define DMA_ADDR_6 0xC8
#define DMA_ADDR_7 0xCC
#define DMA_CNT_0 0x01 /* DMA count registers */
#define DMA_CNT_1 0x03
#define DMA_CNT_2 0x05
#define DMA_CNT_3 0x07
#define DMA_CNT_4 0xC2
#define DMA_CNT_5 0xC6
#define DMA_CNT_6 0xCA
#define DMA_CNT_7 0xCE
#define DMA_PAGE_0 0x87 /* DMA page registers */
#define DMA_PAGE_1 0x83
#define DMA_PAGE_2 0x81
#define DMA_PAGE_3 0x82
#define DMA_PAGE_5 0x8B
#define DMA_PAGE_6 0x89
#define DMA_PAGE_7 0x8A
#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */
#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */
#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */
#define DMA_AUTOINIT 0x10
extern spinlock_t dma_spin_lock;
static __inline__ unsigned long claim_dma_lock(void)
{
unsigned long flags;
spin_lock_irqsave(&dma_spin_lock, flags);
return flags;
}
static __inline__ void release_dma_lock(unsigned long flags)
{
spin_unlock_irqrestore(&dma_spin_lock, flags);
}
/* enable/disable a specific DMA channel */
static __inline__ void enable_dma(unsigned int dmanr)
{
if (dmanr<=3)
dma_outb(dmanr, DMA1_MASK_REG);
else
dma_outb(dmanr & 3, DMA2_MASK_REG);
}
static __inline__ void disable_dma(unsigned int dmanr)
{
if (dmanr<=3)
dma_outb(dmanr | 4, DMA1_MASK_REG);
else
dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
}
/* Clear the 'DMA Pointer Flip Flop'.
* Write 0 for LSB/MSB, 1 for MSB/LSB access.
* Use this once to initialize the FF to a known state.
* After that, keep track of it. :-)
* --- In order to do that, the DMA routines below should ---
* --- only be used while holding the DMA lock ! ---
*/
static __inline__ void clear_dma_ff(unsigned int dmanr)
{
if (dmanr<=3)
dma_outb(0, DMA1_CLEAR_FF_REG);
else
dma_outb(0, DMA2_CLEAR_FF_REG);
}
/* set mode (above) for a specific DMA channel */
static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
{
if (dmanr<=3)
dma_outb(mode | dmanr, DMA1_MODE_REG);
else
dma_outb(mode | (dmanr&3), DMA2_MODE_REG);
}
/* Set only the page register bits of the transfer address.
* This is used for successive transfers when we know the contents of
* the lower 16 bits of the DMA current address register, but a 64k boundary
* may have been crossed.
*/
static __inline__ void set_dma_page(unsigned int dmanr, unsigned int pagenr)
{
switch(dmanr) {
case 0:
dma_outb( pagenr & 0xff, DMA_PAGE_0);
dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_0 + 0x400);
break;
case 1:
dma_outb( pagenr & 0xff, DMA_PAGE_1);
dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_1 + 0x400);
break;
case 2:
dma_outb( pagenr & 0xff, DMA_PAGE_2);
dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_2 + 0x400);
break;
case 3:
dma_outb( pagenr & 0xff, DMA_PAGE_3);
dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_3 + 0x400);
break;
case 5:
dma_outb( pagenr & 0xfe, DMA_PAGE_5);
dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_5 + 0x400);
break;
case 6:
dma_outb( pagenr & 0xfe, DMA_PAGE_6);
dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_6 + 0x400);
break;
case 7:
dma_outb( pagenr & 0xfe, DMA_PAGE_7);
dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_7 + 0x400);
break;
}
}
/* Set transfer address & page bits for specific DMA channel.
* Assumes dma flipflop is clear.
*/
static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
{
set_dma_page(dmanr, a>>16);
if (dmanr <= 3) {
dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
} else {
dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
}
}
/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
* a specific DMA channel.
* You must ensure the parameters are valid.
* NOTE: from a manual: "the number of transfers is one more
* than the initial word count"! This is taken into account.
* Assumes dma flip-flop is clear.
* NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
*/
static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
{
count--;
if (dmanr <= 3) {
dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
} else {
dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
}
}
/* Get DMA residue count. After a DMA transfer, this
* should return zero. Reading this while a DMA transfer is
* still in progress will return unpredictable results.
* If called before the channel has been used, it may return 1.
* Otherwise, it returns the number of _bytes_ left to transfer.
*
* Assumes DMA flip-flop is clear.
*/
static __inline__ int get_dma_residue(unsigned int dmanr)
{
unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
: ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
/* using short to get 16-bit wrap around */
unsigned short count;
count = 1 + dma_inb(io_port);
count += dma_inb(io_port) << 8;
return (dmanr<=3)? count : (count<<1);
}
/* These are in kernel/dma.c: */
extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
extern void free_dma(unsigned int dmanr); /* release it again */
/* From PCI */
#ifdef CONFIG_PCI
extern int isa_dma_bridge_buggy;
#else
#define isa_dma_bridge_buggy (0)
#endif
#endif /* _ASM_MPC1211_DMA_H */

View file

@ -1,22 +0,0 @@
/*
* include/asm-sh/mpc1211/io.h
*
* Copyright 2001 Saito.K & Jeanne
*
* IO functions for an Interface MPC-1211
*/
#ifndef _ASM_SH_IO_MPC1211_H
#define _ASM_SH_IO_MPC1211_H
#include <linux/time.h>
extern int mpc1211_irq_demux(int irq);
extern void init_mpc1211_IRQ(void);
extern void heartbeat_mpc1211(void);
extern void mpc1211_rtc_gettimeofday(struct timeval *tv);
extern int mpc1211_rtc_settimeofday(const struct timeval *tv);
#endif /* _ASM_SH_IO_MPC1211_H */

View file

@ -1,60 +0,0 @@
/*
* MPC1211 specific keybord definitions
* Taken from the old asm-i386/keybord.h for PC/AT-style definitions
* created 3 Nov 1996 by Geert Uytterhoeven.
*/
#ifdef __KERNEL__
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/kd.h>
#include <linux/pm.h>
#include <asm/io.h>
#define KEYBOARD_IRQ 1
#define DISABLE_KBD_DURING_INTERRUPTS 0
extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode);
extern int pckbd_getkeycode(unsigned int scancode);
extern int pckbd_translate(unsigned char scancode, unsigned char *keycode,
char raw_mode);
extern char pckbd_unexpected_up(unsigned char keycode);
extern void pckbd_leds(unsigned char leds);
extern void pckbd_init_hw(void);
extern int pckbd_pm_resume(struct pm_dev *, pm_request_t, void *);
extern pm_callback pm_kbd_request_override;
#define kbd_setkeycode pckbd_setkeycode
#define kbd_getkeycode pckbd_getkeycode
#define kbd_translate pckbd_translate
#define kbd_unexpected_up pckbd_unexpected_up
#define kbd_leds pckbd_leds
#define kbd_init_hw pckbd_init_hw
/* resource allocation */
#define kbd_request_region()
#define kbd_request_irq(handler) request_irq(KEYBOARD_IRQ, handler, 0, \
"keyboard", NULL)
/* How to access the keyboard macros on this platform. */
#define kbd_read_input() inb(KBD_DATA_REG)
#define kbd_read_status() inb(KBD_STATUS_REG)
#define kbd_write_output(val) outb(val, KBD_DATA_REG)
#define kbd_write_command(val) outb(val, KBD_CNTL_REG)
/* Some stoneage hardware needs delays after some operations. */
#define kbd_pause() do { } while(0)
/*
* Machine specific bits for the PS/2 driver
*/
#define AUX_IRQ 12
#define aux_request_irq(hand, dev_id) \
request_irq(AUX_IRQ, hand, IRQF_SHARED, "PS2 Mouse", dev_id)
#define aux_free_irq(dev_id) free_irq(AUX_IRQ, dev_id)
#endif /* __KERNEL__ */

View file

@ -1,200 +0,0 @@
#ifndef __ASM_SH_M1543C_H
#define __ASM_SH_M1543C_H
/*
* linux/include/asm-sh/m1543c.h
* Copyright (C) 2001 Nobuhiro Sakawa
* M1543C:PCI-ISA Bus Bridge with Super IO Chip support
*
* from
*
* linux/include/asm-sh/smc37c93x.h
*
* Copyright (C) 2000 Kazumoto Kojima
*
* SMSC 37C93x Super IO Chip support
*/
/* Default base I/O address */
#define FDC_PRIMARY_BASE 0x3f0
#define IDE1_PRIMARY_BASE 0x1f0
#define IDE1_SECONDARY_BASE 0x170
#define PARPORT_PRIMARY_BASE 0x378
#define COM1_PRIMARY_BASE 0x2f8
#define COM2_PRIMARY_BASE 0x3f8
#define COM3_PRIMARY_BASE 0x3e8
#define RTC_PRIMARY_BASE 0x070
#define KBC_PRIMARY_BASE 0x060
#define AUXIO_PRIMARY_BASE 0x000 /* XXX */
#define I8259_M_CR 0x20
#define I8259_M_MR 0x21
#define I8259_S_CR 0xa0
#define I8259_S_MR 0xa1
/* Logical device number */
#define LDN_FDC 0
#define LDN_IDE1 1
#define LDN_IDE2 2
#define LDN_PARPORT 3
#define LDN_COM1 4
#define LDN_COM2 5
#define LDN_COM3 11
#define LDN_RTC 6
#define LDN_KBC 7
/* Configuration port and key */
#define CONFIG_PORT 0x3f0
#define INDEX_PORT CONFIG_PORT
#define DATA_PORT 0x3f1
#define CONFIG_ENTER1 0x51
#define CONFIG_ENTER2 0x23
#define CONFIG_EXIT 0xbb
/* Configuration index */
#define CURRENT_LDN_INDEX 0x07
#define POWER_CONTROL_INDEX 0x22
#define ACTIVATE_INDEX 0x30
#define IO_BASE_HI_INDEX 0x60
#define IO_BASE_LO_INDEX 0x61
#define IRQ_SELECT_INDEX 0x70
#define PS2_IRQ_INDEX 0x72
#define DMA_SELECT_INDEX 0x74
/* UART stuff. Only for debugging. */
/* UART Register */
#define UART_RBR 0x0 /* Receiver Buffer Register (Read Only) */
#define UART_THR 0x0 /* Transmitter Holding Register (Write Only) */
#define UART_IER 0x2 /* Interrupt Enable Register */
#define UART_IIR 0x4 /* Interrupt Ident Register (Read Only) */
#define UART_FCR 0x4 /* FIFO Control Register (Write Only) */
#define UART_LCR 0x6 /* Line Control Register */
#define UART_MCR 0x8 /* MODEM Control Register */
#define UART_LSR 0xa /* Line Status Register */
#define UART_MSR 0xc /* MODEM Status Register */
#define UART_SCR 0xe /* Scratch Register */
#define UART_DLL 0x0 /* Divisor Latch (LS) */
#define UART_DLM 0x2 /* Divisor Latch (MS) */
#ifndef __ASSEMBLY__
typedef struct uart_reg {
volatile __u16 rbr;
volatile __u16 ier;
volatile __u16 iir;
volatile __u16 lcr;
volatile __u16 mcr;
volatile __u16 lsr;
volatile __u16 msr;
volatile __u16 scr;
} uart_reg;
#endif /* ! __ASSEMBLY__ */
/* Alias for Write Only Register */
#define thr rbr
#define tcr iir
/* Alias for Divisor Latch Register */
#define dll rbr
#define dlm ier
#define fcr iir
/* Interrupt Enable Register */
#define IER_ERDAI 0x0100 /* Enable Received Data Available Interrupt */
#define IER_ETHREI 0x0200 /* Enable Transmitter Holding Register Empty Interrupt */
#define IER_ELSI 0x0400 /* Enable Receiver Line Status Interrupt */
#define IER_EMSI 0x0800 /* Enable MODEM Status Interrupt */
/* Interrupt Ident Register */
#define IIR_IP 0x0100 /* "0" if Interrupt Pending */
#define IIR_IIB0 0x0200 /* Interrupt ID Bit 0 */
#define IIR_IIB1 0x0400 /* Interrupt ID Bit 1 */
#define IIR_IIB2 0x0800 /* Interrupt ID Bit 2 */
#define IIR_FIFO 0xc000 /* FIFOs enabled */
/* FIFO Control Register */
#define FCR_FEN 0x0100 /* FIFO enable */
#define FCR_RFRES 0x0200 /* Receiver FIFO reset */
#define FCR_TFRES 0x0400 /* Transmitter FIFO reset */
#define FCR_DMA 0x0800 /* DMA mode select */
#define FCR_RTL 0x4000 /* Receiver triger (LSB) */
#define FCR_RTM 0x8000 /* Receiver triger (MSB) */
/* Line Control Register */
#define LCR_WLS0 0x0100 /* Word Length Select Bit 0 */
#define LCR_WLS1 0x0200 /* Word Length Select Bit 1 */
#define LCR_STB 0x0400 /* Number of Stop Bits */
#define LCR_PEN 0x0800 /* Parity Enable */
#define LCR_EPS 0x1000 /* Even Parity Select */
#define LCR_SP 0x2000 /* Stick Parity */
#define LCR_SB 0x4000 /* Set Break */
#define LCR_DLAB 0x8000 /* Divisor Latch Access Bit */
/* MODEM Control Register */
#define MCR_DTR 0x0100 /* Data Terminal Ready */
#define MCR_RTS 0x0200 /* Request to Send */
#define MCR_OUT1 0x0400 /* Out 1 */
#define MCR_IRQEN 0x0800 /* IRQ Enable */
#define MCR_LOOP 0x1000 /* Loop */
/* Line Status Register */
#define LSR_DR 0x0100 /* Data Ready */
#define LSR_OE 0x0200 /* Overrun Error */
#define LSR_PE 0x0400 /* Parity Error */
#define LSR_FE 0x0800 /* Framing Error */
#define LSR_BI 0x1000 /* Break Interrupt */
#define LSR_THRE 0x2000 /* Transmitter Holding Register Empty */
#define LSR_TEMT 0x4000 /* Transmitter Empty */
#define LSR_FIFOE 0x8000 /* Receiver FIFO error */
/* MODEM Status Register */
#define MSR_DCTS 0x0100 /* Delta Clear to Send */
#define MSR_DDSR 0x0200 /* Delta Data Set Ready */
#define MSR_TERI 0x0400 /* Trailing Edge Ring Indicator */
#define MSR_DDCD 0x0800 /* Delta Data Carrier Detect */
#define MSR_CTS 0x1000 /* Clear to Send */
#define MSR_DSR 0x2000 /* Data Set Ready */
#define MSR_RI 0x4000 /* Ring Indicator */
#define MSR_DCD 0x8000 /* Data Carrier Detect */
/* Baud Rate Divisor */
#define UART_CLK (1843200) /* 1.8432 MHz */
#define UART_BAUD(x) (UART_CLK / (16 * (x)))
/* RTC register definition */
#define RTC_SECONDS 0
#define RTC_SECONDS_ALARM 1
#define RTC_MINUTES 2
#define RTC_MINUTES_ALARM 3
#define RTC_HOURS 4
#define RTC_HOURS_ALARM 5
#define RTC_DAY_OF_WEEK 6
#define RTC_DAY_OF_MONTH 7
#define RTC_MONTH 8
#define RTC_YEAR 9
#define RTC_FREQ_SELECT 10
# define RTC_UIP 0x80
# define RTC_DIV_CTL 0x70
/* This RTC can work under 32.768KHz clock only. */
# define RTC_OSC_ENABLE 0x20
# define RTC_OSC_DISABLE 0x00
#define RTC_CONTROL 11
# define RTC_SET 0x80
# define RTC_PIE 0x40
# define RTC_AIE 0x20
# define RTC_UIE 0x10
# define RTC_SQWE 0x08
# define RTC_DM_BINARY 0x04
# define RTC_24H 0x02
# define RTC_DST_EN 0x01
#endif /* __ASM_SH_M1543C_H */

View file

@ -1,6 +0,0 @@
/*
* MPC1211 uses PC/AT style RTC definitions.
*/
#include <asm-x86/mc146818rtc_32.h>

View file

@ -1,18 +0,0 @@
#ifndef __ASM_SH_MPC1211_H
#define __ASM_SH_MPC1211_H
/*
* linux/include/asm-sh/mpc1211.h
*
* Copyright (C) 2001 Saito.K & Jeanne
*
* Interface MPC-1211 support
*/
#define PA_PCI_IO (0xa4000000) /* PCI I/O space */
#define PA_PCI_MEM (0xb0000000) /* PCI MEM space */
#define PCIPAR (0xa4000cf8) /* PCI Config address */
#define PCIPDR (0xa4000cfc) /* PCI Config data */
#endif /* __ASM_SH_MPC1211_H */

View file

@ -1,38 +0,0 @@
/*
* Low-Level PCI Support for MPC-1211
*
* (c) 2002 Saito.K & Jeanne
*
*/
#ifndef _PCI_MPC1211_H_
#define _PCI_MPC1211_H_
#include <linux/pci.h>
/* set debug level 4=verbose...1=terse */
//#define DEBUG_PCI 3
#undef DEBUG_PCI
#ifdef DEBUG_PCI
#define PCIDBG(n, x...) { if(DEBUG_PCI>=n) printk(x); }
#else
#define PCIDBG(n, x...)
#endif
/* startup values */
#define PCI_PROBE_BIOS 1
#define PCI_PROBE_CONF1 2
#define PCI_PROBE_CONF2 4
#define PCI_NO_CHECKS 0x400
#define PCI_ASSIGN_ROMS 0x1000
#define PCI_BIOS_IRQ_SCAN 0x2000
/* MPC-1211 Specific Values */
#define PCIPAR (0xa4000cf8) /* PCI Config address */
#define PCIPDR (0xa4000cfc) /* PCI Config data */
#define PA_PCI_IO (0xa4000000) /* PCI I/O space */
#define PA_PCI_MEM (0xb0000000) /* PCI MEM space */
#endif /* _PCI_MPC1211_H_ */

View file

@ -193,8 +193,6 @@
#define IRQ_SCIF0 (HL_FPGA_IRQ_BASE + 15)
#define IRQ_SCIF1 (HL_FPGA_IRQ_BASE + 16)
unsigned char *highlander_init_irq_r7780mp(void);
unsigned char *highlander_init_irq_r7780rp(void);
unsigned char *highlander_init_irq_r7785rp(void);
unsigned char *highlander_plat_irq_setup(void);
#endif /* __ASM_SH_RENESAS_R7780RP */

View file

@ -56,6 +56,7 @@ static inline void __flush_tlb_slot(unsigned long long slot)
__asm__ __volatile__ ("putcfg %0, 0, r63\n" : : "r" (slot));
}
#ifdef CONFIG_MMU
/* arch/sh64/mm/tlb.c */
int sh64_tlb_init(void);
unsigned long long sh64_next_free_dtlb_entry(void);
@ -64,6 +65,13 @@ int sh64_put_wired_dtlb_entry(unsigned long long entry);
void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr,
unsigned long asid, unsigned long paddr);
void sh64_teardown_tlb_slot(unsigned long long config_addr);
#else
#define sh64_tlb_init() do { } while (0)
#define sh64_next_free_dtlb_entry() (0)
#define sh64_get_wired_dtlb_entry() (0)
#define sh64_put_wired_dtlb_entry(entry) do { } while (0)
#define sh64_setup_tlb_slot(conf, virt, asid, phys) do { } while (0)
#define sh64_teardown_tlb_slot(addr) do { } while (0)
#endif /* CONFIG_MMU */
#endif /* __ASSEMBLY__ */
#endif /* __ASM_SH_TLB_64_H */

View file

@ -29,6 +29,17 @@
.nr_balance_failed = 0, \
}
#define cpu_to_node(cpu) ((void)(cpu),0)
#define parent_node(node) ((void)(node),0)
#define node_to_cpumask(node) ((void)node, cpu_online_map)
#define node_to_first_cpu(node) ((void)(node),0)
#define pcibus_to_node(bus) ((void)(bus), -1)
#define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \
CPU_MASK_ALL : \
node_to_cpumask(pcibus_to_node(bus)) \
)
#endif
#include <asm-generic/topology.h>

View file

@ -274,7 +274,9 @@ struct exception_table_entry
unsigned long insn, fixup;
};
#ifdef CONFIG_MMU
#define ARCH_HAS_SEARCH_EXTABLE
#endif
/* Returns 0 if exception not found and fixup.unit otherwise. */
extern unsigned long search_exception_table(unsigned long addr);