diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index fbbad6446741..beddd1a8d09d 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -121,6 +121,8 @@ microchip,mcp4662-502 Microchip 8-bit Dual I2C Digital Potentiometer with NV Mem microchip,mcp4662-103 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (10k) microchip,mcp4662-503 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (50k) microchip,mcp4662-104 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k) +microchip,tc654 PWM Fan Speed Controller With Fan Fault Detection +microchip,tc655 PWM Fan Speed Controller With Fan Fault Detection national,lm63 Temperature sensor with integrated fan control national,lm75 I2C TEMP SENSOR national,lm80 Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor diff --git a/Documentation/hwmon/tc654 b/Documentation/hwmon/tc654 new file mode 100644 index 000000000000..91a2843f5f98 --- /dev/null +++ b/Documentation/hwmon/tc654 @@ -0,0 +1,31 @@ +Kernel driver tc654 +=================== + +Supported chips: + * Microship TC654 and TC655 + Prefix: 'tc654' + Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/20001734C.pdf + +Authors: + Chris Packham + Masahiko Iwamoto + +Description +----------- +This driver implements support for the Microchip TC654 and TC655. + +The TC654 uses the 2-wire interface compatible with the SMBUS 2.0 +specification. The TC654 has two (2) inputs for measuring fan RPM and +one (1) PWM output which can be used for fan control. + +Configuration Notes +------------------- +Ordinarily the pwm1_mode ABI is used for controlling the pwm output +mode. However, for this chip the output is always pwm, and the +pwm1_mode determines if the pwm output is controlled via the pwm1 value +or via the Vin analog input. + + +Setting pwm1_mode to 1 will cause the pwm output to be driven based on +the pwm1 value. Setting pwm1_mode to 0 will cause the pwm output to be +driven based on the Vin input. diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 45cef3d2c75c..8681bc65cde5 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -907,6 +907,17 @@ config SENSORS_MCP3021 This driver can also be built as a module. If so, the module will be called mcp3021. +config SENSORS_TC654 + tristate "Microchip TC654/TC655 and compatibles" + depends on I2C + help + If you say yes here you get support for TC654 and TC655. + The TC654 and TC655 are PWM mode fan speed controllers with + FanSense technology for use with brushless DC fans. + + This driver can also be built as a module. If so, the module + will be called tc654. + config SENSORS_MENF21BMC_HWMON tristate "MEN 14F021P00 BMC Hardware Monitoring" depends on MFD_MENF21BMC diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index aecf4ba17460..c651f0f1d047 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -122,6 +122,7 @@ obj-$(CONFIG_SENSORS_MAX6697) += max6697.o obj-$(CONFIG_SENSORS_MAX31790) += max31790.o obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o obj-$(CONFIG_SENSORS_MCP3021) += mcp3021.o +obj-$(CONFIG_SENSORS_TC654) += tc654.o obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o obj-$(CONFIG_SENSORS_NCT6683) += nct6683.o obj-$(CONFIG_SENSORS_NCT6775) += nct6775.o diff --git a/drivers/hwmon/tc654.c b/drivers/hwmon/tc654.c new file mode 100644 index 000000000000..18136e1f95fd --- /dev/null +++ b/drivers/hwmon/tc654.c @@ -0,0 +1,514 @@ +/* + * tc654.c - Linux kernel modules for fan speed controller + * + * Copyright (C) 2016 Allied Telesis Labs NZ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +enum tc654_regs { + TC654_REG_RPM1 = 0x00, /* RPM Output 1 */ + TC654_REG_RPM2 = 0x01, /* RPM Output 2 */ + TC654_REG_FAN_FAULT1 = 0x02, /* Fan Fault 1 Threshold */ + TC654_REG_FAN_FAULT2 = 0x03, /* Fan Fault 2 Threshold */ + TC654_REG_CONFIG = 0x04, /* Configuration */ + TC654_REG_STATUS = 0x05, /* Status */ + TC654_REG_DUTY_CYCLE = 0x06, /* Fan Speed Duty Cycle */ + TC654_REG_MFR_ID = 0x07, /* Manufacturer Identification */ + TC654_REG_VER_ID = 0x08, /* Version Identification */ +}; + +/* Macros to easily index the registers */ +#define TC654_REG_RPM(idx) (TC654_REG_RPM1 + (idx)) +#define TC654_REG_FAN_FAULT(idx) (TC654_REG_FAN_FAULT1 + (idx)) + +/* Config register bits */ +#define TC654_REG_CONFIG_RES BIT(6) /* Resolution Selection */ +#define TC654_REG_CONFIG_DUTYC BIT(5) /* Duty Cycle Control */ +#define TC654_REG_CONFIG_SDM BIT(0) /* Shutdown Mode */ + +/* Status register bits */ +#define TC654_REG_STATUS_F2F BIT(1) /* Fan 2 Fault */ +#define TC654_REG_STATUS_F1F BIT(0) /* Fan 1 Fault */ + +/* RPM resolution for RPM Output registers */ +#define TC654_HIGH_RPM_RESOLUTION 25 /* 25 RPM resolution */ +#define TC654_LOW_RPM_RESOLUTION 50 /* 50 RPM resolution */ + +/* Convert to the fan fault RPM threshold from register value */ +#define TC654_FAN_FAULT_FROM_REG(val) ((val) * 50) /* 50 RPM resolution */ + +/* Convert to register value from the fan fault RPM threshold */ +#define TC654_FAN_FAULT_TO_REG(val) (((val) / 50) & 0xff) + +/* Register data is read (and cached) at most once per second. */ +#define TC654_UPDATE_INTERVAL HZ + +struct tc654_data { + struct i2c_client *client; + + /* update mutex */ + struct mutex update_lock; + + /* tc654 register cache */ + bool valid; + unsigned long last_updated; /* in jiffies */ + + u8 rpm_output[2]; /* The fan RPM data for fans 1 and 2 is then + * written to registers RPM1 and RPM2 + */ + u8 fan_fault[2]; /* The Fan Fault Threshold Registers are used to + * set the fan fault threshold levels for fan 1 + * and fan 2 + */ + u8 config; /* The Configuration Register is an 8-bit read/ + * writable multi-function control register + * 7: Fan Fault Clear + * 1 = Clear Fan Fault + * 0 = Normal Operation (default) + * 6: Resolution Selection for RPM Output Registers + * RPM Output Registers (RPM1 and RPM2) will be + * set for + * 1 = 25 RPM (9-bit) resolution + * 0 = 50 RPM (8-bit) resolution (default) + * 5: Duty Cycle Control Method + * The V OUT duty cycle will be controlled via + * 1 = the SMBus interface. + * 0 = via the V IN analog input pin. (default) + * 4,3: Fan 2 Pulses Per Rotation + * 00 = 1 + * 01 = 2 (default) + * 10 = 4 + * 11 = 8 + * 2,1: Fan 1 Pulses Per Rotation + * 00 = 1 + * 01 = 2 (default) + * 10 = 4 + * 11 = 8 + * 0: Shutdown Mode + * 1 = Shutdown mode. + * 0 = Normal operation. (default) + */ + u8 status; /* The Status register provides all the information + * about what is going on within the TC654/TC655 + * devices. + * 7,6: Unimplemented, Read as '0' + * 5: Over-Temperature Fault Condition + * 1 = Over-Temperature condition has occurred + * 0 = Normal operation. V IN is less than 2.6V + * 4: RPM2 Counter Overflow + * 1 = Fault condition + * 0 = Normal operation + * 3: RPM1 Counter Overflow + * 1 = Fault condition + * 0 = Normal operation + * 2: V IN Input Status + * 1 = V IN is open + * 0 = Normal operation. voltage present at V IN + * 1: Fan 2 Fault + * 1 = Fault condition + * 0 = Normal operation + * 0: Fan 1 Fault + * 1 = Fault condition + * 0 = Normal operation + */ + u8 duty_cycle; /* The DUTY_CYCLE register is a 4-bit read/ + * writable register used to control the duty + * cycle of the V OUT output. + */ +}; + +/* helper to grab and cache data, at most one time per second */ +static struct tc654_data *tc654_update_client(struct device *dev) +{ + struct tc654_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int ret = 0; + + mutex_lock(&data->update_lock); + if (time_before(jiffies, data->last_updated + TC654_UPDATE_INTERVAL) && + likely(data->valid)) + goto out; + + ret = i2c_smbus_read_byte_data(client, TC654_REG_RPM(0)); + if (ret < 0) + goto out; + data->rpm_output[0] = ret; + + ret = i2c_smbus_read_byte_data(client, TC654_REG_RPM(1)); + if (ret < 0) + goto out; + data->rpm_output[1] = ret; + + ret = i2c_smbus_read_byte_data(client, TC654_REG_FAN_FAULT(0)); + if (ret < 0) + goto out; + data->fan_fault[0] = ret; + + ret = i2c_smbus_read_byte_data(client, TC654_REG_FAN_FAULT(1)); + if (ret < 0) + goto out; + data->fan_fault[1] = ret; + + ret = i2c_smbus_read_byte_data(client, TC654_REG_CONFIG); + if (ret < 0) + goto out; + data->config = ret; + + ret = i2c_smbus_read_byte_data(client, TC654_REG_STATUS); + if (ret < 0) + goto out; + data->status = ret; + + ret = i2c_smbus_read_byte_data(client, TC654_REG_DUTY_CYCLE); + if (ret < 0) + goto out; + data->duty_cycle = ret & 0x0f; + + data->last_updated = jiffies; + data->valid = true; +out: + mutex_unlock(&data->update_lock); + + if (ret < 0) /* upon error, encode it in return value */ + data = ERR_PTR(ret); + + return data; +} + +/* + * sysfs attributes + */ + +static ssize_t show_fan(struct device *dev, struct device_attribute *da, + char *buf) +{ + int nr = to_sensor_dev_attr(da)->index; + struct tc654_data *data = tc654_update_client(dev); + int val; + + if (IS_ERR(data)) + return PTR_ERR(data); + + if (data->config & TC654_REG_CONFIG_RES) + val = data->rpm_output[nr] * TC654_HIGH_RPM_RESOLUTION; + else + val = data->rpm_output[nr] * TC654_LOW_RPM_RESOLUTION; + + return sprintf(buf, "%d\n", val); +} + +static ssize_t show_fan_min(struct device *dev, struct device_attribute *da, + char *buf) +{ + int nr = to_sensor_dev_attr(da)->index; + struct tc654_data *data = tc654_update_client(dev); + + if (IS_ERR(data)) + return PTR_ERR(data); + + return sprintf(buf, "%d\n", + TC654_FAN_FAULT_FROM_REG(data->fan_fault[nr])); +} + +static ssize_t set_fan_min(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(da)->index; + struct tc654_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + unsigned long val; + int ret; + + if (kstrtoul(buf, 10, &val)) + return -EINVAL; + + val = clamp_val(val, 0, 12750); + + mutex_lock(&data->update_lock); + + data->fan_fault[nr] = TC654_FAN_FAULT_TO_REG(val); + ret = i2c_smbus_write_byte_data(client, TC654_REG_FAN_FAULT(nr), + data->fan_fault[nr]); + + mutex_unlock(&data->update_lock); + return ret < 0 ? ret : count; +} + +static ssize_t show_fan_alarm(struct device *dev, struct device_attribute *da, + char *buf) +{ + int nr = to_sensor_dev_attr(da)->index; + struct tc654_data *data = tc654_update_client(dev); + int val; + + if (IS_ERR(data)) + return PTR_ERR(data); + + if (nr == 0) + val = !!(data->status & TC654_REG_STATUS_F1F); + else + val = !!(data->status & TC654_REG_STATUS_F2F); + + return sprintf(buf, "%d\n", val); +} + +static const u8 TC654_FAN_PULSE_SHIFT[] = { 1, 3 }; + +static ssize_t show_fan_pulses(struct device *dev, struct device_attribute *da, + char *buf) +{ + int nr = to_sensor_dev_attr(da)->index; + struct tc654_data *data = tc654_update_client(dev); + u8 val; + + if (IS_ERR(data)) + return PTR_ERR(data); + + val = BIT((data->config >> TC654_FAN_PULSE_SHIFT[nr]) & 0x03); + return sprintf(buf, "%d\n", val); +} + +static ssize_t set_fan_pulses(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(da)->index; + struct tc654_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + u8 config; + unsigned long val; + int ret; + + if (kstrtoul(buf, 10, &val)) + return -EINVAL; + + switch (val) { + case 1: + config = 0; + break; + case 2: + config = 1; + break; + case 4: + config = 2; + break; + case 8: + config = 3; + break; + default: + return -EINVAL; + } + + mutex_lock(&data->update_lock); + + data->config &= ~(0x03 << TC654_FAN_PULSE_SHIFT[nr]); + data->config |= (config << TC654_FAN_PULSE_SHIFT[nr]); + ret = i2c_smbus_write_byte_data(client, TC654_REG_CONFIG, data->config); + + mutex_unlock(&data->update_lock); + return ret < 0 ? ret : count; +} + +static ssize_t show_pwm_mode(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct tc654_data *data = tc654_update_client(dev); + + if (IS_ERR(data)) + return PTR_ERR(data); + + return sprintf(buf, "%d\n", !!(data->config & TC654_REG_CONFIG_DUTYC)); +} + +static ssize_t set_pwm_mode(struct device *dev, + struct device_attribute *da, + const char *buf, size_t count) +{ + struct tc654_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + unsigned long val; + int ret; + + if (kstrtoul(buf, 10, &val)) + return -EINVAL; + + if (val != 0 && val != 1) + return -EINVAL; + + mutex_lock(&data->update_lock); + + if (val) + data->config |= TC654_REG_CONFIG_DUTYC; + else + data->config &= ~TC654_REG_CONFIG_DUTYC; + + ret = i2c_smbus_write_byte_data(client, TC654_REG_CONFIG, data->config); + + mutex_unlock(&data->update_lock); + return ret < 0 ? ret : count; +} + +static const int tc654_pwm_map[16] = { 77, 88, 102, 112, 124, 136, 148, 160, + 172, 184, 196, 207, 219, 231, 243, 255}; + +static ssize_t show_pwm(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct tc654_data *data = tc654_update_client(dev); + int pwm; + + if (IS_ERR(data)) + return PTR_ERR(data); + + if (data->config & TC654_REG_CONFIG_SDM) + pwm = 0; + else + pwm = tc654_pwm_map[data->duty_cycle]; + + return sprintf(buf, "%d\n", pwm); +} + +static ssize_t set_pwm(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct tc654_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + unsigned long val; + int ret; + + if (kstrtoul(buf, 10, &val)) + return -EINVAL; + if (val > 255) + return -EINVAL; + + mutex_lock(&data->update_lock); + + if (val == 0) + data->config |= TC654_REG_CONFIG_SDM; + else + data->config &= ~TC654_REG_CONFIG_SDM; + + data->duty_cycle = find_closest(val, tc654_pwm_map, + ARRAY_SIZE(tc654_pwm_map)); + + ret = i2c_smbus_write_byte_data(client, TC654_REG_CONFIG, data->config); + if (ret < 0) + goto out; + + ret = i2c_smbus_write_byte_data(client, TC654_REG_DUTY_CYCLE, + data->duty_cycle); + +out: + mutex_unlock(&data->update_lock); + return ret < 0 ? ret : count; +} + +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); +static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); +static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 0); +static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 1); +static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_fan_alarm, NULL, 0); +static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 1); +static SENSOR_DEVICE_ATTR(fan1_pulses, S_IWUSR | S_IRUGO, show_fan_pulses, + set_fan_pulses, 0); +static SENSOR_DEVICE_ATTR(fan2_pulses, S_IWUSR | S_IRUGO, show_fan_pulses, + set_fan_pulses, 1); +static SENSOR_DEVICE_ATTR(pwm1_mode, S_IWUSR | S_IRUGO, + show_pwm_mode, set_pwm_mode, 0); +static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, + set_pwm, 0); + +/* Driver data */ +static struct attribute *tc654_attrs[] = { + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &sensor_dev_attr_fan1_alarm.dev_attr.attr, + &sensor_dev_attr_fan2_alarm.dev_attr.attr, + &sensor_dev_attr_fan1_pulses.dev_attr.attr, + &sensor_dev_attr_fan2_pulses.dev_attr.attr, + &sensor_dev_attr_pwm1_mode.dev_attr.attr, + &sensor_dev_attr_pwm1.dev_attr.attr, + NULL +}; + +ATTRIBUTE_GROUPS(tc654); + +/* + * device probe and removal + */ + +static int tc654_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct tc654_data *data; + struct device *hwmon_dev; + int ret; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + data = devm_kzalloc(dev, sizeof(struct tc654_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->client = client; + mutex_init(&data->update_lock); + + ret = i2c_smbus_read_byte_data(client, TC654_REG_CONFIG); + if (ret < 0) + return ret; + + data->config = ret; + + hwmon_dev = + devm_hwmon_device_register_with_groups(dev, client->name, data, + tc654_groups); + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static const struct i2c_device_id tc654_id[] = { + {"tc654", 0}, + {"tc655", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, tc654_id); + +static struct i2c_driver tc654_driver = { + .driver = { + .name = "tc654", + }, + .probe = tc654_probe, + .id_table = tc654_id, +}; + +module_i2c_driver(tc654_driver); + +MODULE_AUTHOR("Allied Telesis Labs"); +MODULE_DESCRIPTION("Microchip TC654/TC655 driver"); +MODULE_LICENSE("GPL");