gpio: Documentation update
Update a slew of documentation files with the latest changes in the API/ABI. Again stress that sysfs is deprecated. Add all new flags and clean up and move some text. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
parent
40a3c9db08
commit
adbf02998b
|
@ -2,6 +2,7 @@ GPIO Mappings
|
|||
=============
|
||||
|
||||
This document explains how GPIOs can be assigned to given devices and functions.
|
||||
|
||||
Note that it only applies to the new descriptor-based interface. For a
|
||||
description of the deprecated integer-based GPIO interface please refer to
|
||||
gpio-legacy.txt (actually, there is no real mapping possible with the old
|
||||
|
@ -49,7 +50,7 @@ This property will make GPIOs 15, 16 and 17 available to the driver under the
|
|||
|
||||
power = gpiod_get(dev, "power", GPIOD_OUT_HIGH);
|
||||
|
||||
The led GPIOs will be active-high, while the power GPIO will be active-low (i.e.
|
||||
The led GPIOs will be active high, while the power GPIO will be active low (i.e.
|
||||
gpiod_is_active_low(power) will be true).
|
||||
|
||||
The second parameter of the gpiod_get() functions, the con_id string, has to be
|
||||
|
@ -122,9 +123,14 @@ where
|
|||
can be NULL, in which case it will match any function.
|
||||
- idx is the index of the GPIO within the function.
|
||||
- flags is defined to specify the following properties:
|
||||
* GPIOF_ACTIVE_LOW - to configure the GPIO as active-low
|
||||
* GPIOF_OPEN_DRAIN - GPIO pin is open drain type.
|
||||
* GPIOF_OPEN_SOURCE - GPIO pin is open source type.
|
||||
* GPIO_ACTIVE_HIGH - GPIO line is active high
|
||||
* GPIO_ACTIVE_LOW - GPIO line is active low
|
||||
* GPIO_OPEN_DRAIN - GPIO line ise set up as open drain
|
||||
* GPIO_OPEN_SOURCE - GPIO line is set up as open source
|
||||
* GPIO_PERSISTENT - GPIO line is persistent during
|
||||
suspend/resume and maintains its value
|
||||
* GPIO_TRANSITORY - GPIO line is transitory and may loose its
|
||||
electrical state during suspend/resume
|
||||
|
||||
In the future, these flags might be extended to support more properties.
|
||||
|
||||
|
|
|
@ -66,6 +66,15 @@ for the GPIO. Values can be:
|
|||
* GPIOD_IN to initialize the GPIO as input.
|
||||
* GPIOD_OUT_LOW to initialize the GPIO as output with a value of 0.
|
||||
* GPIOD_OUT_HIGH to initialize the GPIO as output with a value of 1.
|
||||
* GPIOD_OUT_LOW_OPEN_DRAIN same as GPIOD_OUT_LOW but also enforce the line
|
||||
to be electrically used with open drain.
|
||||
* GPIOD_OUT_HIGH_OPEN_DRAIN same as GPIOD_OUT_HIGH but also enforce the line
|
||||
to be electrically used with open drain.
|
||||
|
||||
The two last flags are used for use cases where open drain is mandatory, such
|
||||
as I2C: if the line is not already configured as open drain in the mappings
|
||||
(see board.txt), then open drain will be enforced anyway and a warning will be
|
||||
printed that the board configuration needs to be updated to match the use case.
|
||||
|
||||
Both functions return either a valid GPIO descriptor, or an error code checkable
|
||||
with IS_ERR() (they will never return a NULL pointer). -ENOENT will be returned
|
||||
|
@ -240,13 +249,58 @@ that can't be accessed from hardIRQ handlers, these calls act the same as the
|
|||
spinlock-safe calls.
|
||||
|
||||
|
||||
Active-low State and Raw GPIO Values
|
||||
------------------------------------
|
||||
Device drivers like to manage the logical state of a GPIO, i.e. the value their
|
||||
device will actually receive, no matter what lies between it and the GPIO line.
|
||||
In some cases, it might make sense to control the actual GPIO line value. The
|
||||
following set of calls ignore the active-low property of a GPIO and work on the
|
||||
raw line value:
|
||||
The active low and open drain semantics
|
||||
---------------------------------------
|
||||
As a consumer should not have to care about the physical line level, all of the
|
||||
gpiod_set_value_xxx() or gpiod_set_array_value_xxx() functions operate with
|
||||
the *logical* value. With this they take the active low property into account.
|
||||
This means that they check whether the GPIO is configured to be active low,
|
||||
and if so, they manipulate the passed value before the physical line level is
|
||||
driven.
|
||||
|
||||
The same is applicable for open drain or open source output lines: those do not
|
||||
actively drive their output high (open drain) or low (open source), they just
|
||||
switch their output to a high impedance value. The consumer should not need to
|
||||
care. (For details read about open drain in driver.txt.)
|
||||
|
||||
With this, all the gpiod_set_(array)_value_xxx() functions interpret the
|
||||
parameter "value" as "asserted" ("1") or "de-asserted" ("0"). The physical line
|
||||
level will be driven accordingly.
|
||||
|
||||
As an example, if the active low property for a dedicated GPIO is set, and the
|
||||
gpiod_set_(array)_value_xxx() passes "asserted" ("1"), the physical line level
|
||||
will be driven low.
|
||||
|
||||
To summarize:
|
||||
|
||||
Function (example) line property physical line
|
||||
gpiod_set_raw_value(desc, 0); don't care low
|
||||
gpiod_set_raw_value(desc, 1); don't care high
|
||||
gpiod_set_value(desc, 0); default (active high) low
|
||||
gpiod_set_value(desc, 1); default (active high) high
|
||||
gpiod_set_value(desc, 0); active low high
|
||||
gpiod_set_value(desc, 1); active low low
|
||||
gpiod_set_value(desc, 0); default (active high) low
|
||||
gpiod_set_value(desc, 1); default (active high) high
|
||||
gpiod_set_value(desc, 0); open drain low
|
||||
gpiod_set_value(desc, 1); open drain high impedance
|
||||
gpiod_set_value(desc, 0); open source high impedance
|
||||
gpiod_set_value(desc, 1); open source high
|
||||
|
||||
It is possible to override these semantics using the *set_raw/'get_raw functions
|
||||
but it should be avoided as much as possible, especially by system-agnostic drivers
|
||||
which should not need to care about the actual physical line level and worry about
|
||||
the logical value instead.
|
||||
|
||||
|
||||
Accessing raw GPIO values
|
||||
-------------------------
|
||||
Consumers exist that need to manage the logical state of a GPIO line, i.e. the value
|
||||
their device will actually receive, no matter what lies between it and the GPIO
|
||||
line.
|
||||
|
||||
The following set of calls ignore the active-low or open drain property of a GPIO and
|
||||
work on the raw line value:
|
||||
|
||||
int gpiod_get_raw_value(const struct gpio_desc *desc)
|
||||
void gpiod_set_raw_value(struct gpio_desc *desc, int value)
|
||||
|
@ -254,45 +308,12 @@ raw line value:
|
|||
void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value)
|
||||
int gpiod_direction_output_raw(struct gpio_desc *desc, int value)
|
||||
|
||||
The active-low state of a GPIO can also be queried using the following call:
|
||||
The active low state of a GPIO can also be queried using the following call:
|
||||
|
||||
int gpiod_is_active_low(const struct gpio_desc *desc)
|
||||
|
||||
Note that these functions should only be used with great moderation ; a driver
|
||||
should not have to care about the physical line level.
|
||||
|
||||
|
||||
The active-low property
|
||||
-----------------------
|
||||
|
||||
As a driver should not have to care about the physical line level, all of the
|
||||
gpiod_set_value_xxx() or gpiod_set_array_value_xxx() functions operate with
|
||||
the *logical* value. With this they take the active-low property into account.
|
||||
This means that they check whether the GPIO is configured to be active-low,
|
||||
and if so, they manipulate the passed value before the physical line level is
|
||||
driven.
|
||||
|
||||
With this, all the gpiod_set_(array)_value_xxx() functions interpret the
|
||||
parameter "value" as "active" ("1") or "inactive" ("0"). The physical line
|
||||
level will be driven accordingly.
|
||||
|
||||
As an example, if the active-low property for a dedicated GPIO is set, and the
|
||||
gpiod_set_(array)_value_xxx() passes "active" ("1"), the physical line level
|
||||
will be driven low.
|
||||
|
||||
To summarize:
|
||||
|
||||
Function (example) active-low property physical line
|
||||
gpiod_set_raw_value(desc, 0); don't care low
|
||||
gpiod_set_raw_value(desc, 1); don't care high
|
||||
gpiod_set_value(desc, 0); default (active-high) low
|
||||
gpiod_set_value(desc, 1); default (active-high) high
|
||||
gpiod_set_value(desc, 0); active-low high
|
||||
gpiod_set_value(desc, 1); active-low low
|
||||
|
||||
Please note again that the set_raw/get_raw functions should be avoided as much
|
||||
as possible, especially by drivers which should not care about the actual
|
||||
physical line level and worry about the logical value instead.
|
||||
Note that these functions should only be used with great moderation; a driver
|
||||
should not have to care about the physical line level or open drain semantics.
|
||||
|
||||
|
||||
Access multiple GPIOs with a single function call
|
||||
|
|
|
@ -88,6 +88,10 @@ ending up in the pin control back-end "behind" the GPIO controller, usually
|
|||
closer to the actual pins. This way the pin controller can manage the below
|
||||
listed GPIO configurations.
|
||||
|
||||
If a pin controller back-end is used, the GPIO controller or hardware
|
||||
description needs to provide "GPIO ranges" mapping the GPIO line offsets to pin
|
||||
numbers on the pin controller so they can properly cross-reference each other.
|
||||
|
||||
|
||||
GPIOs with debounce support
|
||||
---------------------------
|
||||
|
|
|
@ -1,6 +1,17 @@
|
|||
GPIO Sysfs Interface for Userspace
|
||||
==================================
|
||||
|
||||
THIS ABI IS DEPRECATED, THE ABI DOCUMENTATION HAS BEEN MOVED TO
|
||||
Documentation/ABI/obsolete/sysfs-gpio AND NEW USERSPACE CONSUMERS
|
||||
ARE SUPPOSED TO USE THE CHARACTER DEVICE ABI. THIS OLD SYSFS ABI WILL
|
||||
NOT BE DEVELOPED (NO NEW FEATURES), IT WILL JUST BE MAINTAINED.
|
||||
|
||||
Refer to the examples in tools/gpio/* for an introduction to the new
|
||||
character device ABI. Also see the userspace header in
|
||||
include/uapi/linux/gpio.h
|
||||
|
||||
The deprecated sysfs ABI
|
||||
------------------------
|
||||
Platforms which use the "gpiolib" implementors framework may choose to
|
||||
configure a sysfs user interface to GPIOs. This is different from the
|
||||
debugfs interface, since it provides control over GPIO direction and
|
||||
|
|
Loading…
Reference in a new issue