ARM: dts: push MMC/SD to board and add comments
This moves the enable-active-high setting from the SoC to the board for the VMMCQ regulators. It should at least be in the vicinity of the GPIO line it is defined for. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
parent
7ce7d89f48
commit
adef953bbc
|
@ -111,6 +111,7 @@
|
||||||
pinctrl-1 = <&i2c3_sleep_mode>;
|
pinctrl-1 = <&i2c3_sleep_mode>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
/* ST6G3244ME level translator for 1.8/2.9 V */
|
||||||
vmmci: regulator-gpio {
|
vmmci: regulator-gpio {
|
||||||
compatible = "regulator-gpio";
|
compatible = "regulator-gpio";
|
||||||
|
|
||||||
|
@ -120,7 +121,6 @@
|
||||||
regulator-type = "voltage";
|
regulator-type = "voltage";
|
||||||
|
|
||||||
startup-delay-us = <100>;
|
startup-delay-us = <100>;
|
||||||
enable-active-high;
|
|
||||||
|
|
||||||
states = <1800000 0x1
|
states = <1800000 0x1
|
||||||
2900000 0x0>;
|
2900000 0x0>;
|
||||||
|
|
|
@ -74,6 +74,7 @@
|
||||||
vmmci: regulator-gpio {
|
vmmci: regulator-gpio {
|
||||||
gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>;
|
gpios = <&tc3589x_gpio 18 GPIO_ACTIVE_HIGH>;
|
||||||
enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
|
enable-gpio = <&tc3589x_gpio 17 GPIO_ACTIVE_HIGH>;
|
||||||
|
enable-active-high;
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl {
|
pinctrl {
|
||||||
|
|
|
@ -146,6 +146,7 @@
|
||||||
vmmci: regulator-gpio {
|
vmmci: regulator-gpio {
|
||||||
gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
|
gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
|
||||||
enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
|
enable-gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
|
||||||
|
enable-active-high;
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl {
|
pinctrl {
|
||||||
|
|
|
@ -216,11 +216,15 @@
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
|
/* ST6G3244ME level translator for 1.8/2.9 V */
|
||||||
vmmci: regulator-gpio {
|
vmmci: regulator-gpio {
|
||||||
compatible = "regulator-gpio";
|
compatible = "regulator-gpio";
|
||||||
|
|
||||||
|
/* GPIO228 SD_SEL */
|
||||||
gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
|
gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
|
||||||
|
/* GPIO217 MMC_EN */
|
||||||
enable-gpio = <&gpio6 25 GPIO_ACTIVE_HIGH>;
|
enable-gpio = <&gpio6 25 GPIO_ACTIVE_HIGH>;
|
||||||
|
enable-active-high;
|
||||||
|
|
||||||
regulator-min-microvolt = <1800000>;
|
regulator-min-microvolt = <1800000>;
|
||||||
regulator-max-microvolt = <2900000>;
|
regulator-max-microvolt = <2900000>;
|
||||||
|
@ -228,7 +232,6 @@
|
||||||
regulator-type = "voltage";
|
regulator-type = "voltage";
|
||||||
|
|
||||||
startup-delay-us = <100>;
|
startup-delay-us = <100>;
|
||||||
enable-active-high;
|
|
||||||
|
|
||||||
states = <1800000 0x1
|
states = <1800000 0x1
|
||||||
2900000 0x0>;
|
2900000 0x0>;
|
||||||
|
@ -546,6 +549,7 @@
|
||||||
sdi0_default_mode: sdi0_default {
|
sdi0_default_mode: sdi0_default {
|
||||||
snowball_mux {
|
snowball_mux {
|
||||||
function = "mc0";
|
function = "mc0";
|
||||||
|
/* Add the DAT31 pin even if it is not really used */
|
||||||
groups = "mc0dat31dir_a_1";
|
groups = "mc0dat31dir_a_1";
|
||||||
};
|
};
|
||||||
snowball_cfg1 {
|
snowball_cfg1 {
|
||||||
|
|
Loading…
Reference in a new issue