leds-pca9633: Add support for PCA9634
Add support for PCA9634 chip, which belongs to the same family as the 9633 but with support for 8 outputs instead of 4. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Bryan Wu <cooloney@gmail.com>
This commit is contained in:
parent
daa124b1fe
commit
af67384f01
|
@ -1,24 +1,25 @@
|
|||
LEDs connected to pca9633 or pca9632
|
||||
LEDs connected to pca9632, pca9633 or pca9634
|
||||
|
||||
Required properties:
|
||||
- compatible : should be : "nxp,pca963x"
|
||||
- compatible : should be : "nxp,pca9632", "nxp,pca9633" or "nxp,pca9634"
|
||||
|
||||
Optional properties:
|
||||
- nxp,totem-pole : use totem pole (push-pull) instead of default open-drain
|
||||
- nxp,hw-blink : use hardware blinking instead of software blinking
|
||||
|
||||
Each led is represented as a sub-node of the nxp,pca9633 device.
|
||||
Each led is represented as a sub-node of the nxp,pca963x device.
|
||||
|
||||
LED sub-node properties:
|
||||
- label : (optional) see Documentation/devicetree/bindings/leds/common.txt
|
||||
- reg : number of LED line (could be from 0 to 4)
|
||||
- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633
|
||||
or 0 to 7 in pca9634)
|
||||
- linux,default-trigger : (optional)
|
||||
see Documentation/devicetree/bindings/leds/common.txt
|
||||
|
||||
Examples:
|
||||
|
||||
pca9632: pca9632 {
|
||||
compatible = "nxp,pca9632", "nxp,pca963x";
|
||||
compatible = "nxp,pca9632";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x62>;
|
||||
|
|
|
@ -292,12 +292,13 @@ config LEDS_PCA955X
|
|||
devices include PCA9550, PCA9551, PCA9552, and PCA9553.
|
||||
|
||||
config LEDS_PCA9633
|
||||
tristate "LED support for PCA9633 I2C chip"
|
||||
tristate "LED support for PCA963x I2C chip"
|
||||
depends on LEDS_CLASS
|
||||
depends on I2C
|
||||
help
|
||||
This option enables support for LEDs connected to the PCA9633
|
||||
LED driver chip accessed via the I2C bus.
|
||||
This option enables support for LEDs connected to the PCA963x
|
||||
LED driver chip accessed via the I2C bus. Supported
|
||||
devices include PCA9633 and PCA9634
|
||||
|
||||
config LEDS_WM831X_STATUS
|
||||
tristate "LED support for status LEDs on WM831x PMICs"
|
||||
|
|
|
@ -1,7 +1,9 @@
|
|||
/*
|
||||
* Copyright 2011 bct electronic GmbH
|
||||
* Copyright 2013 Qtechnology/AS
|
||||
*
|
||||
* Author: Peter Meerwald <p.meerwald@bct-electronic.com>
|
||||
* Author: Ricardo Ribalda <ricardo.ribalda@gmail.com>
|
||||
*
|
||||
* Based on leds-pca955x.c
|
||||
*
|
||||
|
@ -10,6 +12,7 @@
|
|||
* directory of this archive for more details.
|
||||
*
|
||||
* LED driver for the PCA9633 I2C LED driver (7-bit slave address 0x62)
|
||||
* LED driver for the PCA9634 I2C LED driver (7-bit slave address set by hw.)
|
||||
*
|
||||
* Note that hardware blinking violates the leds infrastructure driver
|
||||
* interface since the hardware only supports blinking all LEDs with the
|
||||
|
@ -45,16 +48,42 @@
|
|||
#define PCA9633_MODE1 0x00
|
||||
#define PCA9633_MODE2 0x01
|
||||
#define PCA9633_PWM_BASE 0x02
|
||||
#define PCA9633_GRPPWM 0x06
|
||||
#define PCA9633_GRPFREQ 0x07
|
||||
#define PCA9633_LEDOUT 0x08
|
||||
|
||||
enum pca9633_type {
|
||||
pca9633,
|
||||
pca9634,
|
||||
};
|
||||
|
||||
struct pca9633_chipdef {
|
||||
u8 grppwm;
|
||||
u8 grpfreq;
|
||||
u8 ledout_base;
|
||||
int n_leds;
|
||||
};
|
||||
|
||||
static struct pca9633_chipdef pca9633_chipdefs[] = {
|
||||
[pca9633] = {
|
||||
.grppwm = 0x6,
|
||||
.grpfreq = 0x7,
|
||||
.ledout_base = 0x8,
|
||||
.n_leds = 4,
|
||||
},
|
||||
[pca9634] = {
|
||||
.grppwm = 0xa,
|
||||
.grpfreq = 0xb,
|
||||
.ledout_base = 0xc,
|
||||
.n_leds = 8,
|
||||
},
|
||||
};
|
||||
|
||||
/* Total blink period in milliseconds */
|
||||
#define PCA9632_BLINK_PERIOD_MIN 42
|
||||
#define PCA9632_BLINK_PERIOD_MAX 10667
|
||||
|
||||
static const struct i2c_device_id pca9633_id[] = {
|
||||
{ "pca9633", 0 },
|
||||
{ "pca9632", pca9633 },
|
||||
{ "pca9633", pca9633 },
|
||||
{ "pca9634", pca9634 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, pca9633_id);
|
||||
|
@ -66,10 +95,11 @@ enum pca9633_cmd {
|
|||
|
||||
struct pca9633_led {
|
||||
struct i2c_client *client;
|
||||
struct pca9633_chipdef *chipdef;
|
||||
struct work_struct work;
|
||||
enum led_brightness brightness;
|
||||
struct led_classdev led_cdev;
|
||||
int led_num; /* 0 .. 3 potentially */
|
||||
int led_num; /* 0 .. 7 potentially */
|
||||
enum pca9633_cmd cmd;
|
||||
char name[32];
|
||||
u8 gdc;
|
||||
|
@ -78,24 +108,26 @@ struct pca9633_led {
|
|||
|
||||
static void pca9633_brightness_work(struct pca9633_led *pca9633)
|
||||
{
|
||||
u8 ledout = i2c_smbus_read_byte_data(pca9633->client, PCA9633_LEDOUT);
|
||||
int shift = 2 * pca9633->led_num;
|
||||
u8 ledout_addr = pca9633->chipdef->ledout_base + (pca9633->led_num / 4);
|
||||
u8 ledout;
|
||||
int shift = 2 * (pca9633->led_num % 4);
|
||||
u8 mask = 0x3 << shift;
|
||||
|
||||
ledout = i2c_smbus_read_byte_data(pca9633->client, ledout_addr);
|
||||
switch (pca9633->brightness) {
|
||||
case LED_FULL:
|
||||
i2c_smbus_write_byte_data(pca9633->client, PCA9633_LEDOUT,
|
||||
i2c_smbus_write_byte_data(pca9633->client, ledout_addr,
|
||||
(ledout & ~mask) | (PCA9633_LED_ON << shift));
|
||||
break;
|
||||
case LED_OFF:
|
||||
i2c_smbus_write_byte_data(pca9633->client, PCA9633_LEDOUT,
|
||||
i2c_smbus_write_byte_data(pca9633->client, ledout_addr,
|
||||
ledout & ~mask);
|
||||
break;
|
||||
default:
|
||||
i2c_smbus_write_byte_data(pca9633->client,
|
||||
PCA9633_PWM_BASE + pca9633->led_num,
|
||||
pca9633->brightness);
|
||||
i2c_smbus_write_byte_data(pca9633->client, PCA9633_LEDOUT,
|
||||
i2c_smbus_write_byte_data(pca9633->client, ledout_addr,
|
||||
(ledout & ~mask) | (PCA9633_LED_PWM << shift));
|
||||
break;
|
||||
}
|
||||
|
@ -103,15 +135,16 @@ static void pca9633_brightness_work(struct pca9633_led *pca9633)
|
|||
|
||||
static void pca9633_blink_work(struct pca9633_led *pca9633)
|
||||
{
|
||||
u8 ledout = i2c_smbus_read_byte_data(pca9633->client, PCA9633_LEDOUT);
|
||||
u8 ledout_addr = pca9633->chipdef->ledout_base + (pca9633->led_num / 4);
|
||||
u8 ledout = i2c_smbus_read_byte_data(pca9633->client, ledout_addr);
|
||||
u8 mode2 = i2c_smbus_read_byte_data(pca9633->client, PCA9633_MODE2);
|
||||
int shift = 2 * pca9633->led_num;
|
||||
int shift = 2 * (pca9633->led_num % 4);
|
||||
u8 mask = 0x3 << shift;
|
||||
|
||||
i2c_smbus_write_byte_data(pca9633->client, PCA9633_GRPPWM,
|
||||
i2c_smbus_write_byte_data(pca9633->client, pca9633->chipdef->grppwm,
|
||||
pca9633->gdc);
|
||||
|
||||
i2c_smbus_write_byte_data(pca9633->client, PCA9633_GRPFREQ,
|
||||
i2c_smbus_write_byte_data(pca9633->client, pca9633->chipdef->grpfreq,
|
||||
pca9633->gfrq);
|
||||
|
||||
if (!(mode2 & PCA9633_MODE2_DMBLNK))
|
||||
|
@ -119,7 +152,7 @@ static void pca9633_blink_work(struct pca9633_led *pca9633)
|
|||
mode2 | PCA9633_MODE2_DMBLNK);
|
||||
|
||||
if ((ledout & mask) != (PCA9633_LED_GRP_PWM << shift))
|
||||
i2c_smbus_write_byte_data(pca9633->client, PCA9633_LEDOUT,
|
||||
i2c_smbus_write_byte_data(pca9633->client, ledout_addr,
|
||||
(ledout & ~mask) | (PCA9633_LED_GRP_PWM << shift));
|
||||
}
|
||||
|
||||
|
@ -215,7 +248,7 @@ static int pca9633_blink_set(struct led_classdev *led_cdev,
|
|||
|
||||
#if IS_ENABLED(CONFIG_OF)
|
||||
static struct pca9633_platform_data *
|
||||
pca9633_dt_init(struct i2c_client *client)
|
||||
pca9633_dt_init(struct i2c_client *client, struct pca9633_chipdef *chip)
|
||||
{
|
||||
struct device_node *np = client->dev.of_node, *child;
|
||||
struct pca9633_platform_data *pdata;
|
||||
|
@ -223,11 +256,11 @@ pca9633_dt_init(struct i2c_client *client)
|
|||
int count;
|
||||
|
||||
count = of_get_child_count(np);
|
||||
if (!count || count > 4)
|
||||
if (!count || count > chip->n_leds)
|
||||
return ERR_PTR(-ENODEV);
|
||||
|
||||
pca9633_leds = devm_kzalloc(&client->dev,
|
||||
sizeof(struct led_info) * count, GFP_KERNEL);
|
||||
sizeof(struct led_info) * chip->n_leds, GFP_KERNEL);
|
||||
if (!pca9633_leds)
|
||||
return ERR_PTR(-ENOMEM);
|
||||
|
||||
|
@ -269,12 +302,14 @@ pca9633_dt_init(struct i2c_client *client)
|
|||
}
|
||||
|
||||
static const struct of_device_id of_pca9633_match[] = {
|
||||
{ .compatible = "nxp,pca963x", },
|
||||
{ .compatible = "nxp,pca9632", },
|
||||
{ .compatible = "nxp,pca9633", },
|
||||
{ .compatible = "nxp,pca9634", },
|
||||
{},
|
||||
};
|
||||
#else
|
||||
static struct pca9633_platform_data *
|
||||
pca9633_dt_init(struct i2c_client *client)
|
||||
pca9633_dt_init(struct i2c_client *client, struct pca9633_chipdef *chip)
|
||||
{
|
||||
return ERR_PTR(-ENODEV);
|
||||
}
|
||||
|
@ -285,34 +320,38 @@ static int pca9633_probe(struct i2c_client *client,
|
|||
{
|
||||
struct pca9633_led *pca9633;
|
||||
struct pca9633_platform_data *pdata;
|
||||
struct pca9633_chipdef *chip;
|
||||
int i, err;
|
||||
|
||||
chip = &pca9633_chipdefs[id->driver_data];
|
||||
pdata = dev_get_platdata(&client->dev);
|
||||
|
||||
if (!pdata) {
|
||||
pdata = pca9633_dt_init(client);
|
||||
pdata = pca9633_dt_init(client, chip);
|
||||
if (IS_ERR(pdata)) {
|
||||
dev_warn(&client->dev, "could not parse configuration\n");
|
||||
pdata = NULL;
|
||||
}
|
||||
}
|
||||
|
||||
if (pdata) {
|
||||
if (pdata->leds.num_leds <= 0 || pdata->leds.num_leds > 4) {
|
||||
dev_err(&client->dev, "board info must claim at most 4 LEDs");
|
||||
return -EINVAL;
|
||||
}
|
||||
if (pdata && (pdata->leds.num_leds < 1 ||
|
||||
pdata->leds.num_leds > chip->n_leds)) {
|
||||
dev_err(&client->dev, "board info must claim 1-%d LEDs",
|
||||
chip->n_leds);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
pca9633 = devm_kzalloc(&client->dev, 4 * sizeof(*pca9633), GFP_KERNEL);
|
||||
pca9633 = devm_kzalloc(&client->dev, chip->n_leds * sizeof(*pca9633),
|
||||
GFP_KERNEL);
|
||||
if (!pca9633)
|
||||
return -ENOMEM;
|
||||
|
||||
i2c_set_clientdata(client, pca9633);
|
||||
|
||||
for (i = 0; i < 4; i++) {
|
||||
for (i = 0; i < chip->n_leds; i++) {
|
||||
pca9633[i].client = client;
|
||||
pca9633[i].led_num = i;
|
||||
pca9633[i].chipdef = chip;
|
||||
|
||||
/* Platform data can specify LED names and default triggers */
|
||||
if (pdata && i < pdata->leds.num_leds) {
|
||||
|
@ -349,7 +388,9 @@ static int pca9633_probe(struct i2c_client *client,
|
|||
i2c_smbus_write_byte_data(client, PCA9633_MODE2, 0x01);
|
||||
|
||||
/* Turn off LEDs */
|
||||
i2c_smbus_write_byte_data(client, PCA9633_LEDOUT, 0x00);
|
||||
i2c_smbus_write_byte_data(client, chip->ledout_base, 0x00);
|
||||
if (chip->n_leds > 4)
|
||||
i2c_smbus_write_byte_data(client, chip->ledout_base + 1, 0x00);
|
||||
|
||||
return 0;
|
||||
|
||||
|
@ -367,10 +408,11 @@ static int pca9633_remove(struct i2c_client *client)
|
|||
struct pca9633_led *pca9633 = i2c_get_clientdata(client);
|
||||
int i;
|
||||
|
||||
for (i = 0; i < 4; i++) {
|
||||
led_classdev_unregister(&pca9633[i].led_cdev);
|
||||
cancel_work_sync(&pca9633[i].work);
|
||||
}
|
||||
for (i = 0; i < pca9633->chipdef->n_leds; i++)
|
||||
if (pca9633[i].client != NULL) {
|
||||
led_classdev_unregister(&pca9633[i].led_cdev);
|
||||
cancel_work_sync(&pca9633[i].work);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
Loading…
Reference in a new issue