USB: EHCI: Add MSM Host Controller driver
This patch adds support for EHCI compliant HSUSB Host controller found on MSM chips. The root hub has a single port and TT is built into it. This driver depends on OTG driver for PHY initialization, clock management and powering up VBUS. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
parent
e0c201f339
commit
b0848aea10
|
@ -64,6 +64,7 @@ config USB_ARCH_HAS_EHCI
|
|||
default y if ARCH_OMAP3
|
||||
default y if ARCH_VT8500
|
||||
default y if PLAT_SPEAR
|
||||
default y if ARCH_MSM
|
||||
default PCI
|
||||
|
||||
# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
|
||||
|
|
|
@ -141,6 +141,17 @@ config USB_EHCI_HCD_OMAP
|
|||
Enables support for the on-chip EHCI controller on
|
||||
OMAP3 and later chips.
|
||||
|
||||
config USB_EHCI_MSM
|
||||
bool "Support for MSM on-chip EHCI USB controller"
|
||||
depends on USB_EHCI_HCD && ARCH_MSM
|
||||
select USB_EHCI_ROOT_HUB_TT
|
||||
select USB_MSM_OTG_72K
|
||||
---help---
|
||||
Enables support for the USB Host controller present on the
|
||||
Qualcomm chipsets. Root Hub has inbuilt TT.
|
||||
This driver depends on OTG driver for PHY initialization,
|
||||
clock management, powering up VBUS.
|
||||
|
||||
config USB_EHCI_HCD_PPC_OF
|
||||
bool "EHCI support for PPC USB controller on OF platform bus"
|
||||
depends on USB_EHCI_HCD && PPC_OF
|
||||
|
|
|
@ -1239,6 +1239,11 @@ MODULE_LICENSE ("GPL");
|
|||
#define PLATFORM_DRIVER spear_ehci_hcd_driver
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_USB_EHCI_MSM
|
||||
#include "ehci-msm.c"
|
||||
#define PLATFORM_DRIVER ehci_msm_driver
|
||||
#endif
|
||||
|
||||
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
|
||||
!defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
|
||||
!defined(XILINX_OF_PLATFORM_DRIVER)
|
||||
|
|
290
drivers/usb/host/ehci-msm.c
Normal file
290
drivers/usb/host/ehci-msm.c
Normal file
|
@ -0,0 +1,290 @@
|
|||
/* ehci-msm.c - HSUSB Host Controller Driver Implementation
|
||||
*
|
||||
* Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
|
||||
*
|
||||
* Partly derived from ehci-fsl.c and ehci-hcd.c
|
||||
* Copyright (c) 2000-2004 by David Brownell
|
||||
* Copyright (c) 2005 MontaVista Software
|
||||
*
|
||||
* All source code in this file is licensed under the following license except
|
||||
* where indicated.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published
|
||||
* by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
*
|
||||
* See the GNU General Public License for more details.
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, you can find it at http://www.fsf.org
|
||||
*/
|
||||
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/err.h>
|
||||
|
||||
#include <linux/usb/otg.h>
|
||||
#include <linux/usb/msm_hsusb_hw.h>
|
||||
|
||||
#define MSM_USB_BASE (hcd->regs)
|
||||
|
||||
static struct otg_transceiver *otg;
|
||||
|
||||
/*
|
||||
* ehci_run defined in drivers/usb/host/ehci-hcd.c reset the controller and
|
||||
* the configuration settings in ehci_msm_reset vanish after controller is
|
||||
* reset. Resetting the controler in ehci_run seems to be un-necessary
|
||||
* provided HCD reset the controller before calling ehci_run. Most of the HCD
|
||||
* do but some are not. So this function is same as ehci_run but we don't
|
||||
* reset the controller here.
|
||||
*/
|
||||
static int ehci_msm_run(struct usb_hcd *hcd)
|
||||
{
|
||||
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
||||
u32 temp;
|
||||
u32 hcc_params;
|
||||
|
||||
hcd->uses_new_polling = 1;
|
||||
|
||||
ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
|
||||
ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);
|
||||
|
||||
/*
|
||||
* hcc_params controls whether ehci->regs->segment must (!!!)
|
||||
* be used; it constrains QH/ITD/SITD and QTD locations.
|
||||
* pci_pool consistent memory always uses segment zero.
|
||||
* streaming mappings for I/O buffers, like pci_map_single(),
|
||||
* can return segments above 4GB, if the device allows.
|
||||
*
|
||||
* NOTE: the dma mask is visible through dma_supported(), so
|
||||
* drivers can pass this info along ... like NETIF_F_HIGHDMA,
|
||||
* Scsi_Host.highmem_io, and so forth. It's readonly to all
|
||||
* host side drivers though.
|
||||
*/
|
||||
hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
|
||||
if (HCC_64BIT_ADDR(hcc_params))
|
||||
ehci_writel(ehci, 0, &ehci->regs->segment);
|
||||
|
||||
/*
|
||||
* Philips, Intel, and maybe others need CMD_RUN before the
|
||||
* root hub will detect new devices (why?); NEC doesn't
|
||||
*/
|
||||
ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
|
||||
ehci->command |= CMD_RUN;
|
||||
ehci_writel(ehci, ehci->command, &ehci->regs->command);
|
||||
dbg_cmd(ehci, "init", ehci->command);
|
||||
|
||||
/*
|
||||
* Start, enabling full USB 2.0 functionality ... usb 1.1 devices
|
||||
* are explicitly handed to companion controller(s), so no TT is
|
||||
* involved with the root hub. (Except where one is integrated,
|
||||
* and there's no companion controller unless maybe for USB OTG.)
|
||||
*
|
||||
* Turning on the CF flag will transfer ownership of all ports
|
||||
* from the companions to the EHCI controller. If any of the
|
||||
* companions are in the middle of a port reset at the time, it
|
||||
* could cause trouble. Write-locking ehci_cf_port_reset_rwsem
|
||||
* guarantees that no resets are in progress. After we set CF,
|
||||
* a short delay lets the hardware catch up; new resets shouldn't
|
||||
* be started before the port switching actions could complete.
|
||||
*/
|
||||
down_write(&ehci_cf_port_reset_rwsem);
|
||||
hcd->state = HC_STATE_RUNNING;
|
||||
ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
|
||||
ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
|
||||
usleep_range(5000, 5500);
|
||||
up_write(&ehci_cf_port_reset_rwsem);
|
||||
ehci->last_periodic_enable = ktime_get_real();
|
||||
|
||||
temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase));
|
||||
ehci_info(ehci,
|
||||
"USB %x.%x started, EHCI %x.%02x%s\n",
|
||||
((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
|
||||
temp >> 8, temp & 0xff,
|
||||
ignore_oc ? ", overcurrent ignored" : "");
|
||||
|
||||
ehci_writel(ehci, INTR_MASK,
|
||||
&ehci->regs->intr_enable); /* Turn On Interrupts */
|
||||
|
||||
/* GRR this is run-once init(), being done every time the HC starts.
|
||||
* So long as they're part of class devices, we can't do it init()
|
||||
* since the class device isn't created that early.
|
||||
*/
|
||||
create_debug_files(ehci);
|
||||
create_companion_file(ehci);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ehci_msm_reset(struct usb_hcd *hcd)
|
||||
{
|
||||
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
||||
int retval;
|
||||
|
||||
ehci->caps = USB_CAPLENGTH;
|
||||
ehci->regs = USB_CAPLENGTH +
|
||||
HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
|
||||
|
||||
/* cache the data to minimize the chip reads*/
|
||||
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
|
||||
|
||||
hcd->has_tt = 1;
|
||||
ehci->sbrn = HCD_USB2;
|
||||
|
||||
/* data structure init */
|
||||
retval = ehci_init(hcd);
|
||||
if (retval)
|
||||
return retval;
|
||||
|
||||
retval = ehci_reset(ehci);
|
||||
if (retval)
|
||||
return retval;
|
||||
|
||||
/* bursts of unspecified length. */
|
||||
writel(0, USB_AHBBURST);
|
||||
/* Use the AHB transactor */
|
||||
writel(0, USB_AHBMODE);
|
||||
/* Disable streaming mode and select host mode */
|
||||
writel(0x13, USB_USBMODE);
|
||||
|
||||
ehci_port_power(ehci, 1);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct hc_driver msm_hc_driver = {
|
||||
.description = hcd_name,
|
||||
.product_desc = "Qualcomm On-Chip EHCI Host Controller",
|
||||
.hcd_priv_size = sizeof(struct ehci_hcd),
|
||||
|
||||
/*
|
||||
* generic hardware linkage
|
||||
*/
|
||||
.irq = ehci_irq,
|
||||
.flags = HCD_USB2 | HCD_MEMORY,
|
||||
|
||||
.reset = ehci_msm_reset,
|
||||
.start = ehci_msm_run,
|
||||
|
||||
.stop = ehci_stop,
|
||||
.shutdown = ehci_shutdown,
|
||||
|
||||
/*
|
||||
* managing i/o requests and associated device resources
|
||||
*/
|
||||
.urb_enqueue = ehci_urb_enqueue,
|
||||
.urb_dequeue = ehci_urb_dequeue,
|
||||
.endpoint_disable = ehci_endpoint_disable,
|
||||
.endpoint_reset = ehci_endpoint_reset,
|
||||
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
|
||||
|
||||
/*
|
||||
* scheduling support
|
||||
*/
|
||||
.get_frame_number = ehci_get_frame,
|
||||
|
||||
/*
|
||||
* root hub support
|
||||
*/
|
||||
.hub_status_data = ehci_hub_status_data,
|
||||
.hub_control = ehci_hub_control,
|
||||
.relinquish_port = ehci_relinquish_port,
|
||||
.port_handed_over = ehci_port_handed_over,
|
||||
|
||||
/*
|
||||
* PM support
|
||||
*/
|
||||
.bus_suspend = ehci_bus_suspend,
|
||||
.bus_resume = ehci_bus_resume,
|
||||
};
|
||||
|
||||
static int ehci_msm_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct usb_hcd *hcd;
|
||||
struct resource *res;
|
||||
int ret;
|
||||
|
||||
dev_dbg(&pdev->dev, "ehci_msm proble\n");
|
||||
|
||||
hcd = usb_create_hcd(&msm_hc_driver, &pdev->dev, dev_name(&pdev->dev));
|
||||
if (!hcd) {
|
||||
dev_err(&pdev->dev, "Unable to create HCD\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
hcd->irq = platform_get_irq(pdev, 0);
|
||||
if (hcd->irq < 0) {
|
||||
dev_err(&pdev->dev, "Unable to get IRQ resource\n");
|
||||
ret = hcd->irq;
|
||||
goto put_hcd;
|
||||
}
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (!res) {
|
||||
dev_err(&pdev->dev, "Unable to get memory resource\n");
|
||||
ret = -ENODEV;
|
||||
goto put_hcd;
|
||||
}
|
||||
|
||||
hcd->rsrc_start = res->start;
|
||||
hcd->rsrc_len = resource_size(res);
|
||||
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
|
||||
if (!hcd->regs) {
|
||||
dev_err(&pdev->dev, "ioremap failed\n");
|
||||
ret = -ENOMEM;
|
||||
goto put_hcd;
|
||||
}
|
||||
|
||||
/*
|
||||
* OTG driver takes care of PHY initialization, clock management,
|
||||
* powering up VBUS and mapping of registers address space.
|
||||
*/
|
||||
otg = otg_get_transceiver();
|
||||
if (!otg) {
|
||||
dev_err(&pdev->dev, "unable to find transceiver\n");
|
||||
ret = -ENODEV;
|
||||
goto unmap;
|
||||
}
|
||||
|
||||
ret = otg_set_host(otg, &hcd->self);
|
||||
if (ret < 0) {
|
||||
dev_err(&pdev->dev, "unable to register with transceiver\n");
|
||||
goto put_transceiver;
|
||||
}
|
||||
|
||||
device_init_wakeup(&pdev->dev, 1);
|
||||
return 0;
|
||||
|
||||
put_transceiver:
|
||||
otg_put_transceiver(otg);
|
||||
unmap:
|
||||
iounmap(hcd->regs);
|
||||
put_hcd:
|
||||
usb_put_hcd(hcd);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int __devexit ehci_msm_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
||||
|
||||
device_init_wakeup(&pdev->dev, 0);
|
||||
|
||||
otg_set_host(otg, NULL);
|
||||
otg_put_transceiver(otg);
|
||||
|
||||
usb_put_hcd(hcd);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver ehci_msm_driver = {
|
||||
.probe = ehci_msm_probe,
|
||||
.remove = __devexit_p(ehci_msm_remove),
|
||||
.driver = {
|
||||
.name = "msm_hsusb_host",
|
||||
},
|
||||
};
|
Loading…
Reference in a new issue