Merge branches 'ib-mfd-gpio-4.9', 'ib-mfd-gpio-regulator-4.9', 'ib-mfd-input-4.9', 'ib-mfd-regulator-4.9', 'ib-mfd-regulator-4.9.1', 'ib-mfd-regulator-rtc-4.9', 'ib-mfd-regulator-rtc-4.9-1' and 'ib-mfd-rtc-4.9' into ibs-for-mfd-merged

2016-10-04 15:47:01 +01:00 · 2016-10-04 15:47:01 +01:00 · b304746c2a
parent c6a05a0563 f618ed218d 44051a6825 8824ee8573 cdd8da8cc6 ddc085d44d 5d2fd5c79e 04940631b8
commit b304746c2a
314 changed files with 5831 additions and 1426 deletions
--- a/Documentation/block/queue-sysfs.txt
+++ b/Documentation/block/queue-sysfs.txt
@ -14,6 +14,12 @@ add_random (RW)
 This file allows to turn off the disk entropy contribution. Default
 value of this file is '1'(on).

+dax (RO)
+--------
+This file indicates whether the device supports Direct Access (DAX),
+used by CPU-addressable storage to bypass the pagecache.  It shows '1'
+if true, '0' if not.
+
 discard_granularity (RO)
 -----------------------
 This shows the size of internal allocation of the device in bytes, if
@ -46,6 +52,12 @@ hw_sector_size (RO)
 -------------------
 This is the hardware sector size of the device, in bytes.

+io_poll (RW)
+------------
+When read, this file shows the total number of block IO polls and how
+many returned success.  Writing '0' to this file will disable polling
+for this device.  Writing any non-zero value will enable this feature.
+
 iostats (RW)
 -------------
 This file is used to control (on/off) the iostats accounting of the
@ -151,5 +163,11 @@ device state. This means that it might not be safe to toggle the
 setting from "write back" to "write through", since that will also
 eliminate cache flushes issued by the kernel.

+write_same_max_bytes (RO)
+-------------------------
+This is the number of bytes the device can write in a single write-same
+command.  A value of '0' means write-same is not supported by this
+device.
+

 Jens Axboe <jens.axboe@oracle.com>, February 2009
--- a/Documentation/devicetree/bindings/mfd/ac100.txt
+++ b/Documentation/devicetree/bindings/mfd/ac100.txt
@ -0,0 +1,54 @@
+X-Powers AC100 Codec/RTC IC Device Tree bindings
+
+AC100 is a audio codec and RTC subsystem combo IC. The 2 parts are
+separated, including power supplies and interrupt lines, but share
+a common register address space and host interface.
+
+Required properties:
+- compatible: "x-powers,ac100"
+- reg: The I2C slave address or RSB hardware address for the chip
+- sub-nodes:
+  - codec
+    - compatible:		"x-powers,ac100-codec"
+    - interrupt-parent:		The parent interrupt controller
+    - interrupts:		SoC NMI / GPIO interrupt connected to the
+    				IRQ_AUDIO pin
+    - #clock-cells:		Shall be 0
+    - clock-output-names:	"4M_adda"
+
+    - see clock/clock-bindings.txt for common clock bindings
+
+  - rtc
+    - compatible:		"x-powers,ac100-rtc"
+    - interrupt-parent:		The parent interrupt controller
+    - interrupts:		SoC NMI / GPIO interrupt connected to the
+    				IRQ_RTC pin
+    - clocks:			A phandle to the codec's "4M_adda" clock
+    - #clock-cells:		Shall be 1
+    - clock-output-names:	"cko1_rtc", "cko2_rtc", "cko3_rtc"
+
+    - see clock/clock-bindings.txt for common clock bindings
+
+Example:
+
+ac100: codec@e89 {
+	compatible = "x-powers,ac100";
+	reg = <0xe89>;
+
+	ac100_codec: codec {
+		compatible = "x-powers,ac100-codec";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
+		#clock-cells = <0>;
+		clock-output-names = "4M_adda";
+	};
+
+	ac100_rtc: rtc {
+		compatible = "x-powers,ac100-rtc";
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&ac100_codec>;
+		#clock-cells = <1>;
+		clock-output-names = "cko1_rtc", "cko2_rtc", "cko3_rtc";
+	};
+};
--- a/Documentation/devicetree/bindings/mfd/axp20x.txt
+++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
@ -10,7 +10,8 @@ axp809 (X-Powers)

 Required properties:
 - compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209",
-	      "x-powers,axp221", "x-powers,axp223", "x-powers,axp809"
+	      "x-powers,axp221", "x-powers,axp223", "x-powers,axp806",
+	      "x-powers,axp809"
 - reg: The I2C slave address or RSB hardware address for the AXP chip
 - interrupt-parent: The parent interrupt controller
 - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
@ -47,7 +48,6 @@ Optional properties for DCDC regulators:
 			  probably makes sense for HiFi audio related
 			  applications that aren't battery constrained.

-
 AXP202/AXP209 regulators, type, and corresponding input supply names:

 Regulator	  Type		  Supply Name		  Notes
@ -86,6 +86,30 @@ LDO_IO1		: LDO		: ips-supply		: GPIO 1
 RTC_LDO		: LDO		: ips-supply		: always on
 DRIVEVBUS	: Enable output	: drivevbus-supply	: external regulator

+AXP806 regulators, type, and corresponding input supply names:
+
+Regulator	  Type		  Supply Name		  Notes
+---------	  ----		  -----------		  -----
+DCDCA		: DC-DC buck	: vina-supply		: poly-phase capable
+DCDCB		: DC-DC buck	: vinb-supply		: poly-phase capable
+DCDCC		: DC-DC	buck	: vinc-supply		: poly-phase capable
+DCDCD		: DC-DC	buck	: vind-supply		: poly-phase capable
+DCDCE		: DC-DC	buck	: vine-supply		: poly-phase capable
+ALDO1		: LDO		: aldoin-supply		: shared supply
+ALDO2		: LDO		: aldoin-supply		: shared supply
+ALDO3		: LDO		: aldoin-supply		: shared supply
+BLDO1		: LDO		: bldoin-supply		: shared supply
+BLDO2		: LDO		: bldoin-supply		: shared supply
+BLDO3		: LDO		: bldoin-supply		: shared supply
+BLDO4		: LDO		: bldoin-supply		: shared supply
+CLDO1		: LDO		: cldoin-supply		: shared supply
+CLDO2		: LDO		: cldoin-supply		: shared supply
+CLDO3		: LDO		: cldoin-supply		: shared supply
+SW		: On/Off Switch : swin-supply
+
+Additionally, the AXP806 DC-DC regulators support poly-phase arrangements
+for higher output current. The possible groupings are: A+B, A+B+C, D+E.
+
 AXP809 regulators, type, and corresponding input supply names:

 Regulator	  Type		  Supply Name		  Notes
--- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
@ -62,6 +62,7 @@ The below bindings specify the set of valid subnodes.
 		    "qcom,pm8058-rtc"
 		    "qcom,pm8921-rtc"
 		    "qcom,pm8941-rtc"
+		    "qcom,pm8018-rtc"

 - reg:
 	Usage: required
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@ -13,6 +13,7 @@ frequencies.
 		    "qcom,rpm-msm8660"
 		    "qcom,rpm-msm8960"
 		    "qcom,rpm-ipq8064"
+		    "qcom,rpm-mdm9615"

 - reg:
 	Usage: required
@ -59,6 +60,7 @@ Regulator nodes are identified by their compatible:
 		    "qcom,rpm-pm8058-regulators"
 		    "qcom,rpm-pm8901-regulators"
 		    "qcom,rpm-pm8921-regulators"
+		    "qcom,rpm-pm8018-regulators"

 - vdd_l0_l1_lvs-supply:
 - vdd_l2_l11_l12-supply:
@ -137,6 +139,15 @@ Regulator nodes are identified by their compatible:
 	Definition: reference to regulator supplying the input pin, as
 		    described in the data sheet

+- vin_lvs1-supply:
+- vdd_l7-supply:
+- vdd_l8-supply:
+- vdd_l9_l10_l11_l12-supply:
+	Usage: optional (pm8018 only)
+	Value type: <phandle>
+	Definition: reference to regulator supplying the input pin, as
+		    described in the data sheet
+
 The regulator node houses sub-nodes for each regulator within the device. Each
 sub-node is identified using the node's name, with valid values listed for each
 of the pmics below.
@ -156,6 +167,10 @@ pm8921:
 	l29, lvs1, lvs2, lvs3, lvs4, lvs5, lvs6, lvs7, usb-switch, hdmi-switch,
 	ncp

+pm8018:
+	s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+	l12, l14, lvs1
+
 The content of each sub-node is defined by the standard binding for regulators -
 see regulator.txt - with additional custom properties described below:

--- a/Documentation/devicetree/bindings/mfd/rk808.txt
+++ b/Documentation/devicetree/bindings/mfd/rk808.txt
@ -1,7 +1,11 @@
-RK808 Power Management Integrated Circuit
+RK8XX Power Management Integrated Circuit
+
+The rk8xx family current members:
+rk808
+rk818

 Required properties:
- compatible: "rockchip,rk808"
+- compatible: "rockchip,rk808", "rockchip,rk818"
 - reg: I2C slave address
 - interrupt-parent: The parent interrupt controller.
 - interrupts: the interrupt outputs of the controller.
@ -13,6 +17,8 @@ Optional properties:
  default output clock name
 - rockchip,system-power-controller: Telling whether or not this pmic is controlling
  the system power.
+
+Optional RK808 properties:
 - vcc1-supply:  The input supply for DCDC_REG1
 - vcc2-supply:  The input supply for DCDC_REG2
 - vcc3-supply:  The input supply for DCDC_REG3
@ -29,7 +35,20 @@ Optional properties:
  the gpio controller. If DVS GPIOs aren't present, voltage changes will happen
  very quickly with no slow ramp time.

-Regulators: All the regulators of RK808 to be instantiated shall be
+Optional RK818 properties:
+- vcc1-supply:  The input supply for DCDC_REG1
+- vcc2-supply:  The input supply for DCDC_REG2
+- vcc3-supply:  The input supply for DCDC_REG3
+- vcc4-supply:  The input supply for DCDC_REG4
+- boost-supply: The input supply for DCDC_BOOST
+- vcc6-supply:  The input supply for LDO_REG1 and LDO_REG2
+- vcc7-supply:  The input supply for LDO_REG3, LDO_REG5 and LDO_REG7
+- vcc8-supply:  The input supply for LDO_REG4, LDO_REG6 and LDO_REG8
+- vcc9-supply:  The input supply for LDO_REG9 and SWITCH_REG
+- h_5v-supply:  The input supply for HDMI_SWITCH
+- usb-supply:   The input supply for OTG_SWITCH
+
+Regulators: All the regulators of RK8XX to be instantiated shall be
 listed in a child node named 'regulators'. Each regulator is represented
 by a child node of the 'regulators' node.

@ -48,6 +67,18 @@ number as described in RK808 datasheet.
 	- SWITCH_REGn
 		- valid values for n are 1 to 2

+Following regulators of the RK818 PMIC block are supported. Note that
+the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
+number as described in RK818 datasheet.
+
+	- DCDC_REGn
+		- valid values for n are 1 to 4.
+	- LDO_REGn
+		- valid values for n are 1 to 9.
+	- SWITCH_REG
+	- HDMI_SWITCH
+	- OTG_SWITCH
+
 Standard regulator bindings are used inside regulator subnodes. Check
  Documentation/devicetree/bindings/regulator/regulator.txt
 for more details
--- a/1
+++ b/1
@ -1004,6 +1004,7 @@ N:	meson
 ARM/Annapurna Labs ALPINE ARCHITECTURE
 M:	Tsahee Zidenberg <tsahee@annapurnalabs.com>
 M:	Antoine Tenart <antoine.tenart@free-electrons.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-alpine/
 F:	arch/arm/boot/dts/alpine*
--- a/9
+++ b/9
@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Psychotic Stoned Sheep

 # *DOCUMENTATION*
@ -635,13 +635,6 @@ endif
 # Tell gcc to never replace conditional load with a non-conditional one
 KBUILD_CFLAGS	+= $(call cc-option,--param=allow-store-data-races=0)

-PHONY += gcc-plugins
-gcc-plugins: scripts_basic
-ifdef CONFIG_GCC_PLUGINS
-	$(Q)$(MAKE) $(build)=scripts/gcc-plugins
-endif
-	@:
-
 include scripts/Makefile.gcc-plugins

 ifdef CONFIG_READABLE_ASM
--- a/arch/Kconfig
+++ b/arch/Kconfig
@ -461,6 +461,15 @@ config CC_STACKPROTECTOR_STRONG

 endchoice

+config HAVE_ARCH_WITHIN_STACK_FRAMES
+	bool
+	help
+	  An architecture should select this if it can walk the kernel stack
+	  frames to determine if an object is part of either the arguments
+	  or local variables (i.e. that it excludes saved return addresses,
+	  and similar) by implementing an inline arch_within_stack_frames(),
+	  which is used by CONFIG_HARDENED_USERCOPY.
+
 config HAVE_CONTEXT_TRACKING
 	bool
 	help
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@ -35,6 +35,7 @@ config ARM
 	select HARDIRQS_SW_RESEND
 	select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT)
 	select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
+	select HAVE_ARCH_HARDENED_USERCOPY
 	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
 	select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
 	select HAVE_ARCH_MMAP_RND_BITS if MMU
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@ -260,12 +260,14 @@ machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
 platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y)))

 ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y)
+ifneq ($(CONFIG_ARM_SINGLE_ARMV7M),y)
 ifeq ($(KBUILD_SRC),)
 KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs))
 else
 KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
 endif
 endif
+endif

 export	TEXT_OFFSET GZFLAGS MMUEXT

--- a/arch/arm/boot/dts/arm-realview-pbx-a9.dts
+++ b/arch/arm/boot/dts/arm-realview-pbx-a9.dts
@ -70,13 +70,12 @@
 		 * associativity as these may be erroneously set
 		 * up by boot loader(s).
 		 */
-		cache-size = <1048576>; // 1MB
-		cache-sets = <4096>;
+		cache-size = <131072>; // 128KB
+		cache-sets = <512>;
 		cache-line-size = <32>;
 		arm,parity-disable;
-		arm,tag-latency = <1>;
-		arm,data-latency = <1 1>;
-		arm,dirty-latency = <1>;
+		arm,tag-latency = <1 1 1>;
+		arm,data-latency = <1 1 1>;
 	};

 	scu: scu@1f000000 {
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/integratorap.dts
@ -42,7 +42,7 @@
 	};

 	syscon {
-		compatible = "arm,integrator-ap-syscon";
+		compatible = "arm,integrator-ap-syscon", "syscon";
 		reg = <0x11000000 0x100>;
 		interrupt-parent = <&pic>;
 		/* These are the logical module IRQs */
--- a/arch/arm/boot/dts/integratorcp.dts
+++ b/arch/arm/boot/dts/integratorcp.dts
@ -94,7 +94,7 @@
 	};

 	syscon {
-		compatible = "arm,integrator-cp-syscon";
+		compatible = "arm,integrator-cp-syscon", "syscon";
 		reg = <0xcb000000 0x100>;
 	};

--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@ -70,14 +70,6 @@
 		cpu_on		= <0x84000003>;
 	};

-	psci {
-		compatible	= "arm,psci";
-		method		= "smc";
-		cpu_suspend	= <0x84000001>;
-		cpu_off		= <0x84000002>;
-		cpu_on		= <0x84000003>;
-	};
-
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@ -1382,7 +1382,7 @@
 	 *   Pin 41: BR_UART1_TXD
 	 *   Pin 44: BR_UART1_RXD
 	 */
-	serial@70006000 {
+	serial@0,70006000 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};
@ -1394,7 +1394,7 @@
 	 *   Pin 71: UART2_CTS_L
 	 *   Pin 74: UART2_RTS_L
 	 */
-	serial@70006040 {
+	serial@0,70006040 {
 		compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart";
 		status = "okay";
 	};
--- a/arch/arm/configs/aspeed_g4_defconfig
+++ b/arch/arm/configs/aspeed_g4_defconfig
@ -58,7 +58,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_FIRMWARE_MEMMAP=y
 CONFIG_FANOTIFY=y
-CONFIG_PRINTK_TIME=1
+CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_PAGE_POISONING=y
--- a/arch/arm/configs/aspeed_g5_defconfig
+++ b/arch/arm/configs/aspeed_g5_defconfig
@ -59,7 +59,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_FIRMWARE_MEMMAP=y
 CONFIG_FANOTIFY=y
-CONFIG_PRINTK_TIME=1
+CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_PAGE_POISONING=y
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@ -480,7 +480,10 @@ arm_copy_from_user(void *to, const void __user *from, unsigned long n);
 static inline unsigned long __must_check
 __copy_from_user(void *to, const void __user *from, unsigned long n)
 {
-	unsigned int __ua_flags = uaccess_save_and_enable();
+	unsigned int __ua_flags;
+
+	check_object_size(to, n, false);
+	__ua_flags = uaccess_save_and_enable();
 	n = arm_copy_from_user(to, from, n);
 	uaccess_restore(__ua_flags);
 	return n;
@ -495,11 +498,15 @@ static inline unsigned long __must_check
 __copy_to_user(void __user *to, const void *from, unsigned long n)
 {
 #ifndef CONFIG_UACCESS_WITH_MEMCPY
-	unsigned int __ua_flags = uaccess_save_and_enable();
+	unsigned int __ua_flags;
+
+	check_object_size(from, n, true);
+	__ua_flags = uaccess_save_and_enable();
 	n = arm_copy_to_user(to, from, n);
 	uaccess_restore(__ua_flags);
 	return n;
 #else
+	check_object_size(from, n, true);
 	return arm_copy_to_user(to, from, n);
 #endif
 }
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@ -279,8 +279,12 @@ asmlinkage long sys_oabi_epoll_wait(int epfd,
 	mm_segment_t fs;
 	long ret, err, i;

-	if (maxevents <= 0 || maxevents > (INT_MAX/sizeof(struct epoll_event)))
+	if (maxevents <= 0 ||
+			maxevents > (INT_MAX/sizeof(*kbuf)) ||
+			maxevents > (INT_MAX/sizeof(*events)))
 		return -EINVAL;
+	if (!access_ok(VERIFY_WRITE, events, sizeof(*events) * maxevents))
+		return -EFAULT;
 	kbuf = kmalloc(sizeof(*kbuf) * maxevents, GFP_KERNEL);
 	if (!kbuf)
 		return -ENOMEM;
@ -317,6 +321,8 @@ asmlinkage long sys_oabi_semtimedop(int semid,

 	if (nsops < 1 || nsops > SEMOPM)
 		return -EINVAL;
+	if (!access_ok(VERIFY_READ, tsops, sizeof(*tsops) * nsops))
+		return -EFAULT;
 	sops = kmalloc(sizeof(*sops) * nsops, GFP_KERNEL);
 	if (!sops)
 		return -ENOMEM;
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@ -1009,9 +1009,13 @@ long kvm_arch_vm_ioctl(struct file *filp,

 	switch (ioctl) {
 	case KVM_CREATE_IRQCHIP: {
+		int ret;
 		if (!vgic_present)
 			return -ENXIO;
-		return kvm_vgic_create(kvm, KVM_DEV_TYPE_ARM_VGIC_V2);
+		mutex_lock(&kvm->lock);
+		ret = kvm_vgic_create(kvm, KVM_DEV_TYPE_ARM_VGIC_V2);
+		mutex_unlock(&kvm->lock);
+		return ret;
 	}
 	case KVM_ARM_SET_DEVICE_ADDR: {
 		struct kvm_arm_device_addr dev_addr;
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@ -1,13 +1,13 @@
 menuconfig ARCH_CLPS711X
 	bool "Cirrus Logic EP721x/EP731x-based"
 	depends on ARCH_MULTI_V4T
-	select ARCH_REQUIRE_GPIOLIB
 	select AUTO_ZRELADDR
 	select CLKSRC_OF
 	select CLPS711X_TIMER
 	select COMMON_CLK
 	select CPU_ARM720T
 	select GENERIC_CLOCKEVENTS
+	select GPIOLIB
 	select MFD_SYSCON
 	select OF_IRQ
 	select USE_OF
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@ -1,5 +1,4 @@
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
-	-I$(srctree)/arch/arm/plat-orion/include
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include

 AFLAGS_coherency_ll.o		:= -Wa,-march=armv7-a
 CFLAGS_pmsu.o			:= -march=armv7-a
--- a/arch/arm/mach-oxnas/Kconfig
+++ b/arch/arm/mach-oxnas/Kconfig
@ -11,11 +11,13 @@ if ARCH_OXNAS

 config MACH_OX810SE
 	bool "Support OX810SE Based Products"
+	select ARCH_HAS_RESET_CONTROLLER
 	select COMMON_CLK_OXNAS
 	select CPU_ARM926T
 	select MFD_SYSCON
 	select OXNAS_RPS_TIMER
 	select PINCTRL_OXNAS
+	select RESET_CONTROLLER
 	select RESET_OXNAS
 	select VERSATILE_FPGA_IRQ
 	help
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@ -13,6 +13,7 @@
 */

 #include <linux/kernel.h>
+#include <linux/module.h>	/* symbol_get ; symbol_put */
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/major.h>
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@ -13,6 +13,7 @@
 */

 #include <linux/kernel.h>
+#include <linux/module.h>	/* symbol_get ; symbol_put */
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/gpio_keys.h>
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@ -1,8 +1,7 @@
 #
 # Makefile for the linux kernel.
 #
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
-	-I$(srctree)/arch/arm/plat-versatile/include
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-versatile/include

 obj-y					:= core.o
 obj-$(CONFIG_REALVIEW_DT)		+= realview-dt.o
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@ -5,7 +5,7 @@
 #
 # Licensed under GPLv2

-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/arch/arm/plat-samsung/include

 # Core

--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@ -40,5 +40,8 @@ bool shmobile_smp_cpu_can_disable(unsigned int cpu)
 bool __init shmobile_smp_init_fallback_ops(void)
 {
 	/* fallback on PSCI/smp_ops if no other DT based method is detected */
+	if (!IS_ENABLED(CONFIG_SMP))
+		return false;
+
 	return platform_can_secondary_boot() ? true : false;
 }
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@ -54,6 +54,7 @@ config ARM64
 	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_BITREVERSE
+	select HAVE_ARCH_HARDENED_USERCOPY
 	select HAVE_ARCH_HUGE_VMAP
 	select HAVE_ARCH_JUMP_LABEL
 	select HAVE_ARCH_KASAN if SPARSEMEM_VMEMMAP && !(ARM64_16K_PAGES && ARM64_VA_BITS_48)
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@ -8,7 +8,7 @@ config ARCH_SUNXI

 config ARCH_ALPINE
 	bool "Annapurna Labs Alpine platform"
-	select ALPINE_MSI
+	select ALPINE_MSI if PCI
 	help
 	  This enables support for the Annapurna Labs Alpine
 	  Soc family.
@ -66,7 +66,7 @@ config ARCH_LG1K
 config ARCH_HISI
 	bool "Hisilicon SoC Family"
 	select ARM_TIMER_SP804
-	select HISILICON_IRQ_MBIGEN
+	select HISILICON_IRQ_MBIGEN if PCI
 	help
 	  This enables support for Hisilicon ARMv8 SoC family

--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@ -12,6 +12,7 @@
 /dts-v1/;
 #include "exynos7.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>

 / {
 	model = "Samsung Exynos7 Espresso board based on EXYNOS7";
@ -43,6 +44,8 @@

 &rtc {
 	status = "okay";
+	clocks = <&clock_ccore PCLK_RTC>, <&s2mps15_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
 };

 &watchdog {
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@ -1,4 +1,3 @@
-# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_AUDIT=y
@ -15,10 +14,14 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MEMCG=y
 CONFIG_MEMCG_SWAP=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CGROUP_PIDS=y
 CONFIG_CGROUP_HUGETLB=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_NET_NS is not set
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_PERF=y
+CONFIG_USER_NS=y
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
@ -71,6 +74,7 @@ CONFIG_PREEMPT=y
 CONFIG_KSM=y
 CONFIG_TRANSPARENT_HUGEPAGE=y
 CONFIG_CMA=y
+CONFIG_SECCOMP=y
 CONFIG_XEN=y
 CONFIG_KEXEC=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
@ -84,10 +88,37 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=m
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_NAT=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_VLAN_8021Q_MVRP=y
 CONFIG_BPF_JIT=y
 CONFIG_CFG80211=m
 CONFIG_MAC80211=m
@ -103,6 +134,7 @@ CONFIG_MTD=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=m
 CONFIG_VIRTIO_BLK=y
 CONFIG_SRAM=y
 # CONFIG_SCSI_PROC_FS is not set
@ -120,7 +152,10 @@ CONFIG_SATA_SIL24=y
 CONFIG_PATA_PLATFORM=y
 CONFIG_PATA_OF_PLATFORM=y
 CONFIG_NETDEVICES=y
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
 CONFIG_TUN=y
+CONFIG_VETH=m
 CONFIG_VIRTIO_NET=y
 CONFIG_AMD_XGBE=y
 CONFIG_NET_XGENE=y
@ -350,12 +385,16 @@ CONFIG_EXYNOS_ADC=y
 CONFIG_PWM_SAMSUNG=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
 CONFIG_FANOTIFY=y
 CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
 CONFIG_QUOTA=y
 CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=y
-CONFIG_CUSE=y
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_OVERLAY_FS=m
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
--- a/arch/arm64/include/asm/kprobes.h
+++ b/arch/arm64/include/asm/kprobes.h
@ -22,7 +22,6 @@

 #define __ARCH_WANT_KPROBES_INSN_SLOT
 #define MAX_INSN_SIZE			1
-#define MAX_STACK_SIZE			128

 #define flush_insn_slot(p)		do { } while (0)
 #define kretprobe_blacklist_size	0
@ -47,7 +46,6 @@ struct kprobe_ctlblk {
 	struct prev_kprobe prev_kprobe;
 	struct kprobe_step_ctx ss_ctx;
 	struct pt_regs jprobe_saved_regs;
-	char jprobes_stack[MAX_STACK_SIZE];
 };

 void arch_remove_kprobe(struct kprobe *);
--- a/arch/arm64/include/asm/uaccess.h
+++ b/arch/arm64/include/asm/uaccess.h
@ -265,22 +265,25 @@ extern unsigned long __must_check __clear_user(void __user *addr, unsigned long
 static inline unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n)
 {
 	kasan_check_write(to, n);
-	return  __arch_copy_from_user(to, from, n);
+	check_object_size(to, n, false);
+	return __arch_copy_from_user(to, from, n);
 }

 static inline unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n)
 {
 	kasan_check_read(from, n);
-	return  __arch_copy_to_user(to, from, n);
+	check_object_size(from, n, true);
+	return __arch_copy_to_user(to, from, n);
 }

 static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n)
 {
 	kasan_check_write(to, n);

-	if (access_ok(VERIFY_READ, from, n))
+	if (access_ok(VERIFY_READ, from, n)) {
+		check_object_size(to, n, false);
 		n = __arch_copy_from_user(to, from, n);
-	else /* security hole - plug it */
+	} else /* security hole - plug it */
 		memset(to, 0, n);
 	return n;
 }
@ -289,8 +292,10 @@ static inline unsigned long __must_check copy_to_user(void __user *to, const voi
 {
 	kasan_check_read(from, n);

-	if (access_ok(VERIFY_WRITE, to, n))
+	if (access_ok(VERIFY_WRITE, to, n)) {
+		check_object_size(from, n, true);
 		n = __arch_copy_to_user(to, from, n);
+	}
 	return n;
 }

--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@ -353,6 +353,8 @@ el1_sync:
 	lsr	x24, x1, #ESR_ELx_EC_SHIFT	// exception class
 	cmp	x24, #ESR_ELx_EC_DABT_CUR	// data abort in EL1
 	b.eq	el1_da
+	cmp	x24, #ESR_ELx_EC_IABT_CUR	// instruction abort in EL1
+	b.eq	el1_ia
 	cmp	x24, #ESR_ELx_EC_SYS64		// configurable trap
 	b.eq	el1_undef
 	cmp	x24, #ESR_ELx_EC_SP_ALIGN	// stack alignment exception
@ -364,6 +366,11 @@ el1_sync:
 	cmp	x24, #ESR_ELx_EC_BREAKPT_CUR	// debug exception in EL1
 	b.ge	el1_dbg
 	b	el1_inv
+
+el1_ia:
+	/*
+	 * Fall through to the Data abort case
+	 */
 el1_da:
 	/*
 	 * Data abort handling
--- a/arch/arm64/kernel/hibernate.c
+++ b/arch/arm64/kernel/hibernate.c
@ -35,6 +35,7 @@
 #include <asm/sections.h>
 #include <asm/smp.h>
 #include <asm/suspend.h>
+#include <asm/sysreg.h>
 #include <asm/virt.h>

 /*
@ -217,12 +218,22 @@ static int create_safe_exec_page(void *src_start, size_t length,
 	set_pte(pte, __pte(virt_to_phys((void *)dst) |
 			 pgprot_val(PAGE_KERNEL_EXEC)));

-	/* Load our new page tables */
-	asm volatile("msr	ttbr0_el1, %0;"
-		     "isb;"
-		     "tlbi	vmalle1is;"
-		     "dsb	ish;"
-		     "isb" : : "r"(virt_to_phys(pgd)));
+	/*
+	 * Load our new page tables. A strict BBM approach requires that we
+	 * ensure that TLBs are free of any entries that may overlap with the
+	 * global mappings we are about to install.
+	 *
+	 * For a real hibernate/resume cycle TTBR0 currently points to a zero
+	 * page, but TLBs may contain stale ASID-tagged entries (e.g. for EFI
+	 * runtime services), while for a userspace-driven test_resume cycle it
+	 * points to userspace page tables (and we must point it at a zero page
+	 * ourselves). Elsewhere we only (un)install the idmap with preemption
+	 * disabled, so T0SZ should be as required regardless.
+	 */
+	cpu_set_reserved_ttbr0();
+	local_flush_tlb_all();
+	write_sysreg(virt_to_phys(pgd), ttbr0_el1);
+	isb();

 	*phys_dst_addr = virt_to_phys((void *)dst);

@ -393,6 +404,38 @@ int swsusp_arch_resume(void)
 	void __noreturn (*hibernate_exit)(phys_addr_t, phys_addr_t, void *,
 					  void *, phys_addr_t, phys_addr_t);

+	/*
+	 * Restoring the memory image will overwrite the ttbr1 page tables.
+	 * Create a second copy of just the linear map, and use this when
+	 * restoring.
+	 */
+	tmp_pg_dir = (pgd_t *)get_safe_page(GFP_ATOMIC);
+	if (!tmp_pg_dir) {
+		pr_err("Failed to allocate memory for temporary page tables.");
+		rc = -ENOMEM;
+		goto out;
+	}
+	rc = copy_page_tables(tmp_pg_dir, PAGE_OFFSET, 0);
+	if (rc)
+		goto out;
+
+	/*
+	 * Since we only copied the linear map, we need to find restore_pblist's
+	 * linear map address.
+	 */
+	lm_restore_pblist = LMADDR(restore_pblist);
+
+	/*
+	 * We need a zero page that is zero before & after resume in order to
+	 * to break before make on the ttbr1 page tables.
+	 */
+	zero_page = (void *)get_safe_page(GFP_ATOMIC);
+	if (!zero_page) {
+		pr_err("Failed to allocate zero page.");
+		rc = -ENOMEM;
+		goto out;
+	}
+
 	/*
 	 * Locate the exit code in the bottom-but-one page, so that *NULL
 	 * still has disastrous affects.
@ -418,27 +461,6 @@ int swsusp_arch_resume(void)
 	 */
 	__flush_dcache_area(hibernate_exit, exit_size);

-	/*
-	 * Restoring the memory image will overwrite the ttbr1 page tables.
-	 * Create a second copy of just the linear map, and use this when
-	 * restoring.
-	 */
-	tmp_pg_dir = (pgd_t *)get_safe_page(GFP_ATOMIC);
-	if (!tmp_pg_dir) {
-		pr_err("Failed to allocate memory for temporary page tables.");
-		rc = -ENOMEM;
-		goto out;
-	}
-	rc = copy_page_tables(tmp_pg_dir, PAGE_OFFSET, 0);
-	if (rc)
-		goto out;
-
-	/*
-	 * Since we only copied the linear map, we need to find restore_pblist's
-	 * linear map address.
-	 */
-	lm_restore_pblist = LMADDR(restore_pblist);
-
 	/*
 	 * KASLR will cause the el2 vectors to be in a different location in
 	 * the resumed kernel. Load hibernate's temporary copy into el2.
@ -453,12 +475,6 @@ int swsusp_arch_resume(void)
 		__hyp_set_vectors(el2_vectors);
 	}

-	/*
-	 * We need a zero page that is zero before & after resume in order to
-	 * to break before make on the ttbr1 page tables.
-	 */
-	zero_page = (void *)get_safe_page(GFP_ATOMIC);
-
 	hibernate_exit(virt_to_phys(tmp_pg_dir), resume_hdr.ttbr1_el1,
 		       resume_hdr.reenter_kernel, lm_restore_pblist,
 		       resume_hdr.__hyp_stub_vectors, virt_to_phys(zero_page));
--- a/arch/arm64/kernel/probes/kprobes.c
+++ b/arch/arm64/kernel/probes/kprobes.c
@ -41,18 +41,6 @@ DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
 static void __kprobes
 post_kprobe_handler(struct kprobe_ctlblk *, struct pt_regs *);

-static inline unsigned long min_stack_size(unsigned long addr)
-{
-	unsigned long size;
-
-	if (on_irq_stack(addr, raw_smp_processor_id()))
-		size = IRQ_STACK_PTR(raw_smp_processor_id()) - addr;
-	else
-		size = (unsigned long)current_thread_info() + THREAD_START_SP - addr;
-
-	return min(size, FIELD_SIZEOF(struct kprobe_ctlblk, jprobes_stack));
-}
-
 static void __kprobes arch_prepare_ss_slot(struct kprobe *p)
 {
 	/* prepare insn slot */
@ -489,20 +477,15 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
 {
 	struct jprobe *jp = container_of(p, struct jprobe, kp);
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-	long stack_ptr = kernel_stack_pointer(regs);

 	kcb->jprobe_saved_regs = *regs;
 	/*
-	 * As Linus pointed out, gcc assumes that the callee
-	 * owns the argument space and could overwrite it, e.g.
-	 * tailcall optimization. So, to be absolutely safe
-	 * we also save and restore enough stack bytes to cover
-	 * the argument area.
+	 * Since we can't be sure where in the stack frame "stacked"
+	 * pass-by-value arguments are stored we just don't try to
+	 * duplicate any of the stack. Do not use jprobes on functions that
+	 * use more than 64 bytes (after padding each to an 8 byte boundary)
+	 * of arguments, or pass individual arguments larger than 16 bytes.
 	 */
-	kasan_disable_current();
-	memcpy(kcb->jprobes_stack, (void *)stack_ptr,
-	       min_stack_size(stack_ptr));
-	kasan_enable_current();

 	instruction_pointer_set(regs, (unsigned long) jp->entry);
 	preempt_disable();
@ -554,10 +537,6 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 	}
 	unpause_graph_tracing();
 	*regs = kcb->jprobe_saved_regs;
-	kasan_disable_current();
-	memcpy((void *)stack_addr, kcb->jprobes_stack,
-	       min_stack_size(stack_addr));
-	kasan_enable_current();
 	preempt_enable_no_resched();
 	return 1;
 }
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@ -661,9 +661,9 @@ void __init smp_init_cpus(void)
 		acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT,
 				      acpi_parse_gic_cpu_interface, 0);

-	if (cpu_count > NR_CPUS)
-		pr_warn("no. of cores (%d) greater than configured maximum of %d - clipping\n",
-			cpu_count, NR_CPUS);
+	if (cpu_count > nr_cpu_ids)
+		pr_warn("Number of cores (%d) exceeds configured maximum of %d - clipping\n",
+			cpu_count, nr_cpu_ids);

 	if (!bootcpu_valid) {
 		pr_err("missing boot CPU MPIDR, not enabling secondaries\n");
@ -677,7 +677,7 @@ void __init smp_init_cpus(void)
 	 * with entries in cpu_logical_map while initializing the cpus.
 	 * If the cpu set-up fails, invalidate the cpu_logical_map entry.
 	 */
-	for (i = 1; i < NR_CPUS; i++) {
+	for (i = 1; i < nr_cpu_ids; i++) {
 		if (cpu_logical_map(i) != INVALID_HWID) {
 			if (smp_cpu_setup(i))
 				cpu_logical_map(i) = INVALID_HWID;
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@ -153,6 +153,11 @@ int ptep_set_access_flags(struct vm_area_struct *vma,
 }
 #endif

+static bool is_el1_instruction_abort(unsigned int esr)
+{
+	return ESR_ELx_EC(esr) == ESR_ELx_EC_IABT_CUR;
+}
+
 /*
 * The kernel tried to access some page that wasn't present.
 */
@ -161,8 +166,9 @@ static void __do_kernel_fault(struct mm_struct *mm, unsigned long addr,
 {
 	/*
 	 * Are we prepared to handle this kernel fault?
+	 * We are almost certainly not prepared to handle instruction faults.
 	 */
-	if (fixup_exception(regs))
+	if (!is_el1_instruction_abort(esr) && fixup_exception(regs))
 		return;

 	/*
@ -267,7 +273,8 @@ static inline bool is_permission_fault(unsigned int esr)
 	unsigned int ec       = ESR_ELx_EC(esr);
 	unsigned int fsc_type = esr & ESR_ELx_FSC_TYPE;

-	return (ec == ESR_ELx_EC_DABT_CUR && fsc_type == ESR_ELx_FSC_PERM);
+	return (ec == ESR_ELx_EC_DABT_CUR && fsc_type == ESR_ELx_FSC_PERM) ||
+	       (ec == ESR_ELx_EC_IABT_CUR && fsc_type == ESR_ELx_FSC_PERM);
 }

 static bool is_el0_instruction_abort(unsigned int esr)
@ -312,6 +319,9 @@ static int __kprobes do_page_fault(unsigned long addr, unsigned int esr,
 		if (regs->orig_addr_limit == KERNEL_DS)
 			die("Accessing user space memory with fs=KERNEL_DS", regs, esr);

+		if (is_el1_instruction_abort(esr))
+			die("Attempting to execute userspace memory", regs, esr);
+
 		if (!search_exception_tables(regs->pc))
 			die("Accessing user space memory outside uaccess.h routines", regs, esr);
 	}
--- a/arch/h8300/include/asm/io.h
+++ b/arch/h8300/include/asm/io.h
@ -3,6 +3,8 @@

 #ifdef __KERNEL__

+#include <linux/types.h>
+
 /* H8/300 internal I/O functions */

 #define __raw_readb __raw_readb
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@ -52,6 +52,7 @@ config IA64
 	select MODULES_USE_ELF_RELA
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select HAVE_ARCH_AUDITSYSCALL
+	select HAVE_ARCH_HARDENED_USERCOPY
 	default y
 	help
 	  The Itanium Processor Family is Intel's 64-bit successor to
--- a/arch/ia64/include/asm/uaccess.h
+++ b/arch/ia64/include/asm/uaccess.h
@ -241,12 +241,18 @@ extern unsigned long __must_check __copy_user (void __user *to, const void __use
 static inline unsigned long
 __copy_to_user (void __user *to, const void *from, unsigned long count)
 {
+	if (!__builtin_constant_p(count))
+		check_object_size(from, count, true);
+
 	return __copy_user(to, (__force void __user *) from, count);
 }

 static inline unsigned long
 __copy_from_user (void *to, const void __user *from, unsigned long count)
 {
+	if (!__builtin_constant_p(count))
+		check_object_size(to, count, false);
+
 	return __copy_user((__force void __user *) to, from, count);
 }

@ -258,8 +264,11 @@ __copy_from_user (void *to, const void __user *from, unsigned long count)
 	const void *__cu_from = (from);							\
 	long __cu_len = (n);								\
 											\
-	if (__access_ok(__cu_to, __cu_len, get_fs()))					\
-		__cu_len = __copy_user(__cu_to, (__force void __user *) __cu_from, __cu_len);	\
+	if (__access_ok(__cu_to, __cu_len, get_fs())) {					\
+		if (!__builtin_constant_p(n))						\
+			check_object_size(__cu_from, __cu_len, true);			\
+		__cu_len = __copy_user(__cu_to, (__force void __user *)  __cu_from, __cu_len);	\
+	}										\
 	__cu_len;									\
 })

@ -270,8 +279,11 @@ __copy_from_user (void *to, const void __user *from, unsigned long count)
 	long __cu_len = (n);								\
 											\
 	__chk_user_ptr(__cu_from);							\
-	if (__access_ok(__cu_from, __cu_len, get_fs()))					\
+	if (__access_ok(__cu_from, __cu_len, get_fs())) {				\
+		if (!__builtin_constant_p(n))						\
+			check_object_size(__cu_to, __cu_len, false);			\
 		__cu_len = __copy_user((__force void __user *) __cu_to, __cu_from, __cu_len);	\
+	}										\
 	__cu_len;									\
 })

--- a/arch/m68k/kernel/signal.c
+++ b/arch/m68k/kernel/signal.c
@ -213,7 +213,6 @@ static inline int frame_extra_sizes(int f)

 static inline void adjustformat(struct pt_regs *regs)
 {
-	((struct switch_stack *)regs - 1)->a5 = current->mm->start_data;
 	/*
 	 * set format byte to make stack appear modulo 4, which it will
 	 * be when doing the rte
--- a/arch/metag/mm/init.c
+++ b/arch/metag/mm/init.c
@ -390,7 +390,6 @@ void __init mem_init(void)

 	free_all_bootmem();
 	mem_init_print_info(NULL);
-	show_mem(0);
 }

 void free_initmem(void)
--- a/arch/mips/kvm/emulate.c
+++ b/arch/mips/kvm/emulate.c
@ -1642,8 +1642,14 @@ enum emulation_result kvm_mips_emulate_cache(union mips_instruction inst,

 	preempt_disable();
 	if (KVM_GUEST_KSEGX(va) == KVM_GUEST_KSEG0) {
-		if (kvm_mips_host_tlb_lookup(vcpu, va) < 0)
-			kvm_mips_handle_kseg0_tlb_fault(va, vcpu);
+		if (kvm_mips_host_tlb_lookup(vcpu, va) < 0 &&
+		    kvm_mips_handle_kseg0_tlb_fault(va, vcpu)) {
+			kvm_err("%s: handling mapped kseg0 tlb fault for %lx, vcpu: %p, ASID: %#lx\n",
+				__func__, va, vcpu, read_c0_entryhi());
+			er = EMULATE_FAIL;
+			preempt_enable();
+			goto done;
+		}
 	} else if ((KVM_GUEST_KSEGX(va) < KVM_GUEST_KSEG0) ||
 		   KVM_GUEST_KSEGX(va) == KVM_GUEST_KSEG23) {
 		int index;
@ -1680,12 +1686,18 @@ enum emulation_result kvm_mips_emulate_cache(union mips_instruction inst,
 								run, vcpu);
 				preempt_enable();
 				goto dont_update_pc;
-			} else {
-				/*
-				 * We fault an entry from the guest tlb to the
-				 * shadow host TLB
-				 */
-				kvm_mips_handle_mapped_seg_tlb_fault(vcpu, tlb);
+			}
+			/*
+			 * We fault an entry from the guest tlb to the
+			 * shadow host TLB
+			 */
+			if (kvm_mips_handle_mapped_seg_tlb_fault(vcpu, tlb)) {
+				kvm_err("%s: handling mapped seg tlb fault for %lx, index: %u, vcpu: %p, ASID: %#lx\n",
+					__func__, va, index, vcpu,
+					read_c0_entryhi());
+				er = EMULATE_FAIL;
+				preempt_enable();
+				goto done;
 			}
 		}
 	} else {
@ -2659,7 +2671,12 @@ enum emulation_result kvm_mips_handle_tlbmiss(u32 cause,
 			 * OK we have a Guest TLB entry, now inject it into the
 			 * shadow host TLB
 			 */
-			kvm_mips_handle_mapped_seg_tlb_fault(vcpu, tlb);
+			if (kvm_mips_handle_mapped_seg_tlb_fault(vcpu, tlb)) {
+				kvm_err("%s: handling mapped seg tlb fault for %lx, index: %u, vcpu: %p, ASID: %#lx\n",
+					__func__, va, index, vcpu,
+					read_c0_entryhi());
+				er = EMULATE_FAIL;
+			}
 		}
 	}

--- a/arch/mips/kvm/mmu.c
+++ b/arch/mips/kvm/mmu.c
@ -99,7 +99,7 @@ int kvm_mips_handle_kseg0_tlb_fault(unsigned long badvaddr,
 	}

 	gfn = (KVM_GUEST_CPHYSADDR(badvaddr) >> PAGE_SHIFT);
-	if (gfn >= kvm->arch.guest_pmap_npages) {
+	if ((gfn | 1) >= kvm->arch.guest_pmap_npages) {
 		kvm_err("%s: Invalid gfn: %#llx, BadVaddr: %#lx\n", __func__,
 			gfn, badvaddr);
 		kvm_mips_dump_host_tlbs();
@ -138,35 +138,49 @@ int kvm_mips_handle_mapped_seg_tlb_fault(struct kvm_vcpu *vcpu,
 	unsigned long entryhi = 0, entrylo0 = 0, entrylo1 = 0;
 	struct kvm *kvm = vcpu->kvm;
 	kvm_pfn_t pfn0, pfn1;
+	gfn_t gfn0, gfn1;
+	long tlb_lo[2];
 	int ret;

-	if ((tlb->tlb_hi & VPN2_MASK) == 0) {
-		pfn0 = 0;
-		pfn1 = 0;
-	} else {
-		if (kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo[0])
-					   >> PAGE_SHIFT) < 0)
-			return -1;
+	tlb_lo[0] = tlb->tlb_lo[0];
+	tlb_lo[1] = tlb->tlb_lo[1];

-		if (kvm_mips_map_page(kvm, mips3_tlbpfn_to_paddr(tlb->tlb_lo[1])
-					   >> PAGE_SHIFT) < 0)
-			return -1;
+	/*
+	 * The commpage address must not be mapped to anything else if the guest
+	 * TLB contains entries nearby, or commpage accesses will break.
+	 */
+	if (!((tlb->tlb_hi ^ KVM_GUEST_COMMPAGE_ADDR) &
+			VPN2_MASK & (PAGE_MASK << 1)))
+		tlb_lo[(KVM_GUEST_COMMPAGE_ADDR >> PAGE_SHIFT) & 1] = 0;

-		pfn0 = kvm->arch.guest_pmap[
-			mips3_tlbpfn_to_paddr(tlb->tlb_lo[0]) >> PAGE_SHIFT];
-		pfn1 = kvm->arch.guest_pmap[
-			mips3_tlbpfn_to_paddr(tlb->tlb_lo[1]) >> PAGE_SHIFT];
+	gfn0 = mips3_tlbpfn_to_paddr(tlb_lo[0]) >> PAGE_SHIFT;
+	gfn1 = mips3_tlbpfn_to_paddr(tlb_lo[1]) >> PAGE_SHIFT;
+	if (gfn0 >= kvm->arch.guest_pmap_npages ||
+	    gfn1 >= kvm->arch.guest_pmap_npages) {
+		kvm_err("%s: Invalid gfn: [%#llx, %#llx], EHi: %#lx\n",
+			__func__, gfn0, gfn1, tlb->tlb_hi);
+		kvm_mips_dump_guest_tlbs(vcpu);
+		return -1;
 	}

+	if (kvm_mips_map_page(kvm, gfn0) < 0)
+		return -1;
+
+	if (kvm_mips_map_page(kvm, gfn1) < 0)
+		return -1;
+
+	pfn0 = kvm->arch.guest_pmap[gfn0];
+	pfn1 = kvm->arch.guest_pmap[gfn1];
+
 	/* Get attributes from the Guest TLB */
 	entrylo0 = mips3_paddr_to_tlbpfn(pfn0 << PAGE_SHIFT) |
 		((_page_cachable_default >> _CACHE_SHIFT) << ENTRYLO_C_SHIFT) |
-		(tlb->tlb_lo[0] & ENTRYLO_D) |
-		(tlb->tlb_lo[0] & ENTRYLO_V);
+		(tlb_lo[0] & ENTRYLO_D) |
+		(tlb_lo[0] & ENTRYLO_V);
 	entrylo1 = mips3_paddr_to_tlbpfn(pfn1 << PAGE_SHIFT) |
 		((_page_cachable_default >> _CACHE_SHIFT) << ENTRYLO_C_SHIFT) |
-		(tlb->tlb_lo[1] & ENTRYLO_D) |
-		(tlb->tlb_lo[1] & ENTRYLO_V);
+		(tlb_lo[1] & ENTRYLO_D) |
+		(tlb_lo[1] & ENTRYLO_V);

 	kvm_debug("@ %#lx tlb_lo0: 0x%08lx tlb_lo1: 0x%08lx\n", vcpu->arch.pc,
 		  tlb->tlb_lo[0], tlb->tlb_lo[1]);
@ -354,9 +368,15 @@ u32 kvm_get_inst(u32 *opc, struct kvm_vcpu *vcpu)
 				local_irq_restore(flags);
 				return KVM_INVALID_INST;
 			}
-			kvm_mips_handle_mapped_seg_tlb_fault(vcpu,
-							     &vcpu->arch.
-							     guest_tlb[index]);
+			if (kvm_mips_handle_mapped_seg_tlb_fault(vcpu,
+						&vcpu->arch.guest_tlb[index])) {
+				kvm_err("%s: handling mapped seg tlb fault failed for %p, index: %u, vcpu: %p, ASID: %#lx\n",
+					__func__, opc, index, vcpu,
+					read_c0_entryhi());
+				kvm_mips_dump_guest_tlbs(vcpu);
+				local_irq_restore(flags);
+				return KVM_INVALID_INST;
+			}
 			inst = *(opc);
 		}
 		local_irq_restore(flags);
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@ -166,6 +166,7 @@ config PPC
 	select HAVE_LIVEPATCH if HAVE_DYNAMIC_FTRACE_WITH_REGS
 	select GENERIC_CPU_AUTOPROBE
 	select HAVE_VIRT_CPU_ACCOUNTING
+	select HAVE_ARCH_HARDENED_USERCOPY

 config GENERIC_CSUM
 	def_bool CPU_LITTLE_ENDIAN
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@ -66,29 +66,28 @@ endif
 UTS_MACHINE := $(OLDARCH)

 ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
-override CC	+= -mlittle-endian
-ifneq ($(cc-name),clang)
-override CC	+= -mno-strict-align
-endif
-override AS	+= -mlittle-endian
 override LD	+= -EL
-override CROSS32CC += -mlittle-endian
 override CROSS32AS += -mlittle-endian
 LDEMULATION	:= lppc
 GNUTARGET	:= powerpcle
 MULTIPLEWORD	:= -mno-multiple
 KBUILD_CFLAGS_MODULE += $(call cc-option,-mno-save-toc-indirect)
 else
-ifeq ($(call cc-option-yn,-mbig-endian),y)
-override CC	+= -mbig-endian
-override AS	+= -mbig-endian
-endif
 override LD	+= -EB
 LDEMULATION	:= ppc
 GNUTARGET	:= powerpc
 MULTIPLEWORD	:= -mmultiple
 endif

+cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= $(call cc-option,-mbig-endian)
+cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -mlittle-endian
+ifneq ($(cc-name),clang)
+  cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -mno-strict-align
+endif
+
+aflags-$(CONFIG_CPU_BIG_ENDIAN)		+= $(call cc-option,-mbig-endian)
+aflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -mlittle-endian
+
 ifeq ($(HAS_BIARCH),y)
 override AS	+= -a$(CONFIG_WORD_SIZE)
 override LD	+= -m elf$(CONFIG_WORD_SIZE)$(LDEMULATION)
@ -232,6 +231,9 @@ cpu-as-$(CONFIG_E200)		+= -Wa,-me200
 KBUILD_AFLAGS += $(cpu-as-y)
 KBUILD_CFLAGS += $(cpu-as-y)

+KBUILD_AFLAGS += $(aflags-y)
+KBUILD_CFLAGS += $(cflags-y)
+
 head-y				:= arch/powerpc/kernel/head_$(CONFIG_WORD_SIZE).o
 head-$(CONFIG_8xx)		:= arch/powerpc/kernel/head_8xx.o
 head-$(CONFIG_40x)		:= arch/powerpc/kernel/head_40x.o
--- a/arch/powerpc/crypto/crc32c-vpmsum_glue.c
+++ b/arch/powerpc/crypto/crc32c-vpmsum_glue.c
@ -4,6 +4,7 @@
 #include <linux/module.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <linux/cpufeature.h>
 #include <asm/switch_to.h>

 #define CHKSUM_BLOCK_SIZE	1
@ -157,7 +158,7 @@ static void __exit crc32c_vpmsum_mod_fini(void)
 	crypto_unregister_shash(&alg);
 }

-module_init(crc32c_vpmsum_mod_init);
+module_cpu_feature_match(PPC_MODULE_FEATURE_VEC_CRYPTO, crc32c_vpmsum_mod_init);
 module_exit(crc32c_vpmsum_mod_fini);

 MODULE_AUTHOR("Anton Blanchard <anton@samba.org>");
--- a/arch/powerpc/include/asm/cpuidle.h
+++ b/arch/powerpc/include/asm/cpuidle.h
@ -19,4 +19,17 @@ extern u64 pnv_first_deep_stop_state;

 #endif

+/* Idle state entry routines */
+#ifdef	CONFIG_PPC_P7_NAP
+#define	IDLE_STATE_ENTER_SEQ(IDLE_INST)				\
+	/* Magic NAP/SLEEP/WINKLE mode enter sequence */	\
+	std	r0,0(r1);					\
+	ptesync;						\
+	ld	r0,0(r1);					\
+1:	cmp	cr0,r0,r0;					\
+	bne	1b;						\
+	IDLE_INST;						\
+	b	.
+#endif /* CONFIG_PPC_P7_NAP */
+
 #endif
--- a/arch/powerpc/include/asm/feature-fixups.h
+++ b/arch/powerpc/include/asm/feature-fixups.h
@ -186,6 +186,7 @@ label##3:					       	\

 #ifndef __ASSEMBLY__
 void apply_feature_fixups(void);
+void setup_feature_keys(void);
 #endif

 #endif /* __ASM_POWERPC_FEATURE_FIXUPS_H */
--- a/arch/powerpc/include/asm/switch_to.h
+++ b/arch/powerpc/include/asm/switch_to.h
@ -75,14 +75,6 @@ static inline void disable_kernel_spe(void)
 static inline void __giveup_spe(struct task_struct *t) { }
 #endif

-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-extern void flush_tmregs_to_thread(struct task_struct *);
-#else
-static inline void flush_tmregs_to_thread(struct task_struct *t)
-{
-}
-#endif
-
 static inline void clear_task_ebb(struct task_struct *t)
 {
 #ifdef CONFIG_PPC_BOOK3S_64
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@ -310,10 +310,15 @@ static inline unsigned long copy_from_user(void *to,
 {
 	unsigned long over;

-	if (access_ok(VERIFY_READ, from, n))
+	if (access_ok(VERIFY_READ, from, n)) {
+		if (!__builtin_constant_p(n))
+			check_object_size(to, n, false);
 		return __copy_tofrom_user((__force void __user *)to, from, n);
+	}
 	if ((unsigned long)from < TASK_SIZE) {
 		over = (unsigned long)from + n - TASK_SIZE;
+		if (!__builtin_constant_p(n - over))
+			check_object_size(to, n - over, false);
 		return __copy_tofrom_user((__force void __user *)to, from,
 				n - over) + over;
 	}
@ -325,10 +330,15 @@ static inline unsigned long copy_to_user(void __user *to,
 {
 	unsigned long over;

-	if (access_ok(VERIFY_WRITE, to, n))
+	if (access_ok(VERIFY_WRITE, to, n)) {
+		if (!__builtin_constant_p(n))
+			check_object_size(from, n, true);
 		return __copy_tofrom_user(to, (__force void __user *)from, n);
+	}
 	if ((unsigned long)to < TASK_SIZE) {
 		over = (unsigned long)to + n - TASK_SIZE;
+		if (!__builtin_constant_p(n))
+			check_object_size(from, n - over, true);
 		return __copy_tofrom_user(to, (__force void __user *)from,
 				n - over) + over;
 	}
@ -372,6 +382,10 @@ static inline unsigned long __copy_from_user_inatomic(void *to,
 		if (ret == 0)
 			return 0;
 	}
+
+	if (!__builtin_constant_p(n))
+		check_object_size(to, n, false);
+
 	return __copy_tofrom_user((__force void __user *)to, from, n);
 }

@ -398,6 +412,9 @@ static inline unsigned long __copy_to_user_inatomic(void __user *to,
 		if (ret == 0)
 			return 0;
 	}
+	if (!__builtin_constant_p(n))
+		check_object_size(from, n, true);
+
 	return __copy_tofrom_user(to, (__force const void __user *)from, n);
 }

--- a/arch/powerpc/include/asm/xics.h
+++ b/arch/powerpc/include/asm/xics.h
@ -159,6 +159,8 @@ extern void xics_teardown_cpu(void);
 extern void xics_kexec_teardown_cpu(int secondary);
 extern void xics_migrate_irqs_away(void);
 extern void icp_native_eoi(struct irq_data *d);
+extern int xics_set_irq_type(struct irq_data *d, unsigned int flow_type);
+extern int xics_retrigger(struct irq_data *data);
 #ifdef CONFIG_SMP
 extern int xics_get_irq_server(unsigned int virq, const struct cpumask *cpumask,
 			       unsigned int strict_check);
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@ -168,10 +168,10 @@ static size_t eeh_dump_dev_log(struct eeh_dev *edev, char *buf, size_t len)
 	int n = 0, l = 0;
 	char buffer[128];

-	n += scnprintf(buf+n, len-n, "%04x:%02x:%02x:%01x\n",
+	n += scnprintf(buf+n, len-n, "%04x:%02x:%02x.%01x\n",
 		       edev->phb->global_number, pdn->busno,
 		       PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn));
-	pr_warn("EEH: of node=%04x:%02x:%02x:%01x\n",
+	pr_warn("EEH: of node=%04x:%02x:%02x.%01x\n",
 		edev->phb->global_number, pdn->busno,
 		PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn));

--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@ -144,29 +144,14 @@ machine_check_pSeries_1:
 	 * vector
 	 */
 	SET_SCRATCH0(r13)		/* save r13 */
-#ifdef CONFIG_PPC_P7_NAP
-BEGIN_FTR_SECTION
-	/* Running native on arch 2.06 or later, check if we are
-	 * waking up from nap. We only handle no state loss and
-	 * supervisor state loss. We do -not- handle hypervisor
-	 * state loss at this time.
+	/*
+	 * Running native on arch 2.06 or later, we may wakeup from winkle
+	 * inside machine check. If yes, then last bit of HSPGR0 would be set
+	 * to 1. Hence clear it unconditionally.
 	 */
-	mfspr	r13,SPRN_SRR1
-	rlwinm.	r13,r13,47-31,30,31
-	OPT_GET_SPR(r13, SPRN_CFAR, CPU_FTR_CFAR)
-	beq	9f
-
-	mfspr	r13,SPRN_SRR1
-	rlwinm.	r13,r13,47-31,30,31
-	/* waking up from powersave (nap) state */
-	cmpwi	cr1,r13,2
-	/* Total loss of HV state is fatal. let's just stay stuck here */
-	OPT_GET_SPR(r13, SPRN_CFAR, CPU_FTR_CFAR)
-	bgt	cr1,.
-9:
-	OPT_SET_SPR(r13, SPRN_CFAR, CPU_FTR_CFAR)
-END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
-#endif /* CONFIG_PPC_P7_NAP */
+	GET_PACA(r13)
+	clrrdi	r13,r13,1
+	SET_PACA(r13)
 	EXCEPTION_PROLOG_0(PACA_EXMC)
 BEGIN_FTR_SECTION
 	b	machine_check_powernv_early
@ -1273,25 +1258,51 @@ machine_check_handle_early:
 	 * Check if thread was in power saving mode. We come here when any
 	 * of the following is true:
 	 * a. thread wasn't in power saving mode
-	 * b. thread was in power saving mode with no state loss or
-	 *    supervisor state loss
+	 * b. thread was in power saving mode with no state loss,
+	 *    supervisor state loss or hypervisor state loss.
 	 *
-	 * Go back to nap again if (b) is true.
+	 * Go back to nap/sleep/winkle mode again if (b) is true.
 	 */
 	rlwinm.	r11,r12,47-31,30,31	/* Was it in power saving mode? */
 	beq	4f			/* No, it wasn;t */
 	/* Thread was in power saving mode. Go back to nap again. */
 	cmpwi	r11,2
-	bne	3f
-	/* Supervisor state loss */
+	blt	3f
+	/* Supervisor/Hypervisor state loss */
 	li	r0,1
 	stb	r0,PACA_NAPSTATELOST(r13)
 3:	bl	machine_check_queue_event
 	MACHINE_CHECK_HANDLER_WINDUP
 	GET_PACA(r13)
 	ld	r1,PACAR1(r13)
-	li	r3,PNV_THREAD_NAP
-	b	pnv_enter_arch207_idle_mode
+	/*
+	 * Check what idle state this CPU was in and go back to same mode
+	 * again.
+	 */
+	lbz	r3,PACA_THREAD_IDLE_STATE(r13)
+	cmpwi	r3,PNV_THREAD_NAP
+	bgt	10f
+	IDLE_STATE_ENTER_SEQ(PPC_NAP)
+	/* No return */
+10:
+	cmpwi	r3,PNV_THREAD_SLEEP
+	bgt	2f
+	IDLE_STATE_ENTER_SEQ(PPC_SLEEP)
+	/* No return */
+
+2:
+	/*
+	 * Go back to winkle. Please note that this thread was woken up in
+	 * machine check from winkle and have not restored the per-subcore
+	 * state. Hence before going back to winkle, set last bit of HSPGR0
+	 * to 1. This will make sure that if this thread gets woken up
+	 * again at reset vector 0x100 then it will get chance to restore
+	 * the subcore state.
+	 */
+	ori	r13,r13,1
+	SET_PACA(r13)
+	IDLE_STATE_ENTER_SEQ(PPC_WINKLE)
+	/* No return */
 4:
 #endif
 	/*
--- a/arch/powerpc/kernel/idle_book3s.S
+++ b/arch/powerpc/kernel/idle_book3s.S
@ -44,18 +44,6 @@
 				PSSCR_PSLL_MASK | PSSCR_TR_MASK | \
 				PSSCR_MTL_MASK

-/* Idle state entry routines */
-
-#define	IDLE_STATE_ENTER_SEQ(IDLE_INST)				\
-	/* Magic NAP/SLEEP/WINKLE mode enter sequence */	\
-	std	r0,0(r1);					\
-	ptesync;						\
-	ld	r0,0(r1);					\
-1:	cmp	cr0,r0,r0;					\
-	bne	1b;						\
-	IDLE_INST;						\
-	b	.
-
 	.text

 /*
@ -363,8 +351,8 @@ _GLOBAL(power9_idle_stop)
 * cr3 - set to gt if waking up with partial/complete hypervisor state loss
 */
 _GLOBAL(pnv_restore_hyp_resource)
-	ld	r2,PACATOC(r13);
 BEGIN_FTR_SECTION
+	ld	r2,PACATOC(r13);
 	/*
 	 * POWER ISA 3. Use PSSCR to determine if we
 	 * are waking up from deep idle state
@ -395,6 +383,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
 	 */
 	clrldi	r5,r13,63
 	clrrdi	r13,r13,1
+
+	/* Now that we are sure r13 is corrected, load TOC */
+	ld	r2,PACATOC(r13);
 	cmpwi	cr4,r5,1
 	mtspr	SPRN_HSPRG0,r13

--- a/arch/powerpc/kernel/mce.c
+++ b/arch/powerpc/kernel/mce.c
@ -92,7 +92,8 @@ void save_mce_event(struct pt_regs *regs, long handled,
 	mce->in_use = 1;

 	mce->initiator = MCE_INITIATOR_CPU;
-	if (handled)
+	/* Mark it recovered if we have handled it and MSR(RI=1). */
+	if (handled && (regs->msr & MSR_RI))
 		mce->disposition = MCE_DISPOSITION_RECOVERED;
 	else
 		mce->disposition = MCE_DISPOSITION_NOT_RECOVERED;
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@ -78,6 +78,7 @@ EXPORT_SYMBOL(get_pci_dma_ops);
 static int get_phb_number(struct device_node *dn)
 {
 	int ret, phb_id = -1;
+	u32 prop_32;
 	u64 prop;

 	/*
@ -86,8 +87,10 @@ static int get_phb_number(struct device_node *dn)
 	 * reading "ibm,opal-phbid", only present in OPAL environment.
 	 */
 	ret = of_property_read_u64(dn, "ibm,opal-phbid", &prop);
-	if (ret)
-		ret = of_property_read_u32_index(dn, "reg", 1, (u32 *)&prop);
+	if (ret) {
+		ret = of_property_read_u32_index(dn, "reg", 1, &prop_32);
+		prop = prop_32;
+	}

 	if (!ret)
 		phb_id = (int)(prop & (MAX_PHBS - 1));
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@ -1074,26 +1074,6 @@ static inline void restore_sprs(struct thread_struct *old_thread,
 #endif
 }

-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-void flush_tmregs_to_thread(struct task_struct *tsk)
-{
-	/*
-	 * Process self tracing is not yet supported through
-	 * ptrace interface. Ptrace generic code should have
-	 * prevented this from happening in the first place.
-	 * Warn once here with the message, if some how it
-	 * is attempted.
-	 */
-	WARN_ONCE(tsk == current,
-		"Not expecting ptrace on self: TM regs may be incorrect\n");
-
-	/*
-	 * If task is not current, it should have been flushed
-	 * already to it's thread_struct during __switch_to().
-	 */
-}
-#endif
-
 struct task_struct *__switch_to(struct task_struct *prev,
 	struct task_struct *new)
 {
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@ -2940,7 +2940,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,

 	/* Don't print anything after quiesce under OPAL, it crashes OFW */
 	if (of_platform != PLATFORM_OPAL) {
-		prom_printf("Booting Linux via __start() ...\n");
+		prom_printf("Booting Linux via __start() @ 0x%lx ...\n", kbase);
 		prom_debug("->dt_header_start=0x%x\n", hdr);
 	}

--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@ -38,6 +38,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/switch_to.h>
+#include <asm/tm.h>

 #define CREATE_TRACE_POINTS
 #include <trace/events/syscalls.h>
@ -118,6 +119,24 @@ static const struct pt_regs_offset regoffset_table[] = {
 	REG_OFFSET_END,
 };

+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+static void flush_tmregs_to_thread(struct task_struct *tsk)
+{
+	/*
+	 * If task is not current, it will have been flushed already to
+	 * it's thread_struct during __switch_to().
+	 *
+	 * A reclaim flushes ALL the state.
+	 */
+
+	if (tsk == current && MSR_TM_SUSPENDED(mfmsr()))
+		tm_reclaim_current(TM_CAUSE_SIGNAL);
+
+}
+#else
+static inline void flush_tmregs_to_thread(struct task_struct *tsk) { }
+#endif
+
 /**
 * regs_query_register_offset() - query register offset from its name
 * @name:	the name of a register
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@ -93,15 +93,16 @@ notrace unsigned long __init early_init(unsigned long dt_ptr)
 * and we are running with enough of the MMU enabled to have our
 * proper kernel virtual addresses
 *
- * Find out what kind of machine we're on and save any data we need
- * from the early boot process (devtree is copied on pmac by prom_init()).
- * This is called very early on the boot process, after a minimal
- * MMU environment has been set up but before MMU_init is called.
+ * We do the initial parsing of the flat device-tree and prepares
+ * for the MMU to be fully initialized.
 */
 extern unsigned int memset_nocache_branch; /* Insn to be replaced by NOP */

 notrace void __init machine_init(u64 dt_ptr)
 {
+	/* Configure static keys first, now that we're relocated. */
+	setup_feature_keys();
+
 	/* Enable early debugging if any specified (see udbg.h) */
 	udbg_early_init();

--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@ -300,6 +300,7 @@ void __init early_setup(unsigned long dt_ptr)

 	/* Apply all the dynamic patching */
 	apply_feature_fixups();
+	setup_feature_keys();

 	/* Initialize the hash table or TLB handling */
 	early_init_mmu();
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@ -22,6 +22,7 @@
 #include <linux/security.h>
 #include <linux/memblock.h>

+#include <asm/cpu_has_feature.h>
 #include <asm/pgtable.h>
 #include <asm/processor.h>
 #include <asm/mmu.h>
--- a/arch/powerpc/kernel/vdso32/Makefile
+++ b/arch/powerpc/kernel/vdso32/Makefile
@ -30,7 +30,7 @@ CPPFLAGS_vdso32.lds += -P -C -Upowerpc
 $(obj)/vdso32_wrapper.o : $(obj)/vdso32.so

 # link rule for the .so file, .lds has to be first
-$(obj)/vdso32.so.dbg: $(src)/vdso32.lds $(obj-vdso32)
+$(obj)/vdso32.so.dbg: $(src)/vdso32.lds $(obj-vdso32) FORCE
 	$(call if_changed,vdso32ld)

 # strip rule for the .so file
@ -39,12 +39,12 @@ $(obj)/%.so: $(obj)/%.so.dbg FORCE
 	$(call if_changed,objcopy)

 # assembly rules for the .S files
-$(obj-vdso32): %.o: %.S
+$(obj-vdso32): %.o: %.S FORCE
 	$(call if_changed_dep,vdso32as)

 # actual build commands
 quiet_cmd_vdso32ld = VDSO32L $@
-      cmd_vdso32ld = $(CROSS32CC) $(c_flags) -Wl,-T $^ -o $@
+      cmd_vdso32ld = $(CROSS32CC) $(c_flags) -o $@ -Wl,-T$(filter %.lds,$^) $(filter %.o,$^)
 quiet_cmd_vdso32as = VDSO32A $@
      cmd_vdso32as = $(CROSS32CC) $(a_flags) -c -o $@ $<

--- a/arch/powerpc/kernel/vdso64/Makefile
+++ b/arch/powerpc/kernel/vdso64/Makefile
@ -23,7 +23,7 @@ CPPFLAGS_vdso64.lds += -P -C -U$(ARCH)
 $(obj)/vdso64_wrapper.o : $(obj)/vdso64.so

 # link rule for the .so file, .lds has to be first
-$(obj)/vdso64.so.dbg: $(src)/vdso64.lds $(obj-vdso64)
+$(obj)/vdso64.so.dbg: $(src)/vdso64.lds $(obj-vdso64) FORCE
 	$(call if_changed,vdso64ld)

 # strip rule for the .so file
@ -32,12 +32,12 @@ $(obj)/%.so: $(obj)/%.so.dbg FORCE
 	$(call if_changed,objcopy)

 # assembly rules for the .S files
-$(obj-vdso64): %.o: %.S
+$(obj-vdso64): %.o: %.S FORCE
 	$(call if_changed_dep,vdso64as)

 # actual build commands
 quiet_cmd_vdso64ld = VDSO64L $@
-      cmd_vdso64ld = $(CC) $(c_flags) -Wl,-T $^ -o $@
+      cmd_vdso64ld = $(CC) $(c_flags) -o $@ -Wl,-T$(filter %.lds,$^) $(filter %.o,$^)
 quiet_cmd_vdso64as = VDSO64A $@
      cmd_vdso64as = $(CC) $(a_flags) -c -o $@ $<

--- a/arch/powerpc/kvm/book3s_xics.c
+++ b/arch/powerpc/kvm/book3s_xics.c
@ -1329,20 +1329,16 @@ static int kvmppc_xics_create(struct kvm_device *dev, u32 type)
 	xics->kvm = kvm;

 	/* Already there ? */
-	mutex_lock(&kvm->lock);
 	if (kvm->arch.xics)
 		ret = -EEXIST;
 	else
 		kvm->arch.xics = xics;
-	mutex_unlock(&kvm->lock);

 	if (ret) {
 		kfree(xics);
 		return ret;
 	}

-	xics_debugfs_init(xics);
-
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
 	if (cpu_has_feature(CPU_FTR_ARCH_206)) {
 		/* Enable real mode support */
@ -1354,9 +1350,17 @@ static int kvmppc_xics_create(struct kvm_device *dev, u32 type)
 	return 0;
 }

+static void kvmppc_xics_init(struct kvm_device *dev)
+{
+	struct kvmppc_xics *xics = (struct kvmppc_xics *)dev->private;
+
+	xics_debugfs_init(xics);
+}
+
 struct kvm_device_ops kvm_xics_ops = {
 	.name = "kvm-xics",
 	.create = kvmppc_xics_create,
+	.init = kvmppc_xics_init,
 	.destroy = kvmppc_xics_free,
 	.set_attr = xics_set_attr,
 	.get_attr = xics_get_attr,
--- a/arch/powerpc/lib/checksum_32.S
+++ b/arch/powerpc/lib/checksum_32.S
@ -127,8 +127,9 @@ _GLOBAL(csum_partial_copy_generic)
 	stw	r7,12(r1)
 	stw	r8,8(r1)

-	andi.	r0,r4,1			/* is destination address even ? */
-	cmplwi	cr7,r0,0
+	rlwinm	r0,r4,3,0x8
+	rlwnm	r6,r6,r0,0,31	/* odd destination address: rotate one byte */
+	cmplwi	cr7,r0,0	/* is destination address even ? */
 	addic	r12,r6,0
 	addi	r6,r4,-4
 	neg	r0,r4
@ -237,7 +238,7 @@ _GLOBAL(csum_partial_copy_generic)
 66:	addze	r3,r12
 	addi	r1,r1,16
 	beqlr+	cr7
-	rlwinm	r3,r3,8,0,31	/* swap bytes for odd destination */
+	rlwinm	r3,r3,8,0,31	/* odd destination address: rotate one byte */
 	blr

 /* read fault */
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@ -188,7 +188,10 @@ void __init apply_feature_fixups(void)
 			  &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup);
 #endif
 	do_final_fixups();
+}

+void __init setup_feature_keys(void)
+{
 	/*
 	 * Initialise jump label. This causes all the cpu/mmu_has_feature()
 	 * checks to take on their correct polarity based on the current set of
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@ -496,8 +496,10 @@ spufs_mkgang(struct inode *dir, struct dentry *dentry, umode_t mode)
 	gang = alloc_spu_gang();
 	SPUFS_I(inode)->i_ctx = NULL;
 	SPUFS_I(inode)->i_gang = gang;
-	if (!gang)
+	if (!gang) {
+		ret = -ENOMEM;
 		goto out_iput;
+	}

 	inode->i_op = &simple_dir_inode_operations;
 	inode->i_fop = &simple_dir_operations;
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@ -187,6 +187,11 @@ static void pci_dma_dev_setup_pasemi(struct pci_dev *dev)
 	if (dev->vendor == 0x1959 && dev->device == 0xa007 &&
 	    !firmware_has_feature(FW_FEATURE_LPAR)) {
 		dev->dev.archdata.dma_ops = &dma_direct_ops;
+		/*
+		 * Set the coherent DMA mask to prevent the iommu
+		 * being used unnecessarily
+		 */
+		dev->dev.coherent_dma_mask = DMA_BIT_MASK(44);
 		return;
 	}
 #endif
--- a/arch/powerpc/platforms/powernv/opal-irqchip.c
+++ b/arch/powerpc/platforms/powernv/opal-irqchip.c
@ -228,7 +228,8 @@ int __init opal_event_init(void)
 		}

 		/* Install interrupt handler */
-		rc = request_irq(virq, opal_interrupt, 0, "opal", NULL);
+		rc = request_irq(virq, opal_interrupt, IRQF_TRIGGER_LOW,
+				 "opal", NULL);
 		if (rc) {
 			irq_dispose_mapping(virq);
 			pr_warn("Error %d requesting irq %d (0x%x)\n",
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@ -399,6 +399,7 @@ static int opal_recover_mce(struct pt_regs *regs,

 	if (!(regs->msr & MSR_RI)) {
 		/* If MSR_RI isn't set, we cannot recover */
+		pr_err("Machine check interrupt unrecoverable: MSR(RI=0)\n");
 		recovered = 0;
 	} else if (evt->disposition == MCE_DISPOSITION_RECOVERED) {
 		/* Platform corrected itself */
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@ -111,10 +111,17 @@ static int __init iommu_setup(char *str)
 }
 early_param("iommu", iommu_setup);

-static inline bool pnv_pci_is_mem_pref_64(unsigned long flags)
+static inline bool pnv_pci_is_m64(struct pnv_phb *phb, struct resource *r)
 {
-	return ((flags & (IORESOURCE_MEM_64 | IORESOURCE_PREFETCH)) ==
-		(IORESOURCE_MEM_64 | IORESOURCE_PREFETCH));
+	/*
+	 * WARNING: We cannot rely on the resource flags. The Linux PCI
+	 * allocation code sometimes decides to put a 64-bit prefetchable
+	 * BAR in the 32-bit window, so we have to compare the addresses.
+	 *
+	 * For simplicity we only test resource start.
+	 */
+	return (r->start >= phb->ioda.m64_base &&
+		r->start < (phb->ioda.m64_base + phb->ioda.m64_size));
 }

 static struct pnv_ioda_pe *pnv_ioda_init_pe(struct pnv_phb *phb, int pe_no)
@ -229,7 +236,7 @@ static void pnv_ioda_reserve_dev_m64_pe(struct pci_dev *pdev,
 	sgsz = phb->ioda.m64_segsize;
 	for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
 		r = &pdev->resource[i];
-		if (!r->parent || !pnv_pci_is_mem_pref_64(r->flags))
+		if (!r->parent || !pnv_pci_is_m64(phb, r))
 			continue;

 		start = _ALIGN_DOWN(r->start - base, sgsz);
@ -1877,7 +1884,7 @@ static void pnv_pci_phb3_tce_invalidate(struct pnv_ioda_pe *pe, bool rm,
 					unsigned shift, unsigned long index,
 					unsigned long npages)
 {
-	__be64 __iomem *invalidate = pnv_ioda_get_inval_reg(pe->phb, false);
+	__be64 __iomem *invalidate = pnv_ioda_get_inval_reg(pe->phb, rm);
 	unsigned long start, end, inc;

 	/* We'll invalidate DMA address in PE scope */
@ -2863,7 +2870,7 @@ static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev)
 		res = &pdev->resource[i + PCI_IOV_RESOURCES];
 		if (!res->flags || res->parent)
 			continue;
-		if (!pnv_pci_is_mem_pref_64(res->flags)) {
+		if (!pnv_pci_is_m64(phb, res)) {
 			dev_warn(&pdev->dev, "Don't support SR-IOV with"
 					" non M64 VF BAR%d: %pR. \n",
 				 i, res);
@ -2958,7 +2965,7 @@ static void pnv_ioda_setup_pe_res(struct pnv_ioda_pe *pe,
 			index++;
 		}
 	} else if ((res->flags & IORESOURCE_MEM) &&
-		   !pnv_pci_is_mem_pref_64(res->flags)) {
+		   !pnv_pci_is_m64(phb, res)) {
 		region.start = res->start -
 			       phb->hose->mem_offset[0] -
 			       phb->ioda.m32_pci_base;
@ -3083,9 +3090,12 @@ static resource_size_t pnv_pci_window_alignment(struct pci_bus *bus,
 		bridge = bridge->bus->self;
 	}

-	/* We fail back to M32 if M64 isn't supported */
-	if (phb->ioda.m64_segsize &&
-	    pnv_pci_is_mem_pref_64(type))
+	/*
+	 * We fall back to M32 if M64 isn't supported. We enforce the M64
+	 * alignment for any 64-bit resource, PCIe doesn't care and
+	 * bridges only do 64-bit prefetchable anyway.
+	 */
+	if (phb->ioda.m64_segsize && (type & IORESOURCE_MEM_64))
 		return phb->ioda.m64_segsize;
 	if (type & IORESOURCE_MEM)
 		return phb->ioda.m32_segsize;
@ -3125,7 +3135,7 @@ static void pnv_pci_fixup_bridge_resources(struct pci_bus *bus,
 		w = NULL;
 		if (r->flags & type & IORESOURCE_IO)
 			w = &hose->io_resource;
-		else if (pnv_pci_is_mem_pref_64(r->flags) &&
+		else if (pnv_pci_is_m64(phb, r) &&
 			 (type & IORESOURCE_PREFETCH) &&
 			 phb->ioda.m64_segsize)
 			w = &hose->mem_resources[1];
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@ -320,19 +320,6 @@ static int dlpar_remove_device_tree_lmb(struct of_drconf_cell *lmb)
 	return dlpar_update_device_tree_lmb(lmb);
 }

-static struct memory_block *lmb_to_memblock(struct of_drconf_cell *lmb)
-{
-	unsigned long section_nr;
-	struct mem_section *mem_sect;
-	struct memory_block *mem_block;
-
-	section_nr = pfn_to_section_nr(PFN_DOWN(lmb->base_addr));
-	mem_sect = __nr_to_section(section_nr);
-
-	mem_block = find_memory_block(mem_sect);
-	return mem_block;
-}
-
 #ifdef CONFIG_MEMORY_HOTREMOVE
 static int pseries_remove_memblock(unsigned long base, unsigned int memblock_size)
 {
@ -420,6 +407,19 @@ static bool lmb_is_removable(struct of_drconf_cell *lmb)

 static int dlpar_add_lmb(struct of_drconf_cell *);

+static struct memory_block *lmb_to_memblock(struct of_drconf_cell *lmb)
+{
+	unsigned long section_nr;
+	struct mem_section *mem_sect;
+	struct memory_block *mem_block;
+
+	section_nr = pfn_to_section_nr(PFN_DOWN(lmb->base_addr));
+	mem_sect = __nr_to_section(section_nr);
+
+	mem_block = find_memory_block(mem_sect);
+	return mem_block;
+}
+
 static int dlpar_remove_lmb(struct of_drconf_cell *lmb)
 {
 	struct memory_block *mem_block;
--- a/arch/powerpc/sysdev/xics/Kconfig
+++ b/arch/powerpc/sysdev/xics/Kconfig
@ -1,6 +1,7 @@
 config PPC_XICS
       def_bool n
       select PPC_SMP_MUXED_IPI
+       select HARDIRQS_SW_RESEND

 config PPC_ICP_NATIVE
       def_bool n
--- a/arch/powerpc/sysdev/xics/ics-opal.c
+++ b/arch/powerpc/sysdev/xics/ics-opal.c
@ -156,7 +156,9 @@ static struct irq_chip ics_opal_irq_chip = {
 	.irq_mask = ics_opal_mask_irq,
 	.irq_unmask = ics_opal_unmask_irq,
 	.irq_eoi = NULL, /* Patched at init time */
-	.irq_set_affinity = ics_opal_set_affinity
+	.irq_set_affinity = ics_opal_set_affinity,
+	.irq_set_type = xics_set_irq_type,
+	.irq_retrigger = xics_retrigger,
 };

 static int ics_opal_map(struct ics *ics, unsigned int virq);
--- a/arch/powerpc/sysdev/xics/ics-rtas.c
+++ b/arch/powerpc/sysdev/xics/ics-rtas.c
@ -163,7 +163,9 @@ static struct irq_chip ics_rtas_irq_chip = {
 	.irq_mask = ics_rtas_mask_irq,
 	.irq_unmask = ics_rtas_unmask_irq,
 	.irq_eoi = NULL, /* Patched at init time */
-	.irq_set_affinity = ics_rtas_set_affinity
+	.irq_set_affinity = ics_rtas_set_affinity,
+	.irq_set_type = xics_set_irq_type,
+	.irq_retrigger = xics_retrigger,
 };

 static int ics_rtas_map(struct ics *ics, unsigned int virq)
--- a/arch/powerpc/sysdev/xics/xics-common.c
+++ b/arch/powerpc/sysdev/xics/xics-common.c
@ -328,8 +328,12 @@ static int xics_host_map(struct irq_domain *h, unsigned int virq,

 	pr_devel("xics: map virq %d, hwirq 0x%lx\n", virq, hw);

-	/* They aren't all level sensitive but we just don't really know */
-	irq_set_status_flags(virq, IRQ_LEVEL);
+	/*
+	 * Mark interrupts as edge sensitive by default so that resend
+	 * actually works. The device-tree parsing will turn the LSIs
+	 * back to level.
+	 */
+	irq_clear_status_flags(virq, IRQ_LEVEL);

 	/* Don't call into ICS for IPIs */
 	if (hw == XICS_IPI) {
@ -351,13 +355,54 @@ static int xics_host_xlate(struct irq_domain *h, struct device_node *ct,
 			   irq_hw_number_t *out_hwirq, unsigned int *out_flags)

 {
-	/* Current xics implementation translates everything
-	 * to level. It is not technically right for MSIs but this
-	 * is irrelevant at this point. We might get smarter in the future
-	 */
 	*out_hwirq = intspec[0];
-	*out_flags = IRQ_TYPE_LEVEL_LOW;

+	/*
+	 * If intsize is at least 2, we look for the type in the second cell,
+	 * we assume the LSB indicates a level interrupt.
+	 */
+	if (intsize > 1) {
+		if (intspec[1] & 1)
+			*out_flags = IRQ_TYPE_LEVEL_LOW;
+		else
+			*out_flags = IRQ_TYPE_EDGE_RISING;
+	} else
+		*out_flags = IRQ_TYPE_LEVEL_LOW;
+
+	return 0;
+}
+
+int xics_set_irq_type(struct irq_data *d, unsigned int flow_type)
+{
+	/*
+	 * We only support these. This has really no effect other than setting
+	 * the corresponding descriptor bits mind you but those will in turn
+	 * affect the resend function when re-enabling an edge interrupt.
+	 *
+	 * Set set the default to edge as explained in map().
+	 */
+	if (flow_type == IRQ_TYPE_DEFAULT || flow_type == IRQ_TYPE_NONE)
+		flow_type = IRQ_TYPE_EDGE_RISING;
+
+	if (flow_type != IRQ_TYPE_EDGE_RISING &&
+	    flow_type != IRQ_TYPE_LEVEL_LOW)
+		return -EINVAL;
+
+	irqd_set_trigger_type(d, flow_type);
+
+	return IRQ_SET_MASK_OK_NOCOPY;
+}
+
+int xics_retrigger(struct irq_data *data)
+{
+	/*
+	 * We need to push a dummy CPPR when retriggering, since the subsequent
+	 * EOI will try to pop it. Passing 0 works, as the function hard codes
+	 * the priority value anyway.
+	 */
+	xics_push_cppr(0);
+
+	/* Tell the core to do a soft retrigger */
 	return 0;
 }

--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@ -123,6 +123,7 @@ config S390
 	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_EARLY_PFN_TO_NID
+	select HAVE_ARCH_HARDENED_USERCOPY
 	select HAVE_ARCH_JUMP_LABEL
 	select CPU_NO_EFFICIENT_FFS if !HAVE_MARCH_Z9_109_FEATURES
 	select HAVE_ARCH_SECCOMP_FILTER
@ -871,4 +872,17 @@ config S390_GUEST
 	  Select this option if you want to run the kernel as a guest under
 	  the KVM hypervisor.

+config S390_GUEST_OLD_TRANSPORT
+	def_bool y
+	prompt "Guest support for old s390 virtio transport (DEPRECATED)"
+	depends on S390_GUEST
+	help
+	  Enable this option to add support for the old s390-virtio
+	  transport (i.e. virtio devices NOT based on virtio-ccw). This
+	  type of virtio devices is only available on the experimental
+	  kuli userspace or with old (< 2.6) qemu. If you are running
+	  with a modern version of qemu (which supports virtio-ccw since
+	  1.4 and uses it by default since version 2.4), you probably won't
+	  need this.
+
 endmenu
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@ -1672,6 +1672,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 				    KVM_SYNC_CRS |
 				    KVM_SYNC_ARCH0 |
 				    KVM_SYNC_PFAULT;
+	kvm_s390_set_prefix(vcpu, 0);
 	if (test_kvm_facility(vcpu->kvm, 64))
 		vcpu->run->kvm_valid_regs |= KVM_SYNC_RICCB;
 	/* fprs can be synchronized via vrs, even if the guest has no vx. With
@ -2361,8 +2362,10 @@ retry:
 		rc = gmap_mprotect_notify(vcpu->arch.gmap,
 					  kvm_s390_get_prefix(vcpu),
 					  PAGE_SIZE * 2, PROT_WRITE);
-		if (rc)
+		if (rc) {
+			kvm_make_request(KVM_REQ_MMU_RELOAD, vcpu);
 			return rc;
+		}
 		goto retry;
 	}

--- a/arch/s390/lib/uaccess.c
+++ b/arch/s390/lib/uaccess.c
@ -104,6 +104,7 @@ static inline unsigned long copy_from_user_mvcp(void *x, const void __user *ptr,

 unsigned long __copy_from_user(void *to, const void __user *from, unsigned long n)
 {
+	check_object_size(to, n, false);
 	if (static_branch_likely(&have_mvcos))
 		return copy_from_user_mvcos(to, from, n);
 	return copy_from_user_mvcp(to, from, n);
@ -177,6 +178,7 @@ static inline unsigned long copy_to_user_mvcs(void __user *ptr, const void *x,

 unsigned long __copy_to_user(void __user *to, const void *from, unsigned long n)
 {
+	check_object_size(from, n, true);
 	if (static_branch_likely(&have_mvcos))
 		return copy_to_user_mvcos(to, from, n);
 	return copy_to_user_mvcs(to, from, n);
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@ -43,6 +43,7 @@ config SPARC
 	select OLD_SIGSUSPEND
 	select ARCH_HAS_SG_CHAIN
 	select CPU_NO_EFFICIENT_FFS
+	select HAVE_ARCH_HARDENED_USERCOPY

 config SPARC32
 	def_bool !64BIT
--- a/arch/sparc/include/asm/uaccess_32.h
+++ b/arch/sparc/include/asm/uaccess_32.h
@ -248,22 +248,28 @@ unsigned long __copy_user(void __user *to, const void __user *from, unsigned lon

 static inline unsigned long copy_to_user(void __user *to, const void *from, unsigned long n)
 {
-	if (n && __access_ok((unsigned long) to, n))
+	if (n && __access_ok((unsigned long) to, n)) {
+		if (!__builtin_constant_p(n))
+			check_object_size(from, n, true);
 		return __copy_user(to, (__force void __user *) from, n);
-	else
+	} else
 		return n;
 }

 static inline unsigned long __copy_to_user(void __user *to, const void *from, unsigned long n)
 {
+	if (!__builtin_constant_p(n))
+		check_object_size(from, n, true);
 	return __copy_user(to, (__force void __user *) from, n);
 }

 static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n)
 {
-	if (n && __access_ok((unsigned long) from, n))
+	if (n && __access_ok((unsigned long) from, n)) {
+		if (!__builtin_constant_p(n))
+			check_object_size(to, n, false);
 		return __copy_user((__force void __user *) to, from, n);
-	else
+	} else
 		return n;
 }

--- a/arch/sparc/include/asm/uaccess_64.h
+++ b/arch/sparc/include/asm/uaccess_64.h
@ -210,8 +210,12 @@ unsigned long copy_from_user_fixup(void *to, const void __user *from,
 static inline unsigned long __must_check
 copy_from_user(void *to, const void __user *from, unsigned long size)
 {
-	unsigned long ret = ___copy_from_user(to, from, size);
+	unsigned long ret;

+	if (!__builtin_constant_p(size))
+		check_object_size(to, size, false);
+
+	ret = ___copy_from_user(to, from, size);
 	if (unlikely(ret))
 		ret = copy_from_user_fixup(to, from, size);

@ -227,8 +231,11 @@ unsigned long copy_to_user_fixup(void __user *to, const void *from,
 static inline unsigned long __must_check
 copy_to_user(void __user *to, const void *from, unsigned long size)
 {
-	unsigned long ret = ___copy_to_user(to, from, size);
+	unsigned long ret;

+	if (!__builtin_constant_p(size))
+		check_object_size(from, size, true);
+	ret = ___copy_to_user(to, from, size);
 	if (unlikely(ret))
 		ret = copy_to_user_fixup(to, from, size);
 	return ret;
--- a/arch/unicore32/include/asm/mmu_context.h
+++ b/arch/unicore32/include/asm/mmu_context.h
@ -98,7 +98,7 @@ static inline void arch_bprm_mm_init(struct mm_struct *mm,
 }

 static inline bool arch_vma_access_permitted(struct vm_area_struct *vma,
-		bool write, bool foreign)
+		bool write, bool execute, bool foreign)
 {
 	/* by default, allow everything */
 	return true;
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@ -80,6 +80,7 @@ config X86
 	select HAVE_ALIGNED_STRUCT_PAGE		if SLUB
 	select HAVE_AOUT			if X86_32
 	select HAVE_ARCH_AUDITSYSCALL
+	select HAVE_ARCH_HARDENED_USERCOPY
 	select HAVE_ARCH_HUGE_VMAP		if X86_64 || X86_PAE
 	select HAVE_ARCH_JUMP_LABEL
 	select HAVE_ARCH_KASAN			if X86_64 && SPARSEMEM_VMEMMAP
@ -91,6 +92,7 @@ config X86
 	select HAVE_ARCH_SOFT_DIRTY		if X86_64
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
+	select HAVE_ARCH_WITHIN_STACK_FRAMES
 	select HAVE_EBPF_JIT			if X86_64
 	select HAVE_CC_STACKPROTECTOR
 	select HAVE_CMPXCHG_DOUBLE
--- a/arch/x86/entry/Makefile
+++ b/arch/x86/entry/Makefile
@ -5,6 +5,8 @@
 OBJECT_FILES_NON_STANDARD_entry_$(BITS).o   := y
 OBJECT_FILES_NON_STANDARD_entry_64_compat.o := y

+CFLAGS_syscall_64.o		+= -Wno-override-init
+CFLAGS_syscall_32.o		+= -Wno-override-init
 obj-y				:= entry_$(BITS).o thunk_$(BITS).o syscall_$(BITS).o
 obj-y				+= common.o

--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@ -288,11 +288,15 @@ return_from_SYSCALL_64:
 	jne	opportunistic_sysret_failed

 	/*
-	 * SYSRET can't restore RF.  SYSRET can restore TF, but unlike IRET,
-	 * restoring TF results in a trap from userspace immediately after
-	 * SYSRET.  This would cause an infinite loop whenever #DB happens
-	 * with register state that satisfies the opportunistic SYSRET
-	 * conditions.  For example, single-stepping this user code:
+	 * SYSCALL clears RF when it saves RFLAGS in R11 and SYSRET cannot
+	 * restore RF properly. If the slowpath sets it for whatever reason, we
+	 * need to restore it correctly.
+	 *
+	 * SYSRET can restore TF, but unlike IRET, restoring TF results in a
+	 * trap from userspace immediately after SYSRET.  This would cause an
+	 * infinite loop whenever #DB happens with register state that satisfies
+	 * the opportunistic SYSRET conditions.  For example, single-stepping
+	 * this user code:
 	 *
 	 *           movq	$stuck_here, %rcx
 	 *           pushfq
@ -601,9 +605,20 @@ apicinterrupt3 \num trace(\sym) smp_trace(\sym)
 .endm
 #endif

+/* Make sure APIC interrupt handlers end up in the irqentry section: */
+#if defined(CONFIG_FUNCTION_GRAPH_TRACER) || defined(CONFIG_KASAN)
+# define PUSH_SECTION_IRQENTRY	.pushsection .irqentry.text, "ax"
+# define POP_SECTION_IRQENTRY	.popsection
+#else
+# define PUSH_SECTION_IRQENTRY
+# define POP_SECTION_IRQENTRY
+#endif
+
 .macro apicinterrupt num sym do_sym
+PUSH_SECTION_IRQENTRY
 apicinterrupt3 \num \sym \do_sym
 trace_apicinterrupt \num \sym
+POP_SECTION_IRQENTRY
 .endm

 #ifdef CONFIG_SMP
--- a/arch/x86/events/intel/uncore_snb.c
+++ b/arch/x86/events/intel/uncore_snb.c
@ -100,6 +100,12 @@ static void snb_uncore_msr_init_box(struct intel_uncore_box *box)
 	}
 }

+static void snb_uncore_msr_enable_box(struct intel_uncore_box *box)
+{
+	wrmsrl(SNB_UNC_PERF_GLOBAL_CTL,
+		SNB_UNC_GLOBAL_CTL_EN | SNB_UNC_GLOBAL_CTL_CORE_ALL);
+}
+
 static void snb_uncore_msr_exit_box(struct intel_uncore_box *box)
 {
 	if (box->pmu->pmu_idx == 0)
@ -127,6 +133,7 @@ static struct attribute_group snb_uncore_format_group = {

 static struct intel_uncore_ops snb_uncore_msr_ops = {
 	.init_box	= snb_uncore_msr_init_box,
+	.enable_box	= snb_uncore_msr_enable_box,
 	.exit_box	= snb_uncore_msr_exit_box,
 	.disable_event	= snb_uncore_msr_disable_event,
 	.enable_event	= snb_uncore_msr_enable_event,
@ -192,6 +199,12 @@ static void skl_uncore_msr_init_box(struct intel_uncore_box *box)
 	}
 }

+static void skl_uncore_msr_enable_box(struct intel_uncore_box *box)
+{
+	wrmsrl(SKL_UNC_PERF_GLOBAL_CTL,
+		SNB_UNC_GLOBAL_CTL_EN | SKL_UNC_GLOBAL_CTL_CORE_ALL);
+}
+
 static void skl_uncore_msr_exit_box(struct intel_uncore_box *box)
 {
 	if (box->pmu->pmu_idx == 0)
@ -200,6 +213,7 @@ static void skl_uncore_msr_exit_box(struct intel_uncore_box *box)

 static struct intel_uncore_ops skl_uncore_msr_ops = {
 	.init_box	= skl_uncore_msr_init_box,
+	.enable_box	= skl_uncore_msr_enable_box,
 	.exit_box	= skl_uncore_msr_exit_box,
 	.disable_event	= snb_uncore_msr_disable_event,
 	.enable_event	= snb_uncore_msr_enable_event,
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@ -2626,7 +2626,7 @@ void hswep_uncore_cpu_init(void)

 static struct intel_uncore_type hswep_uncore_ha = {
 	.name		= "ha",
-	.num_counters   = 5,
+	.num_counters   = 4,
 	.num_boxes	= 2,
 	.perf_ctr_bits	= 48,
 	SNBEP_UNCORE_PCI_COMMON_INIT(),
@ -2645,7 +2645,7 @@ static struct uncore_event_desc hswep_uncore_imc_events[] = {

 static struct intel_uncore_type hswep_uncore_imc = {
 	.name		= "imc",
-	.num_counters   = 5,
+	.num_counters   = 4,
 	.num_boxes	= 8,
 	.perf_ctr_bits	= 48,
 	.fixed_ctr_bits	= 48,
@ -2691,7 +2691,7 @@ static struct intel_uncore_type hswep_uncore_irp = {

 static struct intel_uncore_type hswep_uncore_qpi = {
 	.name			= "qpi",
-	.num_counters		= 5,
+	.num_counters		= 4,
 	.num_boxes		= 3,
 	.perf_ctr_bits		= 48,
 	.perf_ctr		= SNBEP_PCI_PMON_CTR0,
@ -2773,7 +2773,7 @@ static struct event_constraint hswep_uncore_r3qpi_constraints[] = {

 static struct intel_uncore_type hswep_uncore_r3qpi = {
 	.name		= "r3qpi",
-	.num_counters   = 4,
+	.num_counters   = 3,
 	.num_boxes	= 3,
 	.perf_ctr_bits	= 44,
 	.constraints	= hswep_uncore_r3qpi_constraints,
@ -2972,7 +2972,7 @@ static struct intel_uncore_type bdx_uncore_ha = {

 static struct intel_uncore_type bdx_uncore_imc = {
 	.name		= "imc",
-	.num_counters   = 5,
+	.num_counters   = 4,
 	.num_boxes	= 8,
 	.perf_ctr_bits	= 48,
 	.fixed_ctr_bits	= 48,
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@ -135,6 +135,7 @@ extern void init_apic_mappings(void);
 void register_lapic_address(unsigned long address);
 extern void setup_boot_APIC_clock(void);
 extern void setup_secondary_APIC_clock(void);
+extern void lapic_update_tsc_freq(void);
 extern int APIC_init_uniprocessor(void);

 #ifdef CONFIG_X86_64
@ -170,6 +171,7 @@ static inline void init_apic_mappings(void) { }
 static inline void disable_local_APIC(void) { }
 # define setup_boot_APIC_clock x86_init_noop
 # define setup_secondary_APIC_clock x86_init_noop
+static inline void lapic_update_tsc_freq(void) { }
 #endif /* !CONFIG_X86_LOCAL_APIC */

 #ifdef CONFIG_X86_X2APIC
--- a/arch/x86/include/asm/hardirq.h
+++ b/arch/x86/include/asm/hardirq.h
@ -22,10 +22,6 @@ typedef struct {
 #ifdef CONFIG_SMP
 	unsigned int irq_resched_count;
 	unsigned int irq_call_count;
-	/*
-	 * irq_tlb_count is double-counted in irq_call_count, so it must be
-	 * subtracted from irq_call_count when displaying irq_call_count
-	 */
 	unsigned int irq_tlb_count;
 #endif
 #ifdef CONFIG_X86_THERMAL_VECTOR
--- a/arch/x86/include/asm/init.h
+++ b/arch/x86/include/asm/init.h
@ -5,10 +5,10 @@ struct x86_mapping_info {
 	void *(*alloc_pgt_page)(void *); /* allocate buf for page table */
 	void *context;			 /* context for alloc_pgt_page */
 	unsigned long pmd_flag;		 /* page flag for PMD entry */
-	bool kernel_mapping;		 /* kernel mapping or ident mapping */
+	unsigned long offset;		 /* ident mapping offset */
 };

 int kernel_ident_mapping_init(struct x86_mapping_info *info, pgd_t *pgd_page,
-				unsigned long addr, unsigned long end);
+				unsigned long pstart, unsigned long pend);

 #endif /* _ASM_X86_INIT_H */
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@ -145,7 +145,7 @@ static inline int pgd_large(pgd_t pgd) { return 0; }
 *
 * |     ...            | 11| 10|  9|8|7|6|5| 4| 3|2|1|0| <- bit number
 * |     ...            |SW3|SW2|SW1|G|L|D|A|CD|WT|U|W|P| <- bit names
- * | OFFSET (14->63) | TYPE (10-13) |0|X|X|X| X| X|X|X|0| <- swp entry
+ * | OFFSET (14->63) | TYPE (9-13)  |0|X|X|X| X| X|X|X|0| <- swp entry
 *
 * G (8) is aliased and used as a PROT_NONE indicator for
 * !present ptes.  We need to start storing swap entries above
@ -156,7 +156,7 @@ static inline int pgd_large(pgd_t pgd) { return 0; }
 #define SWP_TYPE_FIRST_BIT (_PAGE_BIT_PROTNONE + 1)
 #define SWP_TYPE_BITS 5
 /* Place the offset above the type: */
-#define SWP_OFFSET_FIRST_BIT (SWP_TYPE_FIRST_BIT + SWP_TYPE_BITS + 1)
+#define SWP_OFFSET_FIRST_BIT (SWP_TYPE_FIRST_BIT + SWP_TYPE_BITS)

 #define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > SWP_TYPE_BITS)

--- a/arch/x86/include/asm/realmode.h
+++ b/arch/x86/include/asm/realmode.h
@ -58,7 +58,15 @@ extern unsigned char boot_gdt[];
 extern unsigned char secondary_startup_64[];
 #endif

+static inline size_t real_mode_size_needed(void)
+{
+	if (real_mode_header)
+		return 0;	/* already allocated. */
+
+	return ALIGN(real_mode_blob_end - real_mode_blob, PAGE_SIZE);
+}
+
+void set_real_mode_mem(phys_addr_t mem, size_t size);
 void reserve_real_mode(void);
-void setup_real_mode(void);

 #endif /* _ARCH_X86_REALMODE_H */
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@ -176,6 +176,50 @@ static inline unsigned long current_stack_pointer(void)
 	return sp;
 }

+/*
+ * Walks up the stack frames to make sure that the specified object is
+ * entirely contained by a single stack frame.
+ *
+ * Returns:
+ *		 1 if within a frame
+ *		-1 if placed across a frame boundary (or outside stack)
+ *		 0 unable to determine (no frame pointers, etc)
+ */
+static inline int arch_within_stack_frames(const void * const stack,
+					   const void * const stackend,
+					   const void *obj, unsigned long len)
+{
+#if defined(CONFIG_FRAME_POINTER)
+	const void *frame = NULL;
+	const void *oldframe;
+
+	oldframe = __builtin_frame_address(1);
+	if (oldframe)
+		frame = __builtin_frame_address(2);
+	/*
+	 * low ----------------------------------------------> high
+	 * [saved bp][saved ip][args][local vars][saved bp][saved ip]
+	 *                     ^----------------^
+	 *               allow copies only within here
+	 */
+	while (stack <= frame && frame < stackend) {
+		/*
+		 * If obj + len extends past the last frame, this
+		 * check won't pass and the next frame will be 0,
+		 * causing us to bail out and correctly report
+		 * the copy as invalid.
+		 */
+		if (obj + len <= frame)
+			return obj >= oldframe + 2 * sizeof(void *) ? 1 : -1;
+		oldframe = frame;
+		frame = *(const void * const *)frame;
+	}
+	return -1;
+#else
+	return 0;
+#endif
+}
+
 #else /* !__ASSEMBLY__ */

 #ifdef CONFIG_X86_64
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@ -135,7 +135,14 @@ static inline void cr4_set_bits_and_update_boot(unsigned long mask)

 static inline void __native_flush_tlb(void)
 {
+	/*
+	 * If current->mm == NULL then we borrow a mm which may change during a
+	 * task switch and therefore we must not be preempted while we write CR3
+	 * back:
+	 */
+	preempt_disable();
 	native_write_cr3(native_read_cr3());
+	preempt_enable();
 }

 static inline void __native_flush_tlb_global_irq_disabled(void)
--- a/Show More
+++ b/Show More