diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 5e6468a7ca4b..dc7596f028b6 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -56,6 +56,12 @@ MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip) static int ahci_enable_alpm(struct ata_port *ap, enum link_pm policy); static void ahci_disable_alpm(struct ata_port *ap); +static ssize_t ahci_led_show(struct ata_port *ap, char *buf); +static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, + size_t size); +static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, + ssize_t size); +#define MAX_SLOTS 8 enum { AHCI_PCI_BAR = 5, @@ -98,6 +104,8 @@ enum { HOST_IRQ_STAT = 0x08, /* interrupt status */ HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */ HOST_VERSION = 0x10, /* AHCI spec. version compliancy */ + HOST_EM_LOC = 0x1c, /* Enclosure Management location */ + HOST_EM_CTL = 0x20, /* Enclosure Management Control */ /* HOST_CTL bits */ HOST_RESET = (1 << 0), /* reset controller; self-clear */ @@ -105,6 +113,7 @@ enum { HOST_AHCI_EN = (1 << 31), /* AHCI enabled */ /* HOST_CAP bits */ + HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */ HOST_CAP_SSC = (1 << 14), /* Slumber capable */ HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */ HOST_CAP_CLO = (1 << 24), /* Command List Override support */ @@ -202,6 +211,11 @@ enum { ATA_FLAG_IPM, ICH_MAP = 0x90, /* ICH MAP register */ + + /* em_ctl bits */ + EM_CTL_RST = (1 << 9), /* Reset */ + EM_CTL_TM = (1 << 8), /* Transmit Message */ + EM_CTL_ALHD = (1 << 26), /* Activity LED */ }; struct ahci_cmd_hdr { @@ -219,12 +233,21 @@ struct ahci_sg { __le32 flags_size; }; +struct ahci_em_priv { + enum sw_activity blink_policy; + struct timer_list timer; + unsigned long saved_activity; + unsigned long activity; + unsigned long led_state; +}; + struct ahci_host_priv { unsigned int flags; /* AHCI_HFLAG_* */ u32 cap; /* cap to use */ u32 port_map; /* port map to use */ u32 saved_cap; /* saved initial cap */ u32 saved_port_map; /* saved initial port_map */ + u32 em_loc; /* enclosure management location */ }; struct ahci_port_priv { @@ -240,6 +263,8 @@ struct ahci_port_priv { unsigned int ncq_saw_dmas:1; unsigned int ncq_saw_sdb:1; u32 intr_mask; /* interrupts to enable */ + struct ahci_em_priv em_priv[MAX_SLOTS];/* enclosure management info + * per PM slot */ }; static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val); @@ -277,9 +302,20 @@ static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg); static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); static int ahci_pci_device_resume(struct pci_dev *pdev); #endif +static ssize_t ahci_activity_show(struct ata_device *dev, char *buf); +static ssize_t ahci_activity_store(struct ata_device *dev, + enum sw_activity val); +static void ahci_init_sw_activity(struct ata_link *link); static struct device_attribute *ahci_shost_attrs[] = { &dev_attr_link_power_management_policy, + &dev_attr_em_message_type, + &dev_attr_em_message, + NULL +}; + +static struct device_attribute *ahci_sdev_attrs[] = { + &dev_attr_sw_activity, NULL }; @@ -289,6 +325,7 @@ static struct scsi_host_template ahci_sht = { .sg_tablesize = AHCI_MAX_SG, .dma_boundary = AHCI_DMA_BOUNDARY, .shost_attrs = ahci_shost_attrs, + .sdev_attrs = ahci_sdev_attrs, }; static struct ata_port_operations ahci_ops = { @@ -316,6 +353,10 @@ static struct ata_port_operations ahci_ops = { .enable_pm = ahci_enable_alpm, .disable_pm = ahci_disable_alpm, + .em_show = ahci_led_show, + .em_store = ahci_led_store, + .sw_activity_show = ahci_activity_show, + .sw_activity_store = ahci_activity_store, #ifdef CONFIG_PM .port_suspend = ahci_port_suspend, .port_resume = ahci_port_resume, @@ -561,6 +602,11 @@ static struct pci_driver ahci_pci_driver = { #endif }; +static int ahci_em_messages = 1; +module_param(ahci_em_messages, int, 0444); +/* add other LED protocol types when they become supported */ +MODULE_PARM_DESC(ahci_em_messages, + "Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED"); static inline int ahci_nr_ports(u32 cap) { @@ -1031,11 +1077,28 @@ static void ahci_power_down(struct ata_port *ap) static void ahci_start_port(struct ata_port *ap) { + struct ahci_port_priv *pp = ap->private_data; + struct ata_link *link; + struct ahci_em_priv *emp; + /* enable FIS reception */ ahci_start_fis_rx(ap); /* enable DMA */ ahci_start_engine(ap); + + /* turn on LEDs */ + if (ap->flags & ATA_FLAG_EM) { + ata_port_for_each_link(link, ap) { + emp = &pp->em_priv[link->pmp]; + ahci_transmit_led_message(ap, emp->led_state, 4); + } + } + + if (ap->flags & ATA_FLAG_SW_ACTIVITY) + ata_port_for_each_link(link, ap) + ahci_init_sw_activity(link); + } static int ahci_deinit_port(struct ata_port *ap, const char **emsg) @@ -1079,12 +1142,15 @@ static int ahci_reset_controller(struct ata_host *host) readl(mmio + HOST_CTL); /* flush */ } - /* reset must complete within 1 second, or + /* + * to perform host reset, OS should set HOST_RESET + * and poll until this bit is read to be "0". + * reset must complete within 1 second, or * the hardware should be considered fried. */ - ssleep(1); + tmp = ata_wait_register(mmio + HOST_CTL, HOST_RESET, + HOST_RESET, 10, 1000); - tmp = readl(mmio + HOST_CTL); if (tmp & HOST_RESET) { dev_printk(KERN_ERR, host->dev, "controller reset failed (0x%x)\n", tmp); @@ -1116,6 +1182,230 @@ static int ahci_reset_controller(struct ata_host *host) return 0; } +static void ahci_sw_activity(struct ata_link *link) +{ + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; + + if (!(link->flags & ATA_LFLAG_SW_ACTIVITY)) + return; + + emp->activity++; + if (!timer_pending(&emp->timer)) + mod_timer(&emp->timer, jiffies + msecs_to_jiffies(10)); +} + +static void ahci_sw_activity_blink(unsigned long arg) +{ + struct ata_link *link = (struct ata_link *)arg; + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; + unsigned long led_message = emp->led_state; + u32 activity_led_state; + + led_message &= 0xffff0000; + led_message |= ap->port_no | (link->pmp << 8); + + /* check to see if we've had activity. If so, + * toggle state of LED and reset timer. If not, + * turn LED to desired idle state. + */ + if (emp->saved_activity != emp->activity) { + emp->saved_activity = emp->activity; + /* get the current LED state */ + activity_led_state = led_message & 0x00010000; + + if (activity_led_state) + activity_led_state = 0; + else + activity_led_state = 1; + + /* clear old state */ + led_message &= 0xfff8ffff; + + /* toggle state */ + led_message |= (activity_led_state << 16); + mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100)); + } else { + /* switch to idle */ + led_message &= 0xfff8ffff; + if (emp->blink_policy == BLINK_OFF) + led_message |= (1 << 16); + } + ahci_transmit_led_message(ap, led_message, 4); +} + +static void ahci_init_sw_activity(struct ata_link *link) +{ + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; + + /* init activity stats, setup timer */ + emp->saved_activity = emp->activity = 0; + setup_timer(&emp->timer, ahci_sw_activity_blink, (unsigned long)link); + + /* check our blink policy and set flag for link if it's enabled */ + if (emp->blink_policy) + link->flags |= ATA_LFLAG_SW_ACTIVITY; +} + +static int ahci_reset_em(struct ata_host *host) +{ + void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; + u32 em_ctl; + + em_ctl = readl(mmio + HOST_EM_CTL); + if ((em_ctl & EM_CTL_TM) || (em_ctl & EM_CTL_RST)) + return -EINVAL; + + writel(em_ctl | EM_CTL_RST, mmio + HOST_EM_CTL); + return 0; +} + +static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, + ssize_t size) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + struct ahci_port_priv *pp = ap->private_data; + void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR]; + u32 em_ctl; + u32 message[] = {0, 0}; + unsigned int flags; + int pmp; + struct ahci_em_priv *emp; + + /* get the slot number from the message */ + pmp = (state & 0x0000ff00) >> 8; + if (pmp < MAX_SLOTS) + emp = &pp->em_priv[pmp]; + else + return -EINVAL; + + spin_lock_irqsave(ap->lock, flags); + + /* + * if we are still busy transmitting a previous message, + * do not allow + */ + em_ctl = readl(mmio + HOST_EM_CTL); + if (em_ctl & EM_CTL_TM) { + spin_unlock_irqrestore(ap->lock, flags); + return -EINVAL; + } + + /* + * create message header - this is all zero except for + * the message size, which is 4 bytes. + */ + message[0] |= (4 << 8); + + /* ignore 0:4 of byte zero, fill in port info yourself */ + message[1] = ((state & 0xfffffff0) | ap->port_no); + + /* write message to EM_LOC */ + writel(message[0], mmio + hpriv->em_loc); + writel(message[1], mmio + hpriv->em_loc+4); + + /* save off new led state for port/slot */ + emp->led_state = message[1]; + + /* + * tell hardware to transmit the message + */ + writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL); + + spin_unlock_irqrestore(ap->lock, flags); + return size; +} + +static ssize_t ahci_led_show(struct ata_port *ap, char *buf) +{ + struct ahci_port_priv *pp = ap->private_data; + struct ata_link *link; + struct ahci_em_priv *emp; + int rc = 0; + + ata_port_for_each_link(link, ap) { + emp = &pp->em_priv[link->pmp]; + rc += sprintf(buf, "%lx\n", emp->led_state); + } + return rc; +} + +static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, + size_t size) +{ + int state; + int pmp; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_em_priv *emp; + + state = simple_strtoul(buf, NULL, 0); + + /* get the slot number from the message */ + pmp = (state & 0x0000ff00) >> 8; + if (pmp < MAX_SLOTS) + emp = &pp->em_priv[pmp]; + else + return -EINVAL; + + /* mask off the activity bits if we are in sw_activity + * mode, user should turn off sw_activity before setting + * activity led through em_message + */ + if (emp->blink_policy) + state &= 0xfff8ffff; + + return ahci_transmit_led_message(ap, state, size); +} + +static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val) +{ + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; + u32 port_led_state = emp->led_state; + + /* save the desired Activity LED behavior */ + if (val == OFF) { + /* clear LFLAG */ + link->flags &= ~(ATA_LFLAG_SW_ACTIVITY); + + /* set the LED to OFF */ + port_led_state &= 0xfff80000; + port_led_state |= (ap->port_no | (link->pmp << 8)); + ahci_transmit_led_message(ap, port_led_state, 4); + } else { + link->flags |= ATA_LFLAG_SW_ACTIVITY; + if (val == BLINK_OFF) { + /* set LED to ON for idle */ + port_led_state &= 0xfff80000; + port_led_state |= (ap->port_no | (link->pmp << 8)); + port_led_state |= 0x00010000; /* check this */ + ahci_transmit_led_message(ap, port_led_state, 4); + } + } + emp->blink_policy = val; + return 0; +} + +static ssize_t ahci_activity_show(struct ata_device *dev, char *buf) +{ + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; + + /* display the saved value of activity behavior for this + * disk. + */ + return sprintf(buf, "%d\n", emp->blink_policy); +} + static void ahci_port_init(struct pci_dev *pdev, struct ata_port *ap, int port_no, void __iomem *mmio, void __iomem *port_mmio) @@ -1846,7 +2136,8 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) if (qc->tf.protocol == ATA_PROT_NCQ) writel(1 << qc->tag, port_mmio + PORT_SCR_ACT); writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE); - readl(port_mmio + PORT_CMD_ISSUE); /* flush */ + + ahci_sw_activity(qc->dev->link); return 0; } @@ -2154,7 +2445,8 @@ static void ahci_print_info(struct ata_host *host) dev_printk(KERN_INFO, &pdev->dev, "flags: " "%s%s%s%s%s%s%s" - "%s%s%s%s%s%s%s\n" + "%s%s%s%s%s%s%s" + "%s\n" , cap & (1 << 31) ? "64bit " : "", @@ -2171,7 +2463,8 @@ static void ahci_print_info(struct ata_host *host) cap & (1 << 17) ? "pmp " : "", cap & (1 << 15) ? "pio " : "", cap & (1 << 14) ? "slum " : "", - cap & (1 << 13) ? "part " : "" + cap & (1 << 13) ? "part " : "", + cap & (1 << 6) ? "ems ": "" ); } @@ -2291,6 +2584,24 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (hpriv->cap & HOST_CAP_PMP) pi.flags |= ATA_FLAG_PMP; + if (ahci_em_messages && (hpriv->cap & HOST_CAP_EMS)) { + u8 messages; + void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR]; + u32 em_loc = readl(mmio + HOST_EM_LOC); + u32 em_ctl = readl(mmio + HOST_EM_CTL); + + messages = (em_ctl & 0x000f0000) >> 16; + + /* we only support LED message type right now */ + if ((messages & 0x01) && (ahci_em_messages == 1)) { + /* store em_loc */ + hpriv->em_loc = ((em_loc >> 16) * 4); + pi.flags |= ATA_FLAG_EM; + if (!(em_ctl & EM_CTL_ALHD)) + pi.flags |= ATA_FLAG_SW_ACTIVITY; + } + } + /* CAP.NP sometimes indicate the index of the last enabled * port, at other times, that of the last possible port, so * determining the maximum port number requires looking at @@ -2304,6 +2615,9 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) host->iomap = pcim_iomap_table(pdev); host->private_data = hpriv; + if (pi.flags & ATA_FLAG_EM) + ahci_reset_em(host); + for (i = 0; i < host->n_ports; i++) { struct ata_port *ap = host->ports[i]; @@ -2314,6 +2628,11 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* set initial link pm policy */ ap->pm_policy = NOT_AVAILABLE; + /* set enclosure management message type */ + if (ap->flags & ATA_FLAG_EM) + ap->em_message_type = ahci_em_messages; + + /* disabled/not-implemented port */ if (!(hpriv->port_map & (1 << i))) ap->ops = &ata_dummy_port_ops; diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 303fc0d2b978..9bef1a84fe3f 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -54,7 +54,6 @@ #include #include #include -#include #include #include #include @@ -145,7 +144,7 @@ static int libata_dma_mask = ATA_DMA_MASK_ATA|ATA_DMA_MASK_ATAPI|ATA_DMA_MASK_CF module_param_named(dma, libata_dma_mask, int, 0444); MODULE_PARM_DESC(dma, "DMA enable/disable (0x1==ATA, 0x2==ATAPI, 0x4==CF)"); -static int ata_probe_timeout = ATA_TMOUT_INTERNAL / HZ; +static int ata_probe_timeout; module_param(ata_probe_timeout, int, 0444); MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)"); @@ -1533,7 +1532,7 @@ unsigned long ata_id_xfermask(const u16 *id) * @ap: The ata_port to queue port_task for * @fn: workqueue function to be scheduled * @data: data for @fn to use - * @delay: delay time for workqueue function + * @delay: delay time in msecs for workqueue function * * Schedule @fn(@data) for execution after @delay jiffies using * port_task. There is one port_task per port and it's the @@ -1552,7 +1551,7 @@ void ata_pio_queue_task(struct ata_port *ap, void *data, unsigned long delay) ap->port_task_data = data; /* may fail if ata_port_flush_task() in progress */ - queue_delayed_work(ata_wq, &ap->port_task, delay); + queue_delayed_work(ata_wq, &ap->port_task, msecs_to_jiffies(delay)); } /** @@ -1612,6 +1611,7 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, struct ata_link *link = dev->link; struct ata_port *ap = link->ap; u8 command = tf->command; + int auto_timeout = 0; struct ata_queued_cmd *qc; unsigned int tag, preempted_tag; u32 preempted_sactive, preempted_qc_active; @@ -1684,8 +1684,14 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, spin_unlock_irqrestore(ap->lock, flags); - if (!timeout) - timeout = ata_probe_timeout * 1000 / HZ; + if (!timeout) { + if (ata_probe_timeout) + timeout = ata_probe_timeout * 1000; + else { + timeout = ata_internal_cmd_timeout(dev, command); + auto_timeout = 1; + } + } rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout)); @@ -1761,6 +1767,9 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, spin_unlock_irqrestore(ap->lock, flags); + if ((err_mask & AC_ERR_TIMEOUT) && auto_timeout) + ata_internal_cmd_timed_out(dev, command); + return err_mask; } @@ -3319,7 +3328,7 @@ int ata_wait_ready(struct ata_link *link, unsigned long deadline, int (*check_ready)(struct ata_link *link)) { unsigned long start = jiffies; - unsigned long nodev_deadline = start + ATA_TMOUT_FF_WAIT; + unsigned long nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT); int warned = 0; if (time_after(nodev_deadline, deadline)) @@ -3387,7 +3396,7 @@ int ata_wait_ready(struct ata_link *link, unsigned long deadline, int ata_wait_after_reset(struct ata_link *link, unsigned long deadline, int (*check_ready)(struct ata_link *link)) { - msleep(ATA_WAIT_AFTER_RESET_MSECS); + msleep(ATA_WAIT_AFTER_RESET); return ata_wait_ready(link, deadline, check_ready); } @@ -3417,13 +3426,13 @@ int ata_wait_after_reset(struct ata_link *link, unsigned long deadline, int sata_link_debounce(struct ata_link *link, const unsigned long *params, unsigned long deadline) { - unsigned long interval_msec = params[0]; - unsigned long duration = msecs_to_jiffies(params[1]); + unsigned long interval = params[0]; + unsigned long duration = params[1]; unsigned long last_jiffies, t; u32 last, cur; int rc; - t = jiffies + msecs_to_jiffies(params[2]); + t = ata_deadline(jiffies, params[2]); if (time_before(t, deadline)) deadline = t; @@ -3435,7 +3444,7 @@ int sata_link_debounce(struct ata_link *link, const unsigned long *params, last_jiffies = jiffies; while (1) { - msleep(interval_msec); + msleep(interval); if ((rc = sata_scr_read(link, SCR_STATUS, &cur))) return rc; cur &= 0xf; @@ -3444,7 +3453,8 @@ int sata_link_debounce(struct ata_link *link, const unsigned long *params, if (cur == last) { if (cur == 1 && time_before(jiffies, deadline)) continue; - if (time_after(jiffies, last_jiffies + duration)) + if (time_after(jiffies, + ata_deadline(last_jiffies, duration))) return 0; continue; } @@ -3636,7 +3646,8 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing, if (check_ready) { unsigned long pmp_deadline; - pmp_deadline = jiffies + ATA_TMOUT_PMP_SRST_WAIT; + pmp_deadline = ata_deadline(jiffies, + ATA_TMOUT_PMP_SRST_WAIT); if (time_after(pmp_deadline, deadline)) pmp_deadline = deadline; ata_wait_ready(link, pmp_deadline, check_ready); @@ -6073,8 +6084,6 @@ static void __init ata_parse_force_param(void) static int __init ata_init(void) { - ata_probe_timeout *= HZ; - ata_parse_force_param(); ata_wq = create_workqueue("ata"); @@ -6127,8 +6136,8 @@ int ata_ratelimit(void) * @reg: IO-mapped register * @mask: Mask to apply to read register value * @val: Wait condition - * @interval_msec: polling interval in milliseconds - * @timeout_msec: timeout in milliseconds + * @interval: polling interval in milliseconds + * @timeout: timeout in milliseconds * * Waiting for some bits of register to change is a common * operation for ATA controllers. This function reads 32bit LE @@ -6146,10 +6155,9 @@ int ata_ratelimit(void) * The final register value. */ u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, - unsigned long interval_msec, - unsigned long timeout_msec) + unsigned long interval, unsigned long timeout) { - unsigned long timeout; + unsigned long deadline; u32 tmp; tmp = ioread32(reg); @@ -6158,10 +6166,10 @@ u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, * preceding writes reach the controller before starting to * eat away the timeout. */ - timeout = jiffies + (timeout_msec * HZ) / 1000; + deadline = ata_deadline(jiffies, timeout); - while ((tmp & mask) == val && time_before(jiffies, timeout)) { - msleep(interval_msec); + while ((tmp & mask) == val && time_before(jiffies, deadline)) { + msleep(interval); tmp = ioread32(reg); } diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 7894d83ea1eb..58bdc538d229 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -66,15 +66,19 @@ enum { ATA_ECAT_DUBIOUS_TOUT_HSM = 6, ATA_ECAT_DUBIOUS_UNK_DEV = 7, ATA_ECAT_NR = 8, -}; -/* Waiting in ->prereset can never be reliable. It's sometimes nice - * to wait there but it can't be depended upon; otherwise, we wouldn't - * be resetting. Just give it enough time for most drives to spin up. - */ -enum { - ATA_EH_PRERESET_TIMEOUT = 10 * HZ, - ATA_EH_FASTDRAIN_INTERVAL = 3 * HZ, + ATA_EH_CMD_DFL_TIMEOUT = 5000, + + /* always put at least this amount of time between resets */ + ATA_EH_RESET_COOL_DOWN = 5000, + + /* Waiting in ->prereset can never be reliable. It's + * sometimes nice to wait there but it can't be depended upon; + * otherwise, we wouldn't be resetting. Just give it enough + * time for most drives to spin up. + */ + ATA_EH_PRERESET_TIMEOUT = 10000, + ATA_EH_FASTDRAIN_INTERVAL = 3000, }; /* The following table determines how we sequence resets. Each entry @@ -84,13 +88,60 @@ enum { * are mostly for error handling, hotplug and retarded devices. */ static const unsigned long ata_eh_reset_timeouts[] = { - 10 * HZ, /* most drives spin up by 10sec */ - 10 * HZ, /* > 99% working drives spin up before 20sec */ - 35 * HZ, /* give > 30 secs of idleness for retarded devices */ - 5 * HZ, /* and sweet one last chance */ - /* > 1 min has elapsed, give up */ + 10000, /* most drives spin up by 10sec */ + 10000, /* > 99% working drives spin up before 20sec */ + 35000, /* give > 30 secs of idleness for retarded devices */ + 5000, /* and sweet one last chance */ + ULONG_MAX, /* > 1 min has elapsed, give up */ }; +static const unsigned long ata_eh_identify_timeouts[] = { + 5000, /* covers > 99% of successes and not too boring on failures */ + 10000, /* combined time till here is enough even for media access */ + 30000, /* for true idiots */ + ULONG_MAX, +}; + +static const unsigned long ata_eh_other_timeouts[] = { + 5000, /* same rationale as identify timeout */ + 10000, /* ditto */ + /* but no merciful 30sec for other commands, it just isn't worth it */ + ULONG_MAX, +}; + +struct ata_eh_cmd_timeout_ent { + const u8 *commands; + const unsigned long *timeouts; +}; + +/* The following table determines timeouts to use for EH internal + * commands. Each table entry is a command class and matches the + * commands the entry applies to and the timeout table to use. + * + * On the retry after a command timed out, the next timeout value from + * the table is used. If the table doesn't contain further entries, + * the last value is used. + * + * ehc->cmd_timeout_idx keeps track of which timeout to use per + * command class, so if SET_FEATURES times out on the first try, the + * next try will use the second timeout value only for that class. + */ +#define CMDS(cmds...) (const u8 []){ cmds, 0 } +static const struct ata_eh_cmd_timeout_ent +ata_eh_cmd_timeout_table[ATA_EH_CMD_TIMEOUT_TABLE_SIZE] = { + { .commands = CMDS(ATA_CMD_ID_ATA, ATA_CMD_ID_ATAPI), + .timeouts = ata_eh_identify_timeouts, }, + { .commands = CMDS(ATA_CMD_READ_NATIVE_MAX, ATA_CMD_READ_NATIVE_MAX_EXT), + .timeouts = ata_eh_other_timeouts, }, + { .commands = CMDS(ATA_CMD_SET_MAX, ATA_CMD_SET_MAX_EXT), + .timeouts = ata_eh_other_timeouts, }, + { .commands = CMDS(ATA_CMD_SET_FEATURES), + .timeouts = ata_eh_other_timeouts, }, + { .commands = CMDS(ATA_CMD_INIT_DEV_PARAMS), + .timeouts = ata_eh_other_timeouts, }, +}; +#undef CMDS + static void __ata_port_freeze(struct ata_port *ap); #ifdef CONFIG_PM static void ata_eh_handle_port_suspend(struct ata_port *ap); @@ -236,6 +287,73 @@ void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset, #endif /* CONFIG_PCI */ +static int ata_lookup_timeout_table(u8 cmd) +{ + int i; + + for (i = 0; i < ATA_EH_CMD_TIMEOUT_TABLE_SIZE; i++) { + const u8 *cur; + + for (cur = ata_eh_cmd_timeout_table[i].commands; *cur; cur++) + if (*cur == cmd) + return i; + } + + return -1; +} + +/** + * ata_internal_cmd_timeout - determine timeout for an internal command + * @dev: target device + * @cmd: internal command to be issued + * + * Determine timeout for internal command @cmd for @dev. + * + * LOCKING: + * EH context. + * + * RETURNS: + * Determined timeout. + */ +unsigned long ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd) +{ + struct ata_eh_context *ehc = &dev->link->eh_context; + int ent = ata_lookup_timeout_table(cmd); + int idx; + + if (ent < 0) + return ATA_EH_CMD_DFL_TIMEOUT; + + idx = ehc->cmd_timeout_idx[dev->devno][ent]; + return ata_eh_cmd_timeout_table[ent].timeouts[idx]; +} + +/** + * ata_internal_cmd_timed_out - notification for internal command timeout + * @dev: target device + * @cmd: internal command which timed out + * + * Notify EH that internal command @cmd for @dev timed out. This + * function should be called only for commands whose timeouts are + * determined using ata_internal_cmd_timeout(). + * + * LOCKING: + * EH context. + */ +void ata_internal_cmd_timed_out(struct ata_device *dev, u8 cmd) +{ + struct ata_eh_context *ehc = &dev->link->eh_context; + int ent = ata_lookup_timeout_table(cmd); + int idx; + + if (ent < 0) + return; + + idx = ehc->cmd_timeout_idx[dev->devno][ent]; + if (ata_eh_cmd_timeout_table[ent].timeouts[idx + 1] != ULONG_MAX) + ehc->cmd_timeout_idx[dev->devno][ent]++; +} + static void ata_ering_record(struct ata_ering *ering, unsigned int eflags, unsigned int err_mask) { @@ -486,6 +604,9 @@ void ata_scsi_error(struct Scsi_Host *host) if (ata_ncq_enabled(dev)) ehc->saved_ncq_enabled |= 1 << devno; } + + /* set last reset timestamp to some time in the past */ + ehc->last_reset = jiffies - 60 * HZ; } ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS; @@ -641,7 +762,7 @@ void ata_eh_fastdrain_timerfn(unsigned long arg) /* some qcs have finished, give it another chance */ ap->fastdrain_cnt = cnt; ap->fastdrain_timer.expires = - jiffies + ATA_EH_FASTDRAIN_INTERVAL; + ata_deadline(jiffies, ATA_EH_FASTDRAIN_INTERVAL); add_timer(&ap->fastdrain_timer); } @@ -681,7 +802,8 @@ static void ata_eh_set_pending(struct ata_port *ap, int fastdrain) /* activate fast drain */ ap->fastdrain_cnt = cnt; - ap->fastdrain_timer.expires = jiffies + ATA_EH_FASTDRAIN_INTERVAL; + ap->fastdrain_timer.expires = + ata_deadline(jiffies, ATA_EH_FASTDRAIN_INTERVAL); add_timer(&ap->fastdrain_timer); } @@ -1238,6 +1360,7 @@ static int ata_eh_read_log_10h(struct ata_device *dev, * atapi_eh_request_sense - perform ATAPI REQUEST_SENSE * @dev: device to perform REQUEST_SENSE to * @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long) + * @dfl_sense_key: default sense key to use * * Perform ATAPI REQUEST_SENSE after the device reported CHECK * SENSE. This function is EH helper. @@ -1248,13 +1371,13 @@ static int ata_eh_read_log_10h(struct ata_device *dev, * RETURNS: * 0 on success, AC_ERR_* mask on failure */ -static unsigned int atapi_eh_request_sense(struct ata_queued_cmd *qc) +static unsigned int atapi_eh_request_sense(struct ata_device *dev, + u8 *sense_buf, u8 dfl_sense_key) { - struct ata_device *dev = qc->dev; - unsigned char *sense_buf = qc->scsicmd->sense_buffer; + u8 cdb[ATAPI_CDB_LEN] = + { REQUEST_SENSE, 0, 0, 0, SCSI_SENSE_BUFFERSIZE, 0 }; struct ata_port *ap = dev->link->ap; struct ata_taskfile tf; - u8 cdb[ATAPI_CDB_LEN]; DPRINTK("ATAPI request sense\n"); @@ -1265,15 +1388,11 @@ static unsigned int atapi_eh_request_sense(struct ata_queued_cmd *qc) * for the case where they are -not- overwritten */ sense_buf[0] = 0x70; - sense_buf[2] = qc->result_tf.feature >> 4; + sense_buf[2] = dfl_sense_key; /* some devices time out if garbage left in tf */ ata_tf_init(dev, &tf); - memset(cdb, 0, ATAPI_CDB_LEN); - cdb[0] = REQUEST_SENSE; - cdb[4] = SCSI_SENSE_BUFFERSIZE; - tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf.command = ATA_CMD_PACKET; @@ -1445,7 +1564,9 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc, case ATA_DEV_ATAPI: if (!(qc->ap->pflags & ATA_PFLAG_FROZEN)) { - tmp = atapi_eh_request_sense(qc); + tmp = atapi_eh_request_sense(qc->dev, + qc->scsicmd->sense_buffer, + qc->result_tf.feature >> 4); if (!tmp) { /* ATA_QCFLAG_SENSE_VALID is used to * tell atapi_qc_complete() that sense @@ -2071,13 +2192,12 @@ int ata_eh_reset(struct ata_link *link, int classify, ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) { - const int max_tries = ARRAY_SIZE(ata_eh_reset_timeouts); struct ata_port *ap = link->ap; struct ata_eh_context *ehc = &link->eh_context; unsigned int *classes = ehc->classes; unsigned int lflags = link->flags; int verbose = !(ehc->i.flags & ATA_EHI_QUIET); - int try = 0; + int max_tries = 0, try = 0; struct ata_device *dev; unsigned long deadline, now; ata_reset_fn_t reset; @@ -2088,11 +2208,20 @@ int ata_eh_reset(struct ata_link *link, int classify, /* * Prepare to reset */ + while (ata_eh_reset_timeouts[max_tries] != ULONG_MAX) + max_tries++; + + now = jiffies; + deadline = ata_deadline(ehc->last_reset, ATA_EH_RESET_COOL_DOWN); + if (time_before(now, deadline)) + schedule_timeout_uninterruptible(deadline - now); + spin_lock_irqsave(ap->lock, flags); ap->pflags |= ATA_PFLAG_RESETTING; spin_unlock_irqrestore(ap->lock, flags); ata_eh_about_to_do(link, NULL, ATA_EH_RESET); + ehc->last_reset = jiffies; ata_link_for_each_dev(dev, link) { /* If we issue an SRST then an ATA drive (not ATAPI) @@ -2125,7 +2254,8 @@ int ata_eh_reset(struct ata_link *link, int classify, } if (prereset) { - rc = prereset(link, jiffies + ATA_EH_PRERESET_TIMEOUT); + rc = prereset(link, + ata_deadline(jiffies, ATA_EH_PRERESET_TIMEOUT)); if (rc) { if (rc == -ENOENT) { ata_link_printk(link, KERN_DEBUG, @@ -2157,10 +2287,11 @@ int ata_eh_reset(struct ata_link *link, int classify, /* * Perform reset */ + ehc->last_reset = jiffies; if (ata_is_host_link(link)) ata_eh_freeze_port(ap); - deadline = jiffies + ata_eh_reset_timeouts[try++]; + deadline = ata_deadline(jiffies, ata_eh_reset_timeouts[try++]); if (reset) { if (verbose) @@ -2277,6 +2408,7 @@ int ata_eh_reset(struct ata_link *link, int classify, /* reset successful, schedule revalidation */ ata_eh_done(link, NULL, ATA_EH_RESET); + ehc->last_reset = jiffies; ehc->i.action |= ATA_EH_REVALIDATE; rc = 0; @@ -2303,9 +2435,9 @@ int ata_eh_reset(struct ata_link *link, int classify, if (time_before(now, deadline)) { unsigned long delta = deadline - now; - ata_link_printk(link, KERN_WARNING, "reset failed " - "(errno=%d), retrying in %u secs\n", - rc, (jiffies_to_msecs(delta) + 999) / 1000); + ata_link_printk(link, KERN_WARNING, + "reset failed (errno=%d), retrying in %u secs\n", + rc, DIV_ROUND_UP(jiffies_to_msecs(delta), 1000)); while (delta) delta = schedule_timeout_uninterruptible(delta); @@ -2583,8 +2715,11 @@ static int ata_eh_handle_dev_fail(struct ata_device *dev, int err) ata_eh_detach_dev(dev); /* schedule probe if necessary */ - if (ata_eh_schedule_probe(dev)) + if (ata_eh_schedule_probe(dev)) { ehc->tries[dev->devno] = ATA_EH_DEV_TRIES; + memset(ehc->cmd_timeout_idx[dev->devno], 0, + sizeof(ehc->cmd_timeout_idx[dev->devno])); + } return 1; } else { @@ -2622,7 +2757,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, { struct ata_link *link; struct ata_device *dev; - int nr_failed_devs, nr_disabled_devs; + int nr_failed_devs; int rc; unsigned long flags; @@ -2665,7 +2800,6 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, retry: rc = 0; nr_failed_devs = 0; - nr_disabled_devs = 0; /* if UNLOADING, finish immediately */ if (ap->pflags & ATA_PFLAG_UNLOADING) @@ -2732,8 +2866,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, dev_fail: nr_failed_devs++; - if (ata_eh_handle_dev_fail(dev, rc)) - nr_disabled_devs++; + ata_eh_handle_dev_fail(dev, rc); if (ap->pflags & ATA_PFLAG_FROZEN) { /* PMP reset requires working host port. @@ -2745,18 +2878,8 @@ dev_fail: } } - if (nr_failed_devs) { - if (nr_failed_devs != nr_disabled_devs) { - ata_port_printk(ap, KERN_WARNING, "failed to recover " - "some devices, retrying in 5 secs\n"); - ssleep(5); - } else { - /* no device left to recover, repeat fast */ - msleep(500); - } - + if (nr_failed_devs) goto retry; - } out: if (rc && r_failed_link) diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index 7daf4c0f6216..b65db309c181 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -727,19 +727,12 @@ static int sata_pmp_eh_recover_pmp(struct ata_port *ap, } if (tries) { - int sleep = ehc->i.flags & ATA_EHI_DID_RESET; - /* consecutive revalidation failures? speed down */ if (reval_failed) sata_down_spd_limit(link); else reval_failed = 1; - ata_dev_printk(dev, KERN_WARNING, - "retrying reset%s\n", - sleep ? " in 5 secs" : ""); - if (sleep) - ssleep(5); ehc->i.action |= ATA_EH_RESET; goto retry; } else { @@ -785,7 +778,8 @@ static int sata_pmp_eh_handle_disabled_links(struct ata_port *ap) * SError.N working. */ sata_link_hardreset(link, sata_deb_timing_normal, - jiffies + ATA_TMOUT_INTERNAL_QUICK, NULL, NULL); + ata_deadline(jiffies, ATA_TMOUT_INTERNAL_QUICK), + NULL, NULL); /* unconditionally clear SError.N */ rc = sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG); @@ -990,10 +984,7 @@ static int sata_pmp_eh_recover(struct ata_port *ap) goto retry; if (--pmp_tries) { - ata_port_printk(ap, KERN_WARNING, - "failed to recover PMP, retrying in 5 secs\n"); pmp_ehc->i.action |= ATA_EH_RESET; - ssleep(5); goto retry; } diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 499ccc628d81..f3b4b15a8dc4 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -190,6 +190,85 @@ static void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq) scsi_build_sense_buffer(0, cmd->sense_buffer, sk, asc, ascq); } +static ssize_t +ata_scsi_em_message_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct ata_port *ap = ata_shost_to_port(shost); + if (ap->ops->em_store && (ap->flags & ATA_FLAG_EM)) + return ap->ops->em_store(ap, buf, count); + return -EINVAL; +} + +static ssize_t +ata_scsi_em_message_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct ata_port *ap = ata_shost_to_port(shost); + + if (ap->ops->em_show && (ap->flags & ATA_FLAG_EM)) + return ap->ops->em_show(ap, buf); + return -EINVAL; +} +DEVICE_ATTR(em_message, S_IRUGO | S_IWUGO, + ata_scsi_em_message_show, ata_scsi_em_message_store); +EXPORT_SYMBOL_GPL(dev_attr_em_message); + +static ssize_t +ata_scsi_em_message_type_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct ata_port *ap = ata_shost_to_port(shost); + + return snprintf(buf, 23, "%d\n", ap->em_message_type); +} +DEVICE_ATTR(em_message_type, S_IRUGO, + ata_scsi_em_message_type_show, NULL); +EXPORT_SYMBOL_GPL(dev_attr_em_message_type); + +static ssize_t +ata_scsi_activity_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct ata_device *atadev = ata_scsi_find_dev(ap, sdev); + + if (ap->ops->sw_activity_show && (ap->flags & ATA_FLAG_SW_ACTIVITY)) + return ap->ops->sw_activity_show(atadev, buf); + return -EINVAL; +} + +static ssize_t +ata_scsi_activity_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct ata_device *atadev = ata_scsi_find_dev(ap, sdev); + enum sw_activity val; + int rc; + + if (ap->ops->sw_activity_store && (ap->flags & ATA_FLAG_SW_ACTIVITY)) { + val = simple_strtoul(buf, NULL, 0); + switch (val) { + case OFF: case BLINK_ON: case BLINK_OFF: + rc = ap->ops->sw_activity_store(atadev, val); + if (!rc) + return count; + else + return rc; + } + } + return -EINVAL; +} +DEVICE_ATTR(sw_activity, S_IWUGO | S_IRUGO, ata_scsi_activity_show, + ata_scsi_activity_store); +EXPORT_SYMBOL_GPL(dev_attr_sw_activity); + static void ata_scsi_invalid_field(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) { @@ -1779,7 +1858,9 @@ static unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf) const u8 pages[] = { 0x00, /* page 0x00, this page */ 0x80, /* page 0x80, unit serial no page */ - 0x83 /* page 0x83, device ident page */ + 0x83, /* page 0x83, device ident page */ + 0x89, /* page 0x89, ata info page */ + 0xb1, /* page 0xb1, block device characteristics page */ }; rbuf[3] = sizeof(pages); /* number of supported VPD pages */ @@ -1900,6 +1981,19 @@ static unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf) return 0; } +static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf) +{ + rbuf[1] = 0xb1; + rbuf[3] = 0x3c; + if (ata_id_major_version(args->id) > 7) { + rbuf[4] = args->id[217] >> 8; + rbuf[5] = args->id[217]; + rbuf[7] = args->id[168] & 0xf; + } + + return 0; +} + /** * ata_scsiop_noop - Command handler that simply returns success. * @args: device IDENTIFY data / SCSI command of interest. @@ -2921,6 +3015,9 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, case 0x89: ata_scsi_rbuf_fill(&args, ata_scsiop_inq_89); break; + case 0xb1: + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b1); + break; default: ata_scsi_invalid_field(cmd, done); break; diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index c0908c225483..304fdc6f1dc2 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -345,8 +345,8 @@ void ata_sff_dma_pause(struct ata_port *ap) /** * ata_sff_busy_sleep - sleep until BSY clears, or timeout * @ap: port containing status register to be polled - * @tmout_pat: impatience timeout - * @tmout: overall timeout + * @tmout_pat: impatience timeout in msecs + * @tmout: overall timeout in msecs * * Sleep until ATA Status register bit BSY clears, * or a timeout occurs. @@ -365,7 +365,7 @@ int ata_sff_busy_sleep(struct ata_port *ap, status = ata_sff_busy_wait(ap, ATA_BUSY, 300); timer_start = jiffies; - timeout = timer_start + tmout_pat; + timeout = ata_deadline(timer_start, tmout_pat); while (status != 0xff && (status & ATA_BUSY) && time_before(jiffies, timeout)) { msleep(50); @@ -377,7 +377,7 @@ int ata_sff_busy_sleep(struct ata_port *ap, "port is slow to respond, please be patient " "(Status 0x%x)\n", status); - timeout = timer_start + tmout; + timeout = ata_deadline(timer_start, tmout); while (status != 0xff && (status & ATA_BUSY) && time_before(jiffies, timeout)) { msleep(50); @@ -390,7 +390,7 @@ int ata_sff_busy_sleep(struct ata_port *ap, if (status & ATA_BUSY) { ata_port_printk(ap, KERN_ERR, "port failed to respond " "(%lu secs, Status 0x%x)\n", - tmout / HZ, status); + DIV_ROUND_UP(tmout, 1000), status); return -EBUSY; } @@ -1888,7 +1888,7 @@ int ata_sff_wait_after_reset(struct ata_link *link, unsigned int devmask, unsigned int dev1 = devmask & (1 << 1); int rc, ret = 0; - msleep(ATA_WAIT_AFTER_RESET_MSECS); + msleep(ATA_WAIT_AFTER_RESET); /* always check readiness of the master device */ rc = ata_sff_wait_ready(link, deadline); @@ -2371,7 +2371,8 @@ void ata_bus_reset(struct ata_port *ap) /* issue bus reset */ if (ap->flags & ATA_FLAG_SRST) { - rc = ata_bus_softreset(ap, devmask, jiffies + 40 * HZ); + rc = ata_bus_softreset(ap, devmask, + ata_deadline(jiffies, 40000)); if (rc && rc != -ENODEV) goto err_out; } diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 1cf803adbc95..f6f9c28ec7f8 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -151,6 +151,8 @@ extern void ata_scsi_dev_rescan(struct work_struct *work); extern int ata_bus_probe(struct ata_port *ap); /* libata-eh.c */ +extern unsigned long ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd); +extern void ata_internal_cmd_timed_out(struct ata_device *dev, u8 cmd); extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); extern void ata_scsi_error(struct Scsi_Host *host); extern void ata_port_wait_eh(struct ata_port *ap); diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index 55516103626a..d3932901a3b3 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -1011,7 +1011,7 @@ static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask) void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; unsigned int dev0 = devmask & (1 << 0); unsigned int dev1 = devmask & (1 << 1); - unsigned long timeout; + unsigned long deadline; /* if device 0 was found in ata_devchk, wait for its * BSY bit to clear @@ -1022,7 +1022,7 @@ static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask) /* if device 1 was found in ata_devchk, wait for * register access, then wait for BSY to clear */ - timeout = jiffies + ATA_TMOUT_BOOT; + deadline = ata_deadline(jiffies, ATA_TMOUT_BOOT); while (dev1) { u8 nsect, lbal; @@ -1031,7 +1031,7 @@ static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask) lbal = read_atapi_register(base, ATA_REG_LBAL); if ((nsect == 1) && (lbal == 1)) break; - if (time_after(jiffies, timeout)) { + if (time_after(jiffies, deadline)) { dev1 = 0; break; } diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index fe7cc8ed4ea4..bc037ffce200 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -305,7 +305,7 @@ static unsigned int pdc_data_xfer_vlb(struct ata_device *dev, iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); if (unlikely(slop)) { - u32 pad; + __le32 pad; if (rw == READ) { pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); memcpy(buf + buflen - slop, &pad, slop); @@ -746,14 +746,12 @@ static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf, ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); if (unlikely(slop)) { - u32 pad; + __le32 pad; if (rw == WRITE) { memcpy(&pad, buf + buflen - slop, slop); - pad = le32_to_cpu(pad); - iowrite32(pad, ap->ioaddr.data_addr); + iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); } else { - pad = ioread32(ap->ioaddr.data_addr); - pad = cpu_to_le32(pad); + pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); memcpy(buf + buflen - slop, &pad, slop); } } diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c index 97e5b090d7c2..63b7a1c165a5 100644 --- a/drivers/ata/pata_qdi.c +++ b/drivers/ata/pata_qdi.c @@ -137,7 +137,7 @@ static unsigned int qdi_data_xfer(struct ata_device *dev, unsigned char *buf, iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); if (unlikely(slop)) { - u32 pad; + __le32 pad; if (rw == READ) { pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); memcpy(buf + buflen - slop, &pad, slop); diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index bbf5aa345e68..16673d168573 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -696,7 +696,7 @@ static void scc_bmdma_stop (struct ata_queued_cmd *qc) if (reg & INTSTS_BMSINT) { unsigned int classes; - unsigned long deadline = jiffies + ATA_TMOUT_BOOT; + unsigned long deadline = ata_deadline(jiffies, ATA_TMOUT_BOOT); printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME); out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT); /* TBD: SW reset */ diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c index 474528f8fe3d..a7606b044a61 100644 --- a/drivers/ata/pata_winbond.c +++ b/drivers/ata/pata_winbond.c @@ -105,7 +105,7 @@ static unsigned int winbond_data_xfer(struct ata_device *dev, iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); if (unlikely(slop)) { - u32 pad; + __le32 pad; if (rw == READ) { pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); memcpy(buf + buflen - slop, &pad, slop); diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index 16aa6839aa5a..fb13b82aacba 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -253,21 +253,29 @@ static void k2_bmdma_start_mmio(struct ata_queued_cmd *qc) /* start host DMA transaction */ dmactl = readb(mmio + ATA_DMA_CMD); writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD); - /* There is a race condition in certain SATA controllers that can - be seen when the r/w command is given to the controller before the - host DMA is started. On a Read command, the controller would initiate - the command to the drive even before it sees the DMA start. When there - are very fast drives connected to the controller, or when the data request - hits in the drive cache, there is the possibility that the drive returns a part - or all of the requested data to the controller before the DMA start is issued. - In this case, the controller would become confused as to what to do with the data. - In the worst case when all the data is returned back to the controller, the - controller could hang. In other cases it could return partial data returning - in data corruption. This problem has been seen in PPC systems and can also appear - on an system with very fast disks, where the SATA controller is sitting behind a - number of bridges, and hence there is significant latency between the r/w command - and the start command. */ - /* issue r/w command if the access is to ATA*/ + /* This works around possible data corruption. + + On certain SATA controllers that can be seen when the r/w + command is given to the controller before the host DMA is + started. + + On a Read command, the controller would initiate the + command to the drive even before it sees the DMA + start. When there are very fast drives connected to the + controller, or when the data request hits in the drive + cache, there is the possibility that the drive returns a + part or all of the requested data to the controller before + the DMA start is issued. In this case, the controller + would become confused as to what to do with the data. In + the worst case when all the data is returned back to the + controller, the controller could hang. In other cases it + could return partial data returning in data + corruption. This problem has been seen in PPC systems and + can also appear on an system with very fast disks, where + the SATA controller is sitting behind a number of bridges, + and hence there is significant latency between the r/w + command and the start command. */ + /* issue r/w command if the access is to ATA */ if (qc->tf.protocol == ATA_PROT_DMA) ap->ops->sff_exec_command(ap, &qc->tf); } diff --git a/include/linux/libata.h b/include/linux/libata.h index e57e5d08312d..5b247b8a6b3b 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -27,6 +27,7 @@ #define __LINUX_LIBATA_H__ #include +#include #include #include #include @@ -115,7 +116,7 @@ enum { /* tag ATA_MAX_QUEUE - 1 is reserved for internal commands */ ATA_MAX_QUEUE = 32, ATA_TAG_INTERNAL = ATA_MAX_QUEUE - 1, - ATA_SHORT_PAUSE = (HZ >> 6) + 1, + ATA_SHORT_PAUSE = 16, ATAPI_MAX_DRAIN = 16 << 10, @@ -168,6 +169,7 @@ enum { ATA_LFLAG_ASSUME_CLASS = ATA_LFLAG_ASSUME_ATA | ATA_LFLAG_ASSUME_SEMB, ATA_LFLAG_NO_RETRY = (1 << 5), /* don't retry this link */ ATA_LFLAG_DISABLED = (1 << 6), /* link is disabled */ + ATA_LFLAG_SW_ACTIVITY = (1 << 7), /* keep activity stats */ /* struct ata_port flags */ ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */ @@ -190,6 +192,10 @@ enum { ATA_FLAG_AN = (1 << 18), /* controller supports AN */ ATA_FLAG_PMP = (1 << 19), /* controller supports PMP */ ATA_FLAG_IPM = (1 << 20), /* driver can handle IPM */ + ATA_FLAG_EM = (1 << 21), /* driver supports enclosure + * management */ + ATA_FLAG_SW_ACTIVITY = (1 << 22), /* driver supports sw activity + * led */ /* The following flag belongs to ap->pflags but is kept in * ap->flags because it's referenced in many LLDs and will be @@ -234,17 +240,16 @@ enum { /* bits 24:31 of host->flags are reserved for LLD specific flags */ /* various lengths of time */ - ATA_TMOUT_BOOT = 30 * HZ, /* heuristic */ - ATA_TMOUT_BOOT_QUICK = 7 * HZ, /* heuristic */ - ATA_TMOUT_INTERNAL = 30 * HZ, - ATA_TMOUT_INTERNAL_QUICK = 5 * HZ, + ATA_TMOUT_BOOT = 30000, /* heuristic */ + ATA_TMOUT_BOOT_QUICK = 7000, /* heuristic */ + ATA_TMOUT_INTERNAL_QUICK = 5000, /* FIXME: GoVault needs 2s but we can't afford that without * parallel probing. 800ms is enough for iVDR disk * HHD424020F7SV00. Increase to 2secs when parallel probing * is in place. */ - ATA_TMOUT_FF_WAIT = 4 * HZ / 5, + ATA_TMOUT_FF_WAIT = 800, /* Spec mandates to wait for ">= 2ms" before checking status * after reset. We wait 150ms, because that was the magic @@ -256,14 +261,14 @@ enum { * * Old drivers/ide uses the 2mS rule and then waits for ready. */ - ATA_WAIT_AFTER_RESET_MSECS = 150, + ATA_WAIT_AFTER_RESET = 150, /* If PMP is supported, we have to do follow-up SRST. As some * PMPs don't send D2H Reg FIS after hardreset, LLDs are * advised to wait only for the following duration before * doing SRST. */ - ATA_TMOUT_PMP_SRST_WAIT = 1 * HZ, + ATA_TMOUT_PMP_SRST_WAIT = 1000, /* ATA bus states */ BUS_UNKNOWN = 0, @@ -340,6 +345,11 @@ enum { SATA_PMP_RW_TIMEOUT = 3000, /* PMP read/write timeout */ + /* This should match the actual table size of + * ata_eh_cmd_timeout_table in libata-eh.c. + */ + ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 5, + /* Horkage types. May be set by libata or controller on drives (some horkage may be drive/controller pair dependant */ @@ -441,6 +451,15 @@ enum link_pm { MEDIUM_POWER, }; extern struct device_attribute dev_attr_link_power_management_policy; +extern struct device_attribute dev_attr_em_message_type; +extern struct device_attribute dev_attr_em_message; +extern struct device_attribute dev_attr_sw_activity; + +enum sw_activity { + OFF, + BLINK_ON, + BLINK_OFF, +}; #ifdef CONFIG_ATA_SFF struct ata_ioports { @@ -597,10 +616,14 @@ struct ata_eh_info { struct ata_eh_context { struct ata_eh_info i; int tries[ATA_MAX_DEVICES]; + int cmd_timeout_idx[ATA_MAX_DEVICES] + [ATA_EH_CMD_TIMEOUT_TABLE_SIZE]; unsigned int classes[ATA_MAX_DEVICES]; unsigned int did_probe_mask; unsigned int saved_ncq_enabled; u8 saved_xfer_mode[ATA_MAX_DEVICES]; + /* timestamp for the last reset attempt or success */ + unsigned long last_reset; }; struct ata_acpi_drive @@ -692,6 +715,7 @@ struct ata_port { struct timer_list fastdrain_timer; unsigned long fastdrain_cnt; + int em_message_type; void *private_data; #ifdef CONFIG_ATA_ACPI @@ -783,6 +807,12 @@ struct ata_port_operations { u8 (*bmdma_status)(struct ata_port *ap); #endif /* CONFIG_ATA_SFF */ + ssize_t (*em_show)(struct ata_port *ap, char *buf); + ssize_t (*em_store)(struct ata_port *ap, const char *message, + size_t size); + ssize_t (*sw_activity_show)(struct ata_device *dev, char *buf); + ssize_t (*sw_activity_store)(struct ata_device *dev, + enum sw_activity val); /* * Obsolete */ @@ -895,8 +925,7 @@ extern void ata_host_resume(struct ata_host *host); #endif extern int ata_ratelimit(void); extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, - unsigned long interval_msec, - unsigned long timeout_msec); + unsigned long interval, unsigned long timeout); extern int atapi_cmd_type(u8 opcode); extern void ata_tf_to_fis(const struct ata_taskfile *tf, u8 pmp, int is_cmd, u8 *fis); @@ -1389,6 +1418,12 @@ static inline int ata_check_ready(u8 status) return 0; } +static inline unsigned long ata_deadline(unsigned long from_jiffies, + unsigned long timeout_msecs) +{ + return from_jiffies + msecs_to_jiffies(timeout_msecs); +} + /************************************************************************** * PMP - drivers/ata/libata-pmp.c