ARM: dts: sun6i: Add sun6i-reference-design-tablet.dtsi
Just like with a13/a23/a33 most a31 tablets are derived from the same reference design. Add a .dtsi file with all the common bits to avoid endless copy and pasting of these. The sun6i-reference-design-tablet.dtsi this commit adds is a copy of sun6i-a31s-colorfly-e708-q1.dts with a few tablet specific bits removed / left in sun6i-a31s-colorfly-e708-q1.dts. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This commit is contained in:
parent
a343dfdd96
commit
b32aea8514
|
@ -42,32 +42,11 @@
|
|||
|
||||
/dts-v1/;
|
||||
#include "sun6i-a31s.dtsi"
|
||||
#include "sunxi-common-regulators.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/pinctrl/sun4i-a10.h>
|
||||
#include "sun6i-reference-design-tablet.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Colorfly E708 Q1 tablet";
|
||||
compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <®_dcdc3>;
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
/* rtl8188etv wifi is connected here */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&lradc {
|
||||
|
@ -82,136 +61,12 @@
|
|||
};
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
|
||||
vmmc-supply = <®_dcdc1>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
|
||||
cd-inverted;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pio {
|
||||
mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
|
||||
allwinner,pins = "PA8";
|
||||
allwinner,function = "gpio_in";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
||||
};
|
||||
|
||||
usb0_id_detect_pin: usb0_id_detect_pin@0 {
|
||||
allwinner,pins = "PA15";
|
||||
allwinner,function = "gpio_in";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
||||
};
|
||||
};
|
||||
|
||||
&p2wi {
|
||||
status = "okay";
|
||||
|
||||
axp22x: pmic@68 {
|
||||
compatible = "x-powers,axp221";
|
||||
reg = <0x68>;
|
||||
interrupt-parent = <&nmi_intc>;
|
||||
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
||||
drivevbus-supply = <®_vcc5v0>;
|
||||
x-powers,drive-vbus-en;
|
||||
};
|
||||
};
|
||||
|
||||
#include "axp22x.dtsi"
|
||||
|
||||
®_aldo3 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "avcc";
|
||||
};
|
||||
|
||||
®_dc1sw {
|
||||
regulator-name = "vcc-lcd";
|
||||
};
|
||||
|
||||
®_dc5ldo {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1320000>;
|
||||
regulator-name = "vdd-cpus"; /* This is an educated guess */
|
||||
};
|
||||
|
||||
®_dcdc1 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-name = "vcc-3v0";
|
||||
};
|
||||
|
||||
®_dcdc2 {
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1320000>;
|
||||
regulator-name = "vdd-gpu";
|
||||
};
|
||||
|
||||
®_dcdc3 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1320000>;
|
||||
regulator-name = "vdd-cpu";
|
||||
};
|
||||
|
||||
®_dcdc4 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1320000>;
|
||||
regulator-name = "vdd-sys-dll";
|
||||
};
|
||||
|
||||
®_dcdc5 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-name = "vcc-dram";
|
||||
};
|
||||
|
||||
®_dldo1 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-wifi";
|
||||
};
|
||||
|
||||
®_dldo2 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc-pg";
|
||||
};
|
||||
|
||||
®_drivevbus {
|
||||
regulator-name = "usb0-vbus";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&simplefb_lcd {
|
||||
vcc-lcd-supply = <®_dc1sw>;
|
||||
vcc-pg-supply = <®_dldo2>;
|
||||
};
|
||||
|
||||
&usb_otg {
|
||||
dr_mode = "otg";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_power_supply {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb0_id_detect_pin>;
|
||||
usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
|
||||
usb0_vbus_power-supply = <&usb_power_supply>;
|
||||
usb0_vbus-supply = <®_drivevbus>;
|
||||
usb1_vbus-supply = <®_dldo1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
193
arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
Normal file
193
arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
Normal file
|
@ -0,0 +1,193 @@
|
|||
/*
|
||||
* Copyright 2016 Hans de Goede <hdegoede@redhat.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include "sunxi-common-regulators.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/pinctrl/sun4i-a10.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <®_dcdc3>;
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
/* Wifi is connected here */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
|
||||
vmmc-supply = <®_dcdc1>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
|
||||
cd-inverted;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pio {
|
||||
mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
|
||||
allwinner,pins = "PA8";
|
||||
allwinner,function = "gpio_in";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
||||
};
|
||||
|
||||
usb0_id_detect_pin: usb0_id_detect_pin@0 {
|
||||
allwinner,pins = "PA15";
|
||||
allwinner,function = "gpio_in";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
||||
};
|
||||
};
|
||||
|
||||
&p2wi {
|
||||
status = "okay";
|
||||
|
||||
axp22x: pmic@68 {
|
||||
compatible = "x-powers,axp221";
|
||||
reg = <0x68>;
|
||||
interrupt-parent = <&nmi_intc>;
|
||||
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
||||
drivevbus-supply = <®_vcc5v0>;
|
||||
x-powers,drive-vbus-en;
|
||||
};
|
||||
};
|
||||
|
||||
#include "axp22x.dtsi"
|
||||
|
||||
®_aldo3 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "avcc";
|
||||
};
|
||||
|
||||
®_dc1sw {
|
||||
regulator-name = "vcc-lcd";
|
||||
};
|
||||
|
||||
®_dc5ldo {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1320000>;
|
||||
regulator-name = "vdd-cpus"; /* This is an educated guess */
|
||||
};
|
||||
|
||||
®_dcdc1 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-name = "vcc-3v0";
|
||||
};
|
||||
|
||||
®_dcdc2 {
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1320000>;
|
||||
regulator-name = "vdd-gpu";
|
||||
};
|
||||
|
||||
®_dcdc3 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1320000>;
|
||||
regulator-name = "vdd-cpu";
|
||||
};
|
||||
|
||||
®_dcdc4 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <700000>;
|
||||
regulator-max-microvolt = <1320000>;
|
||||
regulator-name = "vdd-sys-dll";
|
||||
};
|
||||
|
||||
®_dcdc5 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-name = "vcc-dram";
|
||||
};
|
||||
|
||||
®_dldo1 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-wifi";
|
||||
};
|
||||
|
||||
®_drivevbus {
|
||||
regulator-name = "usb0-vbus";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&simplefb_lcd {
|
||||
vcc-lcd-supply = <®_dc1sw>;
|
||||
};
|
||||
|
||||
&usb_otg {
|
||||
dr_mode = "otg";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_power_supply {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb0_id_detect_pin>;
|
||||
usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
|
||||
usb0_vbus_power-supply = <&usb_power_supply>;
|
||||
usb0_vbus-supply = <®_drivevbus>;
|
||||
usb1_vbus-supply = <®_dldo1>;
|
||||
status = "okay";
|
||||
};
|
Loading…
Reference in a new issue