iio: accel: kxcjk-1013: Support thresholds
This chip has a motion detect capability. Using IIO events to specify thresholds and pushing events. In addition a new trigger of type any-motion is added, which pushes data to buffer only when there is any movement. Change list: Comments addressed for Re: [PATCH 5/6] iio: accel: kxcjk-1013: Support thresholds Date: 07/20/2014 - Both motion detect and data ready can be enabled together - Sending RISING/FALLING events based on int status - Separate interrupt configuration for data ready and motion detect Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This commit is contained in:
parent
b5faca4b59
commit
b4b491c083
|
@ -27,6 +27,7 @@
|
|||
#include <linux/iio/sysfs.h>
|
||||
#include <linux/iio/buffer.h>
|
||||
#include <linux/iio/trigger.h>
|
||||
#include <linux/iio/events.h>
|
||||
#include <linux/iio/trigger_consumer.h>
|
||||
#include <linux/iio/triggered_buffer.h>
|
||||
#include <linux/iio/accel/kxcjk_1013.h>
|
||||
|
@ -75,16 +76,30 @@
|
|||
|
||||
#define KXCJK1013_SLEEP_DELAY_MS 2000
|
||||
|
||||
#define KXCJK1013_REG_INT_SRC2_BIT_ZP BIT(0)
|
||||
#define KXCJK1013_REG_INT_SRC2_BIT_ZN BIT(1)
|
||||
#define KXCJK1013_REG_INT_SRC2_BIT_YP BIT(2)
|
||||
#define KXCJK1013_REG_INT_SRC2_BIT_YN BIT(3)
|
||||
#define KXCJK1013_REG_INT_SRC2_BIT_XP BIT(4)
|
||||
#define KXCJK1013_REG_INT_SRC2_BIT_XN BIT(5)
|
||||
|
||||
#define KXCJK1013_DEFAULT_WAKE_THRES 1
|
||||
|
||||
struct kxcjk1013_data {
|
||||
struct i2c_client *client;
|
||||
struct iio_trigger *trig;
|
||||
bool trig_mode;
|
||||
struct iio_trigger *dready_trig;
|
||||
struct iio_trigger *motion_trig;
|
||||
struct mutex mutex;
|
||||
s16 buffer[8];
|
||||
u8 odr_bits;
|
||||
u8 range;
|
||||
int wake_thres;
|
||||
int wake_dur;
|
||||
bool active_high_intr;
|
||||
bool trigger_on;
|
||||
bool dready_trigger_on;
|
||||
int ev_enable_state;
|
||||
bool motion_trigger_on;
|
||||
int64_t timestamp;
|
||||
};
|
||||
|
||||
enum kxcjk1013_axis {
|
||||
|
@ -131,6 +146,23 @@ static const struct {
|
|||
{19163, 1, 0},
|
||||
{38326, 0, 1} };
|
||||
|
||||
static const struct {
|
||||
int val;
|
||||
int val2;
|
||||
int odr_bits;
|
||||
} wake_odr_data_rate_table[] = { {0, 781000, 0x00},
|
||||
{1, 563000, 0x01},
|
||||
{3, 125000, 0x02},
|
||||
{6, 250000, 0x03},
|
||||
{12, 500000, 0x04},
|
||||
{25, 0, 0x05},
|
||||
{50, 0, 0x06},
|
||||
{100, 0, 0x06},
|
||||
{200, 0, 0x06},
|
||||
{400, 0, 0x06},
|
||||
{800, 0, 0x06},
|
||||
{1600, 0, 0x06} };
|
||||
|
||||
static int kxcjk1013_set_mode(struct kxcjk1013_data *data,
|
||||
enum kxcjk1013_mode mode)
|
||||
{
|
||||
|
@ -270,6 +302,8 @@ static int kxcjk1013_chip_init(struct kxcjk1013_data *data)
|
|||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
data->wake_thres = KXCJK1013_DEFAULT_WAKE_THRES;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -304,8 +338,96 @@ static int kxcjk1013_set_power_state(struct kxcjk1013_data *data, bool on)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int kxcjk1013_chip_setup_interrupt(struct kxcjk1013_data *data,
|
||||
bool status)
|
||||
static int kxcjk1013_chip_update_thresholds(struct kxcjk1013_data *data)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = i2c_smbus_write_byte_data(data->client,
|
||||
KXCJK1013_REG_WAKE_TIMER,
|
||||
data->wake_dur);
|
||||
if (ret < 0) {
|
||||
dev_err(&data->client->dev,
|
||||
"Error writing reg_wake_timer\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = i2c_smbus_write_byte_data(data->client,
|
||||
KXCJK1013_REG_WAKE_THRES,
|
||||
data->wake_thres);
|
||||
if (ret < 0) {
|
||||
dev_err(&data->client->dev, "Error writing reg_wake_thres\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int kxcjk1013_setup_any_motion_interrupt(struct kxcjk1013_data *data,
|
||||
bool status)
|
||||
{
|
||||
int ret;
|
||||
enum kxcjk1013_mode store_mode;
|
||||
|
||||
ret = kxcjk1013_get_mode(data, &store_mode);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* This is requirement by spec to change state to STANDBY */
|
||||
ret = kxcjk1013_set_mode(data, STANDBY);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = kxcjk1013_chip_update_thresholds(data);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_CTRL1);
|
||||
if (ret < 0) {
|
||||
dev_err(&data->client->dev, "Error reading reg_int_ctrl1\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (status)
|
||||
ret |= KXCJK1013_REG_INT_REG1_BIT_IEN;
|
||||
else
|
||||
ret &= ~KXCJK1013_REG_INT_REG1_BIT_IEN;
|
||||
|
||||
ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_INT_CTRL1,
|
||||
ret);
|
||||
if (ret < 0) {
|
||||
dev_err(&data->client->dev, "Error writing reg_int_ctrl1\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_CTRL1);
|
||||
if (ret < 0) {
|
||||
dev_err(&data->client->dev, "Error reading reg_ctrl1\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (status)
|
||||
ret |= KXCJK1013_REG_CTRL1_BIT_WUFE;
|
||||
else
|
||||
ret &= ~KXCJK1013_REG_CTRL1_BIT_WUFE;
|
||||
|
||||
ret = i2c_smbus_write_byte_data(data->client,
|
||||
KXCJK1013_REG_CTRL1, ret);
|
||||
if (ret < 0) {
|
||||
dev_err(&data->client->dev, "Error writing reg_ctrl1\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (store_mode == OPERATION) {
|
||||
ret = kxcjk1013_set_mode(data, OPERATION);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int kxcjk1013_setup_new_data_interrupt(struct kxcjk1013_data *data,
|
||||
bool status)
|
||||
{
|
||||
int ret;
|
||||
enum kxcjk1013_mode store_mode;
|
||||
|
@ -378,6 +500,20 @@ static int kxcjk1013_convert_freq_to_bit(int val, int val2)
|
|||
return -EINVAL;
|
||||
}
|
||||
|
||||
static int kxcjk1013_convert_wake_odr_to_bit(int val, int val2)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(wake_odr_data_rate_table); ++i) {
|
||||
if (wake_odr_data_rate_table[i].val == val &&
|
||||
wake_odr_data_rate_table[i].val2 == val2) {
|
||||
return wake_odr_data_rate_table[i].odr_bits;
|
||||
}
|
||||
}
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static int kxcjk1013_set_odr(struct kxcjk1013_data *data, int val, int val2)
|
||||
{
|
||||
int ret;
|
||||
|
@ -406,6 +542,17 @@ static int kxcjk1013_set_odr(struct kxcjk1013_data *data, int val, int val2)
|
|||
|
||||
data->odr_bits = odr_bits;
|
||||
|
||||
odr_bits = kxcjk1013_convert_wake_odr_to_bit(val, val2);
|
||||
if (odr_bits < 0)
|
||||
return odr_bits;
|
||||
|
||||
ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_CTRL2,
|
||||
odr_bits);
|
||||
if (ret < 0) {
|
||||
dev_err(&data->client->dev, "Error writing reg_ctrl2\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (store_mode == OPERATION) {
|
||||
ret = kxcjk1013_set_mode(data, OPERATION);
|
||||
if (ret < 0)
|
||||
|
@ -557,12 +704,120 @@ static int kxcjk1013_write_raw(struct iio_dev *indio_dev,
|
|||
return ret;
|
||||
}
|
||||
|
||||
static int kxcjk1013_read_event(struct iio_dev *indio_dev,
|
||||
const struct iio_chan_spec *chan,
|
||||
enum iio_event_type type,
|
||||
enum iio_event_direction dir,
|
||||
enum iio_event_info info,
|
||||
int *val, int *val2)
|
||||
{
|
||||
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
||||
|
||||
*val2 = 0;
|
||||
switch (info) {
|
||||
case IIO_EV_INFO_VALUE:
|
||||
*val = data->wake_thres;
|
||||
break;
|
||||
case IIO_EV_INFO_PERIOD:
|
||||
*val = data->wake_dur;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return IIO_VAL_INT;
|
||||
}
|
||||
|
||||
static int kxcjk1013_write_event(struct iio_dev *indio_dev,
|
||||
const struct iio_chan_spec *chan,
|
||||
enum iio_event_type type,
|
||||
enum iio_event_direction dir,
|
||||
enum iio_event_info info,
|
||||
int val, int val2)
|
||||
{
|
||||
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
||||
|
||||
if (data->ev_enable_state)
|
||||
return -EBUSY;
|
||||
|
||||
switch (info) {
|
||||
case IIO_EV_INFO_VALUE:
|
||||
data->wake_thres = val;
|
||||
break;
|
||||
case IIO_EV_INFO_PERIOD:
|
||||
data->wake_dur = val;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int kxcjk1013_read_event_config(struct iio_dev *indio_dev,
|
||||
const struct iio_chan_spec *chan,
|
||||
enum iio_event_type type,
|
||||
enum iio_event_direction dir)
|
||||
{
|
||||
|
||||
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
||||
|
||||
return data->ev_enable_state;
|
||||
}
|
||||
|
||||
static int kxcjk1013_write_event_config(struct iio_dev *indio_dev,
|
||||
const struct iio_chan_spec *chan,
|
||||
enum iio_event_type type,
|
||||
enum iio_event_direction dir,
|
||||
int state)
|
||||
{
|
||||
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
||||
int ret;
|
||||
|
||||
if (state && data->ev_enable_state)
|
||||
return 0;
|
||||
|
||||
mutex_lock(&data->mutex);
|
||||
|
||||
if (!state && data->motion_trigger_on) {
|
||||
data->ev_enable_state = 0;
|
||||
mutex_unlock(&data->mutex);
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* We will expect the enable and disable to do operation in
|
||||
* in reverse order. This will happen here anyway as our
|
||||
* resume operation uses sync mode runtime pm calls, the
|
||||
* suspend operation will be delayed by autosuspend delay
|
||||
* So the disable operation will still happen in reverse of
|
||||
* enable operation. When runtime pm is disabled the mode
|
||||
* is always on so sequence doesn't matter
|
||||
*/
|
||||
ret = kxcjk1013_set_power_state(data, state);
|
||||
if (ret < 0) {
|
||||
mutex_unlock(&data->mutex);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = kxcjk1013_setup_any_motion_interrupt(data, state);
|
||||
if (ret < 0) {
|
||||
mutex_unlock(&data->mutex);
|
||||
return ret;
|
||||
}
|
||||
|
||||
data->ev_enable_state = state;
|
||||
mutex_unlock(&data->mutex);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int kxcjk1013_validate_trigger(struct iio_dev *indio_dev,
|
||||
struct iio_trigger *trig)
|
||||
{
|
||||
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
||||
|
||||
if (data->trig != trig)
|
||||
if (data->dready_trig != trig && data->motion_trig != trig)
|
||||
return -EINVAL;
|
||||
|
||||
return 0;
|
||||
|
@ -583,6 +838,14 @@ static const struct attribute_group kxcjk1013_attrs_group = {
|
|||
.attrs = kxcjk1013_attributes,
|
||||
};
|
||||
|
||||
static const struct iio_event_spec kxcjk1013_event = {
|
||||
.type = IIO_EV_TYPE_THRESH,
|
||||
.dir = IIO_EV_DIR_RISING | IIO_EV_DIR_FALLING,
|
||||
.mask_separate = BIT(IIO_EV_INFO_VALUE) |
|
||||
BIT(IIO_EV_INFO_ENABLE) |
|
||||
BIT(IIO_EV_INFO_PERIOD)
|
||||
};
|
||||
|
||||
#define KXCJK1013_CHANNEL(_axis) { \
|
||||
.type = IIO_ACCEL, \
|
||||
.modified = 1, \
|
||||
|
@ -598,6 +861,8 @@ static const struct attribute_group kxcjk1013_attrs_group = {
|
|||
.shift = 4, \
|
||||
.endianness = IIO_CPU, \
|
||||
}, \
|
||||
.event_spec = &kxcjk1013_event, \
|
||||
.num_event_specs = 1 \
|
||||
}
|
||||
|
||||
static const struct iio_chan_spec kxcjk1013_channels[] = {
|
||||
|
@ -611,6 +876,10 @@ static const struct iio_info kxcjk1013_info = {
|
|||
.attrs = &kxcjk1013_attrs_group,
|
||||
.read_raw = kxcjk1013_read_raw,
|
||||
.write_raw = kxcjk1013_write_raw,
|
||||
.read_event_value = kxcjk1013_read_event,
|
||||
.write_event_value = kxcjk1013_write_event,
|
||||
.write_event_config = kxcjk1013_write_event_config,
|
||||
.read_event_config = kxcjk1013_read_event_config,
|
||||
.validate_trigger = kxcjk1013_validate_trigger,
|
||||
.driver_module = THIS_MODULE,
|
||||
};
|
||||
|
@ -636,7 +905,7 @@ static irqreturn_t kxcjk1013_trigger_handler(int irq, void *p)
|
|||
mutex_unlock(&data->mutex);
|
||||
|
||||
iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
|
||||
pf->timestamp);
|
||||
data->timestamp);
|
||||
err:
|
||||
iio_trigger_notify_done(indio_dev->trig);
|
||||
|
||||
|
@ -665,19 +934,32 @@ static int kxcjk1013_data_rdy_trigger_set_state(struct iio_trigger *trig,
|
|||
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
||||
int ret;
|
||||
|
||||
if (state && data->trigger_on)
|
||||
return 0;
|
||||
|
||||
mutex_lock(&data->mutex);
|
||||
ret = kxcjk1013_chip_setup_interrupt(data, state);
|
||||
if (!ret) {
|
||||
ret = kxcjk1013_set_power_state(data, state);
|
||||
if (ret < 0) {
|
||||
mutex_unlock(&data->mutex);
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (!state && data->ev_enable_state && data->motion_trigger_on) {
|
||||
data->motion_trigger_on = false;
|
||||
mutex_unlock(&data->mutex);
|
||||
return 0;
|
||||
}
|
||||
data->trigger_on = state;
|
||||
|
||||
ret = kxcjk1013_set_power_state(data, state);
|
||||
if (ret < 0) {
|
||||
mutex_unlock(&data->mutex);
|
||||
return ret;
|
||||
}
|
||||
if (data->motion_trig == trig)
|
||||
ret = kxcjk1013_setup_any_motion_interrupt(data, state);
|
||||
else
|
||||
ret = kxcjk1013_setup_new_data_interrupt(data, state);
|
||||
if (ret < 0) {
|
||||
mutex_unlock(&data->mutex);
|
||||
return ret;
|
||||
}
|
||||
if (data->motion_trig == trig)
|
||||
data->motion_trigger_on = state;
|
||||
else
|
||||
data->dready_trigger_on = state;
|
||||
|
||||
mutex_unlock(&data->mutex);
|
||||
|
||||
return 0;
|
||||
|
@ -689,6 +971,109 @@ static const struct iio_trigger_ops kxcjk1013_trigger_ops = {
|
|||
.owner = THIS_MODULE,
|
||||
};
|
||||
|
||||
static irqreturn_t kxcjk1013_event_handler(int irq, void *private)
|
||||
{
|
||||
struct iio_dev *indio_dev = private;
|
||||
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
||||
int ret;
|
||||
|
||||
ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_SRC1);
|
||||
if (ret < 0) {
|
||||
dev_err(&data->client->dev, "Error reading reg_int_src1\n");
|
||||
goto ack_intr;
|
||||
}
|
||||
|
||||
if (ret & 0x02) {
|
||||
ret = i2c_smbus_read_byte_data(data->client,
|
||||
KXCJK1013_REG_INT_SRC2);
|
||||
if (ret < 0) {
|
||||
dev_err(&data->client->dev,
|
||||
"Error reading reg_int_src2\n");
|
||||
goto ack_intr;
|
||||
}
|
||||
|
||||
if (ret & KXCJK1013_REG_INT_SRC2_BIT_XN)
|
||||
iio_push_event(indio_dev,
|
||||
IIO_MOD_EVENT_CODE(IIO_ACCEL,
|
||||
0,
|
||||
IIO_MOD_X,
|
||||
IIO_EV_TYPE_THRESH,
|
||||
IIO_EV_DIR_FALLING),
|
||||
data->timestamp);
|
||||
if (ret & KXCJK1013_REG_INT_SRC2_BIT_XP)
|
||||
iio_push_event(indio_dev,
|
||||
IIO_MOD_EVENT_CODE(IIO_ACCEL,
|
||||
0,
|
||||
IIO_MOD_X,
|
||||
IIO_EV_TYPE_THRESH,
|
||||
IIO_EV_DIR_RISING),
|
||||
data->timestamp);
|
||||
|
||||
|
||||
if (ret & KXCJK1013_REG_INT_SRC2_BIT_YN)
|
||||
iio_push_event(indio_dev,
|
||||
IIO_MOD_EVENT_CODE(IIO_ACCEL,
|
||||
0,
|
||||
IIO_MOD_Y,
|
||||
IIO_EV_TYPE_THRESH,
|
||||
IIO_EV_DIR_FALLING),
|
||||
data->timestamp);
|
||||
if (ret & KXCJK1013_REG_INT_SRC2_BIT_YP)
|
||||
iio_push_event(indio_dev,
|
||||
IIO_MOD_EVENT_CODE(IIO_ACCEL,
|
||||
0,
|
||||
IIO_MOD_Y,
|
||||
IIO_EV_TYPE_THRESH,
|
||||
IIO_EV_DIR_RISING),
|
||||
data->timestamp);
|
||||
|
||||
if (ret & KXCJK1013_REG_INT_SRC2_BIT_ZN)
|
||||
iio_push_event(indio_dev,
|
||||
IIO_MOD_EVENT_CODE(IIO_ACCEL,
|
||||
0,
|
||||
IIO_MOD_Z,
|
||||
IIO_EV_TYPE_THRESH,
|
||||
IIO_EV_DIR_FALLING),
|
||||
data->timestamp);
|
||||
if (ret & KXCJK1013_REG_INT_SRC2_BIT_ZP)
|
||||
iio_push_event(indio_dev,
|
||||
IIO_MOD_EVENT_CODE(IIO_ACCEL,
|
||||
0,
|
||||
IIO_MOD_Z,
|
||||
IIO_EV_TYPE_THRESH,
|
||||
IIO_EV_DIR_RISING),
|
||||
data->timestamp);
|
||||
}
|
||||
|
||||
ack_intr:
|
||||
if (data->dready_trigger_on)
|
||||
return IRQ_HANDLED;
|
||||
|
||||
ret = i2c_smbus_read_byte_data(data->client, KXCJK1013_REG_INT_REL);
|
||||
if (ret < 0)
|
||||
dev_err(&data->client->dev, "Error reading reg_int_rel\n");
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static irqreturn_t kxcjk1013_data_rdy_trig_poll(int irq, void *private)
|
||||
{
|
||||
struct iio_dev *indio_dev = private;
|
||||
struct kxcjk1013_data *data = iio_priv(indio_dev);
|
||||
|
||||
data->timestamp = iio_get_time_ns();
|
||||
|
||||
if (data->dready_trigger_on)
|
||||
iio_trigger_poll(data->dready_trig);
|
||||
else if (data->motion_trigger_on)
|
||||
iio_trigger_poll(data->motion_trig);
|
||||
|
||||
if (data->ev_enable_state)
|
||||
return IRQ_WAKE_THREAD;
|
||||
else
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int kxcjk1013_acpi_gpio_probe(struct i2c_client *client,
|
||||
struct kxcjk1013_data *data)
|
||||
{
|
||||
|
@ -731,7 +1116,6 @@ static int kxcjk1013_probe(struct i2c_client *client,
|
|||
{
|
||||
struct kxcjk1013_data *data;
|
||||
struct iio_dev *indio_dev;
|
||||
struct iio_trigger *trig = NULL;
|
||||
struct kxcjk_1013_platform_data *pdata;
|
||||
int ret;
|
||||
|
||||
|
@ -766,33 +1150,46 @@ static int kxcjk1013_probe(struct i2c_client *client,
|
|||
client->irq = kxcjk1013_acpi_gpio_probe(client, data);
|
||||
|
||||
if (client->irq >= 0) {
|
||||
trig = iio_trigger_alloc("%s-dev%d", indio_dev->name,
|
||||
indio_dev->id);
|
||||
if (!trig)
|
||||
ret = devm_request_threaded_irq(&client->dev, client->irq,
|
||||
kxcjk1013_data_rdy_trig_poll,
|
||||
kxcjk1013_event_handler,
|
||||
IRQF_TRIGGER_RISING,
|
||||
KXCJK1013_IRQ_NAME,
|
||||
indio_dev);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
data->dready_trig = devm_iio_trigger_alloc(&client->dev,
|
||||
"%s-dev%d",
|
||||
indio_dev->name,
|
||||
indio_dev->id);
|
||||
if (!data->dready_trig)
|
||||
return -ENOMEM;
|
||||
|
||||
data->trig_mode = true;
|
||||
data->motion_trig = devm_iio_trigger_alloc(&client->dev,
|
||||
"%s-any-motion-dev%d",
|
||||
indio_dev->name,
|
||||
indio_dev->id);
|
||||
if (!data->motion_trig)
|
||||
return -ENOMEM;
|
||||
|
||||
ret = devm_request_irq(&client->dev, client->irq,
|
||||
iio_trigger_generic_data_rdy_poll,
|
||||
IRQF_TRIGGER_RISING,
|
||||
KXCJK1013_IRQ_NAME,
|
||||
trig);
|
||||
if (ret) {
|
||||
dev_err(&client->dev, "unable to request IRQ\n");
|
||||
goto err_trigger_free;
|
||||
}
|
||||
|
||||
trig->dev.parent = &client->dev;
|
||||
trig->ops = &kxcjk1013_trigger_ops;
|
||||
iio_trigger_set_drvdata(trig, indio_dev);
|
||||
data->trig = trig;
|
||||
indio_dev->trig = trig;
|
||||
data->dready_trig->dev.parent = &client->dev;
|
||||
data->dready_trig->ops = &kxcjk1013_trigger_ops;
|
||||
iio_trigger_set_drvdata(data->dready_trig, indio_dev);
|
||||
indio_dev->trig = data->dready_trig;
|
||||
iio_trigger_get(indio_dev->trig);
|
||||
|
||||
ret = iio_trigger_register(trig);
|
||||
ret = iio_trigger_register(data->dready_trig);
|
||||
if (ret)
|
||||
goto err_trigger_free;
|
||||
return ret;
|
||||
|
||||
data->motion_trig->dev.parent = &client->dev;
|
||||
data->motion_trig->ops = &kxcjk1013_trigger_ops;
|
||||
iio_trigger_set_drvdata(data->motion_trig, indio_dev);
|
||||
ret = iio_trigger_register(data->motion_trig);
|
||||
if (ret) {
|
||||
data->motion_trig = NULL;
|
||||
goto err_trigger_unregister;
|
||||
}
|
||||
|
||||
ret = iio_triggered_buffer_setup(indio_dev,
|
||||
&iio_pollfunc_store_time,
|
||||
|
@ -825,14 +1222,13 @@ static int kxcjk1013_probe(struct i2c_client *client,
|
|||
err_iio_unregister:
|
||||
iio_device_unregister(indio_dev);
|
||||
err_buffer_cleanup:
|
||||
if (data->trig_mode)
|
||||
if (data->dready_trig)
|
||||
iio_triggered_buffer_cleanup(indio_dev);
|
||||
err_trigger_unregister:
|
||||
if (data->trig_mode)
|
||||
iio_trigger_unregister(trig);
|
||||
err_trigger_free:
|
||||
if (data->trig_mode)
|
||||
iio_trigger_free(trig);
|
||||
if (data->dready_trig)
|
||||
iio_trigger_unregister(data->dready_trig);
|
||||
if (data->motion_trig)
|
||||
iio_trigger_unregister(data->motion_trig);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
@ -848,10 +1244,10 @@ static int kxcjk1013_remove(struct i2c_client *client)
|
|||
|
||||
iio_device_unregister(indio_dev);
|
||||
|
||||
if (data->trig_mode) {
|
||||
if (data->dready_trig) {
|
||||
iio_triggered_buffer_cleanup(indio_dev);
|
||||
iio_trigger_unregister(data->trig);
|
||||
iio_trigger_free(data->trig);
|
||||
iio_trigger_unregister(data->dready_trig);
|
||||
iio_trigger_unregister(data->motion_trig);
|
||||
}
|
||||
|
||||
mutex_lock(&data->mutex);
|
||||
|
@ -883,7 +1279,8 @@ static int kxcjk1013_resume(struct device *dev)
|
|||
|
||||
mutex_lock(&data->mutex);
|
||||
/* Check, if the suspend occured while active */
|
||||
if (data->trigger_on)
|
||||
if (data->dready_trigger_on || data->motion_trigger_on ||
|
||||
data->ev_enable_state)
|
||||
ret = kxcjk1013_set_mode(data, OPERATION);
|
||||
mutex_unlock(&data->mutex);
|
||||
|
||||
|
|
Loading…
Reference in a new issue