redonkable
/
remarkable-linux
1
0
Fork 0
Code Releases Activity

USB fixes for 3.10-rc2 

Here are a number of tiny USB bugfixes / new device ids for 3.10-rc2
 
 The majority of these are USB gadget fixes, but they are all small.
 Other than that, some USB host controller fixes, and USB serial driver
 fixes for problems reported with them.
 
 Also hopefully a fixed up USB_OTG Kconfig dependancy, that one seems to
 be almost impossible to get right for all of the different platforms
 these days.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlGeP/gACgkQMUfUDdst+ykXygCfeIL5/HMREhUSHQgb6IiIDR81
 QHAAn0zJfRAyWUz4AtbrRsLSVfk3Q9vm
 =DQIq
 -----END PGP SIGNATURE-----

Merge tag 'usb-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a number of tiny USB bugfixes / new device ids for 3.10-rc2

  The majority of these are USB gadget fixes, but they are all small.
  Other than that, some USB host controller fixes, and USB serial driver
  fixes for problems reported with them.

  Also hopefully a fixed up USB_OTG Kconfig dependancy, that one seems
  to be almost impossible to get right for all of the different
  platforms these days."

* tag 'usb-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (56 commits)
  USB: cxacru: potential underflow in cxacru_cm_get_array()
  USB: ftdi_sio: Add support for Newport CONEX motor drivers
  USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card
  usb: ohci: fix goto wrong tag in err case
  usb: isp1760-if: fix memleak when platform_get_resource fail
  usb: ehci-s5p: fix memleak when fallback to pdata
  USB: serial: clean up chars_in_buffer
  USB: ti_usb_3410_5052: fix chars_in_buffer overhead
  USB: io_ti: fix chars_in_buffer overhead
  USB: ftdi_sio: fix chars_in_buffer overhead
  USB: ftdi_sio: clean up get_modem_status
  USB: serial: add generic wait_until_sent implementation
  USB: serial: add wait_until_sent operation
  USB: set device dma_mask without reference to global data
  USB: Blacklisted Cinterion's PLxx WWAN Interface
  usb: option: Add Telewell TW-LTE 4G
  USB: EHCI: remove bogus #error
  USB: reset resume quirk needed by a hub
  USB: usb-stor: realtek_cr: Fix compile error
  usb, chipidea: fix link error when USB_EHCI_HCD is a module
  ...
wifi-calibration
Linus Torvalds 2013-05-23 09:23:32 -07:00
parent 72dd4e7980 2a0ebf80aa
commit b64194068b
75 changed files with 268 additions and 238 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
arch/arm/configs/omap1_defconfig
View File

@ -199,7 +199,6 @@ CONFIG_USB_PHY=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y

1
arch/arm/configs/omap2plus_defconfig
View File

@ -204,7 +204,6 @@ CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=y
CONFIG_USB_WDM=y
CONFIG_USB_STORAGE=y

1
arch/mips/configs/db1000_defconfig
View File

@ -228,7 +228,6 @@ CONFIG_HIDRAW=y
CONFIG_USB_HID=y
CONFIG_USB_SUPPORT=y
CONFIG_USB=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y

1
arch/mips/configs/db1235_defconfig
View File

@ -344,7 +344,6 @@ CONFIG_UHID=y
CONFIG_USB_HIDDEV=y
CONFIG_USB=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y

1
arch/mips/configs/lemote2f_defconfig
View File

@ -300,7 +300,6 @@ CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y

1
arch/powerpc/configs/ps3_defconfig
View File

@ -136,7 +136,6 @@ CONFIG_HID_SMARTJOYPLUS=m
CONFIG_USB_HIDDEV=y
CONFIG_USB=m
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=m
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_HCD_PPC_OF is not set

2
drivers/net/usb/usbnet.c
View File

@ -1477,7 +1477,7 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
/* usbnet already took usb runtime pm, so have to enable the feature
* for usb interface, otherwise usb_autopm_get_interface may return
* failure if USB_SUSPEND(RUNTIME_PM) is enabled.
* failure if RUNTIME_PM is enabled.
*/
if (!driver->supports_autosuspend) {
driver->supports_autosuspend = 1;

1
drivers/staging/dwc2/Kconfig
View File

@ -2,7 +2,6 @@ config USB_DWC2
tristate "DesignWare USB2 DRD Core Support"
depends on USB
depends on VIRT_TO_BUS
select USB_OTG_UTILS
help
Say Y or M here if your system has a Dual Role HighSpeed
USB controller based on the DesignWare HSOTG IP Core.

2
drivers/staging/gdm72xx/Kconfig
View File

@ -39,7 +39,7 @@ if WIMAX_GDM72XX_USB
config WIMAX_GDM72XX_USB_PM
bool "Enable power managerment support"
depends on USB_SUSPEND
depends on PM_RUNTIME
endif # WIMAX_GDM72XX_USB

3
drivers/usb/atm/cxacru.c
View File

@ -686,7 +686,8 @@ static int cxacru_cm_get_array(struct cxacru_data *instance, enum cxacru_cm_requ
{
int ret, len;
__le32 *buf;
int offb, offd;
int offb;
unsigned int offd;
const int stride = CMD_PACKET_SIZE / (4 * 2) - 1;
int buflen = ((size - 1) / stride + 1 + size * 2) * 4;

2
drivers/usb/chipidea/Kconfig
View File

@ -20,7 +20,7 @@ config USB_CHIPIDEA_UDC
config USB_CHIPIDEA_HOST
bool "ChipIdea host controller"
depends on USB=y || USB=USB_CHIPIDEA
depends on USB_EHCI_HCD
depends on USB_EHCI_HCD=y
select USB_EHCI_ROOT_HUB_TT
help
Say Y here to enable host controller functionality of the

15
drivers/usb/chipidea/ci13xxx_imx.c
View File

@ -173,17 +173,10 @@ static int ci13xxx_imx_probe(struct platform_device *pdev)
ci13xxx_imx_platdata.phy = data->phy;
if (!pdev->dev.dma_mask) {
pdev->dev.dma_mask = devm_kzalloc(&pdev->dev,
sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
if (!pdev->dev.dma_mask) {
ret = -ENOMEM;
dev_err(&pdev->dev, "Failed to alloc dma_mask!\n");
goto err;
}
*pdev->dev.dma_mask = DMA_BIT_MASK(32);
dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask);
}
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
if (!pdev->dev.coherent_dma_mask)
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
if (usbmisc_ops && usbmisc_ops->init) {
ret = usbmisc_ops->init(&pdev->dev);

2
drivers/usb/core/Kconfig
View File

@ -51,7 +51,7 @@ config USB_DYNAMIC_MINORS
config USB_OTG
bool "OTG support"
depends on USB_SUSPEND
depends on PM_RUNTIME
default n
help
The most notable feature of USB OTG is support for a

3
drivers/usb/core/quirks.c
View File

@ -88,6 +88,9 @@ static const struct usb_device_id usb_quirk_list[] = {
/* Edirol SD-20 */
{ USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME },
/* Alcor Micro Corp. Hub */
{ USB_DEVICE(0x058f, 0x9254), .driver_info = USB_QUIRK_RESET_RESUME },
/* appletouch */
{ USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME },

6
drivers/usb/dwc3/Kconfig
View File

@ -19,21 +19,21 @@ choice
config USB_DWC3_HOST
bool "Host only mode"
depends on USB
depends on USB=y || USB=USB_DWC3
help
Select this when you want to use DWC3 in host mode only,
thereby the gadget feature will be regressed.
config USB_DWC3_GADGET
bool "Gadget only mode"
depends on USB_GADGET
depends on USB_GADGET=y || USB_GADGET=USB_DWC3
help
Select this when you want to use DWC3 in gadget mode only,
thereby the host feature will be regressed.
config USB_DWC3_DUAL_ROLE
bool "Dual Role mode"
depends on (USB && USB_GADGET)
depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
help
This is the default mode of working of DWC3 controller where
both host and gadget features are enabled.

6
drivers/usb/dwc3/dwc3-exynos.c
View File

@ -95,8 +95,6 @@ static int dwc3_exynos_remove_child(struct device *dev, void *unused)
return 0;
}
static u64 dwc3_exynos_dma_mask = DMA_BIT_MASK(32);
static int dwc3_exynos_probe(struct platform_device *pdev)
{
struct dwc3_exynos *exynos;
@ -118,7 +116,9 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
* Once we move to full device tree support this will vanish off.
*/
if (!dev->dma_mask)
dev->dma_mask = &dwc3_exynos_dma_mask;
dev->dma_mask = &dev->coherent_dma_mask;
if (!dev->coherent_dma_mask)
dev->coherent_dma_mask = DMA_BIT_MASK(32);
platform_set_drvdata(pdev, exynos);

1
drivers/usb/gadget/Kconfig
View File

@ -146,7 +146,6 @@ config USB_LPC32XX
depends on ARCH_LPC32XX
depends on USB_PHY
select USB_ISP1301
select USB_OTG_UTILS
help
This option selects the USB device controller in the LPC32xx SoC.

2
drivers/usb/gadget/atmel_usba_udc.c
View File

@ -1992,8 +1992,6 @@ err_map_regs:
err_get_hclk:
clk_put(pclk);
platform_set_drvdata(pdev, NULL);
return ret;
}

1
drivers/usb/gadget/bcm63xx_udc.c
View File

@ -2410,7 +2410,6 @@ static int bcm63xx_udc_remove(struct platform_device *pdev)
usb_del_gadget_udc(&udc->gadget);
BUG_ON(udc->driver);
platform_set_drvdata(pdev, NULL);
bcm63xx_uninit_udc_hw(udc);
return 0;

8
drivers/usb/gadget/configfs.c
View File

@ -821,8 +821,10 @@ static int configfs_composite_bind(struct usb_gadget *gadget,
gi->gstrings[i] = NULL;
s = usb_gstrings_attach(&gi->cdev, gi->gstrings,
USB_GADGET_FIRST_AVAIL_IDX);
if (IS_ERR(s))
if (IS_ERR(s)) {
ret = PTR_ERR(s);
goto err_comp_cleanup;
}
gi->cdev.desc.iManufacturer = s[USB_GADGET_MANUFACTURER_IDX].id;
gi->cdev.desc.iProduct = s[USB_GADGET_PRODUCT_IDX].id;
@ -847,8 +849,10 @@ static int configfs_composite_bind(struct usb_gadget *gadget,
}
cfg->gstrings[i] = NULL;
s = usb_gstrings_attach(&gi->cdev, cfg->gstrings, 1);
if (IS_ERR(s))
if (IS_ERR(s)) {
ret = PTR_ERR(s);
goto err_comp_cleanup;
}
c->iConfiguration = s[0].id;
}

5
drivers/usb/gadget/dummy_hcd.c
View File

@ -1001,7 +1001,6 @@ static int dummy_udc_remove(struct platform_device *pdev)
struct dummy *dum = platform_get_drvdata(pdev);
usb_del_gadget_udc(&dum->gadget);
platform_set_drvdata(pdev, NULL);
device_remove_file(&dum->gadget.dev, &dev_attr_function);
return 0;
}
@ -2661,8 +2660,10 @@ static int __init init(void)
}
for (i = 0; i < mod_data.num; i++) {
dum[i] = kzalloc(sizeof(struct dummy), GFP_KERNEL);
if (!dum[i])
if (!dum[i]) {
retval = -ENOMEM;
goto err_add_pdata;
}
retval = platform_device_add_data(the_hcd_pdev[i], &dum[i],
sizeof(void *));
if (retval)

1
drivers/usb/gadget/f_ecm.c
View File

@ -816,6 +816,7 @@ ecm_unbind(struct usb_configuration *c, struct usb_function *f)
* @c: the configuration to support the network link
* @ethaddr: a buffer in which the ethernet address of the host side
* side of the link was recorded
* @dev: eth_dev structure
* Context: single threaded during gadget setup
*
* Returns zero on success, else negative errno.

1
drivers/usb/gadget/f_subset.c
View File

@ -373,6 +373,7 @@ geth_unbind(struct usb_configuration *c, struct usb_function *f)
* @c: the configuration to support the network link
* @ethaddr: a buffer in which the ethernet address of the host side
* side of the link was recorded
* @dev: eth_dev structure
* Context: single threaded during gadget setup
*
* Returns zero on success, else negative errno.

2
drivers/usb/gadget/f_uac2.c
View File

@ -456,8 +456,6 @@ static int snd_uac2_remove(struct platform_device *pdev)
{
struct snd_card *card = platform_get_drvdata(pdev);
platform_set_drvdata(pdev, NULL);
if (card)
return snd_card_free(card);

4
drivers/usb/gadget/fusb300_udc.c
View File

@ -1461,8 +1461,10 @@ static int __init fusb300_probe(struct platform_device *pdev)
fusb300->ep0_req = fusb300_alloc_request(&fusb300->ep[0]->ep,
GFP_KERNEL);
if (fusb300->ep0_req == NULL)
if (fusb300->ep0_req == NULL) {
ret = -ENOMEM;
goto clean_up3;
}
init_controller(fusb300);
ret = usb_add_gadget_udc(&pdev->dev, &fusb300->gadget);

2
drivers/usb/gadget/imx_udc.c
View File

@ -1511,8 +1511,6 @@ static int __exit imx_udc_remove(struct platform_device *pdev)
if (pdata->exit)
pdata->exit(&pdev->dev);
platform_set_drvdata(pdev, NULL);
return 0;
}

4
drivers/usb/gadget/m66592-udc.c
View File

@ -1660,8 +1660,10 @@ static int __init m66592_probe(struct platform_device *pdev)
m66592->epaddr2ep[0] = &m66592->ep[0];
m66592->ep0_req = m66592_alloc_request(&m66592->ep[0].ep, GFP_KERNEL);
if (m66592->ep0_req == NULL)
if (m66592->ep0_req == NULL) {
ret = -ENOMEM;
goto clean_up3;
}
m66592->ep0_req->complete = nop_completion;
init_controller(m66592);

1
drivers/usb/gadget/pxa25x_udc.c
View File

@ -2236,7 +2236,6 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
dev->transceiver = NULL;
}
platform_set_drvdata(pdev, NULL);
the_controller = NULL;
return 0;
}

4
drivers/usb/gadget/r8a66597-udc.c
View File

@ -1977,8 +1977,10 @@ static int __init r8a66597_probe(struct platform_device *pdev)
r8a66597->ep0_req = r8a66597_alloc_request(&r8a66597->ep[0].ep,
GFP_KERNEL);
if (r8a66597->ep0_req == NULL)
if (r8a66597->ep0_req == NULL) {
ret = -ENOMEM;
goto clean_up3;
}
r8a66597->ep0_req->complete = nop_completion;
ret = usb_add_gadget_udc(&pdev->dev, &r8a66597->gadget);

2
drivers/usb/gadget/s3c-hsotg.c
View File

@ -437,7 +437,7 @@ static void s3c_hsotg_unmap_dma(struct s3c_hsotg *hsotg,
if (hs_req->req.length == 0)
return;
usb_gadget_unmap_request(&hsotg->gadget, hs_req, hs_ep->dir_in);
usb_gadget_unmap_request(&hsotg->gadget, req, hs_ep->dir_in);
}
/**

3
drivers/usb/gadget/s3c2410_udc.c
View File

@ -1851,6 +1851,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
irq = gpio_to_irq(udc_info->vbus_pin);
if (irq < 0) {
dev_err(dev, "no irq for gpio vbus pin\n");
retval = irq;
goto err_gpio_claim;
}
@ -1948,8 +1949,6 @@ static int s3c2410_udc_remove(struct platform_device *pdev)
iounmap(base_addr);
release_mem_region(rsrc_start, rsrc_len);
platform_set_drvdata(pdev, NULL);
if (!IS_ERR(udc_clock) && udc_clock != NULL) {
clk_disable(udc_clock);
clk_put(udc_clock);

8
drivers/usb/gadget/zero.c
View File

@ -284,12 +284,16 @@ static int __init zero_bind(struct usb_composite_dev *cdev)
ss_opts->bulk_buflen = gzero_options.bulk_buflen;
func_ss = usb_get_function(func_inst_ss);
if (IS_ERR(func_ss))
if (IS_ERR(func_ss)) {
status = PTR_ERR(func_ss);
goto err_put_func_inst_ss;
}
func_inst_lb = usb_get_function_instance("Loopback");
if (IS_ERR(func_inst_lb))
if (IS_ERR(func_inst_lb)) {
status = PTR_ERR(func_inst_lb);
goto err_put_func_ss;
}
lb_opts = container_of(func_inst_lb, struct f_lb_opts, func_inst);
lb_opts->bulk_buflen = gzero_options.bulk_buflen;

17
drivers/usb/host/Kconfig
View File

@ -507,7 +507,7 @@ endif # USB_OHCI_HCD
config USB_UHCI_HCD
tristate "UHCI HCD (most Intel and VIA) support"
depends on PCI || SPARC_LEON || ARCH_VT8500
depends on PCI || USB_UHCI_SUPPORT_NON_PCI_HC
---help---
The Universal Host Controller Interface is a standard by Intel for
accessing the USB hardware in the PC (which is also called the USB
@ -524,26 +524,19 @@ config USB_UHCI_HCD
config USB_UHCI_SUPPORT_NON_PCI_HC
bool
depends on USB_UHCI_HCD
default y if (SPARC_LEON || ARCH_VT8500)
default y if (SPARC_LEON || USB_UHCI_PLATFORM)
config USB_UHCI_PLATFORM
bool "Generic UHCI Platform Driver support"
depends on USB_UHCI_SUPPORT_NON_PCI_HC
bool
default y if ARCH_VT8500
---help---
Enable support for generic UHCI platform devices that require no
additional configuration.
config USB_UHCI_BIG_ENDIAN_MMIO
bool
depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON
default y
default y if SPARC_LEON
config USB_UHCI_BIG_ENDIAN_DESC
bool
depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON
default y
default y if SPARC_LEON
config USB_FHCI_HCD
tristate "Freescale QE USB Host Controller support"

6
drivers/usb/host/ehci-atmel.c
View File

@ -63,8 +63,6 @@ static void atmel_stop_ehci(struct platform_device *pdev)
/*-------------------------------------------------------------------------*/
static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32);
static int ehci_atmel_drv_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
@ -93,7 +91,9 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev)
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &at91_ehci_dma_mask;
pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
if (!pdev->dev.coherent_dma_mask)
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd) {

17
drivers/usb/host/ehci-hcd.c
View File

@ -1286,23 +1286,6 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_hcd_sead3_driver
#endif
#if !IS_ENABLED(CONFIG_USB_EHCI_PCI) && \
!IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \
!IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \
!IS_ENABLED(CONFIG_USB_EHCI_MXC) && \
!IS_ENABLED(CONFIG_USB_EHCI_HCD_OMAP) && \
!IS_ENABLED(CONFIG_USB_EHCI_HCD_ORION) && \
!IS_ENABLED(CONFIG_USB_EHCI_HCD_SPEAR) && \
!IS_ENABLED(CONFIG_USB_EHCI_S5P) && \
!IS_ENABLED(CONFIG_USB_EHCI_HCD_AT91) && \
!IS_ENABLED(CONFIG_USB_EHCI_MSM) && \
!defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && \
!defined(OF_PLATFORM_DRIVER) && \
!defined(XILINX_OF_PLATFORM_DRIVER)
#error "missing bus glue for ehci-hcd"
#endif
static int __init ehci_hcd_init(void)
{
int retval = 0;

8
drivers/usb/host/ehci-omap.c
View File

@ -90,8 +90,6 @@ static const struct ehci_driver_overrides ehci_omap_overrides __initdata = {
.extra_priv_size = sizeof(struct omap_hcd),
};
static u64 omap_ehci_dma_mask = DMA_BIT_MASK(32);
/**
* ehci_hcd_omap_probe - initialize TI-based HCDs
*
@ -146,8 +144,10 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
* Since shared usb code relies on it, set it here for now.
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &omap_ehci_dma_mask;
if (!dev->dma_mask)
dev->dma_mask = &dev->coherent_dma_mask;
if (!dev->coherent_dma_mask)
dev->coherent_dma_mask = DMA_BIT_MASK(32);
hcd = usb_create_hcd(&ehci_omap_hc_driver, dev,
dev_name(dev));

6
drivers/usb/host/ehci-orion.c
View File

@ -137,8 +137,6 @@ ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
}
}
static u64 ehci_orion_dma_mask = DMA_BIT_MASK(32);
static int ehci_orion_drv_probe(struct platform_device *pdev)
{
struct orion_ehci_data *pd = pdev->dev.platform_data;
@ -183,7 +181,9 @@ static int ehci_orion_drv_probe(struct platform_device *pdev)
* now. Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &ehci_orion_dma_mask;
pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
if (!pdev->dev.coherent_dma_mask)
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
if (!request_mem_region(res->start, resource_size(res),
ehci_orion_hc_driver.description)) {

5
drivers/usb/host/ehci-s5p.c
View File

@ -71,8 +71,6 @@ static void s5p_setup_vbus_gpio(struct platform_device *pdev)
dev_err(dev, "can't request ehci vbus gpio %d", gpio);
}
static u64 ehci_s5p_dma_mask = DMA_BIT_MASK(32);
static int s5p_ehci_probe(struct platform_device *pdev)
{
struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
@ -90,7 +88,7 @@ static int s5p_ehci_probe(struct platform_device *pdev)
* Once we move to full device tree support this will vanish off.
*/
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &ehci_s5p_dma_mask;
pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
if (!pdev->dev.coherent_dma_mask)
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
@ -107,6 +105,7 @@ static int s5p_ehci_probe(struct platform_device *pdev)
if (IS_ERR(phy)) {
/* Fallback to pdata */
if (!pdata) {
usb_put_hcd(hcd);
dev_warn(&pdev->dev, "no platform data or transceiver defined\n");
return -EPROBE_DEFER;
} else {

6
drivers/usb/host/ehci-spear.c
View File

@ -58,8 +58,6 @@ static int ehci_spear_drv_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(ehci_spear_pm_ops, ehci_spear_drv_suspend,
ehci_spear_drv_resume);
static u64 spear_ehci_dma_mask = DMA_BIT_MASK(32);
static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd ;
@ -84,7 +82,9 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &spear_ehci_dma_mask;
pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
if (!pdev->dev.coherent_dma_mask)
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
usbh_clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(usbh_clk)) {

6
drivers/usb/host/ehci-tegra.c
View File

@ -637,8 +637,6 @@ static void tegra_ehci_set_phcd(struct usb_phy *x, bool enable)
writel(val, base + TEGRA_USB_PORTSC1);
}
static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32);
static int tegra_ehci_probe(struct platform_device *pdev)
{
struct resource *res;
@ -661,7 +659,9 @@ static int tegra_ehci_probe(struct platform_device *pdev)
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &tegra_ehci_dma_mask;
pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
if (!pdev->dev.coherent_dma_mask)
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
setup_vbus_gpio(pdev, pdata);

2
drivers/usb/host/isp1760-hcd.c
View File

@ -1739,7 +1739,7 @@ static int isp1760_hub_status_data(struct usb_hcd *hcd, char *buf)
int retval = 1;
unsigned long flags;
/* if !USB_SUSPEND, root hub timers won't get shut down ... */
/* if !PM_RUNTIME, root hub timers won't get shut down ... */
if (!HC_IS_RUNNING(hcd->state))
return 0;

4
drivers/usb/host/isp1760-if.c
View File

@ -373,8 +373,10 @@ static int isp1760_plat_probe(struct platform_device *pdev)
irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!irq_res) {
pr_warning("isp1760: IRQ resource not available\n");
return -ENODEV;
ret = -ENODEV;
goto cleanup;
}
irqflags |= irq_res->flags & IRQF_TRIGGER_MASK;
if (priv) {

6
drivers/usb/host/ohci-at91.c
View File

@ -504,8 +504,6 @@ static const struct of_device_id at91_ohci_dt_ids[] = {
MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids);
static u64 at91_ohci_dma_mask = DMA_BIT_MASK(32);
static int ohci_at91_of_init(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
@ -522,7 +520,9 @@ static int ohci_at91_of_init(struct platform_device *pdev)
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &at91_ohci_dma_mask;
pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
if (!pdev->dev.coherent_dma_mask)
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)

4
drivers/usb/host/ohci-exynos.c
View File

@ -98,8 +98,6 @@ static const struct hc_driver exynos_ohci_hc_driver = {
.start_port_reset = ohci_start_port_reset,
};
static u64 ohci_exynos_dma_mask = DMA_BIT_MASK(32);
static int exynos_ohci_probe(struct platform_device *pdev)
{
struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
@ -117,7 +115,7 @@ static int exynos_ohci_probe(struct platform_device *pdev)
* Once we move to full device tree support this will vanish off.
*/
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &ohci_exynos_dma_mask;
pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
if (!pdev->dev.coherent_dma_mask)
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);

34
drivers/usb/host/ohci-hcd.c
View File

@ -233,14 +233,14 @@ static int ohci_urb_enqueue (
urb->start_frame = frame;
}
} else if (ed->type == PIPE_ISOCHRONOUS) {
u16 next = ohci_frame_no(ohci) + 2;
u16 next = ohci_frame_no(ohci) + 1;
u16 frame = ed->last_iso + ed->interval;
/* Behind the scheduling threshold? */
if (unlikely(tick_before(frame, next))) {
/* USB_ISO_ASAP: Round up to the first available slot */
if (urb->transfer_flags & URB_ISO_ASAP)
if (urb->transfer_flags & URB_ISO_ASAP) {
frame += (next - frame + ed->interval - 1) &
-ed->interval;
@ -248,21 +248,25 @@ static int ohci_urb_enqueue (
* Not ASAP: Use the next slot in the stream. If
* the entire URB falls before the threshold, fail.
*/
else if (tick_before(frame + ed->interval *
} else {
if (tick_before(frame + ed->interval *
(urb->number_of_packets - 1), next)) {
retval = -EXDEV;
usb_hcd_unlink_urb_from_ep(hcd, urb);
goto fail;
}
retval = -EXDEV;
usb_hcd_unlink_urb_from_ep(hcd, urb);
goto fail;
}
/*
* Some OHCI hardware doesn't handle late TDs
* correctly. After retiring them it proceeds to
* the next ED instead of the next TD. Therefore
* we have to omit the late TDs entirely.
*/
urb_priv->td_cnt = DIV_ROUND_UP(next - frame,
ed->interval);
/*
* Some OHCI hardware doesn't handle late TDs
* correctly. After retiring them it proceeds
* to the next ED instead of the next TD.
* Therefore we have to omit the late TDs
* entirely.
*/
urb_priv->td_cnt = DIV_ROUND_UP(
(u16) (next - frame),
ed->interval);
}
}
urb->start_frame = frame;
}

44
drivers/usb/host/ohci-nxp.c
View File

@ -223,8 +223,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
isp1301_i2c_client = isp1301_get_client(isp1301_node);
if (!isp1301_i2c_client) {
ret = -EPROBE_DEFER;
goto out;
return -EPROBE_DEFER;
}
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
@ -234,7 +233,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
if (usb_disabled()) {
dev_err(&pdev->dev, "USB is disabled\n");
ret = -ENODEV;
goto out;
goto fail_disable;
}
/* Enable AHB slave USB clock, needed for further USB clock control */
@ -245,19 +244,19 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
if (IS_ERR(usb_pll_clk)) {
dev_err(&pdev->dev, "failed to acquire USB PLL\n");
ret = PTR_ERR(usb_pll_clk);
goto out1;
goto fail_pll;
}
ret = clk_enable(usb_pll_clk);
if (ret < 0) {
dev_err(&pdev->dev, "failed to start USB PLL\n");
goto out2;
goto fail_pllen;
}
ret = clk_set_rate(usb_pll_clk, 48000);
if (ret < 0) {
dev_err(&pdev->dev, "failed to set USB clock rate\n");
goto out3;
goto fail_rate;
}
/* Enable USB device clock */
@ -265,13 +264,13 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
if (IS_ERR(usb_dev_clk)) {
dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n");
ret = PTR_ERR(usb_dev_clk);
goto out4;
goto fail_dev;
}
ret = clk_enable(usb_dev_clk);
if (ret < 0) {
dev_err(&pdev->dev, "failed to start USB DEV Clock\n");
goto out5;
goto fail_deven;
}
/* Enable USB otg clocks */
@ -279,7 +278,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
if (IS_ERR(usb_otg_clk)) {
dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n");
ret = PTR_ERR(usb_otg_clk);
goto out6;
goto fail_otg;
}
__raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL);
@ -287,7 +286,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
ret = clk_enable(usb_otg_clk);
if (ret < 0) {
dev_err(&pdev->dev, "failed to start USB DEV Clock\n");
goto out7;
goto fail_otgen;
}
isp1301_configure();
@ -296,14 +295,14 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
if (!hcd) {
dev_err(&pdev->dev, "Failed to allocate HC buffer\n");
ret = -ENOMEM;
goto out8;
goto fail_hcd;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hcd->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(hcd->regs)) {
ret = PTR_ERR(hcd->regs);
goto out8;
goto fail_resource;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
@ -311,7 +310,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
ret = -ENXIO;
goto out8;
goto fail_resource;
}
nxp_start_hc();
@ -325,23 +324,24 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
return ret;
nxp_stop_hc();
out8:
fail_resource:
usb_put_hcd(hcd);
out7:
fail_hcd:
clk_disable(usb_otg_clk);
out6:
fail_otgen:
clk_put(usb_otg_clk);
out5:
fail_otg:
clk_disable(usb_dev_clk);
out4:
fail_deven:
clk_put(usb_dev_clk);
out3:
fail_dev:
fail_rate:
clk_disable(usb_pll_clk);
out2:
fail_pllen:
clk_put(usb_pll_clk);
out1:
fail_pll:
fail_disable:
isp1301_i2c_client = NULL;
out:
return ret;
}

8
drivers/usb/host/ohci-omap3.c
View File

@ -114,8 +114,6 @@ static const struct hc_driver ohci_omap3_hc_driver = {
/*-------------------------------------------------------------------------*/
static u64 omap_ohci_dma_mask = DMA_BIT_MASK(32);
/*
* configure so an HC device and id are always provided
* always called with process context; sleeping is OK
@ -168,8 +166,10 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev)
* Since shared usb code relies on it, set it here for now.
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &omap_ohci_dma_mask;
if (!dev->dma_mask)
dev->dma_mask = &dev->coherent_dma_mask;
if (!dev->coherent_dma_mask)
dev->coherent_dma_mask = DMA_BIT_MASK(32);
hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev,
dev_name(dev));

6
drivers/usb/host/ohci-pxa27x.c
View File

@ -282,8 +282,6 @@ static const struct of_device_id pxa_ohci_dt_ids[] = {
MODULE_DEVICE_TABLE(of, pxa_ohci_dt_ids);
static u64 pxa_ohci_dma_mask = DMA_BIT_MASK(32);
static int ohci_pxa_of_init(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
@ -298,7 +296,9 @@ static int ohci_pxa_of_init(struct platform_device *pdev)
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &pxa_ohci_dma_mask;
pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
if (!pdev->dev.coherent_dma_mask)
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)

6
drivers/usb/host/ohci-spear.c
View File

@ -91,8 +91,6 @@ static const struct hc_driver ohci_spear_hc_driver = {
.start_port_reset = ohci_start_port_reset,
};
static u64 spear_ohci_dma_mask = DMA_BIT_MASK(32);
static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
{
const struct hc_driver *driver = &ohci_spear_hc_driver;
@ -114,7 +112,9 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &spear_ohci_dma_mask;
pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
if (!pdev->dev.coherent_dma_mask)
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
usbh_clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(usbh_clk)) {

2
drivers/usb/host/oxu210hp-hcd.c
View File

@ -3084,7 +3084,7 @@ static int oxu_hub_status_data(struct usb_hcd *hcd, char *buf)
int ports, i, retval = 1;
unsigned long flags;
/* if !USB_SUSPEND, root hub timers won't get shut down ... */
/* if !PM_RUNTIME, root hub timers won't get shut down ... */
if (!HC_IS_RUNNING(hcd->state))
return 0;

2
drivers/usb/host/sl811-hcd.c
View File

@ -22,7 +22,7 @@
* and usb-storage.
*
* TODO:
* - usb suspend/resume triggered by sl811 (with USB_SUSPEND)
* - usb suspend/resume triggered by sl811 (with PM_RUNTIME)
* - various issues noted in the code
* - performance work; use both register banks; ...
* - use urb->iso_frame_desc[] with ISO transfers

3
drivers/usb/host/uhci-hub.c
View File

@ -225,7 +225,8 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf)
/* auto-stop if nothing connected for 1 second */
if (any_ports_active(uhci))
uhci->rh_state = UHCI_RH_RUNNING;
else if (time_after_eq(jiffies, uhci->auto_stop_time))
else if (time_after_eq(jiffies, uhci->auto_stop_time) &&
!uhci->wait_for_hp)
suspend_rh(uhci, UHCI_RH_AUTO_STOPPED);
break;

6
drivers/usb/host/uhci-platform.c
View File

@ -60,8 +60,6 @@ static const struct hc_driver uhci_platform_hc_driver = {
.hub_control = uhci_hub_control,
};
static u64 platform_uhci_dma_mask = DMA_BIT_MASK(32);
static int uhci_hcd_platform_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
@ -78,7 +76,9 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
pdev->dev.dma_mask = &platform_uhci_dma_mask;
pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
if (!pdev->dev.coherent_dma_mask)
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
hcd = usb_create_hcd(&uhci_platform_hc_driver, &pdev->dev,
pdev->name);

2
drivers/usb/host/uhci-q.c
View File

@ -1287,7 +1287,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb,
return -EINVAL; /* Can't change the period */
} else {
next = uhci->frame_number + 2;
next = uhci->frame_number + 1;
/* Find the next unused frame */
if (list_empty(&qh->queue)) {

17
drivers/usb/host/xhci-mem.c
View File

@ -1423,15 +1423,17 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
ep_ctx->ep_info2 |= cpu_to_le32(xhci_get_endpoint_type(udev, ep));
/* Set the max packet size and max burst */
max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
max_burst = 0;
switch (udev->speed) {
case USB_SPEED_SUPER:
max_packet = usb_endpoint_maxp(&ep->desc);
ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
/* dig out max burst from ep companion desc */
max_packet = ep->ss_ep_comp.bMaxBurst;
ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_packet));
max_burst = ep->ss_ep_comp.bMaxBurst;
break;
case USB_SPEED_HIGH:
/* Some devices get this wrong */
if (usb_endpoint_xfer_bulk(&ep->desc))
max_packet = 512;
/* bits 11:12 specify the number of additional transaction
* opportunities per microframe (USB 2.0, section 9.6.6)
*/
@ -1439,17 +1441,16 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
usb_endpoint_xfer_int(&ep->desc)) {
max_burst = (usb_endpoint_maxp(&ep->desc)
& 0x1800) >> 11;
ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_burst));
}
/* Fall through */
break;
case USB_SPEED_FULL:
case USB_SPEED_LOW:
max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
break;
default:
BUG();
}
ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet) |
MAX_BURST(max_burst));
max_esit_payload = xhci_get_max_esit_payload(xhci, udev, ep);
ep_ctx->tx_info = cpu_to_le32(MAX_ESIT_PAYLOAD_FOR_EP(max_esit_payload));

1
drivers/usb/musb/musb_dsps.c
View File

@ -560,6 +560,7 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
if (!config) {
dev_err(&pdev->dev,
"failed to allocate musb hdrc config\n");
ret = -ENOMEM;
goto err2;
}

3
drivers/usb/musb/omap2430.c
View File

@ -549,7 +549,8 @@ static int omap2430_probe(struct platform_device *pdev)
glue->control_otghs = omap_get_control_dev();
if (IS_ERR(glue->control_otghs)) {
dev_vdbg(&pdev->dev, "Failed to get control device\n");
return -ENODEV;
ret = PTR_ERR(glue->control_otghs);
goto err2;
}
} else {
glue->control_otghs = ERR_PTR(-ENODEV);

5
drivers/usb/phy/Kconfig
View File

@ -25,7 +25,7 @@ config AB8500_USB
config FSL_USB2_OTG
bool "Freescale USB OTG Transceiver Driver"
depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND
depends on USB_EHCI_FSL && USB_FSL_USB2 && PM_RUNTIME
select USB_OTG
help
Enable this to support Freescale USB OTG transceiver.
@ -139,7 +139,6 @@ config USB_ISP1301
tristate "NXP ISP1301 USB transceiver support"
depends on USB || USB_GADGET
depends on I2C
select USB_OTG_UTILS
help
Say Y here to add support for the NXP ISP1301 USB transceiver driver.
This chip is typically used as USB transceiver for USB host, gadget
@ -162,7 +161,7 @@ config USB_MSM_OTG
config USB_MV_OTG
tristate "Marvell USB OTG support"
depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND
depends on USB_EHCI_MV && USB_MV_UDC && PM_RUNTIME
select USB_OTG
help
Say Y here if you want to build Marvell USB OTG transciever

2
drivers/usb/phy/phy-ab8500-usb.c
View File

@ -892,8 +892,6 @@ static int ab8500_usb_remove(struct platform_device *pdev)
else if (ab->mode == USB_PERIPHERAL)
ab8500_usb_peri_phy_dis(ab);
platform_set_drvdata(pdev, NULL);
return 0;
}

1
drivers/usb/phy/phy-fsl-usb.c
View File

@ -799,6 +799,7 @@ static int fsl_otg_conf(struct platform_device *pdev)
/* initialize the otg structure */
fsl_otg_tc->phy.label = DRIVER_DESC;
fsl_otg_tc->phy.dev = &pdev->dev;
fsl_otg_tc->phy.set_power = fsl_otg_set_power;
fsl_otg_tc->phy.otg->phy = &fsl_otg_tc->phy;

3
drivers/usb/phy/phy-gpio-vbus-usb.c
View File

@ -266,6 +266,7 @@ static int __init gpio_vbus_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, gpio_vbus);
gpio_vbus->dev = &pdev->dev;
gpio_vbus->phy.label = "gpio-vbus";
gpio_vbus->phy.dev = gpio_vbus->dev;
gpio_vbus->phy.set_power = gpio_vbus_set_power;
gpio_vbus->phy.set_suspend = gpio_vbus_set_suspend;
gpio_vbus->phy.state = OTG_STATE_UNDEFINED;
@ -343,7 +344,6 @@ err_irq:
gpio_free(pdata->gpio_pullup);
gpio_free(pdata->gpio_vbus);
err_gpio:
platform_set_drvdata(pdev, NULL);
kfree(gpio_vbus->phy.otg);
kfree(gpio_vbus);
return err;
@ -365,7 +365,6 @@ static int __exit gpio_vbus_remove(struct platform_device *pdev)
if (gpio_is_valid(pdata->gpio_pullup))
gpio_free(pdata->gpio_pullup);
gpio_free(gpio);
platform_set_drvdata(pdev, NULL);
kfree(gpio_vbus->phy.otg);
kfree(gpio_vbus);

1
drivers/usb/phy/phy-isp1301.c
View File

@ -102,6 +102,7 @@ static int isp1301_probe(struct i2c_client *client,
mutex_init(&isp->mutex);
phy = &isp->phy;
phy->dev = &client->dev;
phy->label = DRV_NAME;
phy->init = isp1301_phy_init;
phy->set_vbus = isp1301_phy_set_vbus;

3
drivers/usb/phy/phy-mv-usb.c
View File

@ -667,7 +667,6 @@ int mv_otg_remove(struct platform_device *pdev)
mv_otg_disable(mvotg);
usb_remove_phy(&mvotg->phy);
platform_set_drvdata(pdev, NULL);
return 0;
}
@ -850,8 +849,6 @@ err_destroy_workqueue:
flush_workqueue(mvotg->qwork);
destroy_workqueue(mvotg->qwork);
platform_set_drvdata(pdev, NULL);
return retval;
}

3
drivers/usb/phy/phy-mxs-usb.c
View File

@ -155,6 +155,7 @@ static int mxs_phy_probe(struct platform_device *pdev)
mxs_phy->phy.set_suspend = mxs_phy_suspend;
mxs_phy->phy.notify_connect = mxs_phy_on_connect;
mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect;
mxs_phy->phy.type = USB_PHY_TYPE_USB2;
ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier);
@ -175,8 +176,6 @@ static int mxs_phy_remove(struct platform_device *pdev)
usb_remove_phy(&mxs_phy->phy);
platform_set_drvdata(pdev, NULL);
return 0;
}

2
drivers/usb/phy/phy-nop.c
View File

@ -254,8 +254,6 @@ static int nop_usb_xceiv_remove(struct platform_device *pdev)
usb_remove_phy(&nop->phy);
platform_set_drvdata(pdev, NULL);
return 0;
}

30
drivers/usb/serial/ftdi_sio.c
View File

@ -189,6 +189,8 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_BOOST_PID) },
{ USB_DEVICE(NEWPORT_VID, NEWPORT_AGILIS_PID) },
{ USB_DEVICE(NEWPORT_VID, NEWPORT_CONEX_CC_PID) },
{ USB_DEVICE(NEWPORT_VID, NEWPORT_CONEX_AGP_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
@ -924,8 +926,8 @@ static int ftdi_tiocmset(struct tty_struct *tty,
static int ftdi_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
static void ftdi_break_ctl(struct tty_struct *tty, int break_state);
static int ftdi_chars_in_buffer(struct tty_struct *tty);
static int ftdi_get_modem_status(struct tty_struct *tty,
static bool ftdi_tx_empty(struct usb_serial_port *port);
static int ftdi_get_modem_status(struct usb_serial_port *port,
unsigned char status[2]);
static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base);
@ -961,7 +963,7 @@ static struct usb_serial_driver ftdi_sio_device = {
.ioctl = ftdi_ioctl,
.set_termios = ftdi_set_termios,
.break_ctl = ftdi_break_ctl,
.chars_in_buffer = ftdi_chars_in_buffer,
.tx_empty = ftdi_tx_empty,
};
static struct usb_serial_driver * const serial_drivers[] = {
@ -2056,27 +2058,18 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
}
static int ftdi_chars_in_buffer(struct tty_struct *tty)
static bool ftdi_tx_empty(struct usb_serial_port *port)
{
struct usb_serial_port *port = tty->driver_data;
int chars;
unsigned char buf[2];
int ret;
chars = usb_serial_generic_chars_in_buffer(tty);
if (chars)
goto out;
/* Check if hardware buffer is empty. */
ret = ftdi_get_modem_status(tty, buf);
ret = ftdi_get_modem_status(port, buf);
if (ret == 2) {
if (!(buf[1] & FTDI_RS_TEMT))
chars = 1;
return false;
}
out:
dev_dbg(&port->dev, "%s - %d\n", __func__, chars);
return chars;
return true;
}
/* old_termios contains the original termios settings and tty->termios contains
@ -2268,10 +2261,9 @@ no_c_cflag_changes:
* Returns the number of status bytes retrieved (device dependant), or
* negative error code.
*/
static int ftdi_get_modem_status(struct tty_struct *tty,
static int ftdi_get_modem_status(struct usb_serial_port *port,
unsigned char status[2])
{
struct usb_serial_port *port = tty->driver_data;
struct ftdi_private *priv = usb_get_serial_port_data(port);
unsigned char *buf;
int len;
@ -2336,7 +2328,7 @@ static int ftdi_tiocmget(struct tty_struct *tty)
unsigned char buf[2];
int ret;
ret = ftdi_get_modem_status(tty, buf);
ret = ftdi_get_modem_status(port, buf);
if (ret < 0)
return ret;

2
drivers/usb/serial/ftdi_sio_ids.h
View File

@ -772,6 +772,8 @@
*/
#define NEWPORT_VID 0x104D
#define NEWPORT_AGILIS_PID 0x3000
#define NEWPORT_CONEX_CC_PID 0x3002
#define NEWPORT_CONEX_AGP_PID 0x3006
/* Interbiometrics USB I/O Board */
/* Developed for Interbiometrics by Rudolf Gugler */

31
drivers/usb/serial/generic.c
View File

@ -253,6 +253,37 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
}
EXPORT_SYMBOL_GPL(usb_serial_generic_chars_in_buffer);
void usb_serial_generic_wait_until_sent(struct tty_struct *tty, long timeout)
{
struct usb_serial_port *port = tty->driver_data;
unsigned int bps;
unsigned long period;
unsigned long expire;
bps = tty_get_baud_rate(tty);
if (!bps)
bps = 9600; /* B0 */
/*
* Use a poll-period of roughly the time it takes to send one
* character or at least one jiffy.
*/
period = max_t(unsigned long, (10 * HZ / bps), 1);
period = min_t(unsigned long, period, timeout);
dev_dbg(&port->dev, "%s - timeout = %u ms, period = %u ms\n",
__func__, jiffies_to_msecs(timeout),
jiffies_to_msecs(period));
expire = jiffies + timeout;
while (!port->serial->type->tx_empty(port)) {
schedule_timeout_interruptible(period);
if (signal_pending(current))
break;
if (time_after(jiffies, expire))
break;
}
}
EXPORT_SYMBOL_GPL(usb_serial_generic_wait_until_sent);
static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port,
int index, gfp_t mem_flags)
{

22
drivers/usb/serial/io_ti.c
View File

@ -2019,8 +2019,6 @@ static int edge_chars_in_buffer(struct tty_struct *tty)
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
int chars = 0;
unsigned long flags;
int ret;
if (edge_port == NULL)
return 0;
@ -2028,16 +2026,22 @@ static int edge_chars_in_buffer(struct tty_struct *tty)
chars = kfifo_len(&edge_port->write_fifo);
spin_unlock_irqrestore(&edge_port->ep_lock, flags);
if (!chars) {
ret = tx_active(edge_port);
if (ret > 0)
chars = ret;
}
dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
return chars;
}
static bool edge_tx_empty(struct usb_serial_port *port)
{
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
int ret;
ret = tx_active(edge_port);
if (ret > 0)
return false;
return true;
}
static void edge_throttle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
@ -2557,6 +2561,7 @@ static struct usb_serial_driver edgeport_1port_device = {
.write = edge_write,
.write_room = edge_write_room,
.chars_in_buffer = edge_chars_in_buffer,
.tx_empty = edge_tx_empty,
.break_ctl = edge_break,
.read_int_callback = edge_interrupt_callback,
.read_bulk_callback = edge_bulk_in_callback,
@ -2589,6 +2594,7 @@ static struct usb_serial_driver edgeport_2port_device = {
.write = edge_write,
.write_room = edge_write_room,
.chars_in_buffer = edge_chars_in_buffer,
.tx_empty = edge_tx_empty,
.break_ctl = edge_break,
.read_int_callback = edge_interrupt_callback,
.read_bulk_callback = edge_bulk_in_callback,

13
drivers/usb/serial/option.c
View File

@ -196,6 +196,7 @@ static void option_instat_callback(struct urb *urb);
#define DELL_PRODUCT_5800_MINICARD_VZW 0x8195 /* Novatel E362 */
#define DELL_PRODUCT_5800_V2_MINICARD_VZW 0x8196 /* Novatel E362 */
#define DELL_PRODUCT_5804_MINICARD_ATT 0x819b /* Novatel E371 */
#define KYOCERA_VENDOR_ID 0x0c88
#define KYOCERA_PRODUCT_KPC650 0x17da
@ -341,8 +342,8 @@ static void option_instat_callback(struct urb *urb);
#define CINTERION_PRODUCT_EU3_E 0x0051
#define CINTERION_PRODUCT_EU3_P 0x0052
#define CINTERION_PRODUCT_PH8 0x0053
#define CINTERION_PRODUCT_AH6 0x0055
#define CINTERION_PRODUCT_PLS8 0x0060
#define CINTERION_PRODUCT_AHXX 0x0055
#define CINTERION_PRODUCT_PLXX 0x0060
/* Olivetti products */
#define OLIVETTI_VENDOR_ID 0x0b3c
@ -771,6 +772,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5804_MINICARD_ATT, 0xff, 0xff, 0xff) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
@ -966,6 +968,8 @@ static const struct usb_device_id option_ids[] = {
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0330, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0395, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0412, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G */
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff),
@ -1264,8 +1268,9 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AH6) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLS8) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },

23
drivers/usb/serial/ti_usb_3410_5052.c
View File

@ -101,6 +101,7 @@ static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *data, int count);
static int ti_write_room(struct tty_struct *tty);
static int ti_chars_in_buffer(struct tty_struct *tty);
static bool ti_tx_empty(struct usb_serial_port *port);
static void ti_throttle(struct tty_struct *tty);
static void ti_unthrottle(struct tty_struct *tty);
static int ti_ioctl(struct tty_struct *tty,
@ -222,6 +223,7 @@ static struct usb_serial_driver ti_1port_device = {
.write = ti_write,
.write_room = ti_write_room,
.chars_in_buffer = ti_chars_in_buffer,
.tx_empty = ti_tx_empty,
.throttle = ti_throttle,
.unthrottle = ti_unthrottle,
.ioctl = ti_ioctl,
@ -253,6 +255,7 @@ static struct usb_serial_driver ti_2port_device = {
.write = ti_write,
.write_room = ti_write_room,
.chars_in_buffer = ti_chars_in_buffer,
.tx_empty = ti_tx_empty,
.throttle = ti_throttle,
.unthrottle = ti_unthrottle,
.ioctl = ti_ioctl,
@ -684,8 +687,6 @@ static int ti_chars_in_buffer(struct tty_struct *tty)
struct ti_port *tport = usb_get_serial_port_data(port);
int chars = 0;
unsigned long flags;
int ret;
u8 lsr;
if (tport == NULL)
return 0;
@ -694,16 +695,22 @@ static int ti_chars_in_buffer(struct tty_struct *tty)
chars = kfifo_len(&tport->write_fifo);
spin_unlock_irqrestore(&tport->tp_lock, flags);
if (!chars) {
ret = ti_get_lsr(tport, &lsr);
if (!ret && !(lsr & TI_LSR_TX_EMPTY))
chars = 1;
}
dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
return chars;
}
static bool ti_tx_empty(struct usb_serial_port *port)
{
struct ti_port *tport = usb_get_serial_port_data(port);
int ret;
u8 lsr;
ret = ti_get_lsr(tport, &lsr);
if (!ret && !(lsr & TI_LSR_TX_EMPTY))
return false;
return true;
}
static void ti_throttle(struct tty_struct *tty)
{

30
drivers/usb/serial/usb-serial.c
View File

@ -359,20 +359,29 @@ static int serial_chars_in_buffer(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
int count = 0;
dev_dbg(tty->dev, "%s\n", __func__);
mutex_lock(&serial->disc_mutex);
/* if the device was unplugged then any remaining characters
fell out of the connector ;) */
if (serial->disconnected)
count = 0;
else
count = serial->type->chars_in_buffer(tty);
mutex_unlock(&serial->disc_mutex);
return 0;
return count;
return serial->type->chars_in_buffer(tty);
}
static void serial_wait_until_sent(struct tty_struct *tty, int timeout)
{
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
dev_dbg(tty->dev, "%s\n", __func__);
if (!port->serial->type->wait_until_sent)
return;
mutex_lock(&serial->disc_mutex);
if (!serial->disconnected)
port->serial->type->wait_until_sent(tty, timeout);
mutex_unlock(&serial->disc_mutex);
}
static void serial_throttle(struct tty_struct *tty)
@ -1191,6 +1200,7 @@ static const struct tty_operations serial_ops = {
.unthrottle = serial_unthrottle,
.break_ctl = serial_break,
.chars_in_buffer = serial_chars_in_buffer,
.wait_until_sent = serial_wait_until_sent,
.tiocmget = serial_tiocmget,
.tiocmset = serial_tiocmset,
.get_icount = serial_get_icount,
@ -1316,6 +1326,8 @@ static void usb_serial_operations_init(struct usb_serial_driver *device)
set_to_generic_if_null(device, close);
set_to_generic_if_null(device, write_room);
set_to_generic_if_null(device, chars_in_buffer);
if (device->tx_empty)
set_to_generic_if_null(device, wait_until_sent);
set_to_generic_if_null(device, read_bulk_callback);
set_to_generic_if_null(device, write_bulk_callback);
set_to_generic_if_null(device, process_read_urb);

8
drivers/usb/storage/realtek_cr.c
View File

@ -105,8 +105,9 @@ struct rts51x_chip {
int status_len;
u32 flag;
#ifdef CONFIG_REALTEK_AUTOPM
struct us_data *us;
#ifdef CONFIG_REALTEK_AUTOPM
struct timer_list rts51x_suspend_timer;
unsigned long timer_expires;
int pwr_state;
@ -988,6 +989,7 @@ static int init_realtek_cr(struct us_data *us)
us->extra = chip;
us->extra_destructor = realtek_cr_destructor;
us->max_lun = chip->max_lun = rts51x_get_max_lun(us);
chip->us = us;
usb_stor_dbg(us, "chip->max_lun = %d\n", chip->max_lun);
@ -1010,10 +1012,8 @@ static int init_realtek_cr(struct us_data *us)
SET_AUTO_DELINK(chip);
}
#ifdef CONFIG_REALTEK_AUTOPM
if (ss_en) {
chip->us = us;
if (ss_en)
realtek_cr_autosuspend_setup(us);
}
#endif
usb_stor_dbg(us, "chip->flag = 0x%x\n", chip->flag);

5
include/linux/usb/gadget.h
View File

@ -563,9 +563,8 @@ static inline int gadget_is_dualspeed(struct usb_gadget *g)
}
/**
* gadget_is_superspeed() - return true if the hardware handles
* supperspeed
* @g: controller that might support supper speed
* gadget_is_superspeed() - return true if the hardware handles superspeed
* @g: controller that might support superspeed
*/
static inline int gadget_is_superspeed(struct usb_gadget *g)
{

4
include/linux/usb/serial.h
View File

@ -268,6 +268,8 @@ struct usb_serial_driver {
struct usb_serial_port *port, struct ktermios *old);
void (*break_ctl)(struct tty_struct *tty, int break_state);
int (*chars_in_buffer)(struct tty_struct *tty);
void (*wait_until_sent)(struct tty_struct *tty, long timeout);
bool (*tx_empty)(struct usb_serial_port *port);
void (*throttle)(struct tty_struct *tty);
void (*unthrottle)(struct tty_struct *tty);
int (*tiocmget)(struct tty_struct *tty);
@ -327,6 +329,8 @@ extern void usb_serial_generic_close(struct usb_serial_port *port);
extern int usb_serial_generic_resume(struct usb_serial *serial);
extern int usb_serial_generic_write_room(struct tty_struct *tty);
extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty);
extern void usb_serial_generic_wait_until_sent(struct tty_struct *tty,
long timeout);
extern void usb_serial_generic_read_bulk_callback(struct urb *urb);
extern void usb_serial_generic_write_bulk_callback(struct urb *urb);
extern void usb_serial_generic_throttle(struct tty_struct *tty);