ASoC: max98090: Add recovery for PLL lock failure
All MAX98090 input clocks MCLK, LRCLK and BCLK must be running and stable before powering on the codec in slave mode. Otherwise the PLL may not lock to LRCLK causing silence in playback and capture. How often that happens is somewhat hardware and clock configuration specific. Now if wanting to follow strictly this clocks must be active before powering the codec on requirement we should have a notification from DAI driver to codec driver when clocks are activated and take codec out of shutdown only after that. Plus take care of possible active bypass paths. However, when PLL unlock occurs, MAX98090 asserts the PLL Unlock Flag which can be configured as an IRQ source. This allows to workaround around the issue by toggling the codec power shortly in case of PLL lock failure. In order to prevent needlessly toggling codec power in case of short PLL unlocks at the beginning of stream this patch implements delayed activation for PLL unlock interrupt. Then workaround is run only when the PLL doesn't lock at all. Power toggling workaround for PLL unlock comes originally from Liam Girdwood <liam.r.girdwood@linux.intel.com> and delayed activation from me. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
7d1311b93e
commit
b8a3ee820f
|
@ -1972,6 +1972,102 @@ static int max98090_dai_digital_mute(struct snd_soc_dai *codec_dai, int mute)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int max98090_dai_trigger(struct snd_pcm_substream *substream, int cmd,
|
||||
struct snd_soc_dai *dai)
|
||||
{
|
||||
struct snd_soc_codec *codec = dai->codec;
|
||||
struct max98090_priv *max98090 = snd_soc_codec_get_drvdata(codec);
|
||||
|
||||
switch (cmd) {
|
||||
case SNDRV_PCM_TRIGGER_START:
|
||||
case SNDRV_PCM_TRIGGER_RESUME:
|
||||
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
||||
if (!max98090->master && dai->active == 1)
|
||||
queue_delayed_work(system_power_efficient_wq,
|
||||
&max98090->pll_det_enable_work,
|
||||
msecs_to_jiffies(10));
|
||||
break;
|
||||
case SNDRV_PCM_TRIGGER_STOP:
|
||||
case SNDRV_PCM_TRIGGER_SUSPEND:
|
||||
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
||||
if (!max98090->master && dai->active == 1)
|
||||
schedule_work(&max98090->pll_det_disable_work);
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void max98090_pll_det_enable_work(struct work_struct *work)
|
||||
{
|
||||
struct max98090_priv *max98090 =
|
||||
container_of(work, struct max98090_priv,
|
||||
pll_det_enable_work.work);
|
||||
struct snd_soc_codec *codec = max98090->codec;
|
||||
unsigned int status, mask;
|
||||
|
||||
/*
|
||||
* Clear status register in order to clear possibly already occurred
|
||||
* PLL unlock. If PLL hasn't still locked, the status will be set
|
||||
* again and PLL unlock interrupt will occur.
|
||||
* Note this will clear all status bits
|
||||
*/
|
||||
regmap_read(max98090->regmap, M98090_REG_DEVICE_STATUS, &status);
|
||||
|
||||
/*
|
||||
* Queue jack work in case jack state has just changed but handler
|
||||
* hasn't run yet
|
||||
*/
|
||||
regmap_read(max98090->regmap, M98090_REG_INTERRUPT_S, &mask);
|
||||
status &= mask;
|
||||
if (status & M98090_JDET_MASK)
|
||||
queue_delayed_work(system_power_efficient_wq,
|
||||
&max98090->jack_work,
|
||||
msecs_to_jiffies(100));
|
||||
|
||||
/* Enable PLL unlock interrupt */
|
||||
snd_soc_update_bits(codec, M98090_REG_INTERRUPT_S,
|
||||
M98090_IULK_MASK,
|
||||
1 << M98090_IULK_SHIFT);
|
||||
}
|
||||
|
||||
static void max98090_pll_det_disable_work(struct work_struct *work)
|
||||
{
|
||||
struct max98090_priv *max98090 =
|
||||
container_of(work, struct max98090_priv, pll_det_disable_work);
|
||||
struct snd_soc_codec *codec = max98090->codec;
|
||||
|
||||
cancel_delayed_work_sync(&max98090->pll_det_enable_work);
|
||||
|
||||
/* Disable PLL unlock interrupt */
|
||||
snd_soc_update_bits(codec, M98090_REG_INTERRUPT_S,
|
||||
M98090_IULK_MASK, 0);
|
||||
}
|
||||
|
||||
static void max98090_pll_work(struct work_struct *work)
|
||||
{
|
||||
struct max98090_priv *max98090 =
|
||||
container_of(work, struct max98090_priv, pll_work);
|
||||
struct snd_soc_codec *codec = max98090->codec;
|
||||
|
||||
if (!snd_soc_codec_is_active(codec))
|
||||
return;
|
||||
|
||||
dev_info(codec->dev, "PLL unlocked\n");
|
||||
|
||||
/* Toggle shutdown OFF then ON */
|
||||
snd_soc_update_bits(codec, M98090_REG_DEVICE_SHUTDOWN,
|
||||
M98090_SHDNN_MASK, 0);
|
||||
msleep(10);
|
||||
snd_soc_update_bits(codec, M98090_REG_DEVICE_SHUTDOWN,
|
||||
M98090_SHDNN_MASK, M98090_SHDNN_MASK);
|
||||
|
||||
/* Give PLL time to lock */
|
||||
msleep(10);
|
||||
}
|
||||
|
||||
static void max98090_jack_work(struct work_struct *work)
|
||||
{
|
||||
struct max98090_priv *max98090 = container_of(work,
|
||||
|
@ -2103,8 +2199,10 @@ static irqreturn_t max98090_interrupt(int irq, void *data)
|
|||
if (active & M98090_SLD_MASK)
|
||||
dev_dbg(codec->dev, "M98090_SLD_MASK\n");
|
||||
|
||||
if (active & M98090_ULK_MASK)
|
||||
dev_err(codec->dev, "M98090_ULK_MASK\n");
|
||||
if (active & M98090_ULK_MASK) {
|
||||
dev_dbg(codec->dev, "M98090_ULK_MASK\n");
|
||||
schedule_work(&max98090->pll_work);
|
||||
}
|
||||
|
||||
if (active & M98090_JDET_MASK) {
|
||||
dev_dbg(codec->dev, "M98090_JDET_MASK\n");
|
||||
|
@ -2177,6 +2275,7 @@ static struct snd_soc_dai_ops max98090_dai_ops = {
|
|||
.set_tdm_slot = max98090_set_tdm_slot,
|
||||
.hw_params = max98090_dai_hw_params,
|
||||
.digital_mute = max98090_dai_digital_mute,
|
||||
.trigger = max98090_dai_trigger,
|
||||
};
|
||||
|
||||
static struct snd_soc_dai_driver max98090_dai[] = {
|
||||
|
@ -2258,6 +2357,11 @@ static int max98090_probe(struct snd_soc_codec *codec)
|
|||
max98090->jack_state = M98090_JACK_STATE_NO_HEADSET;
|
||||
|
||||
INIT_DELAYED_WORK(&max98090->jack_work, max98090_jack_work);
|
||||
INIT_DELAYED_WORK(&max98090->pll_det_enable_work,
|
||||
max98090_pll_det_enable_work);
|
||||
INIT_WORK(&max98090->pll_det_disable_work,
|
||||
max98090_pll_det_disable_work);
|
||||
INIT_WORK(&max98090->pll_work, max98090_pll_work);
|
||||
|
||||
/* Enable jack detection */
|
||||
snd_soc_write(codec, M98090_REG_JACK_DETECT,
|
||||
|
@ -2310,6 +2414,9 @@ static int max98090_remove(struct snd_soc_codec *codec)
|
|||
struct max98090_priv *max98090 = snd_soc_codec_get_drvdata(codec);
|
||||
|
||||
cancel_delayed_work_sync(&max98090->jack_work);
|
||||
cancel_delayed_work_sync(&max98090->pll_det_enable_work);
|
||||
cancel_work_sync(&max98090->pll_det_disable_work);
|
||||
cancel_work_sync(&max98090->pll_work);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
|
@ -1532,6 +1532,9 @@ struct max98090_priv {
|
|||
int irq;
|
||||
int jack_state;
|
||||
struct delayed_work jack_work;
|
||||
struct delayed_work pll_det_enable_work;
|
||||
struct work_struct pll_det_disable_work;
|
||||
struct work_struct pll_work;
|
||||
struct snd_soc_jack *jack;
|
||||
unsigned int dai_fmt;
|
||||
int tdm_slots;
|
||||
|
|
Loading…
Reference in a new issue