ARM: nomadik: add FSMC NAND

This adds the FSMC NAND driver and flash partitions to the Nomadik
device tree.

The only compatible string accepted by this driver is currently
"st,spear600-fsmc-nand" which is inappropriate for this system, so
this patch adds the compatible value "stericsson,fsmc-nand" as
well.

Cc: linux-mtd@vger.kernel.org
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Documentation/devicetree/bindings/mtd/fsmc-nand.txt

@@ -1,7 +1,7 @@
 * FSMC NAND
 
 Required properties:
-- compatible : "st,spear600-fsmc-nand"
+- compatible : "st,spear600-fsmc-nand", "stericsson,fsmc-nand"
 - reg : Address range of the mtd chip
 - reg-names: Should contain the reg names "fsmc_regs", "nand_data", "nand_addr" and "nand_cmd"
 

arch/arm/boot/dts/ste-nomadik-stn8815.dtsi

@@ -35,6 +35,44 @@
 		interrupts = <5>;
 	};
 
+	/* A NAND flash of 128 MiB */
+	fsmc: flash@40000000 {
+		compatible = "stericsson,fsmc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x10100000 0x1000>,	/* FSMC Register*/
+			<0x40000000 0x2000>,	/* NAND Base DATA */
+			<0x41000000 0x2000>,	/* NAND Base ADDR */
+			<0x40800000 0x2000>;	/* NAND Base CMD */
+		reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
+		status = "okay";
+
+		partition@0 {
+		label = "X-Loader(NAND)";
+			reg = <0x0 0x40000>;
+		};
+		partition@40000 {
+			label = "MemInit(NAND)";
+			reg = <0x40000 0x40000>;
+		};
+		partition@80000 {
+			label = "BootLoader(NAND)";
+			reg = <0x80000 0x200000>;
+		};
+		partition@280000 {
+			label = "Kernel zImage(NAND)";
+			reg = <0x280000 0x300000>;
+		};
+		partition@580000 {
+			label = "Root Filesystem(NAND)";
+			reg = <0x580000 0x1600000>;
+		};
+		partition@1b80000 {
+			label = "User Filesystem(NAND)";
+			reg = <0x1b80000 0x6480000>;
+		};
+	};
+
 	amba {
 		compatible = "arm,amba-bus";
 		#address-cells = <1>;

arch/arm/mach-nomadik/cpu-8815.c

@@ -33,6 +33,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
+#include <linux/mtd/fsmc.h>
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
@@ -249,6 +250,17 @@ static void __init cpu8815_timer_init_of(void)
 	nmdk_timer_init(base, irq);
 }
 
+static struct fsmc_nand_timings cpu8815_nand_timings = {
+	.thiz	= 0,
+	.thold	= 0x10,
+	.twait	= 0x0A,
+	.tset	= 0,
+};
+
+static struct fsmc_nand_platform_data cpu8815_nand_data = {
+	.nand_timings = &cpu8815_nand_timings,
+};
+
 /* These are mostly to get the right device names for the clock lookups */
 static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART0_BASE,
@@ -259,6 +271,9 @@ static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = {
 		"rng", NULL),
 	OF_DEV_AUXDATA("arm,primecell", NOMADIK_RTC_BASE,
 		"rtc-pl031", NULL),
+	OF_DEV_AUXDATA("stericsson,fsmc-nand", NOMADIK_FSMC_BASE,
+		"fsmc-nand", &cpu8815_nand_data),
+
 	{ /* sentinel */ },
 };
 

drivers/mtd/nand/fsmc_nand.c

@@ -1218,6 +1218,7 @@ static SIMPLE_DEV_PM_OPS(fsmc_nand_pm_ops, fsmc_nand_suspend, fsmc_nand_resume);
 #ifdef CONFIG_OF
 static const struct of_device_id fsmc_nand_id_table[] = {
 	{ .compatible = "st,spear600-fsmc-nand" },
+	{ .compatible = "stericsson,fsmc-nand" },
 	{}
 };
 MODULE_DEVICE_TABLE(of, fsmc_nand_id_table);